From 16f504a9dca3fe3b70568f67b7d41241ae485288 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:49:04 +0200 Subject: Adding upstream version 7.0.6-dfsg. Signed-off-by: Daniel Baumann --- .../xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp | 443 +++++++++++++++++++++ 1 file changed, 443 insertions(+) create mode 100644 src/libs/xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp (limited to 'src/libs/xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp') diff --git a/src/libs/xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp b/src/libs/xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp new file mode 100644 index 00000000..241f795c --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/ds/nsRecyclingAllocator.cpp @@ -0,0 +1,443 @@ +/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 2001, 2002 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * Suresh Duddi + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* + * nsRecyclingAllocator + */ + +#include +#include +#include +#include "nsRecyclingAllocator.h" +#include "nsIMemory.h" +#include "nsAutoLock.h" +#include "prprf.h" +#include "nsITimer.h" +#ifdef VBOX_USE_IPRT_IN_XPCOM +# include +#endif + +#define NS_SEC_TO_MS(s) ((s) * 1000) + +void +nsRecyclingAllocator::nsRecycleTimerCallback(nsITimer *aTimer, void *aClosure) +{ + nsRecyclingAllocator *obj = (nsRecyclingAllocator *) aClosure; + if (!obj->mTouched) + { + if (obj->mFreeList) + obj->FreeUnusedBuckets(); + + // If we are holding no more memory, there is no need for the timer. + // We will revive the timer on the next allocation. + // XXX Unfortunately there is no way to Cancel and restart the same timer. + // XXX So we pretty much kill it and create a new one later. + if (!obj->mFreeList && obj->mRecycleTimer) + { + obj->mRecycleTimer->Cancel(); + NS_RELEASE(obj->mRecycleTimer); + } + } + else + { + // Clear touched so the next time the timer fires we can test whether + // the allocator was used or not. + obj->Untouch(); + } +} + + +nsRecyclingAllocator::nsRecyclingAllocator(PRUint32 nbucket, PRUint32 recycleAfter, const char *id) : + mMaxBlocks(nbucket), mBlocks(nsnull), mFreeList(nsnull), mNotUsedList(nsnull), + mRecycleTimer(nsnull), mRecycleAfter(recycleAfter), mTouched(0), mId(id) +#ifdef DEBUG + ,mNAllocated(0) +#endif +{ + NS_ASSERTION(mMaxBlocks <= NS_MAX_BLOCKS, "Too many blocks. This will affect the allocator's performance."); + + mLock = PR_NewLock(); + NS_ASSERTION(mLock, "Recycling allocator cannot get lock"); + + Init(nbucket, recycleAfter, id); +} + +nsresult +nsRecyclingAllocator::Init(PRUint32 nbucket, PRUint32 recycleAfter, const char *id) +{ + nsAutoLock lock(mLock); + + // Free all memory held, if any + while(mFreeList) + { +#ifdef VBOX_USE_IPRT_IN_XPCOM + RTMemFree(mFreeList->block); +#else + free(mFreeList->block); +#endif + mFreeList = mFreeList->next; + } + mFreeList = nsnull; + + if (mBlocks) + delete [] mBlocks; + + // Reinitialize everything + mMaxBlocks = nbucket; + if (nbucket) + { + // Create memory for our bookkeeping + mBlocks = new BlockStoreNode[mMaxBlocks]; + if (!mBlocks) + return NS_ERROR_OUT_OF_MEMORY; + // Link them together + mNotUsedList = mBlocks; + for (PRUint32 i=0; i < mMaxBlocks-1; i++) + mBlocks[i].next = &(mBlocks[i+1]); + } + + mRecycleAfter = recycleAfter; + mId = id; + + return NS_OK; +} + +nsRecyclingAllocator::~nsRecyclingAllocator() +{ + // Cancel and destroy recycle timer + if (mRecycleTimer) + { + mRecycleTimer->Cancel(); + NS_RELEASE(mRecycleTimer); + } + + // Free all memory held, if any + while(mFreeList) + { +#ifdef VBOX_USE_IPRT_IN_XPCOM + RTMemFree(mFreeList->block); +#else + free(mFreeList->block); +#endif + mFreeList = mFreeList->next; + } + mFreeList = nsnull; + + if (mBlocks) + delete [] mBlocks; + + if (mLock) + { + PR_DestroyLock(mLock); + mLock = nsnull; + } +} + +// Allocation and free routines +void* +nsRecyclingAllocator::Malloc(PRSize bytes, PRBool zeroit) +{ + // Mark that we are using. This will prevent any + // timer based release of unused memory. + Touch(); + + Block* freeBlock = FindFreeBlock(bytes); + if (freeBlock) + { + void *data = DATA(freeBlock); + + if (zeroit) + memset(data, 0, bytes); + return data; + } + + // We need to do an allocation + // Add 4 bytes to what we allocate to hold the bucket index + PRSize allocBytes = bytes + NS_ALLOCATOR_OVERHEAD_BYTES; + + // We dont have that memory already. Allocate. +#ifdef VBOX_USE_IPRT_IN_XPCOM + Block *ptr = (Block *) (zeroit ? RTMemAllocZ(allocBytes) : RTMemAlloc(allocBytes)); +#else + Block *ptr = (Block *) (zeroit ? calloc(1, allocBytes) : malloc(allocBytes)); +#endif + + // Deal with no memory situation + if (!ptr) + return ptr; + + // This is the first allocation we are holding. + // Setup timer for releasing memory + // If this fails, then we wont have a timer to release unused + // memory. We can live with that. Also, the next allocation + // will try again to set the timer. + if (mRecycleAfter && !mRecycleTimer) + { + // known only to stuff in xpcom. + extern nsresult NS_NewTimer(nsITimer* *aResult, nsTimerCallbackFunc aCallback, void *aClosure, + PRUint32 aDelay, PRUint32 aType); + + (void) NS_NewTimer(&mRecycleTimer, nsRecycleTimerCallback, this, + NS_SEC_TO_MS(mRecycleAfter), + nsITimer::TYPE_REPEATING_SLACK); + NS_ASSERTION(mRecycleTimer, "nsRecyclingAllocator: Creating timer failed.\n"); + } + +#ifdef DEBUG + mNAllocated++; +#endif + + // Store size and return data portion + ptr->bytes = bytes; + return DATA(ptr); +} + +void +nsRecyclingAllocator::Free(void *ptr) +{ + // Mark that we are using the allocator. This will prevent any + // timer based release of unused memory. + Touch(); + + Block* block = DATA_TO_BLOCK(ptr); + + if (!AddToFreeList(block)) + { + // We are holding more than max. Failover to free +#ifdef DEBUG_dp + char buf[1024]; + // Warn if we are failing over to malloc/free and not storing it + // This says we have a misdesigned memory pool. The intent was + // once the pool was full, we would never fail over to calloc. + PR_snprintf(buf, sizeof(buf), "nsRecyclingAllocator(%s) FAILOVER 0x%p (%d) - %d allocations, %d max\n", + mId, (char *)ptr, block->bytes, mNAllocated, mMaxBlocks); + NS_WARNING(buf); + mNAllocated--; +#endif +#ifdef VBOX_USE_IPRT_IN_XPCOM + RTMemFree(block); +#else + free(block); +#endif + } +} + +/* FreeUnusedBuckets + * + * Frees any bucket memory that isn't in use + */ + +void +nsRecyclingAllocator::FreeUnusedBuckets() +{ +#ifdef DEBUG_dp + printf("DEBUG: nsRecyclingAllocator(%s) FreeUnusedBuckets: ", mId); +#endif + nsAutoLock lock(mLock); + + // We will run through the freelist and free all blocks + BlockStoreNode* node = mFreeList; + while (node) + { + // Free the allocated block +#ifdef VBOX_USE_IPRT_IN_XPCOM + RTMemFree(node->block); +#else + free(node->block); +#endif + +#ifdef DEBUG_dp + printf("%d ", node->bytes); +#endif + // Clear Node + node->block = nsnull; + node->bytes = 0; + node = node->next; + } + + // remake the lists + mNotUsedList = mBlocks; + for (PRUint32 i=0; i < mMaxBlocks-1; i++) + mBlocks[i].next = &(mBlocks[i+1]); + mBlocks[mMaxBlocks-1].next = nsnull; + mFreeList = nsnull; + +#ifdef DEBUG + mNAllocated = 0; +#endif +#ifdef DEBUG_dp + printf("\n"); +#endif +} + +nsRecyclingAllocator::Block* +nsRecyclingAllocator::FindFreeBlock(PRSize bytes) +{ + // We dont enter lock for this check. This is intentional. + // Here is my logic: we are checking if (!mFreeList). Doing this check + // without locking can lead to unpredictable results. YES. But the effect + // of the unpredictedness are ok. here is why: + // + // a) if the check returned NULL when there is stuff in freelist + // We would just end up reallocating. + // + // b) if the check returned nonNULL when our freelist is empty + // This is the more likely and dangerous case. The code for + // FindFreeBlock() will enter lock, while (null) and return null. + // + // The reason why I chose to not enter lock for this check was that when + // the allocator is full, we dont want to impose any more overhead than + // we already are for failing over to malloc/free. + + if (!mFreeList) + return NULL; + + Block *block = nsnull; + + nsAutoLock lock(mLock); + BlockStoreNode* freeNode = mFreeList; + BlockStoreNode** prevp = &mFreeList; + + while (freeNode) + { + if (freeNode->bytes >= bytes) + { + // Found the best fit free block + block = freeNode->block; + + // Clear the free node + freeNode->block = nsnull; + freeNode->bytes = 0; + + // Remove free node from free list + *prevp = freeNode->next; + + // Add removed BlockStoreNode to not used list + freeNode->next = mNotUsedList; + mNotUsedList = freeNode; + + break; + } + + prevp = &(freeNode->next); + freeNode = freeNode->next; + } + return block; +} + +PRInt32 +nsRecyclingAllocator::AddToFreeList(Block* block) +{ + nsAutoLock lock(mLock); + + if (!mNotUsedList) + return PR_FALSE; + + // Pick a node from the not used list + BlockStoreNode *node = mNotUsedList; + mNotUsedList = mNotUsedList->next; + + // Initialize the node + node->bytes = block->bytes; + node->block = block; + + // Find the right spot in the sorted list. + BlockStoreNode* freeNode = mFreeList; + BlockStoreNode** prevp = &mFreeList; + while (freeNode) + { + if (freeNode->bytes >= block->bytes) + break; + prevp = &(freeNode->next); + freeNode = freeNode->next; + } + + // Needs to be inserted between *prevp and freeNode + *prevp = node; + node->next = freeNode; + + return PR_TRUE; +} + + +// ---------------------------------------------------------------------- +// Wrapping the recyling allocator with nsIMemory +// ---------------------------------------------------------------------- + +// nsIMemory methods +NS_IMPL_THREADSAFE_ISUPPORTS2(nsRecyclingAllocatorImpl, nsIMemory, nsIRecyclingAllocator) + +NS_IMETHODIMP_(void *) +nsRecyclingAllocatorImpl::Alloc(PRSize size) +{ + return nsRecyclingAllocatorImpl::Malloc(size, PR_FALSE); +} + +NS_IMETHODIMP_(void *) +nsRecyclingAllocatorImpl::Realloc(void *ptr, PRSize size) +{ + // XXX Not yet implemented + return NULL; +} + +NS_IMETHODIMP_(void) +nsRecyclingAllocatorImpl::Free(void *ptr) +{ + nsRecyclingAllocator::Free(ptr); +} + +NS_IMETHODIMP +nsRecyclingAllocatorImpl::Init(size_t nbuckets, size_t recycleAfter, const char *id) +{ + return nsRecyclingAllocator::Init((PRUint32) nbuckets, (PRUint32) recycleAfter, id); +} + +NS_IMETHODIMP +nsRecyclingAllocatorImpl::HeapMinimize(PRBool immediate) +{ + // XXX Not yet implemented + return NS_ERROR_NOT_IMPLEMENTED; +} + +NS_IMETHODIMP +nsRecyclingAllocatorImpl::IsLowMemory(PRBool *lowmemoryb_ptr) +{ + // XXX Not yet implemented + return NS_ERROR_NOT_IMPLEMENTED; +} + -- cgit v1.2.3