From 16f504a9dca3fe3b70568f67b7d41241ae485288 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:49:04 +0200 Subject: Adding upstream version 7.0.6-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/xpcom/io/nsIPipe.idl | 211 ++++++++++++++++++++++++++++++++ 1 file changed, 211 insertions(+) create mode 100644 src/libs/xpcom18a4/xpcom/io/nsIPipe.idl (limited to 'src/libs/xpcom18a4/xpcom/io/nsIPipe.idl') diff --git a/src/libs/xpcom18a4/xpcom/io/nsIPipe.idl b/src/libs/xpcom18a4/xpcom/io/nsIPipe.idl new file mode 100644 index 00000000..bbe3d978 --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/io/nsIPipe.idl @@ -0,0 +1,211 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#include "nsIAsyncInputStream.idl" +#include "nsIAsyncOutputStream.idl" + +interface nsIMemory; + +/** + * nsIPipe represents an in-process buffer that can be read using nsIInputStream + * and written using nsIOutputStream. The reader and writer of a pipe do not + * have to be on the same thread. As a result, the pipe is an ideal mechanism + * to bridge data exchange between two threads. For example, a worker thread + * might write data to a pipe from which the main thread will read. + * + * Each end of the pipe can be either blocking or non-blocking. Recall that a + * non-blocking stream will return NS_BASE_STREAM_WOULD_BLOCK if it cannot be + * read or written to without blocking the calling thread. For example, if you + * try to read from an empty pipe that has not yet been closed, then if that + * pipe's input end is non-blocking, then the read call will fail immediately + * with NS_BASE_STREAM_WOULD_BLOCK as the error condition. However, if that + * pipe's input end is blocking, then the read call will not return until the + * pipe has data or until the pipe is closed. This example presumes that the + * pipe is being filled asynchronously on some background thread. + * + * The pipe supports nsIAsyncInputStream and nsIAsyncOutputStream, which give + * the user of a non-blocking pipe the ability to wait for the pipe to become + * ready again. For example, in the case of an empty non-blocking pipe, the + * user can call AsyncWait on the input end of the pipe to be notified when + * the pipe has data to read (or when the pipe becomes closed). + * + * NS_NewPipe2 and NS_NewPipe provide convenient pipe constructors. In most + * cases nsIPipe is not actually used. It is usually enough to just get + * references to the pipe's input and output end. In which case, the pipe is + * automatically closed when the respective pipe ends are released. + */ +[scriptable, uuid(f4211abc-61b3-11d4-9877-00c04fa0cf4a)] +interface nsIPipe : nsISupports +{ + /** + * initialize this pipe + */ + void init(in boolean nonBlockingInput, + in boolean nonBlockingOutput, + in unsigned long segmentSize, + in unsigned long segmentCount, + in nsIMemory segmentAllocator); + + /** + * The pipe's input end, which also implements nsISearchableInputStream. + */ + readonly attribute nsIAsyncInputStream inputStream; + + /** + * The pipe's output end. + */ + readonly attribute nsIAsyncOutputStream outputStream; +}; + +/** + * XXX this interface doesn't really belong in here. It is here because + * currently nsPipeInputStream is the only implementation of this interface. + */ +[scriptable, uuid(8C39EF62-F7C9-11d4-98F5-001083010E9B)] +interface nsISearchableInputStream : nsISupports +{ + /** + * Searches for a string in the input stream. Since the stream has a notion + * of EOF, it is possible that the string may at some time be in the + * buffer, but is is not currently found up to some offset. Consequently, + * both the found and not found cases return an offset: + * if found, return offset where it was found + * if not found, return offset of the first byte not searched + * In the case the stream is at EOF and the string is not found, the first + * byte not searched will correspond to the length of the buffer. + */ + void search(in string forString, + in boolean ignoreCase, + out boolean found, + out unsigned long offsetSearchedTo); +}; + +%{C++ + +/** + * NS_NewPipe2 + * + * This function supercedes NS_NewPipe. It differs from NS_NewPipe in two + * major ways: + * (1) returns nsIAsyncInputStream and nsIAsyncOutputStream, so it is + * not necessary to QI in order to access these interfaces. + * (2) the size of the pipe is determined by the number of segments + * times the size of each segment. + * + * @param pipeIn + * resulting input end of the pipe + * @param pipeOut + * resulting output end of the pipe + * @param nonBlockingInput + * true specifies non-blocking input stream behavior + * @param nonBlockingOutput + * true specifies non-blocking output stream behavior + * @param segmentSize + * specifies the segment size in bytes (pass 0 to use default value) + * @param segmentCount + * specifies the max number of segments (pass 0 to use default value) + * passing PR_UINT32_MAX here causes the pipe to have "infinite" space. + * this mode can be useful in some cases, but should always be used with + * caution. the default value for this parameter is a finite value. + * @param segmentAlloc + * pass reference to nsIMemory to have all pipe allocations use this + * allocator (pass null to use the default allocator) + */ +extern NS_COM nsresult +NS_NewPipe2(nsIAsyncInputStream **pipeIn, + nsIAsyncOutputStream **pipeOut, + PRBool nonBlockingInput = PR_FALSE, + PRBool nonBlockingOutput = PR_FALSE, + PRUint32 segmentSize = 0, + PRUint32 segmentCount = 0, + nsIMemory *segmentAlloc = nsnull); + +/** + * NS_NewPipe + * + * Preserved for backwards compatibility. Plus, this interface is more + * amiable in certain contexts (e.g., when you don't need the pipe's async + * capabilities). + * + * @param pipeIn + * resulting input end of the pipe + * @param pipeOut + * resulting output end of the pipe + * @param segmentSize + * specifies the segment size in bytes (pass 0 to use default value) + * @param maxSize + * specifies the max size of the pipe (pass 0 to use default value) + * number of segments is maxSize / segmentSize, and maxSize must be a + * multiple of segmentSize. passing PR_UINT32_MAX here causes the + * pipe to have "infinite" space. this mode can be useful in some + * cases, but should always be used with caution. the default value + * for this parameter is a finite value. + * @param nonBlockingInput + * true specifies non-blocking input stream behavior + * @param nonBlockingOutput + * true specifies non-blocking output stream behavior + * @param segmentAlloc + * pass reference to nsIMemory to have all pipe allocations use this + * allocator (pass null to use the default allocator) + */ +inline nsresult +NS_NewPipe(nsIInputStream **pipeIn, + nsIOutputStream **pipeOut, + PRUint32 segmentSize = 0, + PRUint32 maxSize = 0, + PRBool nonBlockingInput = PR_FALSE, + PRBool nonBlockingOutput = PR_FALSE, + nsIMemory *segmentAlloc = nsnull) +{ + PRUint32 segmentCount; + if (segmentSize == 0) + segmentCount = 0; // use default + else + segmentCount = maxSize / segmentSize; + + nsIAsyncInputStream *in; + nsIAsyncOutputStream *out; + nsresult rv = NS_NewPipe2(&in, &out, nonBlockingInput, nonBlockingOutput, + segmentSize, segmentCount, segmentAlloc); + if (NS_FAILED(rv)) return rv; + + *pipeIn = in; + *pipeOut = out; + return NS_OK; +} + +%} -- cgit v1.2.3