diff options
Diffstat (limited to 'tools/jprof/stub')
| -rw-r--r-- | tools/jprof/stub/Makefile.in | 8 | ||||
| -rw-r--r-- | tools/jprof/stub/config.h | 18 | ||||
| -rw-r--r-- | tools/jprof/stub/jprof.h | 17 | ||||
| -rw-r--r-- | tools/jprof/stub/libmalloc.cpp | 740 | ||||
| -rw-r--r-- | tools/jprof/stub/libmalloc.h | 45 | ||||
| -rw-r--r-- | tools/jprof/stub/moz.build | 17 |
6 files changed, 845 insertions, 0 deletions
diff --git a/tools/jprof/stub/Makefile.in b/tools/jprof/stub/Makefile.in new file mode 100644 index 0000000000..8e6b6b8f8d --- /dev/null +++ b/tools/jprof/stub/Makefile.in @@ -0,0 +1,8 @@ +#! gmake +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +# override optimization +MOZ_OPTIMIZE_FLAGS = -fno-omit-frame-pointer diff --git a/tools/jprof/stub/config.h b/tools/jprof/stub/config.h new file mode 100644 index 0000000000..6e5789452a --- /dev/null +++ b/tools/jprof/stub/config.h @@ -0,0 +1,18 @@ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#ifndef config_h___ +#define config_h___ + +#define MAX_STACK_CRAWL 500 +#define M_LOGFILE "jprof-log" +#define M_MAPFILE "jprof-map" + +#if defined(linux) || defined(NTO) +# define USE_BFD +# undef NEED_WRAPPERS + +#endif /* linux */ + +#endif /* config_h___ */ diff --git a/tools/jprof/stub/jprof.h b/tools/jprof/stub/jprof.h new file mode 100644 index 0000000000..c118760750 --- /dev/null +++ b/tools/jprof/stub/jprof.h @@ -0,0 +1,17 @@ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#ifndef jprof_h___ +#define jprof_h___ +#include "nscore.h" + +#ifdef _IMPL_JPPROF_API +# define JPROF_API(type) NS_EXPORT_(type) +#else +# define JPROF_API(type) NS_IMPORT_(type) +#endif + +JPROF_API(void) setupProfilingStuff(void); + +#endif /* jprof_h___ */ diff --git a/tools/jprof/stub/libmalloc.cpp b/tools/jprof/stub/libmalloc.cpp new file mode 100644 index 0000000000..3003543a93 --- /dev/null +++ b/tools/jprof/stub/libmalloc.cpp @@ -0,0 +1,740 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +// vim:cindent:sw=4:et:ts=8: +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +// The linux glibc hides part of sigaction if _POSIX_SOURCE is defined +#if defined(linux) +# undef _POSIX_SOURCE +# undef _SVID_SOURCE +# ifndef _GNU_SOURCE +# define _GNU_SOURCE +# endif +#endif + +#include <errno.h> +#if defined(linux) +# include <linux/rtc.h> +# include <pthread.h> +#endif +#include <unistd.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <signal.h> +#include <sys/time.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <sys/stat.h> +#include <sys/syscall.h> +#include <ucontext.h> +#include <execinfo.h> + +#include "libmalloc.h" +#include "jprof.h" +#include <string.h> +#include <errno.h> +#include <dlfcn.h> + +#ifdef NTO +# include <sys/link.h> +extern r_debug _r_debug; +#else +# include <link.h> +#endif + +#define USE_GLIBC_BACKTRACE 1 +// To debug, use #define JPROF_STATIC +#define JPROF_STATIC static + +static int gLogFD = -1; +static pthread_t main_thread; + +static bool gIsChild = false; +static int gFilenamePID; + +static void startSignalCounter(unsigned long millisec); +static int enableRTCSignals(bool enable); + +//---------------------------------------------------------------------- +// replace use of atexit() + +static void DumpAddressMap(); + +struct JprofShutdown { + JprofShutdown() {} + ~JprofShutdown() { DumpAddressMap(); } +}; + +static void RegisterJprofShutdown() { + // This instanciates the dummy class above, and will trigger the class + // destructor when libxul is unloaded. This is equivalent to atexit(), + // but gracefully handles dlclose(). + static JprofShutdown t; +} + +#if defined(i386) || defined(_i386) || defined(__x86_64__) +JPROF_STATIC void