From 16f504a9dca3fe3b70568f67b7d41241ae485288 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:49:04 +0200 Subject: Adding upstream version 7.0.6-dfsg. Signed-off-by: Daniel Baumann --- src/libs/xpcom18a4/xpcom/threads/plevent.h | 690 +++++++++++++++++++++++++++++ 1 file changed, 690 insertions(+) create mode 100644 src/libs/xpcom18a4/xpcom/threads/plevent.h (limited to 'src/libs/xpcom18a4/xpcom/threads/plevent.h') diff --git a/src/libs/xpcom18a4/xpcom/threads/plevent.h b/src/libs/xpcom18a4/xpcom/threads/plevent.h new file mode 100644 index 00000000..5bc9c89f --- /dev/null +++ b/src/libs/xpcom18a4/xpcom/threads/plevent.h @@ -0,0 +1,690 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is mozilla.org Code. + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either of the GNU General Public License Version 2 or later (the "GPL"), + * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/********************************************************************** +NSPL Events + +Defining Events +--------------- + +Events are essentially structures that represent argument lists for a +function that will run on another thread. All event structures you +define must include a PLEvent struct as their first field: + + typedef struct MyEventType { + PLEvent e; + // arguments follow... + int x; + char* y; + } MyEventType; + +It is also essential that you establish a model of ownership for each +argument passed in an event record, i.e. whether particular arguments +will be deleted by the event destruction callback, or whether they +only loaned to the event handler callback, and guaranteed to persist +until the time at which the handler is called. + +Sending Events +-------------- + +Events are initialized by PL_InitEvent and can be sent via +PL_PostEvent or PL_PostSynchronousEvent. Events can also have an +owner. The owner of an event can revoke all the events in a given +event-queue by calling PL_RevokeEvents. An owner might want +to do this if, for instance, it is being destroyed, and handling the +events after the owner's destruction would cause an error (e.g. an +MWContext). + +Since the act of initializing and posting an event must be coordinated +with it's possible revocation, it is essential that the event-queue's +monitor be entered surrounding the code that constructs, initializes +and posts the event: + + void postMyEvent(MyOwner* owner, int x, char* y) + { + MyEventType* event; + + PL_ENTER_EVENT_QUEUE_MONITOR(myQueue); + + // construct + event = PR_NEW(MyEventType); + if (event == NULL) goto done; + + // initialize + PL_InitEvent(event, owner, + (PLHandleEventProc)handleMyEvent, + (PLDestroyEventProc)destroyMyEvent); + event->x = x; + event->y = strdup(y); + + // post + PL_PostEvent(myQueue, &event->e); + + done: + PL_EXIT_EVENT_QUEUE_MONITOR(myQueue); + } + +If you don't call PL_InitEvent and PL_PostEvent within the +event-queue's monitor, you'll get a big red assert. + +Handling Events +--------------- + +To handle an event you must write a callback that is passed the event +record you defined containing the event's arguments: + + void* handleMyEvent(MyEventType* event) + { + doit(event->x, event->y); + return NULL; // you could return a value for a sync event + } + +Similarly for the destruction callback: + + void destroyMyEvent(MyEventType* event) + { + free(event->y); // created by strdup + free(event); + } + +Processing Events in Your Event Loop +------------------------------------ + +If your main loop only processes events delivered to the event queue, +things are rather simple. You just get the next event (which may +block), and then handle it: + + while (1) { + event = PL_GetEvent(myQueue); + PL_HandleEvent(event); + } + +However, if other things must be waited on, you'll need to obtain a +file-descriptor that represents your event queue, and hand it to select: + + fd = PL_GetEventQueueSelectFD(myQueue); + ...add fd to select set... + while (select(...)) { + if (...fd...) { + PL_ProcessPendingEvents(myQueue); + } + ... + } + +Of course, with Motif and Windows it's more complicated than that, and +on Mac it's completely different, but you get the picture. + +Revoking Events +--------------- +If at any time an owner of events is about to be destroyed, you must +take steps to ensure that no one tries to use the event queue after +the owner is gone (or a crash may result). You can do this by either +processing all the events in the queue before destroying the owner: + + { + ... + PL_ENTER_EVENT_QUEUE_MONITOR(myQueue); + PL_ProcessPendingEvents(myQueue); + DestroyMyOwner(owner); + PL_EXIT_EVENT_QUEUE_MONITOR(myQueue); + ... + } + +or by revoking the events that are in the queue for that owner. This +removes them from the queue and calls their destruction callback: + + { + ... + PL_ENTER_EVENT_QUEUE_MONITOR(myQueue); + PL_RevokeEvents(myQueue, owner); + DestroyMyOwner(owner); + PL_EXIT_EVENT_QUEUE_MONITOR(myQueue); + ... + } + +In either case it is essential that you be in the event-queue's monitor +to ensure that all events are removed from the queue for that owner, +and to ensure that no more events will be delivered for that owner. +**********************************************************************/ + +#ifndef plevent_h___ +#define plevent_h___ + +#include "prtypes.h" +#include "prclist.h" +#include "prthread.h" +#include "prlock.h" +#include "prcvar.h" +#include "prmon.h" + +/* For HWND */ +#if defined(XP_WIN32) +#include +#elif defined(XP_OS2) +#define INCL_DOSMISC +#define INCL_DOSPROCESS +#define INCL_DOSERRORS +#include +#endif + +#ifdef VBOX_WITH_XPCOM_NAMESPACE_CLEANUP +#define PL_DestroyEvent VBoxNsplPL_DestroyEvent +#define PL_HandleEvent VBoxNsplPL_HandleEvent +#define PL_InitEvent VBoxNsplPL_InitEvent +#define PL_CreateEventQueue VBoxNsplPL_CreateEventQueue +#define PL_CreateMonitoredEventQueue VBoxNsplPL_CreateMonitoredEventQueue +#define PL_CreateNativeEventQueue VBoxNsplPL_CreateNativeEventQueue +#define PL_DequeueEvent VBoxNsplPL_DequeueEvent +#define PL_DestroyEventQueue VBoxNsplPL_DestroyEventQueue +#define PL_EventAvailable VBoxNsplPL_EventAvailable +#define PL_EventLoop VBoxNsplPL_EventLoop +#define PL_GetEvent VBoxNsplPL_GetEvent +#define PL_GetEventOwner VBoxNsplPL_GetEventOwner +#define PL_GetEventQueueMonitor VBoxNsplPL_GetEventQueueMonitor +#define PL_GetEventQueueSelectFD VBoxNsplPL_GetEventQueueSelectFD +#define PL_MapEvents VBoxNsplPL_MapEvents +#define PL_PostEvent VBoxNsplPL_PostEvent +#define PL_PostSynchronousEvent VBoxNsplPL_PostSynchronousEvent +#define PL_ProcessEventsBeforeID VBoxNsplPL_ProcessEventsBeforeID +#define PL_ProcessPendingEvents VBoxNsplPL_ProcessPendingEvents +#define PL_RegisterEventIDFunc VBoxNsplPL_RegisterEventIDFunc +#define PL_RevokeEvents VBoxNsplPL_RevokeEvents +#define PL_UnregisterEventIDFunc VBoxNsplPL_UnregisterEventIDFunc +#define PL_WaitForEvent VBoxNsplPL_WaitForEvent +#define PL_IsQueueNative VBoxNsplPL_IsQueueNative +#define PL_IsQueueOnCurrentThread VBoxNsplPL_IsQueueOnCurrentThread +#define PL_FavorPerformanceHint VBoxNsplPL_FavorPerformanceHint +#endif /* VBOX_WITH_XPCOM_NAMESPACE_CLEANUP */ + +PR_BEGIN_EXTERN_C + +/* Typedefs */ + +typedef struct PLEvent PLEvent; +typedef struct PLEventQueue PLEventQueue; + +/******************************************************************************* + * Event Queue Operations + ******************************************************************************/ + +/* +** Creates a new event queue. Returns NULL on failure. +*/ +PR_EXTERN(PLEventQueue*) +PL_CreateEventQueue(const char* name, PRThread* handlerThread); + + +/* ----------------------------------------------------------------------- +** FUNCTION: PL_CreateNativeEventQueue() +** +** DESCRIPTION: +** PL_CreateNativeEventQueue() creates an event queue that +** uses platform specific notify mechanisms. +** +** For Unix, the platform specific notify mechanism provides +** an FD that may be extracted using the function +** PL_GetEventQueueSelectFD(). The FD returned may be used in +** a select() function call. +** +** For Windows, the platform specific notify mechanism +** provides an event receiver window that is called by +** Windows to process the event using the windows message +** pump engine. +** +** INPUTS: +** name: A name, as a diagnostic aid. +** +** handlerThread: A pointer to the PRThread structure for +** the thread that will "handle" events posted to this event +** queue. +** +** RETURNS: +** A pointer to a PLEventQueue structure or NULL. +** +*/ +PR_EXTERN(PLEventQueue *) + PL_CreateNativeEventQueue( + const char *name, + PRThread *handlerThread + ); + +/* ----------------------------------------------------------------------- +** FUNCTION: PL_CreateMonitoredEventQueue() +** +** DESCRIPTION: +** PL_CreateMonitoredEventQueue() creates an event queue. No +** platform specific notify mechanism is created with the +** event queue. +** +** Users of this type of event queue must explicitly poll the +** event queue to retreive and process events. +** +** +** INPUTS: +** name: A name, as a diagnostic aid. +** +** handlerThread: A pointer to the PRThread structure for +** the thread that will "handle" events posted to this event +** queue. +** +** RETURNS: +** A pointer to a PLEventQueue structure or NULL. +** +*/ +PR_EXTERN(PLEventQueue *) + PL_CreateMonitoredEventQueue( + const char *name, + PRThread *handlerThread + ); + +/* +** Destroys an event queue. +*/ +PR_EXTERN(void) +PL_DestroyEventQueue(PLEventQueue* self); + +/* +** Returns the monitor associated with an event queue. This monitor is +** selectable. The monitor should be entered to protect against anyone +** calling PL_RevokeEvents while the event is trying to be constructed +** and delivered. +*/ +PR_EXTERN(PRMonitor*) +PL_GetEventQueueMonitor(PLEventQueue* self); + +#define PL_ENTER_EVENT_QUEUE_MONITOR(queue) \ + PR_EnterMonitor(PL_GetEventQueueMonitor(queue)) + +#define PL_EXIT_EVENT_QUEUE_MONITOR(queue) \ + PR_ExitMonitor(PL_GetEventQueueMonitor(queue)) + +/* +** Posts an event to an event queue, waking up any threads waiting for an +** event. If event is NULL, notification still occurs, but no event will +** be available. +** +** Any events delivered by this routine will be destroyed by PL_HandleEvent +** when it is called (by the event-handling thread). +*/ +PR_EXTERN(PRStatus) +PL_PostEvent(PLEventQueue* self, PLEvent* event); + +/* +** Like PL_PostEvent, this routine posts an event to the event handling +** thread, but does so synchronously, waiting for the result. The result +** which is the value of the handler routine is returned. +** +** Any events delivered by this routine will be not be destroyed by +** PL_HandleEvent, but instead will be destroyed just before the result is +** returned (by the current thread). +*/ +PR_EXTERN(void*) +PL_PostSynchronousEvent(PLEventQueue* self, PLEvent* event); + +/* +** Gets an event from an event queue. Returns NULL if no event is +** available. +*/ +PR_EXTERN(PLEvent*) +PL_GetEvent(PLEventQueue* self); + +/* +** Returns true if there is an event available for PL_GetEvent. +*/ +PR_EXTERN(PRBool) +PL_EventAvailable(PLEventQueue* self); + +/* +** This is the type of the function that must be passed to PL_MapEvents +** (see description below). +*/ +typedef void +(PR_CALLBACK *PLEventFunProc)(PLEvent* event, void* data, PLEventQueue* queue); + +/* +** Applies a function to every event in the event queue. This can be used +** to selectively handle, filter, or remove events. The data pointer is +** passed to each invocation of the function fun. +*/ +PR_EXTERN(void) +PL_MapEvents(PLEventQueue* self, PLEventFunProc fun, void* data); + +/* +** This routine walks an event queue and destroys any event whose owner is +** the owner specified. The == operation is used to compare owners. +*/ +PR_EXTERN(void) +PL_RevokeEvents(PLEventQueue* self, void* owner); + +/* +** This routine processes all pending events in the event queue. It can be +** called from the thread's main event-processing loop whenever the event +** queue's selectFD is ready (returned by PL_GetEventQueueSelectFD). +*/ +PR_EXTERN(void) +PL_ProcessPendingEvents(PLEventQueue* self); + +/******************************************************************************* + * Pure Event Queues + * + * For when you're only processing PLEvents and there is no native + * select, thread messages, or AppleEvents. + ******************************************************************************/ + +/* +** Blocks until an event can be returned from the event queue. This routine +** may