Adding upstream version 2:9.0.1378.upstream/2%9.0.1378upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1301 insertions, 0 deletions

diff --git a/runtime/doc/cmdline.txt b/runtime/doc/cmdline.txt
new file mode 100644
index 0000000..55b1a63
--- /dev/null
+++ b/runtime/doc/cmdline.txt
@@ -0,0 +1,1301 @@
+*cmdline.txt*   For Vim version 9.0.  Last change: 2023 Feb 08
+
+
+		  VIM REFERENCE MANUAL    by Bram Moolenaar
+
+
+				*Cmdline-mode* *Command-line-mode*
+Command-line mode		*Cmdline* *Command-line* *mode-cmdline* *:*
+
+Command-line mode is used to enter Ex commands (":"), search patterns
+("/" and "?"), and filter commands ("!").
+
+Basic command line editing is explained in chapter 20 of the user manual
+|usr_20.txt|.
+
+1. Command-line editing		|cmdline-editing|
+2. Command-line completion	|cmdline-completion|
+3. Ex command-lines		|cmdline-lines|
+4. Ex command-line ranges	|cmdline-ranges|
+5. Ex command-line flags	|ex-flags|
+6. Ex special characters	|cmdline-special|
+7. Command-line window		|cmdline-window|
+
+==============================================================================
+1. Command-line editing					*cmdline-editing*
+
+Normally characters are inserted in front of the cursor position.  You can
+move around in the command-line with the left and right cursor keys.  With the
+<Insert> key, you can toggle between inserting and overstriking characters.
+
+Note that if your keyboard does not have working cursor keys or any of the
+other special keys, you can use ":cnoremap" to define another key for them.
+For example, to define tcsh style editing keys:		*tcsh-style*  >
+	:cnoremap <C-A> <Home>
+	:cnoremap <C-F> <Right>
+	:cnoremap <C-B> <Left>
+	:cnoremap <Esc>b <S-Left>
+	:cnoremap <Esc>f <S-Right>
+(<> notation |<>|; type all this literally)
+
+							*cmdline-too-long*
+When the command line is getting longer than what fits on the screen, only the
+part that fits will be shown.  The cursor can only move in this visible part,
+thus you cannot edit beyond that.
+
+						*cmdline-history* *history*
+The command-lines that you enter are remembered in a history table.  You can
+recall them with the up and down cursor keys.  There are actually five
+history tables:
+- one for ':' commands
+- one for search strings
+- one for expressions
+- one for input lines, typed for the |input()| function.
+- one for debug mode commands
+These are completely separate.  Each history can only be accessed when
+entering the same type of line.
+Use the 'history' option to set the number of lines that are remembered
+(default: 50).
+Notes:
+- When you enter a command-line that is exactly the same as an older one, the
+  old one is removed (to avoid repeated commands moving older commands out of
+  the history).
+- Only commands that are typed are remembered.  Ones that completely come from
+  mappings are not put in the history.
+- All searches are put in the search history, including the ones that come
+  from commands like "*" and "#".  But for a mapping, only the last search is
+  remembered (to avoid that long mappings trash the history).
+{not available when compiled without the |+cmdline_hist| feature}
+
+There is an automatic completion of names on the command-line; see
+|cmdline-completion|.
+
+							*c_CTRL-V*
+CTRL-V		Insert next non-digit literally.  Up to three digits form the
+		decimal value of a single byte.  The non-digit and the three
+		digits are not considered for mapping.  This works the same
+		way as in Insert mode (see above, |i_CTRL-V|).
+		Note: Under MS-Windows CTRL-V is often mapped to paste text.
+		Use CTRL-Q instead then.
+		When |modifyOtherKeys| is enabled then special Escape sequence
+		is converted back to what it was without |modifyOtherKeys|,
+		unless the Shift key is also pressed.
+							*c_CTRL-Q*
+CTRL-Q		Same as CTRL-V.  But with some terminals it is used for
+		control flow, it doesn't work then.
+
+CTRL-SHIFT-V				*c_CTRL-SHIFT-V* *c_CTRL-SHIFT-Q*
+CTRL-SHIFT-Q	Works just like CTRL-V, unless |modifyOtherKeys| is active,
+		then it inserts the Escape sequence for a key with modifiers.
+		In the GUI the |key-notation| is inserted without simplifying.
+
+							*c_<Left>* *c_Left*
+<Left>		cursor left
+							*c_<Right>* *c_Right*
+<Right>		cursor right
+							*c_<S-Left>*
+<S-Left> or <C-Left>					*c_<C-Left>*
+		cursor one WORD left
+							*c_<S-Right>*
+<S-Right> or <C-Right>					*c_<C-Right>*
+		cursor one WORD right
+CTRL-B or <Home>				*c_CTRL-B* *c_<Home>* *c_Home*
+		cursor to beginning of command-line
+CTRL-E or <End>					*c_CTRL-E* *c_<End>* *c_End*
+		cursor to end of command-line
+
+							*c_<LeftMouse>*
+<LeftMouse>	Move the cursor to the position of the mouse click.
+
+							*c_<MiddleMouse>*
+<MiddleMouse>	Paste the contents of the clipboard (for X11 the primary
+		selection).  This is similar to using CTRL-R *, but no CR
+		characters are inserted between lines.
+
+CTRL-H						*c_<BS>* *c_CTRL-H* *c_BS*
+<BS>		Delete the character in front of the cursor (see |:fixdel| if
+		your <BS> key does not do what you want).
+							*c_<Del>* *c_Del*
+<Del>		Delete the character under the cursor (at end of line:
+		character before the cursor) (see |:fixdel| if your <Del>
+		key does not do what you want).
+							*c_CTRL-W*
+CTRL-W		Delete the |word| before the cursor.  This depends on the
+		'iskeyword' option.
+							*c_CTRL-U*
+CTRL-U		Remove all characters between the cursor position and
+		the beginning of the line.  Previous versions of vim
+		deleted all characters on the line.  If that is the
+		preferred behavior, add the following to your .vimrc: >
+			:cnoremap <C-U> <C-E><C-U>
+<
+						*c_<Insert>* *c_Insert*
+<Insert>	Toggle between insert and overstrike.
+
+{char1} <BS> {char2}	or				*c_digraph*
+CTRL-K {char1} {char2}					*c_CTRL-K*
+		enter digraph (see |digraphs|).  When {char1} is a special
+		key, the code for that key is inserted in <> form.
+
+CTRL-R {register}					*c_CTRL-R* *c_<C-R>*
+		Insert the contents of a numbered or named register.  Between
+		typing CTRL-R and the second character '"' will be displayed
+		to indicate that you are expected to enter the name of a
+		register.
