/* $Id: Modesetting.cpp $ */ /** @file * VirtualBox Video driver, common code - HGSMI initialisation and helper * functions. */ /* * Copyright (C) 2006-2022 Oracle and/or its affiliates. * * Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include #include #include #ifndef VBOX_GUESTR3XF86MOD # include #endif /** * Gets the count of virtual monitors attached to the guest via an HGSMI * command * * @returns the right count on success or 1 on failure. * @param pCtx the context containing the heap to use */ DECLHIDDEN(uint32_t) VBoxHGSMIGetMonitorCount(PHGSMIGUESTCOMMANDCONTEXT pCtx) { /* Query the configured number of displays. */ uint32_t cDisplays = 0; VBoxQueryConfHGSMI(pCtx, VBOX_VBVA_CONF32_MONITOR_COUNT, &cDisplays); // LogFunc(("cDisplays = %d\n", cDisplays)); if (cDisplays == 0 || cDisplays > VBOX_VIDEO_MAX_SCREENS) /* Host reported some bad value. Continue in the 1 screen mode. */ cDisplays = 1; return cDisplays; } /** * Query whether the virtual hardware supports VBE_DISPI_ID_CFG * and set the interface. * * @returns Whether the interface is supported. */ DECLHIDDEN(bool) VBoxVGACfgAvailable(void) { uint16_t DispiId; VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ID); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, VBE_DISPI_ID_CFG); DispiId = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); return (DispiId == VBE_DISPI_ID_CFG); } /** * Query a configuration value from the virtual hardware which supports VBE_DISPI_ID_CFG. * I.e. use this function only if VBoxVGACfgAvailable returns true. * * @returns Whether the value is supported. * @param u16Id Identifier of the configuration value (VBE_DISPI_CFG_ID_*). * @param pu32Value Where to store value from the host. * @param u32DefValue What to assign to *pu32Value if the value is not supported. */ DECLHIDDEN(bool) VBoxVGACfgQuery(uint16_t u16Id, uint32_t *pu32Value, uint32_t u32DefValue) { uint32_t u32; VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_CFG); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, VBE_DISPI_CFG_MASK_SUPPORT | u16Id); u32 = VBVO_PORT_READ_U32(VBE_DISPI_IOPORT_DATA); if (u32) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, u16Id); *pu32Value = VBVO_PORT_READ_U32(VBE_DISPI_IOPORT_DATA); return true; } *pu32Value = u32DefValue; return false; } /** * Returns the size of the video RAM in bytes. * * @returns the size */ DECLHIDDEN(uint32_t) VBoxVideoGetVRAMSize(void) { /** @note A 32bit read on this port returns the VRAM size if interface is older than VBE_DISPI_ID_CFG. */ return VBVO_PORT_READ_U32(VBE_DISPI_IOPORT_DATA); } /** * Check whether this hardware allows the display width to have non-multiple- * of-eight values. * * @returns true if any width is allowed, false otherwise. */ DECLHIDDEN(bool) VBoxVideoAnyWidthAllowed(void) { unsigned DispiId; VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ID); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, VBE_DISPI_ID_ANYX); DispiId = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); return (DispiId == VBE_DISPI_ID_ANYX); } /** * Tell the host about how VRAM is divided up between each screen via an HGSMI * command. It is acceptable to specifiy identical data for each screen if * they share a single framebuffer. * * @returns iprt status code, either VERR_NO_MEMORY or the status returned by * @a pfnFill * @todo What was I thinking of with that callback function? It * would be much simpler to just pass in a structure in normal * memory and copy it. * @param pCtx the context containing the heap to use * @param u32Count the number of screens we are activating * @param pfnFill a callback which initialises the VBVAINFOVIEW structures * for all screens * @param pvData context data for @a pfnFill */ DECLHIDDEN(int) VBoxHGSMISendViewInfo(PHGSMIGUESTCOMMANDCONTEXT pCtx, uint32_t u32Count, PFNHGSMIFILLVIEWINFO pfnFill, void *pvData) { int rc; /* Issue the screen info command. */ VBVAINFOVIEW RT_UNTRUSTED_VOLATILE_HOST *pInfo = (VBVAINFOVIEW RT_UNTRUSTED_VOLATILE_HOST *)VBoxHGSMIBufferAlloc(pCtx, sizeof(VBVAINFOVIEW) * u32Count, HGSMI_CH_VBVA, VBVA_INFO_VIEW); if (pInfo) { rc = pfnFill(pvData, (VBVAINFOVIEW *)pInfo /* lazy bird */, u32Count); if (RT_SUCCESS(rc)) VBoxHGSMIBufferSubmit(pCtx, pInfo); VBoxHGSMIBufferFree(pCtx, pInfo); } else rc = VERR_NO_MEMORY; return rc; } /** * Set a video mode using port registers. This must be done for the first * screen before every HGSMI modeset and also works when HGSM is not enabled. * @param cWidth the mode width * @param cHeight the mode height * @param cVirtWidth the mode pitch * @param cBPP the colour depth of the mode * @param fFlags flags for the mode. These will be or-ed with the * default _ENABLED flag, so unless you are restoring * a saved mode or have special requirements you can pass * zero here. * @param cx the horizontal panning offset * @param cy the vertical panning offset */ DECLHIDDEN(void) VBoxVideoSetModeRegisters(uint16_t cWidth, uint16_t cHeight, uint16_t cVirtWidth, uint16_t cBPP, uint16_t fFlags, uint16_t cx, uint16_t cy) { /* set the mode characteristics */ VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_XRES); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cWidth); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cHeight); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIRT_WIDTH); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cVirtWidth); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cBPP); /* enable the mode */ VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ENABLE); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, fFlags | VBE_DISPI_ENABLED); /* Panning registers */ VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_X_OFFSET); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cx); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_Y_OFFSET); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, cy); /** @todo read from the port to see if the mode switch was successful */ } /** * Get the video mode for the first screen using the port registers. All * parameters are optional * @returns true if the VBE mode returned is active, false if we are in VGA * mode * @note If anyone else needs additional register values just extend the * function with additional parameters and fix any existing callers. * @param pcWidth where to store the mode width * @param pcHeight where to store the mode height * @param pcVirtWidth where to store the mode pitch * @param pcBPP where to store the colour depth of the mode * @param pfFlags where to store the flags for the mode */ DECLHIDDEN(bool) VBoxVideoGetModeRegisters(uint16_t *pcWidth, uint16_t *pcHeight, uint16_t *pcVirtWidth, uint16_t *pcBPP, uint16_t *pfFlags) { uint16_t fFlags; VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ENABLE); fFlags = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); if (pcWidth) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_XRES); *pcWidth = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); } if (pcHeight) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_YRES); *pcHeight = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); } if (pcVirtWidth) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_VIRT_WIDTH); *pcVirtWidth = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); } if (pcBPP) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_BPP); *pcBPP = VBVO_PORT_READ_U16(VBE_DISPI_IOPORT_DATA); } if (pfFlags) *pfFlags = fFlags; return RT_BOOL(fFlags & VBE_DISPI_ENABLED); } /** * Disable our extended graphics mode and go back to VGA mode. */ DECLHIDDEN(void) VBoxVideoDisableVBE(void) { VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_INDEX, VBE_DISPI_INDEX_ENABLE); VBVO_PORT_WRITE_U16(VBE_DISPI_IOPORT_DATA, 0); } /** * Set a video mode via an HGSMI request. The views must have been * initialised first using @a VBoxHGSMISendViewInfo and if the mode is being * set on the first display then it must be set first using registers. * @param pCtx The context containing the heap to use. * @param cDisplay the screen number * @param cOriginX the horizontal displacement relative to the first screen * @param cOriginY the vertical displacement relative to the first screen * @param offStart the offset of the visible area of the framebuffer * relative to the framebuffer start * @param cbPitch the offset in bytes between the starts of two adjecent * scan lines