From 16f504a9dca3fe3b70568f67b7d41241ae485288 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:49:04 +0200 Subject: Adding upstream version 7.0.6-dfsg. Signed-off-by: Daniel Baumann --- .../xpcom/obsolete/component/nsRegistry.cpp | 2019 ++++++++++++++++++++ 1 file changed, 2019 insertions(+) create mode 100644 src/libs/xpcom18a4/xpcom/obsolete/component/nsRegistry.cpp (limited to 'src/libs/xpcom18a4/xpcom/obsolete/component/nsRegistry.cpp') diff --git a/src/libs/xpcom18a4/xpcom/obsolete/component/nsRegistry.cpp b/src/libs/xpcom18a4/xpcom/obsolete/component/nsRegistry.cpp new file mode 100644 index 00000000..d3ecfe62 --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/obsolete/component/nsRegistry.cpp @@ -0,0 +1,2019 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#ifdef MOZ_LOGGING +#define FORCE_PR_LOG /* Allow logging in the release build */ +#endif + +#include "nsIGenericFactory.h" + +#include "nsRegistry.h" +#include "nsIEnumerator.h" +#include "nsDirectoryService.h" +#include "nsDirectoryServiceDefs.h" +#include "nsAppDirectoryServiceDefs.h" +#include "NSReg.h" +#include "prmem.h" +#include "prlock.h" +#include "prlog.h" +#include "prprf.h" +#include "nsCRT.h" +#include "nsMemory.h" + +#include "nsCOMPtr.h" +#include "nsILocalFile.h" +#include "nsIServiceManager.h" +#include "nsTextFormatter.h" + +#ifdef XP_BEOS +#include +#include +#endif + +/* extra locking for the paranoid */ +/* #define EXTRA_THREADSAFE */ +#ifndef EXTRA_THREADSAFE +#define PR_Lock(x) (void)0 +#define PR_Unlock(x) (void)0 +#endif + +// Logging of debug output +extern PRLogModuleInfo *nsComponentManagerLog; + +PRUnichar widestrFormat[] = { PRUnichar('%'),PRUnichar('s'),PRUnichar(0)}; + +/*-------------------------------- nsRegistry ---------------------------------- +| This class implements the nsIRegistry interface using the functions | +| provided by libreg (as declared in mozilla/modules/libreg/include/NSReg.h). | +| | +| Since that interface is designed to match the libreg function, this class | +| is implemented with each member function being a simple wrapper for the | +| corresponding libreg function. | +| | +| #define EXTRA_THREADSAFE if you are worried about libreg thread safety. | +| It should not be necessary, but I'll leave in the code for the paranoid. | +------------------------------------------------------------------------------*/ + +#define NS_MOZILLA_DIR_PERMISSION 00700 + +#include "nsRegistry.h" +/* +struct nsRegistry : public nsIRegistry { + // This class implements the nsISupports interface functions. + NS_DECL_ISUPPORTS + + // This class implements the nsIRegistry interface functions. + NS_DECL_NSIREGISTRY + + // ctor/dtor + nsRegistry(); + +private: + ~nsRegistry(); + +protected: + HREG mReg; // Registry handle. +#ifdef EXTRA_THREADSAFE + PRLock *mregLock; // libreg isn't threadsafe. Use locks to synchronize. +#endif + char *mCurRegFile; // these are to prevent open from opening the registry again + nsWellKnownRegistry mCurRegID; + + NS_IMETHOD Close(); +}; // nsRegistry +*/ + +#include "nsIFactory.h" +/*----------------------------- nsRegistryFactory ------------------------------ +| Class factory for nsRegistry objects. | +------------------------------------------------------------------------------*/ +struct nsRegistryFactory : public nsIFactory { + // This class implements the nsISupports interface functions. + NS_DECL_ISUPPORTS + + // nsIFactory methods + NS_IMETHOD CreateInstance(nsISupports *,const nsIID &,void **); + NS_IMETHOD LockFactory(PRBool aLock); + + // ctor + nsRegistryFactory(); +}; + + +/*--------------------------- nsRegSubtreeEnumerator --------------------------- +| This class implements the nsIEnumerator interface and is used to implement | +| the nsRegistry EnumerateSubtrees and EnumerateAllSubtrees functions. | +------------------------------------------------------------------------------*/ +struct nsRegSubtreeEnumerator : public nsIRegistryEnumerator { + // This class implements the nsISupports interface functions. + NS_DECL_ISUPPORTS + + // This class implements the nsIEnumerator interface functions. + NS_DECL_NSIENUMERATOR + + // And our magic behind-the-back fast-path thing. + NS_DECL_NSIREGISTRYENUMERATOR + + // ctor/dtor + nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ); + // virtual dtor since subclasses call our Release() + virtual ~nsRegSubtreeEnumerator(); + +protected: + NS_IMETHOD advance(); // Implementation file; does appropriate NR_RegEnum call. + HREG mReg; // Handle to registry we're affiliated with. + RKEY mKey; // Base key being enumerated. + char mName[MAXREGPATHLEN]; // The name of the current key which is in mNext + REGENUM mEnum; // Corresponding libreg "enumerator". + REGENUM mNext; // Lookahead value. + PRUint32 mStyle; // Style (indicates all or some); + PRBool mDone; // Done flag. +#ifdef EXTRA_THREADSAFE + PRLock *mregLock; +#endif +}; // nsRegSubtreeEnumerator + + +/*--------------------------- nsRegValueEnumerator ----------------------------- +| This class is a variation on nsRegSubtreeEnumerator that allocates | +| nsRegistryValue objects rather than nsRegistryNode objects. It also | +| overrides certain functions to make sure the "value" oriented libreg | +| functions used rather than the subtree oriented ones. | +------------------------------------------------------------------------------*/ +struct nsRegValueEnumerator : public nsRegSubtreeEnumerator { + // Override CurrentItem to allocate nsRegistryValue objects. + NS_IMETHOD CurrentItem( nsISupports **result ); + + // Override advance() to use proper NR_RegEnumEntries. + NS_IMETHOD advance(); + + // ctor/dtor + nsRegValueEnumerator( HREG hReg, RKEY rKey ); +}; // nsRegValueEnumerator + +/*------------------------------ nsRegistryNode -------------------------------- +| This class implements the nsIRegistryNode interface. Instances are | +| allocated by nsRegSubtreeEnumerator::CurrentItem. | +------------------------------------------------------------------------------*/ +struct nsRegistryNode : public nsIRegistryNode { + // This class implements the nsISupports interface functions. + NS_DECL_ISUPPORTS + + // This class implements the nsIRegistryNode interface functions. + NS_DECL_NSIREGISTRYNODE + + // ctor + nsRegistryNode( HREG hReg, char *name, RKEY childKey ); + +private: + ~nsRegistryNode(); + +protected: + HREG mReg; // Handle to registry this node is part of. + char mName[MAXREGPATHLEN]; // Buffer to hold name. + RKEY mChildKey; // Key corresponding to mName +#ifdef EXTRA_THREADSAFE + PRLock *mregLock; +#endif +}; // nsRegistryNode + + +/*------------------------------ nsRegistryValue ------------------------------- +| This class implements the nsIRegistryValue interface. Instances are | +| allocated by nsRegValueEnumerator::CurrentItem. | +------------------------------------------------------------------------------*/ +struct nsRegistryValue : public nsIRegistryValue { + // This class implements the nsISupports interface functions. + NS_DECL_ISUPPORTS + + // This class implements the nsIRegistryValue interface functions. + NS_DECL_NSIREGISTRYVALUE + + // ctor + nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ); + +private: + ~nsRegistryValue(); + +protected: + nsresult getInfo(); // Get registry info. + HREG mReg; // Handle to registry this node is part of. + RKEY mKey; // Key this node is under. + REGENUM mEnum; // Copy of corresponding content of parent enumerator. + REGINFO mInfo; // Value info. + char mName[MAXREGNAMELEN]; // Buffer to hold name. + REGERR mErr; // XXX This causes this class to be NON THREAD SAFE +#ifdef EXTRA_THREADSAFE + PRLock *mregLock; +#endif +}; // nsRegistryValue + + +/*----------------------------- regerr2nsresult -------------------------------- +| This utility function maps a REGERR value to a corresponding nsresult | +| error code. | +------------------------------------------------------------------------------*/ +static nsresult regerr2nsresult( REGERR err ) { + nsresult rv = NS_ERROR_UNEXPECTED; + switch( err ) { + case REGERR_OK: + rv = NS_OK; + break; + + case REGERR_FAIL: + rv = NS_ERROR_FAILURE; + break; + + case REGERR_NOMORE: + rv = NS_ERROR_REG_NO_MORE; + break; + + case REGERR_NOFIND: + rv = NS_ERROR_REG_NOT_FOUND; + break; + + case REGERR_PARAM: + case REGERR_BADTYPE: + case REGERR_BADNAME: + rv = NS_ERROR_INVALID_ARG; + break; + + case REGERR_NOFILE: + rv = NS_ERROR_REG_NOFILE; + break; + + case REGERR_MEMORY: + rv = NS_ERROR_OUT_OF_MEMORY; + break; + + case REGERR_BUFTOOSMALL: + rv = NS_ERROR_REG_BUFFER_TOO_SMALL; + break; + + case REGERR_NAMETOOLONG: + rv = NS_ERROR_REG_NAME_TOO_LONG; + break; + + case REGERR_NOPATH: + rv = NS_ERROR_REG_NO_PATH; + break; + + case REGERR_READONLY: + rv = NS_ERROR_REG_READ_ONLY; + break; + + case REGERR_BADUTF8: + rv = NS_ERROR_REG_BAD_UTF8; + break; + + } + return rv; +} + +/*----------------------------- reginfo2DataType ------------------------------- +| This utility function converts the type field in the REGINFO structure to | +| the corresponding nsIRegistry::DataType value. | +------------------------------------------------------------------------------*/ +static void reginfo2DataType( const REGINFO &in, PRUint32 &out ) { + // Transfer information, based on entry type. + switch( in.entryType ) { + case REGTYPE_ENTRY_STRING_UTF: + out = nsIRegistry::String; + //out.length = in.entryLength; + break; + + case REGTYPE_ENTRY_INT32_ARRAY: + out = nsIRegistry::Int32; + // Convert length in bytes to array dimension. + //out.length = in.entryLength / sizeof(PRInt32); + break; + + case REGTYPE_ENTRY_BYTES: + out = nsIRegistry::Bytes; + //out.length = in.entryLength; + break; + + case REGTYPE_ENTRY_FILE: + out = nsIRegistry::File; + //out.length = in.entryLength; + break; + } +} + +/*----------------------------- reginfo2DataType ------------------------------- +| This utility function converts the length field in the REGINFO structure to | +| the proper units (if type==Int32 array, we divide by sizeof(PRInt32)). | +------------------------------------------------------------------------------*/ +static void reginfo2Length( const REGINFO &in, PRUint32 &out ) { + // Transfer information, based on entry type. + switch( in.entryType ) { + case REGTYPE_ENTRY_STRING_UTF: + out = in.entryLength; + break; + + case REGTYPE_ENTRY_INT32_ARRAY: + // Convert length in bytes to array dimension. + out = in.entryLength / sizeof(PRInt32); + break; + + case REGTYPE_ENTRY_BYTES: + out = in.entryLength; + break; + + case REGTYPE_ENTRY_FILE: + out = in.entryLength; + break; + } +} + +/*------------------------ nsISupports Implementation -------------------------- +| This code generates the implementation of the nsISupports member functions | +| for each class implemented in this file. | +------------------------------------------------------------------------------*/ +NS_IMPL_THREADSAFE_ISUPPORTS2(nsRegistry, nsIRegistry, nsIRegistryGetter) +NS_IMPL_ISUPPORTS2( nsRegSubtreeEnumerator, nsIEnumerator, + nsIRegistryEnumerator) +NS_IMPL_ISUPPORTS1( nsRegistryNode, nsIRegistryNode ) +NS_IMPL_ISUPPORTS1( nsRegistryValue, nsIRegistryValue ) + +/*-------------------------- nsRegistry::nsRegistry ---------------------------- +| Vanilla nsRegistry constructor. | +------------------------------------------------------------------------------*/ +nsRegistry::nsRegistry() + : mReg(0), mCurRegID(0) { +#ifdef EXTRA_THREADSAFE + mregLock = PR_NewLock(); +#endif + NR_StartupRegistry(); + return; +} + +/*------------------------- nsRegistry::~nsRegistry ---------------------------- +| The dtor closes the registry file(if open). | +------------------------------------------------------------------------------*/ +nsRegistry::~nsRegistry() { + if( mReg ) { + Close(); + } +#ifdef EXTRA_THREADSAFE + if (mregLock) { + PR_DestroyLock(mregLock); + } +#endif + NR_ShutdownRegistry(); + return; +} + +/*----------------------------- nsRegistry::Open ------------------------------- +| If the argument is null, delegate to OpenDefault, else open the registry | +| file. We first check to see if a registry file is already open and close | +| it if so. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::Open( nsIFile *regFile ) { + REGERR err = REGERR_OK; + + // Check for default. + if( !regFile ) { + return OpenWellKnownRegistry(nsIRegistry::ApplicationRegistry); + } + + nsCAutoString regPath; + nsresult rv = regFile->GetNativePath(regPath); + if (NS_FAILED(rv)) return rv; + +#ifdef DEBUG_dp + printf("nsRegistry: Opening registry %s\n", regPath.get()); +#endif /* DEBUG_dp */ + + if (mCurRegID != nsIRegistry::None && mCurRegID != nsIRegistry::ApplicationCustomRegistry) + { + // Cant open another registry without closing explictly. + return NS_ERROR_INVALID_ARG; + } + + // Do we have an open registry ? + if (mCurRegID != nsIRegistry::None) + { + PRBool equals; + if (mCurRegFile && NS_SUCCEEDED(mCurRegFile->Equals(regFile, &equals)) && equals) + { + // The right one is already open + return NS_OK; + } + else + { + // Opening a new registry without closing an already open one. + // This is an error. + return NS_ERROR_FAILURE; + } + } + + // Open specified registry. + PR_Lock(mregLock); + err = NR_RegOpen(NS_CONST_CAST(char*,regPath.get()), &mReg); + PR_Unlock(mregLock); + + mCurRegID = nsIRegistry::ApplicationCustomRegistry; + + // No error checking for no mem. Trust me. + if (NS_FAILED(regFile->Clone(getter_AddRefs(mCurRegFile)))) + mCurRegFile = nsnull; // not fatal + + // Convert the result. + return regerr2nsresult( err ); +} + +static void +EnsureDefaultRegistryDirectory() { +#if defined(XP_UNIX) && !defined(XP_MACOSX) + // Create ~/.mozilla as that is the default place for the registry file + + /* The default registry on the unix system is $HOME/.mozilla/registry per + * vr_findGlobalRegName(). vr_findRegFile() will create the registry file + * if it doesn't exist. But it wont create directories. + * + * Hence we need to create the directory if it doesn't exist already. + * + * Why create it here as opposed to the app ? + * ------------------------------------------ + * The app cannot create the directory in main() as most of the registry + * and initialization happens due to use of static variables. + * And we dont want to be dependent on the order in which + * these static stuff happen. + * + * Permission for the $HOME/.mozilla will be Read,Write,Execute + * for user only. Nothing to group and others. + */ + char *home = getenv("HOME"); + if (home != NULL) + { + char