//po4a: entry man manual
////
Copyright (c) 1980, 1989, 1991 The Regents of the University of California.
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software
   must display the following acknowledgement:
This product includes software developed by the University of
California, Berkeley and its contributors.
4. Neither the name of the University nor the names of its contributors
   may be used to endorse or promote products derived from this software
   without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

    @(#)fstab.5	6.5 (Berkeley) 5/10/91
////
= fstab(5)
:doctype: manpage
:man manual: File formats
:man source: util-linux {release-version}
:page-layout: base
:configfile: fstab

== NAME

fstab - static information about the filesystems

== SYNOPSIS

_/etc/fstab_

== DESCRIPTION

The file *fstab* contains descriptive information about the filesystems the system can mount. *fstab* is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. The order of records in *fstab* is important because *fsck*(8), *mount*(8), and *umount*(8) sequentially iterate through *fstab* doing their thing.

Each filesystem is described on a separate line. Fields on each line are separated by tabs or spaces. Lines starting with '#' are comments. Blank lines are ignored.

The following is a typical example of an *fstab* entry:

....
LABEL=t-home2   /home      ext4    defaults,auto_da_alloc      0  2
....

=== The first field (_fs_spec_).

This field describes the block special device, remote filesystem or filesystem image for loop device to be mounted or swap file or swap partition to be enabled.

For ordinary mounts, it will hold (a link to) a block special device node (as created by *mknod*(2)) for the device to be mounted, like _/dev/cdrom_ or _/dev/sdb7_. For NFS mounts, this field is _<host>:<dir>_, e.g., _knuth.aeb.nl:/_. For filesystems with no storage, any string can be used, and will show up in *df*(1) output, for example. Typical usage is _proc_ for *procfs*; _mem_, _none_, or _tmpfs_ for *tmpfs*. Other special filesystems, like *udev* and *sysfs*, are typically not listed in *fstab*.

LABEL=<label> or UUID=<uuid> may be given instead of a device name. This is the recommended method, as device names are often a coincidence of hardware detection order, and can change when other disks are added or removed. For example, 'LABEL=Boot' or 'UUID=3e6be9de-8139-11d1-9106-a43f08d823a6'. (Use a filesystem-specific tool like *e2label*(8), *xfs_admin*(8), or *fatlabel*(8) to set LABELs on filesystems).

It's also possible to use *PARTUUID=* and *PARTLABEL=*. These partitions identifiers are supported for example for GUID Partition Table (GPT).

See *mount*(8), *blkid*(8) or *lsblk*(8) for more details about device identifiers.

Note that *mount*(8) uses UUIDs as strings. The string representation of the UUID should be based on lower case characters. But when specifying the volume ID of FAT or NTFS file systems upper case characters are used (e.g UUID="A40D-85E7" or UUID="61DB7756DB7779B3").

=== The second field (_fs_file_).

This field describes the mount point (target) for the filesystem. For swap partitions, this field should be specified as `none'. If the name of the mount point contains spaces or tabs these can be escaped as `\040' and '\011' respectively.

=== The third field (_fs_vfstype_).

This field describes the type of the filesystem. Linux supports many filesystem types: ext4, xfs, btrfs, f2fs, vfat, ntfs, hfsplus, tmpfs, sysfs, proc, iso9660, udf, squashfs, nfs, cifs, and many more. For more details, see *mount*(8).

An entry _swap_ denotes a file or partition to be used for swapping, cf. *swapon*(8). An entry _none_ is useful for bind or move mounts.

More than one type may be specified in a comma-separated list.

*mount*(8) and *umount*(8) support filesystem _subtypes_. The subtype is defined by '.subtype' suffix. For example 'fuse.sshfs'. It's recommended to use subtype notation rather than add any prefix to the first fstab field (for example 'sshfs#example.com' is deprecated).

=== The fourth field (_fs_mntops_).

This field describes the mount options associated with the filesystem.

It is formatted as a comma-separated list of options. It contains at least the type of mount (*ro* or *rw*), plus any additional options appropriate to the filesystem type (including performance-tuning options). For details, see *mount*(8) or *swapon*(8).

Basic filesystem-independent options are:

*defaults*::
use default options: rw, suid, dev, exec, auto, nouser, and async.
*noauto*::
do not mount when *mount -a* is given (e.g., at boot time)
*user*::
allow a user to mount
*owner*::
allow device owner to mount
*comment*::
or *x-<name>* for use by fstab-maintaining programs
*nofail*::
do not report errors for this device if it does not exist.

=== The fifth field (_fs_freq_).

This field is used by *dump*(8) to determine which filesystems need to be dumped. Defaults to zero (don't dump) if not present.

=== The sixth field (_fs_passno_).

This field is used by *fsck*(8) to determine the order in which filesystem checks are done at boot time. The root filesystem should be specified with a _fs_passno_ of 1. Other filesystems should have a _fs_passno_ of 2. Filesystems within a drive will be checked sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the hardware. Defaults to zero (don't check the filesystem) if not present.

== FILES

_/etc/fstab_,
_<fstab.h>_

== NOTES

The proper way to read records from *fstab* is to use the routines *getmntent*(3) or *libmount*.

The keyword *ignore* as a filesystem type (3rd field) is no longer supported by the pure libmount based mount utility (since util-linux v2.22).

== HISTORY

The ancestor of this *fstab* file format appeared in 4.0BSD.

== SEE ALSO

*getmntent*(3),
*fs*(5),
*findmnt*(8),
*mount*(8),
*swapon*(8)

include::man-common/bugreports.adoc[]

include::man-common/footer-config.adoc[]

ifdef::translation[]
include::man-common/translation.adoc[]
endif::[]