/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "CTSerialization.h"
#include "CTUtils.h"

#include <stdint.h>
#include <type_traits>

namespace mozilla {
namespace ct {

using namespace mozilla::pkix;

typedef mozilla::pkix::Result Result;

// Note: length is always specified in bytes.
// Signed Certificate Timestamp (SCT) Version length
static const size_t kVersionLength = 1;

// Members of a V1 SCT
static const size_t kLogIdLength = 32;
static const size_t kTimestampLength = 8;
static const size_t kExtensionsLengthBytes = 2;
static const size_t kHashAlgorithmLength = 1;
static const size_t kSigAlgorithmLength = 1;
static const size_t kSignatureLengthBytes = 2;

// Members of the digitally-signed struct of a V1 SCT
static const size_t kSignatureTypeLength = 1;
static const size_t kLogEntryTypeLength = 2;
static const size_t kAsn1CertificateLengthBytes = 3;
static const size_t kTbsCertificateLengthBytes = 3;

static const size_t kSCTListLengthBytes = 2;
static const size_t kSerializedSCTLengthBytes = 2;

enum class SignatureType {
  CertificateTimestamp = 0,
  TreeHash = 1,
};

// Reads a serialized hash algorithm.
static Result ReadHashAlgorithm(Reader& in,
                                DigitallySigned::HashAlgorithm& out) {
  unsigned int value;
  Result rv = ReadUint<kHashAlgorithmLength>(in, value);
  if (rv != Success) {
    return rv;
  }
  DigitallySigned::HashAlgorithm algo =
      static_cast<DigitallySigned::HashAlgorithm>(value);
  switch (algo) {
    case DigitallySigned::HashAlgorithm::None:
    case DigitallySigned::HashAlgorithm::MD5:
    case DigitallySigned::HashAlgorithm::SHA1:
    case DigitallySigned::HashAlgorithm::SHA224:
    case DigitallySigned::HashAlgorithm::SHA256:
    case DigitallySigned::HashAlgorithm::SHA384:
    case DigitallySigned::HashAlgorithm::SHA512:
      out = algo;
      return Success;
  }
  return Result::ERROR_BAD_DER;
}

// Reads a serialized signature algorithm.
static Result ReadSignatureAlgorithm(Reader& in,
                                     DigitallySigned::SignatureAlgorithm& out) {
  unsigned int value;
  Result rv = ReadUint<kSigAlgorithmLength>(in, value);
  if (rv != Success) {
    return rv;
  }
  DigitallySigned::SignatureAlgorithm algo =
      static_cast<DigitallySigned::SignatureAlgorithm>(value);
  switch (algo) {
    case DigitallySigned::SignatureAlgorithm::Anonymous:
    case DigitallySigned::SignatureAlgorithm::RSA:
    case DigitallySigned::SignatureAlgorithm::DSA:
    case DigitallySigned::SignatureAlgorithm::ECDSA:
      out = algo;
      return Success;
  }
  return Result::ERROR_BAD_DER;
}

// Reads a serialized version enum.
static Result ReadVersion(Reader& in,
                          SignedCertificateTimestamp::Version& out) {
  unsigned int value;
  Result rv = ReadUint<kVersionLength>(in, value);
  if (rv != Success) {
    return rv;
  }
  SignedCertificateTimestamp::Version version =
      static_cast<SignedCertificateTimestamp::Version>(value);
  switch (version) {
    case SignedCertificateTimestamp::Version::V1:
      out = version;
      return Success;
  }
  return Result::ERROR_BAD_DER;
}

// Writes a TLS-encoded variable length unsigned integer to |output|.
// Note: range/overflow checks are not performed on the input parameters.
// |length| indicates the size (in bytes) of the integer to be written.
// |value| the value itself to be written.
static Result UncheckedWriteUint(size_t length, uint64_t value,
                                 Buffer& output) {
  output.reserve(length + output.size());
  for (; length > 0; --length) {
    uint8_t nextByte = (value >> ((length - 1) * 8)) & 0xFF;
    output.push_back(nextByte);
  }
  return Success;
}

