diff options
Diffstat (limited to '')
| -rw-r--r-- | src/libs/xpcom18a4/xpcom/threads/nsProcessCommon.cpp | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/xpcom/threads/nsProcessCommon.cpp b/src/libs/xpcom18a4/xpcom/threads/nsProcessCommon.cpp new file mode 100644 index 00000000..07087c2f --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/threads/nsProcessCommon.cpp @@ -0,0 +1,363 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is Mozilla Communicator client code, released + * March 31, 1998. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-1999 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Don Bragg <dbragg@netscape.com> + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/***************************************************************************** + * + * nsProcess is used to execute new processes and specify if you want to + * wait (blocking) or continue (non-blocking). + * + ***************************************************************************** + */ + +#include "nsCOMPtr.h" +#include "nsMemory.h" +#include "nsProcess.h" +#include "prtypes.h" +#include "prio.h" +#include "prenv.h" +#include "nsCRT.h" + +#include <stdlib.h> + +#if defined( XP_WIN ) +#include "prmem.h" +#include "nsString.h" +#include "nsLiteralString.h" +#include "nsReadableUtils.h" +#include <windows.h> +#endif + +//-------------------------------------------------------------------// +// nsIProcess implementation +//-------------------------------------------------------------------// +NS_IMPL_ISUPPORTS1(nsProcess, nsIProcess) + +//Constructor +nsProcess::nsProcess():mExitValue(-1), + mProcess(nsnull) +{ +} + +NS_IMETHODIMP +nsProcess::Init(nsIFile* executable) +{ + PRBool isFile; + + //First make sure the file exists + nsresult rv = executable->IsFile(&isFile); + if (NS_FAILED(rv)) return rv; + if (!isFile) + return NS_ERROR_FAILURE; + + //Store the nsIFile in mExecutable + mExecutable = executable; + //Get the path because it is needed by the NSPR process creation +#ifdef XP_WIN + rv = mExecutable->GetNativeTarget(mTargetPath); + if (NS_FAILED(rv) || mTargetPath.IsEmpty() ) +#endif + rv = mExecutable->GetNativePath(mTargetPath); + + return rv; +} + + +#if defined( XP_WIN ) +static int assembleCmdLine(char *const *argv, char **cmdLine) +{ + char *const *arg; + char *p, *q; + int cmdLineSize; + int numBackslashes; + int i; + int argNeedQuotes; + + /* + * Find out how large the command line buffer should be. + */ + cmdLineSize = 0; + for (arg = argv; *arg; arg++) { + /* + * \ and " need to be escaped by a \. In the worst case, + * every character is a \ or ", so the string of length + * may double. If we quote an argument, that needs two ". + * Finally, we need a space between arguments, and + * a null byte at the end of command line. + */ + cmdLineSize += 2 * strlen(*arg) /* \ and " need to be escaped */ + + 2 /* we quote every argument */ + + 1; /* space in between, or final null */ + } + p = *cmdLine = (char *) PR_MALLOC(cmdLineSize); + if (p == NULL) { + return -1; + } + + for (arg = argv; *arg; arg++) { + /* Add a space to separates the arguments */ + if (arg != argv) { + *p++ = ' '; + } + q = *arg; + numBackslashes = 0; + argNeedQuotes = 0; + + /* If the argument contains white space, it needs to be quoted. */ + if (strpbrk(*arg, " \f\n\r\t\v")) { + argNeedQuotes = 1; + } + + if (argNeedQuotes) { + *p++ = '"'; + } + while (*q) { + if (*q == '\\') { + numBackslashes++; + q++; + } else if (*q == '"') { + if (numBackslashes) { + /* + * Double the backslashes since they are followed + * by a quote + */ + for (i = 0; i < 2 * numBackslashes; i++) { + *p++ = '\\'; + } + numBackslashes = 0; + } + /* To escape the quote */ + *p++ = '\\'; + *p++ = *q++; + } else { + if (numBackslashes) { + /* + * Backslashes are not followed by a quote, so + * don't need to double the backslashes. + */ + for (i = 0; i < numBackslashes; i++) { + *p++ = '\\'; + } + numBackslashes = 0; + } + *p++ = *q++; + } + } + + /* Now we are at the end of this argument */ + if (numBackslashes) { + /* + * Double the backslashes if we have a quote string + * delimiter at the end. + */ + if (argNeedQuotes) { + numBackslashes *= 2; + } + for (i = 0; i < numBackslashes; i++) { + *p++ = '\\'; + } + } + if (argNeedQuotes) { + *p++ = '"'; + } + } + + *p = '\0'; + return 0; +} +#endif + +// XXXldb |args| has the wrong const-ness +NS_IMETHODIMP +nsProcess::Run(PRBool blocking, const char **args, PRUint32 count, PRUint32 *pid) +{ + nsresult rv = NS_OK; + + // make sure that when we allocate we have 1 greater than the + // count since we need to null terminate the list for the argv to + // pass into PR_CreateProcess + char **my_argv = NULL; +#ifdef VBOX + my_argv = (char **)nsMemory::Alloc(sizeof(char *) * (count + 2) ); +#else + my_argv = (char **)malloc(sizeof(char *) * (count + 2) ); +#endif + if (!my_argv) { + return NS_ERROR_OUT_OF_MEMORY; + } + + // copy the args + PRUint32 i; + for (i=0; i < count; i++) { + my_argv[i+1] = NS_CONST_CAST(char*, args[i]); + } + // we need to set argv[0] to the program name. + my_argv[0] = mTargetPath.BeginWriting(); + // null terminate the array + my_argv[count+1] = NULL; + + #if defined(XP_WIN) + STARTUPINFO startupInfo; + PROCESS_INFORMATION procInfo; + BOOL retVal; + char *cmdLine; + + if (assembleCmdLine(my_argv, &cmdLine) == -1) { + nsMemory::Free(my_argv); + return NS_ERROR_FILE_EXECUTION_FAILED; + } + + ZeroMemory(&startupInfo, sizeof(startupInfo)); + startupInfo.cb = sizeof(startupInfo); + + retVal = CreateProcess(NULL, + // NS_CONST_CAST(char*, mTargetPath.get()), + cmdLine, + NULL, /* security attributes for the new + * process */ + NULL, /* security attributes for the primary + * thread in the new process */ + FALSE, /* inherit handles */ + 0, /* creation flags */ + NULL, /* env */ + NULL, /* current drive and directory */ + &startupInfo, + &procInfo + ); + PR_FREEIF( cmdLine ); + if (blocking) { + + // if success, wait for process termination. the early returns and such + // are a bit ugly but preserving the logic of the nspr code I copied to + // minimize our risk abit. + + if ( retVal == TRUE ) { + DWORD dwRetVal; + unsigned long exitCode; + + dwRetVal = WaitForSingleObject(procInfo.hProcess, INFINITE); + if (dwRetVal == WAIT_FAILED) { + nsMemory::Free(my_argv); + return PR_FAILURE; + } + if (GetExitCodeProcess(procInfo.hProcess, &exitCode) == FALSE) { + mExitValue = exitCode; + nsMemory::Free(my_argv); + return PR_FAILURE; + } + mExitValue = exitCode; + CloseHandle(procInfo.hProcess); + } + else + rv = PR_FAILURE; + } + else { + + // map return value into success code + + if ( retVal == TRUE ) + rv = PR_SUCCESS; + else + rv = PR_FAILURE; + } + +#else + if ( blocking ) { + mProcess = PR_CreateProcess(mTargetPath.get(), my_argv, NULL, NULL); + if (mProcess) + rv = PR_WaitProcess(mProcess, &mExitValue); + } + else { + rv = PR_CreateProcessDetached(mTargetPath.get(), my_argv, NULL, NULL); + } +#endif + + // free up our argv + nsMemory::Free(my_argv); + + if (rv != PR_SUCCESS) + return NS_ERROR_FILE_EXECUTION_FAILED; + return NS_OK; +} + +NS_IMETHODIMP nsProcess::InitWithPid(PRUint32 pid) +{ + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsProcess::GetLocation(nsIFile** aLocation) +{ + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsProcess::GetPid(PRUint32 *aPid) +{ + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsProcess::GetProcessName(char** aProcessName) +{ + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsProcess::GetProcessSignature(PRUint32 *aProcessSignature) +{ + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsProcess::Kill() +{ + nsresult rv = NS_OK; + if (mProcess) + rv = PR_KillProcess(mProcess); + + return rv; +} + +NS_IMETHODIMP +nsProcess::GetExitValue(PRInt32 *aExitValue) +{ + *aExitValue = mExitValue; + + return NS_OK; +} |