From aed8ce9da277f5ecffe968b324f242c41c3b752a Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 10:50:31 +0200 Subject: Adding upstream version 2:9.0.1378. Signed-off-by: Daniel Baumann --- runtime/doc/channel.txt | 1562 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1562 insertions(+) create mode 100644 runtime/doc/channel.txt (limited to 'runtime/doc/channel.txt') diff --git a/runtime/doc/channel.txt b/runtime/doc/channel.txt new file mode 100644 index 0000000..535c175 --- /dev/null +++ b/runtime/doc/channel.txt @@ -0,0 +1,1562 @@ +*channel.txt* For Vim version 9.0. Last change: 2022 Dec 01 + + + VIM REFERENCE MANUAL by Bram Moolenaar + + + Inter-process communication *channel* + +Vim uses channels to communicate with other processes. +A channel uses a socket or pipes. *socket-interface* +Jobs can be used to start processes and communicate with them. +The Netbeans interface also uses a channel. |netbeans| + +1. Overview |job-channel-overview| +2. Channel demo |channel-demo| +3. Opening a channel |channel-open| +4. Using a JSON or JS channel |channel-use| +5. Channel commands |channel-commands| +6. Using a RAW or NL channel |channel-raw| +7. More channel functions |channel-more| +8. Channel functions details |channel-functions-details| +9. Starting a job with a channel |job-start| +10. Starting a job without a channel |job-start-nochannel| +11. Job functions |job-functions-details| +12. Job options |job-options| +13. Controlling a job |job-control| +14. Using a prompt buffer |prompt-buffer| +15. Language Server Protocol |language-server-protocol| + + *E1277* +{only when compiled with the |+channel| feature for channel stuff} + You can check this with: `has('channel')` +{only when compiled with the |+job| feature for job stuff} + You can check this with: `has('job')` + +============================================================================== +1. Overview *job-channel-overview* + +There are four main types of jobs: +1. A daemon, serving several Vim instances. + Vim connects to it with a socket. +2. One job working with one Vim instance, asynchronously. + Uses a socket or pipes. +3. A job performing some work for a short time, asynchronously. + Uses a socket or pipes. +4. Running a filter, synchronously. + Uses pipes. + +For when using sockets See |job-start|, |job-start-nochannel| and +|channel-open|. For 2 and 3, one or more jobs using pipes, see |job-start|. +For 4 use the ":{range}!cmd" command, see |filter|. + +Over the socket and pipes these protocols are available: +RAW nothing known, Vim cannot tell where a message ends +NL every message ends in a NL (newline) character +JSON JSON encoding |json_encode()| +JS JavaScript style JSON-like encoding |js_encode()| +LSP Language Server Protocol encoding |language-server-protocol| + +Common combination are: +- Using a job connected through pipes in NL mode. E.g., to run a style + checker and receive errors and warnings. +- Using a daemon, connecting over a socket in JSON mode. E.g. to lookup + cross-references in a database. + +============================================================================== +2. Channel demo *channel-demo* *demoserver.py* + +This requires Python. The demo program can be found in +$VIMRUNTIME/tools/demoserver.py +Run it in one terminal. We will call this T1. + +Run Vim in another terminal. Connect to the demo server with: > + let channel = ch_open('localhost:8765') + +In T1 you should see: + === socket opened === ~ + +You can now send a message to the server: > + echo ch_evalexpr(channel, 'hello!') + +The message is received in T1 and a response is sent back to Vim. +You can see the raw messages in T1. What Vim sends is: + [1,"hello!"] ~ +And the response is: + [1,"got it"] ~ +The number will increase every time you send a message. + +The server can send a command to Vim. Type this on T1 (literally, including +the quotes): + ["ex","echo 'hi there'"] ~ +And you should see the message in Vim. You can move the cursor a word forward: + ["normal","w"] ~ + +To handle asynchronous communication a callback needs to be used: > + func MyHandler(channel, msg) + echo "from the handler: " .. a:msg + endfunc + call ch_sendexpr(channel, 'hello!', {'callback': "MyHandler"}) +Vim will not wait for a response. Now the server can send the response later +and MyHandler will be invoked. + +Instead of giving a callback with every send call, it can also be specified +when opening the channel: > + call ch_close(channel) + let channel = ch_open('localhost:8765', {'callback': "MyHandler"}) + call ch_sendexpr(channel, 'hello channel!') + +When trying out channels it's useful to see what is going on. You can tell +Vim to write lines in log file: > + call ch_logfile('channellog', 'w') +See |ch_logfile()|. + +============================================================================== +3. Opening a channel *channel-open* + +To open a channel: > + let channel = ch_open({address} [, {options}]) + if ch_status(channel) == "open" + " use the channel + +Use |ch_status()| to see if the channel could be opened. + + *channel-address* +{address} can be a domain name or an IP address, followed by a port number, or +a Unix-domain socket path prefixed by "unix:". E.g. > + www.example.com:80 " domain + port + 127.0.0.1:1234 " IPv4 + port + [2001:db8::1]:8765 " IPv6 + port + unix:/tmp/my-socket " Unix-domain socket path + +{options} is a dictionary with optional entries: *channel-open-options* + +"mode" can be: *channel-mode* + "json" - Use JSON, see below; most convenient way. Default. + "js" - Use JS (JavaScript) encoding, more efficient than JSON. + "nl" - Use messages that end in a NL character + "raw" - Use raw messages + "lsp" - Use language server protocol encoding + *channel-callback* *E921* +"callback" A function that is called when a message is received that is + not handled otherwise (e.g. a JSON message with ID zero). It + gets two arguments: the channel and the received message. + Example: > + func Handle(channel, msg) + echo 'Received: ' .. a:msg + endfunc + let channel = ch_open("localhost:8765", {"callback": "Handle"}) +< + When "mode" is "json" or "js" or "lsp" the "msg" argument is + the body of the received message, converted to Vim types. + When "mode" is "nl" the "msg" argument is one message, + excluding the NL. + When "mode" is "raw" the "msg" argument is the whole message + as a string. + + For all callbacks: Use |function()| to bind it to arguments + and/or a Dictionary. Or use the form "dict.function" to bind + the Dictionary. + + Callbacks are only called at a "safe" moment, usually when Vim + is waiting for the user to type a character. Vim does not use + multi-threading. + + *close_cb* +"close_cb" A function that is called when the channel gets closed, other + than by calling ch_close(). It should be defined like this: > + func MyCloseHandler(channel) +< Vim will invoke callbacks that handle data before invoking + close_cb, thus when this function is called no more data will + be passed to the callbacks. However, if a callback causes Vim + to check for messages, the close_cb may be invoked while still + in the callback. The plugin must handle this somehow, it can + be useful to know that no more data is coming. + If it is not known if there is a message to be read, use a + try/catch block: > + try + let msg = ch_readraw(a:channel) + catch + let msg = 'no message' + endtry + try + let err = ch_readraw(a:channel, #{part: 'err'}) + catch + let err = 'no error' + endtry +< *channel-drop* +"drop" Specifies when to drop messages: + "auto" When there is no callback to handle a message. + The "close_cb" is also considered for this. + "never" All messages will be kept. + + *channel-noblock* +"noblock" Same effect as |job-noblock|. Only matters for writing. + + *waittime* +"waittime" The time to wait for the connection to be made in + milliseconds. A negative number waits forever. + + The default is zero, don't wait, which is useful if a local + server is supposed to be running already. On Unix Vim + actually uses a 1 msec timeout, that is required on many + systems. Use a larger value for a remote server, e.g. 10 + msec at least. + *channel-timeout* +"timeout" The time to wait for a request when blocking, E.g. when using + ch_evalexpr(). In milliseconds. The default is 2000 (2 + seconds). + +When "mode" is "json" or "js" the "callback" is optional. When omitted it is +only possible to receive a message after sending one. + +To change the channel options after opening it use |ch_setoptions()|. The +arguments are similar to what is passed to |ch_open()|, but "waittime" cannot +be given, since that only applies to opening the channel. + +For example, the handler can be added or changed: > + call ch_setoptions(channel, {'callback': callback}) +When "callback" is empty (zero or an empty string) the handler is removed. + +After a callback has been invoked Vim will update the screen and put the +cursor back where it belongs. Thus the callback should not need to do +`:redraw`. + +The timeout can be changed: > + call ch_setoptions(channel, {'timeout': msec}) +< + *channel-close* *E906* +Once done with the channel, disconnect it like this: > + call ch_close(channel) +When a socket is used this will close the socket for both directions. When +pipes are used (stdin/stdout/stderr) they are all closed. This might not be +what you want! Stopping the job with job_stop() might be better. +All readahead is discarded, callbacks will no longer be invoked. + +Note that a channel is closed in three stages: + - The I/O ends, log message: "Closing channel". There can still be queued + messages to read or callbacks to invoke. + - The readahead is cleared, log message: "Clearing channel". Some variables + may still reference the channel. + - The channel is freed, log message: "Freeing channel". + +When the channel can't be opened you will get an error message. There is a +difference between MS-Windows and Unix: On Unix when the port doesn't exist +ch_open() fails quickly. On MS-Windows "waittime" applies. +*E898* *E901* *E902* + +If there is an error reading or writing a channel it will be closed. +*E630* *E631* + +============================================================================== +4. Using a JSON or JS channel *channel-use* + +If mode is JSON then a message can be sent synchronously like this: > + let response = ch_evalexpr(channel, {expr}) +This awaits a response from the other side. + +When mode is JS this works the same, except that the messages use +JavaScript encoding. See |js_encode()| for the difference. + +To send a message, without handling a response or letting the channel callback +handle the response: > + call ch_sendexpr(channel, {expr}) + +To send a message and letting the response handled by a specific function, +asynchronously: > + call ch_sendexpr(channel, {expr}, {'callback': Handler}) + +Vim will match the response with the request using the message ID. Once the +response is received the callback will be invoked. Further responses with the +same ID will be ignored. If your server sends back multiple responses you +need to send them with ID zero, they will be passed to the channel callback. + +The {expr} is converted to JSON and wrapped in an array. An example of the +message that the receiver will get when {expr} is the string "hello": + [12,"hello"] ~ + +The format of the JSON sent is: + [{number},{expr}] + +In which {number} is different every time. It must be used in the response +(if any): + + [{number},{response}] + +This way Vim knows which sent message matches with which received message and +can call the right handler. Also when the messages arrive out of order. + +A newline character is terminating the JSON text. This can be used to +separate the read text. For example, in Python: + splitidx = read_text.find('\n') + message = read_text[:splitidx] + rest = read_text[splitidx + 1:] + +The sender must always send valid JSON to Vim. Vim can check for the end of +the message by parsing the JSON. It will only accept the message if the end +was received. A newline after the message is optional. + +When the process wants to send a message to Vim without first receiving a +message, it must use the number zero: + [0,{response}] + +Then channel handler will then get {response} converted to Vim types. If the +channel does not have a handler the message is dropped. + +It is also possible to use ch_sendraw() and ch_evalraw() on a JSON or JS +channel. The caller is then completely responsible for correct encoding and +decoding. + +============================================================================== +5. Channel commands *channel-commands* + +With a JSON channel the process can send commands to Vim that will be +handled by Vim internally, it does not require a handler for the channel. + +Possible commands are: *E903* *E904* *E905* + ["redraw", {forced}] + ["ex", {Ex command}] + ["normal", {Normal mode command}] + ["expr", {expression}, {number}] + ["expr", {expression}] + ["call", {func name}, {argument list}, {number}] + ["call", {func name}, {argument list}] + +With all of these: Be careful what these commands do! You can easily +interfere with what the user is doing. To avoid trouble use |mode()| to check +that the editor is in the expected state. E.g., to send keys that must be +inserted as text, not executed as a command: + ["ex","if mode() == 'i' | call feedkeys('ClassName') | endif"] ~ + +Errors in these commands are normally not reported to avoid them messing up +the display. If you do want to see them, set the 'verbose' option to 3 or +higher. + + +Command "redraw" ~ + +The other commands do not explicitly update the screen, so that you can send a +sequence of commands without the cursor moving around. A redraw can happen as +a side effect of some commands. You must end with the "redraw" command to +show any changed text and show the cursor where it belongs. + +The argument is normally an empty string: + ["redraw", ""] ~ +To first clear the screen pass "force": + ["redraw", "force"] ~ + + +Command "ex" ~ + +The "ex" command is executed as any Ex command. There is no response for +completion or error. You could use functions in an |autoload| script: + ["ex","call myscript#MyFunc(arg)"] + +You can also use "call |feedkeys()|" to insert any key sequence. + +When there is an error a message is written to the channel log, if it exists, +and v:errmsg is set to the error. + + +Command "normal" ~ + +The "normal" command is executed like with ":normal!", commands are not +mapped. Example to open the folds under the cursor: + ["normal" "zO"] + + +Command "expr" with response ~ + +The "expr" command can be used to get the result of an expression. For +example, to get the number of lines in the current buffer: + ["expr","line('$')", -2] ~ + +It will send back the result of the expression: + [-2, "last line"] ~ +The format is: + [{number}, {result}] + +Here {number} is the same as what was in the request. Use a negative number +to avoid confusion with message that Vim sends. Use a different number on +every request to be able to match the request with the response. + +{result} is the result of the evaluation and is JSON encoded. If the +evaluation fails or the result can't be encoded in JSON it is the string +"ERROR". + + +Command "expr" without a response ~ + +This command is similar to "expr" above, but does not send back any response. +Example: + ["expr","setline('$', ['one', 'two', 'three'])"] ~ +There is no third argument in the request. + + +Command "call" ~ + +This is similar to "expr", but instead of passing the whole expression as a +string this passes the name of a function and a list of arguments. This +avoids the conversion of the arguments to a string and escaping and +concatenating them. Example: + ["call", "line", ["$"], -2] ~ + +Leave out the fourth argument if no response is to be sent: + ["call", "setline", ["$", ["one", "two", "three"]]] ~ + +============================================================================== +6. Using a RAW or NL channel *channel-raw* + +If mode is RAW or NL then a message can be sent like this: > + let response = ch_evalraw(channel, {string}) + +The {string} is sent as-is. The response will be what can be read from the +channel right away. Since Vim doesn't know how to recognize the end of the +message you need to take care of it yourself. The timeout applies for reading +the first byte, after that it will not wait for anything more. + +If mode is "nl" you can send a message in a similar way. You are expected +to put in the NL after each message. Thus you can also send several messages +ending in a NL at once. The response will be the text up to and including the +first NL. This can also be just the NL for an empty response. +If no NL was read before the channel timeout an empty string is returned. + +To send a message, without expecting a response: > + call ch_sendraw(channel, {string}) +The process can send back a response, the channel handler will be called with +it. + + *channel-onetime-callback* +To send a message and letting the response handled by a specific function, +asynchronously: > + call ch_sendraw(channel, {string}, {'callback': 'MyHandler'}) + +This {string} can also be JSON, use |json_encode()| to create it and +|json_decode()| to handle a received JSON message. + +It is not possible to use |ch_evalexpr()| or |ch_sendexpr()| on a raw channel. + +A String in Vim cannot contain NUL bytes. To send or receive NUL bytes read +or write from a buffer. See |in_io-buffer| and |out_io-buffer|. + +============================================================================== +7. More channel functions *channel-more* + +To obtain the status of a channel: ch_status(channel). The possible results +are: + "fail" Failed to open the channel. + "open" The channel can be used. + "buffered" The channel was closed but there is data to read. + "closed" The channel was closed. + +To obtain the job associated with a channel: ch_getjob(channel) + +To read one message from a channel: > + let output = ch_read(channel) +This uses the channel timeout. To read without a timeout, just get any +message that is available: > + let output = ch_read(channel, {'timeout': 0}) +When no message was available then the result is v:none for a JSON or JS mode +channels, an empty string for a RAW or NL channel. You can use |ch_canread()| +to check if there is something to read. + +Note that when there is no callback, messages are dropped. To avoid that add +a close callback to the channel. + +To read all normal output from a RAW channel that is available: > + let output = ch_readraw(channel) +To read all error output from a RAW channel that is available: > + let output = ch_readraw(channel, {"part": "err"}) +Note that if the channel is in NL mode, ch_readraw() will only return one line +for each call. + +ch_read() and ch_readraw() use the channel timeout. When there is nothing to +read within that time an empty string is returned. To specify a different +timeout in msec use the "timeout" option: + {"timeout": 123} ~ +To read from the error output use the "part" option: + {"part": "err"} ~ +To read a message with a specific ID, on a JS or JSON channel: + {"id": 99} ~ +When no ID is specified or the ID is -1, the first message is returned. This +overrules any callback waiting for this message. + +For a RAW channel this returns whatever is available, since Vim does not know +where a message ends. +For a NL channel this returns one message. +For a JS or JSON channel this returns one decoded message. +This includes any sequence number. + +============================================================================== +8. Channel functions details *channel-functions-details* + +ch_canread({handle}) *ch_canread()* + Return non-zero when there is something to read from {handle}. + {handle} can be a Channel or a Job that has a Channel. + + This is useful to read from a channel at a convenient time, + e.g. from a timer. + + Note that messages are dropped when the channel does not have + a callback. Add a close callback to avoid that. + + Can also be used as a |method|: > + GetChannel()->ch_canread() + +ch_close({handle}) *ch_close()* + Close {handle}. See |channel-close|. + {handle} can be a Channel or a Job that has a Channel. + A close callback is not invoked. + + Can also be used as a |method|: > + GetChannel()->ch_close() + +ch_close_in({handle}) *ch_close_in()* + Close the "in" part of {handle}. See |channel-close-in|. + {handle} can be a Channel or a Job that has a Channel. + A close callback is not invoked. + + Can also be used as a |method|: > + GetChannel()->ch_close_in() + + +ch_evalexpr({handle}, {expr} [, {options}]) *ch_evalexpr()* + Send {expr} over {handle}. The {expr} is encoded + according to the type of channel. The function cannot be used + with a raw channel. See |channel-use|. + {handle} can be a Channel or a Job that has a Channel. + When using the "lsp" channel mode, {expr} must be a |Dict|. + *E917* + {options} must be a Dictionary. It must not have a "callback" + entry. It can have a "timeout" entry to specify the timeout + for this specific request. + + ch_evalexpr() waits for a response and returns the decoded + expression. When there is an error or timeout it returns an + empty |String| or, when using the "lsp" channel mode, returns an + empty |Dict|. + + Note that while waiting for the response, Vim handles other + messages. You need to make sure this doesn't cause trouble. + + Can also be used as a |method|: > + GetChannel()->ch_evalexpr(expr) + + +ch_evalraw({handle}, {string} [, {options}]) *ch_evalraw()* + Send {string} over {handle}. + {handle} can be a Channel or a Job that has a Channel. + + Works like |ch_evalexpr()|, but does not encode the request or + decode the response. The caller is responsible for the + correct contents. Also does not add a newline for a channel + in NL mode, the caller must do that. The NL in the response + is removed. + Note that Vim does not know when the text received on a raw + channel is complete, it may only return the first part and you + need to use |ch_readraw()| to fetch the rest. + See |channel-use|. + + Can also be used as a |method|: > + GetChannel()->ch_evalraw(rawstring) + +ch_getbufnr({handle}, {what}) *ch_getbufnr()* + Get the buffer number that {handle} is using for String {what}. + {handle} can be a Channel or a Job that has a Channel. + {what} can be "err" for stderr, "out" for stdout or empty for + socket output. + Returns -1 when there is no buffer. + + Can also be used as a |method|: > + GetChannel()->ch_getbufnr(what) + +ch_getjob({channel}) *ch_getjob()* + Get the Job associated with {channel}. + If there is no job calling |job_status()| on the returned Job + will result in "fail". + + Can also be used as a |method|: > + GetChannel()->ch_getjob() + + +ch_info({handle}) *ch_info()* + Returns a Dictionary with information about {handle}. The + items are: + "id" number of the channel + "status" "open", "buffered" or "closed", like + ch_status() + When opened with ch_open(): + "hostname" the hostname of the address + "port" the port of the address + "path" the path of the Unix-domain socket + "sock_status" "open" or "closed" + "sock_mode" "NL", "RAW", "JSON" or "JS" + "sock_io" "socket" + "sock_timeout" timeout in msec + + Note that "path" is only present for Unix-domain sockets, for + regular ones "hostname" and "port" are present instead. + + When opened with job_start(): + "out_status" "open", "buffered" or "closed" + "out_mode" "NL", "RAW", "JSON" or "JS" + "out_io" "null", "pipe", "file" or "buffer" + "out_timeout" timeout in msec + "err_status" "open", "buffered" or "closed" + "err_mode" "NL", "RAW", "JSON" or "JS" + "err_io" "out", "null", "pipe", "file" or "buffer" + "err_timeout" timeout in msec + "in_status" "open" or "closed" + "in_mode" "NL", "RAW", "JSON", "JS" or "LSP" + "in_io" "null", "pipe", "file" or "buffer" + "in_timeout" timeout in msec + + Can also be used as a |method|: > + GetChannel()->ch_info() + + +ch_log({msg} [, {handle}]) *ch_log()* + Write String {msg} in the channel log file, if it was opened + with |ch_logfile()|. + The text "ch_log():" is prepended to the message to make clear + it came from this function call and make it easier to find in + the log file. + When {handle} is passed the channel number is used for the + message. + {handle} can be a Channel or a Job that has a Channel. The + Channel must be open for the channel number to be used. + + Can also be used as a |method|: > + 'did something'->ch_log() + + +ch_logfile({fname} [, {mode}]) *ch_logfile()* + Start logging channel activity to {fname}. + When {fname} is an empty string: stop logging. + + When {mode} is omitted or contains "a" or is "o" then append + to the file. + When {mode} contains "w" and not "a" start with an empty file. + When {mode} contains "o" then log all terminal output. + Otherwise only some interesting terminal output is logged. + + Use |ch_log()| to write log messages. The file is flushed + after every message, on Unix you can use "tail -f" to see what + is going on in real time. + + To enable the log very early, to see what is received from a + terminal during startup, use |--log| (this uses mode "ao"): > + vim --log logfile +< + This function is not available in the |sandbox|. + NOTE: the channel communication is stored in the file, be + aware that this may contain confidential and privacy sensitive + information, e.g. a password you type in a terminal window. + + Can also be used as a |method|: > + 'logfile'->ch_logfile('w') + + +ch_open({address} [, {options}]) *ch_open()* + Open a channel to {address}. See |channel|. + Returns a Channel. Use |ch_status()| to check for failure. + + {address} is a String, see |channel-address| for the possible + accepted forms. + + If {options} is given it must be a |Dictionary|. + See |channel-open-options|. + + Can also be used as a |method|: > + GetAddress()->ch_open() + + +ch_read({handle} [, {options}]) *ch_read()* + Read from {handle} and return the received message. + {handle} can be a Channel or a Job that has a Channel. + For a NL channel this waits for a NL to arrive, except when + there is nothing more to read (channel was closed). + See |channel-more|. + + Can also be used as a |method|: > + GetChannel()->ch_read() + + +ch_readblob({handle} [, {options}]) *ch_readblob()* + Like ch_read() but reads binary data and returns a |Blob|. + See |channel-more|. + + Can also be used as a |method|: > + GetChannel()->ch_readblob() + + +ch_readraw({handle} [, {options}]) *ch_readraw()* + Like ch_read() but for a JS and JSON channel does not decode + the message. For a NL channel it does not block waiting for + the NL to arrive, but otherwise works like ch_read(). + See |channel-more|. + + Can also be used as a |method|: > + GetChannel()->ch_readraw() + + +ch_sendexpr({handle}, {expr} [, {options}]) *ch_sendexpr()* + Send {expr} over {handle}. The {expr} is encoded + according to the type of channel. The function cannot be used + with a raw channel. + See |channel-use|. *E912* + {handle} can be a Channel or a Job that has a Channel. + When using the "lsp" channel mode, {expr} must be a |Dict|. + + If the channel mode is "lsp", then returns a Dict. Otherwise + returns an empty String. If the "callback" item is present in + {options}, then the returned Dict contains the ID of the + request message. The ID can be used to send a cancellation + request to the LSP server (if needed). Returns an empty Dict + on error. + + If a response message is not expected for {expr}, then don't + specify the "callback" item in {options}. + + Can also be used as a |method|: > + GetChannel()->ch_sendexpr(expr) + + +ch_sendraw({handle}, {expr} [, {options}]) *ch_sendraw()* + Send |String| or |Blob| {expr} over {handle}. + Works like |ch_sendexpr()|, but does not encode the request or + decode the response. The caller is responsible for the + correct contents. Also does not add a newline for a channel + in NL mode, the caller must do that. The NL in the response + is removed. + See |channel-use|. + + Can also be used as a |method|: > + GetChannel()->ch_sendraw(rawexpr) + + +ch_setoptions({handle}, {options}) *ch_setoptions()* + Set options on {handle}: + "callback" the channel callback + "timeout" default read timeout in msec + "mode" mode for the whole channel + See |ch_open()| for more explanation. + {handle} can be a Channel or a Job that has a Channel. + + Note that changing the mode may cause queued messages to be + lost. + + These options cannot be changed: + "waittime" only applies to |ch_open()| + + Can also be used as a |method|: > + GetChannel()->ch_setoptions(options) + + +ch_status({handle} [, {options}]) *ch_status()* + Return the status of {handle}: + "fail" failed to open the channel + "open" channel can be used + "buffered" channel can be read, not written to + "closed" channel can not be used + {handle} can be a Channel or a Job that has a Channel. + "buffered" is used when the channel was closed but there is + still data that can be obtained with |ch_read()|. + + If {options} is given it can contain a "part" entry to specify + the part of the channel to return the status for: "out" or + "err". For example, to get the error status: > + ch_status(job, {"part": "err"}) +< + Can also be used as a |method|: > + GetChannel()->ch_status() + +============================================================================== +9. Starting a job with a channel *job-start* *job* + +To start a job and open a channel for stdin/stdout/stderr: > + let job = job_start(command, {options}) + +You can get the channel with: > + let channel = job_getchannel(job) + +The channel will use NL mode. If you want another mode it's best to specify +this in {options}. When changing the mode later some text may have already +been received and not parsed correctly. + +If the command produces a line of output that you want to deal with, specify +a handler for stdout: > + let job = job_start(command, {"out_cb": "MyHandler"}) +The function will be called with the channel and a message. You would define +it like this: > + func MyHandler(channel, msg) + +Without the handler you need to read the output with |ch_read()| or +|ch_readraw()|. You can do this in the close callback, see |read-in-close-cb|. + +Note that if the job exits before you read the output, the output may be lost. +This depends on the system (on Unix this happens because closing the write end +of a pipe causes the read end to get EOF). To avoid this make the job sleep +for a short while before it exits. + +The handler defined for "out_cb" will not receive stderr. If you want to +handle that separately, add an "err_cb" handler: > + let job = job_start(command, {"out_cb": "MyHandler", + \ "err_cb": "ErrHandler"}) + +If you want to handle both stderr and stdout with one handler use the +"callback" option: > + let job = job_start(command, {"callback": "MyHandler"}) + +Depending on the system, starting a job can put Vim in the background, the +started job gets the focus. To avoid that, use the `foreground()` function. +This might not always work when called early, put in the callback handler or +use a timer to call it after the job has started. + +You can send a message to the command with ch_evalraw(). If the channel is in +JSON or JS mode you can use ch_evalexpr(). + +There are several options you can use, see |job-options|. +For example, to start a job and write its output in buffer "dummy": > + let logjob = job_start("tail -f /tmp/log", + \ {'out_io': 'buffer', 'out_name': 'dummy'}) + sbuf dummy + + +Job input from a buffer ~ + *in_io-buffer* +To run a job that reads from a buffer: > + let job = job_start({command}, + \ {'in_io': 'buffer', 'in_name': 'mybuffer'}) +< + *E915* *E918* +The buffer is found by name, similar to |bufnr()|. The buffer must exist and +be loaded when job_start() is called. + +By default this reads the whole buffer. This can be changed with the "in_top" +and "in_bot" options. + +A special mode is when "in_top" is set to zero and "in_bot" is not set: Every +time a line is added to the buffer, the last-but-one line will be sent to the +job stdin. This allows for editing the last line and sending it when pressing +Enter. + *channel-close-in* +When not using the special mode the pipe or socket will be closed after the +last line has been written. This signals the reading end that the input +finished. You can also use |ch_close_in()| to close it sooner. + +NUL bytes in the text will be passed to the job (internally Vim stores these +as NL bytes). + + +Reading job output in the close callback ~ + *read-in-close-cb* +If the job can take some time and you don't need intermediate results, you can +add a close callback and read the output there: > + + func! CloseHandler(channel) + while ch_status(a:channel, {'part': 'out'}) == 'buffered' + echomsg ch_read(a:channel) + endwhile + endfunc + let job = job_start(command, {'close_cb': 'CloseHandler'}) + +You will want to do something more useful than "echomsg". + +============================================================================== +10. Starting a job without a channel *job-start-nochannel* + +To start another process without creating a channel: > + let job = job_start(command, + \ {"in_io": "null", "out_io": "null", "err_io": "null"}) + +This starts {command} in the background, Vim does not wait for it to finish. + +When Vim sees that neither stdin, stdout or stderr are connected, no channel +will be created. Often you will want to include redirection in the command to +avoid it getting stuck. + +There are several options you can use, see |job-options|. + + *job-start-if-needed* +To start a job only when connecting to an address does not work, do something +like this: > + let channel = ch_open(address, {"waittime": 0}) + if ch_status(channel) == "fail" + let job = job_start(command) + let channel = ch_open(address, {"waittime": 1000}) + endif + +Note that the waittime for ch_open() gives the job one second to make the port +available. + +============================================================================== +11. Job functions *job-functions-details* + +job_getchannel({job}) *job_getchannel()* + Get the channel handle that {job} is using. + To check if the job has no channel: > + if string(job_getchannel(job)) == 'channel fail' +< + Can also be used as a |method|: > + GetJob()->job_getchannel() + +job_info([{job}]) *job_info()* + Returns a Dictionary with information about {job}: + "status" what |job_status()| returns + "channel" what |job_getchannel()| returns + "cmd" List of command arguments used to start the job + "process" process ID + "tty_in" terminal input name, empty when none + "tty_out" terminal output name, empty when none + "exitval" only valid when "status" is "dead" + "exit_cb" function to be called on exit + "stoponexit" |job-stoponexit| + + Only in Unix: + "termsig" the signal which terminated the process + (See |job_stop()| for the values) + only valid when "status" is "dead" + + Only in MS-Windows: + "tty_type" Type of virtual console in use. + Values are "winpty" or "conpty". + See 'termwintype'. + + Without any arguments, returns a List with all Job objects. + + Can also be used as a |method|: > + GetJob()->job_info() + + +job_setoptions({job}, {options}) *job_setoptions()* + Change options for {job}. Supported are: + "stoponexit" |job-stoponexit| + "exit_cb" |job-exit_cb| + + Can also be used as a |method|: > + GetJob()->job_setoptions(options) + + +job_start({command} [, {options}]) *job_start()* + Start a job and return a Job object. Unlike |system()| and + |:!cmd| this does not wait for the job to finish. + To start a job in a terminal window see |term_start()|. + + If the job fails to start then |job_status()| on the returned + Job object results in "fail" and none of the callbacks will be + invoked. + + {command} can be a String. This works best on MS-Windows. On + Unix it is split up in white-separated parts to be passed to + execvp(). Arguments in double quotes can contain white space. + + {command} can be a List, where the first item is the executable + and further items are the arguments. All items are converted + to String. This works best on Unix. + + On MS-Windows, job_start() makes a GUI application hidden. If + want to show it, Use |:!start| instead. + + The command is executed directly, not through a shell, the + 'shell' option is not used. To use the shell: > + let job = job_start(["/bin/sh", "-c", "echo hello"]) +< Or: > + let job = job_start('/bin/sh -c "echo hello"') +< Note that this will start two processes, the shell and the + command it executes. If you don't want this use the "exec" + shell command. + + On Unix $PATH is used to search for the executable only when + the command does not contain a slash. + + The job will use the same terminal as Vim. If it reads from + stdin the job and Vim will be fighting over input, that + doesn't work. Redirect stdin and stdout to avoid problems: > + let job = job_start(['sh', '-c', "myserver /dev/null"]) +< + The returned Job object can be used to get the status with + |job_status()| and stop the job with |job_stop()|. + + Note that the job object will be deleted if there are no + references to it. This closes the stdin and stderr, which may + cause the job to fail with an error. To avoid this keep a + reference to the job. Thus instead of: > + call job_start('my-command') +< use: > + let myjob = job_start('my-command') +< and unlet "myjob" once the job is not needed or is past the + point where it would fail (e.g. when it prints a message on + startup). Keep in mind that variables local to a function + will cease to exist if the function returns. Use a + script-local variable if needed: > + let s:myjob = job_start('my-command') +< + {options} must be a Dictionary. It can contain many optional + items, see |job-options|. + + Can also be used as a |method|: > + BuildCommand()->job_start() + + +job_status({job}) *job_status()* *E916* + Returns a String with the status of {job}: + "run" job is running + "fail" job failed to start + "dead" job died or was stopped after running + + On Unix a non-existing command results in "dead" instead of + "fail", because a fork happens before the failure can be + detected. + + If in Vim9 script a variable is declared with type "job" but + never assigned to, passing that variable to job_status() + returns "fail". + + If an exit callback was set with the "exit_cb" option and the + job is now detected to be "dead" the callback will be invoked. + + For more information see |job_info()|. + + Can also be used as a |method|: > + GetJob()->job_status() + + +job_stop({job} [, {how}]) *job_stop()* + Stop the {job}. This can also be used to signal the job. + + When {how} is omitted or is "term" the job will be terminated. + For Unix SIGTERM is sent. On MS-Windows the job will be + terminated forcedly (there is no "gentle" way). + This goes to the process group, thus children may also be + affected. + + Effect for Unix: + "term" SIGTERM (default) + "hup" SIGHUP + "quit" SIGQUIT + "int" SIGINT + "kill" SIGKILL (strongest way to stop) + number signal with that number + + Effect for MS-Windows: + "term" terminate process forcedly (default) + "hup" CTRL_BREAK + "quit" CTRL_BREAK + "int" CTRL_C + "kill" terminate process forcedly + Others CTRL_BREAK + + On Unix the signal is sent to the process group. This means + that when the job is "sh -c command" it affects both the shell + and the command. + + The result is a Number: 1 if the operation could be executed, + 0 if "how" is not supported on the system. + Note that even when the operation was executed, whether the + job was actually stopped needs to be checked with + |job_status()|. + + If the status of the job is "dead", the signal will not be + sent. This is to avoid to stop the wrong job (esp. on Unix, + where process numbers are recycled). + + When using "kill" Vim will assume the job will die and close + the channel. + + Can also be used as a |method|: > + GetJob()->job_stop() + + +============================================================================== +12. Job options *job-options* + +The {options} argument in job_start() is a dictionary. All entries are +optional. Some options can be used after the job has started, using +job_setoptions(job, {options}). Many options can be used with the channel +related to the job, using ch_setoptions(channel, {options}). +See |job_setoptions()| and |ch_setoptions()|. + + *in_mode* *out_mode* *err_mode* +"in_mode" mode specifically for stdin, only when using pipes +"out_mode" mode specifically for stdout, only when using pipes +"err_mode" mode specifically for stderr, only when using pipes + See |channel-mode| for the values. + + Note: when setting "mode" the part specific mode is + overwritten. Therefore set "mode" first and the part + specific mode later. + + Note: when writing to a file or buffer and when + reading from a buffer NL mode is used by default. + + *job-noblock* +"noblock": 1 When writing use a non-blocking write call. This + avoids getting stuck if Vim should handle other + messages in between, e.g. when a job sends back data + to Vim. It implies that when `ch_sendraw()` returns + not all data may have been written yet. + This option was added in patch 8.1.0350, test with: > + if has("patch-8.1.350") + let options['noblock'] = 1 + endif +< + *job-callback* +"callback": handler Callback for something to read on any part of the + channel. + *job-out_cb* *out_cb* +"out_cb": handler Callback for when there is something to read on + stdout. Only for when the channel uses pipes. When + "out_cb" wasn't set the channel callback is used. + The two arguments are the channel and the message. + + *job-err_cb* *err_cb* +"err_cb": handler Callback for when there is something to read on + stderr. Only for when the channel uses pipes. When + "err_cb" wasn't set the channel callback is used. + The two arguments are the channel and the message. + *job-close_cb* +"close_cb": handler Callback for when the channel is closed. Same as + "close_cb" on |ch_open()|, see |close_cb|. + *job-drop* +"drop": when Specifies when to drop messages. Same as "drop" on + |ch_open()|, see |channel-drop|. For "auto" the + exit_cb is not considered. + *job-exit_cb* +"exit_cb": handler Callback for when the job ends. The arguments are the + job and the exit status. + Vim checks up to 10 times per second for jobs that + ended. The check can also be triggered by calling + |job_status()|, which may then invoke the exit_cb + handler. + Note that data can be buffered, callbacks may still be + called after the process ends. + *job-timeout* +"timeout": time The time to wait for a request when blocking, E.g. + when using ch_evalexpr(). In milliseconds. The + default is 2000 (2 seconds). + *out_timeout* *err_timeout* +"out_timeout": time Timeout for stdout. Only when using pipes. +"err_timeout": time Timeout for stderr. Only when using pipes. + Note: when setting "timeout" the part specific mode is + overwritten. Therefore set "timeout" first and the + part specific mode later. + + *job-stoponexit* +"stoponexit": {signal} Send {signal} to the job when Vim exits. See + |job_stop()| for possible values. +"stoponexit": "" Do not stop the job when Vim exits. + The default is "term". + + *job-term* +"term": "open" Start a terminal in a new window and connect the job + stdin/stdout/stderr to it. Similar to using + `:terminal`. + NOTE: Not implemented yet! + +"channel": {channel} Use an existing channel instead of creating a new one. + The parts of the channel that get used for the new job + will be disconnected from what they were used before. + If the channel was still used by another job this may + cause I/O errors. + Existing callbacks and other settings remain. + +"pty": 1 Use a pty (pseudo-tty) instead of a pipe when + possible. This is most useful in combination with a + terminal window, see |terminal|. + {only on Unix and Unix-like systems} + + *job-in_io* *in_top* *in_bot* *in_name* *in_buf* +"in_io": "null" disconnect stdin (read from /dev/null) +"in_io": "pipe" stdin is connected to the channel (default) +"in_io": "file" stdin reads from a file +"in_io": "buffer" stdin reads from a buffer +"in_top": number when using "buffer": first line to send (default: 1) +"in_bot": number when using "buffer": last line to send (default: last) +"in_name": "/path/file" the name of the file or buffer to read from +"in_buf": number the number of the buffer to read from + + *job-out_io* *out_name* *out_buf* +"out_io": "null" disconnect stdout (goes to /dev/null) +"out_io": "pipe" stdout is connected to the channel (default) +"out_io": "file" stdout writes to a file +"out_io": "buffer" stdout appends to a buffer (see below) +"out_name": "/path/file" the name of the file or buffer to write to +"out_buf": number the number of the buffer to write to +"out_modifiable": 0 when writing to a buffer, 'modifiable' will be off + (see below) +"out_msg": 0 when writing to a new buffer, the first line will be + set to "Reading from channel output..." + + *job-err_io* *err_name* *err_buf* +"err_io": "out" stderr messages to go to stdout +"err_io": "null" disconnect stderr (goes to /dev/null) +"err_io": "pipe" stderr is connected to the channel (default) +"err_io": "file" stderr writes to a file +"err_io": "buffer" stderr appends to a buffer (see below) +"err_name": "/path/file" the name of the file or buffer to write to +"err_buf": number the number of the buffer to write to +"err_modifiable": 0 when writing to a buffer, 'modifiable' will be off + (see below) +"err_msg": 0 when writing to a new buffer, the first line will be + set to "Reading from channel error..." + +"block_write": number only for testing: pretend every other write to stdin + will block + +"env": dict environment variables for the new process +"cwd": "/path/to/dir" current working directory for the new process; + if the directory does not exist an error is given + + +Writing to a buffer ~ + *out_io-buffer* +When the out_io or err_io mode is "buffer" and there is a callback, the text +is appended to the buffer before invoking the callback. + +When a buffer is used both for input and output, the output lines are put +above the last line, since the last line is what is written to the channel +input. Otherwise lines are appended below the last line. + +When using JS or JSON mode with "buffer", only messages with zero or negative +ID will be added to the buffer, after decoding + encoding. Messages with a +positive number will be handled by a callback, commands are handled as usual. + +The name of the buffer from "out_name" or "err_name" is compared the full name +of existing buffers, also after expanding the name for the current directory. +E.g., when a buffer was created with ":edit somename" and the buffer name is +"somename" it will use that buffer. + +If there is no matching buffer a new buffer is created. Use an empty name to +always create a new buffer. |ch_getbufnr()| can then be used to get the +buffer number. + +For a new buffer 'buftype' is set to "nofile" and 'bufhidden' to "hide". If +you prefer other settings, create the buffer first and pass the buffer number. + *out_modifiable* *err_modifiable* +The "out_modifiable" and "err_modifiable" options can be used to set the +'modifiable' option off, or write to a buffer that has 'modifiable' off. That +means that lines will be appended to the buffer, but the user can't easily +change the buffer. + *out_msg* *err_msg* +The "out_msg" option can be used to specify whether a new buffer will have the +first line set to "Reading from channel output...". The default is to add the +message. "err_msg" does the same for channel error. + +When an existing buffer is to be written where 'modifiable' is off and the +"out_modifiable" or "err_modifiable" options is not zero, an error is given +and the buffer will not be written to. + +When the buffer written to is displayed in a window and the cursor is in the +first column of the last line, the cursor will be moved to the newly added +line and the window is scrolled up to show the cursor if needed. + +Undo is synced for every added line. NUL bytes are accepted (internally Vim +stores these as NL bytes). + + +Writing to a file ~ + *E920* +The file is created with permissions 600 (read-write for the user, not +accessible for others). Use |setfperm()| to change this. + +If the file already exists it is truncated. + +============================================================================== +13. Controlling a job *job-control* + +To get the status of a job: > + echo job_status(job) + +To make a job stop running: > + job_stop(job) + +This is the normal way to end a job. On Unix it sends a SIGTERM to the job. +It is possible to use other ways to stop the job, or even send arbitrary +signals. E.g. to force a job to stop, "kill it": > + job_stop(job, "kill") + +For more options see |job_stop()|. + +============================================================================== +14. Using a prompt buffer *prompt-buffer* + +If you want to type input for the job in a Vim window you have a few options: +- Use a normal buffer and handle all possible commands yourself. + This will be complicated, since there are so many possible commands. +- Use a terminal window. This works well if what you type goes directly to + the job and the job output is directly displayed in the window. + See |terminal-window|. +- Use a window with a prompt buffer. This works well when entering a line for + the job in Vim while displaying (possibly filtered) output from the job. + +A prompt buffer is created by setting 'buftype' to "prompt". You would +normally only do that in a newly created buffer. + +The user can edit and enter one line of text at the very last line of the +buffer. When pressing Enter in the prompt line the callback set with +|prompt_setcallback()| is invoked. It would normally send the line to a job. +Another callback would receive the output from the job and display it in the +buffer, below the prompt (and above the next prompt). + +Only the text in the last line, after the prompt, is editable. The rest of the +buffer is not modifiable with Normal mode commands. It can be modified by +calling functions, such as |append()|. Using other commands may mess up the +buffer. + +After setting 'buftype' to "prompt" Vim does not automatically start Insert +mode, use `:startinsert` if you want to enter Insert mode, so that the user +can start typing a line. + +The text of the prompt can be set with the |prompt_setprompt()| function. If +no prompt is set with |prompt_setprompt()|, "% " is used. You can get the +effective prompt text for a buffer, with |prompt_getprompt()|. + +The user can go to Normal mode and navigate through the buffer. This can be +useful to see older output or copy text. + +The CTRL-W key can be used to start a window command, such as CTRL-W w to +switch to the next window. This also works in Insert mode (use Shift-CTRL-W +to delete a word). When leaving the window Insert mode will be stopped. When +coming back to the prompt window Insert mode will be restored. + +Any command that starts Insert mode, such as "a", "i", "A" and "I", will move +the cursor to the last line. "A" will move to the end of the line, "I" to the +start of the line. + +Here is an example for Unix. It starts a shell in the background and prompts +for the next shell command. Output from the shell is displayed above the +prompt. > + + " Create a channel log so we can see what happens. + call ch_logfile('logfile', 'w') + + " Function handling a line of text that has been typed. + func TextEntered(text) + " Send the text to a shell with Enter appended. + call ch_sendraw(g:shell_job, a:text .. "\n") + endfunc + + " Function handling output from the shell: Add it above the prompt. + func GotOutput(channel, msg) + call append(line("$") - 1, "- " .. a:msg) + endfunc + + " Function handling the shell exits: close the window. + func JobExit(job, status) + quit! + endfunc + + " Start a shell in the background. + let shell_job = job_start(["/bin/sh"], #{ + \ out_cb: function('GotOutput'), + \ err_cb: function('GotOutput'), + \ exit_cb: function('JobExit'), + \ }) + + new + set buftype=prompt + let buf = bufnr('') + call prompt_setcallback(buf, function("TextEntered")) + eval prompt_setprompt(buf, "shell command: ") + + " start accepting shell commands + startinsert +< +The same in |Vim9| script: > + + vim9script + + # Create a channel log so we can see what happens. + ch_logfile('logfile', 'w') + + var shell_job: job + + # Function handling a line of text that has been typed. + def TextEntered(text: string) + # Send the text to a shell with Enter appended. + ch_sendraw(shell_job, text .. "\n") + enddef + + # Function handling output from the shell: Add it above the prompt. + def GotOutput(channel: channel, msg: string) + append(line("$") - 1, "- " .. msg) + enddef + + # Function handling the shell exits: close the window. + def JobExit(job: job, status: number) + quit! + enddef + + # Start a shell in the background. + shell_job = job_start(["/bin/sh"], { + out_cb: GotOutput, + err_cb: GotOutput, + exit_cb: JobExit, + }) + + new + set buftype=prompt + var buf = bufnr('') + prompt_setcallback(buf, TextEntered) + prompt_setprompt(buf, "shell command: ") + + # start accepting shell commands + startinsert + +============================================================================== +15. Language Server Protocol *language-server-protocol* + +The language server protocol specification is available at: + + https://microsoft.github.io/language-server-protocol/specification + +Each LSP protocol message starts with a simple HTTP header followed by the +payload encoded in JSON-RPC format. This is described in: + + https://www.jsonrpc.org/specification + +To encode and send a LSP request/notification message in a Vim |Dict| into a +LSP JSON-RPC message and to receive and decode a LSP JSON-RPC +response/notification message into a Vim |Dict|, connect to the LSP server +with the |channel-mode| set to "lsp". + +For messages received on a channel with |channel-mode| set to "lsp", Vim will +process the HTTP header and decode the JSON-RPC payload into a Vim |Dict| type +and call the |channel-callback| function or the specified +|channel-onetime-callback| function. When sending messages on a channel using +the |ch_evalexpr()| or |ch_sendexpr()| functions, Vim will add the HTTP header +and encode the Vim expression into JSON. Refer to |json_encode()| and +|json_decode()| for more information about how Vim encodes and decodes the +builtin types into JSON. + +To open a channel using the 'lsp' mode, set the 'mode' item in the |ch_open()| +{options} argument to 'lsp'. Example: > + + let ch = ch_open(..., #{mode: 'lsp'}) + +To open a channel using the 'lsp' mode with a job, set the 'in_mode' and +'out_mode' items in the |job_start()| {options} argument to 'lsp'. Example: > + + let cmd = ['clangd', '--background-index', '--clang-tidy'] + let opts = {} + let opts.in_mode = 'lsp' + let opts.out_mode = 'lsp' + let opts.err_mode = 'nl' + let opts.out_cb = function('LspOutCallback') + let opts.err_cb = function('LspErrCallback') + let opts.exit_cb = function('LspExitCallback') + let job = job_start(cmd, opts) + +Note that if a job outputs LSP messages on stdout and non-LSP messages on +stderr, then the channel-callback function should handle both the message +formats appropriately or you should use a separate callback function for +"out_cb" and "err_cb" to handle them as shown above. + +To synchronously send a JSON-RPC request to the server, use the +|ch_evalexpr()| function. This function will wait and return the decoded +response message from the server. You can use either the |channel-timeout| or +the 'timeout' field in the {options} argument to control the response wait +time. If the request times out, then an empty |Dict| is returned. Example: > + + let req = {} + let req.method = 'textDocument/definition' + let req.params = {} + let req.params.textDocument = #{uri: 'a.c'} + let req.params.position = #{line: 10, character: 3} + let defs = ch_evalexpr(ch, req, #{timeout: 100}) + if defs->empty() + ... + endif + +Note that in the request message the 'id' field should not be specified. If it +is specified, then Vim will overwrite the value with an internally generated +identifier. Vim currently supports only a number type for the 'id' field. +The callback function will be invoked for both a successful and a failed RPC +request. + +To send a JSON-RPC request to the server and asynchronously process the +response, use the |ch_sendexpr()| function and supply a callback function. If +the "id" field is present in the request message, then Vim will overwrite it +with an internally generated number. This function returns a Dict with the +identifier used for the message. This can be used to send cancellation +request to the LSP server (if needed). Example: > + + let req = {} + let req.method = 'textDocument/hover' + let req.id = 200 + let req.params = {} + let req.params.textDocument = #{uri: 'a.c'} + let req.params.position = #{line: 10, character: 3} + let resp = ch_sendexpr(ch, req, #{callback: 'HoverFunc'}) + +To cancel an outstanding asynchronous LSP request sent to the server using the +|ch_sendexpr()| function, send a cancellation message to the server using the +|ch_sendexpr()| function with the ID returned by the |ch_sendexpr()| function +for the request. Example: > + + " send a completion request + let req = {} + let req.method = 'textDocument/completion' + let req.params = {} + let req.params.textDocument = #{uri: 'a.c'} + let req.params.position = #{line: 10, character: 3} + let reqstatus = ch_sendexpr(ch, req, #{callback: 'LspComplete'}) + " send a cancellation notification + let notif = {} + let notif.method = '$/cancelRequest' + let notif.id = reqstatus.id + call ch_sendexpr(ch, notif) + +To send a JSON-RPC notification message to the server, use the |ch_sendexpr()| +function. As the server will not send a response message to the notification, +don't specify the "callback" item. Example: > + + call ch_sendexpr(ch, #{method: 'initialized'}) + +To respond to a JSON-RPC request message from the server, use the +|ch_sendexpr()| function. In the response message, copy the 'id' field value +from the server request message. Example: > + + let resp = {} + let resp.id = req.id + let resp.result = 1 + call ch_sendexpr(ch, resp) + +The JSON-RPC notification messages from the server are delivered through the +|channel-callback| function. + +Depending on the use case, you can use the ch_evalexpr(), ch_sendexpr() and +ch_sendraw() functions on the same channel. + +A LSP request message has the following format (expressed as a Vim Dict). The +"params" field is optional: > + + { + "jsonrpc": "2.0", + "id": , + "method": , + "params": + } + +A LSP response message has the following format (expressed as a Vim Dict). The +"result" and "error" fields are optional: > + + { + "jsonrpc": "2.0", + "id": , + "result": + "error": + } + +A LSP notification message has the following format (expressed as a Vim Dict). +The "params" field is optional: > + + { + "jsonrpc": "2.0", + "method": , + "params": + } + +< + vim:tw=78:ts=8:noet:ft=help:norl: -- cgit v1.2.3