return NULL if the current thread is interrupted. +*/ +PR_EXTERN(PLEvent*) +PL_WaitForEvent(PLEventQueue* self); + +/* +** One stop shopping if all you're going to do is process PLEvents. Just +** call this and it loops forever processing events as they arrive. It will +** terminate when your thread is interrupted or dies. +*/ +PR_EXTERN(void) +PL_EventLoop(PLEventQueue* self); + +/******************************************************************************* + * Native Event Queues + * + * For when you need to call select, or WaitNextEvent, and yet also want + * to handle PLEvents. + ******************************************************************************/ + +/* +** This routine allows you to grab the file descriptor associated with an +** event queue and use it in the readFD set of select. Useful for platforms +** that support select, and must wait on other things besides just PLEvents. +*/ +PR_EXTERN(PRInt32) +PL_GetEventQueueSelectFD(PLEventQueue* self); + +/* +** This routine will allow you to check to see if the given eventQueue in +** on the current thread. It will return PR_TRUE if so, else it will return +** PR_FALSE +*/ +PR_EXTERN(PRBool) + PL_IsQueueOnCurrentThread( PLEventQueue *queue ); + +/* +** Returns whether the queue is native (true) or monitored (false) +*/ +PR_EXTERN(PRBool) +PL_IsQueueNative(PLEventQueue *queue); + +/******************************************************************************* + * Event Operations + ******************************************************************************/ + +/* +** The type of an event handler function. This function is passed as an +** initialization argument to PL_InitEvent, and called by +** PL_HandleEvent. If the event is called synchronously, a void* result +** may be returned (otherwise any result will be ignored). +*/ +typedef void* +(PR_CALLBACK *PLHandleEventProc)(PLEvent* self); + +/* +** The type of an event destructor function. This function is passed as +** an initialization argument to PL_InitEvent, and called by +** PL_DestroyEvent. +*/ +typedef void +(PR_CALLBACK *PLDestroyEventProc)(PLEvent* self); + +/* +** Initializes an event. Usually events are embedded in a larger event +** structure which holds event-specific data, so this is an initializer +** for that embedded part of the structure. +*/ +PR_EXTERN(void) +PL_InitEvent(PLEvent* self, void* owner, + PLHandleEventProc handler, + PLDestroyEventProc destructor); + +/* +** Returns the owner of an event. +*/ +PR_EXTERN(void*) +PL_GetEventOwner(PLEvent* self); + +/* +** Handles an event, calling the event's handler routine. +*/ +PR_EXTERN(void) +PL_HandleEvent(PLEvent* self); + +/* +** Destroys an event, calling the event's destructor. +*/ +PR_EXTERN(void) +PL_DestroyEvent(PLEvent* self); + +/* +** Removes an event from an event queue. +*/ +PR_EXTERN(void) +PL_DequeueEvent(PLEvent* self, PLEventQueue* queue); + + +/* + * Give hint to native PL_Event notification mechanism. If the native + * platform needs to tradeoff performance vs. native event starvation + * this hint tells the native dispatch code which to favor. + * The default is to prevent event starvation. + * + * Calls to this function may be nested. When the number of calls that + * pass PR_TRUE is subtracted from the number of calls that pass PR_FALSE + * is greater than 0, performance is given precedence over preventing + * event starvation. + * + * The starvationDelay arg is only used when + * favorPerformanceOverEventStarvation is PR_FALSE. It is the + * amount of time in milliseconds to wait before the PR_FALSE actually + * takes effect. + */ +PR_EXTERN(void) +PL_FavorPerformanceHint(PRBool favorPerformanceOverEventStarvation, PRUint32 starvationDelay); + + +/******************************************************************************* + * Private Stuff + ******************************************************************************/ + +struct PLEvent { + PRCList link; + PLHandleEventProc handler; + PLDestroyEventProc destructor; + void* owner; + void* synchronousResult; + PRLock* lock; + PRCondVar* condVar; + PRBool handled; +#ifdef PL_POST_TIMINGS + PRIntervalTime postTime; +#endif +#ifdef XP_UNIX + unsigned