+		The text is inserted as if you typed it, but mappings and
+		abbreviations are not used.  Command-line completion through
+		'wildchar' is not triggered though.  And characters that end
+		the command line are inserted literally (<Esc>, <CR>, <NL>,
+		<C-C>).  A <BS> or CTRL-W could still end the command line
+		though, and remaining characters will then be interpreted in
+		another mode, which might not be what you intended.
+		Special registers:
+			'"'	the unnamed register, containing the text of
+				the last delete or yank
+			'%'	the current file name
+			'#'	the alternate file name
+			'*'	the clipboard contents (X11: primary selection)
+			'+'	the clipboard contents
+			'/'	the last search pattern
+			':'	the last command-line
+			'-'	the last small (less than a line) delete
+			'.'	the last inserted text
+							*c_CTRL-R_=*
+			'='	the expression register: you are prompted to
+				enter an expression (see |expression|)
+				(doesn't work at the expression prompt; some
+				things such as changing the buffer or current
+				window are not allowed to avoid side effects)
+				When the result is a |List| the items are used
+				as lines.  They can have line breaks inside
+				too.
+				When the result is a Float it's automatically
+				converted to a String.
+				Note that when you only want to move the
+				cursor and not insert anything, you must make
+				sure the expression evaluates to an empty
+				string.  E.g.: >
+					<C-R><C-R>=setcmdpos(2)[-1]<CR>
+<		See |registers| about registers.
+		Implementation detail: When using the |expression| register
+		and invoking setcmdpos(), this sets the position before
+		inserting the resulting string.  Use CTRL-R CTRL-R to set the
+		position afterwards.
+
+CTRL-R CTRL-F				*c_CTRL-R_CTRL-F* *c_<C-R>_<C-F>*
+CTRL-R CTRL-P				*c_CTRL-R_CTRL-P* *c_<C-R>_<C-P>*
+CTRL-R CTRL-W				*c_CTRL-R_CTRL-W* *c_<C-R>_<C-W>*
+CTRL-R CTRL-A				*c_CTRL-R_CTRL-A* *c_<C-R>_<C-A>*
+CTRL-R CTRL-L				*c_CTRL-R_CTRL-L* *c_<C-R>_<C-L>*
+		Insert the object under the cursor:
+			CTRL-F	the Filename under the cursor
+			CTRL-P	the Filename under the cursor, expanded with
+				'path' as in |gf|
+			CTRL-W	the Word under the cursor
+			CTRL-A	the WORD under the cursor; see |WORD|
+			CTRL-L	the line under the cursor
+
+		When 'incsearch' is set the cursor position at the end of the
+		currently displayed match is used.  With CTRL-W the part of
+		the word that was already typed is not inserted again.
+
+					*c_CTRL-R_CTRL-R* *c_<C-R>_<C-R>*
+					*c_CTRL-R_CTRL-O* *c_<C-R>_<C-O>*
+CTRL-R CTRL-R {register CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
+CTRL-R CTRL-O {register CTRL-F CTRL-P CTRL-W CTRL-A CTRL-L}
+		Insert register or object under the cursor.  Works like
+		|c_CTRL-R| but inserts the text literally.  For example, if
+		register a contains "xy^Hz" (where ^H is a backspace),
+		"CTRL-R a" will insert "xz" while "CTRL-R CTRL-R a" will
+		insert "xy^Hz".
+
+CTRL-\ e {expr}						*c_CTRL-\_e*
+		Evaluate {expr} and replace the whole command line with the
+		result.  You will be prompted for the expression, type <Enter>
+		to finish it.  It's most useful in mappings though.  See
+		|expression|.
+		See |c_CTRL-R_=| for inserting the result of an expression.
+		Useful functions are |getcmdtype()|, |getcmdline()| and
+		|getcmdpos()|.
+		The cursor position is unchanged, except when the cursor was
+		at the end of the line, then it stays at the end.
+		|setcmdpos()| can be used to set the cursor position.
+		The |sandbox| is used for evaluating the expression to avoid
+		nasty side effects.
+		Example: >
+			:cmap <F7> <C-\>eAppendSome()<CR>
+			:func AppendSome()
+			   :let cmd = getcmdline() .. " Some()"
+			   :" place the cursor on the )
+			   :call setcmdpos(strlen(cmd))
+			   :return cmd
+			:endfunc
+<		This doesn't work recursively, thus not when already editing
+		an expression.  But it is possible to use in a mapping.
+
+							*c_CTRL-Y*
+CTRL-Y		When there is a modeless selection, copy the selection into
+		the clipboard. |modeless-selection|
+		If there is no selection CTRL-Y is inserted as a character.
+
+CTRL-M or CTRL-J		*c_CTRL-M* *c_CTRL-J* *c_<NL>* *c_<CR>* *c_CR*
+<CR> or <NL>	start entered command
+
+CTRL-[						*c_CTRL-[* *c_<Esc>* *c_Esc*
+<Esc>		When typed and 'x' not present in 'cpoptions', quit
+		Command-line mode without executing.  In macros or when 'x'
+		present in 'cpoptions', start entered command.
+		Note: If your <Esc> key is hard to hit on your keyboard, train
+		yourself to use CTRL-[.
+							*c_CTRL-C*
+CTRL-C		quit command-line without executing
+
+							*c_<Up>* *c_Up*
+<Up>		recall older command-line from history, whose beginning
+		matches the current command-line (see below).
+		{not available when compiled without the |+cmdline_hist|
+		feature}
+							*c_<Down>* *c_Down*
+<Down>		recall more recent command-line from history, whose beginning
+		matches the current command-line (see below).
+		{not available when compiled without the |+cmdline_hist|
+		feature}
+
+							*c_<S-Up>* *c_<PageUp>*
+<S-Up> or <PageUp>
+		recall older command-line from history
+		{not available when compiled without the |+cmdline_hist|
+		feature}
+						*c_<S-Down>* *c_<PageDown>*
+<S-Down> or <PageDown>
+		recall more recent command-line from history
+		{not available when compiled without the |+cmdline_hist|
+		feature}
+
+CTRL-D		command-line completion (see |cmdline-completion|)
+'wildchar' option
+		command-line completion (see |cmdline-completion|)
+CTRL-N		command-line completion (see |cmdline-completion|)
+CTRL-P		command-line completion (see |cmdline-completion|)
+CTRL-A		command-line completion (see |cmdline-completion|)
+CTRL-L		command-line completion (see |cmdline-completion|)
+
+							*c_CTRL-_*
+CTRL-_		a - switch between Hebrew and English keyboard mode, which is
+		private to the command-line and not related to hkmap.
+		This is useful when Hebrew text entry is required in the
+		command-line, searches, abbreviations, etc.  Applies only if
+		Vim is compiled with the |+rightleft| feature and the
+		'allowrevins' option is set.
