diff options
Diffstat (limited to 'dom/interfaces/base/nsIDOMWindowUtils.idl')
| -rw-r--r-- | dom/interfaces/base/nsIDOMWindowUtils.idl | 2331 |
1 files changed, 2331 insertions, 0 deletions
diff --git a/dom/interfaces/base/nsIDOMWindowUtils.idl b/dom/interfaces/base/nsIDOMWindowUtils.idl new file mode 100644 index 0000000000..82f7d4d206 --- /dev/null +++ b/dom/interfaces/base/nsIDOMWindowUtils.idl @@ -0,0 +1,2331 @@ +/* -*- Mode: IDL; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#include "nsISupports.idl" +#include "domstubs.idl" + +/** + * nsIDOMWindowUtils is intended for infrequently-used methods related + * to the current nsIDOMWindow. Some of the methods may require + * elevated privileges; the method implementations should contain the + * necessary security checks. Access this interface by calling + * getInterface on a DOMWindow. + * + * WARNING: Do not use 'out jsval' parameters in this file. + * SpecialPowers, which is used to access nsIDOMWindowUtils + * in plain mochitests, does not know how to handle them. + * (Use 'jsval' return values instead.) + */ + +%{C++ +#include "nsColor.h" +class gfxContext; +struct nsRect; +%} + +[ref] native nsConstRect(const nsRect); +native nscolor(nscolor); +[ptr] native gfxContext(gfxContext); + +interface nsIArray; +interface nsICycleCollectorListener; +interface nsIPreloadedStyleSheet; +interface nsITransferable; +interface nsIQueryContentEventResult; +interface nsIDOMWindow; +interface nsIFile; +interface nsIURI; +interface nsIRunnable; +interface nsITranslationNodeList; +interface nsIJSRAIIHelper; +interface nsIContentPermissionRequest; +interface nsIObserver; + +webidl Animation; +webidl DOMRect; +webidl Element; +webidl EventTarget; +webidl Event; +webidl Node; +webidl NodeList; +webidl Storage; + +[builtinclass, scriptable, uuid(4d6732ca-9da7-4176-b8a1-8dde15cd0bf9)] +interface nsIDOMWindowUtils : nsISupports { + + /** + * Image animation mode of the window. When this attribute's value + * is changed, the implementation should set all images in the window + * to the given value. That is, when set to kDontAnimMode, all images + * will stop animating. The attribute's value must be one of the + * animationMode values from imgIContainer. + * @note Images may individually override the window's setting after + * the window's mode is set. Therefore images given different modes + * since the last setting of the window's mode may behave + * out of line with the window's overall mode. + * @note The attribute's value is the window's overall mode. It may + * for example continue to report kDontAnimMode after all images + * have subsequently been individually animated. + * @note Only images immediately in this window are affected; + * this is not recursive to subwindows. + * @see imgIContainer + */ + attribute unsigned short imageAnimationMode; + + /** + * Whether the charset of the window's current document has been forced by + * the user. + * Cannot be accessed from unprivileged context (not content-accessible) + */ + readonly attribute boolean docCharsetIsForced; + + /** + * Return the conversion of a physical millimeter in CSS pixels. + */ + readonly attribute float physicalMillimeterInCSSPixels; + + /** + * Function to get metadata associated with the window's current document + * @param aName the name of the metadata. This should be all lowercase. + * @return the value of the metadata, or the empty string if it's not set + * + * Will throw a DOM security error if called without chrome privileges. + */ + AString getDocumentMetadata(in AString aName); + + /** + * Relative to the top-level document. + * + * @param aX 0, if there's no such location. + * @param aY 0, if there's no such location. + */ + void getLastOverWindowPointerLocationInCSSPixels(out float aX, out float aY); + + /** + * Force a synchronous layer transaction for this window if necessary. + */ + [can_run_script] + void updateLayerTree(); + + /** + * Get the last used layer transaction id for this window's refresh driver. + */ + readonly attribute unsigned long long lastTransactionId; + + /** + * Information retrieved from the <meta name="viewport"> tag. + * See Document::GetViewportInfo for more information. + */ + void getViewportInfo(in uint32_t aDisplayWidth, in uint32_t aDisplayHeight, + out double aDefaultZoom, out boolean aAllowZoom, + out double aMinZoom, out double aMaxZoom, + out uint32_t aWidth, out uint32_t aHeight, + out boolean aAutoSize); + /* + * Information retrieved from the viewport-fit value of <meta name="viewport"> + * element. + */ + AString getViewportFitInfo(); + + /** + * Information about the window size in device pixels. + */ + void getContentViewerSize(out uint32_t aDisplayWidth, out uint32_t aDisplayHeight); + + /** + * For any scrollable element, this allows you to override the default + * scroll behaviour and force autodir (which allows a mousewheel to + * horizontally scroll regions that only scroll on that one axis). + * + * See the documentation for mousewheel.autodir.enabled and + * mousewheel.autodir.honourroot for a more thorough explanation of + * what these behaviours do. + */ + void setMousewheelAutodir(in Element aElement, in boolean aEnabled, in boolean aHonourRoot); + + /** + * For any scrollable element, this allows you to override the + * visible region and draw more than what is visible, which is + * useful for asynchronous drawing. The "displayport" will be + * <xPx, yPx, widthPx, heightPx> in units of CSS pixels, + * regardless of the size of the enclosing container. This + * will *not* trigger reflow. + * + * For the root scroll area, pass in the root document element. + * For scrollable elements, pass in the container element (for + * instance, the element with overflow: scroll). + * + * <x, y> is relative to the top-left of what would normally be + * the visible area of the element. This means that the pixels + * rendered to the displayport take scrolling into account, + * for example. + * + * It's legal to set a displayport that extends beyond the overflow + * area in any direction (left/right/top/bottom). + * + * It's also legal to set a displayport that extends beyond the + * area's bounds. No pixels are rendered outside the area bounds. + * + * The caller of this method must have chrome privileges. + * + * Calling this will always force a recomposite, so it should be + * avoided if at all possible. Client code should do checks before + * calling this so that duplicate sets are not made with the same + * displayport. + * + * aPriority is recorded along with the displayport rectangle. If this + * method is called with a lower priority than the current priority, the + * call is ignored. + */ + void setDisplayPortForElement(in float aXPx, in float aYPx, + in float aWidthPx, in float aHeightPx, + in Element aElement, + in uint32_t aPriority); + /** + * An alternate way to represent a displayport rect as a set of margins and a + * base rect to apply those margins to. A consumer of pixels may ask for as + * many extra pixels as it would like in each direction. Layout then sets + * the base rect to the "visible rect" of the element, which is just the + * subrect of the element that is drawn (it does not take in account content + * covering the element). + * + * If both a displayport rect and displayport margins with corresponding base + * rect are set with the same priority then the margins will take precendence. + * + * Specifying an alignment value will ensure that after the base rect has + * been expanded by the displayport margins, it will be further expanded so + * that each edge is located at a multiple of the "alignment" value. + * + * Note that both the margin values and alignment are treated as values in + * ScreenPixels. Refer to layout/base/Units.h for a description of this unit. + * The base rect values are in app units. + */ + void setDisplayPortMarginsForElement(in float aLeftMargin, + in float aTopMargin, + in float aRightMargin, + in float aBottomMargin, + in Element aElement, + in uint32_t aPriority); + + void setDisplayPortBaseForElement(in int32_t aX, + in int32_t aY, + in int32_t aWidth, + in int32_t aHeight, + in Element aElement); + + /** + * If |aElement| is a scroll container, returns the amount of layout + * space taken up by its scrollbars (that is, the width of the vertical + * scrollbar and the height of the horizontal scrollbar) in CSS pixels; + * otherwise returns zero. + * + * Note that on some platforms, scrollbars don't take up layout space + * ("overlay scrollbars"). On such platforms, the returned sizes are + * always zero. + * + * Layout scrollbars that normally take up space but were only shown to + * scroll the visual viewport inside the layout viewport (the layout viewport + * cannot be scrolled) do not take up space but they still return their size + * from this function. + */ + void getScrollbarSizes(in Element aElement, + out uint32_t aVerticalScrollbarWidth, + out uint32_t aHorizontalScrollbarHeight); + + /** + * Get/set the resolution at which rescalable web content is drawn for + * testing purposes. + * + * Setting a new resolution does *not* trigger reflow. This API is + * entirely separate from textZoom and fullZoom; a resolution scale + * can be applied together with both textZoom and fullZoom. + * + * The effect of this API is for gfx code to allocate more or fewer + * pixels for rescalable content by a factor of |resolution| in + * both dimensions. + * + * In addition, the content is scaled by the amount of the resolution, + * so that it is displayed at a correspondingly larger or smaller size, + * without the need for the caller to set an additional transform. + * + * The purpose of this API is to allow tests to simulate many of the effects + * a non-reflowing scale-zoom, e.g. for pinch-zoom on mobile platforms, and + * should be only used for testing purposes. + * + * The caller of this method must have chrome privileges. + * + * This is intended to be used by test code only! + */ + void setResolutionAndScaleTo(in float aResolution); + + float getResolution(); + + /** + * Set a resolution on the presShell which is the "restored" from history. + * The display dimensions are compared to their current values and used + * to scale the resolution value if necessary, e.g. if the device was + * rotated between saving and restoring of the session data. + * This resolution should be used when painting for the first time. Calling + * this too late may