CrawlStack(malloc_log_entry* me, void* stack_top, + void* top_instr_ptr) { +# if USE_GLIBC_BACKTRACE + // This probably works on more than x86! But we need a way to get the + // top instruction pointer, which is kindof arch-specific + void* array[500]; + int cnt, i; + u_long numpcs = 0; + + // This is from glibc. A more generic version might use + // libunwind and/or CaptureStackBackTrace() on Windows + cnt = backtrace(&array[0], sizeof(array) / sizeof(array[0])); + + // StackHook->JprofLog->CrawlStack + // Then we have sigaction, which replaced top_instr_ptr + array[3] = top_instr_ptr; + for (i = 3; i < cnt; i++) { + me->pcs[numpcs++] = (char*)array[i]; + } + me->numpcs = numpcs; + +# else + // original code - this breaks on many platforms + void** bp; +# if defined(__i386) + __asm__("movl %%ebp, %0" : "=g"(bp)); +# elif defined(__x86_64__) + __asm__("movq %%rbp, %0" : "=g"(bp)); +# else + // It would be nice if this worked uniformly, but at least on i386 and + // x86_64, it stopped working with gcc 4.1, because it points to the + // end of the saved registers instead of the start. + bp = __builtin_frame_address(0); +# endif + u_long numpcs = 0; + bool tracing = false; + + me->pcs[numpcs++] = (char*)top_instr_ptr; + + while (numpcs < MAX_STACK_CRAWL) { + void** nextbp = (void**)*bp++; + void* pc = *bp; + if (nextbp < bp) { + break; + } + if (tracing) { + // Skip the signal handling. + me->pcs[numpcs++] = (char*)pc; + } else if (pc == top_instr_ptr) { + tracing = true; + } + bp = nextbp; + } + me->numpcs = numpcs; +# endif +} +#endif + +//---------------------------------------------------------------------- + +static int rtcHz; +static int rtcFD = -1; +static bool circular = false; + +#if defined(linux) || defined(NTO) +static void DumpAddressMap() { + // Turn off the timer so we don't get interrupts during shutdown +# if defined(linux) + if (rtcHz) { + enableRTCSignals(false); + } else +# endif + { + startSignalCounter(0); + } + + char filename[2048]; + if (gIsChild) + snprintf(filename, sizeof(filename), "%s-%d", M_MAPFILE, gFilenamePID); + else + snprintf(filename, sizeof(filename), "%s", M_MAPFILE); + + int mfd = open(filename, O_CREAT | O_WRONLY | O_TRUNC, 0666); + if (mfd >= 0) { + malloc_map_entry mme; + link_map* map = _r_debug.r_map; + while (nullptr != map) { + if (map->l_name && *map->l_name) { + mme.nameLen = strlen(map->l_name); + mme.address = map->l_addr; + write(mfd, &mme, sizeof(mme)); + write(mfd, map->l_name, mme.nameLen); +# if 0 + write(1, map->l_name, mme.nameLen); + write(1, "\n", 1); +# endif + } + map = map->l_next; + } + close(mfd); + } +} +#endif + +static bool was_paused = true; + +JPROF_STATIC void JprofBufferDump(); +JPROF_STATIC void JprofBufferClear(); + +static void ClearProfilingHook(int signum) { + if (circular) { + JprofBufferClear(); + puts("Jprof: cleared circular buffer."); + } +} + +static void EndProfilingHook(int signum) { + if (circular) JprofBufferDump(); + + DumpAddressMap(); + was_paused = true; + puts("Jprof: profiling paused."); +} + +//---------------------------------------------------------------------- +// proper usage would be a template, including the function to find the +// size of an entry, or include a size header explicitly to each entry. +#if defined(linux) +# define DUMB_LOCK() pthread_mutex_lock(&mutex); +# define DUMB_UNLOCK() pthread_mutex_unlock(&mutex); +#else +# define DUMB_LOCK() FIXME() +# define DUMB_UNLOCK() FIXME() +#endif + +class DumbCircularBuffer { + public: + DumbCircularBuffer(size_t init_buffer_size) { + used = 0; + buffer_size = init_buffer_size; + buffer = (unsigned char*)malloc(buffer_size); + head = tail = buffer; + +#if defined(linux) + pthread_mutexattr_t