in video RAM * @param cWidth the mode width * @param cHeight the mode height * @param cBPP the colour depth of the mode * @param fFlags flags */ DECLHIDDEN(void) VBoxHGSMIProcessDisplayInfo(PHGSMIGUESTCOMMANDCONTEXT pCtx, uint32_t cDisplay, int32_t cOriginX, int32_t cOriginY, uint32_t offStart, uint32_t cbPitch, uint32_t cWidth, uint32_t cHeight, uint16_t cBPP, uint16_t fFlags) { /* Issue the screen info command. */ VBVAINFOSCREEN RT_UNTRUSTED_VOLATILE_HOST *pScreen = (VBVAINFOSCREEN RT_UNTRUSTED_VOLATILE_HOST *)VBoxHGSMIBufferAlloc(pCtx, sizeof(VBVAINFOSCREEN), HGSMI_CH_VBVA, VBVA_INFO_SCREEN); if (pScreen != NULL) { pScreen->u32ViewIndex = cDisplay; pScreen->i32OriginX = cOriginX; pScreen->i32OriginY = cOriginY; pScreen->u32StartOffset = offStart; pScreen->u32LineSize = cbPitch; pScreen->u32Width = cWidth; pScreen->u32Height = cHeight; pScreen->u16BitsPerPixel = cBPP; pScreen->u16Flags = fFlags; VBoxHGSMIBufferSubmit(pCtx, pScreen); VBoxHGSMIBufferFree(pCtx, pScreen); } else { // LogFunc(("HGSMIHeapAlloc failed\n")); } } /** Report the rectangle relative to which absolute pointer events should be * expressed. This information remains valid until the next VBVA resize event * for any screen, at which time it is reset to the bounding rectangle of all * virtual screens. * @param pCtx The context containing the heap to use. * @param cOriginX Upper left X co-ordinate relative to the first screen. * @param cOriginY Upper left Y co-ordinate relative to the first screen. * @param cWidth Rectangle width. * @param cHeight Rectangle height. * @returns iprt status code. * @returns VERR_NO_MEMORY HGSMI heap allocation failed. */ DECLHIDDEN(int) VBoxHGSMIUpdateInputMapping(PHGSMIGUESTCOMMANDCONTEXT pCtx, int32_t cOriginX, int32_t cOriginY, uint32_t cWidth, uint32_t cHeight) { int rc; VBVAREPORTINPUTMAPPING *p; // Log(("%s: cOriginX=%d, cOriginY=%d, cWidth=%u, cHeight=%u\n", __PRETTY_FUNCTION__, (int)cOriginX, (int)cOriginX, // (unsigned)cWidth, (unsigned)cHeight)); /* Allocate the IO buffer. */ p = (VBVAREPORTINPUTMAPPING *)VBoxHGSMIBufferAlloc(pCtx, sizeof(VBVAREPORTINPUTMAPPING), HGSMI_CH_VBVA, VBVA_REPORT_INPUT_MAPPING); if (p) { /* Prepare data to be sent to the host. */ p->x = cOriginX; p->y = cOriginY; p->cx = cWidth; p->cy = cHeight; rc = VBoxHGSMIBufferSubmit(pCtx, p); /* Free the IO buffer. */ VBoxHGSMIBufferFree(pCtx, p); } else rc = VERR_NO_MEMORY; // LogFunc(("rc = %d\n", rc)); return rc; } /** * Get most recent video mode hints. * @param pCtx the context containing the heap to use * @param cScreens the number of screens to query hints for, starting at 0. * @param paHints array of VBVAMODEHINT structures for receiving the hints. * @returns iprt status code * @returns VERR_NO_MEMORY HGSMI heap allocation failed. * @returns VERR_NOT_SUPPORTED Host does not support this command. */ DECLHIDDEN(int) VBoxHGSMIGetModeHints(PHGSMIGUESTCOMMANDCONTEXT pCtx, unsigned cScreens, VBVAMODEHINT *paHints) { int rc; VBVAQUERYMODEHINTS RT_UNTRUSTED_VOLATILE_HOST *pQuery; AssertPtrReturn(paHints, VERR_INVALID_POINTER); pQuery = (VBVAQUERYMODEHINTS RT_UNTRUSTED_VOLATILE_HOST *)VBoxHGSMIBufferAlloc(pCtx, sizeof(VBVAQUERYMODEHINTS) + cScreens * sizeof(VBVAMODEHINT), HGSMI_CH_VBVA, VBVA_QUERY_MODE_HINTS); if (pQuery != NULL) { pQuery->cHintsQueried = cScreens; pQuery->cbHintStructureGuest = sizeof(VBVAMODEHINT); pQuery->rc = VERR_NOT_SUPPORTED; VBoxHGSMIBufferSubmit(pCtx, pQuery); rc = pQuery->rc; if (RT_SUCCESS(rc)) memcpy(paHints, (void *)(pQuery + 1), cScreens * sizeof(VBVAMODEHINT)); VBoxHGSMIBufferFree(pCtx, pQuery); } else { // LogFunc(("HGSMIHeapAlloc failed\n")); rc = VERR_NO_MEMORY; } return rc; } /** * Query the supported flags in VBVAINFOSCREEN::u16Flags. * * @returns The mask of VBVA_SCREEN_F_* flags or 0 if host does not support the request. * @param pCtx the context containing the heap to use */ DECLHIDDEN(uint16_t) VBoxHGSMIGetScreenFlags(PHGSMIGUESTCOMMANDCONTEXT pCtx) { uint32_t u32Flags = 0; int rc = VBoxQueryConfHGSMI(pCtx, VBOX_VBVA_CONF32_SCREEN_FLAGS, &u32Flags); // LogFunc(("u32Flags = 0x%x rc %Rrc\n", u32Flags, rc)); if (RT_FAILURE(rc) || u32Flags > UINT16_MAX) u32Flags = 0; return (uint16_t)u32Flags; }