have no effect. + */ + void setRestoreResolution(in float aResolution, + in uint32_t aDisplayWidth, + in uint32_t aDisplayHeight); + + /** + * Whether the next paint should be flagged as the first paint for a document. + * This gives a way to track the next paint that occurs after the flag is + * set. The flag gets cleared after the next paint. + * + * Can only be accessed with chrome privileges. + */ + attribute boolean isFirstPaint; + + uint32_t getPresShellId(); + + /** + * Returns whether a given header and value is a CORS-safelisted request + * header per https://fetch.spec.whatwg.org/#cors-safelisted-request-header + */ + boolean isCORSSafelistedRequestHeader(in ACString name, in ACString value); + + /** + * Following modifiers are for sent*Event() except sendNative*Event(). + * NOTE: MODIFIER_ALT, MODIFIER_CONTROL, MODIFIER_SHIFT and MODIFIER_META + * are must be same values as Event_Binding::*_MASK for backward + * compatibility. + */ + const long MODIFIER_ALT = 0x0001; + const long MODIFIER_CONTROL = 0x0002; + const long MODIFIER_SHIFT = 0x0004; + const long MODIFIER_META = 0x0008; + const long MODIFIER_ALTGRAPH = 0x0010; + const long MODIFIER_CAPSLOCK = 0x0020; + const long MODIFIER_FN = 0x0040; + const long MODIFIER_FNLOCK = 0x0080; + const long MODIFIER_NUMLOCK = 0x0100; + const long MODIFIER_SCROLLLOCK = 0x0200; + const long MODIFIER_SYMBOL = 0x0400; + const long MODIFIER_SYMBOLLOCK = 0x0800; + const long MODIFIER_OS = 0x1000; + + /** Synthesize a mouse event. The event types supported are: + * mousedown, mouseup, mousemove, mouseover, mouseout, mousecancel, + * contextmenu, MozMouseHittest + * + * Events are sent in coordinates offset by aX and aY from the window. + * + * Note that additional events may be fired as a result of this call. For + * instance, typically a click event will be fired as a result of a + * mousedown and mouseup in sequence. + * + * Normally at this level of events, the mouseover and mouseout events are + * only fired when the window is entered or exited. For inter-element + * mouseover and mouseout events, a movemove event fired on the new element + * should be sufficient to generate the correct over and out events as well. + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * The event is dispatched via the toplevel window, so it could go to any + * window under the toplevel window, in some cases it could never reach this + * window at all. + * + * NOTE: mousecancel is used to represent the vanishing of an input device + * such as a pen leaving its digitizer by synthesizing a WidgetMouseEvent, + * whose mMessage is eMouseExitFromWidget and mExitFrom is + * WidgetMouseEvent::eTopLevel. + * + * @param aType event type + * @param aX x offset in CSS pixels + * @param aY y offset in CSS pixels + * @param aButton button to synthesize + * @param aClickCount number of clicks that have been performed + * @param aModifiers modifiers pressed, using constants defined as MODIFIER_* + * @param aIgnoreRootScrollFrame whether the event should ignore viewport bounds + * during dispatch + * @param aPressure touch input pressure: 0.0 -> 1.0 + * @param aInputSourceArg input source, see MouseEvent for values, + * defaults to mouse input. + * @param aIsDOMEventSynthesized controls Event.isSynthesized value + * that helps identifying test related events, + * defaults to true + * @param aIsWidgetEventSynthesized controls WidgetMouseEvent.mReason value + * defaults to false (WidgetMouseEvent::eReal) + * @param aIdentifier A unique identifier for the pointer causing the event, + * defaulting to nsIDOMWindowUtils::DEFAULT_MOUSE_POINTER_ID. + * + * returns true if the page called prevent default on this event + */ + [optional_argc, can_run_script] + boolean sendMouseEvent(in AString aType, + in float aX, + in float aY, + in long aButton, + in long aClickCount, + in long aModifiers, + [optional] in boolean aIgnoreRootScrollFrame, + [optional] in float aPressure, + [optional] in unsigned short aInputSourceArg, + [optional] in boolean aIsDOMEventSynthesized, + [optional] in boolean aIsWidgetEventSynthesized, + [optional] in long aButtons, + [optional] in unsigned long aIdentifier); + + /** Synthesize a touch event. The event types supported are: + * touchstart, touchend, touchmove, and touchcancel + * + * Events are sent in coordinates offset by aX and aY from the window. + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * The event is dispatched via the toplevel window, so it could go to any + * window under the toplevel window, in some cases it could never reach this + * window at all. + * + * @param aType event type + * @param xs array of offsets in CSS pixels for each touch to be sent + * @param ys array of offsets in CSS pixels for each touch to be sent + * @param rxs array of radii in CSS pixels for each touch to be sent + * @param rys array of radii in CSS pixels for each touch to be sent + * @param rotationAngles array of angles in degrees for each touch to be sent + * @param forces array of forces (floats from 0 to 1) for each touch to be sent + * @param tiltXs array of tiltX for each touch to be sent + * @param tiltYs array of tiltY for each touch to be sent + * @param twists array of twist for each touch to be sent + * @param count number of touches in this set + * @param aModifiers modifiers pressed, using constants defined as MODIFIER_* + * @param aIgnoreRootScrollFrame whether the event should ignore viewport bounds + * during dispatch + * + * returns true if the page called prevent default on this touch event + */ + [can_run_script] + boolean sendTouchEvent(in AString aType, + in Array<uint32_t> aIdentifiers, + in Array<int32_t> aXs, + in Array<int32_t> aYs, + in Array<uint32_t> aRxs, + in Array<uint32_t> aRys, + in Array<float> aRotationAngles, + in Array<float> aForces, + in Array<long> aTiltXs, + in Array<long> aTiltYs, + in Array<long> aTwists, + in long aModifiers, + [optional] in boolean aIgnoreRootScrollFrame); + + /** The same as sendMouseEvent but ensures that the event is dispatched to + * this DOM window or one of its children. + */ + [optional_argc, can_run_script] + void sendMouseEventToWindow(in AString aType, + in float aX, + in float aY, + in long aButton, + in long aClickCount, + in long aModifiers, + [optional] in boolean aIgnoreRootScrollFrame, + [optional] in float aPressure, + [optional] in unsigned short aInputSourceArg, + [optional] in boolean aIsDOMEventSynthesized, + [optional] in boolean aIsWidgetEventSynthesized, + [optional] in long aButtons, + [optional] in unsigned long aIdentifier); + + /** The same as sendTouchEvent but ensures that the event is dispatched to + * this DOM window or one of its children. + */ + [can_run_script] + boolean sendTouchEventToWindow(in AString aType, + in Array<uint32_t> aIdentifiers, + in Array<int32_t> aXs, + in Array<int32_t> aYs, + in Array<uint32_t> aRxs, + in Array<uint32_t> aRys, + in Array<float> aRotationAngles, + in Array<float> aForces, + in Array<long> aTiltXs, + in Array<long> aTiltYs, + in Array<long> aTwists, + in long aModifiers, + [optional] in boolean aIgnoreRootScrollFrame); + + /** Synthesize a wheel event for a window. The event types supported is only + * wheel. + * + * Events are sent in coordinates offset by aX and aY from the window. + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * @param aX x offset in CSS pixels + * @param aY y offset in CSS pixels + * @param aDeltaX deltaX value. + * @param aDeltaY deltaY value. + * @param aDeltaZ deltaZ value. + * @param aDeltaMode deltaMode value which must be one of the + * WheelEvent DOM_DELTA_* constants. + * @param aModifiers modifiers pressed, using constants defined as + * MODIFIER_* + * @param aLineOrPageDeltaX If you set this value non-zero for + * DOM_DELTA_PIXEL event, EventStateManager will + * dispatch NS_MOUSE_SCROLL event for horizontal + * scroll. + * @param aLineOrPageDeltaY If you set this value non-zero for + * DOM_DELTA_PIXEL event, EventStateManager will + * dispatch NS_MOUSE_SCROLL event for vertical + * scroll. + * @param aOptions Set following flags. + */ + const unsigned long WHEEL_EVENT_CAUSED_BY_NO_LINE_OR_PAGE_DELTA_DEVICE = 0x0001; + const unsigned long WHEEL_EVENT_CAUSED_BY_MOMENTUM = 0x0002; + const unsigned long WHEEL_EVENT_CUSTOMIZED_BY_USER_PREFS = 0x0004; + // If any of the following flags is specified this method will throw an + // exception in case the relevant overflowDelta has an unexpected value. + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_X_ZERO = 0x0010; + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_X_POSITIVE = 0x0020; + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_X_NEGATIVE = 0x0040; + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_Y_ZERO = 0x0100; + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_Y_POSITIVE = 0x0200; + const unsigned long WHEEL_EVENT_EXPECTED_OVERFLOW_DELTA_Y_NEGATIVE = 0x0400; + void sendWheelEvent(in float aX, + in float aY, + in double aDeltaX, + in double aDeltaY, + in double aDeltaZ, + in unsigned long aDeltaMode, + in long aModifiers, + in long aLineOrPageDeltaX, + in long aLineOrPageDeltaY, + in unsigned long aOptions); + + /** + * Native modifiers for sendNativeKeyEvent and sendNativeMouseEvent. + * TODO: The other sendNative*Event should take these values instead. + */ + const unsigned long NATIVE_MODIFIER_CAPS_LOCK = 0x00000001; + const unsigned long NATIVE_MODIFIER_NUM_LOCK = 0x00000002; + const unsigned long NATIVE_MODIFIER_SHIFT_LEFT = 0x00000100; + const unsigned long NATIVE_MODIFIER_SHIFT_RIGHT = 0x00000200; + const unsigned long NATIVE_MODIFIER_CONTROL_LEFT = 0x00000400; + const unsigned long NATIVE_MODIFIER_CONTROL_RIGHT = 0x00000800; + const unsigned long NATIVE_MODIFIER_ALT_LEFT = 0x00001000; + const unsigned long NATIVE_MODIFIER_ALT_RIGHT = 0x00002000; + const unsigned long NATIVE_MODIFIER_COMMAND_LEFT = 0x00004000; + const unsigned long NATIVE_MODIFIER_COMMAND_RIGHT = 0x00008000; + const unsigned long NATIVE_MODIFIER_HELP = 0x00010000; + // On Windows, AltGraph key emulates the AltRight key on specific keyboard + // layouts. Therefore, this shouldn't be used without `synthesizeNativeKey`. + const unsigned long NATIVE_MODIFIER_ALT_GRAPH = 0x00020000; + // Available only on macOS. + const unsigned long NATIVE_MODIFIER_FUNCTION = 0x00100000; + // Available only on macOS. When pressing a key in numeric key pad, this + // must be included. + const unsigned long NATIVE_MODIFIER_NUMERIC_KEY_PAD = 0x01000000; + + /** + * See nsIWidget::SynthesizeNativeKeyEvent + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * When you use this for tests, use the constants defined in NativeKeyCodes.js + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a "keyevent" + * topic. + */ + void sendNativeKeyEvent(in long aNativeKeyboardLayout, + in long aNativeKeyCode, + in unsigned long aModifierFlags, + in AString aCharacters, + in AString aUnmodifiedCharacters, + [optional] in nsIObserver aObserver); + + /** + * See nsIWidget::SynthesizeNativeMouseEvent + * + * Will be called on the widget that contains aElement. + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * @param aScreenX X offset in the screen in device pixels. + * @param aScreenY Y offset in the screen in derive pixels. + * @param aNativeMessage One of NATIVE_MOUSE_MESSAGE_* + * @param aButton Same as `MouseEvent.button` value. + * @param aModifierFlags See nsIWidget's native modifier flags. + * @param aElementOnWidget An element which is on a widget. + * @param aObserver The synthesized native event will be fired + * asynchronously, and upon completion the observer, if + * provided, will be notified with a "mouseevent" topic. + */ + const unsigned long NATIVE_MOUSE_MESSAGE_BUTTON_DOWN = 0x00000001; + const unsigned long NATIVE_MOUSE_MESSAGE_BUTTON_UP = 0x00000002; + const unsigned long NATIVE_MOUSE_MESSAGE_MOVE = 0x00000003; + const unsigned long NATIVE_MOUSE_MESSAGE_ENTER_WINDOW = 0x00000004; + const unsigned long NATIVE_MOUSE_MESSAGE_LEAVE_WINDOW = 0x00000005; + void sendNativeMouseEvent(in long aScreenX, + in long aScreenY, + in unsigned long aNativeMessage, + in short aButton, + in unsigned long aModifierFlags, + in Element aElementOnWidget, + [optional] in nsIObserver aObserver); + + /** + * Suppress animations that are applied to a window by OS when + * resizing, moving, changing size mode, ... + */ + void suppressAnimation(in boolean aSuppress); + + /** + * The values for sendNativeMouseScrollEvent's aAdditionalFlags. + */ + + /** + * If MOUSESCROLL_PREFER_WIDGET_AT_POINT is set, widget will dispatch + * the event to a widget which is under the cursor. Otherwise, dispatch to + * a default target on the platform. E.g., on Windows, it's focused window. + */ + const unsigned long MOUSESCROLL_PREFER_WIDGET_AT_POINT = 0x00000001; + + /** + * Interpret the scroll delta values as lines rather than pixels. + */ + const unsigned long MOUSESCROLL_SCROLL_LINES = 0x00000002; + + /** + * The platform specific values of aAdditionalFlags. Must be over 0x00010000. + */ + + /** + * If MOUSESCROLL_WIN_SCROLL_LPARAM_NOT_NULL is set and aNativeMessage is + * WM_VSCROLL or WM_HSCROLL, widget will set the window handle to the lParam + * instead of NULL. + */ + const unsigned long MOUSESCROLL_WIN_SCROLL_LPARAM_NOT_NULL = 0x00010000; + + /** + * See nsIWidget::SynthesizeNativeMouseScrollEvent + * + * Will be called on the widget that contains aElement. + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a + * "mousescrollevent" topic. + * + * @param aNativeMessage + * On Windows: WM_MOUSEWHEEL (0x020A), WM_MOUSEHWHEEL(0x020E), + * WM_VSCROLL (0x0115) or WM_HSCROLL (0x114). + */ + void sendNativeMouseScrollEvent(in long aScreenX, + in long aScreenY, + in unsigned long aNativeMessage, + in double aDeltaX, + in double aDeltaY, + in double aDeltaZ, + in unsigned long aModifierFlags, + in unsigned long aAdditionalFlags, + in Element aElement, + [optional] in nsIObserver aObserver); + + /** + * Touch states for sendNativeTouchPoint. These values match + * nsIWidget's TouchPointerState. + */ + + // The pointer is in a hover state above the digitizer + const long TOUCH_HOVER = 0x01; + // The pointer is in contact with the digitizer + const long TOUCH_CONTACT = 0x02; + // The pointer has been removed from the digitizer detection area + const long TOUCH_REMOVE = 0x04; + // The pointer has been canceled. Will cancel any pending os level + // gestures that would be triggered as a result of completion of the + // input sequence. This may not cancel moz platform related events + // that might get tirggered by input already delivered. + const long TOUCH_CANCEL = 0x08; + + /** + * Phase states for sendNativeTouchPadPinch. + */ + const long PHASE_BEGIN = 0; + const long PHASE_UPDATE = 1; + const long PHASE_END = 2; + + /** + * Create a new or update an existing touch point on the digitizer. + * To trigger os level gestures, individual touch points should + * transition through a complete set of touch states which should be + * sent as individual calls. For example: + * tap - msg1:TOUCH_CONTACT, msg2:TOUCH_REMOVE + * drag - msg1-n:TOUCH_CONTACT (moving), msgn+1:TOUCH_REMOVE + * hover drag - msg1-n:TOUCH_HOVER (moving), msgn+1:TOUCH_REMOVE + * + * Widget support: Windows 8.0+, Winrt/Win32. Other widgets will throw. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a "touchpoint" + * topic. + * + * @param aPointerId The touch point id to create or update. + * @param aTouchState one or more of the touch states listed above + * @param aScreenX, aScreenY screen coords of this event + * @param aPressure 0.0 -> 1.0 float val indicating pressure + * @param aOrientation 0 -> 359 degree value indicating the + * orientation of the pointer. Use 90 for normal taps. + */ + void sendNativeTouchPoint(in unsigned long aPointerId, + in unsigned long aTouchState, + in long aScreenX, + in long aScreenY, + in double aPressure, + in unsigned long aOrientation, + [optional] in nsIObserver aObserver); + /** + * These values indicate touchpad pinch phase states : + * PHASE_BEGIN + * PHASE_UPDATE + * PHASE_END + * Widget support: Linux GTK 3.18+. + * @param aEventPhase The touchpad pinch phase using states listed above. + * @param aScale Events with PHASE_UPDATE will change the zoom level by + * the ratio between the scale of the current event and the scale of the last event. + * @param aScreenX, aScreenY screen coords of the focus point of this event. + * @param aModifierFlags is expected to contain native modifier values. + */ + void sendNativeTouchpadPinch(in unsigned long aEventPhase, + in float aScale, + in long aScreenX, + in long aScreenY, + in long aModifierFlags); + + /** + * Simulates native touch based taps on the input digitizer. Events + * triggered by this call are injected at the os level. Events do not + * bypass widget level input processing and as such can be used to + * test widget event logic and async pan-zoom controller functionality. + * Cannot be accessed from an unprivileged context. + * + * Long taps (based on the aLongTap parameter) will be completed + * asynchrnously after the call returns. Long tap delay is based on + * the ui.click_hold_context_menus.delay pref or 1500 msec if pref + * is not set. + * + * Widget support: Windows 8.0+, Winrt/Win32. Other widgets will + * throw. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified, with a "touchtap" + * topic. + * + * @param aScreenX, aScreenY screen coords of this event + * @param aLongTap true if the tap should be long, false for a short + * tap. + */ + void sendNativeTouchTap(in long aScreenX, + in long aScreenY, + in boolean aLongTap, + [optional] in nsIObserver aObserver); + + /** + * Create a new or update an existing pen input on the digitizer. + * + * Widget support: Windows 10 1809+. Other widgets will throw. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a "peninput" + * topic. + * + * @param aPointerId The touch point id to create or update. + * @param aPointerState one or more of the TOUCH_* listed above + * @param aScreenX x screen coord of this event + * @param aScreenY y screen coord of this event + * @param aPressure 0.0 -> 1.0 float val indicating pressure + * @param aRotation 0 -> 359 degree value indicating the rotation of the + * pointer. Use 0 for normal taps. + * @param aTiltX -90 -> 90 degree value indicating the tilt along the x-axis + * of the pointer. Use 0 for normal taps. + * @param aTiltY -90 -> 90 degree value indicating the tilt along the y-axis + * of the pointer. Use 0 for normal taps. + * @param aButton Same as MouseEvent::button. + */ + void sendNativePenInput(in unsigned long aPointerId, + in unsigned long aPointerState, + in long aScreenX, + in long aScreenY, + in double aPressure, + in unsigned long aRotation, + in long aTiltX, + in long aTiltY, + in long aButton, + [optional] in nsIObserver aObserver); + + /** + * Cancel any existing touch points or long tap delays. Calling this is safe + * even if you're sure there aren't any pointers recorded. You should call + * this when tests shut down to reset the digitizer driver. Not doing so can + * leave the digitizer in an undetermined state which can screw up subsequent + * tests and native input. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a "cleartouch" + * topic. + */ + void clearNativeTouchSequence([optional] in nsIObserver aObserver); + + /** + * Send a native event as if the user double tapped the touchpad with two + * fingers. + * + * Widget support: macOS. + * @param aScreenX, aScreenY screen coords of the focus point of this event. + * @param aModifierFlags is expected to contain native modifier values. + */ + void sendNativeTouchpadDoubleTap(in long aScreenX, + in long aScreenY, + in long aModifierFlags); + + /** + * Send a native event as if the user panned on the touchpad with two + * fingers. + * + * NOTE: The synthesized native event will be fired asynchronously, and upon + * completion the observer, if provided, will be notified with a + * "touchpadpanevent" topic. + * + * Widget support: Windows. + * @param aScreenX, aScreenY screen coords of the focus point of this event. + * @param aDeltaX, aDeltaY the amount of delta in the pan. + * @param aModifierFlags is expected to contain native modifier values. + */ + void sendNativeTouchpadPan(in unsigned long aEventPhase, + in long aScreenX, + in long aScreenY, + in double aDeltaX, + in double aDeltaY, + in long aModifierFlags, + [optional] in nsIObserver aObserver); + + /** + * Clears the SharedStyleSheetCache. + */ + void clearSharedStyleSheetCache(); + + /** + * Returns the number of stylesheets that have been parsed on this document. + * Useful to test caching. + */ + readonly attribute unsigned long parsedStyleSheets; + + /** + * See nsIWidget::ActivateNativeMenuItemAt + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + */ + void activateNativeMenuItemAt(in AString indexString); + + /** + * See