dotMozillaDir[1024]; + PR_snprintf(dotMozillaDir, sizeof(dotMozillaDir), + "%s/" MOZ_USER_DIR, home); + if (PR_Access(dotMozillaDir, PR_ACCESS_EXISTS) != PR_SUCCESS) + { + PR_MkDir(dotMozillaDir, NS_MOZILLA_DIR_PERMISSION); + PR_LOG(nsComponentManagerLog, PR_LOG_ALWAYS, + ("nsComponentManager: Creating Directory %s", dotMozillaDir)); + } + } +#endif /* XP_UNIX */ + +#ifdef XP_BEOS + BPath p; + const char *settings = "/boot/home/config/settings"; + if(find_directory(B_USER_SETTINGS_DIRECTORY, &p) == B_OK) + settings = p.Path(); + char settingsMozillaDir[1024]; + PR_snprintf(settingsMozillaDir, sizeof(settingsMozillaDir), + "%s/" MOZ_USER_DIR, settings); + if (PR_Access(settingsMozillaDir, PR_ACCESS_EXISTS) != PR_SUCCESS) { + PR_MkDir(settingsMozillaDir, NS_MOZILLA_DIR_PERMISSION); + PR_LOG(nsComponentManagerLog, PR_LOG_ALWAYS, + ("nsComponentManager: Creating Directory %s", settingsMozillaDir)); + } +#endif +} + +/*----------------------------- nsRegistry::OpenWellKnownRegistry -------------- +| Takes a registry id and maps that to a file name for opening. We first check | +| to see if a registry file is already open and close it if so. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::OpenWellKnownRegistry( nsWellKnownRegistry regid ) +{ + REGERR err = REGERR_OK; + + if (mCurRegID != nsIRegistry::None && mCurRegID != regid) + { + // Cant open another registry without closing explictly. + return NS_ERROR_INVALID_ARG; + } + + if (mCurRegID == regid) + { + // Already opened. + return NS_OK; + } + + nsresult rv; + nsCOMPtr registryLocation; + + PRBool foundReg = PR_FALSE; + nsCAutoString regFile; + + switch ( (nsWellKnownRegistry) regid ) { + case ApplicationComponentRegistry: + NS_WARNING("ApplicationComponentRegistry is unsupported!"); + break; + case ApplicationRegistry: + { + EnsureDefaultRegistryDirectory(); + nsCOMPtr directoryService = do_GetService(NS_DIRECTORY_SERVICE_CONTRACTID, &rv); + if (NS_FAILED(rv)) return rv; + directoryService->Get(NS_APP_APPLICATION_REGISTRY_FILE, NS_GET_IID(nsIFile), + getter_AddRefs(registryLocation)); + + if (registryLocation) + { + foundReg = PR_TRUE; + rv = registryLocation->GetNativePath(regFile); // dougt fix... + // dveditz needs to fix his registry so that I can pass an + // nsIFile interface and not hack + if (NS_FAILED(rv)) + return rv; + } + } + break; + + default: + break; + } + + if (foundReg == PR_FALSE) { + return NS_ERROR_REG_BADTYPE; + } + +#ifdef DEBUG_dp + printf("nsRegistry: Opening std registry %s\n", regFile.get()); +#endif /* DEBUG_dp */ + + PR_Lock(mregLock); + err = NR_RegOpen(NS_CONST_CAST(char*, regFile.get()), &mReg ); + PR_Unlock(mregLock); + + // Store the registry that was opened for optimizing future opens. + mCurRegID = regid; + + // Convert the result. + return regerr2nsresult( err ); +} + +#if 0 +/*-------------------------- nsRegistry::OpenDefault --------------------------- +| Open the "default" registry; in the case of this libreg-based implementation | +| that is done by passing a null file name pointer to NR_RegOpen. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::OpenDefault() { + return OpenWellKnownRegistry(nsIRegistry::ApplicationRegistry); +} +#endif + +/*----------------------------- nsRegistry::Close ------------------------------ +| Tests the mReg handle and if non-null, closes the registry via NR_RegClose. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::Close() { + REGERR err = REGERR_OK; + if( mReg ) { + PR_Lock(mregLock); + err = NR_RegClose( mReg ); + PR_Unlock(mregLock); + mReg = 0; + mCurRegFile = nsnull; + mCurRegID = 0; + } + return regerr2nsresult( err ); +} + +/*----------------------------- nsRegistry::Flush ------------------------------ +| Flushes the registry via NR_RegFlush. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::Flush() { + REGERR err = REGERR_FAIL; + if( mReg ) { + PR_Lock(mregLock); + err = NR_RegFlush( mReg ); + PR_Unlock(mregLock); + } + return regerr2nsresult( err ); +} + +/*----------------------------- nsRegistry::IsOpen ----------------------------- +| Tests the mReg handle and returns whether the registry is open or not. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::IsOpen( PRBool *result ) { + *result = ( mReg != 0 ); + return NS_OK; +} + + +/*--------------------------- nsRegistry::AddKey ------------------------------- +| Add a key into the registry or find an existing one. This is generally used | +| instead of GetKey unless it's an error for the key not to exist already i +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::AddKey( nsRegistryKey baseKey, const PRUnichar *keyname, nsRegistryKey *_retval) +{ + if ( !keyname ) + return NS_ERROR_NULL_POINTER; + + return AddSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get(), _retval ); +} + +/*--------------------------- nsRegistry::GetKey ------------------------------- +| returns the nsRegistryKey associated with a given node in the registry | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetKey(nsRegistryKey baseKey, const PRUnichar *keyname, nsRegistryKey *_retval) +{ + if ( !keyname || !_retval ) + return NS_ERROR_NULL_POINTER; + + return GetSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get(), _retval ); +} + +/*--------------------------- nsRegistry::RemoveKey ---------------------------- +| Delete a key from the registry | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::RemoveKey(nsRegistryKey baseKey, const PRUnichar *keyname) +{ + if ( !keyname ) + return NS_ERROR_NULL_POINTER; + + return RemoveSubtree( baseKey, NS_ConvertUCS2toUTF8(keyname).get() ); +} + +NS_IMETHODIMP nsRegistry::GetString(nsRegistryKey baseKey, const PRUnichar *valname, PRUnichar **_retval) +{ + // Make sure caller gave us place for result. + if ( !valname || !_retval ) + return NS_ERROR_NULL_POINTER; + + // initialize the return value + *_retval = nsnull; + nsXPIDLCString tmpstr; + + nsresult rv = GetStringUTF8( baseKey, NS_ConvertUCS2toUTF8(valname).get(), getter_Copies(tmpstr) ); + + if (NS_SUCCEEDED(rv)) + { + *_retval = nsTextFormatter::smprintf( widestrFormat, tmpstr.get() ); + if ( *_retval == nsnull ) + rv = NS_ERROR_OUT_OF_MEMORY; + } + + return rv; +} + +NS_IMETHODIMP nsRegistry::SetString(nsRegistryKey baseKey, const PRUnichar *valname, const PRUnichar *value) +{ + if ( !valname || ! value ) + return NS_ERROR_NULL_POINTER; + + return SetStringUTF8( baseKey, + NS_ConvertUCS2toUTF8(valname).get(), + NS_ConvertUCS2toUTF8(value).get() ); +} + +/*--------------------------- nsRegistry::GetString ---------------------------- +| First, look for the entry using GetValueInfo. If found, and it's a string, | +| allocate space for it and fetch the value. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetStringUTF8( nsRegistryKey baseKey, const char *path, char **result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + + // Make sure caller gave us place for result. + if ( !result ) + return NS_ERROR_NULL_POINTER; + + char regStr[MAXREGPATHLEN]; + + // initialize the return value + *result = 0; + + // Attempt to get string into our fixed buffer + PR_Lock(mregLock); + err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, regStr, + sizeof(regStr) ); + PR_Unlock(mregLock); + + if ( err == REGERR_OK ) + { + *result = nsCRT::strdup(regStr); + if (!