+		See |rileft.txt|.
+
+		b - switch between Farsi and English keyboard mode, which is
+		private to the command-line and not related to fkmap.  In
+		Farsi keyboard mode the characters are inserted in reverse
+		insert manner.  This is useful when Farsi text entry is
+		required in the command-line, searches, abbreviations, etc.
+		Applies only if Vim is compiled with the |+farsi| feature.
+		See |farsi.txt|.
+
+							*c_CTRL-^*
+CTRL-^		Toggle the use of language |:lmap| mappings and/or Input
+		Method.
+		When typing a pattern for a search command and 'imsearch' is
+		not -1, VAL is the value of 'imsearch', otherwise VAL is the
+		value of 'iminsert'.
+		When language mappings are defined:
+		- If VAL is 1 (langmap mappings used) it becomes 0 (no langmap
+		  mappings used).
+		- If VAL was not 1 it becomes 1, thus langmap mappings are
+		  enabled.
+		When no language mappings are defined:
+		- If VAL is 2 (Input Method is used) it becomes 0 (no input
+		  method used)
+		- If VAL has another value it becomes 2, thus the Input Method
+		  is enabled.
+		These language mappings are normally used to type characters
+		that are different from what the keyboard produces.  The
+		'keymap' option can be used to install a whole number of them.
+		When entering a command line, langmap mappings are switched
+		off, since you are expected to type a command.  After
+		switching it on with CTRL-^, the new state is not used again
+		for the next command or Search pattern.
+
+						*c_CTRL-]*
+CTRL-]		Trigger abbreviation, without inserting a character.
+
+For Emacs-style editing on the command-line see |emacs-keys|.
+
+The <Up> and <Down> keys take the current command-line as a search string.
+The beginning of the next/previous command-lines are compared with this
+string.  The first line that matches is the new command-line.  When typing
+these two keys repeatedly, the same string is used again.  For example, this
+can be used to find the previous substitute command: Type ":s" and then <Up>.
+The same could be done by typing <S-Up> a number of times until the desired
+command-line is shown.  (Note: the shifted arrow keys do not work on all
+terminals)
+
+							*:his* *:history*
+:his[tory]	Print the history of last entered commands.
+		{not available when compiled without the |+cmdline_hist|
+		feature}
+
+:his[tory] [{name}] [{first}][, [{last}]]
+		List the contents of history {name} which can be:
+		c[md]	 or :		command-line history
+		s[earch] or / or ?	search string history
+		e[xpr]	 or =		expression register history
+		i[nput]	 or @		input line history
+		d[ebug]	 or >		debug command history
+		a[ll]			all of the above
+
+		If the numbers {first} and/or {last} are given, the respective
+		range of entries from a history is listed.  These numbers can
+		be specified in the following form:
+							*:history-indexing*
+		A positive number represents the absolute index of an entry
+		as it is given in the first column of a :history listing.
+		This number remains fixed even if other entries are deleted.
+
+		A negative number means the relative position of an entry,
+		counted from the newest entry (which has index -1) backwards.
+
+		Examples:
+		List entries 6 to 12 from the search history: >
+			:history / 6,12
+<
+		List the penultimate entry from all histories: >
+			:history all -2
+<
+		List the most recent two entries from all histories: >
+			:history all -2,
+
+:keepp[atterns] {command}			*:keepp* *:keeppatterns*
+		Execute {command}, without adding anything to the search
+		history
+
+==============================================================================
+2. Command-line completion				*cmdline-completion*
+
+When editing the command-line, a few commands can be used to complete the
+word before the cursor.  This is available for:
+
+- Command names: At the start of the command-line.
+- Tags: Only after the ":tag" command.
+- File names: Only after a command that accepts a file name or a setting for
+  an option that can be set to a file name.  This is called file name
+  completion.
+- Shell command names: After ":!cmd", ":r !cmd" and ":w !cmd".  $PATH is used.
+- Options: Only after the ":set" command.
+- Mappings: Only after a ":map" or similar command.
+- Variable and function names: Only after a ":if", ":call" or similar command.
+
+The number of help item matches is limited (currently to 300) to avoid a long
+delay when there are very many matches.
+
+These are the commands that can be used:
+
+							*c_CTRL-D*
+CTRL-D		List names that match the pattern in front of the cursor.
+		When showing file names, directories are highlighted (see
+		'highlight' option).  Names where 'suffixes' matches are moved
+		to the end.
+		The 'wildoptions' option can be set to "tagfile" to list the
+		file of matching tags.
+					*c_CTRL-I* *c_wildchar* *c_<Tab>*
+'wildchar' option
+		A match is done on the pattern in front of the cursor.  The
+		match (if there are several, the first match) is inserted
+		in place of the pattern.  (Note: does not work inside a
+		macro, because <Tab> or <Esc> are mostly used as 'wildchar',
+		and these have a special meaning in some macros.) When typed
+		again and there were multiple matches, the next
+		match is inserted.  After the last match, the first is used
+		again (wrap around).
+		The behavior can be changed with the 'wildmode' option.
+							*c_<S-Tab>*
+<S-Tab>		Like 'wildchar' or <Tab>, but begin with the last match and
+		then go to the previous match.
+		<S-Tab> does not work everywhere.
+							*c_CTRL-N*
+CTRL-N		After using 'wildchar' which got multiple matches, go to next
+		match.  Otherwise recall more recent command-line from history.
+							*c_CTRL-P*
+CTRL-P		After using 'wildchar' which got multiple matches, go to
+		previous match.  Otherwise recall older command-line from
+		history.
+							*c_CTRL-A*
+CTRL-A		All names that match the pattern in front of the cursor are
+		inserted.
+							*c_CTRL-L*
+CTRL-L		A match is done on the pattern in front of the cursor.  If
+		there is one match, it is inserted in place of the pattern.
+		If there are multiple matches the longest common part is
+		inserted in place of the pattern.  If the result is shorter
+		than the pattern, no completion is done.
+							*/_CTRL-L*
+		When 'incsearch' is set, entering a search pattern for "/" or
+		"?" and the current match is displayed then CTRL-L will add
+		one character from the end of the current match.  If
+		'ignorecase' and 'smartcase' are set and the command line has
+		no uppercase characters, the added character is converted to
+		lowercase.
+	                                            *c_CTRL-G* */_CTRL-G*
+CTRL-G		When 'incsearch' is set, entering a search pattern for "/" or
+		"?" and the current match is displayed then CTRL-G will move
+		to the next match (does not take |search-offset| into account)
+		Use CTRL-T to move to the previous match.  Hint: on a regular
+		keyboard T is above G.
+	                                            *c_CTRL-T* */_CTRL-T*
+CTRL-T		When 'incsearch' is set, entering a search pattern for "/" or
+		"?" and the current match is displayed then CTRL-T will move
+		to the previous match (does not take |search-offset| into
+		account).
+		Use CTRL-G to move to the next match.  Hint: on a regular
+		keyboard T is above G.
+
+The 'wildchar' option defaults to <Tab> (CTRL-E when in Vi compatible mode; in
+a previous version <Esc> was used).  In the pattern standard wildcards '*' and
+'?' are accepted when matching file names.  '*' matches any string, '?'
+matches exactly one character.
+
+When repeating 'wildchar' or CTRL-N you cycle through the matches, eventually
+ending up back to what was typed.  If the first match is not what you wanted,
+you can use <S-Tab> or CTRL-P to go straight back to what you typed.
+
+The 'wildignorecase' option can be set to ignore case in filenames.
+
+The 'wildmenu' option can be set to show the matches just above the command
+line.
+
+If you like tcsh's autolist completion, you can use this mapping:
+	:cnoremap X <C-L><C-D>
+(Where X is the command key to use, <C-L> is CTRL-L and <C-D> is CTRL-D)
+This will find the longest match and then list all matching files.
+
+If you like tcsh's autolist completion, you can use the 'wildmode' option to
+emulate it.  For example, this mimics autolist=ambiguous:
+	:set wildmode=longest,list
+This will find the longest match with the first 'wildchar', then list all
+matching files with the next.
+
+					*complete-script-local-functions*
+When completing user function names, prepend "s:" to find script-local
+functions.
+
+							*suffixes*
+For file name completion you can use the 'suffixes' option to set a priority
+between files with almost the same name.  If there are multiple matches,
+those files with an extension that is in the 'suffixes' option are ignored.
+The default is ".bak,~,.o,.h,.info,.swp,.obj", which means that files ending
+in ".bak", "~", ".o", ".h", ".info", ".swp" and ".obj" are sometimes ignored.
+
+An empty entry, two consecutive commas, match a file name that does not
+contain a ".", thus has no suffix.  This is useful to ignore "prog" and prefer
+"prog.c".
+
+Examples:
+
+  pattern:	files:				match:	~
+   test*	test.c test.h test.o		test.c
+   test*	test.h test.o			test.h and test.o
+   test*	test.i test.h test.c		test.i and test.c
+
+It is impossible to ignore suffixes with two dots.
+
+If there is more than one matching file (after ignoring the ones matching
+the 'suffixes' option) the first file name is inserted.  You can see that
+there is only one match when you type 'wildchar' twice and the completed
+match stays the same.  You can get to the other matches by entering
+'wildchar', CTRL-N or CTRL-P.  All files are included, also the ones with
+extensions matching the 'suffixes' option.
+
+To completely ignore files with some extension use 'wildignore'.
+
+To match only files that end at the end of the typed text append a "$".  For
+example, to match only files that end in ".c": >
+	:e *.c$
+This will not match a file ending in ".cpp".  Without the "$" it does match.
+
+The old value of an option can be obtained by hitting 'wildchar' just after
+the '='.  For example, typing 'wildchar' after ":set dir=" will insert the
+current value of 'dir'.  This overrules file name completion for the options
+that take a file name.
+
+If you would like using <S-Tab> for CTRL-P in an xterm, put this command in
+your .cshrc: >
+	xmodmap -e "keysym Tab = Tab Find"
+And this in your .vimrc: >
+	:cmap <Esc>[1~ <C-P>
+
+==============================================================================
+3. Ex command-lines					*cmdline-lines*
+
+The Ex commands have a few specialties:
+
+							*:quote* *:comment*
+'"' at the start of a line causes the whole line to be ignored.  '"'
+after a command causes the rest of the line to be ignored.  This can be used
+to add comments.  Example: >
+	:set ai		"set 'autoindent' option
+It is not possible to add a comment to a shell command ":!cmd" or to the
+":map" command and a few others (mainly commands that expect expressions)
+that see the '"' as part of their argument:
+
+    :argdo
+    :autocmd
+    :bufdo
+    :cexpr (and the like)
+    :cdo (and the like)
+    :command
+    :cscope (and the like)
+    :debug
+    :display
+    :echo (and the like)
+    :elseif
+    :execute
+    :folddoopen
+    :folddoclosed
+    :for
+    :grep (and the like)
+    :help (and the like)
+    :if
+    :let
+    :make
+    :map (and the like including :abbrev commands)
+    :menu (and the like)
+    :mkspell
+    :normal
+    :ownsyntax
+    :popup
+    :promptfind (and the like)
+    :registers
+    :return
+    :sort
+    :syntax
+    :tabdo
+    :tearoff
+    :vimgrep (and the like)
+    :while
+    :windo
+
+							*:bar* *:\bar*
+'|' can be used to separate commands, so you can give multiple commands in one
+line.  If you want to use '|' in an argument, precede it with '\'.
+
+These commands see the '|' as their argument, and can therefore not be
+followed by another Vim command:
+    :argdo
+    :autocmd
+    :bufdo
+    :cdo
+    :cfdo
+    :command
+    :cscope
+    :debug
+    :eval
+    :folddoopen
+    :folddoclosed
+    :function
+    :global
+    :help
+    :helpfind
+    :helpgrep
+    :lcscope
+    :ldo
+    :lfdo
+    :lhelpgrep
+    :make
+    :normal
+    :perl
+    :perldo
+    :promptfind
+    :promptrepl
+    :pyfile
+    :python
+    :registers
+    :read !
+    :scscope
+    :sign
+    :tabdo
+    :tcl
+    :tcldo
+    :tclfile
+    :terminal
+    :vglobal
+    :windo
+    :write !
+    :[range]!
+    a user defined command without the "-bar" argument |:command|
+
+Note that this is confusing (inherited from Vi): With ":g" the '|' is included
+in the command, with ":s" it is not.
+
+To be able to use another command anyway, use the ":execute" command.
+Example (append the output of "ls" and jump to the first line): >
+	:execute 'r !ls' | '[
+
+There is one exception: When the 'b' flag is present in 'cpoptions', with the
+":map" and ":abbr" commands and friends CTRL-V needs to be used instead of
+'\'.  You can also use "<Bar>" instead.  See also |map_bar|.
+
+Examples: >
+	:!ls | wc		view the output of two commands
+	:r !ls | wc		insert the same output in the text
+	:%g/foo/p|>		moves all matching lines one shiftwidth
+	:%s/foo/bar/|>		moves one line one shiftwidth
+	:map q 10^V|		map "q" to "10|"
+	:map q 10\| map \ l	map "q" to "10\" and map "\" to "l"
+					(when 'b' is present in 'cpoptions')
+
+You can also use <NL> to separate commands in the same way as with '|'.  To
+insert a <NL> use CTRL-V CTRL-J.  "^@" will be shown.  Using '|' is the
+preferred method.  But for external commands a <NL> must be used, because a
+'|' is included in the external command.  To avoid the special meaning of <NL>
+it must be preceded with a backslash.  Example: >
+	:r !date<NL>-join
+This reads the current date into the file and joins it with the previous line.
