summaryrefslogtreecommitdiffstats
path: root/runtime/doc/vim.man
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--runtime/doc/vim.man435
-rwxr-xr-xruntime/doc/vim.man.infobin0 -> 582 bytes
2 files changed, 435 insertions, 0 deletions
diff --git a/runtime/doc/vim.man b/runtime/doc/vim.man
new file mode 100644
index 0000000..cc6a9bc
--- /dev/null
+++ b/runtime/doc/vim.man
@@ -0,0 +1,435 @@
+VIM(1) General Commands Manual VIM(1)
+
+
+
+NAME
+ vim - Vi IMproved, a programmer's text editor
+
+SYNOPSIS
+ vim [options] [file ..]
+ vim [options] -
+ vim [options] -t tag
+ vim [options] -q [errorfile]
+
+ ex
+ view
+ gvim gview evim eview
+ rvim rview rgvim rgview
+
+DESCRIPTION
+ Vim is a text editor that is upwards compatible to Vi. It can be used
+ to edit all kinds of plain text. It is especially useful for editing
+ programs.
+
+ There are a lot of enhancements above Vi: multi level undo, multi win‐
+ dows and buffers, syntax highlighting, command line editing, filename
+ completion, on-line help, visual selection, etc.. See ":help
+ vi_diff.txt" for a summary of the differences between Vim and Vi.
+
+ While running Vim a lot of help can be obtained from the on-line help
+ system, with the ":help" command. See the ON-LINE HELP section below.
+
+ Most often Vim is started to edit a single file with the command
+
+ vim file
+
+ More generally Vim is started with:
+
+ vim [options] [filelist]
+
+ If the filelist is missing, the editor will start with an empty buffer.
+ Otherwise exactly one out of the following four may be used to choose
+ one or more files to be edited.
+
+ file .. A list of filenames. The first one will be the current
+ file and read into the buffer. The cursor will be posi‐
+ tioned on the first line of the buffer. You can get to the
+ other files with the ":next" command. To edit a file that
+ starts with a dash, precede the filelist with "--".
+
+ - The file to edit is read from stdin. Commands are read
+ from stderr, which should be a tty.
+
+ -t {tag} The file to edit and the initial cursor position depends on
+ a "tag", a sort of goto label. {tag} is looked up in the
+ tags file, the associated file becomes the current file and
+ the associated command is executed. Mostly this is used
+ for C programs, in which case {tag} could be a function
+ name. The effect is that the file containing that function
+ becomes the current file and the cursor is positioned on
+ the start of the function. See ":help tag-commands".
+
+ -q [errorfile]
+ Start in quickFix mode. The file [errorfile] is read and
+ the first error is displayed. If [errorfile] is omitted,
+ the filename is obtained from the 'errorfile' option (de‐
+ faults to "AztecC.Err" for the Amiga, "errors.err" on other
+ systems). Further errors can be jumped to with the ":cn"
+ command. See ":help quickfix".
+
+ Vim behaves differently, depending on the name of the command (the exe‐
+ cutable may still be the same file).
+
+ vim The "normal" way, everything is default.
+
+ ex Start in Ex mode. Go to Normal mode with the ":vi" command.
+ Can also be done with the "-e" argument.
+
+ view Start in read-only mode. You will be protected from writing
+ the files. Can also be done with the "-R" argument.
+
+ gvim gview
+ The GUI version. Starts a new window. Can also be done with
+ the "-g" argument.
+
+ evim eview
+ The GUI version in easy mode. Starts a new window. Can also
+ be done with the "-y" argument.
+
+ rvim rview rgvim rgview
+ Like the above, but with restrictions. It will not be possi‐
+ ble to start shell commands, or suspend Vim. Can also be
+ done with the "-Z" argument.
+
+OPTIONS
+ The options may be given in any order, before or after filenames. Op‐
+ tions without an argument can be combined after a single dash.
+
+ +[num] For the first file the cursor will be positioned on line
+ "num". If "num" is missing, the cursor will be positioned
+ on the last line.
+
+ +/{pat} For the first file the cursor will be positioned in the
+ line with the first occurrence of {pat}. See ":help
+ search-pattern" for the available search patterns.
+
+ +{command}
+
+ -c {command}
+ {command} will be executed after the first file has been
+ read. {command} is interpreted as an Ex command. If the
+ {command} contains spaces it must be enclosed in double
+ quotes (this depends on the shell that is used). Example:
+ vim "+set si" main.c
+ Note: You can use up to 10 "+" or "-c" commands.
+
+ -S {file} {file} will be sourced after the first file has been read.
+ This is equivalent to -c "source {file}". {file} cannot
+ start with '-'. If {file} is omitted "Session.vim" is used
+ (only works when -S is the last argument).
+
+ --cmd {command}
+ Like using "-c", but the command is executed just before
+ processing any vimrc file. You can use up to 10 of these
+ commands, independently from "-c" commands.
+
+ -A If Vim has been compiled with ARABIC support for editing
+ right-to-left oriented files and Arabic keyboard mapping,
+ this option starts Vim in Arabic mode, i.e. 'arabic' is
+ set. Otherwise an error message is given and Vim aborts.
+
+ -b Binary mode. A few options will be set that makes it pos‐
+ sible to edit a binary or executable file.
+
+ -C Compatible. Set the 'compatible' option. This will make
+ Vim behave mostly like Vi, even though a .vimrc file ex‐
+ ists.
+
+ -d Start in diff mode. There should between two to eight file
+ name arguments. Vim will open all the files and show dif‐
+ ferences between them. Works like vimdiff(1).
+
+ -d {device} Open {device} for use as a terminal. Only on the Amiga.
+ Example: "-d con:20/30/600/150".
+
+ -D Debugging. Go to debugging mode when executing the first
+ command from a script.
+
+ -e Start Vim in Ex mode, just like the executable was called
+ "ex".
+
+ -E Start Vim in improved Ex mode, just like the executable was
+ called "exim".
+
+ -f Foreground. For the GUI version, Vim will not fork and de‐
+ tach from the shell it was started in. On the Amiga, Vim
+ is not restarted to open a new window. This option should
+ be used when Vim is executed by a program that will wait
+ for the edit session to finish (e.g. mail). On the Amiga
+ the ":sh" and ":!" commands will not work.
+
+ --nofork Foreground. For the GUI version, Vim will not fork and de‐
+ tach from the shell it was started in.
+
+ -F If Vim has been compiled with FKMAP support for editing
+ right-to-left oriented files and Farsi keyboard mapping,
+ this option starts Vim in Farsi mode, i.e. 'fkmap' and
+ 'rightleft' are set. Otherwise an error message is given
+ and Vim aborts.
+
+ -g If Vim has been compiled with GUI support, this option en‐
+ ables the GUI. If no GUI support was compiled in, an error
+ message is given and Vim aborts.
+
+ -h Give a bit of help about the command line arguments and op‐
+ tions. After this Vim exits.
+
+ -H If Vim has been compiled with RIGHTLEFT support for editing
+ right-to-left oriented files and Hebrew keyboard mapping,
+ this option starts Vim in Hebrew mode, i.e. 'hkmap' and
+ 'rightleft' are set. Otherwise an error message is given
+ and Vim aborts.
+
+ -i {viminfo}
+ Specifies the filename to use when reading or writing the
+ viminfo file, instead of the default "~/.viminfo". This
+ can also be used to skip the use of the .viminfo file, by
+ giving the name "NONE".
+
+ -L Same as -r.
+
+ -l Lisp mode. Sets the 'lisp' and 'showmatch' options on.
+
+ -m Modifying files is disabled. Resets the 'write' option.
+ You can still modify the buffer, but writing a file is not
+ possible.
+
+ -M Modifications not allowed. The 'modifiable' and 'write'
+ options will be unset, so that changes are not allowed and
+ files can not be written. Note that these options can be
+ set to enable making modifications.
+
+ -N No-compatible mode. Resets the 'compatible' option. This
+ will make Vim behave a bit better, but less Vi compatible,
+ even though a .vimrc file does not exist.
+
+ -n No swap file will be used. Recovery after a crash will be
+ impossible. Handy if you want to edit a file on a very
+ slow medium (e.g. floppy). Can also be done with ":set
+ uc=0". Can be undone with ":set uc=200".
+
+ -nb Become an editor server for NetBeans. See the docs for de‐
+ tails.
+
+ -o[N] Open N windows stacked. When N is omitted, open one window
+ for each file.
+
+ -O[N] Open N windows side by side. When N is omitted, open one
+ window for each file.
+
+ -p[N] Open N tab pages. When N is omitted, open one tab page for
+ each file.
+
+ -R Read-only mode. The 'readonly' option will be set. You
+ can still edit the buffer, but will be prevented from acci‐
+ dentally overwriting a file. If you do want to overwrite a
+ file, add an exclamation mark to the Ex command, as in
+ ":w!". The -R option also implies the -n option (see
+ above). The 'readonly' option can be reset with ":set
+ noro". See ":help 'readonly'".
+
+ -r List swap files, with information about using them for re‐
+ covery.
+
+ -r {file} Recovery mode. The swap file is used to recover a crashed
+ editing session. The swap file is a file with the same
+ filename as the text file with ".swp" appended. See ":help
+ recovery".
+
+ -s Silent mode. Only when started as "Ex" or when the "-e"
+ option was given before the "-s" option.
+
+ -s {scriptin}
+ The script file {scriptin} is read. The characters in the
+ file are interpreted as if you had typed them. The same
+ can be done with the command ":source! {scriptin}". If the
+ end of the file is reached before the editor exits, further
+ characters are read from the keyboard.
+
+ -T {terminal}
+ Tells Vim the name of the terminal you are using. Only re‐
+ quired when the automatic way doesn't work. Should be a
+ terminal known to Vim (builtin) or defined in the termcap
+ or terminfo file.
+
+ -u {vimrc} Use the commands in the file {vimrc} for initializations.
+ All the other initializations are skipped. Use this to
+ edit a special kind of files. It can also be used to skip
+ all initializations by giving the name "NONE". See ":help
+ initialization" within vim for more details.
+
+ -U {gvimrc} Use the commands in the file {gvimrc} for GUI initializa‐
+ tions. All the other GUI initializations are skipped. It
+ can also be used to skip all GUI initializations by giving
+ the name "NONE". See ":help gui-init" within vim for more
+ details.
+
+ -V[N] Verbose. Give messages about which files are sourced and
+ for reading and writing a viminfo file. The optional num‐
+ ber N is the value for 'verbose'. Default is 10.
+
+ -v Start Vim in Vi mode, just like the executable was called
+ "vi". This only has effect when the executable is called
+ "ex".
+
+ -w {scriptout}
+ All the characters that you type are recorded in the file
+ {scriptout}, until you exit Vim. This is useful if you
+ want to create a script file to be used with "vim -s" or
+ ":source!". If the {scriptout} file exists, characters are
+ appended.
+
+ -W {scriptout}
+ Like -w, but an existing file is overwritten.
+
+ -x Use encryption when writing files. Will prompt for a crypt
+ key.
+
+ -X Don't connect to the X server. Shortens startup time in a
+ terminal, but the window title and clipboard will not be
+ used.
+
+ -y Start Vim in easy mode, just like the executable was called
+ "evim" or "eview". Makes Vim behave like a click-and-type
+ editor.
+
+ -Z Restricted mode. Works like the executable starts with
+ "r".
+
+ -- Denotes the end of the options. Arguments after this will
+ be handled as a file name. This can be used to edit a
+ filename that starts with a '-'.
+
+ --clean Do not use any personal configuration (vimrc, plugins,
+ etc.). Useful to see if a problem reproduces with a clean
+ Vim setup.
+
+ --echo-wid GTK GUI only: Echo the Window ID on stdout.
+
+ --help Give a help message and exit, just like "-h".
+
+ --literal Take file name arguments literally, do not expand wild‐
+ cards. This has no effect on Unix where the shell expands
+ wildcards.
+
+ --noplugin Skip loading plugins. Implied by -u NONE.
+
+ --remote Connect to a Vim server and make it edit the files given in
+ the rest of the arguments. If no server is found a warning
+ is given and the files are edited in the current Vim.
+
+ --remote-expr {expr}
+ Connect to a Vim server, evaluate {expr} in it and print
+ the result on stdout.
+
+ --remote-send {keys}
+ Connect to a Vim server and send {keys} to it.
+
+ --remote-silent
+ As --remote, but without the warning when no server is
+ found.
+
+ --remote-wait
+ As --remote, but Vim does not exit until the files have
+ been edited.
+
+ --remote-wait-silent
+ As --remote-wait, but without the warning when no server is
+ found.
+
+ --serverlist
+ List the names of all Vim servers that can be found.
+
+ --servername {name}
+ Use {name} as the server name. Used for the current Vim,
+ unless used with a --remote argument, then it's the name of
+ the server to connect to.
+
+ --socketid {id}
+ GTK GUI only: Use the GtkPlug mechanism to run gvim in an‐
+ other window.
+
+ --startuptime {file}
+ During startup write timing messages to the file {fname}.
+
+ --version Print version information and exit.
+
+ON-LINE HELP
+ Type ":help" in Vim to get started. Type ":help subject" to get help
+ on a specific subject. For example: ":help ZZ" to get help for the
+ "ZZ" command. Use <Tab> and CTRL-D to complete subjects (":help cmd‐
+ line-completion"). Tags are present to jump from one place to another
+ (sort of hypertext links, see ":help"). All documentation files can be
+ viewed in this way, for example ":help syntax.txt".
+
+FILES
+ /usr/local/lib/vim/doc/*.txt
+ The Vim documentation files. Use ":help doc-file-list"
+ to get the complete list.
+
+ /usr/local/lib/vim/doc/tags
+ The tags file used for finding information in the docu‐
+ mentation files.
+
+ /usr/local/lib/vim/syntax/syntax.vim
+ System wide syntax initializations.
+
+ /usr/local/lib/vim/syntax/*.vim
+ Syntax files for various languages.
+
+ /usr/local/lib/vim/vimrc
+ System wide Vim initializations.
+
+ ~/.vimrc Your personal Vim initializations.
+
+ /usr/local/lib/vim/gvimrc
+ System wide gvim initializations.
+
+ ~/.gvimrc Your personal gvim initializations.
+
+ /usr/local/lib/vim/optwin.vim
+ Script used for the ":options" command, a nice way to
+ view and set options.
+
+ /usr/local/lib/vim/menu.vim
+ System wide menu initializations for gvim.
+
+ /usr/local/lib/vim/bugreport.vim
+ Script to generate a bug report. See ":help bugs".
+
+ /usr/local/lib/vim/filetype.vim
+ Script to detect the type of a file by its name. See
+ ":help 'filetype'".
+
+ /usr/local/lib/vim/scripts.vim
+ Script to detect the type of a file by its contents.
+ See ":help 'filetype'".
+
+ /usr/local/lib/vim/print/*.ps
+ Files used for PostScript printing.
+
+ For recent info read the VIM home page:
+ <URL:http://www.vim.org/>
+
+SEE ALSO
+ vimtutor(1)
+
+AUTHOR
+ Most of Vim was made by Bram Moolenaar, with a lot of help from others.
+ See ":help credits" in Vim.
+ Vim is based on Stevie, worked on by: Tim Thompson, Tony Andrews and
+ G.R. (Fred) Walter. Although hardly any of the original code remains.
+
+BUGS
+ Probably. See ":help todo" for a list of known problems.
+
+ Note that a number of things that may be regarded as bugs by some, are
+ in fact caused by a too-faithful reproduction of Vi's behaviour. And
+ if you think other things are bugs "because Vi does it differently",
+ you should take a closer look at the vi_diff.txt file (or type :help
+ vi_diff.txt when in Vim). Also have a look at the 'compatible' and
+ 'cpoptions' options.
+
+
+
+ 2021 Jun 13 VIM(1)
diff --git a/runtime/doc/vim.man.info b/runtime/doc/vim.man.info
new file mode 100755
index 0000000..133f9a0
--- /dev/null
+++ b/runtime/doc/vim.man.info
Binary files differ