From 6bf0a5cb5034a7e684dcc3500e841785237ce2dd Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 19:32:43 +0200 Subject: Adding upstream version 1:115.7.0. Signed-off-by: Daniel Baumann --- other-licenses/snappy/src/snappy-test.cc | 503 +++++++++++++++++++++++++++++++ 1 file changed, 503 insertions(+) create mode 100644 other-licenses/snappy/src/snappy-test.cc (limited to 'other-licenses/snappy/src/snappy-test.cc') diff --git a/other-licenses/snappy/src/snappy-test.cc b/other-licenses/snappy/src/snappy-test.cc new file mode 100644 index 0000000000..7eb490ac17 --- /dev/null +++ b/other-licenses/snappy/src/snappy-test.cc @@ -0,0 +1,503 @@ +// Copyright 2011 Google Inc. All Rights Reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are +// met: +// +// * Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// * Redistributions in binary form must reproduce the above +// copyright notice, this list of conditions and the following disclaimer +// in the documentation and/or other materials provided with the +// distribution. +// * Neither the name of Google Inc. nor the names of its +// contributors may be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +// Various stubs for the unit tests for the open-source version of Snappy. + +#include "snappy-test.h" + +#include +#include +#include +#include +#include +#include + +namespace file { + +OptionsStub::OptionsStub() = default; +OptionsStub::~OptionsStub() = default; + +const OptionsStub &Defaults() { + static OptionsStub defaults; + return defaults; +} + +StatusStub::StatusStub() = default; +StatusStub::StatusStub(const StatusStub &) = default; +StatusStub &StatusStub::operator=(const StatusStub &) = default; +StatusStub::~StatusStub() = default; + +bool StatusStub::ok() { return true; } + +StatusStub GetContents(const std::string &filename, std::string *output, + const OptionsStub & /* options */) { + std::FILE *fp = std::fopen(filename.c_str(), "rb"); + if (fp == nullptr) { + std::perror(filename.c_str()); + std::exit(1); + } + + output->clear(); + while (!std::feof(fp)) { + char buffer[4096]; + size_t bytes_read = std::fread(buffer, 1, sizeof(buffer), fp); + if (bytes_read == 0 && std::ferror(fp)) { + std::perror("fread"); + std::exit(1); + } + output->append(buffer, bytes_read); + } + + std::fclose(fp); + return StatusStub(); +} + +StatusStub SetContents(const std::string &file_name, const std::string &content, + const OptionsStub & /* options */) { + std::FILE *fp = std::fopen(file_name.c_str(), "wb"); + if (fp == nullptr) { + std::perror(file_name.c_str()); + std::exit(1); + } + + size_t bytes_written = std::fwrite(content.data(), 1, content.size(), fp); + if (bytes_written != content.size()) { + std::perror("fwrite"); + std::exit(1); + } + + std::fclose(fp); + return StatusStub(); +} + +} // namespace file + +namespace snappy { + +std::string ReadTestDataFile(const std::string& base, size_t size_limit) { + std::string contents; + const char* srcdir = getenv("srcdir"); // This is set by Automake. + std::string prefix; + if (srcdir) { + prefix = std::string(srcdir) + "/"; + } + file::GetContents(prefix + "testdata/" + base, &contents, file::Defaults() + ).ok(); + if (size_limit > 0) { + contents = contents.substr(0, size_limit); + } + return contents; +} + +std::string StrFormat(const char* format, ...) { + char buffer[4096]; + std::va_list ap; + va_start(ap, format); + std::vsnprintf(buffer, sizeof(buffer), format, ap); + va_end(ap); + return buffer; +} + +LogMessage::~LogMessage() { std::cerr << std::endl; } + +LogMessage &LogMessage::operator<<(const std::string &message) { + std::cerr << message; + return *this; +} + +LogMessage &LogMessage::operator<<(int number) { + std::cerr << number; + return *this; +} + +#ifdef _MSC_VER +// ~LogMessageCrash calls std::abort() and therefore never exits. This is by +// design, so temporarily disable warning C4722. +#pragma warning(push) +#pragma warning(disable : 4722) +#endif + +LogMessageCrash::~LogMessageCrash() { + std::cerr << std::endl; + std::abort(); +} + +#ifdef _MSC_VER +#pragma warning(pop) +#endif + +#ifdef HAVE_LIBZ + +ZLib::ZLib() + : comp_init_(false), + uncomp_init_(false) { + Reinit(); +} + +ZLib::~ZLib() { + if (comp_init_) { deflateEnd(&comp_stream_); } + if (uncomp_init_) { inflateEnd(&uncomp_stream_); } +} + +void ZLib::Reinit() { + compression_level_ = Z_DEFAULT_COMPRESSION; + window_bits_ = MAX_WBITS; + mem_level_ = 8; // DEF_MEM_LEVEL + if (comp_init_) { + deflateEnd(&comp_stream_); + comp_init_ = false; + } + if (uncomp_init_) { + inflateEnd(&uncomp_stream_); + uncomp_init_ = false; + } + first_chunk_ = true; +} + +void ZLib::Reset() { + first_chunk_ = true; +} + +// --------- COMPRESS MODE + +// Initialization method to be called if we hit an error while +// compressing. On hitting an error, call this method before returning +// the error. +void ZLib::CompressErrorInit() { + deflateEnd(&comp_stream_); + comp_init_ = false; + Reset(); +} + +int ZLib::DeflateInit() { + return deflateInit2(&comp_stream_, + compression_level_, + Z_DEFLATED, + window_bits_, + mem_level_, + Z_DEFAULT_STRATEGY); +} + +int ZLib::CompressInit(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen) { + int err; + + comp_stream_.next_in = (Bytef*)source; + comp_stream_.avail_in = (uInt)*sourceLen; + if ((uLong)comp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR; + comp_stream_.next_out = dest; + comp_stream_.avail_out = (uInt)*destLen; + if ((uLong)comp_stream_.avail_out != *destLen) return Z_BUF_ERROR; + + if ( !first_chunk_ ) // only need to set up stream the first time through + return Z_OK; + + if (comp_init_) { // we've already initted it + err = deflateReset(&comp_stream_); + if (err != Z_OK) { + LOG(WARNING) << "ERROR: Can't reset compress object; creating a new one"; + deflateEnd(&comp_stream_); + comp_init_ = false; + } + } + if (!comp_init_) { // first use + comp_stream_.zalloc = (alloc_func)0; + comp_stream_.zfree = (free_func)0; + comp_stream_.opaque = (voidpf)0; + err = DeflateInit(); + if (err != Z_OK) return err; + comp_init_ = true; + } + return Z_OK; +} + +// In a perfect world we'd always have the full buffer to compress +// when the time came, and we could just call Compress(). Alas, we +// want to do chunked compression on our webserver. In this +// application, we compress the header, send it off, then compress the +// results, send them off, then compress the footer. Thus we need to +// use the chunked compression features of zlib. +int ZLib::CompressAtMostOrAll(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen, + int flush_mode) { // Z_FULL_FLUSH or Z_FINISH + int err; + + if ( (err=CompressInit(dest, destLen, source, sourceLen)) != Z_OK ) + return err; + + // This is used to figure out how many bytes we wrote *this chunk* + int compressed_size = comp_stream_.total_out; + + // Some setup happens only for the first chunk we compress in a run + if ( first_chunk_ ) { + first_chunk_ = false; + } + + // flush_mode is Z_FINISH for all mode, Z_SYNC_FLUSH for incremental + // compression. + err = deflate(&comp_stream_, flush_mode); + + *sourceLen = comp_stream_.avail_in; + + if ((err == Z_STREAM_END || err == Z_OK) + && comp_stream_.avail_in == 0 + && comp_stream_.avail_out != 0 ) { + // we processed everything ok and the output buffer was large enough. + ; + } else if (err == Z_STREAM_END && comp_stream_.avail_in > 0) { + return Z_BUF_ERROR; // should never