Merging upstream version 1.7.

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

10 files changed, 208 insertions, 205 deletions

diff --git a/ChangeLog b/ChangeLog
index b907530..af69db0 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,11 +1,6 @@
-2015-05-23  Antonio Diaz Diaz  <antonio@gnu.org>
+2015-07-07  Antonio Diaz Diaz  <antonio@gnu.org>
 
-	* Version 1.7-rc1 released.
-	* main.c (compress): Fixed spurious warning about uninitialized var.
-
-2015-02-26  Antonio Diaz Diaz  <antonio@gnu.org>
-
-	* Version 1.7-pre1 released.
+	* Version 1.7 released.
 	* Ported fast encoder and option '-0' from lzip.
 	* Makefile.in: Added new targets 'install*-compress'.
 
diff --git a/README b/README
index b358f08..e6464da 100644
--- a/README
+++ b/README
@@ -45,6 +45,13 @@ each file without exceeding the given limit. Keep in mind that the
 decompression memory requirement is affected at compression time by the
 choice of dictionary size limit.
 
+The amount of memory required for compression is about 1 or 2 times the
+dictionary size limit (1 if input file size is less than dictionary size
+limit, else 2) plus 9 times the dictionary size really used. The option
+'-0' is special and only requires about 1.5 MiB at most. The amount of
+memory required for decompression is about 46 kB larger than the
+dictionary size really used.
+
 When compressing, clzip replaces every file given in the command line
 with a compressed version of itself, with the name "original_name.lz".
 When decompressing, clzip attempts to guess the name for the decompressed
@@ -93,7 +100,7 @@ used by lzip could be developed, and the resulting sequence could also
 be coded using the LZMA coding scheme.
 
 Clzip currently implements two variants of the LZMA algorithm; fast
-(used by option -0) and normal (used by all other compression levels).
+(used by option '-0') and normal (used by all other compression levels).
 
 The high compression of LZMA comes from combining two basic, well-proven
 compression ideas: sliding dictionaries (LZ77/78) and markov models (the
diff --git a/configure b/configure
index de1bcb0..d848018 100755
--- a/configure
+++ b/configure
@@ -6,7 +6,7 @@
 # to copy, distribute and modify it.
 
 pkgname=clzip
-pkgversion=1.7-rc1
+pkgversion=1.7
 progname=clzip
 srctrigger=doc/${pkgname}.texi
 