nsIWidget::ForceUpdateNativeMenuAt + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + */ + void forceUpdateNativeMenuAt(in AString indexString); + + /** + * Returns the current selection as plaintext. Note that the result may be + * different from the result of sendQueryContentEvent(QUERY_SELECTED_TEXT). + * This result is computed by native API with transferable data. In other + * words, when the OS treats the selection as plaintext, it treats current + * selection as this result. + */ + AString GetSelectionAsPlaintext(); + + /** + * Force a garbage collection followed by a cycle collection. + * + * Will throw a DOM security error if called without chrome privileges in + * non-debug builds. Available to all callers in debug builds. + * + * @param aListener listener that receives information about the CC graph + */ + void garbageCollect([optional] in nsICycleCollectorListener aListener); + + /** + * Force a cycle collection without garbage collection. + * + * Will throw a DOM security error if called without chrome privileges in + * non-debug builds. Available to all callers in debug builds. + * + * @param aListener listener that receives information about the CC graph + */ + void cycleCollect([optional] in nsICycleCollectorListener aListener); + + /** + * Trigger whichever GC or CC timer is currently active and waiting to fire. + * Don't do this too much for initiating heavy actions, like the start of a IGC. + * + * @param aReason the reason for the GC, from js/public/GCAPI.h. Defaults to + * DOM_WINDOW_UTILS. + */ + void runNextCollectorTimer([optional] in ACString aReason); + + /** + * "Poke" the GC: set a timer to run a GC soon (usually 4 seconds), unless + * another GC timer has already been set. This is used for testing. + * + * @param aReason the reason for the GC, from js/public/GCAPI.h. Defaults to + * DOM_WINDOW_UTILS. + */ + void pokeGC([optional] in ACString aReason); + + /** Synthesize a simple gesture event for a window. The event types + * supported are: MozSwipeGestureMayStart, MozSwipeGestureStart, + * MozSwipeGestureUpdate, MozSwipeGestureEnd, MozSwipeGesture, + * MozMagnifyGestureStart, MozMagnifyGestureUpdate, MozMagnifyGesture, + * MozRotateGestureStart, MozRotateGestureUpdate, MozRotateGesture, + * MozPressTapGesture, MozTapGesture, and MozEdgeUIGesture. + * + * Cannot be accessed from unprivileged context (not + * content-accessible) Will throw a DOM security error if called + * without chrome privileges. + * + * @param aType event type + * @param aX x offset in CSS pixels + * @param aY y offset in CSS pixels + * @param aDirection direction, using constants defined in SimpleGestureEvent.webidl + * @param aDelta amount of magnification or rotation for magnify and rotation events + * @param aModifiers modifiers pressed, using constants defined in Event.webidl + * @param aClickCount For tap gestures, the number of taps. + */ + void sendSimpleGestureEvent(in AString aType, + in float aX, + in float aY, + in unsigned long aDirection, + in double aDelta, + in long aModifiers, + [optional] in unsigned long aClickCount); + + /** + * Retrieve the element at point aX, aY in the window's document. + * + * @param aIgnoreRootScrollFrame whether or not to ignore the root scroll + * frame when retrieving the element. If false, this method returns + * null for coordinates outside of the viewport. + * @param aFlushLayout flushes layout if true. Otherwise, no flush occurs. + */ + Element elementFromPoint(in float aX, + in float aY, + in boolean aIgnoreRootScrollFrame, + in boolean aFlushLayout); + + /** + * Retrieve all nodes that intersect a rect in the window's document. + * + * @param aX x reference for the rectangle in CSS pixels + * @param aY y reference for the rectangle in CSS pixels + * @param aTopSize How much to expand up the rectangle + * @param aRightSize How much to expand right the rectangle + * @param aBottomSize How much to expand down the rectangle + * @param aLeftSize How much to expand left the rectangle + * @param aIgnoreRootScrollFrame whether or not to ignore the root scroll + * frame when retrieving the element. If false, this method returns + * null for coordinates outside of the viewport. + * @param aFlushLayout flushes layout if true. Otherwise, no flush occurs. + * @param aOnlyVisible Set to true if you only want nodes that pass a visibility + * hit test. + * @param aTransparencyThreshold Only has an effect if aOnlyVisible is true. + * Returns what amount of transparency is considered "opaque enough" + * to consider elements "not visible". The default is effectively "1" + * (so, only opaque elements will stop an element from being + * "visible"). + */ + NodeList nodesFromRect(in float aX, + in float aY, + in float aTopSize, + in float aRightSize, + in float aBottomSize, + in float aLeftSize, + in boolean aIgnoreRootScrollFrame, + in boolean aFlushLayout, + in boolean aOnlyVisible, + [optional] in float aTransparencyThreshold); + + + /** + * Get a list of nodes that have meaningful textual content to + * be translated. The implementation of this algorithm is in flux + * as we experiment and refine which approach works best. + * + * This method requires chrome privileges. + */ + nsITranslationNodeList getTranslationNodes(in Node aRoot); + + /** + * Compare the two canvases, returning the number of differing pixels and + * the maximum difference in a channel. This will throw an error if + * the dimensions of the two canvases are different. + * + * This method requires chrome privileges. + */ + uint32_t compareCanvases(in nsISupports aCanvas1, + in nsISupports aCanvas2, + out unsigned long aMaxDifference); + + /** + * Returns true if a MozAfterPaint event has been queued but not yet + * fired. + */ + readonly attribute boolean isMozAfterPaintPending; + + /** + * Returns true if the InputTaskManager is suspended. + */ + readonly attribute boolean isInputTaskManagerSuspended; + + /** + * Suppresses/unsuppresses user initiated event handling in window's document + * and subdocuments. + * + * @throw NS_ERROR_DOM_SECURITY_ERR if called without chrome privileges and + * NS_ERROR_FAILURE if window doesn't have a document. + */ + void suppressEventHandling(in boolean aSuppress); + + /** + * Disable or enable non synthetic test mouse events on *all* windows. + * + * Cannot be accessed from unprivileged context (not content-accessible). + * Will throw a DOM security error if called without chrome privileges. + * + * @param aDisable If true, disable all non synthetic test mouse events + * on all windows. Otherwise, enable them. + */ + void disableNonTestMouseEvents(in boolean aDisable); + + /** + * Returns the scroll position of the window's currently loaded document. + * + * @param aFlushLayout flushes layout if true. Otherwise, no flush occurs. + * @see nsIDOMWindow::scrollX/Y + */ + void getScrollXY(in boolean aFlushLayout, out long aScrollX, out long aScrollY); + + /** + * Returns the scroll position of the window's currently loaded document. + * + * @param aFlushLayout flushes layout if true. Otherwise, no flush occurs. + * @see nsIDOMWindow::scrollX/Y + */ + void getScrollXYFloat(in boolean aFlushLayout, out float aScrollX, out float aScrollY); + + /** + * Returns the scrollbar width of the window's scroll frame. + * + * @param aFlushLayout flushes layout if true. Otherwise, no flush occurs. + */ + void getScrollbarSize(in boolean aFlushLayout, out long aWidth, out long aHeight); + + /** + * Returns the given element's bounds without flushing pending layout changes. + */ + DOMRect getBoundsWithoutFlushing(in Element aElement); + + /** + * Scroll the visual viewport to the given coordinates, relative to the + * document origin. + * Only applicable to the window associated with the root content document. + * Note: this does not take effect right away. Rather, the visual scroll + * request is sent to APZ with the next transaction, and will be + * reflected in the main thread with the subsequent APZ repaint request. + * Please see the caveats mentioned at PresShell::ScrollToVisual(), and + * request APZ review if adding a new call to this. + */ + const long UPDATE_TYPE_RESTORE = 0; + const long UPDATE_TYPE_MAIN_THREAD = 1; + const long SCROLL_MODE_INSTANT = 0; + const long SCROLL_MODE_SMOOTH = 1; + void scrollToVisual(in float aOffsetX, in float aOffsetY, + in long aUpdateType, in long aScrollMode); + + /** + * Returns the offset of the window's visual viewport relative to the + * layout viewport. + */ + void getVisualViewportOffsetRelativeToLayoutViewport(out float aOffsetX, + out float aOffsetY); + + /** + * Returns the scroll position of the window's visual viewport. + */ + void getVisualViewportOffset(out long aOffsetX, out long aOffsetY); + + /** + * Transforms the passed in rect from layout relative coords (relative to + * this document) to be is visual coords. + */ + DOMRect transformRectLayoutToVisual(in float aX, in float aY, + in float aWidth, in float aHeight); + + /** + * Transform a rectangle given in coordinates relative to this document + * into CSS coordinates relative to the screen. + */ + DOMRect toScreenRectInCSSUnits(in float aX, in float aY, + in float aWidth, in float aHeight); + + /** + * Transform a rectangle given in coordinates relative to this document + * to the screen. + */ + DOMRect toScreenRect(in float aX, in float aY, + in float aWidth, in float aHeight); + + /** + * Transform a rectangle given in coordinates relative to the top level + * parent process widget to the local widget. This window should be in a + * child process. + */ + DOMRect convertFromParentProcessWidgetToLocal(in float aX, + in float aY, + in float aWidth, + in float aHeight); + + /** + * Sets the maximum height of the dynamic toolbar in Screen pixel units. + */ + [can_run_script] + void setDynamicToolbarMaxHeight(in uint32_t aHeightInScreen); + + const long FLUSH_NONE = -1; + const long FLUSH_STYLE = 0; + const long FLUSH_LAYOUT = 1; + const long FLUSH_DISPLAY = 2; + + /** + * Returns true if a flush of the given type is needed. + */ + bool needsFlush(in long aFlushtype); + + /** + * Flush pending layout-type notification without flushing throttled + * animations. + */ + void flushLayoutWithoutThrottledAnimations(); + + /** + * Returns the bounds of the window's currently loaded document. This will + * generally be (0, 0, pageWidth, pageHeight) but in some cases (e.g. RTL + * documents) may have a negative left value. + */ + DOMRect getRootBounds(); + + /** + * Get IME open state. TRUE means 'Open', otherwise, 'Close'. + * This property works only when IMEEnabled is IME_STATUS_ENABLED. + */ + readonly attribute boolean IMEIsOpen; + + /** + * WARNING: These values must be same as nsIWidget's values. + */ + + /** + * DISABLED means users cannot use IME completely. + * Note that this state is *not* same as |ime-mode: disabled;|. + */ + const unsigned long IME_STATUS_DISABLED = 0; + + /** + * ENABLED means users can use all functions of IME. This state is same as + * |ime-mode: normal;|. + */ + const unsigned long IME_STATUS_ENABLED = 1; + + /** + * PASSWORD means users cannot use most functions of IME. But on GTK2, + * users can use "Simple IM" which only supports dead key inputting. + * The behavior is same as the behavior of the native password field. + * This state is same as |ime-mode: disabled;|. + */ + const unsigned long IME_STATUS_PASSWORD = 2; + + /** + * Get IME status, see above IME_STATUS_* definitions. + */ + readonly attribute unsigned long IMEStatus; + + /** + * Get the document URI which may be retrieved by native IME. + */ + readonly attribute nsIURI inputContextURI; + + /** + * Get whether current input context (including IME status) in the widget + * is set by content or not. + */ + const unsigned long INPUT_CONTEXT_ORIGIN_MAIN = 0; + const unsigned long INPUT_CONTEXT_ORIGIN_CONTENT = 1; + readonly attribute unsigned long inputContextOrigin; + + /** + * Get a root node which is observed by IMEContentObserver. + */ + readonly attribute Node nodeObservedByIMEContentObserver; + + /** + * Dispatches aEvent as a synthesized trusted event for tests via the + * PresShell object of the window's document. + * The event is dispatched to aTarget, which should be an object + * which implements nsIContent interface (#element, #text, etc). + * + * Cannot be accessed from unprivileged context (not + * content-accessible) Will throw a DOM security error if called + * without chrome privileges. + * + * @note Event handlers won't get aEvent as parameter, but a similar event. + * Also, aEvent should not be reused. + */ + [can_run_script] + boolean dispatchDOMEventViaPresShellForTesting(in Node aTarget, + in Event aEvent); + + /** + * Sets WidgetEvent::mFlags::mOnlyChromeDispatch to true to ensure that + * the event is propagated only to chrome. + * Event's .target property will be aTarget. + * Returns the same value as what EventTarget.dispatchEvent does. + */ + boolean dispatchEventToChromeOnly(in EventTarget aTarget, + in Event aEvent); + + /** + * Returns the real classname (possibly of the mostly-transparent security + * wrapper) of aObj. + */ + [implicit_jscontext] string getClassName(in jsval aObject); + + /** + * Generate a content command event. + * + * Cannot be accessed from unprivileged context (not content-accessible) + * Will throw a DOM security error if called without chrome privileges. + * + * @param aType Type of command content event to send. Can be one of "cut", + * "copy", "paste", "delete", "undo", "redo", "insertText" or + * "pasteTransferable". + * @param aTransferable an instance of nsITransferable when aType is + * "pasteTransferable" + * @param aString The string to be inserted into focused editor when aType is + * "insertText" + */ + void sendContentCommandEvent(in AString aType, + [optional] in nsITransferable aTransferable, + [optional] in AString aString); + + /** + * If sendQueryContentEvent()'s aAdditionalFlags argument is + * QUERY_CONTENT_FLAG_USE_XP_LINE_BREAK, plain text generated from content + * is created with "\n". + * Otherwise, platform dependent. E.g., on Windows, "\r\n" is used. + * aOffset and aLength are offset and length in/of the plain text content. + * This flag also affects the result values such as offset, length and string. + */ + const unsigned long QUERY_CONTENT_FLAG_USE_NATIVE_LINE_BREAK = 0x0000; + const unsigned long QUERY_CONTENT_FLAG_USE_XP_LINE_BREAK = 0x0001; + + /** + * sendQueryContentEvent()'s aAdditionalFlags may have one of following + * flags when aType is QUERY_SELECTED_TEXT. If one of them is set, + * the result is the first range of the selection type. See also + * nsISelectionController::SELECTION_*. + */ + const unsigned long QUERY_CONTENT_FLAG_SELECTION_SPELLCHECK = 0x0002; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_IME_RAWINPUT = 0x0004; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_IME_SELECTEDRAWTEXT = 0x0008; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_IME_CONVERTEDTEXT = 0x0010; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_IME_SELECTEDCONVERTEDTEXT = + 0x0020; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_ACCESSIBILITY = 0x0040; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_FIND = 0x0080; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_URLSECONDARY = 0x0100; + const unsigned long QUERY_CONTENT_FLAG_SELECTION_URLSTRIKEOUT = 0x0200; + + /** + * One of sendQueryContentEvent()'s aAdditionalFlags. If this is specified, + * aOffset is relative to start of selection or composition. + * Note that this is supported only when QUERY_CONTENT_FLAG_USE_XP_LINE_BREAK + * is not specified for now. + */ + const unsigned long QUERY_CONTENT_FLAG_OFFSET_RELATIVE_TO_INSERTION_POINT = + 0x0400; + + /** + * Synthesize a query content event. Note that the result value returned here + * is in LayoutDevice pixels rather than CSS pixels. + * + * @param aType One of the following const values. And see also each comment + * for the other parameters and the result. + * @param aAdditionalFlags See the description of QUERY_CONTENT_FLAG_*. + */ + nsIQueryContentEventResult sendQueryContentEvent( + in unsigned long aType, + in long long aOffset, + in unsigned long aLength, + in long aX, + in long aY, + [optional] in unsigned long aAdditionalFlags); + + /** + * QUERY_SELECTED_TEXT queries the first selection range's information. + * + * @param aOffset Not used. + * @param aLength Not used. + * @param aX Not used. + * @param aY Not used. + * + * @return offset, reversed and text properties of the result are available. + */ + const unsigned long QUERY_SELECTED_TEXT = 3200; + + /** + * QUERY_TEXT_CONTENT queries the text at the specified range. + * + * @param aOffset The first character's offset. 0 is the first character. + * @param aLength The length of getting text. If the aLength is too long, + * the result text is shorter than this value. + * @param aX Not used. + * @param aY Not used. + * + * @return text property of the result is available. + */ + const unsigned long QUERY_TEXT_CONTENT = 3201; + + /** + * QUERY_CARET_RECT queries the (collapsed) caret rect of the offset. + * If the actual caret is there at the specified offset, this returns the + * actual caret rect. Otherwise, this guesses the caret rect from the + * metrics of the text. + * + * @param aOffset The caret offset. 0 is the left side of the first + * caracter in LTR text. + * @param aLength Not used. + * @param aX Not used. + * @param aY Not used. + * + * @return left, top, width and height properties of the result are available. + * The left and the top properties are offset in the client area of + * the DOM window. + */ + const unsigned long QUERY_CARET_RECT = 3203; + + /** + * QUERY_TEXT_RECT queries the specified text's rect. + * + * @param aOffset The first character's offset. 0 is the first character. + * @param aLength The length of getting text. If the aLength is too long, + * the extra length is ignored. + * @param aX Not used. + * @param aY Not used. + * + * @return left, top, width and height properties of the result are available. + * The left and the top properties are offset in the client area of + * the DOM window. + */ + const unsigned long QUERY_TEXT_RECT = 3204; + + /** + * QUERY_TEXT_RECT queries the focused editor's rect. + * + * @param aOffset Not used. + * @param aLength Not used. + * @param aX Not used. + * @param aY Not used. + * + * @return left, top, width and height properties of the result are available. + */ + const unsigned long QUERY_EDITOR_RECT = 3205; + + /** + * QUERY_CHARACTER_AT_POINT queries the character information at the + * specified point. The point is offset in the window. + * NOTE: If there are some panels at the point, this method send the query + * event to the panel's widget automatically. + * + * @param aOffset Not used. + * @param aLength Not used. + * @param aX X offset in the widget. + * @param aY Y offset in the widget. + * + * @return offset, notFound, left, top, width and height properties of the + * result are available. + */ + const unsigned long QUERY_CHARACTER_AT_POINT = 3208; + + /** + * QUERY_TEXT_RECT_ARRAY queries the rects per character + * + * @param aOffset The first character's offset. 0 is the first character. + * @param aLength The length of getting text. If the aLength is too long, + * the extra length is ignored. + * @param aX Not used. + * @param aY Not used. + */ + const unsigned long QUERY_TEXT_RECT_ARRAY = 3209; + + /** + * Called when the remote child frame has changed its fullscreen state, + * when entering fullscreen, and when the origin which is fullscreen changes. + * aFrameElement is the iframe element which contains the child-process + * fullscreen document. + */ + void remoteFrameFullscreenChanged(in Element aFrameElement); + + /** + * Called when the remote frame has popped all fullscreen elements off its + * stack, so that the operation can complete on the parent side. + */ + void remoteFrameFullscreenReverted(); + + /** + * Calls the document to handle any pending fullscreen requests. + * It is called when the parent document has entered fullscreen, and + * we want to put the current document into fullscreen as well. + * The return value indicates whether there is any fullscreen request + * handled by this call. + */ + boolean handleFullscreenRequests(); + + /** + * Called when the child frame has fully exit fullscreen, so that the parent + * process can also fully exit. + * + * @param aDontResoreViewSize false if content view size is restored by + * original view size that is on entering full + * screen. + */ + void exitFullscreen([optional] in boolean aDontRestoreViewSize); + + /** + * If sendQueryContentEvent()'s aAdditionalFlags argument is + * SELECTION_SET_FLAG_USE_NATIVE_LINE_BREAK, aOffset and aLength are offset + * and length in/of plain text generated from content is created with "\n". + * Otherwise, platform dependent. E.g., on Windows, "\r\n" is used. + */ + const unsigned long SELECTION_SET_FLAG_USE_NATIVE_LINE_BREAK = 0x0000; + const unsigned long SELECTION_SET_FLAG_USE_XP_LINE_BREAK = 0x0001; + + /** + * If SELECTION_SET_FLAG_REVERSE is set, the selection is set from + * |aOffset + aLength| to |aOffset|. Otherwise, it's set from |aOffset| to + * |aOffset + aLength|. + */ + const unsigned long SELECTION_SET_FLAG_REVERSE = 0x0002; + + /** + * Synthesize a selection set event to the window. + * + * This sets the selection as the specified information. + * Note that for avoiding unnecessary update from user and web app point of + * view, it compares aOffset and aLength with selection cache which is same + * as what is notified with NOTIFY_IME_OF_SELECTION_CHANGE. Therefore, if + * the notification is still queued, this works different from user's + * scenario. Therefore, before calling this, the caller should wait at least + * 2 animation frames if `Selection` was changed before. + * + * @param aOffset The caret offset of the selection start. + * @param aLength The length of the selection. If this is too long, the + * extra length is ignored. + * @param aAdditionalFlags See the description of SELECTION_SET_FLAG_*. + * @return True, if succeeded. Otherwise, false. + */ + boolean sendSelectionSetEvent(in unsigned long aOffset, + in unsigned long aLength, + [optional] in unsigned long aAdditionalFlags); + + /* Selection behaviors - mirror nsIFrame's nsSelectionAmount constants */ + const unsigned long SELECT_CHARACTER = 0; + const unsigned long SELECT_CLUSTER = 1; + const unsigned long SELECT_WORD = 2; + const unsigned long SELECT_LINE = 3; + const unsigned long SELECT_BEGINLINE = 4; + const unsigned long SELECT_ENDLINE = 5; + const unsigned long SELECT_PARAGRAPH = 6; + const unsigned long SELECT_WORDNOSPACE = 7; + + /** + * Select content at a client point based on a selection behavior if the + * underlying content is selectable. Selection will accumulate with any + * existing selection, callers should clear selection prior if needed. + * May fire selection changed events. Calls nsFrame's SelectByTypeAtPoint. + * + * @param aX, aY The selection point in client coordinates. + * @param aSelectType The selection behavior requested. + * @return True if a selection occured, false otherwise. + * @throw NS_ERROR_DOM_SECURITY_ERR, NS_ERROR_UNEXPECTED for utils + * issues, and NS_ERROR_INVALID_ARG for coordinates that are outside + * this window. + */ + [can_run_script] + boolean selectAtPoint(in float aX, + in float aY, + in unsigned long aSelectBehavior); + + /** + * Perform the equivalent of: + * window.getComputedStyle(aElement, aPseudoElement). + * getPropertyValue(aPropertyName) + * except that, when the link whose presence in history is allowed to + * influence aElement's style is visited, get the value the property + * would have if allowed all properties to change as a result of + * :visited selectors (except for cases where getComputedStyle uses + * data from the frame). + * + * This is easier to implement than adding our property restrictions + * to this API, and is sufficient for the present testing + * requirements (which are essentially testing 'color'). + */ + AString getVisitedDependentComputedStyle(in Element aElement, + in AString aPseudoElement, + in AString aPropertyName); + + /** + * Put the window into a state where scripts are frozen and events + * suppressed, for use when the window has launched a modal prompt. + */ + void enterModalState(); + + /** + * Resume normal window state, where scripts can run and events are + * delivered. + */ + void leaveModalState(); + + /** + * Is the window is in a modal state? [See enterModalState()] + */ + boolean isInModalState(); + + /** + * Suspend/resume timeouts on this window and its descendant windows. + */ + void suspendTimeouts(); + void resumeTimeouts(); + + /** + * What type of layer manager the widget associated with this window is + * using. "Basic" is unaccelerated; other types are accelerated. Throws an + * error if there is no widget associated with this window. + */ + readonly attribute AString layerManagerType; + + /** + * True if the layer manager for the widget associated with this window is + * forwarding layers to a remote compositor, false otherwise. Throws an + * error if there is no widget associated with this window. + */ + readonly attribute boolean layerManagerRemote; + + /** + * True if webrender was requested by the user (via pref or env-var), false + * otherwise. Note that this doesn't represent whether or not webrender is + * *actually* enabled, just whether or not it was requested. + */ + readonly attribute boolean isWebRenderRequested; + + /** + * Returns the current audio backend as a free-form string. + */ + readonly attribute AString currentAudioBackend; + + /** + * Returns the max channel counts of the current audio device. + */ + readonly attribute unsigned long currentMaxAudioChannels; + + /** + * Returns the mean round trip latency in seconds for the default input and + * output device, and the stddev of this latency, as a two element array when + * the Promise succeeds. + */ + Promise defaultDevicesRoundTripLatency(); + + /** + * Returns the preferred sample rate of the current audio device. + */ + readonly attribute unsigned long currentPreferredSampleRate; + + /** + * Returns all the audio input/output devices. + */ + const unsigned short AUDIO_INPUT = 0; + const unsigned short AUDIO_OUTPUT = 1; + nsIArray audioDevices(in unsigned short aSide); + + /** + * Record (and return) frame-intervals for frames which were presented + * between calling StartFrameTimeRecording and StopFrameTimeRecording. + * + * - Uses a cyclic buffer and serves concurrent consumers, so if Stop is called too late + * (elements were overwritten since Start), result is considered invalid and hence empty. + * - Buffer is capable of holding 10 seconds @ 60fps (or more if frames were less frequent). + * Can be changed (up to 1 hour) via pref: toolkit.framesRecording.bufferSize. + * - Note: the first frame-interval may be longer than expected because last frame + * might have been presented some time before calling StartFrameTimeRecording. + */ + + /** + * Returns a handle which represents current recording start position. + */ + void startFrameTimeRecording([retval] out unsigned long startIndex); + + /** + * Returns array of frame intervals since the time when the given startIndex + * was handed out from startFrameTimeRecording. + */ + Array<float> stopFrameTimeRecording(in unsigned long startIndex); + + /** + * The DPI of the display + */ + readonly attribute float displayDPI; + + /** + * advanceTimeAndRefresh allows the caller to take over the refresh + * driver timing for a window. A call to advanceTimeAndRefresh does + * three things: + * (1) It marks the refresh driver for this presentation so that it + * no longer refreshes on its own, but is instead driven entirely + * by the caller (except for the refresh that happens when a + * document comes out of the bfcache). + * (2) It advances the refresh driver's current refresh time by the + * argument given. Negative advances are permitted. + * (3) It does a refresh (i.e., notifies refresh observers) at that + * new time. + * + * Note that this affects other connected docshells of the same type + * in the same docshell tree, such as parent frames. + * + * When callers have completed their use of advanceTimeAndRefresh, + * they must call restoreNormalRefresh. + */ + void advanceTimeAndRefresh(in long long aMilliseconds); + + /** + * Undoes the effects of advanceTimeAndRefresh. + */ + void restoreNormalRefresh(); + + /** + * Reports whether the current state is test-controlled refreshes + * (see advanceTimeAndRefresh and restoreNormalRefresh above). + */ + readonly attribute bool isTestControllingRefreshes; + + /** + * Reports whether APZ is enabled on the widget that this window is attached + * to. If there is no widget it will report the default platform value of + * whether or not APZ is enabled. + */ + readonly attribute bool asyncPanZoomEnabled; + + /** + * Set async scroll offset on an element. The next composite will render + * with that offset if async scrolling is enabled, and then the offset + * will be removed. Only call this while test-controlled refreshes is enabled. + */ + void setAsyncScrollOffset(in Element aElement, in float aX, in float aY); + + /** + * Set async zoom value. aRootElement should be the document element of our + * document. The next composite will render with that zoom added to any + * existing zoom if async scrolling is enabled, and then the zoom will be + * removed. Only call this while test-controlled refreshes is enabled. + */ + void setAsyncZoom(in Element aRootElement, in float aValue); + + /** + * Do a round-trip to the compositor to ensure any pending APZ repaint requests + * get flushed to the main thread. If the function returns true, the flush was + * triggered and an "apz-repaints-flushed" notification will be dispatched via + * the observer service once the flush is complete. If the function returns + * false, an error occurred or a flush is not needed, and the notification + * will not fire. This is intended to be used by test code only! + */ + bool flushApzRepaints(); + + /** + * Sets a flag on the element to forcibly disable APZ on it. This affects + * the result of nsLayoutUtils::ShouldDisableApzForElement when called on + * this element. This function also schedules a repaint to ensure that the + * change takes effect. Note that this is not reversible; it is intended for + * use by test code only. + */ + void disableApzForElement(in Element aElement); + + /** + * Ask APZ to pan and zoom to the focused input element. + */ + [can_run_script] void zoomToFocusedInput(); + + /** + * Method for testing StyleAnimationValue::ComputeDistance. + * + * Returns the distance between the two values as reported by + * StyleAnimationValue::ComputeDistance for the given element and + * property. + */ + double computeAnimationDistance(in Element element, + in AString property, + in AString value1, + in AString value2); + + /** + * Returns the computed style for the specified property of given pseudo type + * on the given element after removing styles from declarative animations. + * @param aElement - A target element + * @param aPseudoElement - A pseudo type (e.g. '::before' or null) + * @param aProperty - A longhand CSS property (e.g. 