From 6bf0a5cb5034a7e684dcc3500e841785237ce2dd Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 19:32:43 +0200 Subject: Adding upstream version 1:115.7.0. Signed-off-by: Daniel Baumann --- docs/performance/tools_power_rapl.md | 113 +++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 docs/performance/tools_power_rapl.md (limited to 'docs/performance/tools_power_rapl.md') diff --git a/docs/performance/tools_power_rapl.md b/docs/performance/tools_power_rapl.md new file mode 100644 index 0000000000..3bf2555bd6 --- /dev/null +++ b/docs/performance/tools_power_rapl.md @@ -0,0 +1,113 @@ +# tools/power/rapl + +`tools/power/rapl` (or `rapl` for short) is a command-line utility in +the Mozilla tree that periodically reads and prints all available Intel +RAPL power estimates. These are machine-wide estimates, so if you want +to estimate the power consumption of a single program you should +minimize other activity on the machine while measuring. + +**Note**: The [power profiling overview](power_profiling_overview.md) is +worth reading at this point if you haven't already. It may make parts +of this document easier to understand. + +## Invocation + +First, do a [standard build of Firefox](/setup/index.rst). + +### Mac + +On Mac, `rapl` can be run as follows. + +```bash +$OBJDIR/dist/bin/rapl +``` + +### Linux + +On Linux, `rapl` can be run as root, as follows. + + sudo $OBJDIR/dist/bin/rapl + +Alternatively, it can be run without root privileges by setting the +contents of +[/proc/sys/kernel/perf_event_paranoid](http://unix.stackexchange.com/questions/14227/do-i-need-root-admin-permissions-to-run-userspace-perf-tool-perf-events-ar) +to 0. Note that if you do change this file, its contents may reset when +the machine is next rebooted. + +You must be running Linux kernel version 3.14 or later for `rapl` to +work. Otherwise, it will fail with an error message explaining this +requirement. + +### Windows + +Unfortunately, `rapl` does not work on Windows, and porting it would be +difficult because Windows does not have APIs that allow easy access to +the relevant model-specific registers. + +## Output + +The following is 10 seconds of output from a default invocation of +`rapl`. + +```bash + total W = _pkg_ (cores + _gpu_ + other) + _ram_ W +#01 5.17 W = 1.78 ( 0.12 + 0.10 + 1.56) + 3.39 W +#02 9.43 W = 5.44 ( 1.44 + 1.20 + 2.80) + 3.98 W +#03 14.26 W = 10.21 ( 5.47 + 0.19 + 4.55) + 4.04 W +#04 10.02 W = 6.15 ( 2.62 + 0.43 + 3.10) + 3.86 W +#05 14.63 W = 10.43 ( 4.41 + 0.81 + 5.22) + 4.19 W +#06 11.16 W = 6.90 ( 1.91 + 1.68 + 3.31) + 4.26 W +#07 5.40 W = 1.97 ( 0.20 + 0.10 + 1.67) + 3.44 W +#08 5.17 W = 1.76 ( 0.07 + 0.08 + 1.60) + 3.41 W +#09 5.17 W = 1.76 ( 0.09 + 0.08 + 1.58) + 3.42 W +#10 8.13 W = 4.40 ( 1.55 + 0.11 + 2.74) + 3.73 W +``` + +Things to note include the following. + +- All measurements are in Watts. +- The first line indicates the meaning of each column. +- The underscores in `_pkg_`, `_gpu_` and `_ram_` are present so that + each column's name has five characters. +- The total power is the sum of the package power and the RAM power. +- The package estimate is divided into three parts: cores, GPU, and + \"other\". \"Other\" is computed as the package power minus the + cores power and GPU power. +- If the processor does not support GPU or RAM estimates then + \"` n/a `\" will be printed in the relevant column instead of a + number, and it will contribute zero to the total. + +Once sampling is finished --- either because the user interrupted it, or +because the requested number of samples has been taken --- the following +summary data is shown: + +```bash +10 samples taken over a period of 10.000 seconds + +Distribution of 'total' values: + mean = 8.85 W + std dev = 3.50 W + 0th percentile = 5.17 W (min) + 5th percentile = 5.17 W + 25th percentile = 5.17 W + 50th percentile = 8.13 W + 75th percentile = 11.16 W + 95th percentile = 14.63 W +100th percentile = 14.63 W (max) +``` + +The distribution data is omitted if there was zero or one samples taken. + +## Options + +- `-i --sample-interval`. The length of each sample in milliseconds. + Defaults to 1000. A warning is given if you set it below 50 because + that is likely to lead to inaccurate estimates. +- `-n --sample-count`. The number of samples to take. The default is + 0, which is interpreted as \"unlimited\". + +## Combining with `powermetrics` + +On Mac, you can use the [mach power](powermetrics.md#mach-power) command +to run `rapl` in combination with `powermetrics` in a way that gives the +most useful summary measurements for each of Firefox, Chrome and Safari. -- cgit v1.2.3