mAttr; + pthread_mutexattr_settype(&mAttr, PTHREAD_MUTEX_RECURSIVE_NP); + pthread_mutex_init(&mutex, &mAttr); + pthread_mutexattr_destroy(&mAttr); +#endif + } + ~DumbCircularBuffer() { + free(buffer); +#if defined(linux) + pthread_mutex_destroy(&mutex); +#endif + } + + void clear() { + DUMB_LOCK(); + head = tail; + used = 0; + DUMB_UNLOCK(); + } + + bool empty() { return head == tail; } + + size_t space_available() { + size_t result; + DUMB_LOCK(); + if (tail > head) + result = buffer_size - (tail - head) - 1; + else + result = head - tail - 1; + DUMB_UNLOCK(); + return result; + } + + void drop(size_t size) { + // assumes correctness! + DUMB_LOCK(); + head += size; + if (head >= &buffer[buffer_size]) head -= buffer_size; + used--; + DUMB_UNLOCK(); + } + + bool insert(void* data, size_t size) { + // can fail if not enough space in the entire buffer + DUMB_LOCK(); + if (space_available() < size) return false; + + size_t max_without_wrap = &buffer[buffer_size] - tail; + size_t initial = size > max_without_wrap ? max_without_wrap : size; +#if DEBUG_CIRCULAR + fprintf(stderr, "insert(%d): max_without_wrap %d, size %d, initial %d\n", + used, max_without_wrap, size, initial); +#endif + memcpy(tail, data, initial); + tail += initial; + data = ((char*)data) + initial; + size -= initial; + if (size != 0) { +#if DEBUG_CIRCULAR + fprintf(stderr, "wrapping by %d bytes\n", size); +#endif + memcpy(buffer, data, size); + tail = &(((unsigned char*)buffer)[size]); + } + + used++; + DUMB_UNLOCK(); + + return true; + } + + // for external access to the buffer (saving) + void lock() { DUMB_LOCK(); } + + void unlock() { DUMB_UNLOCK(); } + + // XXX These really shouldn't be public... + unsigned char* head; + unsigned char* tail; + unsigned int used; + unsigned char* buffer; + size_t buffer_size; + + private: + pthread_mutex_t mutex; +}; + +class DumbCircularBuffer* JprofBuffer; + +JPROF_STATIC void JprofBufferInit(size_t size) { + JprofBuffer = new DumbCircularBuffer(size); +} + +JPROF_STATIC void JprofBufferClear() { + fprintf(stderr, "Told to clear JPROF circular buffer\n"); + JprofBuffer->clear(); +} + +JPROF_STATIC size_t JprofEntrySizeof(malloc_log_entry* me) { + return offsetof(malloc_log_entry, pcs) + me->numpcs * sizeof(char*); +} + +JPROF_STATIC void JprofBufferAppend(malloc_log_entry* me) { + size_t size = JprofEntrySizeof(me); + + do { + while (JprofBuffer->space_available() < size && JprofBuffer->used > 0) { +#if DEBUG_CIRCULAR + fprintf( + stderr, + "dropping entry: %d in use, %d free, need %d, size_to_free = %d\n", + JprofBuffer->used, JprofBuffer->space_available(), size, + JprofEntrySizeof((malloc_log_entry*)JprofBuffer->head)); +#endif + JprofBuffer->drop(JprofEntrySizeof((malloc_log_entry*)JprofBuffer->head)); + } + if (JprofBuffer->space_available() < size) return; + + } while (!JprofBuffer->insert(me, size)); +} + +JPROF_STATIC void JprofBufferDump() { + JprofBuffer->lock(); +#if DEBUG_CIRCULAR + fprintf( + stderr, "dumping JP_CIRCULAR buffer, %d of %d bytes\n", + JprofBuffer->tail > JprofBuffer->head + ? JprofBuffer->tail - JprofBuffer->head + : JprofBuffer->buffer_size + JprofBuffer->tail - JprofBuffer->head, + JprofBuffer->buffer_size); +#endif + if (JprofBuffer->tail >= JprofBuffer->head) { + write(gLogFD, JprofBuffer->head, JprofBuffer->tail - JprofBuffer->head); + } else { + write(gLogFD, JprofBuffer->head, + &(JprofBuffer->buffer[JprofBuffer->buffer_size]) - JprofBuffer->head); + write(gLogFD, JprofBuffer->buffer, JprofBuffer->tail - JprofBuffer->buffer); + } + JprofBuffer->clear(); + JprofBuffer->unlock(); +} + +//---------------------------------------------------------------------- + +JPROF_STATIC void JprofLog(u_long aTime, void* stack_top, void* top_instr_ptr) { + // Static is simply to make debugging tolerable + static malloc_log_entry me; + + me.delTime = aTime; + me.thread = syscall(SYS_gettid); // gettid(); + if (was_paused) { + me.flags = JP_FIRST_AFTER_PAUSE; + was_paused = 0; + } else { + me.flags = 0; + } + + CrawlStack(&me, stack_top, top_instr_ptr); + +#ifndef NTO + if (circular) { + JprofBufferAppend(&me); + } else { + write(gLogFD, &me, JprofEntrySizeof(&me)); + } +#else + printf("Neutrino is missing the pcs member of malloc_log_entry!! \n"); +#endif +} + +static int realTime; + +/* Lets interrupt at 10 Hz. This is so my log files don't get too large. + * This can be changed to a faster value latter. This timer is not + * programmed to reset, even though it is capable of doing so. This is + * to keep from getting interrupts from inside of the handler. + */ +static void startSignalCounter(unsigned long millisec) { + struct itimerval tvalue; + + tvalue.it_interval.tv_sec = 0; + tvalue.it_interval.tv_usec = 0; + tvalue.it_value.tv_sec = millisec / 1000; + tvalue.it_value.tv_usec = (millisec % 1000) * 1000; + + if (realTime) { + setitimer(ITIMER_REAL, &tvalue, nullptr); + } else { + setitimer(ITIMER_PROF, &tvalue, nullptr); + } +} + +static long timerMilliSec = 50; + +#if defined(linux) +static int setupRTCSignals(int hz, struct sigaction* sap) { + /* global */ rtcFD = open("/dev/rtc", O_RDONLY); + if (rtcFD < 0) { + perror("JPROF_RTC setup: open(\"/dev/rtc\", O_RDONLY)"); + return 0; + } + + if (sigaction(SIGIO, sap, nullptr) == -1) { + perror("JPROF_RTC setup: sigaction(SIGIO)"); + return 0; + } + + if (ioctl(rtcFD, RTC_IRQP_SET, hz) == -1) { + perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_IRQP_SET, $JPROF_RTC_HZ)"); + return 0; + } + + if (ioctl(rtcFD, RTC_PIE_ON, 0) == -1) { + perror("JPROF_RTC setup: ioctl(/dev/rtc, RTC_PIE_ON)"); + return 0; + } + + if (fcntl(rtcFD, F_SETSIG, 0) == -1) { + perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETSIG, 0)"); + return 0; + } + + if (fcntl(rtcFD, F_SETOWN, getpid()) == -1) { + perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETOWN, getpid())"); + return 0; + } + + return 1; +} + +static int enableRTCSignals(bool enable) { + static bool enabled = false; + if (enabled == enable) { + return 0; + } + enabled = enable; + + int flags = fcntl(rtcFD, F_GETFL); + if (flags < 0) { + perror("JPROF_RTC setup: fcntl(/dev/rtc, F_GETFL)"); + return 0; + } + + if (enable) { + flags |= FASYNC; + } else { + flags &= ~FASYNC; + } + + if (fcntl(rtcFD, F_SETFL, flags) == -1) { + if (enable) { + perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags | FASYNC)"); + } else { + perror("JPROF_RTC setup: fcntl(/dev/rtc, F_SETFL, flags & ~FASYNC)"); + } + return 0; + } + + return 1; +} +#endif + +JPROF_STATIC void StackHook(int signum, siginfo_t* info, void* ucontext) { + static struct timeval tFirst; + static int first = 1; + size_t millisec = 0; + +#if defined(linux) + if (rtcHz && pthread_self() != main_thread) { + // Only collect stack data on the main thread, for now. + return; + } +#endif + + if (first && !(first = 0)) { + puts("Jprof: received first signal"); +#if defined(linux) + if (rtcHz) { + enableRTCSignals(true); + } else +#endif + { + gettimeofday(&tFirst, 0); + millisec = 0; + } + } else { +#if defined(linux) + if (rtcHz) { + enableRTCSignals(true); + } else +#endif + { + struct timeval tNow; + gettimeofday(&tNow, 0); + double usec = 1e6 * (tNow.tv_sec - tFirst.tv_sec); + usec += (tNow.tv_usec - tFirst.tv_usec); + millisec = static_cast<size_t>(usec * 1e-3); + } + } + + gregset_t& gregs = ((ucontext_t*)ucontext)->uc_mcontext.gregs; +#ifdef __x86_64__ + JprofLog(millisec, (void*)gregs[REG_RSP], (void*)gregs[REG_RIP]); +#else + JprofLog(millisec, (void*)gregs[REG_ESP], (void*)gregs[REG_EIP]); +#endif + + if (!rtcHz) startSignalCounter(timerMilliSec); +} + +NS_EXPORT_(void) setupProfilingStuff(void) { + static int gFirstTime = 1; + char filename[2048]; // XXX fix + + if (gFirstTime && !