\input texinfo @c -*-texinfo-*-
@c %**start of header
@setfilename clzip.info
@settitle Clzip Manual
@finalout
@c %**end of header

@set UPDATED 21 February 2010
@set VERSION 1.0-rc2

@dircategory Data Compression
@direntry
* Clzip: (clzip).               Data compressor based on the LZMA algorithm
@end direntry


@titlepage
@title Clzip
@subtitle A data compressor based on the LZMA algorithm
@subtitle for Clzip version @value{VERSION}, @value{UPDATED}
@author by Antonio Diaz Diaz

@page
@vskip 0pt plus 1filll
@end titlepage

@contents

@node Top
@top

This manual is for Clzip (version @value{VERSION}, @value{UPDATED}).

@menu
* Introduction::	Purpose and features of clzip
* Algorithm::		How clzip compresses the data
* Invoking Clzip::	Command line interface
* File Format::		Detailed format of the compressed file
* Examples::		A small tutorial with examples
* Problems::		Reporting bugs
* Concept Index::	Index of concepts
@end menu

@sp 1
Copyright @copyright{} 2010 Antonio Diaz Diaz.

This manual is free documentation: you have unlimited permission
to copy, distribute and modify it.


@node Introduction
@chapter Introduction
@cindex introduction

Clzip is a lossless data compressor based on the LZMA algorithm, with
very safe integrity checking and a user interface similar to the one of
gzip or bzip2. Clzip decompresses almost as fast as gzip and compresses
better than bzip2, which makes it well suited for software distribution
and data archiving.

Clzip replaces every file given in the command line with a compressed
version of itself, with the name "original_name.lz". Each compressed
file has the same modification date, permissions, and, when possible,
ownership as the corresponding original, so that these properties can be
correctly restored at decompression time. Clzip is able to read from some
types of non regular files if the @samp{--stdout} option is specified.

If no file names are specified, clzip compresses (or decompresses) from
standard input to standard output. In this case, clzip will decline to
write compressed output to a terminal, as this would be entirely
incomprehensible and therefore pointless.

Clzip will correctly decompress a file which is the concatenation of two
or more compressed files. The result is the concatenation of the
corresponding uncompressed files. Integrity testing of concatenated
compressed files is also supported.

Clzip can produce multimember files and safely recover, with lziprecover,
the undamaged members in case of file damage. Clzip can also split the
compressed output in volumes of a given size, even when reading from
standard input. This allows the direct creation of multivolume
compressed tar archives.

The amount of memory required for compression is about 5 MiB plus 1 or 2
times the dictionary size limit (1 if input file size is less than
dictionary size limit, else 2) plus 8 times the dictionary size really
used. For decompression is a little more than the dictionary size really
used. Clzip will automatically use the smallest possible dictionary size
without exceeding the given limit. It is important to appreciate that
the decompression memory requirement is affected at compression time by
the choice of dictionary size limit.

When decompressing, clzip attempts to guess the name for the decompressed
file from that of the compressed file as follows:

@multitable {anyothername} {becomes} {anyothername.out}
@item filename.lz  @tab becomes @tab filename
@item filename.tlz @tab becomes @tab filename.tar
@item anyothername @tab becomes @tab anyothername.out
@end multitable

As a self-check for your protection, clzip stores in the member trailer
the 32-bit CRC of the original data and the size of the original data,
to make sure that the decompressed version of the data is identical to
the original. This guards against corruption of the compressed data, and
against undetected bugs in clzip (hopefully very unlikely). The chances
of data corruption going undetected are microscopic, less than one
chance in 4000 million for each member processed. Be aware, though, that
the check occurs upon decompression, so it can only tell you that
something is wrong. It can't help you recover the original uncompressed
data.

Return values: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
invalid input file, 3 for an internal consistency error (eg, bug) which
caused clzip to panic.


@node Algorithm
@chapter Algorithm
@cindex algorithm

Clzip implements a simplified version of the LZMA (Lempel-Ziv-Markov
chain-Algorithm) algorithm. The original LZMA algorithm was designed by
Igor Pavlov.

The high compression of LZMA comes from combining two basic, well-proven
compression ideas: sliding dictionaries (LZ77/78) and markov models (the
thing used by every compression algorithm that uses a range encoder or
similar order-0 entropy coder as its last stage) with segregation of
contexts according to what the bits are used for.

Clzip is a two stage compressor. The first stage is a Lempel-Ziv coder,
which reduces redundancy by translating chunks of data to their
corresponding distance-length pairs. The second stage is a range encoder
that uses a different probability model for each type of data;
distances, lengths, literal bytes, etc.

The match finder, part of the LZ coder, is the most important piece of
the LZMA algorithm, as it is in many Lempel-Ziv based algorithms. Most
of clzip's execution time is spent in the match finder, and it has the
greatest influence on the compression ratio.

Here is how it works, step by step:

1) The member header is written to the output stream.

2) The first byte is coded literally, because there are no previous
bytes to which the match finder can refer to.

3) The main encoder advances to the next byte in the input data and
calls the match finder.

4) The match finder fills an array with the minimum distances before the
current byte where a match of a given length can be found.

5) Go back to step 3 until a sequence (formed of pairs, repeated
distances and literal bytes) of minimum price has been formed. Where the
price represents the number of output bits produced.

6) The range encoder encodes the sequence produced by the main encoder
and sends the produced bytes to the output stream.

7) Go back to step 3 until the input data is finished or until the
member or volume size limits are reached.

8) The range encoder is flushed.

9) The member trailer is written to the output stream.

10) If there are more data to compress, go back to step 1.


@node Invoking Clzip
@chapter Invoking Clzip
@cindex invoking
@cindex options
@cindex usage
@cindex version

The format for running clzip is:

@example
clzip [@var{options}] [@var{files}]
@end example

Clzip supports the following options:

@table @samp
@item --help
@itemx -h
Print an informative help message describing the options and exit.

@item --version
@itemx -V
Print the version number of clzip on the standard output and exit.

@item --member-size=@var{size}
@itemx -b @var{size}
Produce a multimember file and set the member size limit to @var{size}
bytes. Minimum member size limit is 100kB. Small member size may degrade
compression ratio, so use it only when needed. The default is to produce
single member files.

@item --stdout
@itemx -c
Compress or decompress to standard output. Needed when reading from a
named pipe (fifo) or from a device. Use it to recover as much of the
uncompressed data as possible when decompressing a corrupt file.

@item --decompress
@itemx -d
Decompress.

@item --force
@itemx -f
Force overwrite of output file.

@item --keep
@itemx -k
Keep (don't delete) input files during compression or decompression.

@item --match-length=@var{length}
@itemx -m @var{length}
Set the match length limit in bytes. Valid values range from 5 to 273.
Larger values usually give better compression ratios but longer
compression times.

@item --output=@var{file}
@itemx -o @var{file}
When reading from standard input and @samp{--stdout} has not been
specified, use @samp{@var{file}} as the virtual name of the uncompressed
file. This produces a file named @samp{@var{file}} when decompressing, a
file named @samp{@var{file}.lz} when compressing, and several files
named @samp{@var{file}00001.lz}, @samp{@var{file}00002.lz}, etc, when
compressing and splitting the output in volumes.

@item --quiet
@itemx -q
Quiet operation. Suppress all messages.

@item --dictionary-size=@var{size}
@itemx -s @var{size}
Set the dictionary size limit in bytes. Valid values range from 4KiB to
512MiB. Clzip will use the smallest possible dictionary size for each
member without exceeding this limit. Note that dictionary sizes are
quantized. If the specified size does not match one of the valid sizes,
it will be rounded upwards.

@item --volume-size=@var{size}
@itemx -S @var{size}
Split the compressed output into several volume files with names
@samp{original_name00001.lz}, @samp{original_name00002.lz}, etc, and set
the volume size limit to @var{size} bytes. Each volume is a complete,
maybe multimember, lzip file. Minimum volume size limit is 100kB. Small
volume size may degrade compression ratio, so use it only when needed.

@item --test
@itemx -t
Check integrity of the specified file(s), but don't decompress them.
This really performs a trial decompression and throws away the result.
Use @samp{-tvv} or @samp{-tvvv} to see information about the file.

@item --verbose
@itemx -v
Verbose mode. Show the compression ratio for each file processed.
Further -v's increase the verbosity level.

@item -1 .. -9
Set the compression parameters (dictionary size and match length limit)
as shown in the table below. Note that @samp{-9} can be much slower than
@samp{-1}. These options have no effect when decompressing.

@multitable {Level} {Dictionary size} {Match length limit}
@item Level @tab Dictionary size @tab Match length limit
@item -1 @tab  1 MiB @tab  10 bytes
@item -2 @tab  1.5 MiB @tab  12 bytes
@item -3 @tab  2 MiB @tab  17 bytes
@item -4 @tab  3 MiB @tab  26 bytes
@item -5 @tab  4 MiB @tab  44 bytes
@item -6 @tab  8 MiB @tab  80 bytes
@item -7 @tab 16 MiB @tab 108 bytes
@item -8 @tab 24 MiB @tab 163 bytes
@item -9 @tab 32 MiB @tab 273 bytes
@end multitable

@item --fast
@itemx --best
Aliases for GNU gzip compatibility.

@end table

@sp 1
Numbers given as arguments to options may be followed by a multiplier
and an optional @samp{B} for "byte".

Table of SI and binary prefixes (unit multipliers):

@multitable {Prefix} {kilobyte  (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)}
@item Prefix @tab Value               @tab | @tab Prefix @tab Value
@item k @tab kilobyte  (10^3 = 1000)  @tab | @tab Ki @tab kibibyte (2^10 = 1024)
@item M @tab megabyte  (10^6)         @tab | @tab Mi @tab mebibyte (2^20)
@item G @tab gigabyte  (10^9)         @tab | @tab Gi @tab gibibyte (2^30)
@item T @tab terabyte  (10^12)        @tab | @tab Ti @tab tebibyte (2^40)
@item P @tab petabyte  (10^15)        @tab | @tab Pi @tab pebibyte (2^50)
@item E @tab exabyte   (10^18)        @tab | @tab Ei @tab exbibyte (2^60)
@item Z @tab zettabyte (10^21)        @tab | @tab Zi @tab zebibyte (2^70)
@item Y @tab yottabyte (10^24)        @tab | @tab Yi @tab yobibyte (2^80)
@end multitable


@node File Format
@chapter File Format
@cindex file format

In the diagram below, a box like this:
@verbatim
+---+
|   | <-- the vertical bars might be missing
+---+
@end verbatim

represents one byte; a box like this:
@verbatim
+==============+
|              |
+==============+
@end verbatim

represents a variable number of bytes.

@sp 1
A lzip file consists of a series of "members" (compressed data sets).
The members simply appear one after another in the file, with no
additional information before, between, or after them.

Each member has the following structure:
@verbatim
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | Lzma stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@end verbatim

All multibyte values are stored in little endian order.

@table @samp
@item ID string
A four byte string, identifying the member type, with the value "LZIP".

@item VN (version number, 1 byte)
Just in case something needs to be modified in the future. Valid values
are 0 and 1. Version 0 files have only one member and lack @samp{Member
size}.

@item DS (coded dictionary size, 1 byte)
Bits 4-0 contain the base 2 logarithm of the base dictionary size.@*
Bits 7-5 contain the number of "wedges" to substract from the base
dictionary size to obtain the dictionary size. The size of a wedge is
(base dictionary size / 16).@*
Valid values for dictionary size range from 4KiB to 512MiB.

@item Lzma stream
The lzma stream, finished by an end of stream marker. Uses default values
for encoder properties.

@item CRC32 (4 bytes)
CRC of the uncompressed original data.

@item Data size (8 bytes)
Size of the uncompressed original data.

@item Member size (8 bytes)
Total size of the member, including header and trailer. This facilitates
safe recovery of undamaged members from multimember files.

@end table


@node Examples
@chapter A small tutorial with examples
@cindex examples

WARNING! If your data is important, give the @samp{--keep} option to
clzip and do not remove the original file until you verify the compressed
file with a command like @samp{clzip -cd file.lz | cmp file -}.

@sp 1
@noindent
Example 1: Replace a regular file with its compressed version file.lz
and show the compression ratio.

@example
clzip -v file
@end example

@sp 1
@noindent
Example 2: Like example 1 but the created file.lz is multimember with a
member size of 1MiB.

@example
clzip -b 1MiB file
@end example

@sp 1
@noindent
Example 3: Compress a whole floppy in /dev/fd0 and send the output to
file.lz.

@example
clzip -c /dev/fd0 > file.lz
@end example

@sp 1
@noindent
Example 4: Create a multivolume compressed tar archive with a volume
size of 1440KiB.

@example
tar -c some_directory | clzip -S 1440KiB -o volume_name
@end example

@sp 1
@noindent
Example 5: Extract a multivolume compressed tar archive.

@example
clzip -cd volume_name*.lz | tar -xf -
@end example

@sp 1
@noindent
Example 6: Create a multivolume compressed backup of a big database file
with a volume size of 650MB, where each volume is a multimember file
with a member size of 32MiB.

@example
clzip -b 32MiB -S 650MB big_database
@end example


@node Problems
@chapter Reporting Bugs
@cindex bugs
@cindex getting help

There are probably bugs in clzip. There are certainly errors and
omissions in this manual. If you report them, they will get fixed. If
you don't, no one will ever know about them and they will remain unfixed
for all eternity, if not longer.

If you find a bug in clzip, please send electronic mail to
@email{lzip-bug@@nongnu.org}. Include the version number, which you can
find by running @w{@samp{clzip --version}}.


@node Concept Index
@unnumbered Concept Index

@printindex cp

@bye