Adding upstream version 7.0.6-dfsg.upstream/7.0.6-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 217 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/xpcom/build/nsXPCOM.h b/src/libs/xpcom18a4/xpcom/build/nsXPCOM.h
new file mode 100644
index 00000000..4e60c74e
--- /dev/null
+++ b/src/libs/xpcom18a4/xpcom/build/nsXPCOM.h
@@ -0,0 +1,217 @@
+/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either of the GNU General Public License Version 2 or later (the "GPL"),
+ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef nsXPCOM_h__
+#define nsXPCOM_h__
+
+#include "nscore.h"
+#include "nsXPCOMCID.h"
+
+#ifdef VBOX_WITH_XPCOM_NAMESPACE_CLEANUP
+#define NS_InitXPCOM2 VBoxNsxpNS_InitXPCOM2
+#define NS_ShutdownXPCOM VBoxNsxpNS_ShutdownXPCOM
+#define NS_NewNativeLocalFile VBoxNsxpNS_NewNativeLocalFile
+#define NS_GetServiceManager VBoxNsxpNS_GetServiceManager
+#define NS_GetComponentManager VBoxNsxpNS_GetComponentManager
+#define NS_GetComponentRegistrar VBoxNsxpNS_GetComponentRegistrar
+#define NS_GetDebug VBoxNsxpNS_GetDebug
+#define NS_GetMemoryManager VBoxNsxpNS_GetMemoryManager
+#define NS_GetTraceRefcnt VBoxNsxpNS_GetTraceRefcnt
+#define NS_NewLocalFile VBoxNsxpNS_NewLocalFile
+#endif /* VBOX_WITH_XPCOM_NAMESPACE_CLEANUP */
+
+class nsAString;
+class nsACString;
+
+class nsIComponentManager;
+class nsIComponentRegistrar;
+class nsIServiceManager;
+class nsIFile;
+class nsILocalFile;
+class nsIDirectoryServiceProvider;
+class nsIMemory;
+class nsIDebug;
+class nsITraceRefcnt;
+
+/**
+ * Initialises XPCOM. You must call this method before proceeding 
+ * to use xpcom. The one exception is that you may call 
+ * NS_NewLocalFile to create a nsIFile.
+ * 
+ * @status FROZEN
+ *
+ * @note Use <CODE>NS_NewLocalFile</CODE> or <CODE>NS_NewNativeLocalFile</CODE> 
+ *       to create the file object you supply as the bin directory path in this
+ *       call. The function may be safely called before the rest of XPCOM or 
+ *       embedding has been initialised.
+ *
+ * @param result           The service manager.  You may pass null.
+ *
+ * @param binDirectory     The directory containing the component
+ *                         registry and runtime libraries;
+ *                         or use <CODE>nsnull</CODE> to use the working
+ *                         directory.
+ *
+ * @param appFileLocationProvider The object to be used by Gecko that specifies
+ *                         to Gecko where to find profiles, the component
+ *                         registry preferences and so on; or use
+ *                         <CODE>nsnull</CODE> for the default behaviour.
+ *
+ * @see NS_NewLocalFile
+ * @see nsILocalFile
+ * @see nsIDirectoryServiceProvider
+ *
+ * @return NS_OK for success;
+ *         NS_ERROR_NOT_INITIALIZED if static globals were not initialied, which
+ *         can happen if XPCOM is reloaded, but did not completly shutdown.  
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_InitXPCOM2(nsIServiceManager* *result, 
+              nsIFile* binDirectory,
+              nsIDirectoryServiceProvider* appFileLocationProvider);
+/**
+ * Shutdown XPCOM. You must call this method after you are finished
+ * using xpcom. 
+ *
+ * @status FROZEN
+ *
+ * @param servMgr           The service manager which was returned by NS_InitXPCOM2.  
+ *                          This will release servMgr.  You may pass null.
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_ShutdownXPCOM(nsIServiceManager* servMgr);
+
+
+/**
+ * Public Method to access to the service manager.
+ * 
+ * @status FROZEN
+ * @param result Interface pointer to the service manager 
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_GetServiceManager(nsIServiceManager* *result);
+
+/**
+ * Public Method to access to the component manager.
+ * 
+ * @status FROZEN
+ * @param result Interface pointer to the service 
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_GetComponentManager(nsIComponentManager* *result);
+
+/**
+ * Public Method to access to the component registration manager.
+ * 
+ * @status FROZEN
+ * @param result Interface pointer to the service 
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_GetComponentRegistrar(nsIComponentRegistrar* *result);
+
+/**
+ * Public Method to access to the memory manager.  See nsIMemory
+ * 
+ * @status FROZEN
+ * @param result Interface pointer to the memory manager 
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure during initialisation.
+ *
+ */
+extern "C" NS_COM nsresult
+NS_GetMemoryManager(nsIMemory* *result);
+
+/**
+ * Public Method to create an instance of a nsILocalFile.  This function
+ * may be called prior to NS_InitXPCOM2.  
+ * 
+ * @status FROZEN
+ * 
+ *   @param path       
+ *       A string which specifies a full file path to a 
+ *       location.  Relative paths will be treated as an
+ *       error (NS_ERROR_FILE_UNRECOGNIZED_PATH).       
+ *       |NS_NewNativeLocalFile|'s path must be in the 
+ *       filesystem charset.
+ *   @param followLinks
+ *       This attribute will determine if the nsLocalFile will auto
+ *       resolve symbolic links.  By default, this value will be false
+ *       on all non unix systems.  On unix, this attribute is effectively
+ *       a noop.  
+ * @param result Interface pointer to a new instance of an nsILocalFile 
+ *
+ * @return NS_OK for success;
+ *         other error codes indicate a failure.
+ */
+
+extern "C" NS_COM nsresult
+NS_NewLocalFile(const nsAString &path, 
+                PRBool followLinks, 
+                nsILocalFile* *result);
+
+extern "C" NS_COM nsresult
+NS_NewNativeLocalFile(const nsACString &path, 
+                      PRBool followLinks, 
+                      nsILocalFile* *result);
+
+
+extern "C" NS_COM nsresult
+NS_GetDebug(nsIDebug* *result);
+
+extern "C" NS_COM nsresult
+NS_GetTraceRefcnt(nsITraceRefcnt* *result);
+
+#endif