*result) + rv = NS_ERROR_OUT_OF_MEMORY; + } + else if ( err == REGERR_BUFTOOSMALL ) + { + // find the real size and malloc it + PRUint32 length; + rv = GetValueLength( baseKey, path, &length ); + // See if that worked. + if( rv == NS_OK ) + { + *result =(char*)nsMemory::Alloc( length + 1 ); + if( *result ) + { + // Get string from registry into result buffer. + PR_Lock(mregLock); + err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, *result, length+1 ); + PR_Unlock(mregLock); + + // Convert status. + rv = regerr2nsresult( err ); + if ( rv != NS_OK ) + { + // Didn't get result, free buffer + nsCRT::free( *result ); + *result = 0; + } + } + else + { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } + } + else + { + // Convert status. + rv = regerr2nsresult( err ); + NS_ASSERTION(NS_FAILED(rv), "returning success code on failure"); + } + + return rv; +} + +NS_IMETHODIMP +nsRegistry::GetStringUTF8IntoBuffer( nsRegistryKey baseKey, const char *path, + char *buf, PRUint32 *length ) +{ + REGERR err = REGERR_OK; + + // Attempt to get string into our fixed buffer + PR_Lock(mregLock); + err = NR_RegGetEntryString( mReg,(RKEY)baseKey,(char*)path, buf, *length ); + PR_Unlock(mregLock); + + // Convert status. + nsresult rv = regerr2nsresult( err ); + + if (rv == NS_ERROR_REG_BUFFER_TOO_SMALL) { + // fill length with the actual length + nsresult rv1 = GetValueLength( baseKey, path, length ); + if(NS_FAILED(rv1)) + return rv1; + } + + return rv; +} + +/*--------------------------- nsRegistry::SetString ---------------------------- +| Simply sets the registry contents using NR_RegSetEntryString. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::SetStringUTF8( nsRegistryKey baseKey, const char *path, const char *value ) { + REGERR err = REGERR_OK; + // Set the contents. + PR_Lock(mregLock); + err = NR_RegSetEntryString( mReg,(RKEY)baseKey,(char*)path,(char*)value ); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + +/*---------------------------- nsRegistry::GetBytesUTF8 ------------------------------ +| This function is just shorthand for fetching a char array. We | +| implement it "manually" using NR_RegGetEntry | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetBytesUTF8( nsRegistryKey baseKey, const char *path, PRUint32* length, PRUint8** result) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + + if ( !result ) + return NS_ERROR_NULL_POINTER; + + char regStr[MAXREGPATHLEN]; + + // initialize the return value + *length = 0; + *result = 0; + + // Get info about the requested entry. + PRUint32 type; + rv = GetValueType( baseKey, path, &type ); + // See if that worked. + if( rv == NS_OK ) + { + // Make sure the entry is an PRInt8 array. + if( type == Bytes ) + { + // Attempt to get string into our fixed buffer + PR_Lock(mregLock); + uint32 length2 = sizeof regStr; + err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), regStr, &length2); + PR_Unlock(mregLock); + + if ( err == REGERR_OK ) + { + *length = length2; + *result = (PRUint8*)(nsCRT::strdup(regStr)); + if (!*result) + { + rv = NS_ERROR_OUT_OF_MEMORY; + *length = 0; + } + else + { + *length = length2; + } + } + else if ( err == REGERR_BUFTOOSMALL ) + { + // find the real size and malloc it + rv = GetValueLength( baseKey, path, length ); + // See if that worked. + if( rv == NS_OK ) + { + *result = NS_REINTERPRET_CAST(PRUint8*,nsMemory::Alloc( *length )); + if( *result ) + { + // Get bytes from registry into result field. + PR_Lock(mregLock); + length2 = *length; + err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), *result, &length2); + *length = length2; + PR_Unlock(mregLock); + // Convert status. + rv = regerr2nsresult( err ); + if ( rv != NS_OK ) + { + // Didn't get result, free buffer + nsCRT::free( NS_REINTERPRET_CAST(char*, *result) ); + *result = 0; + *length = 0; + } + } + else + { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } + } + } + else + { + // They asked for the wrong type of value. + rv = NS_ERROR_REG_BADTYPE; + } + } + return rv; +} + +NS_IMETHODIMP +nsRegistry::GetBytesUTF8IntoBuffer( nsRegistryKey baseKey, const char *path, + PRUint8 *buf, PRUint32* length ) +{ + REGERR err = REGERR_OK; + + // Get info about the requested entry. + PRUint32 type; + nsresult rv = GetValueType( baseKey, path, &type ); + // See if that worked. + if(NS_FAILED(rv)) + return rv; + // Make sure we are dealing with bytes + if (type != Bytes) + return NS_ERROR_REG_BADTYPE; + + // Attempt to get bytes into our fixed buffer + PR_Lock(mregLock); + err = NR_RegGetEntry( mReg,(RKEY)baseKey,NS_CONST_CAST(char*,path), + buf, (uint32 *)length ); + PR_Unlock(mregLock); + + rv = regerr2nsresult(rv); + + if (rv == NS_ERROR_REG_BUFFER_TOO_SMALL) { + // fill length with the actual length + nsresult rv1 = GetValueLength( baseKey, path, length ); + if(NS_FAILED(rv1)) + return rv1; + } + + + return rv; +} + +/*---------------------------- nsRegistry::GetInt ------------------------------ +| This function is just shorthand for fetching a 1-element PRInt32 array. We | +| implement it "manually" using NR_RegGetEntry | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetInt( nsRegistryKey baseKey, const char *path, PRInt32 *result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + + // Make sure caller gave us place for result. + if( result ) { + // Get info about the requested entry. + PRUint32 type; + rv = GetValueType( baseKey, path, &type ); + // See if that worked. + if( rv == NS_OK ) { + // Make sure the entry is an PRInt32 array. + if( type == Int32 ) { + uint32 len = sizeof *result; + // Get int from registry into result field. + PR_Lock(mregLock); + err = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path, result, &len ); + PR_Unlock(mregLock); + // Convert status. + rv = regerr2nsresult( err ); + } else { + // They asked for the wrong type of value. + rv = NS_ERROR_REG_BADTYPE; + } + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + + +/*---------------------------- nsRegistry::GetLongLong-------------------------- +| This function is just shorthand for fetching a 1-element PRInt64 array. We | +| implement it "manually" using NR_RegGetEntry | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetLongLong( nsRegistryKey baseKey, const char *path, PRInt64 *result ) { + REGERR err = REGERR_OK; + + PR_Lock(mregLock); + + uint32 length = sizeof(PRInt64); + err = NR_RegGetEntry( mReg,(RKEY)baseKey,(char*)path,(void*)result,&length); + + PR_Unlock(mregLock); + + // Convert status. + return regerr2nsresult( err ); +} +/*---------------------------- nsRegistry::SetBytesUTF8 ------------------------------ +| Write out the value as a char array, using NR_RegSetEntry. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::SetBytesUTF8( nsRegistryKey baseKey, const char *path, PRUint32 length, PRUint8* value) { + REGERR err = REGERR_OK; + // Set the contents. + PR_Lock(mregLock); + err = NR_RegSetEntry( mReg, + (RKEY)baseKey, + (char*)path, + REGTYPE_ENTRY_BYTES, + (char*)value, + length); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + +/*---------------------------- nsRegistry::SetInt ------------------------------ +| Write out the value as a one-element PRInt32 array, using NR_RegSetEntry. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::SetInt( nsRegistryKey baseKey, const char *path, PRInt32 value ) { + REGERR err = REGERR_OK; + // Set the contents. + PR_Lock(mregLock); + err = NR_RegSetEntry( mReg, + (RKEY)baseKey, + (char*)path, + REGTYPE_ENTRY_INT32_ARRAY, + &value, + sizeof value ); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + + + +/*---------------------------- nsRegistry::SetLongLong--------------------------- +| Write out the value as a one-element PRInt64 array, using NR_RegSetEntry. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::SetLongLong( nsRegistryKey baseKey, const char *path, PRInt64* value ) { + REGERR err = REGERR_OK; + // Set the contents. + PR_Lock(mregLock); + + err = NR_RegSetEntry( mReg, + (RKEY)baseKey, + (char*)path, + REGTYPE_ENTRY_BYTES, + (void*)value, + sizeof(PRInt64) ); + + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + +/*-------------------------- nsRegistry::AddSubtree ---------------------------- +| Add a new registry subkey with the specified name, using NR_RegAddKey. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::AddSubtree( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { + REGERR err = REGERR_OK; + // Add the subkey. + PR_Lock(mregLock); + err = NR_RegAddKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + +/*-------------------------- nsRegistry::AddSubtreeRaw-------------------------- +| Add a new registry subkey with the specified name, using NR_RegAddKeyRaw | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::AddSubtreeRaw( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { + REGERR err = REGERR_OK; + // Add the subkey. + PR_Lock(mregLock); + err = NR_RegAddKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + + +/*------------------------- nsRegistry::RemoveSubtree -------------------------- +| Deletes the subtree at a given location using NR_RegDeleteKey. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::RemoveSubtree( nsRegistryKey baseKey, const char *path ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + + // libreg doesn't delete keys if there are subkeys under the key + // Hence we have to recurse through to delete the subtree + + RKEY key; + + PR_Lock(mregLock); + err = NR_RegGetKey(mReg, baseKey, (char *)path, &key); + PR_Unlock(mregLock); + if (err != REGERR_OK) + { + rv = regerr2nsresult( err ); + return rv; + } + + // Now recurse through and delete all keys under hierarchy + + char subkeyname[MAXREGPATHLEN+1]; + REGENUM state = 0; + subkeyname[0] = '\0'; + while (NR_RegEnumSubkeys(mReg, key, &state, subkeyname, sizeof(subkeyname), + REGENUM_NORMAL) == REGERR_OK) + { +#ifdef DEBUG_dp + printf("...recursing into %s\n", subkeyname); +#endif /* DEBUG_dp */ + // Even though this is not a "Raw" API the subkeys may still, in fact, + // *be* raw. Since we're recursively deleting this will work either way. + // If we were guaranteed none would be raw then a depth-first enumeration + // would be much more efficient. + err = RemoveSubtreeRaw(key, subkeyname); + if (err != REGERR_OK) break; + } + + // If success in deleting all subkeys, delete this key too + if (err == REGERR_OK) + { +#ifdef DEBUG_dp + printf("...deleting %s\n", path); +#endif /* DEBUG_dp */ + PR_Lock(mregLock); + err = NR_RegDeleteKey(mReg, baseKey, (char *)path); + PR_Unlock(mregLock); + } + + // Convert result. + rv = regerr2nsresult( err ); + return rv; +} + + +/*------------------------- nsRegistry::RemoveSubtreeRaw ----------------------- +| Deletes the subtree at a given location using NR_RegDeleteKeyRaw | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::RemoveSubtreeRaw( nsRegistryKey baseKey, const char *keyname ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + + // libreg doesn't delete keys if there are subkeys under the key + // Hence we have to recurse through to delete the subtree + + RKEY key; + char subkeyname[MAXREGPATHLEN+1]; + int n = sizeof(subkeyname); + REGENUM state = 0; + + PR_Lock(mregLock); + err = NR_RegGetKeyRaw(mReg, baseKey, (char *)keyname, &key); + PR_Unlock(mregLock); + if (err != REGERR_OK) + { + rv = regerr2nsresult( err ); + return rv; + } + + // Now recurse through and delete all keys under hierarchy + + subkeyname[0] = '\0'; + while (NR_RegEnumSubkeys(mReg, key, &state, subkeyname, n, REGENUM_NORMAL) == REGERR_OK) + { +#ifdef DEBUG_dp + printf("...recursing into %s\n", subkeyname); +#endif /* DEBUG_dp */ + err = RemoveSubtreeRaw(key, subkeyname); + if (err != REGERR_OK) break; + } + + // If success in deleting all subkeys, delete this key too + if (err == REGERR_OK) + { +#ifdef DEBUG_dp + printf("...deleting %s\n", keyname); +#endif /* DEBUG_dp */ + PR_Lock(mregLock); + err = NR_RegDeleteKeyRaw(mReg, baseKey, (char *)keyname); + PR_Unlock(mregLock); + } + + // Convert result. + rv = regerr2nsresult( err ); + return rv; +} +/*-------------------------- nsRegistry::GetSubtree ---------------------------- +| Returns a nsRegistryKey(RKEY) for a given key/path. The key is | +| obtained using NR_RegGetKey. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetSubtree( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Make sure we have a place for the result. + if( result ) { + // Get key. + PR_Lock(mregLock); + err = NR_RegGetKey( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); + PR_Unlock(mregLock); + // Convert result. + rv = regerr2nsresult( err ); + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*-------------------------- nsRegistry::GetSubtreeRaw-------------------------- +| Returns a nsRegistryKey(RKEY) for a given key/path. The key is | +| obtained using NR_RegGetKeyRaw. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetSubtreeRaw( nsRegistryKey baseKey, const char *path, nsRegistryKey *result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Make sure we have a place for the result. + if( result ) { + // Get key. + PR_Lock(mregLock); + err = NR_RegGetKeyRaw( mReg,(RKEY)baseKey,(char*)path,(RKEY*)result ); + PR_Unlock(mregLock); + // Convert result. + rv = regerr2nsresult( err ); + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + + +/*----------------------- nsRegistry::EnumerateSubtrees ------------------------ +| Allocate a nsRegSubtreeEnumerator object and return it to the caller. | +| We construct the enumerator using the registry handle from this registry | +| object, the user-specified registry key, and indicate that we don't want | +| to recurse down subtrees. No libreg functions are invoked at this point | +|(that will happen when the enumerator member functions are called). | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::EnumerateSubtrees( nsRegistryKey baseKey, nsIEnumerator **result ) { + nsresult rv = NS_OK; + // Make sure we have a place to put the result. + if( result ) { + *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_FALSE ); + // Check for success. + if( *result ) { + // Bump refcnt on behalf of caller. + NS_ADDREF(*result); + } else { + // Unable to allocate space for the enumerator object. + rv = NS_ERROR_OUT_OF_MEMORY; + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*--------------------- nsRegistry::EnumerateAllSubtrees ----------------------- +| Same as EnumerateSubtrees but we pass PR_TRUE to request that the | +| enumerator object descend subtrees when it is used. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::EnumerateAllSubtrees( nsRegistryKey baseKey, nsIEnumerator **result ) { + nsresult rv = NS_OK; + // Make sure we have a place to put the result. + if( result ) { + *result = new nsRegSubtreeEnumerator( mReg,(RKEY)baseKey, PR_TRUE ); + // Check for success. + if( *result ) { + // Bump refcnt on behalf of caller. + NS_ADDREF(*result); + } else { + // Unable to allocate space for the enumerator object. + rv = NS_ERROR_OUT_OF_MEMORY; + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*------------------------- nsRegistry::GetValueType --------------------------- +| Gets the type from the registry using the NR_GetEntryInfo libreg API. | +| The result is transferred to the PRUint32 value passed in (with conversion | +| to the appropriate nsIRegistry::DataType value). | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetValueType( nsRegistryKey baseKey, const char *path, PRUint32 *result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Make sure we have a place to put the result. + if( result ) { + // Get registry info into local structure. + REGINFO info = { sizeof info, 0, 0 }; + PR_Lock(mregLock); + err = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); + PR_Unlock(mregLock); + if( err == REGERR_OK ) { + // Copy info to user's result value. + reginfo2DataType( info, *result ); + } else { + rv = regerr2nsresult( err ); + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*------------------------ nsRegistry::GetValueLength -------------------------- +| Gets the registry value info via NR_RegGetEntryInfo. The length is | +| converted to the proper "units" via reginfo2Length. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetValueLength( nsRegistryKey baseKey, const char *path, PRUint32 *result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Make sure we have a place to put the result. + if( result ) { + // Get registry info into local structure. + REGINFO info = { sizeof info, 0, 0 }; + PR_Lock(mregLock); + err = NR_RegGetEntryInfo( mReg,(RKEY)baseKey,(char*)path, &info ); + PR_Unlock(mregLock); + if( err == REGERR_OK ) { + // Copy info to user's result value. + reginfo2Length( info, *result ); + } else { + rv = regerr2nsresult( err ); + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*-------------------------- nsRegistry::DeleteValue --------------------------- +| Remove the registry value with the specified name | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::DeleteValue( nsRegistryKey baseKey, const char *path) +{ + REGERR err = REGERR_OK; + // Delete the value + PR_Lock(mregLock); + err = NR_RegDeleteEntry( mReg,(RKEY)baseKey,(char*)path ); + PR_Unlock(mregLock); + // Convert result. + return regerr2nsresult( err ); +} + +/*------------------------ nsRegistry::EnumerateValues ------------------------- +| Allocates and returns an instance of nsRegValueEnumerator constructed in | +| a similar fashion as the nsRegSubtreeEnumerator is allocated/returned by | +| EnumerateSubtrees. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::EnumerateValues( nsRegistryKey baseKey, nsIEnumerator **result ) { + nsresult rv = NS_OK; + // Make sure we have a place to put the result. + if( result ) { + *result = new nsRegValueEnumerator( mReg,(RKEY)baseKey ); + // Check for success. + if( *result ) { + // Bump refcnt on behalf of caller. + NS_ADDREF(*result); + } else { + // Unable to allocate space for the enumerator object. + rv = NS_ERROR_OUT_OF_MEMORY; + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*---------------------- nsRegistry::GetCurrentUserName ------------------------ +| Simple wrapper for NR_RegGetUsername. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::GetCurrentUserName( char **result ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Make sure we have a place to put the result. + if( result ) { + // Get the user name. + PR_Lock(mregLock); + err = NR_RegGetUsername( result ); + PR_Unlock(mregLock); + // Convert the result. + rv = regerr2nsresult( err ); + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*---------------------- nsRegistry::SetCurrentUserName ------------------------ +| Simple wrapper for NR_RegSetUsername. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::SetCurrentUserName( const char *name ) { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Set the user name. + PR_Lock(mregLock); + err = NR_RegSetUsername( name ); + PR_Unlock(mregLock); + // Convert result. + rv = regerr2nsresult( err ); + return rv; +} + +/*----------------------------- nsRegistry::Pack ------------------------------- +| Simple wrapper for NR_RegPack. We don't set up any callback. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::Pack() { + nsresult rv = NS_OK; + REGERR err = REGERR_OK; + // Pack the registry. + PR_Lock(mregLock); + err = NR_RegPack( mReg, 0, 0 ); + PR_Unlock(mregLock); + // Convert result. + rv = regerr2nsresult( err ); + return rv; +} + +/*----------------------------- nsRegistry::EscapeKey ------------------------------- +| Escape a binary key so that the registry works OK, since it expects UTF8 +| with no slashes or control characters. This is probably better than raw. +| If no escaping is required, then the method is successful and a null is +| returned, indicating that the caller should use the original string. +------------------------------------------------------------------------------*/ +static const char sEscapeKeyHex[] = "0123456789abcdef0123456789ABCDEF"; +NS_IMETHODIMP nsRegistry::EscapeKey(PRUint8* key, PRUint32 termination, PRUint32* length, PRUint8** escaped) +{ + nsresult rv = NS_OK; + char* value = (char*)key; + char* b = value; + char* e = b + *length; + int escapees = 0; + while (b < e) // Count characters outside legal range or slash + { + int c = *b++; + if (c <= ' ' + || c > '~' + || c == '/' + || c == '%') + { + escapees++; + } + } + if (escapees == 0) // If no escapees, then no results + { + *length = 0; + *escaped = nsnull; + return NS_OK; + } + // New length includes two extra chars for escapees. + *length += escapees * 2; + *escaped = (PRUint8*)nsMemory::Alloc(*length + termination); + if (*escaped == nsnull) + { + *length = 0; + *escaped = nsnull; + return NS_ERROR_OUT_OF_MEMORY; + } + char* n = (char*)*escaped; + b = value; + while (escapees && b < e) + { + char c = *b++; + if (c < ' ' + || c > '~' + || c == '/' + || c == '%') + { + *(n++) = '%'; + *(n++) = sEscapeKeyHex[ 0xF & (c >> 4) ]; + *(n++) = sEscapeKeyHex[ 0xF & c ]; + escapees--; + } + else + { + *(n++) = c; + } + } + e += termination; + if (b < e) + { + strncpy(n, b, e - b); + } + return rv; +} + +/*----------------------------- nsRegistry::UnescapeKey ------------------------------- +| Unscape a binary key so that the registry works OK, since it expects UTF8 +| with no slashes or control characters. This is probably better than raw. +| If no escaping is required, then the method is successful and a null is +| returned, indicating that the caller should use the original string. +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistry::UnescapeKey(PRUint8* escaped, PRUint32 termination, PRUint32* length, PRUint8** key) +{ + nsresult rv = NS_OK; + char* value = (char*)escaped; + char* b = value; + char* e = b + *length; + int escapees = 0; + while (b < e) // Count characters outside legal range or slash + { + if (*b++ == '%') + { + escapees++; + } + } + if (escapees == 0) // If no escapees, then no results + { + *length = 0; + *key = nsnull; + return NS_OK; + } + // New length includes two extra chars for escapees. + *length -= escapees * 2; + *key = (PRUint8*)nsMemory::Alloc(*length + termination); + if (*key == nsnull) + { + *length = 0; + *key = nsnull; + return NS_ERROR_OUT_OF_MEMORY; + } + char* n = (char*)*key; + b = value; + while (escapees && b < e) + { + char c = *(b++); + if (c == '%') + { + if (e - b >= 2) + { + const char* c1 = strchr(sEscapeKeyHex, *(b++)); + const char* c2 = strchr(sEscapeKeyHex, *(b++)); + if (c1 != nsnull + && c2 != nsnull) + { + *(n++) = ((c2 - sEscapeKeyHex) & 0xF) + | (((c1 - sEscapeKeyHex) & 0xF) << 4); + } + else + { + escapees = -1; + } + } + else + { + escapees = -1; + } + escapees--; + } + else + { + *(n++) = c; + } + } + if (escapees < 0) + { + nsMemory::Free(*key); + *length = 0; + *key = nsnull; + return NS_ERROR_INVALID_ARG; + } + e += termination; + if (b < e) + { + strncpy(n, b, e - b); + } + return rv; +} + + +/*-------------- nsRegistry::SetBufferSize------------------------------------- +| Sets the size of the file used for the registry's buffer size. | +------------------------------------------------------------------------------*/ +int nsRegistry::SetBufferSize( int bufsize ) +{ + int newSize; + // set the file buffer size + PR_Lock(mregLock); + newSize = NR_RegSetBufferSize( mReg, bufsize ); + PR_Unlock(mregLock); + return newSize; +} + + +/*-------------- nsRegSubtreeEnumerator::nsRegSubtreeEnumerator ---------------- +| The ctor simply stashes all the information that will be needed to enumerate | +| the subkeys. | +------------------------------------------------------------------------------*/ +nsRegSubtreeEnumerator::nsRegSubtreeEnumerator( HREG hReg, RKEY rKey, PRBool all ) + : mReg( hReg ), mKey( rKey ), mEnum( 0 ), mNext( 0 ), + mStyle( all ? REGENUM_DESCEND : REGENUM_CHILDREN ), mDone( PR_FALSE ) { + + mName[0] = '\0'; + +#ifdef EXTRA_THREADSAFE + // Create a registry lock + mregLock = PR_NewLock(); +#endif + return; +} + +nsRegSubtreeEnumerator::~nsRegSubtreeEnumerator() +{ +#ifdef EXTRA_THREADSAFE + if (mregLock) { + PR_DestroyLock(mregLock); + } +#endif +} + +/*----------------------- nsRegSubtreeEnumerator::First ------------------------ +| Set mEnum to 0; this will cause the next NR_RegEnum call to go to | +| the beginning. We then do a Next() call in order to do a "lookahead" to | +| properly detect an empty list (i.e., set the mDone flag). | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegSubtreeEnumerator::First() { + nsresult rv = NS_OK; + // Reset "done" flag. + mDone = PR_FALSE; + // Clear Name + mName[0] = '\0'; + // Go to beginning. + mEnum = mNext = 0; + // Lookahead so mDone flag gets set for empty list. + rv = Next(); + return rv; +} + +/*----------------------- nsRegSubtreeEnumerator::Next ------------------------- +| First, we check if we've already advanced to the end by checking the mDone | +| flag. | +| | +| We advance mEnum to the next enumeration value which is in the mNext | +| lookahead buffer. We must then call advance to lookahead and properly set | +| the isDone flag. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegSubtreeEnumerator::Next() { + nsresult rv = NS_OK; + // Check for at end. + if ( !mDone ) { + // Advance to next spot. + mEnum = mNext; + // Lookahead so mDone is properly set (and to update mNext). + rv = advance(); + } else { + // Set result accordingly. + rv = regerr2nsresult( REGERR_NOMORE ); + } + return rv; +} + +/*---------------------- nsRegSubtreeEnumerator::advance ----------------------- +| Advance mNext to next subkey using NR_RegEnumSubkeys. We set mDone if | +| there are no more subkeys. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegSubtreeEnumerator::advance() { + REGERR err = REGERR_OK; + PR_Lock(mregLock); + err = NR_RegEnumSubkeys( mReg, mKey, &mNext, mName, sizeof mName, mStyle ); + // See if we ran off end. + if( err == REGERR_NOMORE ) { + // Remember we've run off end. + mDone = PR_TRUE; + } + PR_Unlock(mregLock); + // Convert result. + nsresult rv = regerr2nsresult( err ); + return rv; +} + +/*-------------------- nsRegSubtreeEnumerator::CurrentItem --------------------- +| Allocates and returns a new instance of class nsRegistryNode. The node | +| object will hold the curent mEnum value so it can obtain its name from | +| the registry when asked. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegSubtreeEnumerator::CurrentItem( nsISupports **result) { + nsresult rv = NS_OK; + // Make sure there is a place to put the result. + if( result ) { + *result = new nsRegistryNode( mReg, mName, (RKEY) mNext ); + if( *result ) { + NS_ADDREF(*result); + } else { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*--------------nsRegSubtreeEnumerator::CurrentItemInPlaceUTF8----------------- +| An ugly name for an ugly function. Hands back a shared pointer to the | +| name (encoded as UTF-8), and the subkey identifier. | +-----------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegSubtreeEnumerator::CurrentItemInPlaceUTF8( nsRegistryKey *childKey , + const char **name ) +{ + *childKey = mNext; + /* [shared] */ + *name = mName; + return NS_OK; +} + +/*---------------------- nsRegSubtreeEnumerator::IsDone ------------------------ +| Simply return mDone. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegSubtreeEnumerator::IsDone() { + nsresult rv = mDone ? NS_OK : NS_ENUMERATOR_FALSE; + return rv; +} + + +/*---------------- nsRegValueEnumerator::nsRegValueEnumerator ------------------ +| Delegates everything to the base class constructor. | +------------------------------------------------------------------------------*/ +nsRegValueEnumerator::nsRegValueEnumerator( HREG hReg, RKEY rKey ) + : nsRegSubtreeEnumerator( hReg, rKey, PR_FALSE ) { + return; +} + + +/*--------------------- nsRegValueEnumerator::CurrentItem ---------------------- +| As the nsRegSubtreeEnumerator counterpart, but allocates an object of | +| class nsRegistryValue. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP +nsRegValueEnumerator::CurrentItem( nsISupports **result ) { + nsresult rv = NS_OK; + // Make sure there is a place to put the result. + if( result ) { + *result = new nsRegistryValue( mReg, mKey, mEnum ); + if( *result ) { + NS_ADDREF(*result); + } else { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*----------------------- nsRegValueEnumerator::advance ------------------------ +| Advance mNext to next subkey using NR_RegEnumEntries. We set mDone if | +| there are no more entries. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegValueEnumerator::advance() { + REGERR err = REGERR_OK; + char name[MAXREGNAMELEN]; + PRUint32 len = sizeof name; + REGINFO info = { sizeof info, 0, 0 }; + PR_Lock(mregLock); + err = NR_RegEnumEntries( mReg, mKey, &mNext, name, len, &info ); + // See if we ran off end. + if( err == REGERR_NOMORE ) { + // Remember we've run off end. + mDone = PR_TRUE; + } + PR_Unlock(mregLock); + // Convert result. + nsresult rv = regerr2nsresult( err ); + return rv; +} + + +/*---------------------- nsRegistryNode::nsRegistryNode ------------------------ +| Store the arguments in the corresponding data members and initialize | +| the other data members. We defer the libreg calls till we're asked for | +| our name. We use mErr==-1 to indicate we haven't fetched the name yet. | +------------------------------------------------------------------------------*/ +nsRegistryNode::nsRegistryNode( HREG hReg, char *name, RKEY childKey ) + : mReg( hReg ), mChildKey( childKey ) { + + PR_ASSERT(name != nsnull); + strcpy(mName, name); + +#ifdef EXTRA_THREADSAFE + mregLock = PR_NewLock(); +#endif + + return; +} + +nsRegistryNode::~nsRegistryNode() +{ +#ifdef EXTRA_THREADSAFE + if (mregLock) { + PR_DestroyLock(mregLock); + } +#endif +} + +/*-------------------------- nsRegistryNode::GetName --------------------------- +| If we haven't fetched it yet, get the name of the corresponding subkey now, | +| using NR_RegEnumSubkeys. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryNode::GetName( PRUnichar **result ) { + if (result == nsnull) return NS_ERROR_NULL_POINTER; + // Make sure there is a place to put the result. + *result = nsTextFormatter::smprintf( widestrFormat, mName ); + if ( !*result ) return NS_ERROR_OUT_OF_MEMORY; + return NS_OK; +} + +/*-------------------------- nsRegistryNode::GetNameUTF8 ----------------------- +| If we haven't fetched it yet, get the name of the corresponding subkey now, | +| using NR_RegEnumSubkeys. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryNode::GetNameUTF8( char **result ) { + if (result == nsnull) return NS_ERROR_NULL_POINTER; + // Make sure there is a place to put the result. + *result = nsCRT::strdup( mName ); + if ( !*result ) return NS_ERROR_OUT_OF_MEMORY; + return NS_OK; +} + +/*-------------------------- nsRegistryNode::GetKey ---------------------------- +| Get the subkey corresponding to this node | +| using NR_RegEnumSubkeys. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryNode::GetKey( nsRegistryKey *r_key ) { + nsresult rv = NS_OK; + if (r_key == nsnull) return NS_ERROR_NULL_POINTER; + *r_key = mChildKey; + return rv; +} + + + +/*--------------------- nsRegistryValue::nsRegistryValue ----------------------- +| Implemented the same way as the nsRegistryNode ctor. | +------------------------------------------------------------------------------*/ +nsRegistryValue::nsRegistryValue( HREG hReg, RKEY key, REGENUM slot ) + : mReg( hReg ), mKey( key ), mEnum( slot ), mErr( -1 ) { +#ifdef EXTRA_THREADSAFE + mregLock = PR_NewLock(); +#endif + mInfo.size = sizeof(REGINFO); +} + +nsRegistryValue::~nsRegistryValue() +{ +#ifdef EXTRA_THREADSAFE + if (mregLock) { + PR_DestroyLock(mregLock); + } +#endif +} + +/*------------------------- nsRegistryValue::GetName --------------------------- +| See nsRegistryNode::GetName; we use NR_RegEnumEntries in this case. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryValue::GetName( PRUnichar **result ) { + nsresult rv = NS_OK; + // Make sure we have a place to put the result. + if( result ) { + // Ensure we've got the info we need. + rv = getInfo(); + if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { + // worked, return actual result. + *result = nsTextFormatter::smprintf( widestrFormat, mName ); + if ( *result ) { + rv = NS_OK; + } else { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*------------------------- nsRegistryValue::GetNameUTF8 ----------------------- +| See nsRegistryNode::GetName; we use NR_RegEnumEntries in this case. | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryValue::GetNameUTF8( char **result ) { + nsresult rv = NS_OK; + // Make sure we have a place to put the result. + if( result ) { + // Ensure we've got the info we need. + rv = getInfo(); + if( rv == NS_OK || rv == NS_ERROR_REG_NO_MORE ) { + // worked, return actual result. + *result = nsCRT::strdup( mName ); + if ( *result ) { + rv = NS_OK; + } else { + rv = NS_ERROR_OUT_OF_MEMORY; + } + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*----------------------- nsRegistryValue::GetType ------------------------ +| We test if we've got the info already. If not, we git it by calling | +| getInfo. We calculate the result by converting the REGINFO type field to | +| a nsIRegistry::DataType value (using reginfo2DataType). | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryValue::GetType( PRUint32 *result ) { + nsresult rv = NS_OK; + // Make sure we have room for th result. + if( result ) { + // Make sure we've got the info we need. + rv = getInfo(); + // Check if it worked. + if( rv == NS_OK ) { + // Convert result from REGINFO to nsIRegistry::ValueInfo. + reginfo2DataType( mInfo, *result ); + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*---------------------- nsRegistryValue::GetLength ----------------------- +| We test if we've got the info already. If not, we git it by calling | +| getInfo. We calculate the result by converting the REGINFO type field to | +| a nsIRegistry::DataType value (using reginfo2Length). | +------------------------------------------------------------------------------*/ +NS_IMETHODIMP nsRegistryValue::GetLength( PRUint32 *result ) { + nsresult rv = NS_OK; + // Make sure we have room for th result. + if( result ) { + // Make sure we've got the info we need. + rv = getInfo(); + // Check if it worked. + if( rv == NS_OK ) { + // Convert result from REGINFO to length. + reginfo2Length( mInfo, *result ); + } + } else { + rv = NS_ERROR_NULL_POINTER; + } + return rv; +} + +/*------------------------- nsRegistryValue::getInfo --------------------------- +| Call NR_RegEnumEntries to set the mInfo/mName data members. | +------------------------------------------------------------------------------*/ +nsresult nsRegistryValue::getInfo() { + nsresult rv = NS_OK; + // Test whether we haven't tried to get it yet. + if( mErr == -1 ) { + REGENUM temp = mEnum; + // Get name and info. + PR_Lock(mregLock); + mErr = NR_RegEnumEntries( mReg, mKey, &temp, mName, sizeof mName, &mInfo ); + // Convert result. + rv = regerr2nsresult( mErr ); + PR_Unlock(mregLock); + } + return rv; +} + + +nsRegistryFactory::nsRegistryFactory() { +} + +NS_IMPL_ISUPPORTS1(nsRegistryFactory, nsIFactory) + +NS_IMETHODIMP +nsRegistryFactory::CreateInstance(nsISupports *aOuter, + const nsIID &aIID, + void **aResult) { + nsresult rv = NS_OK; + nsRegistry* newRegistry; + + if(aResult == nsnull) { + return NS_ERROR_NULL_POINTER; + } else { + *aResult = nsnull; + } + + if(0 != aOuter) { + return NS_ERROR_NO_AGGREGATION; + } + + NS_NEWXPCOM(newRegistry, nsRegistry); + + if(newRegistry == nsnull) { + return NS_ERROR_OUT_OF_MEMORY; + } + + NS_ADDREF(newRegistry); + rv = newRegistry->QueryInterface(aIID, aResult); + NS_RELEASE(newRegistry); + + return rv; +} + +nsresult +nsRegistryFactory::LockFactory(PRBool aLock) +{ + // Not implemented in simplest case. + return NS_OK; +} + +// This is a temporary hack; needs work to support dynamic binding +// via nsComponentManager and support for multiple factories per DLL. +extern "C" NS_EXPORT nsresult +NS_RegistryGetFactory(nsIFactory** aFactory ) { + nsresult rv = NS_OK; + + if( aFactory == 0 ) { + return NS_ERROR_NULL_POINTER; + } else { + *aFactory = 0; + } + + nsIFactory* inst = new nsRegistryFactory(); + if(0 == inst) { + rv = NS_ERROR_OUT_OF_MEMORY; + } else { + NS_ADDREF(inst); + *aFactory = inst; + } + + return rv; +} -- cgit v1.2.3