'background-color') + * @param aFlushType - FLUSH_NONE if any pending styles should not happen, + * FLUSH_STYLE to flush pending styles. + */ + AString getUnanimatedComputedStyle(in Element aElement, + in AString aPseudoElement, + in AString aProperty, + in long aFlushType); + + /** + * Returns the effective canvas background color for the window. + */ + readonly attribute AString canvasBackgroundColor; + + /** + * Get the type of the currently focused html input, if any. + */ + readonly attribute AString focusedInputType; + + /** + * Get the action hint of the currently focused html input, if any. + */ + readonly attribute AString focusedActionHint; + + /** + * Get the inputmode of the currently focused editing host, if any. + */ + readonly attribute AString focusedInputMode; + + /** + * Get the autocapitalize of the currently focused editing host, if any. + */ + readonly attribute AString focusedAutocapitalize; + + /** + * Find the view ID for a given element. This is the reverse of + * findElementWithViewId(). + */ + nsViewID getViewId(in Element aElement); + + /** + * Check if any PaintedLayer painting has been done for this element, + * clears the painted flags if they have. + */ + boolean checkAndClearPaintedState(in Element aElement); + + /** + * Check if any display list building has been done for this element, + * clears the display list flags if they have. + */ + boolean checkAndClearDisplayListState(in Element aElement); + + /** + * Check whether all display items of the primary frame of aElement have been + * assigned to the same single PaintedLayer in the last paint. If that is the + * case, returns whether that PaintedLayer is opaque; if it's not the case, an + * exception is thrown. + */ + boolean isPartOfOpaqueLayer(in Element aElement); + + /** + * Count the number of different PaintedLayers that the supplied elements have + * been assigned to in the last paint. Throws an exception if any of the + * elements doesn't have a primary frame, or if that frame's display items are + * assigned to any other layers than just a single PaintedLayer per element. + */ + unsigned long numberOfAssignedPaintedLayers(in Array<Element> aElements); + + /** + * Get internal id of the stored blob, file or file handle. + */ + [implicit_jscontext] long long getFileId(in jsval aFile); + + /** + * Get internal file path of the stored file or file handle. + * + * TODO: File handle objects are actually not supported at the moment. + */ + [implicit_jscontext] AString getFilePath(in jsval aFile); + + /** + * Get file ref count info for given database and file id. + */ + boolean getFileReferences(in AString aDatabaseName, in long long aId, + [optional] out long aRefCnt, + [optional] out long aDBRefCnt); + + void flushPendingFileDeletions(); + + /** + * Begin opcode-level profiling of all JavaScript execution in the window's + * runtime. + */ + [implicit_jscontext] + void startPCCountProfiling(); + + /** + * Stop opcode-level profiling of JavaScript execution in the runtime, and + * collect all counts for use by getPCCount methods. + */ + [implicit_jscontext] + void stopPCCountProfiling(); + + /** + * Purge collected PC counters. + */ + [implicit_jscontext] + void purgePCCounts(); + + /** + * Get the number of scripts with opcode-level profiling information. + */ + [implicit_jscontext] + long getPCCountScriptCount(); + + /** + * Get a JSON string for a short summary of a script and the PC counts + * accumulated for it. + */ + [implicit_jscontext] + AString getPCCountScriptSummary(in long script); + + /** + * Get a JSON string with full information about a profiled script, + * including the decompilation of the script and placement of decompiled + * operations within it, and PC counts for each operation. + */ + [implicit_jscontext] + AString getPCCountScriptContents(in long script); + + /** + * Returns true if painting is suppressed for this window and false + * otherwise. + */ + readonly attribute boolean paintingSuppressed; + + /** + * Set the viewport size for the purposes of clamping scroll positions for + * the root scroll frame of this document to be (aWidth,aHeight) in CSS pixels. + * + * The caller of this method must have chrome privileges. + */ + void setVisualViewportSize(in float aWidth, in float aHeight); + + /** + * These are used to control whether dialogs (alert, prompt, confirm) are + * allowed, and to reset the inernal state that controls whether dialogs + * are currently blocked or not. + */ + void disableDialogs(); + void enableDialogs(); + bool areDialogsEnabled(); + void resetDialogAbuseState(); + + const unsigned long AGENT_SHEET = 0; + const unsigned long USER_SHEET = 1; + const unsigned long AUTHOR_SHEET = 2; + /** + * Synchronously loads a style sheet from |sheetURI| and adds it to the list + * of additional style sheets of the document. + * + * These additional style sheets are very much like user/agent sheets loaded + * with loadAndRegisterSheet. The only difference is that they are applied only + * on the document owned by this window. + * + * Sheets added via this API take effect immediately on the document. + */ + void loadSheet(in nsIURI sheetURI, in unsigned long type); + + /** + * Same as the above method but allows passing the URI as a string. + */ + void loadSheetUsingURIString(in ACString sheetURI, in unsigned long type); + + /** + * Adds a style sheet to the list of additional style sheets of the document. + * + * Style sheets can be preloaded with nsIStyleSheetService.preloadSheet. + * + * Sheets added via this API take effect immediately on the document. + */ + void addSheet(in nsIPreloadedStyleSheet sheet, in unsigned long type); + + /** + * Remove the document style sheet at |sheetURI| from the list of additional + * style sheets of the document. The removal takes effect immediately. + */ + void removeSheet(in nsIURI sheetURI, in unsigned long type); + + /** + * Same as the above method but allows passing the URI as a string. + */ + void removeSheetUsingURIString(in ACString sheetURI, in unsigned long type); + + /** + * Returns true if a user input is being handled. + * + * This calls EventStateManager::IsHandlingUserInput(). + */ + readonly attribute boolean isHandlingUserInput; + + /** + * Returns milliseconds elapsed since last user input was started. + * Returns -1 if there wasn't any previous user input. + * + * This relies on EventStateManager::LatestUserInputStart() + */ + readonly attribute double millisSinceLastUserInput; + + /** + * After calling the method, the window for which this DOMWindowUtils + * was created can be closed using scripts. + */ + void allowScriptsToClose(); + + /** + * Is the parent window's main widget visible? If it isn't, we probably + * don't want to display any dialogs etc it may request. This corresponds + * to the visibility check in nsWindowWatcher::OpenWindowInternal(). + * + * Will throw a DOM security error if called without chrome privileges or + * NS_ERROR_NOT_AVAILABLE in the unlikely event that the parent window's + * main widget can't be reached. + */ + readonly attribute boolean isParentWindowMainWidgetVisible; + + /** + * In certain cases the event handling of nodes, form controls in practice, + * may be disabled. Such cases are for example the existence of disabled + * attribute or -moz-user-input: none. + */ + boolean isNodeDisabledForEvents(in Node aNode); + + /* + * Returns the value of a given property animated on the compositor thread. + * If the property is NOT currently being animated on the compositor thread, + * returns an empty string. + * NOTE: Do not use this function for elements that there was another + * animation running on the compositor before. + */ + AString getOMTAStyle(in Element aElement, in AString aProperty, + [optional] in AString aPseudoElement); + + /* + * Returns true if the given animation is being tracked by the pending + * animation tracker for the current document. + */ + bool isAnimationInPendingTracker(in Animation aAnimation); + + /** + * If aHandlingInput is true, this informs the event state manager that + * we're handling user input, and provides transient user activation. + * Otherwise, this is a no-op (as by default we're not handling user input). + * Remember to call destruct() on the return value! + * See also nsIDOMWindowUtils::isHandlingUserInput. + */ + nsIJSRAIIHelper setHandlingUserInput(in boolean aHandlingInput); + + /** + * Returns true if a keyboard event qualifies as "user activity" such that + * it would mark the document with the ChromeOnly userHasInteracted + * property. + */ + bool isKeyboardEventUserActivity(in Event aKeyboardEvent); + + /** + * Get the content- and compositor-side APZ test data instances. + * The return values are of type APZTestData (see APZTestData.webidl). + */ + [implicit_jscontext] jsval getContentAPZTestData(); + [implicit_jscontext] jsval getCompositorAPZTestData(); + + /** + * Posts an RestyleHint::RESTYLE_SELF restyle event for the given element. + */ + void postRestyleSelfEvent(in Element aElement); + + /** + * This method doesn't do anything useful. It was solely added for the + * purpose of the test for bug 503926. + */ + void xpconnectArgument(in nsISupports aObj); + + /** + * Helper for JS components that need to send permission requests with + * e10s support properly. + */ + void askPermission(in nsIContentPermissionRequest aRequest); + + /** + * Restyle generation for the current document. + * + * May throw NS_ERROR_NOT_AVAILABLE. + */ + readonly attribute unsigned long long restyleGeneration; + + /** + * Number of frames constructed (excluding breaking) for the curent + * document. + * + * May throw NS_ERROR_NOT_AVAILABLE. + */ + readonly attribute unsigned long long framesConstructed; + + /** + * Number of frames reflowed for the curent document. + * + * May throw NS_ERROR_NOT_AVAILABLE. + */ + readonly attribute unsigned long long framesReflowed; + + /** + * Indicates whether the current frame's refresh driver has a pending tick, + * as reported by nsRefreshDriver::HasPendingTick. + * + * May throw NS_ERROR_NOT_AVAILABLE. + */ + readonly attribute bool refreshDriverHasPendingTick; + + /** + * Controls the amount of chrome that should be visible on each side of + * the window. Works like the chromemargin xul:window attribute. + * This should only be used with non-XUL windows. + */ + void setChromeMargin(in int32_t aTop, + in int32_t aRight, + in int32_t aBottom, + in int32_t aLeft); + + /** + * Controls the amount of space on each edge of the window that can be + * dragged to resize the window in that direction. + * + * @param aResizeMargin In CSS pixels, will apply to all four window sides. + */ + void setResizeMargin(in int32_t aResizeMargin); + + /** + * Returns a JSObject which contains a list of frame uniformities + * when the pref gfx.vsync.collect-scroll-data is enabled. + * Every result contains a layer address and a frame uniformity for that layer. + * A negative frame uniformity value indicates an invalid frame uniformity and an error has occured. + */ + [implicit_jscontext] jsval getFrameUniformityTestData(); + + /* + * Increase the chaos mode activation level. An equivalent number of + * calls to leaveChaosMode must be made in order to restore the original + * chaos mode state. If the activation level is nonzero all chaos mode + * features are activated. + */ + void enterChaosMode(); + + /** + * Decrease the chaos mode activation level. See enterChaosMode(). + */ + void leaveChaosMode(); + + /** + * Alerts Gecko of a device reset + */ + void triggerDeviceReset(); + + /** + * Returns whether the document's style set's rule processor for the + * specified level of the cascade is shared by multiple style sets. + * (Used by tests to ensure that certain optimizations do not regress.) + * + * @param aSheetType One of the nsIStyleSheetService.