+
+Note that when the command before the '|' generates an error, the following
+commands will not be executed.
+
+
+Because of Vi compatibility the following strange commands are supported: >
+	:|			print current line (like ":p")
+	:3|			print line 3 (like ":3p")
+	:3			goto line 3
+
+A colon is allowed between the range and the command name.  It is ignored
+(this is Vi compatible).  For example: >
+	:1,$:s/pat/string
+
+When the character '%' or '#' is used where a file name is expected, they are
+expanded to the current and alternate file name (see the chapter "editing
+files" |:_%| |:_#|).
+
+Embedded spaces in file names are allowed on the Amiga if one file name is
+expected as argument.  Trailing spaces will be ignored, unless escaped with a
+backslash or CTRL-V.  Note that the ":next" command uses spaces to separate
+file names.  Escape the spaces to include them in a file name.  Example: >
+	:next foo\ bar goes\ to school\
+starts editing the three files "foo bar", "goes to" and "school ".
+
+When you want to use the special characters '"' or '|' in a command, or want
+to use '%' or '#' in a file name, precede them with a backslash.  The
+backslash is not required in a range and in the ":substitute" command.
+See also |`=|.
+
+							*:_!*
+The '!' (bang) character after an Ex command makes the command behave in a
+different way.  The '!' should be placed immediately after the command, without
+any blanks in between.  If you insert blanks the '!' will be seen as an
+argument for the command, which has a different meaning.  For example:
+	:w! name	write the current buffer to file "name", overwriting
+			any existing file
+	:w !name	send the current buffer as standard input to command
+			"name"
+
+==============================================================================
+4. Ex command-line ranges	*cmdline-ranges* *[range]* *E16*
+
+Some Ex commands accept a line range in front of them.  This is noted as
+[range].  It consists of one or more line specifiers, separated with ',' or
+';'.
+
+The basics are explained in section |10.3| of the user manual.
+
+In |Vim9| script a range needs to be prefixed with a colon to avoid ambiguity
+with continuation lines.  For example, "+" can be used for a range but is also
+a continuation of an expression: >
+	var result = start
+	+ print
+If the "+" is a range then it must be prefixed with a colon: >
+	var result = start
+	:+ print
+<
+						*:,* *:;*
+When separated with ';' the cursor position will be set to that line
+before interpreting the next line specifier.  This doesn't happen for ','.
+Examples: >
+   4,/this line/
+<	from line 4 till match with "this line" after the cursor line. >
+   5;/that line/
+<	from line 5 till match with "that line" after line 5.
+
+The default line specifier for most commands is the cursor position, but the
+commands ":write" and ":global" have the whole file (1,$) as default.
+
+If more line specifiers are given than required for the command, the first
+one(s) will be ignored.
+
+Line numbers may be specified with:		*:range* *{address}*
+	{number}	an absolute line number  *E1247*
+	.		the current line			  *:.*
+	$		the last line in the file		  *:$*
+	%		equal to 1,$ (the entire file)		  *:%*
+	't		position of mark t (lowercase)		  *:'*
+	'T		position of mark T (uppercase); when the mark is in
+			another file it cannot be used in a range
+	/{pattern}[/]	the next line where {pattern} matches	  *:/*
+				also see |:range-pattern| below
+	?{pattern}[?]	the previous line where {pattern} matches *:?*
+				also see |:range-pattern| below
+	\/		the next line where the previously used search
+			pattern matches
+	\?		the previous line where the previously used search
+			pattern matches
+	\&		the next line where the previously used substitute
+			pattern matches
+
+						*:range-offset*
+Each may be followed (several times) by '+' or '-' and an optional number.
+This number is added or subtracted from the preceding line number.  If the
+number is omitted, 1 is used.  If there is nothing before the '+' or '-' then
+the current line is used.
+						*:range-closed-fold*
+When a line number after the comma is in a closed fold it is adjusted to the
+last line of the fold, thus the whole fold is included.
+
+When a number is added this is done after the adjustment to the last line of
+the fold.  This means these lines are additionally included in the range.  For
+example: >
+   :3,4+2print
+On this text:
+	1 one ~
+	2 two ~
+	3 three ~
+	4 four FOLDED ~
+	5 five FOLDED ~
+	6 six ~
+	7 seven ~
+	8 eight ~
+Where lines four and five are a closed fold, ends up printing lines 3 to 7.
+The 7 comes from the "4" in the range, which is adjusted to the end of the
+closed fold, which is 5, and then the offset 2 is added.
+
+An example for subtracting (which isn't very useful): >
+   :2,4-1print
+On this text:
+	1 one ~
+	2 two ~
+	3 three FOLDED~
+	4 four FOLDED ~
+	5 five FOLDED ~
+	6 six FOLDED ~
+	7 seven ~
+	8 eight ~
+Where lines three to six are a closed fold, ends up printing lines 2 to 6.
+The 6 comes from the "4" in the range, which is adjusted to the end of the
+closed fold, which is 6, and then 1 is subtracted, then this is still in the
+closed fold and the last line of that fold is used, which is 6.
+
+							*:range-pattern*
+The "/" and "?" after {pattern} are required to separate the pattern from
+anything that follows.
+
+The "/" and "?" may be preceded with another address.  The search starts from
+there.  The difference from using ';' is that the cursor isn't moved.
+Examples: >
+	/pat1//pat2/	Find line containing "pat2" after line containing
+			"pat1", without moving the cursor.
+	7;/pat2/	Find line containing "pat2", after line 7, leaving
+			the cursor in line 7.
+
+The {number} must be between 0 and the number of lines in the file.  When
+using a 0 (zero) this is interpreted as a 1 by most commands.  Commands that
+use it as a count do use it as a zero (|:tag|, |:pop|, etc).  Some commands
+interpret the zero as "before the first line" (|:read|, search pattern, etc).
+
+Examples: >
+	.+3		three lines below the cursor
+	/that/+1	the line below the next line containing "that"
+	.,$		from current line until end of file
+	0;/that		the first line containing "that", also matches in the
+			first line.
+	1;/that		the first line after line 1 containing "that"
+
+Some commands allow for a count after the command.  This count is used as the
+number of lines to be used, starting with the line given in the last line
+specifier (the default is the cursor line).  The commands that accept a count
+are the ones that use a range but do not have a file name argument (because
+a file name can also be a number).  The count cannot be negative.
+
+Examples: >
+	:s/x/X/g 5	substitute 'x' by 'X' in the current line and four
+			following lines
+	:23d 4		delete lines 23, 24, 25 and 26
+
+
+Folds and Range
+
+When folds are active the line numbers are rounded off to include the whole
+closed fold.  See |fold-behavior|.
+
+
+Reverse Range						*E493*
+
+A range should have the lower line number first.  If this is not the case, Vim
+will ask you if it should swap the line numbers.
+	Backwards range given, OK to swap ~
+This is not done within the global command ":g".
+
+You can use ":silent" before a command to avoid the question, the range will
+always be swapped then.
+
+
+Count and Range						*N:*
+
+When giving a count before entering ":", this is translated into: >
+		:.,.+(count - 1)
+In words: The "count" lines at and after the cursor.  Example: To delete
+three lines: >
+		3:d<CR>		is translated into: .,.+2d<CR>
+<
+
+Visual Mode and Range
+							*v_:*
+{Visual}:	Starts a command-line with the Visual selected lines as a
+		range.  The code `:'<,'>` is used for this range, which makes
+		it possible to select a similar line from the command-line
+		history for repeating a command on different Visually selected
+		lines.
+
+:*						*:star* *:star-visual-range*
+		When Visual mode was already ended, a short way to use the
+		Visual area for a range is `:*`.  This requires that "*" does
+		not appear in 'cpo', see |cpo-star|.  Otherwise you will have
+		to type `:'<,'>`
+		For when "*" is in 'cpo' see |:star-compatible|.
+
+==============================================================================
+5. Ex command-line flags				*ex-flags*
+
+These flags are supported by a selection of Ex commands.  They print the line
+that the cursor ends up after executing the command:
+
+	l	output like for |:list|
+	#	add line number
+	p	output like for |:print|
+
+The flags can be combined, thus "l#" uses both a line number and |:list| style
+output.
+
+==============================================================================
+6. Ex special characters				*cmdline-special*
+
+Note: These are special characters in the executed command line.  If you want
+to insert special things while typing you can use the CTRL-R command.  For
+example, "%" stands for the current file name, while CTRL-R % inserts the
+current file name right away.  See |c_CTRL-R|.
+
+Note:  If you want to avoid the effects of special characters in a Vim script
+you may want to use |fnameescape()|.  Also see |`=|.
+
+
+In Ex commands, at places where a file name can be used, the following
+characters have a special meaning.  These can also be used in the expression
+function |expand()|.
+	%	Is replaced with the current file name.		  *:_%* *c_%*
+	#	Is replaced with the alternate file name.	  *:_#* *c_#*
+		This is remembered for every window.
+	#n	(where n is a number) is replaced with		  *:_#0* *:_#n*
+		the file name of buffer n.  "#0" is the same as "#".     *c_#n*
+	##	Is replaced with all names in the argument list	  *:_##* *c_##*
+		concatenated, separated by spaces.  Each space in a name
+		is preceded with a backslash.
+	#<n	(where n is a number > 0) is replaced with old	  *:_#<* *c_#<*
+		file name n.  See |:oldfiles| or |v:oldfiles| to get the
+		number.							*E809*
+		{only when compiled with the |+eval| and |+viminfo| features}
+In |Vim9-script| # is used to start a comment, use %% for the alternate file
+name:
+	%	Is replaced with the current file name.
+	%%	Is replaced with the alternate file name.	*:_%%* *c_%%*
+	%%n	(where n is a number) is replaced with		*:_%%0* *:_%%n*
+		the file name of buffer n.  "%%0" is the same as "%%".   *c_%%n*
+	%%%	Is replaced with all names in the argument	*:_%%%* *c_%%%#*
+		list concatenated, separated by spaces.
+	%%<n	(where n is a number > 0) is replaced with old  *:_%%<* *c_%%<*
+		file name n.
+
+Note that these, except "#<n", give the file name as it was typed.  If an
+absolute path is needed (when using the file name from a different directory),
+you need to add ":p".  See |filename-modifiers|.
+
+The "#<n" item returns an absolute path, but it will start with "~/" for files
+below your home directory.
+
+Note that backslashes are inserted before spaces, so that the command will
+correctly interpret the file name.  But this doesn't happen for shell
+commands.  For those you probably have to use quotes (this fails for files
+that contain a quote and wildcards): >
+	:!ls "%"
+	:r !spell "%"
+
+To avoid the special meaning of '%' and '#' insert a backslash before it.
+Detail: The special meaning is always escaped when there is a backslash before
+it, no matter how many backslashes.
+	you type:		result	~
+	   #			alternate.file
+	   \#			#
+	   \\#			\#
+Also see |`=|.
+
+							*E499* *E500*
+Note: these are typed literally, they are not special keys!
+							*:<cword>* *<cword>*
+	<cword>    is replaced with the word under the cursor (like |star|)
+							*:<cWORD>* *<cWORD>*
+	<cWORD>    is replaced with the WORD under the cursor (see |WORD|)
+							*:<cexpr>* *<cexpr>*
+	<cexpr>    is replaced with the word under the cursor, including more
+		   to form a C expression.  E.g., when the cursor is on "arg"
+		   of "ptr->arg" then the result is "ptr->arg"; when the
+		   cursor is on "]" of "list[idx]" then the result is
+		   "list[idx]".  This is used for |v:beval_text|.
+							*:<cfile>* *<cfile>*
+	<cfile>    is replaced with the path name under the cursor (like what
+		   |gf| uses)
+							*:<afile>* *<afile>*
+	<afile>    When executing autocommands, is replaced with the file name
+		   of the buffer being manipulated, or the file for a read or
+		   write.  *E495*
+							*:<abuf>* *<abuf>*
+	<abuf>     When executing autocommands, is replaced with the currently
+		   effective buffer number (for ":r file" and ":so file" it is
+		   the current buffer, the file being read/sourced is not in a
+		   buffer).  *E496*
+							*:<amatch>* *<amatch>*
+	<amatch>   When executing autocommands, is replaced with the match for
+		   which this autocommand was executed.  *E497*
+		   It differs from <afile> when the file name isn't used to
+		   match with (for FileType, Syntax and SpellFileMissing
+		   events).
+		   When the match is with a file name, it is expanded to the
+		   full path.
+							*:<sfile>* *<sfile>*
+	<sfile>    When executing a `:source` command, is replaced with the
+		   file name of the sourced file.  *E498*
+		   When executing a legacy function, is replaced with the call
+		   stack, as with <stack> (this is for backwards
+		   compatibility, using <stack> or <script> is preferred).
+		   In Vim9 script using <sfile> in a function gives error
+		   *E1245* .
+		   Note that filename-modifiers are useless when <sfile> is
+		   not used inside a script.
+							*:<stack>* *<stack>*
+	<stack>	   is replaced with the call stack, using
+		   "function {function-name}[{lnum}]" for a function line
+		   and "script {file-name}[{lnum}]" for a script line, and
+		   ".." in between items.  E.g.:
+		   "function {function-name1}[{lnum}]..{function-name2}[{lnum}]"
+		   If there is no call stack you get error *E489* .
+							*:<script>* *<script>*
+	<script>   When executing a `:source` command, is replaced with the file
+		   name of the sourced file.  When executing a function, is
+		   replaced with the file name of the script where it is
+		   defined.
+		   If the file name cannot be determined you get error *E1274* .
+							*:<slnum>* *<slnum>*
+	<slnum>	   When executing a `:source` command, is replaced with the
+		   line number.  *E842*
+		   When executing a function it's the line number relative to
+		   the start of the function.
+							*:<sflnum>* *<sflnum>*
+	<sflnum>   When executing a script, is replaced with the line number.
+		   It differs from <slnum> in that <sflnum> is replaced with
+		   the script line number in any situation.  *E961*
+							*:<client>* *<client>*
+	<client>   is replaced with the {clinetid} of the last received
+		   message in |server2client()|
+
+							 *filename-modifiers*
+*:_%:* *::8* *::p* *::.* *::~* *::h* *::t* *::r* *::e* *::s* *::gs* *::S*
+     *%:8* *%:p* *%:.* *%:~* *%:h* *%:t* *%:r* *%:e* *%:s* *%:gs* *%:S*
+The file name modifiers can be used after "%", "#", "#n", "<cfile>", "<sfile>",
+"<afile>" or "<abuf>".  They are also used with the |fnamemodify()| function.
+
+These modifiers can be given, in this order:
+	:p	Make file name a full path.  Must be the first modifier.  Also
+		changes "~/" (and "~user/" for Unix and VMS) to the path for
+		the home directory.  If the name is a directory a path
+		separator is added at the end.  For a file name that does not
+		exist and does not have an absolute path the result is
+		unpredictable.  On MS-Windows an 8.3 filename is expanded to
+		the long name.
+	:8	Converts the path to 8.3 short format (currently only on
+		MS-Windows).  Will act on as much of a path that is an
+		existing path.
+	:~	Reduce file name to be relative to the home directory, if
+		possible.  File name is unmodified if it is not below the home
+		directory.
+	:.	Reduce file name to be relative to current directory, if
+		possible.  File name is unmodified if it is not below the
+		current directory.
+		For maximum shortness, use ":~:.".
+	:h	Head of the file name (the last component and any separators
+		removed).  Cannot be used with :e, :r or :t.
+		Can be repeated to remove several components at the end.
+		When the file name ends in a path separator, only the path
+		separator is removed.  Thus ":p:h" on a directory name results
+		on the directory name itself (without trailing slash).
+		When the file name is an absolute path (starts with "/" for
+		Unix; "x:\" for Win32; "drive:" for Amiga), that part is not
+		removed.  When there is no head (path is relative to current
+		directory) the result is empty.
+	:t	Tail of the file name (last component of the name).  Must
+		precede any :r or :e.
+	:r	Root of the file name (the last extension removed).  When
+		there is only an extension (file name that starts with '.',
+		e.g., ".vimrc"), it is not removed.  Can be repeated to remove
+		several extensions (last one first).
+	:e	Extension of the file name.  Only makes sense when used alone.
+		When there is no extension the result is empty.
+		When there is only an extension (file name that starts with
+		'.'), the result is empty.  Can be repeated to include more
+		extensions.  If there are not enough extensions (but at least
+		one) as much as possible are included.
+	:s?pat?sub?
+		Substitute the first occurrence of "pat" with "sub".  This
+		works like the |:s| command.  "pat" is a regular expression.
+		Any character can be used for '?', but it must not occur in
+		"pat" or "sub".
+		After this, the previous modifiers can be used again.  For
+		example ":p", to make a full path after the substitution.
+	:gs?pat?sub?
+		Substitute all occurrences of "pat" with "sub".  Otherwise
+		this works like ":s".
+	:S	Escape special characters for use with a shell command (see
+		|shellescape()|). Must be the last one. Examples: >
+		    :!dir <cfile>:S
+		    :call system('chmod +w -- ' . expand('%:S'))
+
+Examples, when the file name is "src/version.c", current dir
+"/home/mool/vim": >
+  :p			/home/mool/vim/src/version.c
+  :p:.				       src/version.c
+  :p:~				 ~/vim/src/version.c
+  :h				       src
+  :p:h			/home/mool/vim/src
+  :p:h:h		/home/mool/vim
+  :t					   version.c
+  :p:t					   version.c
+  :r				       src/version
+  :p:r			/home/mool/vim/src/version
+  :t:r					   version
+  :e						   c
+  :s?version?main?		       src/main.c
+  :s?version?main?:p	/home/mool/vim/src/main.c
+  :p:gs?/?\\?		\home\mool\vim\src\version.c
+
+Examples, when the file name is "src/version.c.gz": >
+  :p			/home/mool/vim/src/version.c.gz
+  :e						     gz
+  :e:e						   c.gz
+  :e:e:e					   c.gz
+  :e:e:r					   c
+  :r				       src/version.c
+  :r:e						   c
+  :r:r				       src/version
+  :r:r:r			       src/version
+<
+					*extension-removal* *:_%<*
+If a "<" is appended to "%", "#", "#n" or "CTRL-V p" the extension of the file
+name is removed (everything after and including the last '.' in the file
+name).  This is included for backwards compatibility with version 3.0, the
+":r" form is preferred.  Examples: >
+
+	%		current file name
+	%<		current file name without extension
+	#		alternate file name for current window
+	#<		idem, without extension
+	#31		alternate file number 31
+	#31<		idem, without extension
+	<cword>		word under the cursor
+	<cWORD>		WORD under the cursor (see |WORD|)
+	<cfile>		path name under the cursor
+	<cfile><	idem, without extension
+
+Note: Where a file name is expected wildcards expansion is done.  On Unix the
+shell is used for this, unless it can be done internally (for speed).
+Unless in |restricted-mode|, backticks work also, like in >
+	:n `echo *.c`
+But expansion is only done if there are any wildcards before expanding the
+'%', '#', etc..  This avoids expanding wildcards inside a file name.  If you
+want to expand the result of <cfile>, add a wildcard character to it.
+Examples: (alternate file name is "?readme?")
+	command		expands to  ~
+	:e #		:e ?readme?
+	:e `ls #`	:e {files matching "?readme?"}
+	:e #.*		:e {files matching "?readme?.*"}
+	:cd <cfile>	:cd {file name under cursor}
+	:cd <cfile>*	:cd {file name under cursor plus "*" and then expanded}
+Also see |`=|.