long id; +#endif /* XP_UNIX */ + /* other fields follow... */ +}; + +/******************************************************************************/ + +/* +** Returns the event queue associated with the main thread. +** +*/ +#if defined(XP_WIN) || defined(XP_OS2) +/* ----------------------------------------------------------------------- +** FUNCTION: PL_GetNativeEventReceiverWindow() +** +** DESCRIPTION: +** PL_GetNativeEventReceiverWindow() returns the windows +** handle of the event receiver window associated with the +** referenced PLEventQueue argument. +** +** INPUTS: +** PLEventQueue pointer +** +** RETURNS: +** event receiver window handle. +** +** RESTRICTIONS: MS-Windows ONLY. +** +*/ +PR_EXTERN(HWND) + PL_GetNativeEventReceiverWindow( + PLEventQueue *eqp + ); +#endif /* XP_WIN || XP_OS2 */ + +#ifdef XP_UNIX +/* ----------------------------------------------------------------------- +** FUNCTION: PL_ProcessEventsBeforeID() +** +** DESCRIPTION: +** +** PL_ProcessEventsBeforeID() will process events in a native event +** queue that have an id that is older than the ID passed in. +** +** INPUTS: +** PLEventQueue *aSelf +** unsigned long aID +** +** RETURNS: +** PRInt32 number of requests processed, -1 on error. +** +** RESTRICTIONS: Unix only (well, X based unix only) +*/ +PR_EXTERN(PRInt32) +PL_ProcessEventsBeforeID(PLEventQueue *aSelf, unsigned long aID); + +/* This prototype is a function that can be called when an event is + posted to stick an ID on it. */ + +typedef unsigned long +(PR_CALLBACK *PLGetEventIDFunc)(void *aClosure); + + +/* ----------------------------------------------------------------------- +** FUNCTION: PL_RegisterEventIDFunc() +** +** DESCRIPTION: +** +** This function registers a function for getting the ID on unix for +** this event queue. +** +** INPUTS: +** PLEventQueue *aSelf +** PLGetEventIDFunc func +** void *aClosure +** +** RETURNS: +** void +** +** RESTRICTIONS: Unix only (well, X based unix only) */ +PR_EXTERN(void) +PL_RegisterEventIDFunc(PLEventQueue *aSelf, PLGetEventIDFunc aFunc, + void *aClosure); + +/* ----------------------------------------------------------------------- +** FUNCTION: PL_RegisterEventIDFunc() +** +** DESCRIPTION: +** +** This function unregisters a function for getting the ID on unix for +** this event queue. +** +** INPUTS: +** PLEventQueue *aSelf +** +** RETURNS: +** void +** +** RESTRICTIONS: Unix only (well, X based unix only) */ +PR_EXTERN(void) +PL_UnregisterEventIDFunc(PLEventQueue *aSelf); + +#endif /* XP_UNIX */ + + +/* ----------------------------------------------------------------------- */ + +#if defined(NO_NSPR_10_SUPPORT) +#else +/********* ???????????????? FIX ME ??????????????????????????? *****/ +/********************** Some old definitions *****************************/ + +/* Re: prevent.h->plevent.h */ +#define PREvent PLEvent +#define PREventQueue PLEventQueue +#define PR_CreateEventQueue PL_CreateEventQueue +#define PR_DestroyEventQueue PL_DestroyEventQueue +#define PR_GetEventQueueMonitor PL_GetEventQueueMonitor +#define PR_ENTER_EVENT_QUEUE_MONITOR PL_ENTER_EVENT_QUEUE_MONITOR +#define PR_EXIT_EVENT_QUEUE_MONITOR PL_EXIT_EVENT_QUEUE_MONITOR +#define PR_PostEvent PL_PostEvent +#define PR_PostSynchronousEvent PL_PostSynchronousEvent +#define PR_GetEvent PL_GetEvent +#define PR_EventAvailable PL_EventAvailable +#define PREventFunProc PLEventFunProc +#define PR_MapEvents PL_MapEvents +#define PR_RevokeEvents PL_RevokeEvents +#define PR_ProcessPendingEvents PL_ProcessPendingEvents +#define PR_WaitForEvent PL_WaitForEvent +#define PR_EventLoop PL_EventLoop +#define PR_GetEventQueueSelectFD PL_GetEventQueueSelectFD +#define PRHandleEventProc PLHandleEventProc +#define PRDestroyEventProc PLDestroyEventProc +#define PR_InitEvent PL_InitEvent +#define PR_GetEventOwner PL_GetEventOwner +#define PR_HandleEvent PL_HandleEvent +#define PR_DestroyEvent PL_DestroyEvent +#define PR_DequeueEvent PL_DequeueEvent +#define PR_GetMainEventQueue PL_GetMainEventQueue + +/********* ????????????? End Fix me ?????????????????????????????? *****/ +#endif /* NO_NSPR_10_SUPPORT */ + +PR_END_EXTERN_C + +#endif /* plevent_h___ */ -- cgit v1.2.3