happen + } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) { + // an error happened + CompressErrorInit(); + return err; + } else if (comp_stream_.avail_out == 0) { // not enough space + err = Z_BUF_ERROR; + } + + assert(err == Z_OK || err == Z_STREAM_END || err == Z_BUF_ERROR); + if (err == Z_STREAM_END) + err = Z_OK; + + // update the crc and other metadata + compressed_size = comp_stream_.total_out - compressed_size; // delta + *destLen = compressed_size; + + return err; +} + +int ZLib::CompressChunkOrAll(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int flush_mode) { // Z_FULL_FLUSH or Z_FINISH + const int ret = + CompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode); + if (ret == Z_BUF_ERROR) + CompressErrorInit(); + return ret; +} + +// This routine only initializes the compression stream once. Thereafter, it +// just does a deflateReset on the stream, which should be faster. +int ZLib::Compress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen) { + int err; + if ( (err=CompressChunkOrAll(dest, destLen, source, sourceLen, + Z_FINISH)) != Z_OK ) + return err; + Reset(); // reset for next call to Compress + + return Z_OK; +} + + +// --------- UNCOMPRESS MODE + +int ZLib::InflateInit() { + return inflateInit2(&uncomp_stream_, MAX_WBITS); +} + +// Initialization method to be called if we hit an error while +// uncompressing. On hitting an error, call this method before +// returning the error. +void ZLib::UncompressErrorInit() { + inflateEnd(&uncomp_stream_); + uncomp_init_ = false; + Reset(); +} + +int ZLib::UncompressInit(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen) { + int err; + + uncomp_stream_.next_in = (Bytef*)source; + uncomp_stream_.avail_in = (uInt)*sourceLen; + // Check for source > 64K on 16-bit machine: + if ((uLong)uncomp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR; + + uncomp_stream_.next_out = dest; + uncomp_stream_.avail_out = (uInt)*destLen; + if ((uLong)uncomp_stream_.avail_out != *destLen) return Z_BUF_ERROR; + + if ( !first_chunk_ ) // only need to set up stream the first time through + return Z_OK; + + if (uncomp_init_) { // we've already initted it + err = inflateReset(&uncomp_stream_); + if (err != Z_OK) { + LOG(WARNING) + << "ERROR: Can't reset uncompress object; creating a new one"; + UncompressErrorInit(); + } + } + if (!uncomp_init_) { + uncomp_stream_.zalloc = (alloc_func)0; + uncomp_stream_.zfree = (free_func)0; + uncomp_stream_.opaque = (voidpf)0; + err = InflateInit(); + if (err != Z_OK) return err; + uncomp_init_ = true; + } + return Z_OK; +} + +// If you compressed your data a chunk at a time, with CompressChunk, +// you can uncompress it a chunk at a time with UncompressChunk. +// Only difference bewteen chunked and unchunked uncompression +// is the flush mode we use: Z_SYNC_FLUSH (chunked) or Z_FINISH (unchunked). +int ZLib::UncompressAtMostOrAll(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen, + int flush_mode) { // Z_SYNC_FLUSH or Z_FINISH + int err = Z_OK; + + if ( (err=UncompressInit(dest, destLen, source, sourceLen)) != Z_OK ) { + LOG(WARNING) << "UncompressInit: Error: " << err << " SourceLen: " + << *sourceLen; + return err; + } + + // This is used to figure out how many output bytes we wrote *this chunk*: + const uLong old_total_out = uncomp_stream_.total_out; + + // This is used to figure out how many input bytes we read *this chunk*: + const uLong old_total_in = uncomp_stream_.total_in; + + // Some setup happens only for the first chunk we compress in a run + if ( first_chunk_ ) { + first_chunk_ = false; // so we don't do this again + + // For the first chunk *only* (to avoid infinite troubles), we let + // there be no actual data to uncompress. This