diff --git a/decoder.c b/decoder.c
index cd3e774..dc12b72 100644
--- a/decoder.c
+++ b/decoder.c
@@ -38,11 +38,10 @@ void Pp_show_msg( struct Pretty_print * const pp, const char * const msg )
     {
     if( pp->first_post )
       {
-      int i, len;
+      int i, len = pp->longest_name - strlen( pp->name );
       pp->first_post = false;
       fprintf( stderr, "  %s: ", pp->name );
-      len = pp->longest_name - strlen( pp->name );
-      for( i = 0; i < len; ++i ) fprintf( stderr, " " );
+      for( i = 0; i < len; ++i ) fputc( ' ', stderr );
       if( !msg ) fflush( stderr );
       }
     if( msg ) fprintf( stderr, "%s\n", msg );
@@ -153,7 +152,7 @@ static bool LZd_verify_trailer( struct LZ_decoder * const d,
     if( verbosity >= 0 )
       {
       Pp_show_msg( pp, 0 );
-      fprintf( stderr, "CRC mismatch; trailer says %08X, data CRC is %08X.\n",
+      fprintf( stderr, "CRC mismatch; trailer says %08X, data CRC is %08X\n",
                trailer_crc, LZd_crc( d ) );
       }
     }
@@ -164,7 +163,7 @@ static bool LZd_verify_trailer( struct LZ_decoder * const d,
     if( verbosity >= 0 )
       {
       Pp_show_msg( pp, 0 );
-      fprintf( stderr, "Data size mismatch; trailer says %llu, data size is %llu (0x%llX).\n",
+      fprintf( stderr, "Data size mismatch; trailer says %llu, data size is %llu (0x%llX)\n",
                trailer_data_size, LZd_data_position( d ), LZd_data_position( d ) );
       }
     }
@@ -175,7 +174,7 @@ static bool LZd_verify_trailer( struct LZ_decoder * const d,
     if( verbosity >= 0 )
       {
       Pp_show_msg( pp, 0 );
-      fprintf( stderr, "Member size mismatch; trailer says %llu, member size is %llu (0x%llX).\n",
+      fprintf( stderr, "Member size mismatch; trailer says %llu, member size is %llu (0x%llX)\n",
                trailer_member_size, member_size, member_size );
       }
     }
@@ -224,7 +223,7 @@ int LZd_decode_member( struct LZ_decoder * const d,
                          LZd_peek( d, rep0 ) ) );
         }
       }
-    else
+    else					/* match or repeated match */
       {
       int len;
       if( Rd_decode_bit( rdec, &d->bm_rep[state] ) != 0 )	/* 2nd bit */
@@ -254,7 +253,7 @@ int LZd_decode_member( struct LZ_decoder * const d,
         state = St_set_rep( state );
         len = min_match_len + Rd_decode_len( rdec, &d->rep_len_model, pos_state );
         }
-      else
+      else					/* match */
         {
         int dis_slot;
         const unsigned rep0_saved = rep0;
@@ -288,7 +287,7 @@ int LZd_decode_member( struct LZ_decoder * const d,
               if( verbosity >= 0 )
                 {
                 Pp_show_msg( pp, 0 );
-                fprintf( stderr, "Unsupported marker code '%d'.\n", len );
+                fprintf( stderr, "Unsupported marker code '%d'\n", len );
                 }
               return 4;
               }
diff --git a/doc/clzip.1 b/doc/clzip.1
index cfc9050..32b3bde 100644
--- a/doc/clzip.1
+++ b/doc/clzip.1
@@ -1,5 +1,5 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.1.
-.TH CLZIP "1" "May 2015" "clzip 1.7-rc1" "User Commands"
+.TH CLZIP "1" "July 2015" "clzip 1.7" "User Commands"
 .SH NAME
 clzip \- reduces the size of files
 .SH SYNOPSIS
@@ -28,7 +28,7 @@ decompress
 overwrite existing output files
 .TP
 \fB\-F\fR, \fB\-\-recompress\fR
-force recompression of compressed files
+force re\-compression of compressed files
 .TP
 \fB\-k\fR, \fB\-\-keep\fR
 keep (don't delete) input files
diff --git a/doc/clzip.info b/doc/clzip.info
index b66195e..786d8c1 100644
--- a/doc/clzip.info
+++ b/doc/clzip.info
@@ -11,14 +11,14 @@ File: clzip.info,  Node: Top,  Next: Introduction,  Up: (dir)
 Clzip Manual
 ************
 
-This manual is for Clzip (version 1.7-rc1, 23 May 2015).
+This manual is for Clzip (version 1.7, 7 July 2015).
 
 * Menu:
 
 * Introduction::           Purpose and features of clzip
-* Algorithm::              How clzip compresses the data
 * Invoking clzip::         Command line interface
 * File format::            Detailed format of the compressed file
+* Algorithm::              How clzip compresses the data
 * Examples::               A small tutorial with examples
 * Problems::               Reporting bugs
 * Concept index::          Index of concepts
@@ -30,7 +30,7 @@ This manual is for Clzip (version 1.7-rc1, 23 May 2015).
 copy, distribute and modify it.
 
 
-File: clzip.info,  Node: Introduction,  Next: Algorithm,  Prev: Top,  Up: Top
+File: clzip.info,  Node: Introduction,  Next: Invoking clzip,  Prev: Top,  Up: Top
 
 1 Introduction
 **************
@@ -53,7 +53,8 @@ availability:
      recovery means. The lziprecover program can repair bit-flip errors
      (one of the most common forms of data corruption) in lzip files,
      and provides data recovery capabilities, including error-checked
-     merging of damaged copies of a file.
+     merging of damaged copies of a file.  *note Data safety:
+     (lziprecover)Data safety.
 
    * The lzip format is as simple as possible (but not simpler). The
      lzip manual provides the code of a simple decompressor along with
@@ -87,6 +88,11 @@ bzip2, which makes it safer than compressors returning ambiguous warning
 values (like gzip) when it is used as a back end for other programs like
 tar or zutils.
 
+   Clzip will automatically use the smallest possible dictionary size
+for each file without exceeding the given limit. Keep in mind that the
+decompression memory requirement is affected at compression time by the
+choice of dictionary size limit.
+
    The amount of memory required for compression is about 1 or 2 times
 the dictionary size limit (1 if input file size is less than dictionary
 size limit, else 2) plus 9 times the dictionary size really used. The
@@ -94,11 +100,6 @@ option '-0' is special and only requires about 1.5 MiB at most. The
 amount of memory required for decompression is about 46 kB larger than
 the dictionary size really used.
 
-   Clzip will automatically use the smallest possible dictionary size
-for each file without exceeding the given limit. Keep in mind that the
-decompression memory requirement is affected at compression time by the
-choice of dictionary size limit.
-
    When compressing, clzip replaces every file given in the command line
 with a compressed version of itself, with the name "original_name.lz".
 When decompressing, clzip attempts to guess the name for the
@@ -138,75 +139,9 @@ automatically creating multi-member output. The members so created are
 large, about 2 PiB each.
 
 
-File: clzip.info,  Node: Algorithm,  Next: Invoking clzip,  Prev: Introduction,  Up: Top
-
-2 Algorithm
-***********
-
-In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a
-concrete algorithm; it is more like "any algorithm using the LZMA coding
-scheme". For example, the option '-0' of lzip uses the scheme in almost
-the simplest way possible; issuing the longest match it can find, or a
-literal byte if it can't find a match. Inversely, a much more elaborated
-way of finding coding sequences of minimum size than the one currently
-used by lzip could be developed, and the resulting sequence could also
-be coded using the LZMA coding scheme.
-
-   Clzip currently implements two variants of the LZMA algorithm; fast
-(used by option -0) and normal (used by all other compression levels).
-
-   The high compression of LZMA comes from combining two basic,
-well-proven compression ideas: sliding dictionaries (LZ77/78) and
-markov models (the thing used by every compression algorithm that uses
-a range encoder or similar order-0 entropy coder as its last stage)
-with segregation of contexts according to what the bits are used for.
-
-   Clzip is a two stage compressor. The first stage is a Lempel-Ziv
-coder, which reduces redundancy by translating chunks of data to their
-corresponding distance-length pairs. The second stage is a range encoder
-that uses a different probability model for each type of data;
-distances, lengths, literal bytes, etc.
-
-   Here is how it works, step by step:
-
-   1) The member header is written to the output stream.
-
-   2) The first byte is coded literally, because there are no previous
-bytes to which the match finder can refer to.
-
-   3) The main encoder advances to the next byte in the input data and
-calls the match finder.
-
-   4) The match finder fills an array with the minimum distances before
-the current byte where a match of a given length can be found.
-
-   5) Go back to step 3 until a sequence (formed of pairs, repeated
-distances and literal bytes) of minimum price has been formed. Where the
-price represents the number of output bits produced.
-
-   6) The range encoder encodes the sequence produced by the main
-encoder and sends the produced bytes to the output stream.
-
-   7) Go back to step 3 until the input data are finished or until the
-member or volume size limits are reached.
-
-   8) The range encoder is flushed.
-
-   9) The member trailer is written to the output stream.
-
-   10) If there are more data to compress, go back to step 1.
-
-
-The ideas embodied in clzip are due to (at least) the following people:
-Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
-the definition of Markov chains), G.N.N. Martin (for the definition of
-range encoding), Igor Pavlov (for putting all the above together in
-LZMA), and Julian Seward (for bzip2's CLI).
-
-
-File: clzip.info,  Node: Invoking clzip,  Next: File format,  Prev: Algorithm,  Up: Top
+File: clzip.info,  Node: Invoking clzip,  Next: File format,  Prev: Introduction,  Up: Top
 
-3 Invoking clzip
+2 Invoking clzip
 ****************
 
 The format for running clzip is:
@@ -246,7 +181,7 @@ The format for running clzip is:
 
 '-F'
 '--recompress'
-     Force recompression of files whose name already has the '.lz' or
+     Force re-compression of files whose name already has the '.lz' or
      '.tlz' suffix.
 
 '-k'
@@ -363,9 +298,9 @@ invalid input file, 3 for an internal consistency error (eg, bug) which
 caused clzip to panic.
 
 
-File: clzip.info,  Node: File format,  Next: Examples,  Prev: Invoking clzip,  Up: Top
+File: clzip.info,  Node: File format,  Next: Algorithm,  Prev: Invoking clzip,  Up: Top
 
-4 File format
+3 File format
 *************
 
 Perfection is reached, not when there is no longer anything to add, but
@@ -434,7 +369,73 @@ additional information before, between, or after them.
 