// Performs sanity checks on T and calls UncheckedWriteUint.
template <size_t length, typename T>
static inline Result WriteUint(T value, Buffer& output) {
  static_assert(length <= 8, "At most 8 byte integers can be written");
  static_assert(sizeof(T) >= length, "T must be able to hold <length> bytes");
  if (std::is_signed<T>::value) {
    // We accept signed integer types assuming the actual value is non-negative.
    if (value < 0) {
      return Result::FATAL_ERROR_INVALID_ARGS;
    }
  }
  if (sizeof(T) > length) {
    // We allow the value variable to take more bytes than is written,
    // but the unwritten bytes must be zero.
    // Note: when "sizeof(T) == length" holds, "value >> (length * 8)" is
    // undefined since the shift is too big. On some compilers, this would
    // produce a warning even though the actual code is unreachable.
    if (value >> (length * 8 - 1) > 1) {
      return Result::FATAL_ERROR_INVALID_ARGS;
    }
  }
  return UncheckedWriteUint(length, static_cast<uint64_t>(value), output);
}

// Writes an array to |output| from |input|.
// Should be used in one of two cases:
// * The length of |input| has already been encoded into the |output| stream.
// * The length of |input| is fixed and the reader is expected to specify that
// length when reading.
// If the length of |input| is dynamic and data is expected to follow it,
// WriteVariableBytes must be used.
static void WriteEncodedBytes(Input input, Buffer& output) {
  output.insert(output.end(), input.UnsafeGetData(),
                input.UnsafeGetData() + input.GetLength());
}

// Same as above, but the source data is in a Buffer.
static void WriteEncodedBytes(const Buffer& source, Buffer& output) {
  output.insert(output.end(), source.begin(), source.end());
}

// A variable-length byte array is prefixed by its length when serialized.
// This writes the length prefix.
// |prefixLength| indicates the number of bytes needed to represent the length.
// |dataLength| is the length of the byte array following the prefix.
// Fails if |dataLength| is more than 2^|prefixLength| - 1.
template <size_t prefixLength>
static Result WriteVariableBytesPrefix(size_t dataLength, Buffer& output) {
  const size_t maxAllowedInputSize =
      static_cast<size_t>(((1 << (prefixLength * 8)) - 1));
  if (dataLength > maxAllowedInputSize) {
    return Result::FATAL_ERROR_INVALID_ARGS;
  }

  return WriteUint<prefixLength>(dataLength, output);
}

// Writes a variable-length array to |output|.
// |prefixLength| indicates the number of bytes needed to represent the length.
// |input| is the array itself.
// Fails if the size of |input| is more than 2^|prefixLength| - 1.
template <size_t prefixLength>
static Result WriteVariableBytes(Input input, Buffer& output) {
  Result rv = WriteVariableBytesPrefix<prefixLength>(input.GetLength(), output);
  if (rv != Success) {
    return rv;
  }
  WriteEncodedBytes(input, output);
  return Success;
}

// Same as above, but the source data is in a Buffer.
template <size_t prefixLength>
static Result WriteVariableBytes(const Buffer& source, Buffer& output) {
  Input input;
  Result rv = BufferToInput(source, input);
  if (rv != Success) {
    return rv;
  }
  return WriteVariableBytes<prefixLength>(input, output);
}

// Writes a LogEntry of type X.509 cert to |output|.
// |input| is the LogEntry containing the certificate.
static Result EncodeAsn1CertLogEntry(const LogEntry& entry, Buffer& output) {
  return WriteVariableBytes<kAsn1CertificateLengthBytes>(entry.leafCertificate,
                                                         output);
}

// Writes a LogEntry of type PreCertificate to |output|.
// |input| is the LogEntry containing the TBSCertificate and issuer key hash.
static Result EncodePrecertLogEntry(const LogEntry& entry, Buffer& output) {
  if (entry.issuerKeyHash.size() != kLogIdLength) {
    return Result::FATAL_ERROR_INVALID_ARGS;
  }
  WriteEncodedBytes(entry.issuerKeyHash, output);
  return WriteVariableBytes<kTbsCertificateLengthBytes>(entry.tbsCertificate,
                                                        output);
}

Result EncodeDigitallySigned(const DigitallySigned& data, Buffer& output) {
  Result rv = WriteUint<kHashAlgorithmLength>(
      static_cast<unsigned int>(data.hashAlgorithm), output);
  if (rv != Success) {
    return rv;
  }
  rv = WriteUint<kSigAlgorithmLength>(
      static_cast<unsigned int>(data.signatureAlgorithm), output);
  if (rv != Success) {
    return rv;
  }
  return WriteVariableBytes<kSignatureLengthBytes>(data.signatureData, output);
}

Result DecodeDigitallySigned(Reader& reader, DigitallySigned& output) {
  DigitallySigned result;

  Result rv = ReadHashAlgorithm(reader, result.hashAlgorithm);
  if (rv != Success) {
    return rv;
  }
  rv = ReadSignatureAlgorithm(reader, result.signatureAlgorithm);
  if (rv != Success) {
    return rv;
  }