+
+When the expanded argument contains a "!" and it is used for a shell command
+(":!cmd", ":r !cmd" or ":w !cmd"), the "!" is escaped with a backslash to
+avoid it being expanded into a previously used command.  When the 'shell'
+option contains "sh", this is done twice, to avoid the shell trying to expand
+the "!".
+
+							*filename-backslash*
+For filesystems that use a backslash as directory separator (MS-Windows), it's
+a bit difficult to recognize a backslash that is used to escape the special
+meaning of the next character.  The general rule is: If the backslash is
+followed by a normal file name character, it does not have a special meaning.
+Therefore "\file\foo" is a valid file name, you don't have to type the
+backslash twice.
+
+An exception is the '$' sign.  It is a valid character in a file name.  But
+to avoid a file name like "$home" to be interpreted as an environment variable,
+it needs to be preceded by a backslash.  Therefore you need to use "/\$home"
+for the file "$home" in the root directory.  A few examples:
+
+	FILE NAME	INTERPRETED AS	~
+	$home		expanded to value of environment var $home
+	\$home		file "$home" in current directory
+	/\$home		file "$home" in root directory
+	\\$home		file "\\", followed by expanded $home
+
+Also see |`=|.
+
+==============================================================================
+7. Command-line window				*cmdline-window* *cmdwin*
+							*command-line-window*
+In the command-line window the command line can be edited just like editing
+text in any window.  It is a special kind of window, because you cannot leave
+it in a normal way.
+
+
+OPEN						*c_CTRL-F* *q:* *q/* *q?*
+
+There are two ways to open the command-line window:
+1. From Command-line mode, use the key specified with the 'cedit' option.
+   The default is CTRL-F when 'compatible' is not set.
+2. From Normal mode, use the "q:", "q/" or "q?" command.
+   This starts editing an Ex command-line ("q:") or search string ("q/" or
+   "q?").  Note that this is not possible while recording is in progress (the
+   "q" stops recording then).
+
+When the window opens it is filled with the command-line history.  The last
+line contains the command as typed so far.  The left column will show a
+character that indicates the type of command-line being edited, see
+|cmdwin-char|.
+
+Vim will be in Normal mode when the editor is opened, except when 'insertmode'
+is set.
+								*E1292*
+Once a command-line window is open it is not possible to open another one.
+
+The height of the window is specified with 'cmdwinheight' (or smaller if there
+is no room).  The window is always full width and is positioned just above the
+command-line.
+
+
+EDIT
+
+You can now use commands to move around and edit the text in the window.  Both
+in Normal mode and Insert mode.
+
+It is possible to use ":", "/" and other commands that use the command-line,
+but it's not possible to open another command-line window then.  There is no
+nesting.
+							*E11* *E1188*
+The command-line window is not a normal window.  It is not possible to move to
+another window or edit another buffer.  All commands that would do this are
+disabled in the command-line window.  Of course it _is_ possible to execute
+any command that you entered in the command-line window.  Other text edits are
+discarded when closing the window.
+
+
+CLOSE							*E199*
+
+There are several ways to leave the command-line window:
+
+<CR>		Execute the command-line under the cursor.  Works both in
+		Insert and in Normal mode.
+CTRL-C		Continue in Command-line mode.  The command-line under the
+		cursor is used as the command-line.  Works both in Insert and
+		in Normal mode.  There is no redraw, thus the window will
+		remain visible.
+:quit		Discard the command line and go back to Normal mode.
+		":close", CTRL-W c, ":exit", ":xit" and CTRL-\ CTRL-N also
+		work.
+:qall		Quit Vim, unless there are changes in some buffer.
+:qall!		Quit Vim, discarding changes to any buffer.
+
+Once the command-line window is closed the old window sizes are restored.  The
+executed command applies to the window and buffer where the command-line was
+started from.  This works as if the command-line window was not there, except
+that there will be an extra screen redraw.
+The buffer used for the command-line window is deleted.  Any changes to lines
+other than the one that is executed with <CR> are lost.
+
+If you would like to execute the command under the cursor and then have the
+command-line window open again, you may find this mapping useful: >
+
+	:autocmd CmdwinEnter * map <buffer> <F5> <CR>q:
+
+
+VARIOUS
+
+The command-line window cannot be used:
+- when there already is a command-line window (no nesting)
+- for entering an encryption key or when using inputsecret()
+
+Some options are set when the command-line window is opened:
+'filetype'	"vim", when editing an Ex command-line; this starts Vim syntax
+		highlighting if it was enabled
+'rightleft'	off
+'modifiable'	on
+'buftype'	"nofile"
+'swapfile'	off
+
+It is allowed to write the buffer contents to a file.  This is an easy way to
+save the command-line history and read it back later.
+
+If the 'wildchar' option is set to <Tab>, and the command-line window is used
+for an Ex command, then two mappings will be added to use <Tab> for completion
+in the command-line window, like this: >
+	:inoremap <buffer> <Tab> <C-X><C-V>
+	:nnoremap <buffer> <Tab> a<C-X><C-V>
+Note that hitting <Tab> in Normal mode will do completion on the next
+character.  That way it works at the end of the line.
+If you don't want these mappings, disable them with: >
+	au CmdwinEnter [:>] iunmap <Tab>
+	au CmdwinEnter [:>] nunmap <Tab>
+You could put these lines in your vimrc file.
+
+While in the command-line window you cannot use the mouse to put the cursor in
+another window, or drag statuslines of other windows.  You can drag the
+statusline of the command-line window itself and the statusline above it.
+Thus you can resize the command-line window, but not others.
+
+The |getcmdwintype()| function returns the type of the command-line being
+edited as described in |cmdwin-char|.
+
+
+AUTOCOMMANDS
+
+Two autocommand events are used: |CmdwinEnter| and |CmdwinLeave|.  You can use
+the Cmdwin events to do settings specifically for the command-line window.
+Be careful not to cause side effects!
+Example: >
+	:au CmdwinEnter :  let b:cpt_save = &cpt | set cpt=.
+	:au CmdwinLeave :  let &cpt = b:cpt_save
+This sets 'complete' to use completion in the current window for |i_CTRL-N|.
+Another example: >
+	:au CmdwinEnter [/?]  startinsert
+This will make Vim start in Insert mode in the command-line window.
+
+						*cmdwin-char*
+The character used for the pattern indicates the type of command-line:
+	:	normal Ex command
+	>	debug mode command |debug-mode|
+	/	forward search string
+	?	backward search string
+	=	expression for "= |expr-register|
+	@	string for |input()|
+	-	text for |:insert| or |:append|
+
+ vim:tw=78:ts=8:noet:ft=help:norl: