summaryrefslogtreecommitdiffstats
path: root/runtime/doc/windows.txt
diff options
context:
space:
mode:
Diffstat (limited to 'runtime/doc/windows.txt')
-rw-r--r--runtime/doc/windows.txt1440
1 files changed, 1440 insertions, 0 deletions
diff --git a/runtime/doc/windows.txt b/runtime/doc/windows.txt
new file mode 100644
index 0000000..924a932
--- /dev/null
+++ b/runtime/doc/windows.txt
@@ -0,0 +1,1440 @@
+*windows.txt* For Vim version 9.0. Last change: 2022 Nov 27
+
+
+ VIM REFERENCE MANUAL by Bram Moolenaar
+
+
+Editing with multiple windows and buffers. *windows* *buffers*
+
+The commands which have been added to use multiple windows and buffers are
+explained here. Additionally, there are explanations for commands that work
+differently when used in combination with more than one window.
+
+The basics are explained in chapter 7 and 8 of the user manual |usr_07.txt|
+|usr_08.txt|.
+
+1. Introduction |windows-intro|
+2. Starting Vim |windows-starting|
+3. Opening and closing a window |opening-window|
+4. Moving cursor to other windows |window-move-cursor|
+5. Moving windows around |window-moving|
+6. Window resizing |window-resize|
+7. Argument and buffer list commands |buffer-list|
+8. Do a command in all buffers or windows |list-repeat|
+9. Tag or file name under the cursor |window-tag|
+10. The preview window |preview-window|
+11. Using hidden buffers |buffer-hidden|
+12. Special kinds of buffers |special-buffers|
+
+{not able to use multiple windows when the |+windows| feature was disabled at
+compile time}
+
+==============================================================================
+1. Introduction *windows-intro* *window*
+
+Summary:
+ A buffer is the in-memory text of a file.
+ A window is a viewport on a buffer.
+ A tab page is a collection of windows.
+
+A window is a viewport onto a buffer. You can use multiple windows on one
+buffer, or several windows on different buffers.
+
+A buffer is a file loaded into memory for editing. The original file remains
+unchanged until you write the buffer to the file.
+
+A buffer can be in one of three states:
+
+ *active-buffer*
+active: The buffer is displayed in a window. If there is a file for this
+ buffer, it has been read into the buffer. The buffer may have been
+ modified since then and thus be different from the file.
+ *hidden-buffer*
+hidden: The buffer is not displayed. If there is a file for this buffer, it
+ has been read into the buffer. Otherwise it's the same as an active
+ buffer, you just can't see it.
+ *inactive-buffer*
+inactive: The buffer is not displayed and does not contain anything. Options
+ for the buffer are remembered if the file was once loaded. It can
+ contain marks from the |viminfo| file. But the buffer doesn't
+ contain text.
+
+In a table:
+
+state displayed loaded ":buffers" ~
+ in window shows ~
+active yes yes 'a'
+hidden no yes 'h'
+inactive no no ' '
+
+Note: All CTRL-W commands can also be executed with |:wincmd|, for those
+places where a Normal mode command can't be used or is inconvenient.
+
+The main Vim window can hold several split windows. There are also tab pages
+|tab-page|, each of which can hold multiple windows.
+ *window-ID* *winid* *windowid*
+Each window has a unique identifier called the window ID. This identifier
+will not change within a Vim session. The |win_getid()| and |win_id2tabwin()|
+functions can be used to convert between the window/tab number and the
+identifier. There is also the window number, which may change whenever
+windows are opened or closed, see |winnr()|.
+The window number is only valid in one specific tab. The window ID is valid
+across tabs. For most functions that take a window ID or a window number, the
+window number only applies to the current tab, while the window ID can refer
+to a window in any tab.
+
+Each buffer has a unique number and the number will not change within a Vim
+session. The |bufnr()| and |bufname()| functions can be used to convert
+between a buffer name and the buffer number.
+
+==============================================================================
+2. Starting Vim *windows-starting*
+
+By default, Vim starts with one window, just like Vi.
+
+The "-o" and "-O" arguments to Vim can be used to open a window for each file
+in the argument list. The "-o" argument will split the windows horizontally;
+the "-O" argument will split the windows vertically. If both "-o" and "-O"
+are given, the last one encountered will be used to determine the split
+orientation. For example, this will open three windows, split horizontally: >
+ vim -o file1 file2 file3
+
+"-oN", where N is a decimal number, opens N windows split horizontally. If
+there are more file names than windows, only N windows are opened and some
+files do not get a window. If there are more windows than file names, the
+last few windows will be editing empty buffers. Similarly, "-ON" opens N
+windows split vertically, with the same restrictions.
+
+If there are many file names, the windows will become very small. You might
+want to set the 'winheight' and/or 'winwidth' options to create a workable
+situation.
+
+Buf/Win Enter/Leave |autocommand|s are not executed when opening the new
+windows and reading the files, that's only done when they are really entered.
+
+ *status-line*
+A status line will be used to separate windows. The 'laststatus' option tells
+when the last window also has a status line:
+ 'laststatus' = 0 never a status line
+ 'laststatus' = 1 status line if there is more than one window
+ 'laststatus' = 2 always a status line
+
+You can change the contents of the status line with the 'statusline' option.
+This option can be local to the window, so that you can have a different
+status line in each window.
+
+Normally, inversion is used to display the status line. This can be changed
+with the 's' character in the 'highlight' option. For example, "sb" sets it to
+bold characters. If no highlighting is used for the status line ("sn"), the
+'^' character is used for the current window, and '=' for other windows. If
+the mouse is supported and enabled with the 'mouse' option, a status line can
+be dragged to resize windows.
+
+Note: If you expect your status line to be in reverse video and it isn't,
+check if the 'highlight' option contains "si". In version 3.0, this meant to
+invert the status line. Now it should be "sr", reverse the status line, as
+"si" now stands for italic! If italic is not available on your terminal, the
+status line is inverted anyway; you will only see this problem on terminals
+that have termcap codes for italics.
+
+ *filler-lines*
+The lines after the last buffer line in a window are called filler lines. By
+default, these lines start with a tilde (~) character. The 'eob' item in the
+'fillchars' option can be used to change this character. By default, these
+characters are highlighted as NonText (|hl-NonText|). The EndOfBuffer
+highlight group (|hl-EndOfBuffer|) can be used to change the highlighting of
+the filler characters.
+
+==============================================================================
+3. Opening and closing a window *opening-window*
+
+CTRL-W s *CTRL-W_s*
+CTRL-W S *CTRL-W_S*
+CTRL-W CTRL-S *CTRL-W_CTRL-S*
+:[N]sp[lit] [++opt] [+cmd] [file] *:sp* *:split*
+ Split current window in two. The result is two viewports on
+ the same file.
+
+ Make the new window N high (default is to use half the height
+ of the current window). Reduces the current window height to
+ create room (and others, if the 'equalalways' option is set,
+ 'eadirection' isn't "hor", and one of them is higher than the
+ current or the new window).
+
+ If [file] is given it will be edited in the new window. If it
+ is not loaded in any buffer, it will be read. Else the new
+ window will use the already loaded buffer.
+
+ Note: CTRL-S does not work on all terminals and might block
+ further input, use CTRL-Q to get going again.
+ Also see |++opt| and |+cmd|.
+ *E242* *E1159*
+ Be careful when splitting a window in an autocommand, it may
+ mess up the window layout if this happens while making other
+ window layout changes.
+
+CTRL-W CTRL-V *CTRL-W_CTRL-V*
+CTRL-W v *CTRL-W_v*
+:[N]vs[plit] [++opt] [+cmd] [file] *:vs* *:vsplit*
+ Like |:split|, but split vertically. The windows will be
+ spread out horizontally if
+ 1. a width was not specified,
+ 2. 'equalalways' is set,
+ 3. 'eadirection' isn't "ver", and
+ 4. one of the other windows is wider than the current or new
+ window.
+ If N was given make the new window N columns wide, if
+ possible.
+ Note: In other places CTRL-Q does the same as CTRL-V, but here
+ it doesn't!
+
+CTRL-W n *CTRL-W_n*
+CTRL-W CTRL_N *CTRL-W_CTRL-N*
+:[N]new [++opt] [+cmd] *:new*
+ Create a new window and start editing an empty file in it.
+ Make new window N high (default is to use half the existing
+ height). Reduces the current window height to create room (and
+ others, if the 'equalalways' option is set and 'eadirection'
+ isn't "hor").
+ Also see |++opt| and |+cmd|.
+ If 'fileformats' is not empty, the first format given will be
+ used for the new buffer. If 'fileformats' is empty, the
+ 'fileformat' of the current buffer is used. This can be
+ overridden with the |++opt| argument.
+ Autocommands are executed in this order:
+ 1. WinLeave for the current window
+ 2. WinEnter for the new window
+ 3. BufLeave for the current buffer
+ 4. BufEnter for the new buffer
+ This behaves like a ":split" first, and then an ":enew"
+ command.
+
+:[N]new [++opt] [+cmd] {file}
+:[N]sp[lit] [++opt] [+cmd] {file} *:split_f*
+ Create a new window and start editing file {file} in it. This
+ behaves almost like a ":split" first, and then an ":edit"
+ command, but the alternate file name in the original window is
+ set to {file}.
+ If [+cmd] is given, execute the command when the file has been
+ loaded |+cmd|.
+ Also see |++opt|.
+ Make new window N high (default is to use half the existing
+ height). Reduces the current window height to create room
+ (and others, if the 'equalalways' option is set).
+
+:[N]vne[w] [++opt] [+cmd] [file] *:vne* *:vnew*
+ Like |:new|, but split vertically. If 'equalalways' is set
+ and 'eadirection' isn't "ver" the windows will be spread out
+ horizontally, unless a width was specified.
+
+:[N]sv[iew] [++opt] [+cmd] [file] *:sv* *:sview* *splitview*
+ Same as ":split", but set 'readonly' option for this buffer.
+
+:[N]sf[ind] [++opt] [+cmd] {file} *:sf* *:sfi* *:sfind* *splitfind*
+ Same as ":split", but search for {file} in 'path' like in
+ |:find|. Doesn't split if {file} is not found.
+
+CTRL-W CTRL-^ *CTRL-W_CTRL-^* *CTRL-W_^*
+CTRL-W ^ Split the current window in two and edit the alternate file.
+ When a count N is given, split the current window and edit
+ buffer N. Similar to ":sp #" and ":sp #N", but it allows the
+ other buffer to be unnamed. This command matches the behavior
+ of |CTRL-^|, except that it splits a window first.
+
+ *CTRL-W_:*
+CTRL-W : Does the same as typing |:| - enter a command line. Useful in a
+ terminal window, where all Vim commands must be preceded with
+ CTRL-W or 'termwinkey'.
+
+Note that the 'splitbelow' and 'splitright' options influence where a new
+window will appear.
+ *E36*
+Creating a window will fail if there is not enough room. Every window needs
+at least one screen line and column, sometimes more. Options 'winminheight'
+and 'winminwidth' are relevant.
+
+ *:vert* *:vertical*
+:vert[ical] {cmd}
+ Execute {cmd}. If it contains a command that splits a window,
+ it will be split vertically. For `vertical wincmd =` windows
+ will be equalized only vertically.
+ Doesn't work for |:execute| and |:normal|.
+
+ *:hor* *:horizontal*
+:hor[izontal] {cmd}
+ Execute {cmd}. Currently only makes a difference for
+ `horizontal wincmd =`, which will equalize windows only
+ horizontally.
+
+:lefta[bove] {cmd} *:lefta* *:leftabove*
+:abo[veleft] {cmd} *:abo* *:aboveleft*
+ Execute {cmd}. If it contains a command that splits a window,
+ it will be opened left (vertical split) or above (horizontal
+ split) the current window. Overrules 'splitbelow' and
+ 'splitright'.
+ Doesn't work for |:execute| and |:normal|.
+
+:rightb[elow] {cmd} *:rightb* *:rightbelow*
+:bel[owright] {cmd} *:bel* *:belowright*
+ Execute {cmd}. If it contains a command that splits a window,
+ it will be opened right (vertical split) or below (horizontal
+ split) the current window. Overrules 'splitbelow' and
+ 'splitright'.
+ Doesn't work for |:execute| and |:normal|.
+
+ *:topleft* *E442*
+:to[pleft] {cmd}
+ Execute {cmd}. If it contains a command that splits a window,
+ it will appear at the top and occupy the full width of the Vim
+ window. When the split is vertical the window appears at the
+ far left and occupies the full height of the Vim window.
+ Doesn't work for |:execute| and |:normal|.
+
+ *:bo* *:botright*
+:bo[tright] {cmd}
+ Execute {cmd}. If it contains a command that splits a window,
+ it will appear at the bottom and occupy the full width of the
+ Vim window. When the split is vertical the window appears at
+ the far right and occupies the full height of the Vim window.
+ Doesn't work for |:execute| and |:normal|.
+
+These command modifiers can be combined to make a vertically split window
+occupy the full height. Example: >
+ :vertical topleft split tags
+Opens a vertically split, full-height window on the "tags" file at the far
+left of the Vim window.
+
+
+Closing a window
+----------------
+
+:q[uit]
+:{count}q[uit] *:count_quit*
+CTRL-W q *CTRL-W_q*
+CTRL-W CTRL-Q *CTRL-W_CTRL-Q*
+ Without {count}: Quit the current window. If {count} is
+ given quit the {count} window.
+ *edit-window*
+ When quitting the last edit window (not counting help or
+ preview windows), exit Vim.
+
+ When 'hidden' is set, and there is only one window for the
+ current buffer, it becomes hidden. When 'hidden' is not set,
+ and there is only one window for the current buffer, and the
+ buffer was changed, the command fails.
+
+ (Note: CTRL-Q does not work on all terminals).
+
+ If [count] is greater than the last window number the last
+ window will be closed: >
+ :1quit " quit the first window
+ :$quit " quit the last window
+ :9quit " quit the last window
+ " if there are fewer than 9 windows opened
+ :-quit " quit the previous window
+ :+quit " quit the next window
+ :+2quit " quit the second next window
+<
+ When closing a help window, and this is not the only window,
+ Vim will try to restore the previous window layout, see
+ |:helpclose|.
+
+:q[uit]!
+:{count}q[uit]!
+ Without {count}: Quit the current window. If {count} is
+ given quit the {count} window.
+
+ If this was the last window for a buffer, any changes to that
+ buffer are lost. When quitting the last window (not counting
+ help windows), exit Vim. The contents of the buffer are lost,
+ even when 'hidden' is set.
+
+:clo[se][!]
+:{count}clo[se][!]
+CTRL-W c *CTRL-W_c* *:clo* *:close*
+ Without {count}: Close the current window. If {count} is
+ given close the {count} window.
+
+ When the 'hidden' option is set, or when the buffer was
+ changed and the [!] is used, the buffer becomes hidden (unless
+ there is another window editing it).
+
+ When there is only one |edit-window| in the current tab page
+ and there is another tab page, this closes the current tab
+ page. |tab-page|.
+
+ This command fails when: *E444*
+ - There is only one window on the screen.
+ - When 'hidden' is not set, [!] is not used, the buffer has
+ changes, and there is no other window on this buffer.
+ Changes to the buffer are not written and won't get lost, so
+ this is a "safe" command.
+
+CTRL-W CTRL-C *CTRL-W_CTRL-C*
+ You might have expected that CTRL-W CTRL-C closes the current
+ window, but that does not work, because the CTRL-C cancels the
+ command.
+
+ *:hide*
+:hid[e]
+:{count}hid[e]
+ Without {count}: Quit the current window, unless it is the
+ last window on the screen.
+ If {count} is given quit the {count} window.
+
+ The buffer becomes hidden (unless there is another window
+ editing it or 'bufhidden' is "unload", "delete" or "wipe").
+ If the window is the last one in the current tab page the tab
+ page is closed. |tab-page|
+
+ The value of 'hidden' is irrelevant for this command. Changes
+ to the buffer are not written and won't get lost, so this is a
+ "safe" command.
+
+:hid[e] {cmd} Execute {cmd} with 'hidden' is set. The previous value of
+ 'hidden' is restored after {cmd} has been executed.
+ Example: >
+ :hide edit Makefile
+< This will edit "Makefile", and hide the current buffer if it
+ has any changes.
+
+:on[ly][!]
+:{count}on[ly][!]
+CTRL-W o *CTRL-W_o* *E445*
+CTRL-W CTRL-O *CTRL-W_CTRL-O* *:on* *:only*
+ Make the current window the only one on the screen. All other
+ windows are closed. For {count} see the `:quit` command
+ above |:count_quit|.
+
+ When the 'hidden' option is set, all buffers in closed windows
+ become hidden.
+
+ When 'hidden' is not set, and the 'autowrite' option is set,
+ modified buffers are written. Otherwise, windows that have
+ buffers that are modified are not removed, unless the [!] is
+ given, then they become hidden. But modified buffers are
+ never abandoned, so changes cannot get lost.
+
+==============================================================================
+4. Moving cursor to other windows *window-move-cursor*
+
+CTRL-W <Down> *CTRL-W_<Down>*
+CTRL-W CTRL-J *CTRL-W_CTRL-J* *CTRL-W_j*
+CTRL-W j Move cursor to Nth window below current one. Uses the cursor
+ position to select between alternatives.
+
+CTRL-W <Up> *CTRL-W_<Up>*
+CTRL-W CTRL-K *CTRL-W_CTRL-K* *CTRL-W_k*
+CTRL-W k Move cursor to Nth window above current one. Uses the cursor
+ position to select between alternatives.
+
+CTRL-W <Left> *CTRL-W_<Left>*
+CTRL-W CTRL-H *CTRL-W_CTRL-H*
+CTRL-W <BS> *CTRL-W_<BS>* *CTRL-W_h*
+CTRL-W h Move cursor to Nth window left of current one. Uses the
+ cursor position to select between alternatives.
+
+CTRL-W <Right> *CTRL-W_<Right>*
+CTRL-W CTRL-L *CTRL-W_CTRL-L* *CTRL-W_l*
+CTRL-W l Move cursor to Nth window right of current one. Uses the
+ cursor position to select between alternatives.
+
+CTRL-W w *CTRL-W_w* *CTRL-W_CTRL-W*
+CTRL-W CTRL-W Without count: move cursor to window below/right of the
+ current one. If there is no window below or right, go to
+ top-left window.
+ With count: go to Nth window (windows are numbered from
+ top-left to bottom-right). To obtain the window number see
+ |bufwinnr()| and |winnr()|. When N is larger than the number
+ of windows go to the last window.
+
+ *CTRL-W_W*
+CTRL-W W Without count: move cursor to window above/left of current
+ one. If there is no window above or left, go to bottom-right
+ window. With count: go to Nth window, like with CTRL-W w.
+
+CTRL-W t *CTRL-W_t* *CTRL-W_CTRL-T*
+CTRL-W CTRL-T Move cursor to top-left window.
+
+CTRL-W b *CTRL-W_b* *CTRL-W_CTRL-B*
+CTRL-W CTRL-B Move cursor to bottom-right window.
+
+CTRL-W p *CTRL-W_p* *CTRL-W_CTRL-P*
+CTRL-W CTRL-P Go to previous (last accessed) window.
+
+ *CTRL-W_P* *E441*
+CTRL-W P Go to preview window. When there is no preview window this is
+ an error.
+ {not available when compiled without the |+quickfix| feature}
+
+If Visual mode is active and the new window is not for the same buffer, the
+Visual mode is ended. If the window is on the same buffer, the cursor
+position is set to keep the same Visual area selected.
+
+ *:winc* *:wincmd*
+These commands can also be executed with ":wincmd":
+
+:[count]winc[md] {arg}
+ Like executing CTRL-W [count] {arg}. Example: >
+ :wincmd j
+< Moves to the window below the current one.
+ This command is useful when a Normal mode cannot be used (for
+ the |CursorHold| autocommand event). Or when a Normal mode
+ command is inconvenient.
+ The count can also be a window number. Example: >
+ :exe nr .. "wincmd w"
+< This goes to window "nr".
+
+==============================================================================
+5. Moving windows around *window-moving*
+
+CTRL-W r *CTRL-W_r* *CTRL-W_CTRL-R* *E443*
+CTRL-W CTRL-R Rotate windows downwards/rightwards. The first window becomes
+ the second one, the second one becomes the third one, etc.
+ The last window becomes the first window. The cursor remains
+ in the same window.
+ This only works within the row or column of windows that the
+ current window is in.
+
+ *CTRL-W_R*
+CTRL-W R Rotate windows upwards/leftwards. The second window becomes
+ the first one, the third one becomes the second one, etc. The
+ first window becomes the last window. The cursor remains in
+ the same window.
+ This only works within the row or column of windows that the
+ current window is in.
+
+CTRL-W x *CTRL-W_x* *CTRL-W_CTRL-X*
+CTRL-W CTRL-X Without count: Exchange current window with next one. If there
+ is no next window, exchange with previous window.
+ With count: Exchange current window with Nth window (first
+ window is 1). The cursor is put in the other window.
+ When vertical and horizontal window splits are mixed, the
+ exchange is only done in the row or column of windows that the
+ current window is in.
+
+The following commands can be used to change the window layout. For example,
+when there are two vertically split windows, CTRL-W K will change that in
+horizontally split windows. CTRL-W H does it the other way around.
+
+ *CTRL-W_K*
+CTRL-W K Move the current window to be at the very top, using the full
+ width of the screen. This works like closing the current
+ window and then creating another one with ":topleft split",
+ except that the current window contents is used for the new
+ window.
+
+ *CTRL-W_J*
+CTRL-W J Move the current window to be at the very bottom, using the
+ full width of the screen. This works like closing the current
+ window and then creating another one with ":botright split",
+ except that the current window contents is used for the new
+ window.
+
+ *CTRL-W_H*
+CTRL-W H Move the current window to be at the far left, using the
+ full height of the screen. This works like closing the
+ current window and then creating another one with
+ `:vert topleft split`, except that the current window contents
+ is used for the new window.
+
+ *CTRL-W_L*
+CTRL-W L Move the current window to be at the far right, using the full
+ height of the screen. This works like closing the
+ current window and then creating another one with
+ `:vert botright split`, except that the current window
+ contents is used for the new window.
+
+ *CTRL-W_T*
+CTRL-W T Move the current window to a new tab page. This fails if
+ there is only one window in the current tab page.
+ When a count is specified the new tab page will be opened
+ before the tab page with this index. Otherwise it comes after
+ the current tab page.
+
+==============================================================================
+6. Window resizing *window-resize*
+
+ *CTRL-W_=*
+CTRL-W = Make all windows (almost) equally high and wide, but use
+ 'winheight' and 'winwidth' for the current window.
+ Windows with 'winfixheight' set keep their height and windows
+ with 'winfixwidth' set keep their width.
+ To equalize only vertically (make window equally high) use
+ `vertical wincmd =`.
+ To equalize only horizontally (make window equally wide) use
+ `horizontal wincmd =`.
+
+:res[ize] -N *:res* *:resize* *CTRL-W_-*
+CTRL-W - Decrease current window height by N (default 1).
+ If used after |:vertical|: decrease width by N.
+
+:res[ize] +N *CTRL-W_+*
+CTRL-W + Increase current window height by N (default 1).
+ If used after |:vertical|: increase width by N.
+
+:res[ize] [N]
+CTRL-W CTRL-_ *CTRL-W_CTRL-_* *CTRL-W__*
+CTRL-W _ Set current window height to N (default: highest possible).
+
+:{winnr}res[ize] [+-]N
+ Like `:resize` above, but apply the size to window {winnr}
+ instead of the current window.
+
+z{nr}<CR> Set current window height to {nr}.
+
+ *CTRL-W_<*
+CTRL-W < Decrease current window width by N (default 1).
+
+ *CTRL-W_>*
+CTRL-W > Increase current window width by N (default 1).
+
+:vert[ical] res[ize] [N] *:vertical-resize* *CTRL-W_bar*
+CTRL-W | Set current window width to N (default: widest possible).
+
+You can also resize a window by dragging a status line up or down with the
+mouse. Or by dragging a vertical separator line left or right. This only
+works if the version of Vim that is being used supports the mouse and the
+'mouse' option has been set to enable it.
+
+The option 'winheight' ('wh') is used to set the minimal window height of the
+current window. This option is used each time another window becomes the
+current window. If the option is '0', it is disabled. Set 'winheight' to a
+very large value, e.g., '9999', to make the current window always fill all
+available space. Set it to a reasonable value, e.g., '10', to make editing in
+the current window comfortable.
+
+The equivalent 'winwidth' ('wiw') option is used to set the minimal width of
+the current window.
+
+When the option 'equalalways' ('ea') is set, all the windows are automatically
+made the same size after splitting or closing a window. If you don't set this
+option, splitting a window will reduce the size of the current window and
+leave the other windows the same. When closing a window, the extra lines are
+given to the window above it.
+
+The 'eadirection' option limits the direction in which the 'equalalways'
+option is applied. The default "both" resizes in both directions. When the
+value is "ver" only the heights of windows are equalized. Use this when you
+have manually resized a vertically split window and want to keep this width.
+Likewise, "hor" causes only the widths of windows to be equalized.
+
+The option 'cmdheight' ('ch') is used to set the height of the command-line.
+If you are annoyed by the |hit-enter| prompt for long messages, set this
+option to 2 or 3.
+
+If there is only one window, resizing that window will also change the command
+line height. If there are several windows, resizing the current window will
+also change the height of the window below it (and sometimes the window above
+it).
+
+The minimal height and width of a window is set with 'winminheight' and
+'winminwidth'. These are hard values, a window will never become smaller.
+
+
+WinScrolled and WinResized autocommands ~
+ *win-scrolled-resized*
+If you want to get notified of changes in window sizes, the |WinResized|
+autocommand event can be used.
+If you want to get notified of text in windows scrolling vertically or
+horizontally, the |WinScrolled| autocommand event can be used. This will also
+trigger in window size changes.
+Exception: the events will not be triggered when the text scrolls for
+'incsearch'.
+ *WinResized-event*
+The |WinResized| event is triggered after updating the display, several
+windows may have changed size then. A list of the IDs of windows that changed
+since last time is provided in the v:event.windows variable, for example:
+ [1003, 1006]
+ *WinScrolled-event*
+The |WinScrolled| event is triggered after |WinResized|, and also if a window
+was scrolled. That can be vertically (the text at the top of the window
+changed) or horizontally (when 'wrap' is off or when the first displayed part
+of the first line changes). Note that |WinScrolled| will trigger many more
+times than |WinResized|, it may slow down editing a bit.
+
+The information provided by |WinScrolled| is a dictionary for each window that
+has changes, using the window ID as the key, and a total count of the changes
+with the key "all". Example value for |v:event| (|Vim9| syntax):
+ {
+ all: {width: 0, height: 2, leftcol: 0, skipcol: 0, topline: 1, topfill: 0},
+ 1003: {width: 0, height: -1, leftcol: 0, skipcol: 0, topline: 0, topfill: 0},
+ 1006: {width: 0, height: 1, leftcol: 0, skipcol: 0, topline: 1, topfill: 0},
+ }
+
+Note that the "all" entry has the absolute values of the individual windows
+accumulated.
+
+If you need more information about what changed, or you want to "debounce" the
+events (not handle every event to avoid doing too much work), you may want to
+use the `winlayout()` and `getwininfo()` functions.
+
+|WinScrolled| and |WinResized| do not trigger when the first autocommand is
+added, only after the first scroll or resize. They may trigger when switching
+to another tab page.
+
+The commands executed are expected to not cause window size or scroll changes.
+If this happens anyway, the event will trigger again very soon. In other
+words: Just before triggering the event, the current sizes and scroll
+positions are stored and used to decide whether there was a change.
+ *E1312*
+It is not allowed to change the window layout here (split, close or move
+windows).
+
+==============================================================================
+7. Argument and buffer list commands *buffer-list*
+
+ args list buffer list meaning ~
+1. :[N]argument [N] 11. :[N]buffer [N] to arg/buf N
+2. :[N]next [file ..] 12. :[N]bnext [N] to Nth next arg/buf
+3. :[N]Next [N] 13. :[N]bNext [N] to Nth previous arg/buf
+4. :[N]previous [N] 14. :[N]bprevious [N] to Nth previous arg/buf
+5. :rewind / :first 15. :brewind / :bfirst to first arg/buf
+6. :last 16. :blast to last arg/buf
+7. :all 17. :ball edit all args/buffers
+ 18. :unhide edit all loaded buffers
+ 19. :[N]bmod [N] to Nth modified buf
+
+ split & args list split & buffer list meaning ~
+21. :[N]sargument [N] 31. :[N]sbuffer [N] split + to arg/buf N
+22. :[N]snext [file ..] 32. :[N]sbnext [N] split + to Nth next arg/buf
+23. :[N]sNext [N] 33. :[N]sbNext [N] split + to Nth previous arg/buf
+24. :[N]sprevious [N] 34. :[N]sbprevious [N] split + to Nth previous arg/buf
+25. :srewind / :sfirst 35. :sbrewind / :sbfirst split + to first arg/buf
+26. :slast 36. :sblast split + to last arg/buf
+27. :sall 37. :sball edit all args/buffers
+ 38. :sunhide edit all loaded buffers
+ 39. :[N]sbmod [N] split + to Nth modified buf
+
+40. :args list of arguments
+41. :buffers list of buffers
+
+The meaning of [N] depends on the command:
+ [N] is the number of buffers to go forward/backward on 2/12/22/32,
+ 3/13/23/33, and 4/14/24/34
+ [N] is an argument number, defaulting to current argument, for 1 and 21
+ [N] is a buffer number, defaulting to current buffer, for 11 and 31
+ [N] is a count for 19 and 39
+
+Note: ":next" is an exception, because it must accept a list of file names
+for compatibility with Vi.
+
+
+The argument list and multiple windows
+--------------------------------------
+
+The current position in the argument list can be different for each window.
+Remember that when doing ":e file", the position in the argument list stays
+the same, but you are not editing the file at that position. To indicate
+this, the file message (and the title, if you have one) shows
+"(file (N) of M)", where "(N)" is the current position in the file list, and
+"M" the number of files in the file list.
+
+All the entries in the argument list are added to the buffer list. Thus, you
+can also get to them with the buffer list commands, like ":bnext".
+
+:[N]al[l][!] [N] *:al* *:all* *:sal* *:sall*
+:[N]sal[l][!] [N]
+ Rearrange the screen to open one window for each argument.
+ All other windows are closed. When a count is given, this is
+ the maximum number of windows to open.
+ With the |:tab| modifier open a tab page for each argument.
+ When there are more arguments than 'tabpagemax' further ones
+ become split windows in the last tab page.
+ When the 'hidden' option is set, all buffers in closed windows
+ become hidden.
+ When 'hidden' is not set, and the 'autowrite' option is set,
+ modified buffers are written. Otherwise, windows that have
+ buffers that are modified are not removed, unless the [!] is
+ given, then they become hidden. But modified buffers are
+ never abandoned, so changes cannot get lost.
+ [N] is the maximum number of windows to open. 'winheight'
+ also limits the number of windows opened ('winwidth' if
+ |:vertical| was prepended).
+ Buf/Win Enter/Leave autocommands are not executed for the new
+ windows here, that's only done when they are really entered.
+ If autocommands change the window layout while this command is
+ busy an error will be given. *E249*
+
+:[N]sa[rgument][!] [++opt] [+cmd] [N] *:sa* *:sargument*
+ Short for ":split | argument [N]": split window and go to Nth
+ argument. But when there is no such argument, the window is
+ not split. Also see |++opt| and |+cmd|.
+
+:[N]sn[ext][!] [++opt] [+cmd] [file ..] *:sn* *:snext*
+ Short for ":split | [N]next": split window and go to Nth next
+ argument. But when there is no next file, the window is not
+ split. Also see |++opt| and |+cmd|.
+
+:[N]spr[evious][!] [++opt] [+cmd] [N] *:spr* *:sprevious*
+:[N]sN[ext][!] [++opt] [+cmd] [N] *:sN* *:sNext*
+ Short for ":split | [N]Next": split window and go to Nth
+ previous argument. But when there is no previous file, the
+ window is not split. Also see |++opt| and |+cmd|.
+
+ *:sre* *:srewind*
+:sre[wind][!] [++opt] [+cmd]
+ Short for ":split | rewind": split window and go to first
+ argument. But when there is no argument list, the window is
+ not split. Also see |++opt| and |+cmd|.
+
+ *:sfir* *:sfirst*
+:sfir[st] [++opt] [+cmd]
+ Same as ":srewind".
+
+ *:sla* *:slast*
+:sla[st][!] [++opt] [+cmd]
+ Short for ":split | last": split window and go to last
+ argument. But when there is no argument list, the window is
+ not split. Also see |++opt| and |+cmd|.
+
+ *:dr* *:drop*
+:dr[op] [++opt] [+cmd] {file} ..
+ Edit the first {file} in a window.
+ - If the file is already open in a window change to that
+ window.
+ - If the file is not open in a window edit the file in the
+ current window. If the current buffer can't be |abandon|ed,
+ the window is split first.
+ - Windows that are not in the argument list or are not full
+ width will be closed if possible.
+ The |argument-list| is set, like with the |:next| command.
+ The purpose of this command is that it can be used from a
+ program that wants Vim to edit another file, e.g., a debugger.
+ When using the |:tab| modifier each argument is opened in a
+ tab page. The last window is used if it's empty.
+ Also see |++opt| and |+cmd|.
+
+==============================================================================
+8. Do a command in all buffers or windows *list-repeat*
+
+ *:windo*
+:[range]windo {cmd} Execute {cmd} in each window or if [range] is given
+ only in windows for which the window number lies in
+ the [range]. It works like doing this: >
+ CTRL-W t
+ :{cmd}
+ CTRL-W w
+ :{cmd}
+ etc.
+< This only operates in the current tab page.
+ When an error is detected on one window, further
+ windows will not be visited.
+ The last window (or where an error occurred) becomes
+ the current window.
+ {cmd} can contain '|' to concatenate several commands.
+ {cmd} must not open or close windows or reorder them.
+
+ Also see |:tabdo|, |:argdo|, |:bufdo|, |:cdo|, |:ldo|,
+ |:cfdo| and |:lfdo|
+
+ *:bufdo*
+:[range]bufdo[!] {cmd} Execute {cmd} in each buffer in the buffer list or if
+ [range] is given only for buffers for which their
+ buffer number is in the [range]. It works like doing
+ this: >
+ :bfirst
+ :{cmd}
+ :bnext
+ :{cmd}
+ etc.
+< When the current file can't be |abandon|ed and the [!]
+ is not present, the command fails.
+ When an error is detected on one buffer, further
+ buffers will not be visited.
+ Unlisted buffers are skipped.
+ The last buffer (or where an error occurred) becomes
+ the current buffer.
+ {cmd} can contain '|' to concatenate several commands.
+ {cmd} must not delete buffers or add buffers to the
+ buffer list.
+ Note: While this command is executing, the Syntax
+ autocommand event is disabled by adding it to
+ 'eventignore'. This considerably speeds up editing
+ each buffer.
+
+ Also see |:tabdo|, |:argdo|, |:windo|, |:cdo|, |:ldo|,
+ |:cfdo| and |:lfdo|
+
+Examples: >
+
+ :windo set nolist foldcolumn=0 | normal! zn
+
+This resets the 'list' option and disables folding in all windows. >
+
+ :bufdo set fileencoding= | update
+
+This resets the 'fileencoding' in each buffer and writes it if this changed
+the buffer. The result is that all buffers will use the 'encoding' encoding
+(if conversion succeeds).
+
+==============================================================================
+9. Tag or file name under the cursor *window-tag*
+
+ *:sta* *:stag*
+:sta[g][!] [tagname]
+ Does ":tag[!] [tagname]" and splits the window for the found
+ tag. See also |:tag|.
+
+CTRL-W ] *CTRL-W_]* *CTRL-W_CTRL-]*
+CTRL-W CTRL-] Split current window in two. Use identifier under cursor as a
+ tag and jump to it in the new upper window.
+ In Visual mode uses the Visually selected text as a tag.
+ Make new window N high.
+
+ *CTRL-W_g]*
+CTRL-W g ] Split current window in two. Use identifier under cursor as a
+ tag and perform ":tselect" on it in the new upper window.
+ In Visual mode uses the Visually selected text as a tag.
+ Make new window N high.
+
+ *CTRL-W_g_CTRL-]*
+CTRL-W g CTRL-] Split current window in two. Use identifier under cursor as a
+ tag and perform ":tjump" on it in the new upper window.
+ In Visual mode uses the Visually selected text as a tag.
+ Make new window N high.
+
+CTRL-W f *CTRL-W_f* *CTRL-W_CTRL-F*
+CTRL-W CTRL-F Split current window in two. Edit file name under cursor.
+ Like ":split gf", but window isn't split if the file does not
+ exist.
+ Uses the 'path' variable as a list of directory names where to
+ look for the file. Also the path for current file is
+ used to search for the file name.
+ If the name is a hypertext link that looks like
+ "type://machine/path", only "/path" is used.
+ If a count is given, the count'th matching file is edited.
+
+CTRL-W F *CTRL-W_F*
+ Split current window in two. Edit file name under cursor and
+ jump to the line number following the file name. See |gF| for
+ details on how the line number is obtained.
+
+CTRL-W gf *CTRL-W_gf*
+ Open a new tab page and edit the file name under the cursor.
+ Like "tab split" and "gf", but the new tab page isn't created
+ if the file does not exist.
+
+CTRL-W gF *CTRL-W_gF*
+ Open a new tab page and edit the file name under the cursor
+ and jump to the line number following the file name. Like
+ "tab split" and "gF", but the new tab page isn't created if
+ the file does not exist.
+
+CTRL-W gt *CTRL-W_gt*
+ Go to next tab page, same as `gt`.
+
+CTRL-W gT *CTRL-W_gT*
+ Go to previous tab page, same as `gT`.
+
+Also see |CTRL-W_CTRL-I|: open window for an included file that includes
+the keyword under the cursor.
+
+==============================================================================
+10. The preview window *preview-window*
+
+The preview window is a special window to show (preview) another file. It is
+normally a small window used to show an include file or definition of a
+function.
+{not available when compiled without the |+quickfix| feature}
+
+There can be only one preview window (per tab page). It is created with one
+of the commands below. The 'previewheight' option can be set to specify the
+height of the preview window when it's opened. The 'previewwindow' option is
+set in the preview window to be able to recognize it. The 'winfixheight'
+option is set to have it keep the same height when opening/closing other
+windows.
+ *preview-popup*
+Alternatively, a popup window can be used by setting the 'previewpopup'
+option. When set, it overrules the 'previewwindow' and 'previewheight'
+settings. The option is a comma-separated list of values:
+ height maximum height of the popup
+ width maximum width of the popup
+ highlight highlight group of the popup (default is Pmenu)
+Example: >
+ :set previewpopup=height:10,width:60
+
+A few peculiarities:
+- If the file is in a buffer already, it will be re-used. This will allow for
+ editing the file while it's visible in the popup window.
+- No ATTENTION dialog will be used, since you can't edit the file in the popup
+ window. However, if you later open the same buffer in a normal window, you
+ may not notice it's edited elsewhere. And when then using ":edit" to
+ trigger the ATTENTION and responding "A" for Abort, the preview window will
+ become empty.
+
+ *:pta* *:ptag*
+:pta[g][!] [tagname]
+ Does ":tag[!] [tagname]" and shows the found tag in a
+ "Preview" window without changing the current buffer or cursor
+ position. If a "Preview" window already exists, it is re-used
+ (like a help window is). If a new one is opened,
+ 'previewheight' is used for the height of the window. See
+ also |:tag|.
+ See below for an example. |CursorHold-example|
+ Small difference from |:tag|: When [tagname] is equal to the
+ already displayed tag, the position in the matching tag list
+ is not reset. This makes the CursorHold example work after a
+ |:ptnext|.
+
+CTRL-W z *CTRL-W_z*
+CTRL-W CTRL-Z *CTRL-W_CTRL-Z* *:pc* *:pclose*
+:pc[lose][!] Close any "Preview" window currently open. When the 'hidden'
+ option is set, or when the buffer was changed and the [!] is
+ used, the buffer becomes hidden (unless there is another
+ window editing it). The command fails if any "Preview" buffer
+ cannot be closed. See also |:close|.
+
+ *:pp* *:ppop*
+:[count]pp[op][!]
+ Does ":[count]pop[!]" in the preview window. See |:pop| and
+ |:ptag|.
+
+CTRL-W } *CTRL-W_}*
+ Use identifier under cursor as a tag and perform a :ptag on
+ it. Make the new Preview window (if required) N high. If N is
+ not given, 'previewheight' is used.
+
+CTRL-W g } *CTRL-W_g}*
+ Use identifier under cursor as a tag and perform a :ptjump on
+ it. Make the new Preview window (if required) N high. If N is
+ not given, 'previewheight' is used.
+
+ *:ped* *:pedit*
+:ped[it][!] [++opt] [+cmd] {file}
+ Edit {file} in the preview window. The preview window is
+ opened like with |:ptag|. The current window and cursor
+ position isn't changed. Useful example: >
+ :pedit +/fputc /usr/include/stdio.h
+<
+ *:ps* *:psearch*
+:[range]ps[earch][!] [count] [/]pattern[/]
+ Works like |:ijump| but shows the found match in the preview
+ window. The preview window is opened like with |:ptag|. The
+ current window and cursor position isn't changed. Useful
+ example: >
+ :psearch popen
+< Like with the |:ptag| command, you can use this to
+ automatically show information about the word under the
+ cursor. This is less clever than using |:ptag|, but you don't
+ need a tags file and it will also find matches in system
+ include files. Example: >
+ :au! CursorHold *.[ch] ++nested exe "silent! psearch " .. expand("<cword>")
+< Warning: This can be slow.
+
+Example *CursorHold-example* >
+
+ :au! CursorHold *.[ch] ++nested exe "silent! ptag " .. expand("<cword>")
+
+This will cause a ":ptag" to be executed for the keyword under the cursor,
+when the cursor hasn't moved for the time set with 'updatetime'. The "nested"
+makes other autocommands be executed, so that syntax highlighting works in the
+preview window. The "silent!" avoids an error message when the tag could not
+be found. Also see |CursorHold|. To disable this again: >
+
+ :au! CursorHold
+
+A nice addition is to highlight the found tag, avoid the ":ptag" when there
+is no word under the cursor, and a few other things: >
+
+ :au! CursorHold *.[ch] ++nested call PreviewWord()
+ :func PreviewWord()
+ : if &previewwindow " don't do this in the preview window
+ : return
+ : endif
+ : let w = expand("<cword>") " get the word under cursor
+ : if w =~ '\a' " if the word contains a letter
+ :
+ : " Delete any existing highlight before showing another tag
+ : silent! wincmd P " jump to preview window
+ : if &previewwindow " if we really get there...
+ : match none " delete existing highlight
+ : wincmd p " back to old window
+ : endif
+ :
+ : " Try displaying a matching tag for the word under the cursor
+ : try
+ : exe "ptag " .. w
+ : catch
+ : return
+ : endtry
+ :
+ : silent! wincmd P " jump to preview window
+ : if &previewwindow " if we really get there...
+ : if has("folding")
+ : silent! .foldopen " don't want a closed fold
+ : endif
+ : call search("$", "b") " to end of previous line
+ : let w = substitute(w, '\\', '\\\\', "")
+ : call search('\<\V' .. w .. '\>') " position cursor on match
+ : " Add a match highlight to the word at this position
+ : hi previewWord term=bold ctermbg=green guibg=green
+ : exe 'match previewWord "\%' .. line(".") .. 'l\%' .. col(".") .. 'c\k*"'
+ : wincmd p " back to old window
+ : endif
+ : endif
+ :endfun
+
+==============================================================================
+11. Using hidden buffers *buffer-hidden*
+
+A hidden buffer is not displayed in a window, but is still loaded into memory.
+This makes it possible to jump from file to file, without the need to read or
+write the file every time you get another buffer in a window.
+
+ *:buffer-!*
+If the option 'hidden' ('hid') is set, abandoned buffers are kept for all
+commands that start editing another file: ":edit", ":next", ":tag", etc. The
+commands that move through the buffer list sometimes make the current buffer
+hidden although the 'hidden' option is not set. This happens when a buffer is
+modified, but is forced (with '!') to be removed from a window, and
+'autowrite' is off or the buffer can't be written.
+
+You can make a hidden buffer not hidden by starting to edit it with any
+command, or by deleting it with the ":bdelete" command.
+
+The 'hidden' is global, it is used for all buffers. The 'bufhidden' option
+can be used to make an exception for a specific buffer. It can take these
+values:
+ <empty> Use the value of 'hidden'.
+ hide Hide this buffer, also when 'hidden' is not set.
+ unload Don't hide but unload this buffer, also when 'hidden'
+ is set.
+ delete Delete the buffer.
+
+ *hidden-quit*
+When you try to quit Vim while there is a hidden, modified buffer, you will
+get an error message and Vim will make that buffer the current buffer. You
+can then decide to write this buffer (":wq") or quit without writing (":q!").
+Be careful: there may be more hidden, modified buffers!
+
+A buffer can also be unlisted. This means it exists, but it is not in the
+list of buffers. |unlisted-buffer|
+
+
+:files[!] [flags] *:files*
+:buffers[!] [flags] *:buffers* *:ls*
+:ls[!] [flags]
+ Show all buffers. Example:
+
+ 1 #h "/test/text" line 1 ~
+ 2u "asdf" line 0 ~
+ 3 %a + "version.c" line 1 ~
+
+ When the [!] is included the list will show unlisted buffers
+ (the term "unlisted" is a bit confusing then...).
+
+ Each buffer has a unique number. That number will not change,
+ thus you can always go to a specific buffer with ":buffer N"
+ or "N CTRL-^", where N is the buffer number.
+
+ For the file name these special values are used:
+ [Prompt] |prompt-buffer|
+ [Popup] buffer of a |popup-window|
+ [Scratch] 'buftype' is "nofile"
+ [No Name] no file name specified
+ For a |terminal-window| buffer the status is used.
+
+ Indicators (chars in the same column are mutually exclusive):
+ u an unlisted buffer (only displayed when [!] is used)
+ |unlisted-buffer|
+ % the buffer in the current window
+ # the alternate buffer for ":e #" and CTRL-^
+ a an active buffer: it is loaded and visible
+ h a hidden buffer: It is loaded, but currently not
+ displayed in a window |hidden-buffer|
+ - a buffer with 'modifiable' off
+ = a readonly buffer
+ R a terminal buffer with a running job
+ F a terminal buffer with a finished job
+ ? a terminal buffer without a job: `:terminal NONE`
+ + a modified buffer
+ x a buffer with read errors
+
+ [flags] can be a combination of the following characters,
+ which restrict the buffers to be listed:
+ + modified buffers
+ - buffers with 'modifiable' off
+ = readonly buffers
+ a active buffers
+ u unlisted buffers (overrides the "!")
+ h hidden buffers
+ x buffers with a read error
+ % current buffer
+ # alternate buffer
+ R terminal buffers with a running job
+ F terminal buffers with a finished job
+ ? terminal buffers without a job: `:terminal NONE`
+ t show time last used and sort buffers
+ Combining flags means they are "and"ed together, e.g.:
+ h+ hidden buffers which are modified
+ a+ active buffers which are modified
+
+ When using |:filter| the pattern is matched against the
+ displayed buffer name, e.g.: >
+ filter /\.vim/ ls
+<
+ *:bad* *:badd*
+:bad[d] [+lnum] {fname}
+ Add file name {fname} to the buffer list, without loading it,
+ if it wasn't listed yet. If the buffer was previously
+ deleted, not wiped, it will be made listed again.
+ If "lnum" is specified, the cursor will be positioned at that
+ line when the buffer is first entered. Note that other
+ commands after the + will be ignored.
+
+ *:balt*
+:balt [+lnum] {fname}
+ Like `:badd` and also set the alternate file for the current
+ window to {fname}.
+
+:[N]bd[elete][!] *:bd* *:bdel* *:bdelete* *E516*
+:bd[elete][!] [N]
+ Unload buffer [N] (default: current buffer) and delete it from
+ the buffer list. If the buffer was changed, this fails,
+ unless when [!] is specified, in which case changes are lost.
+ The file remains unaffected. Any windows for this buffer are
+ closed. If buffer [N] is the current buffer, another buffer
+ will be displayed instead. This is the most recent entry in
+ the jump list that points into a loaded buffer.
+ Actually, the buffer isn't completely deleted, it is removed
+ from the buffer list |unlisted-buffer| and option values,
+ variables and mappings/abbreviations for the buffer are
+ cleared. Examples: >
+ :.,$-bdelete " delete buffers from the current one to
+ " last but one
+ :%bdelete " delete all buffers
+<
+
+:bdelete[!] {bufname} *E93* *E94*
+ Like ":bdelete[!] [N]", but buffer given by name, see
+ |{bufname}|.
+
+:bdelete[!] N1 N2 ...
+ Do ":bdelete[!]" for buffer N1, N2, etc. The arguments can be
+ buffer numbers or buffer names (but not buffer names that are
+ a number). Insert a backslash before a space in a buffer
+ name.
+
+:N,Mbdelete[!] Do ":bdelete[!]" for all buffers in the range N to M
+ |inclusive|.
+
+:[N]bw[ipeout][!] *:bw* *:bwipe* *:bwipeout* *E517*
+:bw[ipeout][!] {bufname}
+:N,Mbw[ipeout][!]
+:bw[ipeout][!] N1 N2 ...
+ Like |:bdelete|, but really delete the buffer. Everything
+ related to the buffer is lost. All marks in this buffer
+ become invalid, option settings are lost, etc. Don't use this
+ unless you know what you are doing. Examples: >
+ :.+,$bwipeout " wipe out all buffers after the current
+ " one
+ :%bwipeout " wipe out all buffers
+<
+
+:[N]bun[load][!] *:bun* *:bunload* *E515*
+:bun[load][!] [N]
+ Unload buffer [N] (default: current buffer). The memory
+ allocated for this buffer will be freed. The buffer remains
+ in the buffer list.
+ If the buffer was changed, this fails, unless when [!] is
+ specified, in which case the changes are lost.
+ Any windows for this buffer are closed. If buffer [N] is the
+ current buffer, another buffer will be displayed instead.
+ This is the most recent entry in the jump list that points
+ into a loaded buffer.
+
+:bunload[!] {bufname}
+ Like ":bunload[!] [N]", but buffer given by name.
+ Also see |{bufname}|.
+
+:N,Mbunload[!] Do ":bunload[!]" for all buffers in the range N to M
+ |inclusive|.
+
+:bunload[!] N1 N2 ...
+ Do ":bunload[!]" for buffer N1, N2, etc. The arguments can be
+ buffer numbers or buffer names (but not buffer names that are
+ a number). Insert a backslash before a space in a buffer
+ name.
+
+:[N]b[uffer][!] [+cmd] [N] *:b* *:bu* *:buf* *:buffer* *E86*
+ Edit buffer [N] from the buffer list. If [N] is not given,
+ the current buffer remains being edited. See |:buffer-!| for
+ [!]. This will also edit a buffer that is not in the buffer
+ list, without setting the 'buflisted' flag.
+ The notation with single quotes does not work here,
+ `:buf 12'345'` uses 12'345 as a buffer name.
+ Also see |+cmd|.
+
+:[N]b[uffer][!] [+cmd] {bufname} *{bufname}*
+ Edit buffer for {bufname} from the buffer list. A partial
+ name also works, so long as it is unique in the list of
+ buffers.
+ Note that a buffer whose name is a number cannot be referenced
+ by that name; use the buffer number instead.
+ Insert a backslash before a space in a buffer name.
+ See |:buffer-!| for [!].
+ This will also edit a buffer that is not in the buffer list,
+ without setting the 'buflisted' flag.
+ Also see |+cmd|.
+
+:[N]sb[uffer] [+cmd] [N] *:sb* *:sbuffer*
+ Split window and edit buffer [N] from the buffer list. If [N]
+ is not given, the current buffer is edited. Respects the
+ "useopen" setting of 'switchbuf' when splitting. This will
+ also edit a buffer that is not in the buffer list, without
+ setting the 'buflisted' flag.
+ Also see |+cmd|.
+
+:[N]sb[uffer] [+cmd] {bufname}
+ Split window and edit buffer for |{bufname}| from the buffer
+ list. This will also edit a buffer that is not in the buffer
+ list, without setting the 'buflisted' flag.
+ Note: If what you want to do is split the buffer, make a copy
+ under another name, you can do it this way: >
+ :w foobar | sp #
+< Also see |+cmd|.
+
+:[N]bn[ext][!] [+cmd] [N] *:bn* *:bnext* *E87*
+ Go to [N]th next buffer in buffer list. [N] defaults to one.
+ Wraps around the end of the buffer list.
+ See |:buffer-!| for [!].
+ Also see |+cmd|.
+ If you are in a help buffer, this takes you to the next help
+ buffer (if there is one). Similarly, if you are in a normal
+ (non-help) buffer, this takes you to the next normal buffer.
+ This is so that if you have invoked help, it doesn't get in
+ the way when you're browsing code/text buffers. The next three
+ commands also work like this.
+
+ *:sbn* *:sbnext*
+:[N]sbn[ext] [+cmd] [N]
+ Split window and go to [N]th next buffer in buffer list.
+ Wraps around the end of the buffer list. Uses 'switchbuf'
+ Also see |+cmd|.
+
+:[N]bN[ext][!] [+cmd] [N] *:bN* *:bNext* *:bp* *:bprevious* *E88*
+:[N]bp[revious][!] [+cmd] [N]
+ Go to [N]th previous buffer in buffer list. [N] defaults to
+ one. Wraps around the start of the buffer list.
+ See |:buffer-!| for [!] and 'switchbuf'.
+ Also see |+cmd|.
+
+:[N]sbN[ext] [+cmd] [N] *:sbN* *:sbNext* *:sbp* *:sbprevious*
+:[N]sbp[revious] [+cmd] [N]
+ Split window and go to [N]th previous buffer in buffer list.
+ Wraps around the start of the buffer list.
+ Uses 'switchbuf'.
+ Also see |+cmd|.
+
+:br[ewind][!] [+cmd] *:br* *:bre* *:brewind*
+ Go to first buffer in buffer list. If the buffer list is
+ empty, go to the first unlisted buffer.
+ See |:buffer-!| for [!].
+
+:bf[irst] [+cmd] *:bf* *:bfirst*
+ Same as |:brewind|.
+ Also see |+cmd|.
+
+:sbr[ewind] [+cmd] *:sbr* *:sbrewind*
+ Split window and go to first buffer in buffer list. If the
+ buffer list is empty, go to the first unlisted buffer.
+ Respects the 'switchbuf' option.
+ Also see |+cmd|.
+
+:sbf[irst] [+cmd] *:sbf* *:sbfirst*
+ Same as ":sbrewind".
+
+:bl[ast][!] [+cmd] *:bl* *:blast*
+ Go to last buffer in buffer list. If the buffer list is
+ empty, go to the last unlisted buffer.
+ See |:buffer-!| for [!].
+
+:sbl[ast] [+cmd] *:sbl* *:sblast*
+ Split window and go to last buffer in buffer list. If the
+ buffer list is empty, go to the last unlisted buffer.
+ Respects 'switchbuf' option.
+
+:[N]bm[odified][!] [+cmd] [N] *:bm* *:bmodified* *E84*
+ Go to [N]th next modified buffer. Note: this command also
+ finds unlisted buffers. If there is no modified buffer the
+ command fails.
+
+:[N]sbm[odified] [+cmd] [N] *:sbm* *:sbmodified*
+ Split window and go to [N]th next modified buffer.
+ Respects 'switchbuf' option.
+ Note: this command also finds buffers not in the buffer list.
+
+:[N]unh[ide] [N] *:unh* *:unhide* *:sun* *:sunhide*
+:[N]sun[hide] [N]
+ Rearrange the screen to open one window for each loaded buffer
+ in the buffer list. When a count is given, this is the
+ maximum number of windows to open.
+
+:[N]ba[ll] [N] *:ba* *:ball* *:sba* *:sball*
+:[N]sba[ll] [N] Rearrange the screen to open one window for each buffer in
+ the buffer list. When a count is given, this is the maximum
+ number of windows to open. 'winheight' also limits the number
+ of windows opened ('winwidth' if |:vertical| was prepended).
+ Buf/Win Enter/Leave autocommands are not executed for the new
+ windows here, that's only done when they are really entered.
+ When the |:tab| modifier is used new windows are opened in a
+ new tab, up to 'tabpagemax'.
+
+Note: All the commands above that start editing another buffer, keep the
+'readonly' flag as it was. This differs from the ":edit" command, which sets
+the 'readonly' flag each time the file is read.
+
+==============================================================================
+12. Special kinds of buffers *special-buffers*
+
+Instead of containing the text of a file, buffers can also be used for other
+purposes. A few options can be set to change the behavior of a buffer:
+ 'bufhidden' what happens when the buffer is no longer displayed
+ in a window.
+ 'buftype' what kind of a buffer this is
+ 'swapfile' whether the buffer will have a swap file
+ 'buflisted' buffer shows up in the buffer list
+
+A few useful kinds of a buffer:
+
+quickfix Used to contain the error list or the location list. See
+ |:cwindow| and |:lwindow|. This command sets the 'buftype'
+ option to "quickfix". You are not supposed to change this!
+ 'swapfile' is off.
+
+help Contains a help file. Will only be created with the |:help|
+ command. The flag that indicates a help buffer is internal
+ and can't be changed. The 'buflisted' option will be reset
+ for a help buffer.
+
+terminal A terminal window buffer, see |terminal|. The contents cannot
+ be read or changed until the job ends.
+
+directory Displays directory contents. Can be used by a file explorer
+ plugin. The buffer is created with these settings: >
+ :setlocal buftype=nowrite
+ :setlocal bufhidden=delete
+ :setlocal noswapfile
+< The buffer name is the name of the directory and is adjusted
+ when using the |:cd| command.
+
+ *scratch-buffer*
+scratch Contains text that can be discarded at any time. It is kept
+ when closing the window, it must be deleted explicitly.
+ Settings: >
+ :setlocal buftype=nofile
+ :setlocal bufhidden=hide
+ :setlocal noswapfile
+< The buffer name can be used to identify the buffer, if you
+ give it a meaningful name.
+
+ *unlisted-buffer*
+unlisted The buffer is not in the buffer list. It is not used for
+ normal editing, but to show a help file, remember a file name
+ or marks. The ":bdelete" command will also set this option,
+ thus it doesn't completely delete the buffer. Settings: >
+ :setlocal nobuflisted
+<
+
+ vim:tw=78:ts=8:noet:ft=help:norl: