Adding upstream version 1.3.1+dfsg.upstream/1.3.1+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

78 files changed, 3965 insertions, 0 deletions

diff --git a/docs/labs/README.md b/docs/labs/README.md
new file mode 100644
index 0000000..132ee64
--- /dev/null
+++ b/docs/labs/README.md
@@ -0,0 +1,67 @@
+# cvprac labs
+
+The following lab examples will walk through the most commonly used REST API calls using cvprac
+to help users interact with Arista CloudVision easily and automate the provisioning of network devices.
+
+## Table of Contents
+
+1. [Authentication](#authentication)
+    - [Password Authentication](#password-authentication)
+    - [Service Account Token Authentication](#service-account-token-authentication)
+1. [Known Limitations](#known-limitations)
+
+## Authentication
+
+There are two ways to authenticate using the REST APIs:
+
+- user/password (on-prem only)
+- service account token (available on CVP 2020.3.0+ and CVaaS)
+
+### Password Authentication
+
+```python
+from cvprac.cvp_client import CvpClient
+clnt = CvpClient()
+clnt.connect(['10.83.13.33'],'cvpadmin', 'arastra')
+```
+
+### Service Account Token Authentication
+
+To access the CloudVision as-a-Service and send API requests, "Service Account Token" is needed.
+After obtaining the service account token, it can be used for authentication when sending API requests.
+
+Service accounts can be created from the Settings page where a service token can be generated as seen below:
+
+![serviceaccount1](./static/serviceaccount1.png)
+![serviceaccount2](./static/serviceaccount2.png)
+![serviceaccount3](./static/serviceaccount3.png)
+
+The token should be copied and saved to a file that can later be referred to.
+
+```python
+from cvprac.cvp_client import CvpClient
+clnt = CvpClient()
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+clnt.connect(nodes=['www.arista.io'], username='', password='', is_cvaas=True, api_token=token)
+```
+
+>NOTE In case of CVaaS the `is_cvaas` parameters has to be set to `True`
+
+Service accounts are supported on CVP on-prem starting from `2020.3.0`. More details in the [TOI](https://eos.arista.com/toi/cvp-2020-3-0/service-accounts/) and the [CV config guide](https://www.arista.com/en/cg-cv/cv-service-accounts).
+
+```python
+from cvprac.cvp_client import CvpClient
+
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['10.83.13.33'], username='',password='',api_token=token)
+```
+
+## Known Limitations
+
+- for any APIs that interact with EOS devices, the service account name must match the name of the username
+  configured on EOS and CVP
+- Support for REST API bindings for the Resource APIs (Lab 8) was added in CVP 2021.1.0
diff --git a/docs/labs/lab01-cvp-info/get_cvp_info.py b/docs/labs/lab01-cvp-info/get_cvp_info.py
new file mode 100644
index 0000000..0e002d0
--- /dev/null
+++ b/docs/labs/lab01-cvp-info/get_cvp_info.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+result = clnt.api.get_cvp_info()
+print(result)
diff --git a/docs/labs/lab02-inventory-operations/compliance_check.py b/docs/labs/lab02-inventory-operations/compliance_check.py
new file mode 100644
index 0000000..306b407
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/compliance_check.py
@@ -0,0 +1,57 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+### Compliance Code description
+compliance = {"0000":"Configuration is in sync",
+              "0001": "Config is out of sync",
+              "0002": "Image is out of sync",
+              "0003": "Config & image out of sync",
+              "0004": "Config, Image and Device time are in sync",
+              "0005": "Device is not reachable",
+              "0006": "The current EOS version on this device is not supported by CVP. Upgrade the device to manage.",
+              "0007": "Extensions are out of sync",
+              "0008": "Config, Image and Extensions are out of sync",
+              "0009": "Config and Extensions are out of sync",
+              "0010": "Image and Extensions are out of sync",
+              "0011": "Unauthorized User",
+              "0012": "Config, Image, Extension and Device time are out of sync",
+              "0013": "Config, Image and Device time are out of sync",
+              "0014": "Config, Extensions and Device time are out of sync",
+              "0015": "Image, Extensions and Device time are out of sync",
+              "0016": "Config and Device time are out of sync",
+              "0017": "Image and Device time are out of sync",
+              "0018": "Extensions and Device time are out of sync",
+              "0019": "Device time is out of sync"
+}
+
+# Create connection to CloudVision using Service account token
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='',password='',api_token=token)
+
+def check_devices_under_container(client, container):
+    ''' container is the container ID '''
+
+    nodeId = container['key']
+    nodeName = container['name']
+    api = '/ztp/getAllNetElementList.do?'
+    queryParams = "nodeId={}&queryParam=&nodeName={}&startIndex=0&endIndex=0&contextQueryParam=&ignoreAdd=false&useCache=true".format(nodeId, nodeName)
+    return client.get(api + queryParams)
+
+
+container = clnt.api.get_container_by_name('TP_LEAFS')
+
+devices = (check_devices_under_container(clnt,container))
+
+for device in devices['netElementList']:
+    code = device['complianceCode']
+    print(device['fqdn'], ' ', code,' ', compliance[code])
diff --git a/docs/labs/lab02-inventory-operations/get_running_configs.py b/docs/labs/lab02-inventory-operations/get_running_configs.py
new file mode 100644
index 0000000..5478f2e
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/get_running_configs.py
@@ -0,0 +1,31 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+# Get the full inventory
+inventory = clnt.api.get_inventory()
+
+# Create a list of MAC addresses
+device_macs = []
+for i in inventory:
+    device_macs.append(i['systemMacAddress'])
+
+# Create a dictionary with MAC to running-config mapping
+running_configs = {}
+for i in device_macs:
+    running_configs[i] = clnt.api.get_device_configuration(i)
+
+# Write the running-configs of each device using the hostname as the filename
+for i in inventory:
+    with open(i['fqdn']+'.cfg', 'w') as f:
+        f.write(running_configs[i['systemMacAddress']])
\ No newline at end of file
diff --git a/docs/labs/lab02-inventory-operations/get_running_configs_by_time.py b/docs/labs/lab02-inventory-operations/get_running_configs_by_time.py
new file mode 100644
index 0000000..7bbc294
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/get_running_configs_by_time.py
@@ -0,0 +1,34 @@
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+ts = "2021-11-19T15:04:05.0Z" # rfc3339 time
+uri = "/api/v3/services/compliancecheck.Compliance/GetConfig"
+
+# Fetch the inventory
+inventory = clnt.api.get_inventory()
+
+# Iterate through all devices and get the running-config at the specified time for each device
+for device in inventory:
+    sn = device['serialNumber']
+    data = {"request":{
+        "device_id": sn,
+        "timestamp": ts,
+        "type":"RUNNING_CONFIG"
+        }
+    }
+    try:
+        resultRunningConfig = clnt.post(uri, data=data)
+        for idx in resultRunningConfig:
+            if 'config' in idx:
+                result = idx['config']
+                break
+        with open(device['hostname']+'.cfg','w') as f:
+            f.write(result)
+    except Exception as e:
+        print("Not able to get configuration for device {} - exception {}".format(device['fqdn'], e))
diff --git a/docs/labs/lab02-inventory-operations/remove_all_devices_legacy.py b/docs/labs/lab02-inventory-operations/remove_all_devices_legacy.py
new file mode 100644
index 0000000..f8ca8cb
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/remove_all_devices_legacy.py
@@ -0,0 +1,30 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+inventory = clnt.api.get_inventory()
+
+devices = []
+for netelement in inventory:
+   devices.append(netelement['systemMacAddress'])
+
+# Remove devices from provisioning
+# This is a legacy API call that removes the devices from Network Provisioning 
+# in CVP versions older than 2021.3.0, however it does not remove them from 
+# the Device Inventory as that requires the streaming agent (TerminAttr) to be shutdown,
+# which this API does not support.
+# To fully decommission a device the device_decommissioning() API can be used, which is
+# supported from 2021.3.0+.
+# Note that using the delete_devices() function post CVP 2021.3.0 the device will be 
+# automatically added back to the Undefined container.
+clnt.api.delete_devices(devices)
diff --git a/docs/labs/lab02-inventory-operations/remove_and_decommission_device.py b/docs/labs/lab02-inventory-operations/remove_and_decommission_device.py
new file mode 100644
index 0000000..16e783a
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/remove_and_decommission_device.py
@@ -0,0 +1,32 @@
+# Copyright (c) 2022 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+import uuid
+import time
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username", password="password")
+
+device_id = input("Serial number of the device to be decommissioned: ")
+request_id = str(uuid.uuid4())
+clnt.api.device_decommissioning(device_id, request_id)
+
+# This API call will fully decommission the device, ie remove it from both
+# Network Provisioning and Device Inventory (telemetry). It send an eAPI request
+# to EOS to shutdown the TerminAttr daemon, waits for streaming to stop and then removes
+# the device from provisioning and finally decommissions it. This operation can take a few minutes.
+# Supported from CVP 2021.3.0+ and CVaaS.
+decomm_status = "DECOMMISSIONING_STATUS_SUCCESS"
+decomm_result = ""
+while decomm_result != decomm_status:
+    decomm_result = clnt.api.device_decommissioning_status_get_one(request_id)['value']['status']
+    time.sleep(10)
+
+print(decomm_result)
diff --git a/docs/labs/lab02-inventory-operations/remove_devices_from_container_legacy.py b/docs/labs/lab02-inventory-operations/remove_devices_from_container_legacy.py
new file mode 100644
index 0000000..93e0e19
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/remove_devices_from_container_legacy.py
@@ -0,0 +1,32 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+# Get devices in a specific container
+inventory = clnt.api.get_devices_in_container("Undefined")
+
+# Create device list
+devices = []
+for netelement in inventory:
+   devices.append(netelement['systemMacAddress'])
+
+# Remove devices from provisioning
+# This is a legacy API call that removes the devices from Network Provisioning 
+# in CVP versions older than 2021.3.0, however it does not remove them from 
+# the Device Inventory as that requires the streaming agent (TerminAttr) to be shutdown,
+# which this API does not support.
+# To fully decommission a device the device_decommissioning() API can be used, which is
+# supported from 2021.3.0+.
+# Note that using the delete_devices() function post CVP 2021.3.0 the device will be 
+# automatically added back to the Undefined container.
+clnt.api.delete_devices(devices)
diff --git a/docs/labs/lab02-inventory-operations/remove_devices_legacy.py b/docs/labs/lab02-inventory-operations/remove_devices_legacy.py
new file mode 100644
index 0000000..1f274f0
--- /dev/null
+++ b/docs/labs/lab02-inventory-operations/remove_devices_legacy.py
@@ -0,0 +1,30 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using Service account token
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='', password='', api_token=token)
+
+devices = ["50:08:00:a7:ca:c3","50:08:00:b1:5b:0b","50:08:00:60:c6:76",
+           "50:08:00:25:9d:36","50:08:00:8b:ee:b1","50:08:00:8c:22:49"]
+
+# Remove devices from provisioning
+# This is a legacy API call that removes the devices from Network Provisioning 
+# in CVP versions older than 2021.3.0, however it does not remove them from 
+# the Device Inventory as that requires the streaming agent (TerminAttr) to be shutdown,
+# which this API does not support.