(gFirstTime = 0)) { + int startTimer = 1; + int doNotStart = 1; + int firstDelay = 0; + int append = O_TRUNC; + char* tst = getenv("JPROF_FLAGS"); + + /* Options from JPROF_FLAGS environment variable: + * JP_DEFER -> Wait for a SIGPROF (or SIGALRM, if JP_REALTIME + * is set) from userland before starting + * to generate them internally + * JP_START -> Install the signal handler + * JP_PERIOD -> Time between profiler ticks + * JP_FIRST -> Extra delay before starting + * JP_REALTIME -> Take stack traces in intervals of real time + * rather than time used by the process (and the + * system for the process). This is useful for + * finding time spent by the X server. + * JP_APPEND -> Append to jprof-log rather than overwriting it. + * This is somewhat risky since it depends on the + * address map staying constant across multiple runs. + * JP_FILENAME -> base filename to use when saving logs. Note that + * this does not affect the mapfile. + * JP_CIRCULAR -> use a circular buffer of size N, write/clear on SIGUSR1 + * + * JPROF_ISCHILD is set if this is not the first process. + */ + + circular = false; + + if (tst) { + if (strstr(tst, "JP_DEFER")) { + doNotStart = 0; + startTimer = 0; + } + if (strstr(tst, "JP_START")) doNotStart = 0; + if (strstr(tst, "JP_REALTIME")) realTime = 1; + if (strstr(tst, "JP_APPEND")) append = O_APPEND; + + char* delay = strstr(tst, "JP_PERIOD="); + if (delay) { + double tmp = strtod(delay + strlen("JP_PERIOD="), nullptr); + if (tmp >= 1e-3) { + timerMilliSec = static_cast<unsigned long>(1000 * tmp); + } else { + fprintf(stderr, "JP_PERIOD of %g less than 0.001 (1ms), using 1ms\n", + tmp); + timerMilliSec = 1; + } + } + + char* circular_op = strstr(tst, "JP_CIRCULAR="); + if (circular_op) { + size_t size = atol(circular_op + strlen("JP_CIRCULAR=")); + if (size < 1000) { + fprintf(stderr, "JP_CIRCULAR of %lu less than 1000, using 10000\n", + (unsigned long)size); + size = 10000; + } + JprofBufferInit(size); + fprintf(stderr, "JP_CIRCULAR buffer of %lu bytes\n", + (unsigned long)size); + circular = true; + } + + char* first = strstr(tst, "JP_FIRST="); + if (first) { + firstDelay = atol(first + strlen("JP_FIRST=")); + } + + char* rtc = strstr(tst, "JP_RTC_HZ="); + if (rtc) { +#if defined(linux) + rtcHz = atol(rtc + strlen("JP_RTC_HZ=")); + timerMilliSec = 0; /* This makes JP_FIRST work right. */ + realTime = 1; /* It's the _R_TC and all. ;) */ + +# define IS_POWER_OF_TWO(x) (((x) & ((x)-1)) == 0) + + if (!IS_POWER_OF_TWO(rtcHz) || rtcHz < 2) { + fprintf(stderr, + "JP_RTC_HZ must be power of two and >= 2, " + "but %d was provided; using default of 2048\n", + rtcHz); + rtcHz = 2048; + } +#else + fputs( + "JP_RTC_HZ found, but RTC profiling only supported on " + "Linux!\n", + stderr); + +#endif + } + const char* f = strstr(tst, "JP_FILENAME="); + if (f) + f = f + strlen("JP_FILENAME="); + else + f = M_LOGFILE; + + char* is_child = getenv("JPROF_ISCHILD"); + if (!is_child) setenv("JPROF_ISCHILD", "", 0); + gIsChild = !!is_child; + + gFilenamePID = syscall(SYS_gettid); // gettid(); + if (is_child) + snprintf(filename, sizeof(filename), "%s-%d", f, gFilenamePID); + else + snprintf(filename, sizeof(filename), "%s", f); + + // XXX FIX! inherit current capture state! + } + + if (!doNotStart) { + if (gLogFD < 0) { + gLogFD = open(filename, O_CREAT | O_WRONLY | append, 0666); + if (gLogFD < 0) { + fprintf(stderr, "Unable to create " M_LOGFILE); + perror(":"); + } else { + struct sigaction action; + sigset_t mset; + + // Dump out the address map when we terminate + RegisterJprofShutdown(); + + main_thread = pthread_self(); + // fprintf(stderr,"jprof: main_thread = %u\n", + // (unsigned int)main_thread); + + // FIX! probably should block these against each other + // Very unlikely. + sigemptyset(&mset); + action.sa_handler = nullptr; + action.sa_sigaction = StackHook; + action.sa_mask = mset; + action.sa_flags = SA_RESTART | SA_SIGINFO; +#if defined(linux) + if (rtcHz) { + if (!setupRTCSignals(rtcHz, &action)) { + fputs( + "jprof: Error initializing RTC, NOT " + "profiling\n", + stderr); + return; + } + } + + if (!rtcHz || firstDelay != 0) +#endif + { + if (realTime) { + sigaction(SIGALRM, &action, nullptr); + } + } + // enable PROF in all cases to simplify JP_DEFER/pause/restart + sigaction(SIGPROF, &action, nullptr); + + // make it so a SIGUSR1 will stop the profiling + // Note: It currently does not close the logfile. + // This could be configurable (so that it could + // later be reopened). + + struct sigaction stop_action; + stop_action.sa_handler = EndProfilingHook; + stop_action.sa_mask = mset; + stop_action.sa_flags = SA_RESTART; + sigaction(SIGUSR1, &stop_action, nullptr); + + // make it so a SIGUSR2 will clear the circular buffer + + stop_action.sa_handler = ClearProfilingHook; + stop_action.sa_mask = mset; + stop_action.sa_flags = SA_RESTART; + sigaction(SIGUSR2, &stop_action, nullptr); + + printf( + "Jprof: Initialized signal handler and set " + "timer for %lu %s, %d s " + "initial delay\n", + rtcHz ? rtcHz : timerMilliSec, rtcHz ? "Hz" : "ms", firstDelay); + + if (startTimer) { +#if defined(linux) + /* If we have an initial delay we can just use + startSignalCounter to set up a timer to fire the + first stackHook after that delay. When that happens + we'll go and switch to RTC profiling. */ + if (rtcHz && firstDelay == 0) { + puts("Jprof: enabled RTC signals"); + enableRTCSignals(true); + } else +#endif + { + puts("Jprof: started timer"); + startSignalCounter(firstDelay * 1000 + timerMilliSec); + } + } + } + } + } + } else { + printf("setupProfilingStuff() called multiple times\n"); + } +} diff --git a/tools/jprof/stub/libmalloc.h b/tools/jprof/stub/libmalloc.h new file mode 100644 index 0000000000..a78b35ade8 --- /dev/null +++ b/tools/jprof/stub/libmalloc.h @@ -0,0 +1,45 @@ +/* This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ + +#ifndef libmalloc_h___ +#define libmalloc_h___ + +#include <sys/types.h> +#include <malloc.h> + +#ifdef __cplusplus +extern "C" { +#endif + +#include "config.h" + +typedef unsigned long u_long; + +// For me->flags +#define JP_FIRST_AFTER_PAUSE 1 + +// Format of a jprof log entry. This is what's written out to the +// "jprof-log" file. +// It's called malloc_log_entry because the history of jprof is that +// it's a modified version of tracemalloc. +struct malloc_log_entry { + u_long delTime; + u_long numpcs; + unsigned int flags; + int thread; + char* pcs[MAX_STACK_CRAWL]; +}; + +// Format of a malloc map entry; after this struct is nameLen+1 bytes of +// name data. +struct malloc_map_entry { + u_long nameLen; + u_long address; // base address +}; + +#ifdef __cplusplus +} /* end of extern "C" */ +#endif + +#endif /* libmalloc_h___ */ diff --git a/tools/jprof/stub/moz.build b/tools/jprof/stub/moz.build new file mode 100644 index 0000000000..692c6ea37f --- /dev/null +++ b/tools/jprof/stub/moz.build @@ -0,0 +1,17 @@ +# -*- Mode: python; indent-tabs-mode: nil; tab-width: 40 -*- +# vim: set filetype=python: +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + +EXPORTS += [ + "jprof.h", +] + +SOURCES += [ + "libmalloc.cpp", +] + +SharedLibrary("jprof") + +DEFINES["_IMPL_JPROF_API"] = True |