*_SHEET constants. + */ + bool hasRuleProcessorUsedByMultipleStyleSets(in unsigned long aSheetType); + + /** + * Enable or disable displayport suppression. This is intended to be used by + * testing code, to provide more deterministic behaviour over the displayport + * suppression during tests. Note that this updates a flag, so whatever value + * was last provided is what will be used. + */ + void respectDisplayPortSuppression(in boolean aEnabled); + + /** + * Set a flag that forces the next reflow interrupt check to return true. This + * can be used by tests to force execution of the interrupted reflow codepaths. + */ + void forceReflowInterrupt(); + + /** + * Terminate the GPU process. Used for testing GPU process restarts. + */ + void terminateGPUProcess(); + + /** + * Returns the GPU process pid, or -1 if there is no GPU process. + */ + readonly attribute int32_t gpuProcessPid; + + /** + * Adds an ElementState bit to the element. + * + * The state string must be one of the following: + * * (none yet; but for example "higlighted" for ElementState::HIGHLIGHTED) + * + * The supported state strings are defined in kManuallyManagedStates + * in nsDOMWindowUtils.cpp. + */ + void addManuallyManagedState(in Element element, + in AString state); + + /** + * Removes the specified ElementState bits from the element. + * + * See above for the strings that can be passed for |state|. + */ + void removeManuallyManagedState(in Element element, + in AString state); + + /** + * Returns usage data for a given storage object. + * + * @param aStorage + * The storage object to get usage data for. + */ + int64_t getStorageUsage(in Storage aStorage); + + /** + * Returns the directionality of a string using the first-strong character + * algorithm defined in http://unicode.org/reports/tr9/#P2. + * + * @param aString the string to retrieve the direction for. + * @return one of DIRECTION_LTR, DIRECTION_RTL or DIRECTION_NOT_SET depending + * on the first-strong character found in the string. + */ + long getDirectionFromText(in AString aString); + + /** + * Calls FrameNeedsReflow on that root frame so that a layout flush + * will be necessary. + * + * This should only be used for testing. + */ + void ensureDirtyRootFrame(); + + /** + * Capture the contents of the current WebRender frame and + * save them to a folder relative to the current working directory. + */ + void wrCapture(); + + /** + * Flag bits for use in |wrStartCaptureSequence|'s |aFlags| argument. + */ + const uint32_t WR_CAPTURE_SCENE = 0x1; + const uint32_t WR_CAPTURE_FRAME = 0x2; + const uint32_t WR_CAPTURE_TILE_CACHE = 0x4; + const uint32_t WR_CAPTURE_EXTERNAL_RESOURCES = 0x8; + + /** + * Start capturing each WebRender frame to disk. + * + * |aPath| is the name of a new directory to be created to hold the captures. + * it is relative to: + * - the |PUBLIC_STORAGE| environment variable, if set, else + * - the |MOZ_UPLOAD_DIR| environment variable, if set, else + * - the user's home directory, if known, else + * the current directory. + * + * If there is already a directory with the given name, a numeric suffix is + * added to ensure a fresh directory is created. This means that you can't + * be sure your capture directory is actually named |aPath|. + * + * |aFlags| is a set of flags from |webrender::render_api::CaptureBits|. + * + * If there is already a sequence capture in progress, stop it and start a new + * one, with the new path and flags. + */ + void wrStartCaptureSequence(in ACString aPath, in uint32_t aFlags); + + /** + * Stop a capture begun with |wrStartCaptureSequence|. + */ + void wrStopCaptureSequence(); + + /** + * Toggle recording of composition on and off. + * + * This is equivalent to calling |startCompositionRecorder()| or + * |stopCompositionRecorder(true)|. + */ + Promise setCompositionRecording(in boolean aValue); + + /** + * Start the composition recorder. + * + * @return A promise that is resolved to true if the composion recorder was + * started successfully. + */ + Promise startCompositionRecording(); + + /** + * Stop the composition recorder. + * + * @param aWriteToDisk Whether or not the frames should be written to disk. + * If false, they will be returned in the promise. + * @return A promise that resolves when the frames have been collected. + * When |aWriteToDisk| is true, the promise will resolve to |undefined|. + * Otherwise, the promise will resolve to a |DOMCollectedFrames| dictionary, + * which contains the timestamps and contents of the captured frames. + */ + Promise stopCompositionRecording(in boolean aWriteToDisk); + + /** + * Returns whether the document we're associated to has recorded a given CSS + * property via the use counter mechanism. + * + * Throws if there's no document or the property is invalid. + */ + bool isCssPropertyRecordedInUseCounter(in ACString aProperty); + + /** + * Calls SetInitialViewport on the MobileViewportManager, which effectively + * causes it to refresh all of its internal state and update things that + * need updating. + */ + void resetMobileViewportManager(); + + bool isCoepCredentialless(); + + /** + * Change the DPI setting for the primary monitor. + * This setHiDPIMode and restoreHiDPIMode below are only available on debug + * builds since these APIs are supposed to be used in tests. + * + * Note that on Mac, this API doesn't change the system DPI setting, rather it + * changes our internal state of DPI settings, thus it will not invoke the + * exact same stuff when the system DPI setting is changed. + * + */ + void setHiDPIMode(in boolean aHiDPI); + /** + * Restore the modified HiDPI mode. + */ + void restoreHiDPIMode(); + + /** + * NOTE: Currently works only on GTK+. + */ + attribute ACString systemFont; + + /** + * Returns the number of times this document for this window has + * been painted to the screen. + */ + readonly attribute unsigned long long paintCount; + + // These consts are only for testing purposes. + const long DEFAULT_MOUSE_POINTER_ID = 0; + const long DEFAULT_PEN_POINTER_ID = 1; + const long DEFAULT_TOUCH_POINTER_ID = 2; + + // Match mozilla::MouseButton. + const long MOUSE_BUTTON_LEFT_BUTTON = 0; + const long MOUSE_BUTTON_MIDDLE_BUTTON = 1; + const long MOUSE_BUTTON_RIGHT_BUTTON = 2; + + // Match mozilla::MouseButtonsFlag. + const long MOUSE_BUTTONS_NO_BUTTON = 0x00; + const long MOUSE_BUTTONS_LEFT_BUTTON = 0x01; + const long MOUSE_BUTTONS_RIGHT_BUTTON = 0x02; + const long MOUSE_BUTTONS_MIDDLE_BUTTON = 0x04; + // Typically, "back" button being left side of 5-button + // mice, see "buttons" attribute document of DOM3 Events. + const long MOUSE_BUTTONS_4TH_BUTTON = 0x08; + // Typically, "forward" button being right side of 5-button + // mice, see "buttons" attribute document of DOM3 Events. + const long MOUSE_BUTTONS_5TH_BUTTON = 0x10; + // Buttons are not specified, will be calculated from |aButton|. + const long MOUSE_BUTTONS_NOT_SPECIFIED = -1; + + // Return values for getDirectionFromText(). + const long DIRECTION_LTR = 0; + const long DIRECTION_RTL = 1; + const long DIRECTION_NOT_SET = 2; + + void syncFlushCompositor(); + + unsigned long long getLayersId(); + + // Returns true if we are effectively throttling frame requests. + readonly attribute bool effectivelyThrottlesFrameRequests; + + // Returns the ID for the underlying window widget, which can + // be compared against the rawId from a nsIMediaDevice to determine + // if the window is being shared. + // + // Using this only makes sense in the parent process, and the function + // will intentionally crash any non-parent process that tries to access + // it. + readonly attribute AString webrtcRawDeviceId; + + // Used for testing to check the suspend status. + readonly attribute bool suspendedByBrowsingContextGroup; + + // Whether there's any scroll-linked effect in this document. This is only + // meaningful after the script in question tried to mutate something in a + // scroll event callback until the next refresh driver tick happens. + // + // See https://firefox-source-docs.mozilla.org/performance/scroll-linked_effects.html + // about scroll-linked effects. + readonly attribute bool hasScrollLinkedEffect; + + // Returns the current orientation lock value in browsing context. + // This value is defined in hal/HalScreenConfiguration.h + readonly attribute uint32_t orientationLock; + + // Returns an element currently scrolling by wheel. + Element getWheelScrollTarget(); +}; + +[scriptable, uuid(c694e359-7227-4392-a138-33c0cc1f15a6)] +interface nsITranslationNodeList : nsISupports { + readonly attribute unsigned long length; + Node item(in unsigned long index); + + // A translation root is a block element, or an inline element + // which its parent is not a translation node. + boolean isTranslationRootAtIndex(in unsigned long index); +}; + +/** + * JS doesn't do RAII very well. We can use this interface to make remembering + * to destruct an object in a finally clause easier. + */ +[scriptable, uuid(52e5a996-d0a9-4efc-a6fa-24489c532b19)] +interface nsIJSRAIIHelper : nsISupports { + void destruct(); +}; |