sometimes triggers + // when the input is only the gzip header, say. + if ( *sourceLen == 0 ) { + *destLen = 0; + return Z_OK; + } + } + + // We'll uncompress as much as we can. If we end OK great, otherwise + // if we get an error that seems to be the gzip footer, we store the + // gzip footer and return OK, otherwise we return the error. + + // flush_mode is Z_SYNC_FLUSH for chunked mode, Z_FINISH for all mode. + err = inflate(&uncomp_stream_, flush_mode); + + // Figure out how many bytes of the input zlib slurped up: + const uLong bytes_read = uncomp_stream_.total_in - old_total_in; + CHECK_LE(source + bytes_read, source + *sourceLen); + *sourceLen = uncomp_stream_.avail_in; + + if ((err == Z_STREAM_END || err == Z_OK) // everything went ok + && uncomp_stream_.avail_in == 0) { // and we read it all + ; + } else if (err == Z_STREAM_END && uncomp_stream_.avail_in > 0) { + LOG(WARNING) + << "UncompressChunkOrAll: Received some extra data, bytes total: " + << uncomp_stream_.avail_in << " bytes: " + << std::string(reinterpret_cast(uncomp_stream_.next_in), + std::min(int(uncomp_stream_.avail_in), 20)); + UncompressErrorInit(); + return Z_DATA_ERROR; // what's the extra data for? + } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) { + // an error happened + LOG(WARNING) << "UncompressChunkOrAll: Error: " << err + << " avail_out: " << uncomp_stream_.avail_out; + UncompressErrorInit(); + return err; + } else if (uncomp_stream_.avail_out == 0) { + err = Z_BUF_ERROR; + } + + assert(err == Z_OK || err == Z_BUF_ERROR || err == Z_STREAM_END); + if (err == Z_STREAM_END) + err = Z_OK; + + *destLen = uncomp_stream_.total_out - old_total_out; // size for this call + + return err; +} + +int ZLib::UncompressChunkOrAll(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int flush_mode) { // Z_SYNC_FLUSH or Z_FINISH + const int ret = + UncompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode); + if (ret == Z_BUF_ERROR) + UncompressErrorInit(); + return ret; +} + +int ZLib::UncompressAtMost(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen) { + return UncompressAtMostOrAll(dest, destLen, source, sourceLen, Z_SYNC_FLUSH); +} + +// We make sure we've uncompressed everything, that is, the current +// uncompress stream is at a compressed-buffer-EOF boundary. In gzip +// mode, we also check the gzip footer to make sure we pass the gzip +// consistency checks. We RETURN true iff both types of checks pass. +bool ZLib::UncompressChunkDone() { + assert(!first_chunk_ && uncomp_init_); + // Make sure we're at the end-of-compressed-data point. This means + // if we call inflate with Z_FINISH we won't consume any input or + // write any output + Bytef dummyin, dummyout; + uLongf dummylen = 0; + if ( UncompressChunkOrAll(&dummyout, &dummylen, &dummyin, 0, Z_FINISH) + != Z_OK ) { + return false; + } + + // Make sure that when we exit, we can start a new round of chunks later + Reset(); + + return true; +} + +// Uncompresses the source buffer into the destination buffer. +// The destination buffer must be long enough to hold the entire +// decompressed contents. +// +// We only initialize the uncomp_stream once. Thereafter, we use +// inflateReset, which should be faster. +// +// Returns Z_OK on success, otherwise, it returns a zlib error code. +int ZLib::Uncompress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen) { + int err; + if ( (err=UncompressChunkOrAll(dest, destLen, source, sourceLen, + Z_FINISH)) != Z_OK ) { + Reset(); // let us try to compress again + return err; + } + if ( !UncompressChunkDone() ) // calls Reset() + return Z_DATA_ERROR; + return Z_OK; // stream_end is ok +} + +#endif // HAVE_LIBZ + +} // namespace snappy -- cgit v1.2.3