 
 
-File: clzip.info,  Node: Examples,  Next: Problems,  Prev: File format,  Up: Top
+File: clzip.info,  Node: Algorithm,  Next: Examples,  Prev: File format,  Up: Top
+
+4 Algorithm
+***********
+
+In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a
+concrete algorithm; it is more like "any algorithm using the LZMA coding
+scheme". For example, the option '-0' of lzip uses the scheme in almost
+the simplest way possible; issuing the longest match it can find, or a
+literal byte if it can't find a match. Inversely, a much more elaborated
+way of finding coding sequences of minimum size than the one currently
+used by lzip could be developed, and the resulting sequence could also
+be coded using the LZMA coding scheme.
+
+   Clzip currently implements two variants of the LZMA algorithm; fast
+(used by option '-0') and normal (used by all other compression levels).
+
+   The high compression of LZMA comes from combining two basic,
+well-proven compression ideas: sliding dictionaries (LZ77/78) and
+markov models (the thing used by every compression algorithm that uses
+a range encoder or similar order-0 entropy coder as its last stage)
+with segregation of contexts according to what the bits are used for.
+
+   Clzip is a two stage compressor. The first stage is a Lempel-Ziv
+coder, which reduces redundancy by translating chunks of data to their
+corresponding distance-length pairs. The second stage is a range encoder
+that uses a different probability model for each type of data;
+distances, lengths, literal bytes, etc.
+
+   Here is how it works, step by step:
+
+   1) The member header is written to the output stream.
+
+   2) The first byte is coded literally, because there are no previous
+bytes to which the match finder can refer to.
+
+   3) The main encoder advances to the next byte in the input data and
+calls the match finder.
+
+   4) The match finder fills an array with the minimum distances before
+the current byte where a match of a given length can be found.
+
+   5) Go back to step 3 until a sequence (formed of pairs, repeated
+distances and literal bytes) of minimum price has been formed. Where the
+price represents the number of output bits produced.
+
+   6) The range encoder encodes the sequence produced by the main
+encoder and sends the produced bytes to the output stream.
+
+   7) Go back to step 3 until the input data are finished or until the
+member or volume size limits are reached.
+
+   8) The range encoder is flushed.
+
+   9) The member trailer is written to the output stream.
+
+   10) If there are more data to compress, go back to step 1.
+
+
+The ideas embodied in clzip are due to (at least) the following people:
+Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
+the definition of Markov chains), G.N.N. Martin (for the definition of
+range encoding), Igor Pavlov (for putting all the above together in
+LZMA), and Julian Seward (for bzip2's CLI).
+
+
+File: clzip.info,  Node: Examples,  Next: Problems,  Prev: Algorithm,  Up: Top
 
 5 A small tutorial with examples
 ********************************
@@ -545,13 +546,13 @@ Concept index
 
 Tag Table:
 Node: Top210
-Node: Introduction897
-Node: Algorithm6100
-Node: Invoking clzip8930
-Node: File format14479
-Node: Examples16881
-Node: Problems18850
-Node: Concept index19376
+Node: Introduction893
+Node: Invoking clzip6152
+Node: File format11705
+Node: Algorithm14108
+Node: Examples16933
+Node: Problems18900
+Node: Concept index19426
 
 End Tag Table
 
diff --git a/doc/clzip.texi b/doc/clzip.texi
index a74ec6f..e2ca889 100644
--- a/doc/clzip.texi
+++ b/doc/clzip.texi
@@ -6,8 +6,8 @@
 @finalout
 @c %**end of header
 
-@set UPDATED 23 May 2015
-@set VERSION 1.7-rc1
+@set UPDATED 7 July 2015
+@set VERSION 1.7
 
 @dircategory Data Compression
 @direntry
@@ -36,9 +36,9 @@ This manual is for Clzip (version @value{VERSION}, @value{UPDATED}).
 
 @menu
 * Introduction::           Purpose and features of clzip
-* Algorithm::              How clzip compresses the data
 * Invoking clzip::         Command line interface
 * File format::            Detailed format of the compressed file
+* Algorithm::              How clzip compresses the data
 * Examples::               A small tutorial with examples
 * Problems::               Reporting bugs
 * Concept index::          Index of concepts
@@ -72,10 +72,14 @@ availability:
 @itemize @bullet
 @item
 The lzip format provides very safe integrity checking and some data
-recovery means. The lziprecover program can repair bit-flip errors (one
-of the most common forms of data corruption) in lzip files, and provides
-data recovery capabilities, including error-checked merging of damaged
-copies of a file.
+recovery means. The
+@uref{http://www.nongnu.org/lzip/manual/lziprecover_manual.html#Data-safety,,lziprecover}
+program can repair bit-flip errors (one of the most common forms of data
+corruption) in lzip files, and provides data recovery capabilities,
+including error-checked merging of damaged copies of a file.
+@ifnothtml
+@ref{Data safety,,,lziprecover}.
+@end ifnothtml
 
 @item
 The lzip format is as simple as possible (but not simpler). The lzip
@@ -111,6 +115,11 @@ bzip2, which makes it safer than compressors returning ambiguous warning
 values (like gzip) when it is used as a back end for other programs like
 tar or zutils.
 
+Clzip will automatically use the smallest possible dictionary size for
+each file without exceeding the given limit. Keep in mind that the
+decompression memory requirement is affected at compression time by the
+choice of dictionary size limit.
+
 The amount of memory required for compression is about 1 or 2 times the
 dictionary size limit (1 if input file size is less than dictionary size
 limit, else 2) plus 9 times the dictionary size really used. The option
@@ -118,11 +127,6 @@ limit, else 2) plus 9 times the dictionary size really used. The option
 of memory required for decompression is about 46 kB larger than the
 dictionary size really used.
 
-Clzip will automatically use the smallest possible dictionary size for
-each file without exceeding the given limit. Keep in mind that the
-decompression memory requirement is affected at compression time by the
-choice of dictionary size limit.
-
 When compressing, clzip replaces every file given in the command line
 with a compressed version of itself, with the name "original_name.lz".
 When decompressing, clzip attempts to guess the name for the decompressed
@@ -164,72 +168,6 @@ automatically creating multi-member output. The members so created are
 large, about 2 PiB each.
 
 
-@node Algorithm
-@chapter Algorithm
-@cindex algorithm
-
-In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a
-concrete algorithm; it is more like "any algorithm using the LZMA coding
-scheme". For example, the option '-0' of lzip uses the scheme in almost
-the simplest way possible; issuing the longest match it can find, or a
-literal byte if it can't find a match. Inversely, a much more elaborated
-way of finding coding sequences of minimum size than the one currently
-used by lzip could be developed, and the resulting sequence could also
-be coded using the LZMA coding scheme.
-
-Clzip currently implements two variants of the LZMA algorithm; fast
-(used by option -0) and normal (used by all other compression levels).
-
-The high compression of LZMA comes from combining two basic, well-proven
-compression ideas: sliding dictionaries (LZ77/78) and markov models (the
-thing used by every compression algorithm that uses a range encoder or
-similar order-0 entropy coder as its last stage) with segregation of
-contexts according to what the bits are used for.
-
-Clzip is a two stage compressor. The first stage is a Lempel-Ziv coder,
-which reduces redundancy by translating chunks of data to their
-corresponding distance-length pairs. The second stage is a range encoder
-that uses a different probability model for each type of data;
-distances, lengths, literal bytes, etc.
-
-Here is how it works, step by step:
-
-1) The member header is written to the output stream.
-
-2) The first byte is coded literally, because there are no previous
-bytes to which the match finder can refer to.
-
-3) The main encoder advances to the next byte in the input data and
-calls the match finder.
-
-4) The match finder fills an array with the minimum distances before the
-current byte where a match of a given length can be found.
-
-5) Go back to step 3 until a sequence (formed of pairs, repeated
-distances and literal bytes) of minimum price has been formed. Where the
-price represents the number of output bits produced.
-
-6) The range encoder encodes the sequence produced by the main encoder
-and sends the produced bytes to the output stream.
-
-7) Go back to step 3 until the input data are finished or until the
-member or volume size limits are reached.
-
-8) The range encoder is flushed.
-
-9) The member trailer is written to the output stream.
-
-10) If there are more data to compress, go back to step 1.
-
-@sp 1
-@noindent
-The ideas embodied in clzip are due to (at least) the following people:
-Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
-the definition of Markov chains), G.N.N. Martin (for the definition of
-range encoding), Igor Pavlov (for putting all the above together in
-LZMA), and Julian Seward (for bzip2's CLI).
-
-
 @node Invoking clzip
 @chapter Invoking clzip
 @cindex invoking
@@ -276,7 +214,7 @@ Force overwrite of output files.
 