  Input signatureData;
  rv = ReadVariableBytes<kSignatureLengthBytes>(reader, signatureData);
  if (rv != Success) {
    return rv;
  }
  InputToBuffer(signatureData, result.signatureData);

  output = std::move(result);
  return Success;
}

Result EncodeLogEntry(const LogEntry& entry, Buffer& output) {
  Result rv = WriteUint<kLogEntryTypeLength>(
      static_cast<unsigned int>(entry.type), output);
  if (rv != Success) {
    return rv;
  }
  switch (entry.type) {
    case LogEntry::Type::X509:
      return EncodeAsn1CertLogEntry(entry, output);
    case LogEntry::Type::Precert:
      return EncodePrecertLogEntry(entry, output);
    default:
      assert(false);
  }
  return Result::ERROR_BAD_DER;
}

static Result WriteTimeSinceEpoch(uint64_t timestamp, Buffer& output) {
  return WriteUint<kTimestampLength>(timestamp, output);
}

Result EncodeV1SCTSignedData(uint64_t timestamp, Input serializedLogEntry,
                             Input extensions, Buffer& output) {
  Result rv = WriteUint<kVersionLength>(
      static_cast<unsigned int>(SignedCertificateTimestamp::Version::V1),
      output);
  if (rv != Success) {
    return rv;
  }
  rv = WriteUint<kSignatureTypeLength>(
      static_cast<unsigned int>(SignatureType::CertificateTimestamp), output);
  if (rv != Success) {
    return rv;
  }
  rv = WriteTimeSinceEpoch(timestamp, output);
  if (rv != Success) {
    return rv;
  }
  // NOTE: serializedLogEntry must already be serialized and contain the
  // length as the prefix.
  WriteEncodedBytes(serializedLogEntry, output);
  return WriteVariableBytes<kExtensionsLengthBytes>(extensions, output);
}

Result DecodeSCTList(Input input, Reader& listReader) {
  Reader inputReader(input);
  Input listData;
  Result rv = ReadVariableBytes<kSCTListLengthBytes>(inputReader, listData);
  if (rv != Success) {
    return rv;
  }
  return listReader.Init(listData);
}

Result ReadSCTListItem(Reader& listReader, Input& output) {
  if (listReader.AtEnd()) {
    return Result::FATAL_ERROR_INVALID_ARGS;
  }

  Result rv = ReadVariableBytes<kSerializedSCTLengthBytes>(listReader, output);
  if (rv != Success) {
    return rv;
  }
  if (output.GetLength() == 0) {
    return Result::ERROR_BAD_DER;
  }
  return Success;
}

Result DecodeSignedCertificateTimestamp(Reader& reader,
                                        SignedCertificateTimestamp& output) {
  SignedCertificateTimestamp result;

  Result rv = ReadVersion(reader, result.version);
  if (rv != Success) {
    return rv;
  }

  uint64_t timestamp;
  Input logId;
  Input extensions;

  rv = ReadFixedBytes(kLogIdLength, reader, logId);
  if (rv != Success) {
    return rv;
  }
  rv = ReadUint<kTimestampLength>(reader, timestamp);
  if (rv != Success) {
    return rv;
  }
  rv = ReadVariableBytes<kExtensionsLengthBytes>(reader, extensions);
  if (rv != Success) {
    return rv;
  }
  rv = DecodeDigitallySigned(reader, result.signature);
  if (rv != Success) {
    return rv;
  }

  InputToBuffer(logId, result.logId);
  InputToBuffer(extensions, result.extensions);
  result.timestamp = timestamp;

  output = std::move(result);
  return Success;
}

Result EncodeSCTList(const std::vector<pkix::Input>& scts, Buffer& output) {
  // Find out the total size of the SCT list to be written so we can
  // write the prefix for the list before writing its contents.
  size_t sctListLength = 0;
  for (auto& sct : scts) {
    sctListLength +=
        /* data size */ sct.GetLength() +
        /* length prefix size */ kSerializedSCTLengthBytes;
  }

  output.reserve(kSCTListLengthBytes + sctListLength);

  // Write the prefix for the SCT list.
  Result rv =
      WriteVariableBytesPrefix<kSCTListLengthBytes>(sctListLength, output);
  if (rv != Success) {
    return rv;
  }
  // Now write each SCT from the list.
  for (auto& sct : scts) {
    rv = WriteVariableBytes<kSerializedSCTLengthBytes>(sct, output);
    if (rv != Success) {
      return rv;
    }
  }
  return Success;
}

}  // namespace ct
}  // namespace mozilla