 @item -F
 @itemx --recompress
-Force recompression of files whose name already has the @samp{.lz} or
+Force re-compression of files whose name already has the @samp{.lz} or
 @samp{.tlz} suffix.
 
 @item -k
@@ -476,6 +414,72 @@ facilitates safe recovery of undamaged members from multi-member files.
 @end table
 
 
+@node Algorithm
+@chapter Algorithm
+@cindex algorithm
+
+In spite of its name (Lempel-Ziv-Markov chain-Algorithm), LZMA is not a
+concrete algorithm; it is more like "any algorithm using the LZMA coding
+scheme". For example, the option @samp{-0} of lzip uses the scheme in almost
+the simplest way possible; issuing the longest match it can find, or a
+literal byte if it can't find a match. Inversely, a much more elaborated
+way of finding coding sequences of minimum size than the one currently
+used by lzip could be developed, and the resulting sequence could also
+be coded using the LZMA coding scheme.
+
+Clzip currently implements two variants of the LZMA algorithm; fast
+(used by option @samp{-0}) and normal (used by all other compression levels).
+
+The high compression of LZMA comes from combining two basic, well-proven
+compression ideas: sliding dictionaries (LZ77/78) and markov models (the
+thing used by every compression algorithm that uses a range encoder or
+similar order-0 entropy coder as its last stage) with segregation of
+contexts according to what the bits are used for.
+
+Clzip is a two stage compressor. The first stage is a Lempel-Ziv coder,
+which reduces redundancy by translating chunks of data to their
+corresponding distance-length pairs. The second stage is a range encoder
+that uses a different probability model for each type of data;
+distances, lengths, literal bytes, etc.
+
+Here is how it works, step by step:
+
+1) The member header is written to the output stream.
+
+2) The first byte is coded literally, because there are no previous
+bytes to which the match finder can refer to.
+
+3) The main encoder advances to the next byte in the input data and
+calls the match finder.
+
+4) The match finder fills an array with the minimum distances before the
+current byte where a match of a given length can be found.
+
+5) Go back to step 3 until a sequence (formed of pairs, repeated
+distances and literal bytes) of minimum price has been formed. Where the
+price represents the number of output bits produced.
+
+6) The range encoder encodes the sequence produced by the main encoder
+and sends the produced bytes to the output stream.
+
+7) Go back to step 3 until the input data are finished or until the
+member or volume size limits are reached.
+
+8) The range encoder is flushed.
+
+9) The member trailer is written to the output stream.
+
+10) If there are more data to compress, go back to step 1.
+
+@sp 1
+@noindent
+The ideas embodied in clzip are due to (at least) the following people:
+Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
+the definition of Markov chains), G.N.N. Martin (for the definition of
+range encoding), Igor Pavlov (for putting all the above together in
+LZMA), and Julian Seward (for bzip2's CLI).
+
+
 @node Examples
 @chapter A small tutorial with examples
 @cindex examples
diff --git a/encoder_base.c b/encoder_base.c
index d422ea1..9ce4563 100644
--- a/encoder_base.c
+++ b/encoder_base.c
@@ -75,7 +75,8 @@ bool Mb_init( struct Matchfinder_base * const mb,
               const int num_prev_positions23,
               const int pos_array_factor, const int ifd )
   {
-  const int buffer_size_limit = ( dict_factor * dict_size ) + before + after_size;
+  const int buffer_size_limit =
+    ( dict_factor * dict_size ) + before + after_size;
   unsigned size;
   int i;
 
diff --git a/main.c b/main.c
index 183b9bd..a080ae8 100644
--- a/main.c
+++ b/main.c
@@ -105,7 +105,7 @@ static void show_help( void )
           "  -c, --stdout                   send output to standard output\n"
           "  -d, --decompress               decompress\n"
           "  -f, --force                    overwrite existing output files\n"
-          "  -F, --recompress               force recompression of compressed files\n"
+          "  -F, --recompress               force re-compression of compressed files\n"
           "  -k, --keep                     keep (don't delete) input files\n"
           "  -m, --match-length=<bytes>     set match length limit in bytes [36]\n"
           "  -o, --output=<file>            if reading stdin, place the output into <file>\n"
@@ -180,7 +180,7 @@ static unsigned long long getnum( const char * const ptr,
 
   if( !errno && tail[0] )
     {
-    int factor = ( tail[1] == 'i' ) ? 1024 : 1000;
+    const int factor = ( tail[1] == 'i' ) ? 1024 : 1000;
     int exponent = 0, i;
     bool bad_multiplier = false;
     switch( tail[0] )
@@ -264,7 +264,7 @@ static int open_instream( const char * const name, struct stat * const in_statsp
     if( infd < 0 )
       {
       if( verbosity >= 0 )
-        fprintf( stderr, "%s: Can't open input file '%s': %s.\n",
+        fprintf( stderr, "%s: Can't open input file '%s': %s\n",
                  program_name, name, strerror( errno ) );
       }
     else
@@ -281,7 +281,7 @@ static int open_instream( const char * const name, struct stat * const in_statsp
           fprintf( stderr, "%s: Input file '%s' is not a regular file%s.\n",
                    program_name, name,
                    ( can_read && !no_ofile ) ?
-                   " and '--stdout' was not specified" : "" );
+                   ",\n       and '--stdout' was not specified" : "" );
         close( infd );
         infd = -1;
         }
@@ -335,7 +335,7 @@ static void set_d_outname( const char * const name, const int i )
   strcpy( output_filename, name );
   strcat( output_filename, ".out" );
   if( verbosity >= 1 )
-    fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'.\n",
+    fprintf( stderr, "%s: Can't guess original name for '%s' -- using '%s'\n",
              program_name, name, output_filename );
   }
 
@@ -352,7 +352,7 @@ static bool open_outstream( const bool force )
       fprintf( stderr, "%s: Output file '%s' already exists, skipping.\n",
                program_name, output_filename );
     else
-      fprintf( stderr, "%s: Can't create output file '%s': %s.\n",
+      fprintf( stderr, "%s: Can't create output file '%s': %s\n",
                program_name, output_filename, strerror( errno ) );
     }
   return ( outfd >= 0 );
@@ -519,7 +519,7 @@ static int compress( const unsigned long long member_size,
   if( retval == 0 && verbosity >= 1 )
     {
     if( in_size == 0 || out_size == 0 )
-      fprintf( stderr, " no data compressed.\n" );
+      fputs( " no data compressed.\n", stderr );
     else
       fprintf( stderr, "%6.3f:1, %6.3f bits/byte, "
                        "%5.2f%% saved, %llu in, %llu out.\n",
@@ -598,20 +598,17 @@ static int decompress( const int infd, struct Pretty_print * const pp,
       if( verbosity >= 0 && result <= 2 )
         {
         Pp_show_msg( pp, 0 );
-        if( result == 2 )
-          fprintf( stderr, "File ends unexpectedly at pos %llu.\n",
-                   partial_file_pos );
-        else
-          fprintf( stderr, "Decoder error at pos %llu.\n", partial_file_pos );
+        fprintf( stderr, "%s at pos %llu\n", ( result == 2 ) ?
+                 "File ends unexpectedly" : "Decoder error", partial_file_pos );
         }
       retval = 2; break;
       }
     if( verbosity >= 2 )
-      { fprintf( stderr, testing ? "ok\n" : "done\n" ); Pp_reset( pp ); }
+      { fputs( testing ? "ok\n" : "done\n", stderr ); Pp_reset( pp ); }
     }
   Rd_free( &rdec );
   if( verbosity == 1 && retval == 0 )
-    fprintf( stderr, testing ? "ok\n" : "done\n" );
+    fputs( testing ? "ok\n" : "done\n", stderr );
   return retval;
   }
 
@@ -639,8 +636,8 @@ void show_error( const char * const msg, const int errcode, const bool help )
     if( msg && msg[0] )
       {
       fprintf( stderr, "%s: %s", program_name, msg );
-      if( errcode > 0 ) fprintf( stderr, ": %s.", strerror( errcode ) );
-      fprintf( stderr, "\n" );
+      if( errcode > 0 ) fprintf( stderr, ": %s", strerror( errcode ) );
+      fputc( '\n', stderr );
       }
     if( help )
       fprintf( stderr, "Try '%s --help' for more information.\n",
diff --git a/testsuite/check.sh b/testsuite/check.sh
index fdfb5b8..f64a090 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -79,7 +79,6 @@ printf .
 cat in in > in2 || framework_failure
 "${LZIP}" -o copy2 < in2 || fail=1
 "${LZIP}" -t copy2.lz || fail=1
-printf .
 "${LZIP}" -cd copy2.lz > copy2 || fail=1
 cmp in2 copy2 || fail=1
 printf .