+# To fully decommission a device the device_decommissioning() API can be used, which is
+# supported from 2021.3.0+.
+# Note that using the delete_devices() function post CVP 2021.3.0 the device will be 
+# automatically added back to the Undefined container.
+clnt.api.delete_devices(devices)
diff --git a/docs/labs/lab03-configlet-management/assign_configlet_to_device.py b/docs/labs/lab03-configlet-management/assign_configlet_to_device.py
new file mode 100644
index 0000000..2973408
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/assign_configlet_to_device.py
@@ -0,0 +1,23 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+configletName = 'cvprac_example2'
+
+device_name = "tp-avd-leaf1"
+device = clnt.api.get_device_by_name(device_name)
+
+configlet = clnt.api.get_configlet_by_name(configletName)
+
+clnt.api.apply_configlets_to_device("", device, [configlet])
diff --git a/docs/labs/lab03-configlet-management/backup_configlets.py b/docs/labs/lab03-configlet-management/backup_configlets.py
new file mode 100644
index 0000000..6543a6b
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/backup_configlets.py
@@ -0,0 +1,20 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# Get configlets and save them to individual files
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+configlets = clnt.api.get_configlets(start=0,end=0)
+
+for configlet in configlets['data']:
+    with open(configlet['name'],'w') as f:
+        f.write(configlet['config'])
diff --git a/docs/labs/lab03-configlet-management/backup_configletsV2.py b/docs/labs/lab03-configlet-management/backup_configletsV2.py
new file mode 100644
index 0000000..0247f19
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/backup_configletsV2.py
@@ -0,0 +1,48 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# Get configlets and save them to individual files using multi threading
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from concurrent.futures import ThreadPoolExecutor
+from functools import wraps
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+total = clnt.api.get_configlets(start=0,end=1)['total']
+
+def get_list_of_configlets():
+    """
+    Create a thread pool and download specified urls
+    """
+
+    futures_list = []
+    results = []
+
+    with ThreadPoolExecutor(max_workers=40) as executor:
+        for i in range(0,total+1,10):
+            futures = executor.submit(clnt.api.get_configlets, start=i,end=i+10)
+            futures_list.append(futures)
+
+        for future in futures_list:
+            try:
+                result = future.result(timeout=60)
+                results.append(result)
+            except Exception:
+                results.append(None)
+                print(future.result())
+    return results
+
+if __name__ == "__main__":
+
+    results = get_list_of_configlets()
+    for future in results:
+        for configlet in future['data']:
+            with open(configlet['name'],'w') as f:
+                f.write(configlet['config'])
diff --git a/docs/labs/lab03-configlet-management/common.cfg b/docs/labs/lab03-configlet-management/common.cfg
new file mode 100644
index 0000000..7620ae1
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/common.cfg
@@ -0,0 +1,6 @@
+!
+ip name-server vrf management 1.1.1.1
+ip name-server vrf management 8.8.8.8
+!
+ntp server vrf management time.google.com
+!
diff --git a/docs/labs/lab03-configlet-management/config_search.py b/docs/labs/lab03-configlet-management/config_search.py
new file mode 100644
index 0000000..4c3ad27
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/config_search.py
@@ -0,0 +1,54 @@
+# Copyright (c) 2022 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+def main():
+
+   print('Retrieving configlets ...')
+
+   inventory = clnt.api.get_inventory()
+   data = clnt.api.get_configlets_and_mappers()['data']
+   print(data)
+
+   print('Number of configlets:', len(data['configlets']))
+
+   searchAgain = True
+   while searchAgain:
+        try:
+            search = input( "\nEnter Config Line: " )
+            print(f"\n\n\'{search}\' has been found in following configlets:\n\n")
+            print(f"{'Hostname':<30}{'Serial number':<50}{'MAC address':<30}{'Configlets':<40}")
+            print("=" * 150)
+            for i in inventory:
+                device = i['hostname']
+                device_sn = i['serialNumber']
+                device_mac = i['systemMacAddress']
+                configlet_list = []
+                for c in data['configlets']:
+                    for g in data['generatedConfigletMappers']:
+                        if device_mac == g['netElementId'] and c['key'] == g['configletBuilderId'] and search in c['config']:
+                            configlet_list.append(c['name'])
+                    for k in data['configletMappers']:
+                        if device_mac == k['objectId'] and c['key'] == k['configletId'] and search in c['config']:
+                            configlet_list.append(c['name'])
+                configlet_list_final = ",".join(configlet_list)
+                if len(configlet_list) > 0:                
+                    print(f"{device:<30}{device_sn:<50}{device_mac:<30}{configlet_list_final:<30}")
+
+        except KeyboardInterrupt:
+            print('\nExiting... \n')
+            return
+
+if __name__ == '__main__':
+   main()
+
diff --git a/docs/labs/lab03-configlet-management/configlet_list.txt b/docs/labs/lab03-configlet-management/configlet_list.txt
new file mode 100644
index 0000000..645252c
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/configlet_list.txt
@@ -0,0 +1,6 @@
+tp-avd_tp-avd-leaf1
+tp-avd_tp-avd-leaf2
+tp-avd_tp-avd-leaf3
+tp-avd_tp-avd-leaf4
+tp-avd_tp-avd-spine1
+tp-avd_tp-avd-spine2
\ No newline at end of file
diff --git a/docs/labs/lab03-configlet-management/create_configlet.py b/docs/labs/lab03-configlet-management/create_configlet.py
new file mode 100644
index 0000000..8579fbf
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/create_configlet.py
@@ -0,0 +1,24 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+configletName = "cvprac_example"
+
+configlet = """!
+interface Ethernet10
+   description test
+   ip address 10.144.144.1/24
+!
+"""
+
+clnt.api.add_configlet(configletName,configlet)
diff --git a/docs/labs/lab03-configlet-management/create_configlet_from_file.py b/docs/labs/lab03-configlet-management/create_configlet_from_file.py
new file mode 100644
index 0000000..d6d07c6
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/create_configlet_from_file.py
@@ -0,0 +1,19 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+configletName = "cvprac_example2"
+
+with open("common.cfg") as file:
+   configlet = file.read()
+clnt.api.add_configlet(configletName, configlet)
diff --git a/docs/labs/lab03-configlet-management/get_applied_netelements.py b/docs/labs/lab03-configlet-management/get_applied_netelements.py
new file mode 100644
index 0000000..71e020e
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/get_applied_netelements.py
@@ -0,0 +1,36 @@
+# Copyright (c) 2023 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+import argparse
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username", password="password")
+
+parser = argparse.ArgumentParser(
+    description='Get the list of devices and containers a configlet is attached to')
+parser.add_argument('-c', '--configlet', required=True, help='The name of the configlet')
+args = parser.parse_args()
+
+configlet_name = args.configlet
+devices = clnt.api.get_applied_devices(configlet_name)
+
+containers = clnt.api.get_applied_containers(configlet_name)
+print(f"Total number of devices {configlet_name} is attached to: {devices['total']}\n")
+print(f"Total number of containers {configlet_name} is attached to: {containers['total']}\n")
+col1 = "Device FQDN/hostname"
+col2 = "IP Address"
+print(f"{col1:<40}{col2:<40}")
+print("="*80)
+for device in devices['data']:
+    print(f"{device['hostName']:<40}{device['ipAddress']}")
+
+print("\nList of containers:\n")
+for container in containers['data']:
+    print(container['containerName'])
diff --git a/docs/labs/lab03-configlet-management/get_configlets.py b/docs/labs/lab03-configlet-management/get_configlets.py
new file mode 100644
index 0000000..fc3dc2d
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/get_configlets.py
@@ -0,0 +1,53 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# Get list of configlets in parallel
+
+from cvprac.cvp_client import CvpClient
+import ssl
+from concurrent.futures import ThreadPoolExecutor
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+import time
+from functools import wraps
+
+def get_list_of_configlets(configlets):
+    """
+    Create a thread pool and download specified urls
+    """
+
+    futures_list = []
+    results = []
+
+    with ThreadPoolExecutor(max_workers=40) as executor:
+        for configlet in configlets:
+            futures = executor.submit(clnt.api.get_configlet_by_name, configlet)
+            futures_list.append(futures)
+
+        for future in futures_list:
+            try:
+                result = future.result(timeout=60)
+                results.append(result)
+            except Exception:
+                results.append(None)
+    return results
+
+if __name__ == "__main__":
+    # Example with pre-defined list
+    configlets = ["tp-avd_tp-avd-leaf1","tp-avd_tp-avd-leaf2","tp-avd_tp-avd-leaf3","tp-avd_tp-avd-leaf4"]
+
+    # Example with loading list of configlets from a file
+    # with open("configlet_list.txt") as f:
+    #     configlets = f.read().splitlines()
+
+    results = get_list_of_configlets(configlets)
+    for result in results:
+        print(result)
diff --git a/docs/labs/lab03-configlet-management/reorder_configlet_on_device.py b/docs/labs/lab03-configlet-management/reorder_configlet_on_device.py
new file mode 100644
index 0000000..3a5bb6f
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/reorder_configlet_on_device.py
@@ -0,0 +1,26 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+configletNames = ['tp-avd_tp-avd-leaf1','vlan144','api_models']
+
+device_name = "tp-avd-leaf1"
+device = clnt.api.get_device_by_name(device_name)
+
+configlets = []
+
+for name in configletNames:
+    configlets.append(clnt.api.get_configlet_by_name(name))
+
+# Apply configlets in the order specified in the list
+clnt.api.apply_configlets_to_device("", device, configlets, reorder_configlets=True)
diff --git a/docs/labs/lab03-configlet-management/update_configlet.py b/docs/labs/lab03-configlet-management/update_configlet.py
new file mode 100644
index 0000000..b3eb9c0
--- /dev/null
+++ b/docs/labs/lab03-configlet-management/update_configlet.py
@@ -0,0 +1,28 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+# Modify existing configlet
+
+configletName = "cvprac_example"
+
+configlet = """!
+interface Ethernet10
+   description DUB_R04
+   ip address 10.144.144.2/24
+!
+"""
+
+configletID = clnt.api.get_configlet_by_name(configletName)['key']
+
+clnt.api.update_configlet( configlet, configletID, configletName)
diff --git a/docs/labs/lab04-container-management/add_image_to_container.py b/docs/labs/lab04-container-management/add_image_to_container.py
new file mode 100644
index 0000000..99fc05e
--- /dev/null
+++ b/docs/labs/lab04-container-management/add_image_to_container.py
@@ -0,0 +1,21 @@
+# Copyright (c) 2020 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+image_name = "vEOS-4.26.0.1F"
+image = clnt.api.get_image_bundle_by_name(image_name)
+
+container_name = "TP_FABRIC"
+container = clnt.api.get_container_by_name(container_name)
+
+clnt.api.apply_image_to_container(image, container)
diff --git a/docs/labs/lab04-container-management/assign_configlet_to_container.py b/docs/labs/lab04-container-management/assign_configlet_to_container.py
new file mode 100644
index 0000000..a6e8828
--- /dev/null
+++ b/docs/labs/lab04-container-management/assign_configlet_to_container.py
@@ -0,0 +1,23 @@
+# Copyright (c) 2020 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username="username",password="password")
+
+container_name = "TP_LEAFS"
+
+configletName = 'cvprac_example2'
+
+container = clnt.api.get_container_by_name(container_name)
+
+configlet = clnt.api.get_configlet_by_name(configletName)
+
+clnt.api.apply_configlets_to_container("", container, [configlet])
diff --git a/docs/labs/lab04-container-management/create_container.py b/docs/labs/lab04-container-management/create_container.py
new file mode 100644
index 0000000..6e5b8dc
--- /dev/null
+++ b/docs/labs/lab04-container-management/create_container.py
@@ -0,0 +1,20 @@
+# Copyright (c) 2020 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+# Get parent container information
+parent = clnt.api.get_container_by_name("ContainerA")
+
+# Create new container ContainerB under ContainerA
+
+clnt.api.add_container("ContainerB",parent["name"],parent["key"])
diff --git a/docs/labs/lab04-container-management/remove_image_from_container.py b/docs/labs/lab04-container-management/remove_image_from_container.py
new file mode 100644
index 0000000..8a48be8
--- /dev/null
+++ b/docs/labs/lab04-container-management/remove_image_from_container.py
@@ -0,0 +1,21 @@
+# Copyright (c) 2020 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+image_name = "vEOS-4.26.0.1F"
+image = clnt.api.get_image_bundle_by_name(image_name)
+
+container_name = "TP_FABRIC"
+container = clnt.api.get_container_by_name(container_name)
+
+clnt.api.remove_image_from_container(image, container)
diff --git a/docs/labs/lab04-container-management/rename_container.py b/docs/labs/lab04-container-management/rename_container.py
new file mode 100644
index 0000000..74f4562
--- /dev/null
+++ b/docs/labs/lab04-container-management/rename_container.py
@@ -0,0 +1,32 @@
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+oldName = "test"
+newName = "test121"
+
+container_id = clnt.api.get_container_by_name(oldName)['key']
+
+data = {"data":[{"info": "Container {} renamed from {}".format(newName, oldName),
+                "infoPreview": "Container {} renamed from {}".format(newName, oldName),
+                "action": "update",
+                "nodeType": "container",
+                "nodeId": container_id,
+                "toId":"",
+                "fromId":"",
+                "nodeName": newName,
+                "fromName": "",
+                "toName": "",
+                "toIdType": "container",
+                "oldNodeName": oldName
+                }
+            ]
+        }
+
+clnt.api._add_temp_action(data)
+clnt.api._save_topology_v2([])
diff --git a/docs/labs/lab05-device-management/add_image_to_devices.py b/docs/labs/lab05-device-management/add_image_to_devices.py
new file mode 100644
index 0000000..9150a3c
--- /dev/null
+++ b/docs/labs/lab05-device-management/add_image_to_devices.py
@@ -0,0 +1,21 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+image_name = "vEOS-4.26.0.1F"
+image = clnt.api.get_image_bundle_by_name(image_name)
+
+device_name = "tp-avd-leaf2"
+device  = clnt.api.get_device_by_name(device_name)
+
+clnt.api.apply_image_to_device(image, device)
diff --git a/docs/labs/lab05-device-management/add_image_wo_tempaction.py b/docs/labs/lab05-device-management/add_image_wo_tempaction.py
new file mode 100644
index 0000000..1100a5a
--- /dev/null
+++ b/docs/labs/lab05-device-management/add_image_wo_tempaction.py
@@ -0,0 +1,100 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import json
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+image_name = "vEOS-4.26.0.1F"
+image = clnt.api.get_image_bundle_by_name(image_name)
+
+device_name = "tp-avd-leaf2"
+device  = clnt.api.get_device_by_name(device_name)
+
+def apply_image_to_element_no_temp(image, element, name, id_type, create_task=True):
+    ''' Apply an image bundle to a device or container
+        A copy of the appl_image_to_element() function without creating a tempAction.
+        Useful in situations where we need to call saveTopology on a per tempAction basis,
+        which is only possible if the addTempAction function is not used and the data
+        that we would've passed in the addTempAction call is passed in the
+        saveTopology call.
+        Args:
+            image (dict): The image info.
+            element (dict): Info about the element to apply an image to. Dict
+                can contain device info or container info.
+            name (str): Name of the element the image is being applied to.
+            id_type (str): - Id type of the element the image is being applied to
+                            - can be 'netelement' or 'container'
+            create_task (bool): Determines whether or not to execute a save
+                and create the tasks (if any)
+        Returns:
+            response (list): A list that contains the tempAction data
+                Ex: [{'NetworkRollbackTask': False,
+                      'taskJson': '[{
+                        "info": "Apply image: vEOS-4.26.0.1F to netelement tp-avd-leaf2",
+                        "infoPreview": "Apply image: vEOS-4.26.0.1F to netelement tp-avd-leaf2",
+                        "note": "",
+                        "action": "associate", "nodeType":
+                        "imagebundle",
+                        "nodeId": "imagebundle_1622072231719691917",
+                        "toId": "50:08:00:b1:5b:0b",
+                        "toIdType": "netelement",
+                        "fromId": "",
+                        "nodeName": "vEOS-4.26.0.1F",
+                        "fromName": "", "
+                        toName": "tp-avd-leaf2",
+                        "childTasks": [],
+                        "parentTask": ""}]'}]
+    '''
+
+    print('Attempt to apply %s to %s %s' % (image['name'],
+                                                        id_type, name))
+    info = 'Apply image: %s to %s %s' % (image['name'], id_type, name)
+    node_id = ''
+    if 'imageBundleKeys' in image:
+        if image['imageBundleKeys']:
+            node_id = image['imageBundleKeys'][0]
+        print('Provided image is an image object.'
+                        ' Using first value from imageBundleKeys - %s'
+                        % node_id)
+    if 'id' in image:
+        node_id = image['id']
+        print('Provided image is an image bundle object.'
+                        ' Found v1 API id field - %s' % node_id)
+    elif 'key' in image:
+        node_id = image['key']
+        print('Provided image is an image bundle object.'
+                        ' Found v2 API key field - %s' % node_id)
+    data = [
+      {
+      "NetworkRollbackTask": False,
+      "taskJson": json.dumps([{'info': info,
+                        'infoPreview': info,
+                        'note': '',
+                        'action': 'associate',
+                        'nodeType': 'imagebundle',
+                        'nodeId': node_id,
+                        'toId': element['key'],
+                        'toIdType': id_type,
+                        'fromId': '',
+                        'nodeName': image['name'],
+                        'fromName': '',
+                        'toName': name,
+                        'childTasks': [],
+                        'parentTask': ''}])
+      }
+    ]
+    return data
+
+create_task = False
+tempAction = apply_image_to_element_no_temp(image, device, device['fqdn'], 'netelement', create_task)
+
+clnt.api._save_topology_v2(tempAction)
\ No newline at end of file
diff --git a/docs/labs/lab05-device-management/remove_image_from_device.py b/docs/labs/lab05-device-management/remove_image_from_device.py
new file mode 100644
index 0000000..5e9910c
--- /dev/null
+++ b/docs/labs/lab05-device-management/remove_image_from_device.py
@@ -0,0 +1,21 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+image_name = "vEOS-4.26.0.1F"
+image = clnt.api.get_image_bundle_by_name(image_name)
+
+device_name = "tp-avd-leaf2"
+device  = clnt.api.get_device_by_name(device_name)
+
+clnt.api.remove_image_from_device(image, device)
diff --git a/docs/labs/lab05-device-management/set_mgmt_ip.py b/docs/labs/lab05-device-management/set_mgmt_ip.py
new file mode 100644
index 0000000..f0c33f1
--- /dev/null
+++ b/docs/labs/lab05-device-management/set_mgmt_ip.py
@@ -0,0 +1,34 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+
+data = {"data":[{"info":"Device IP Address Changed",
+                "infoPreview":"<b> Device IP Address Changed to 10.83.13.214</b>",
+                "action":"associate",
+                "nodeType":"ipaddress",
+                "nodeId":"",
+                "toId":"50:08:00:a7:ca:c3",          # MAC of the device
+                "fromId":"",
+                "nodeName":"",
+                "fromName":"",
+                "toName":"tp-avd-leaf1",             # hostname
+                "toIdType":"netelement",
+                "nodeIpAddress":"10.83.13.219",      # the temporary management IP Address
+                "nodeTargetIpAddress":"10.83.13.214" # the final management IP address
+                }
+            ]
+        }
+clnt.api._add_temp_action(data)
+
+clnt.api._save_topology_v2([])
diff --git a/docs/labs/lab06-provisioning/atd_e2e_provisioning_workflow.py b/docs/labs/lab06-provisioning/atd_e2e_provisioning_workflow.py
new file mode 100644
index 0000000..8d4445f
--- /dev/null
+++ b/docs/labs/lab06-provisioning/atd_e2e_provisioning_workflow.py
@@ -0,0 +1,120 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+# This script is an example on provisioning registered devices in CloudVision that is based on
+# Arista Test Drive (ATD) and similar to what the ansible playbooks do in
+# https://github.com/arista-netdevops-community/atd-avd.
+# It does the following:
+# - creates and uploads configlets,
+# - creates the container hierarchy in Network Provisiong
+# - moves the devices to their target containers
+# - assigns the configlets to the devices
+# - creates a change control from the genereated tasks
+# - approves and executes the change control
+
+import uuid
+import time
+import ssl
+from datetime import datetime
+from cvprac.cvp_client import CvpClient
+ssl._create_default_https_context = ssl._create_unverified_context
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+# Create container topology
+container_name = "DC1_LEAFS"
+container_topology = [{"containerName": "ATD_FABRIC", "parentContainerName": 'Tenant'},
+                      {"containerName": "ATD_LEAFS", "parentContainerName": 'ATD_FABRIC'},
+                      {"containerName": "pod1", "parentContainerName": 'ATD_LEAFS'},
+                      {"containerName": "pod2", "parentContainerName": 'ATD_LEAFS'},
+                      {"containerName": "ATD_SERVERS", "parentContainerName": 'ATD_FABRIC'},
+                      {"containerName": "ATD_SPINES", "parentContainerName": 'ATD_FABRIC'},
+                      {"containerName": "ATD_TENANT_NETWORKS", "parentContainerName": 'ATD_FABRIC'}]
+for container in container_topology:
+    try:
+        container_name = container['containerName']
+        # Get parent container information
+        parent = clnt.api.get_container_by_name(container['parentContainerName'])
+        print(f'Creating container {container_name}\n')
+        clnt.api.add_container(container_name,parent["name"],parent["key"])
+    except Exception as e:
+        if "Data already exists in Database" in str(e):
+            print ("Container already exists, continuing...")
+
+# Create device mappers
+devices = [{'deviceName': "leaf1",
+            'configlets': ["BaseIPv4_Leaf1", "AVD_leaf1"],
+            "parentContainerName": "pod1"},
+           {'deviceName': "leaf2",
+            'configlets': ["BaseIPv4_Leaf2", "AVD_leaf2"],
+            "parentContainerName": "pod1"},
+           {'deviceName': "leaf3",
+            'configlets': ["BaseIPv4_Leaf3", "AVD_leaf3"],
+            "parentContainerName": "pod2"},
+           {'deviceName': "leaf4",
+            'configlets': ["BaseIPv4_Leaf4", "AVD_leaf4"],
+            "parentContainerName": "pod2"},
+           {'deviceName': "spine1",
+            'configlets': ["BaseIPv4_Spine1", "AVD_spine1"],
+            "parentContainerName": "ATD_SPINES"},
+           {'deviceName': "spine2",
+            'configlets': ["BaseIPv4_Spine2", "AVD_spine2"],
+            "parentContainerName": "ATD_SPINES"}]
+
+task_list = []
+for device in devices:
+    # Load the AVD configlets from file
+    with open("./configlets/AVD_" + device['deviceName'] + ".cfg", "r") as file:
+        configlet_file = file.read()
+    avd_configlet_name = device['configlets'][1]
+    base_configlet_name = device['configlets'][0] # preloaded configlet in an ATD environment
+    container_name = device['parentContainerName']
+    base_configlet = clnt.api.get_configlet_by_name(base_configlet_name)
+    configlets = [base_configlet]
+    # Update the AVD configlets if they exist, otherwise upload them from the configlets folder
+    print (f"Creating configlet {avd_configlet_name} for {device['deviceName']}\n")
+    try:
+        configlet = clnt.api.get_configlet_by_name(avd_configlet_name)
+        clnt.api.update_configlet(configlet_file, configlet['key'], avd_configlet_name)
+        configlets.append(configlet)
+    except:
+        clnt.api.add_configlet(avd_configlet_name, configlet_file)
+        configlet = clnt.api.get_configlet_by_name(avd_configlet_name)
+        configlets.append(configlet)
+    # Get device data
+    device_data = clnt.api.get_device_by_name(device['deviceName'] + ".atd.lab")
+    # Get the parent container data for the device
+    container = clnt.api.get_container_by_name(container_name)
+    device_name = device['deviceName']
+    print(f"Moving device {device_name} to container {container_name}\n")
+    # The move action will create the task first, however if the devices are already in the target
+    # container, for instance if the script was run multiple times than the move action will
+    # not generate a task anymore, therefore it's better to create the task list from the
+    # Update Config action which will reuse the Move Device action's task if one exists,
+    # otherwise will create a new one.
+    move = clnt.api.move_device_to_container("python", device_data, container)
+    apply_configlets = clnt.api.apply_configlets_to_device("", device_data, configlets)
+    task_list = task_list + apply_configlets['data']['taskIds']
+
+print(f"Generated task IDs are: {task_list}\n")
+
+# Generate unique ID for the change control
+cc_id = str(uuid.uuid4())
+cc_name = f"Change_{datetime.now().strftime('%Y%m%d_%H%M%S')}"
+
+print("Creating Change control with the list of tasks")
+clnt.api.change_control_create_for_tasks(cc_id, cc_name, task_list, series=False)
+
+print("Approving Change Control")
+# adding a few seconds sleep to avoid small time diff between the local system and CVP
+time.sleep(2)
+approve_note = "Approving CC via cvprac"
+clnt.api.change_control_approve(cc_id, notes=approve_note)
+
+# Start the change control
+print("Executing Change Control...")
+start_note = "Start the CC via cvprac"
+clnt.api.change_control_start(cc_id, notes=start_note)
diff --git a/docs/labs/lab06-provisioning/auto_reconcile_on_rc_change.py b/docs/labs/lab06-provisioning/auto_reconcile_on_rc_change.py
new file mode 100644
index 0000000..cff820d
--- /dev/null
+++ b/docs/labs/lab06-provisioning/auto_reconcile_on_rc_change.py
@@ -0,0 +1,64 @@
+# Copyright (c) 2022 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+# This script can be run as a cronjob to periodically reconcile all devices
+# that are out of configuration compliance in environments where the running-config
+# is still modified via the CLI often.
+from cvprac.cvp_client import CvpClient
+import ssl
+from datetime import datetime
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+clnt = CvpClient()
+clnt.set_log_level(log_level='WARNING')
+
+# Reading the service account token from a file
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='',password='',api_token=token)
+
+inventory = clnt.api.get_inventory()
+
+compliance = {"0001": "Config is out of sync",
+        "0003": "Config & image out of sync",
+        "0004": "Config, Image and Device time are in sync",
+        "0005": "Device is not reachable",
+        "0008": "Config, Image and Extensions are out of sync",
+        "0009": "Config and Extensions are out of sync",
+        "0012": "Config, Image, Extension and Device time are out of sync",
+        "0013": "Config, Image and Device time are out of sync",
+        "0014": "Config, Extensions and Device time are out of sync",
+        "0016": "Config and Device time are out of sync"
+    }
+
+non_compliants = []
+taskIds = []
+for device in inventory:
+    if device['complianceCode'] in compliance.keys():
+        # create a list of non-compliant devices for reporting purposes
+        non_compliants.append(device['hostname'])
+        dev_mac = device['systemMacAddress']
+        # check if device already has reconciled config and save the key if it does
+        try:
+            configlets = clnt.api.get_configlets_by_device_id(dev_mac)
+            for configlet in configlets:
+                if configlet['reconciled'] == True:
+                    configlet_key = configlet['key']
+                    break
+                else:
+                    configlet_key = ""
+            rc = clnt.api.get_device_configuration(dev_mac)
+            name = 'RECONCILE_' + device['serialNumber']
+            update = clnt.api.update_reconcile_configlet(dev_mac, rc, configlet_key, name, True)
+            # if the device had no reconciled config, it means we need to append the reconciled
+            # configlet to the list of applied configlets on the device
+            if configlet_key == "":
+                addcfg = clnt.api.apply_configlets_to_device("auto-reconciling",device,[update['data']])
+                clnt.api.cancel_task(addcfg['data']['taskIds'][0])            
+        except Exception as e:
+            continue
+print(f"The non compliant devices were: {str(non_compliants)}")
diff --git a/docs/labs/lab06-provisioning/change_control_custom_rapi.py b/docs/labs/lab06-provisioning/change_control_custom_rapi.py
new file mode 100644
index 0000000..0290af7
--- /dev/null
+++ b/docs/labs/lab06-provisioning/change_control_custom_rapi.py
@@ -0,0 +1,81 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# NOTE: The following example is using the new Change Control Resource APIs supported in 2021.2.0 or newer and in CVaaS.
+# For CVaaS service-account token based auth has to be used.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+import uuid
+from datetime import datetime
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+
+cc_id = str(uuid.uuid4())
+name = f"Change_{datetime.now().strftime('%Y%m%d_%H%M%S')}"
+
+# Create custom stage hierarchy
+# The below example would result in the following hierarchy:
+# root (series)
+# |- stages 1-2 (series)
+# |  |- stage 1ab (parallel)
+# |  |    |- stage 1a
+# |  |    |- stage 1b
+# |  |- stage 2
+# |- stage 3
+data = {'key': {
+            'id': cc_id
+            },
+        'change': {
+            'name': cc_id,
+            'notes': 'cvprac CC',
+            'rootStageId': 'root',
+            'stages': {'values': {'root': {'name': 'root',
+                                           'rows': {'values': [{'values': ['1-2']},
+                                                               {'values': ['3']}]
+                                            }
+                                        },
+                                  '1-2': {'name': 'stages 1-2',
+                                          'rows': {'values': [{'values': ['1ab']},
+                                                              {'values': ['2']}]}},
+                                  '1ab': {'name': 'stage 1ab',
+                                          'rows': {'values': [{'values': ['1a','1b']}]
+                                            }
+                                        },
+                                  '1a': {'action': {'args': {'values': {'TaskID': '1242'}},
+                                                    'name': 'task',
+                                                    'timeout': 3000},
+                                         'name': 'stage 1a'},
+                                  '1b': {'action': {'args': {'values': {'TaskID': '1243'}},
+                                                    'name': 'task',
+                                                    'timeout': 3000},
+                                         'name': 'stage 1b'},
+                                  '2': {'action': {'args': {'values': {'TaskID': '1240'}},
+                                                   'name': 'task',
+                                                   'timeout': 3000},
+                                        'name': 'stage 2'},
+                                  '3': {'action': {'args': {'values': {'TaskID': '1241'}},
+                                                   'name': 'task',
+                                                   'timeout': 3000},
+                                        'name': 'stage 3'},
+                }
+            }
+        }
+ }
+# Create change control from custom stage hierarchy data
+clnt.api.change_control_create_with_custom_stages(data)
+
+# Approve the change control
+approval_note = "Approve CC via cvprac" # notes are optional
+clnt.api.change_control_approve(cc_id, notes=approval_note)
+
+# Start the change control
+start_note = "Starting CC via cvprac" # notes are optional
+clnt.api.change_control_start(cc_id, notes=start_note)
diff --git a/docs/labs/lab06-provisioning/change_control_workflow.py b/docs/labs/lab06-provisioning/change_control_workflow.py
new file mode 100644
index 0000000..c374edf
--- /dev/null
+++ b/docs/labs/lab06-provisioning/change_control_workflow.py
@@ -0,0 +1,27 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from datetime import datetime
+
+# Note API token auth method is not yet supported with Change Controls
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+ccid = 'cvprac0904211418'
+name = "cvprac CC test"
+tlist = ['1021','1020','1019','1018']
+
+### Create Change control with the list of tasks
+clnt.api.create_change_control_v3(ccid, name, tlist)
+
+### Approve CC
+clnt.api.approve_change_control('cvprac0904211418', timestamp=datetime.utcnow().isoformat() + 'Z')
+
+### Execute CC
+clnt.api.execute_change_controls(['cvprac0904211418'])
diff --git a/docs/labs/lab06-provisioning/change_control_workflow_rapi.py b/docs/labs/lab06-provisioning/change_control_workflow_rapi.py
new file mode 100644
index 0000000..299d16a
--- /dev/null
+++ b/docs/labs/lab06-provisioning/change_control_workflow_rapi.py
@@ -0,0 +1,40 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# NOTE: The following example is using the new Change Control Resource APIs supported in 2021.2.0 or newer and in CVaaS.
+# For CVaaS service-account token based auth has to be used.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+import uuid
+from datetime import datetime
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+# Generate change control id and change control name
+cc_id = str(uuid.uuid4())
+name = f"Change_{datetime.now().strftime('%Y%m%d_%H%M%S')}"
+
+# Select the tasks and create a CC where all tasks will be run in parallel
+tasks = ["1249","1250","1251","1252"]
+clnt.api.change_control_create_for_tasks(cc_id, name, tasks, series=False)
+
+# Approve the change control
+approve_note = "Approving CC via cvprac"
+clnt.api.change_control_approve(cc_id, notes=approve_note)
+
+# # Schedule the change control
+# # Executing scheduled CCs might only work post 2021.3.0+
+# schedule_note = "Scheduling CC via cvprac"
+# schedule_time = "2021-12-23T03:17:00Z"
+# clnt.api.change_control_schedule(cc_id,schedule_time,notes=schedule_note)
+
+# Start the change control
+start_note = "Start the CC via cvprac"
+clnt.api.change_control_start(cc_id, notes=start_note)
\ No newline at end of file
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_leaf1.cfg b/docs/labs/lab06-provisioning/configlets/AVD_leaf1.cfg
new file mode 100644
index 0000000..1339d6f
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_leaf1.cfg
@@ -0,0 +1,255 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname leaf1
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+no spanning-tree vlan-id 4093-4094
+spanning-tree mst 0 priority 16384
+!
+no enable password
+no aaa root
+!
+vlan 110
+   name Tenant_A_OP_Zone_1
+!
+vlan 160
+   name Tenant_A_VMOTION
+!
+vlan 3009
+   name MLAG_iBGP_Tenant_A_OP_Zone
+   trunk group LEAF_PEER_L3
+!
+vlan 4093
+   name LEAF_PEER_L3
+   trunk group LEAF_PEER_L3
+!
+vlan 4094
+   name MLAG_PEER
+   trunk group MLAG
+!
+vrf instance Tenant_A_OP_Zone
+!
+interface Port-Channel1
+   description MLAG_PEER_leaf2_Po1
+   no shutdown
+   switchport
+   switchport trunk allowed vlan 2-4094
+   switchport mode trunk
+   switchport trunk group LEAF_PEER_L3
+   switchport trunk group MLAG
+!
+interface Port-Channel4
+   description host1_PortChannel
+   no shutdown
+   switchport
+   switchport access vlan 110
+   mlag 4
+!
+interface Ethernet1
+   description MLAG_PEER_leaf2_Ethernet1
+   no shutdown
+   channel-group 1 mode active
+!
+interface Ethernet2
+   description P2P_LINK_TO_SPINE1_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.1/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_SPINE2_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.3/31
+!
+interface Ethernet4
+   description host1_Eth1
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet5
+   description host1_Eth2
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet6
+   description MLAG_PEER_leaf2_Ethernet6
+   no shutdown
+   channel-group 1 mode active
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.3/32
+!
+interface Loopback1
+   description VTEP_VXLAN_Tunnel_Source
+   no shutdown
+   ip address 192.0.254.3/32
+!
+interface Loopback100
+   description Tenant_A_OP_Zone_VTEP_DIAGNOSTICS
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.1.3/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.12/24
+!
+interface Vlan110
+   description Tenant_A_OP_Zone_1
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address virtual 10.1.10.1/24
+!
+interface Vlan3009
+   description MLAG_PEER_L3_iBGP: vrf Tenant_A_OP_Zone
+   no shutdown
+   mtu 1500
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.251.0/31
+!
+interface Vlan4093
+   description MLAG_PEER_L3_PEERING
+   no shutdown
+   mtu 1500
+   ip address 10.255.251.0/31
+!
+interface Vlan4094
+   description MLAG_PEER
+   no shutdown
+   mtu 1500
+   no autostate
+   ip address 10.255.252.0/31
+!
+interface Vxlan1
+   description leaf1_VTEP
+   vxlan source-interface Loopback1
+   vxlan virtual-router encapsulation mac-address mlag-system-id
+   vxlan udp-port 4789
+   vxlan vlan 110 vni 10110
+   vxlan vlan 160 vni 55160
+   vxlan vrf Tenant_A_OP_Zone vni 10
+!
+ip virtual-router mac-address 00:1c:73:00:dc:01
+!
+ip address virtual source-nat vrf Tenant_A_OP_Zone address 10.255.1.3
+!
+ip routing
+ip routing vrf Tenant_A_OP_Zone
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+   seq 20 permit 192.0.254.0/24 eq 32
+!
+mlag configuration
+   domain-id pod1
+   local-interface Vlan4094
+   peer-address 10.255.252.1
+   peer-link Port-Channel1
+   reload-delay mlag 300
+   reload-delay non-mlag 330
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+route-map RM-MLAG-PEER-IN permit 10
+   description Make routes learned over MLAG Peer-link less preferred on spines to ensure optimal routing
+   set origin incomplete
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65101
+   router-id 192.0.255.3
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER peer group
+   neighbor MLAG-IPv4-UNDERLAY-PEER remote-as 65101
+   neighbor MLAG-IPv4-UNDERLAY-PEER next-hop-self
+   neighbor MLAG-IPv4-UNDERLAY-PEER description leaf2
+   neighbor MLAG-IPv4-UNDERLAY-PEER password 7 vnEaG8gMeQf3d3cN6PktXQ==
+   neighbor MLAG-IPv4-UNDERLAY-PEER send-community
+   neighbor MLAG-IPv4-UNDERLAY-PEER maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER route-map RM-MLAG-PEER-IN in
+   neighbor 10.255.251.1 peer group MLAG-IPv4-UNDERLAY-PEER
+   neighbor 10.255.251.1 description leaf2
+   neighbor 172.30.255.0 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.0 remote-as 65001
+   neighbor 172.30.255.0 description spine1_Ethernet2
+   neighbor 172.30.255.2 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.2 remote-as 65001
+   neighbor 172.30.255.2 description spine2_Ethernet2
+   neighbor 192.0.255.1 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.1 remote-as 65001
+   neighbor 192.0.255.1 description spine1
+   neighbor 192.0.255.2 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.2 remote-as 65001
+   neighbor 192.0.255.2 description spine2
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   vlan-aware-bundle Tenant_A_OP_Zone
+      rd 192.0.255.3:10
+      route-target both 10:10
+      redistribute learned
+      vlan 110
+   !
+   vlan-aware-bundle Tenant_A_VMOTION
+      rd 192.0.255.3:55160
+      route-target both 55160:55160
+      redistribute learned
+      vlan 160
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+      neighbor MLAG-IPv4-UNDERLAY-PEER activate
+   !
+   vrf Tenant_A_OP_Zone
+      rd 192.0.255.3:10
+      route-target import evpn 10:10
+      route-target export evpn 10:10
+      router-id 192.0.255.3
+      neighbor 10.255.251.1 peer group MLAG-IPv4-UNDERLAY-PEER
+      redistribute connected
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_leaf2.cfg b/docs/labs/lab06-provisioning/configlets/AVD_leaf2.cfg
new file mode 100644
index 0000000..7305516
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_leaf2.cfg
@@ -0,0 +1,255 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname leaf2
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+no spanning-tree vlan-id 4093-4094
+spanning-tree mst 0 priority 16384
+!
+no enable password
+no aaa root
+!
+vlan 110
+   name Tenant_A_OP_Zone_1
+!
+vlan 160
+   name Tenant_A_VMOTION
+!
+vlan 3009
+   name MLAG_iBGP_Tenant_A_OP_Zone
+   trunk group LEAF_PEER_L3
+!
+vlan 4093
+   name LEAF_PEER_L3
+   trunk group LEAF_PEER_L3
+!
+vlan 4094
+   name MLAG_PEER
+   trunk group MLAG
+!
+vrf instance Tenant_A_OP_Zone
+!
+interface Port-Channel1
+   description MLAG_PEER_leaf1_Po1
+   no shutdown
+   switchport
+   switchport trunk allowed vlan 2-4094
+   switchport mode trunk
+   switchport trunk group LEAF_PEER_L3
+   switchport trunk group MLAG
+!
+interface Port-Channel4
+   description host1_PortChannel
+   no shutdown
+   switchport
+   switchport access vlan 110
+   mlag 4
+!
+interface Ethernet1
+   description MLAG_PEER_leaf1_Ethernet1
+   no shutdown
+   channel-group 1 mode active
+!
+interface Ethernet2
+   description P2P_LINK_TO_SPINE1_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.5/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_SPINE2_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.7/31
+!
+interface Ethernet4
+   description host1_Eth3
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet5
+   description host1_Eth4
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet6
+   description MLAG_PEER_leaf1_Ethernet6
+   no shutdown
+   channel-group 1 mode active
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.4/32
+!
+interface Loopback1
+   description VTEP_VXLAN_Tunnel_Source
+   no shutdown
+   ip address 192.0.254.3/32
+!
+interface Loopback100
+   description Tenant_A_OP_Zone_VTEP_DIAGNOSTICS
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.1.4/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.13/24
+!
+interface Vlan110
+   description Tenant_A_OP_Zone_1
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address virtual 10.1.10.1/24
+!
+interface Vlan3009
+   description MLAG_PEER_L3_iBGP: vrf Tenant_A_OP_Zone
+   no shutdown
+   mtu 1500
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.251.1/31
+!
+interface Vlan4093
+   description MLAG_PEER_L3_PEERING
+   no shutdown
+   mtu 1500
+   ip address 10.255.251.1/31
+!
+interface Vlan4094
+   description MLAG_PEER
+   no shutdown
+   mtu 1500
+   no autostate
+   ip address 10.255.252.1/31
+!
+interface Vxlan1
+   description leaf2_VTEP
+   vxlan source-interface Loopback1
+   vxlan virtual-router encapsulation mac-address mlag-system-id
+   vxlan udp-port 4789
+   vxlan vlan 110 vni 10110
+   vxlan vlan 160 vni 55160
+   vxlan vrf Tenant_A_OP_Zone vni 10
+!
+ip virtual-router mac-address 00:1c:73:00:dc:01
+!
+ip address virtual source-nat vrf Tenant_A_OP_Zone address 10.255.1.4
+!
+ip routing
+ip routing vrf Tenant_A_OP_Zone
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+   seq 20 permit 192.0.254.0/24 eq 32
+!
+mlag configuration
+   domain-id pod1
+   local-interface Vlan4094
+   peer-address 10.255.252.0
+   peer-link Port-Channel1
+   reload-delay mlag 300
+   reload-delay non-mlag 330
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+route-map RM-MLAG-PEER-IN permit 10
+   description Make routes learned over MLAG Peer-link less preferred on spines to ensure optimal routing
+   set origin incomplete
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65101
+   router-id 192.0.255.4
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER peer group
+   neighbor MLAG-IPv4-UNDERLAY-PEER remote-as 65101
+   neighbor MLAG-IPv4-UNDERLAY-PEER next-hop-self
+   neighbor MLAG-IPv4-UNDERLAY-PEER description leaf1
+   neighbor MLAG-IPv4-UNDERLAY-PEER password 7 vnEaG8gMeQf3d3cN6PktXQ==
+   neighbor MLAG-IPv4-UNDERLAY-PEER send-community
+   neighbor MLAG-IPv4-UNDERLAY-PEER maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER route-map RM-MLAG-PEER-IN in
+   neighbor 10.255.251.0 peer group MLAG-IPv4-UNDERLAY-PEER
+   neighbor 10.255.251.0 description leaf1
+   neighbor 172.30.255.4 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.4 remote-as 65001
+   neighbor 172.30.255.4 description spine1_Ethernet3
+   neighbor 172.30.255.6 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.6 remote-as 65001
+   neighbor 172.30.255.6 description spine2_Ethernet3
+   neighbor 192.0.255.1 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.1 remote-as 65001
+   neighbor 192.0.255.1 description spine1
+   neighbor 192.0.255.2 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.2 remote-as 65001
+   neighbor 192.0.255.2 description spine2
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   vlan-aware-bundle Tenant_A_OP_Zone
+      rd 192.0.255.4:10
+      route-target both 10:10
+      redistribute learned
+      vlan 110
+   !
+   vlan-aware-bundle Tenant_A_VMOTION
+      rd 192.0.255.4:55160
+      route-target both 55160:55160
+      redistribute learned
+      vlan 160
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+      neighbor MLAG-IPv4-UNDERLAY-PEER activate
+   !
+   vrf Tenant_A_OP_Zone
+      rd 192.0.255.4:10
+      route-target import evpn 10:10
+      route-target export evpn 10:10
+      router-id 192.0.255.4
+      neighbor 10.255.251.0 peer group MLAG-IPv4-UNDERLAY-PEER
+      redistribute connected
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_leaf3.cfg b/docs/labs/lab06-provisioning/configlets/AVD_leaf3.cfg
new file mode 100644
index 0000000..b71d210
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_leaf3.cfg
@@ -0,0 +1,255 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname leaf3
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+no spanning-tree vlan-id 4093-4094
+spanning-tree mst 0 priority 16384
+!
+no enable password
+no aaa root
+!
+vlan 110
+   name Tenant_A_OP_Zone_1
+!
+vlan 160
+   name Tenant_A_VMOTION
+!
+vlan 3009
+   name MLAG_iBGP_Tenant_A_OP_Zone
+   trunk group LEAF_PEER_L3
+!
+vlan 4093
+   name LEAF_PEER_L3
+   trunk group LEAF_PEER_L3
+!
+vlan 4094
+   name MLAG_PEER
+   trunk group MLAG
+!
+vrf instance Tenant_A_OP_Zone
+!
+interface Port-Channel1
+   description MLAG_PEER_leaf4_Po1
+   no shutdown
+   switchport
+   switchport trunk allowed vlan 2-4094
+   switchport mode trunk
+   switchport trunk group LEAF_PEER_L3
+   switchport trunk group MLAG
+!
+interface Port-Channel4
+   description host2_PortChannel
+   no shutdown
+   switchport
+   switchport access vlan 110
+   mlag 4
+!
+interface Ethernet1
+   description MLAG_PEER_leaf4_Ethernet1
+   no shutdown
+   channel-group 1 mode active
+!
+interface Ethernet2
+   description P2P_LINK_TO_SPINE1_Ethernet4
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.9/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_SPINE2_Ethernet4
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.11/31
+!
+interface Ethernet4
+   description host2_Eth1
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet5
+   description host2_Eth2
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet6
+   description MLAG_PEER_leaf4_Ethernet6
+   no shutdown
+   channel-group 1 mode active
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.5/32
+!
+interface Loopback1
+   description VTEP_VXLAN_Tunnel_Source
+   no shutdown
+   ip address 192.0.254.5/32
+!
+interface Loopback100
+   description Tenant_A_OP_Zone_VTEP_DIAGNOSTICS
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.1.5/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.14/24
+!
+interface Vlan110
+   description Tenant_A_OP_Zone_1
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address virtual 10.1.10.1/24
+!
+interface Vlan3009
+   description MLAG_PEER_L3_iBGP: vrf Tenant_A_OP_Zone
+   no shutdown
+   mtu 1500
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.251.4/31
+!
+interface Vlan4093
+   description MLAG_PEER_L3_PEERING
+   no shutdown
+   mtu 1500
+   ip address 10.255.251.4/31
+!
+interface Vlan4094
+   description MLAG_PEER
+   no shutdown
+   mtu 1500
+   no autostate
+   ip address 10.255.252.4/31
+!
+interface Vxlan1
+   description leaf3_VTEP
+   vxlan source-interface Loopback1
+   vxlan virtual-router encapsulation mac-address mlag-system-id
+   vxlan udp-port 4789
+   vxlan vlan 110 vni 10110
+   vxlan vlan 160 vni 55160
+   vxlan vrf Tenant_A_OP_Zone vni 10
+!
+ip virtual-router mac-address 00:1c:73:00:dc:01
+!
+ip address virtual source-nat vrf Tenant_A_OP_Zone address 10.255.1.5
+!
+ip routing
+ip routing vrf Tenant_A_OP_Zone
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+   seq 20 permit 192.0.254.0/24 eq 32
+!
+mlag configuration
+   domain-id pod2
+   local-interface Vlan4094
+   peer-address 10.255.252.5
+   peer-link Port-Channel1
+   reload-delay mlag 300
+   reload-delay non-mlag 330
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+route-map RM-MLAG-PEER-IN permit 10
+   description Make routes learned over MLAG Peer-link less preferred on spines to ensure optimal routing
+   set origin incomplete
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65102
+   router-id 192.0.255.5
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER peer group
+   neighbor MLAG-IPv4-UNDERLAY-PEER remote-as 65102
+   neighbor MLAG-IPv4-UNDERLAY-PEER next-hop-self
+   neighbor MLAG-IPv4-UNDERLAY-PEER description leaf4
+   neighbor MLAG-IPv4-UNDERLAY-PEER password 7 vnEaG8gMeQf3d3cN6PktXQ==
+   neighbor MLAG-IPv4-UNDERLAY-PEER send-community
+   neighbor MLAG-IPv4-UNDERLAY-PEER maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER route-map RM-MLAG-PEER-IN in
+   neighbor 10.255.251.5 peer group MLAG-IPv4-UNDERLAY-PEER
+   neighbor 10.255.251.5 description leaf4
+   neighbor 172.30.255.8 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.8 remote-as 65001
+   neighbor 172.30.255.8 description spine1_Ethernet4
+   neighbor 172.30.255.10 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.10 remote-as 65001
+   neighbor 172.30.255.10 description spine2_Ethernet4
+   neighbor 192.0.255.1 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.1 remote-as 65001
+   neighbor 192.0.255.1 description spine1
+   neighbor 192.0.255.2 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.2 remote-as 65001
+   neighbor 192.0.255.2 description spine2
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   vlan-aware-bundle Tenant_A_OP_Zone
+      rd 192.0.255.5:10
+      route-target both 10:10
+      redistribute learned
+      vlan 110
+   !
+   vlan-aware-bundle Tenant_A_VMOTION
+      rd 192.0.255.5:55160
+      route-target both 55160:55160
+      redistribute learned
+      vlan 160
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+      neighbor MLAG-IPv4-UNDERLAY-PEER activate
+   !
+   vrf Tenant_A_OP_Zone
+      rd 192.0.255.5:10
+      route-target import evpn 10:10
+      route-target export evpn 10:10
+      router-id 192.0.255.5
+      neighbor 10.255.251.5 peer group MLAG-IPv4-UNDERLAY-PEER
+      redistribute connected
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_leaf4.cfg b/docs/labs/lab06-provisioning/configlets/AVD_leaf4.cfg
new file mode 100644
index 0000000..80e201d
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_leaf4.cfg
@@ -0,0 +1,255 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname leaf4
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode mstp
+no spanning-tree vlan-id 4093-4094
+spanning-tree mst 0 priority 16384
+!
+no enable password
+no aaa root
+!
+vlan 110
+   name Tenant_A_OP_Zone_1
+!
+vlan 160
+   name Tenant_A_VMOTION
+!
+vlan 3009
+   name MLAG_iBGP_Tenant_A_OP_Zone
+   trunk group LEAF_PEER_L3
+!
+vlan 4093
+   name LEAF_PEER_L3
+   trunk group LEAF_PEER_L3
+!
+vlan 4094
+   name MLAG_PEER
+   trunk group MLAG
+!
+vrf instance Tenant_A_OP_Zone
+!
+interface Port-Channel1
+   description MLAG_PEER_leaf3_Po1
+   no shutdown
+   switchport
+   switchport trunk allowed vlan 2-4094
+   switchport mode trunk
+   switchport trunk group LEAF_PEER_L3
+   switchport trunk group MLAG
+!
+interface Port-Channel4
+   description host2_PortChannel
+   no shutdown
+   switchport
+   switchport access vlan 110
+   mlag 4
+!
+interface Ethernet1
+   description MLAG_PEER_leaf3_Ethernet1
+   no shutdown
+   channel-group 1 mode active
+!
+interface Ethernet2
+   description P2P_LINK_TO_SPINE1_Ethernet5
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.13/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_SPINE2_Ethernet5
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.15/31
+!
+interface Ethernet4
+   description host2_Eth3
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet5
+   description host2_Eth4
+   no shutdown
+   channel-group 4 mode active
+!
+interface Ethernet6
+   description MLAG_PEER_leaf3_Ethernet6
+   no shutdown
+   channel-group 1 mode active
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.6/32
+!
+interface Loopback1
+   description VTEP_VXLAN_Tunnel_Source
+   no shutdown
+   ip address 192.0.254.5/32
+!
+interface Loopback100
+   description Tenant_A_OP_Zone_VTEP_DIAGNOSTICS
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.1.6/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.15/24
+!
+interface Vlan110
+   description Tenant_A_OP_Zone_1
+   no shutdown
+   vrf Tenant_A_OP_Zone
+   ip address virtual 10.1.10.1/24
+!
+interface Vlan3009
+   description MLAG_PEER_L3_iBGP: vrf Tenant_A_OP_Zone
+   no shutdown
+   mtu 1500
+   vrf Tenant_A_OP_Zone
+   ip address 10.255.251.5/31
+!
+interface Vlan4093
+   description MLAG_PEER_L3_PEERING
+   no shutdown
+   mtu 1500
+   ip address 10.255.251.5/31
+!
+interface Vlan4094
+   description MLAG_PEER
+   no shutdown
+   mtu 1500
+   no autostate
+   ip address 10.255.252.5/31
+!
+interface Vxlan1
+   description leaf4_VTEP
+   vxlan source-interface Loopback1
+   vxlan virtual-router encapsulation mac-address mlag-system-id
+   vxlan udp-port 4789
+   vxlan vlan 110 vni 10110
+   vxlan vlan 160 vni 55160
+   vxlan vrf Tenant_A_OP_Zone vni 10
+!
+ip virtual-router mac-address 00:1c:73:00:dc:01
+!
+ip address virtual source-nat vrf Tenant_A_OP_Zone address 10.255.1.6
+!
+ip routing
+ip routing vrf Tenant_A_OP_Zone
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+   seq 20 permit 192.0.254.0/24 eq 32
+!
+mlag configuration
+   domain-id pod2
+   local-interface Vlan4094
+   peer-address 10.255.252.4
+   peer-link Port-Channel1
+   reload-delay mlag 300
+   reload-delay non-mlag 330
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+route-map RM-MLAG-PEER-IN permit 10
+   description Make routes learned over MLAG Peer-link less preferred on spines to ensure optimal routing
+   set origin incomplete
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65102
+   router-id 192.0.255.6
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER peer group
+   neighbor MLAG-IPv4-UNDERLAY-PEER remote-as 65102
+   neighbor MLAG-IPv4-UNDERLAY-PEER next-hop-self
+   neighbor MLAG-IPv4-UNDERLAY-PEER description leaf3
+   neighbor MLAG-IPv4-UNDERLAY-PEER password 7 vnEaG8gMeQf3d3cN6PktXQ==
+   neighbor MLAG-IPv4-UNDERLAY-PEER send-community
+   neighbor MLAG-IPv4-UNDERLAY-PEER maximum-routes 12000
+   neighbor MLAG-IPv4-UNDERLAY-PEER route-map RM-MLAG-PEER-IN in
+   neighbor 10.255.251.4 peer group MLAG-IPv4-UNDERLAY-PEER
+   neighbor 10.255.251.4 description leaf3
+   neighbor 172.30.255.12 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.12 remote-as 65001
+   neighbor 172.30.255.12 description spine1_Ethernet5
+   neighbor 172.30.255.14 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.14 remote-as 65001
+   neighbor 172.30.255.14 description spine2_Ethernet5
+   neighbor 192.0.255.1 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.1 remote-as 65001
+   neighbor 192.0.255.1 description spine1
+   neighbor 192.0.255.2 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.2 remote-as 65001
+   neighbor 192.0.255.2 description spine2
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   vlan-aware-bundle Tenant_A_OP_Zone
+      rd 192.0.255.6:10
+      route-target both 10:10
+      redistribute learned
+      vlan 110
+   !
+   vlan-aware-bundle Tenant_A_VMOTION
+      rd 192.0.255.6:55160
+      route-target both 55160:55160
+      redistribute learned
+      vlan 160
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+      neighbor MLAG-IPv4-UNDERLAY-PEER activate
+   !
+   vrf Tenant_A_OP_Zone
+      rd 192.0.255.6:10
+      route-target import evpn 10:10
+      route-target export evpn 10:10
+      router-id 192.0.255.6
+      neighbor 10.255.251.4 peer group MLAG-IPv4-UNDERLAY-PEER
+      redistribute connected
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_spine1.cfg b/docs/labs/lab06-provisioning/configlets/AVD_spine1.cfg
new file mode 100644
index 0000000..df188d7
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_spine1.cfg
@@ -0,0 +1,129 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname spine1
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode none
+!
+no enable password
+no aaa root
+!
+interface Ethernet2
+   description P2P_LINK_TO_LEAF1_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.0/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_LEAF2_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.4/31
+!
+interface Ethernet4
+   description P2P_LINK_TO_LEAF3_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.8/31
+!
+interface Ethernet5
+   description P2P_LINK_TO_LEAF4_Ethernet2
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.12/31
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.1/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.10/24
+!
+ip routing
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65001
+   router-id 192.0.255.1
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS next-hop-unchanged
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor 172.30.255.1 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.1 remote-as 65101
+   neighbor 172.30.255.1 description leaf1_Ethernet2
+   neighbor 172.30.255.5 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.5 remote-as 65101
+   neighbor 172.30.255.5 description leaf2_Ethernet2
+   neighbor 172.30.255.9 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.9 remote-as 65102
+   neighbor 172.30.255.9 description leaf3_Ethernet2
+   neighbor 172.30.255.13 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.13 remote-as 65102
+   neighbor 172.30.255.13 description leaf4_Ethernet2
+   neighbor 192.0.255.3 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.3 remote-as 65101
+   neighbor 192.0.255.3 description leaf1
+   neighbor 192.0.255.4 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.4 remote-as 65101
+   neighbor 192.0.255.4 description leaf2
+   neighbor 192.0.255.5 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.5 remote-as 65102
+   neighbor 192.0.255.5 description leaf3
+   neighbor 192.0.255.6 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.6 remote-as 65102
+   neighbor 192.0.255.6 description leaf4
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/configlets/AVD_spine2.cfg b/docs/labs/lab06-provisioning/configlets/AVD_spine2.cfg
new file mode 100644
index 0000000..0ad7bd1
--- /dev/null
+++ b/docs/labs/lab06-provisioning/configlets/AVD_spine2.cfg
@@ -0,0 +1,129 @@
+!RANCID-CONTENT-TYPE: arista
+!
+vlan internal order ascending range 1006 1199
+!
+transceiver qsfp default-mode 4x10G
+!
+service routing protocols model multi-agent
+!
+hostname spine2
+ip name-server vrf default 8.8.8.8
+ip name-server vrf default 192.168.2.1
+dns domain atd.lab
+!
+spanning-tree mode none
+!
+no enable password
+no aaa root
+!
+interface Ethernet2
+   description P2P_LINK_TO_LEAF1_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.2/31
+!
+interface Ethernet3
+   description P2P_LINK_TO_LEAF2_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.6/31
+!
+interface Ethernet4
+   description P2P_LINK_TO_LEAF3_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.10/31
+!
+interface Ethernet5
+   description P2P_LINK_TO_LEAF4_Ethernet3
+   no shutdown
+   mtu 1500
+   no switchport
+   ip address 172.30.255.14/31
+!
+interface Loopback0
+   description EVPN_Overlay_Peering
+   no shutdown
+   ip address 192.0.255.2/32
+!
+interface Management1
+   description oob_management
+   no shutdown
+   ip address 192.168.0.11/24
+!
+ip routing
+!
+ip prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+   seq 10 permit 192.0.255.0/24 eq 32
+!
+ip route 0.0.0.0/0 192.168.0.1
+!
+route-map RM-CONN-2-BGP permit 10
+   match ip address prefix-list PL-LOOPBACKS-EVPN-OVERLAY
+!
+router bfd
+   multihop interval 1200 min-rx 1200 multiplier 3
+!
+router bgp 65001
+   router-id 192.0.255.2
+   no bgp default ipv4-unicast
+   distance bgp 20 200 200
+   graceful-restart restart-time 300
+   graceful-restart
+   maximum-paths 4 ecmp 4
+   neighbor EVPN-OVERLAY-PEERS peer group
+   neighbor EVPN-OVERLAY-PEERS next-hop-unchanged
+   neighbor EVPN-OVERLAY-PEERS update-source Loopback0
+   neighbor EVPN-OVERLAY-PEERS bfd
+   neighbor EVPN-OVERLAY-PEERS ebgp-multihop 3
+   neighbor EVPN-OVERLAY-PEERS password 7 q+VNViP5i4rVjW1cxFv2wA==
+   neighbor EVPN-OVERLAY-PEERS send-community
+   neighbor EVPN-OVERLAY-PEERS maximum-routes 0
+   neighbor IPv4-UNDERLAY-PEERS peer group
+   neighbor IPv4-UNDERLAY-PEERS password 7 AQQvKeimxJu+uGQ/yYvv9w==
+   neighbor IPv4-UNDERLAY-PEERS send-community
+   neighbor IPv4-UNDERLAY-PEERS maximum-routes 12000
+   neighbor 172.30.255.3 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.3 remote-as 65101
+   neighbor 172.30.255.3 description leaf1_Ethernet3
+   neighbor 172.30.255.7 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.7 remote-as 65101
+   neighbor 172.30.255.7 description leaf2_Ethernet3
+   neighbor 172.30.255.11 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.11 remote-as 65102
+   neighbor 172.30.255.11 description leaf3_Ethernet3
+   neighbor 172.30.255.15 peer group IPv4-UNDERLAY-PEERS
+   neighbor 172.30.255.15 remote-as 65102
+   neighbor 172.30.255.15 description leaf4_Ethernet3
+   neighbor 192.0.255.3 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.3 remote-as 65101
+   neighbor 192.0.255.3 description leaf1
+   neighbor 192.0.255.4 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.4 remote-as 65101
+   neighbor 192.0.255.4 description leaf2
+   neighbor 192.0.255.5 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.5 remote-as 65102
+   neighbor 192.0.255.5 description leaf3
+   neighbor 192.0.255.6 peer group EVPN-OVERLAY-PEERS
+   neighbor 192.0.255.6 remote-as 65102
+   neighbor 192.0.255.6 description leaf4
+   redistribute connected route-map RM-CONN-2-BGP
+   !
+   address-family evpn
+      neighbor EVPN-OVERLAY-PEERS activate
+   !
+   address-family ipv4
+      no neighbor EVPN-OVERLAY-PEERS activate
+      neighbor IPv4-UNDERLAY-PEERS activate
+!
+management api http-commands
+   protocol https
+   no shutdown
+   !
+   vrf default
+      no shutdown
+!
+end
diff --git a/docs/labs/lab06-provisioning/gen_builder.py b/docs/labs/lab06-provisioning/gen_builder.py
new file mode 100644
index 0000000..8cd389d
--- /dev/null
+++ b/docs/labs/lab06-provisioning/gen_builder.py
@@ -0,0 +1,63 @@
+# Copyright (c) 2020 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+container_id = clnt.api.get_container_by_name("TP_LEAFS")['key']
+builder_name = 'SYS_TelemetryBuilderV3'
+configletBuilderID = clnt.api.get_configlet_by_name(builder_name)['key']
+
+payload = {"previewValues":[{
+                            "fieldId":"vrf",
+                            "value":"red"}],
+            "configletBuilderId":configletBuilderID,
+            "netElementIds":[],
+            "pageType":"container",
+            "containerId":container_id,
+            "containerToId":"",
+            "mode":"assign"}
+
+preview = clnt.post('/configlet/configletBuilderPreview.do', data=payload)
+
+generated_names_list = []
+generated_keys_list = []
+
+for i in preview['data']:
+  generated_names_list.append(i['configlet']['name'])
+  generated_keys_list.append(i['configlet']['key'])
+
+clnt.get("/configlet/searchConfiglets.do?objectId={}&objectType=container&type=ignoreDraft&queryparam={}&startIndex=0&endIndex=22&sortByColumn=&sortOrder=".format(container_id, builder_name.lower()))
+
+tempData = {"data":[{
+    "info":"Configlet Assign: to container TP_LEAFS",
+    "infoPreview":"<b>Configlet Assign:</b> to container  TP_LEAFS",
+    "action":"associate",
+    "nodeType":"configlet",
+    "nodeId":"",
+    "toId":container_id,
+    "fromId":"","nodeName":"","fromName":"",
+    "toName":"TP_LEAFS",
+    "toIdType":"container",
+    "configletList":generated_keys_list,
+    "configletNamesList":generated_names_list,
+    "ignoreConfigletList":[],
+    "ignoreConfigletNamesList":[],
+    "configletBuilderList":[configletBuilderID],
+    "configletBuilderNamesList":[builder_name],
+    "ignoreConfigletBuilderList":[],
+    "ignoreConfigletBuilderNamesList":[]
+    }
+    ]
+    }
+
+clnt.api._add_temp_action(tempData)
+clnt.api._save_topology_v2([])
diff --git a/docs/labs/lab06-provisioning/mlag_issu.py b/docs/labs/lab06-provisioning/mlag_issu.py
new file mode 100644
index 0000000..307d418
--- /dev/null
+++ b/docs/labs/lab06-provisioning/mlag_issu.py
@@ -0,0 +1,220 @@
+#!/usr/bin/env python3
+#
+# python3 mlag_issu <upgrade inventory file> <MLAG peer to upgrade: 'peer1' or 'peer2'>"
+#
+# # Example of upgrade inventory file (YAML)
+# cvp_hosts:
+#     - 192.168.0.191
+#     - 192.168.0.192
+#     - 192.168.0.193
+# cvp_username: cvpadmin
+# target_eos_version: 4.25.4M
+# target_terminattr_version: 1.13.6
+# mlag_couples:
+#     - peer1: leaf101-1
+#       peer2: leaf101-2
+#     - peer1: leaf102-1
+#       peer2: leaf102-2
+#
+# Note: upgrades are performed in parallel
+
+import sys
+import time
+import string
+import random
+from getpass import getpass
+import requests
+from requests.packages.urllib3.exceptions import InsecureRequestWarning
+from datetime import datetime
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpLoginError, CvpApiError
+from pprint import pprint
+from operator import itemgetter
+import yaml
+
+class CvpDeviceUpgrader(object):
+    def __init__(self, hosts, username, password):
+        requests.packages.urllib3.disable_warnings(InsecureRequestWarning)
+        self.cvp_hosts = hosts
+        self.cvp_user = username
+        self.cvp_password = password
+        self.session = self._open_cvp_session()
+
+    def _open_cvp_session(self):
+        try:
+            client = CvpClient()
+            client.connect(
+                nodes=self.cvp_hosts,
+                username=self.cvp_user,
+                password=self.cvp_password,
+                request_timeout=300,
+                connect_timeout=30
+            )
+            return(client)
+        except CvpLoginError as e:
+            print(f"Cannot connect to CVP API: {e}")
+            exit()
+
+    def create_mlag_issu_change_control(self, taskIDs, deviceIDs):
+        cc_id = f"CC_{datetime.now().strftime('%Y%m%d_%H%M%S')}"
+        pre_upgrade_stage = {'stage': [{
+            'id': f"preU_{cc_id}",
+            'name': 'pre_upgrade',
+            'stage_row':[{'stage': [{
+                'id': ''.join(random.choice(string.ascii_letters + string.digits) for _ in range(9)),
+                'action': {
+                    'name': 'mlaghealthcheck',
+                    'timeout': 0,
+                    'args': {
+                        'DeviceID': device_id
+                    }
+                }
+            } for device_id in deviceIDs]}]
+        }]}
+        upgrade_stage = {'stage': [{
+            'id': f"U_{cc_id}",
+            'name': 'upgrade',
+            'stage_row': [{'stage': [{
+                'id': task_id,
+                'action': {
+                    'name': 'task',
+                    'args': {
+                        'TaskID': task_id
+                    }
+                }
+            } for task_id in taskIDs]}]
+        }]}
+        post_upgrade_stage = {'stage': [{
+            'id': f"postU_{cc_id}",
+            'name': 'post_upgrade',
+            'stage_row': [{'stage': [{
+                'id': ''.join(random.choice(string.ascii_letters + string.digits) for _ in range(9)),
+                'action': {
+                    'name': 'mlaghealthcheck',
+                    'timeout': 0,
+                    'args': {
+                        'DeviceID': device_id
+                    }
+                }
+            } for device_id in deviceIDs]}]
+        }]}
+        cc_data = {'config': {
+            'id': cc_id,
+            'name': f"Change Control {cc_id}",
+            'root_stage': {
+                'id': 'root',
+                'name': f"Change Control {cc_id} root",
+                'stage_row': [pre_upgrade_stage, upgrade_stage, post_upgrade_stage],
+            }
+        }}
+        try:
+            res = self.session.post('/api/v3/services/ccapi.ChangeControl/Update',
+                data=cc_data,
+                timeout=self.session.api.request_timeout
+            )
+        except Exception as e:
+            print(str(e))
+            return(None)
+        print(f"Change control {res[0]['id']} created at {res[0]['update_timestamp']}")
+        return(res[0]['id'])
+
+    def get_mlag_issu_change_control_logs(self, ccID, startTime):
+        end_time = int(time.time() * 1000)
+        cc_logs_data = {'category': 'ChangeControl',
+            'objectKey': ccID,
+            'dataSize': 15000,
+            'startTime': startTime,
+            'endTime': end_time
+        }
+        logs = self.session.post('/cvpservice/audit/getLogs.do',
+            data=cc_logs_data,
+            timeout=self.session.api.request_timeout
+        )
+        for log in sorted(logs['data'], key=itemgetter('dateTimeInLongFormat')):
+            if log['subObjectName'] and 'Command(s)' not in log['activity']:
+                log_date = datetime.fromtimestamp(log['dateTimeInLongFormat']/1000)
+                print(f"{log_date} {log['subObjectName']}: {log['activity']}")
+        return(end_time + 1)
+
+    def run_mlag_issu_change_control(self, ccID):
+        print(f"Automatic approval of change control {ccID}")
+        self.session.api.approve_change_control(ccID, datetime.utcnow().isoformat() + 'Z')
+        time.sleep(2)
+        print(f"Starting the execution of change control {ccID}")
+        start_time = int(time.time() * 1000)
+        self.session.api.execute_change_controls([ccID])
+        time.sleep(2)
+        cc_status = self.session.api.get_change_control_status(ccID)[0]['status']
+        start_time = self.get_mlag_issu_change_control_logs(ccID, start_time)
+        while cc_status['state'] == 'Running':
+            time.sleep(30)
+            cc_status = self.session.api.get_change_control_status(ccID)[0]['status']
+            start_time = self.get_mlag_issu_change_control_logs(ccID, start_time)
+        print(f"Change control {ccID} final status: {cc_status['state']}")
+        if cc_status['error']:
+            print(f"Change control {ccID} had the following errors: {cc_status['error']}")
+        else:
+            print(f"Change control {ccID} completed without errors")
+
+def main():
+    if len(sys.argv) != 3:
+        print(f"Usage: python3 {sys.argv[0]} <input file path> <MLAG peer to upgrade: peer1/peer2>")
+        exit()
+    try:
+        with open(sys.argv[1], 'r') as yf:
+            params = yaml.safe_load(yf)
+    except Exception as e:
+        print(e)
+        exit()
+    cvp_password = getpass(prompt=f"CVP password for user {params['cvp_username']}: ")
+    cvpdu = CvpDeviceUpgrader(
+        hosts=params['cvp_hosts'],
+        username=params['cvp_username'],
+        password=cvp_password
+    )
+    image_bundle = None
+    for bundle in cvpdu.session.api.get_image_bundles()['data']:
+        eos_match = False
+        terminattr_match = False
+        for img in bundle['imageIds']:
+            if params['target_eos_version'] in img:
+                eos_match = True
+            elif params['target_terminattr_version'] in img:
+                terminattr_match = True
+        if eos_match and terminattr_match:
+            image_bundle = bundle
+            break
+    if image_bundle is None:
+        print(f"Cannot find an image bundle with EOS {params['target_eos_version']} and TerminAttr {params['target_terminattr_version']}")
+        exit()
+    hostnames = [couple[sys.argv[2]] for couple in params['mlag_couples']]
+    devices_to_upgrade = list()
+    inventory = cvpdu.session.api.get_inventory()
+    for hostname in hostnames:
+        provisioned = False
+        for dev in inventory:
+            if dev['hostname'] == hostname:
+                provisioned = True
+                devices_to_upgrade.append(dev)
+                break
+        if not provisioned:
+            print(f"Device with hostname {hostname} is not provisioned in CVP")
+    if not devices_to_upgrade:
+        print('none of the mentioned devices is provisioned in CVP')
+        exit()
+    print(f"Devices to upgrade: {', '.join([dev['hostname'] for dev in devices_to_upgrade])}")
+    task_ids = list()
+    for device in devices_to_upgrade:
+        response = cvpdu.session.api.apply_image_to_device(image_bundle, device)['data']
+        if response['status'] == 'success':
+            task_ids.extend(response['taskIds'])
+    device_ids = [device['serialNumber'] for device in devices_to_upgrade]
+    cc_id = cvpdu.create_mlag_issu_change_control(task_ids, device_ids)
+    if cc_id is None:
+        print('Failed to create the MLAG ISSU change control')
+        exit()
+    time.sleep(2)
+    cvpdu.run_mlag_issu_change_control(cc_id)
+
+if __name__ == '__main__':
+    main()
diff --git a/docs/labs/lab06-provisioning/move_device.py b/docs/labs/lab06-provisioning/move_device.py
new file mode 100644
index 0000000..5257f79
--- /dev/null
+++ b/docs/labs/lab06-provisioning/move_device.py
@@ -0,0 +1,24 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='',password='',api_token=token)
+
+container = clnt.api.get_container_by_name('TP_LEAFS') # container object
+
+app_name = "my app" # can be any string
+
+device = {"key":"00:1c:73:c5:4c:87", "fqdn":"co633.ire.aristanetworks.com"}
+
+move_device_to_container(app_name, device, container)
diff --git a/docs/labs/lab06-provisioning/vc_task_retrigger.py b/docs/labs/lab06-provisioning/vc_task_retrigger.py
new file mode 100644
index 0000000..b5586ee
--- /dev/null
+++ b/docs/labs/lab06-provisioning/vc_task_retrigger.py
@@ -0,0 +1,115 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+# Example on how to re-trigger task creation if a config push task was previously
+# cancelled and the device is still config out of sync
+import argparse
+import ssl
+import sys
+from pkg_resources import parse_version
+from getpass import getpass
+from cvprac.cvp_client import CvpClient
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+
+if ((sys.version_info.major == 3) or
+        (sys.version_info.major == 2 and sys.version_info.minor == 7 and
+         sys.version_info.micro >= 5)):
+    ssl._create_default_https_context = ssl._create_unverified_context
+
+
+def main():
+        
+    compliance = {"0001": "Config is out of sync",
+        "0003": "Config & image out of sync",
+        "0004": "Config, Image and Device time are in sync",
+        "0005": "Device is not reachable",
+        "0008": "Config, Image and Extensions are out of sync",
+        "0009": "Config and Extensions are out of sync",
+        "0012": "Config, Image, Extension and Device time are out of sync",
+        "0013": "Config, Image and Device time are out of sync",
+        "0014": "Config, Extensions and Device time are out of sync",
+        "0016": "Config and Device time are out of sync"
+    }
+    # Create connection to CloudVision
+    clnt = CvpClient()
+
+    parser = argparse.ArgumentParser(
+        description='Script to recreate a task, if a previous config push was cancelled')
+    parser.add_argument('-u', '--username', default='username')
+    parser.add_argument('-p', '--password', default=None)
+    parser.add_argument('-c', '--cvpserver', action='append')
+    parser.add_argument('-f', '--filter', action='append', default=None)
+    args = parser.parse_args()
+
+    if args.password is None:
+        args.password = getpass()
+
+    for cvpserver in args.cvpserver:
+        print("Connecting to %s" % cvpserver)
+        try:
+            clnt.connect(nodes=[cvpserver], username=args.username, password=args.password)
+        except Exception as e:
+            print("Unable to connect to CVP: %s" % str(e))
+
+        # Get the current CVP version
+        cvp_release = clnt.api.get_cvp_info()['version']
+        if parse_version(cvp_release) < parse_version('2020.3.0'):
+            # For older CVP, we manually trigger a compliance check
+            try:
+                clnt.api.check_compliance('root', 'container')
+            except:
+                # Bad practice, but the check compliance applied to a container can't actually work
+                # since the complianceIndication  key doesn't exist on the container level
+                pass
+        else:
+            # with continuous compliance checks, triggering the check is no longer required
+            pass
+
+        device_filters = []
+        if args.filter is not None:
+            for entry in args.filter:
+                device_filters.extend(entry.split(','))
+
+        # Get inventory
+        print("Collecting inventory...")
+        devices = clnt.api.get_inventory()
+        print("%d devices in inventory" % len(devices) )
+
+        for switch in devices:
+            if (switch['status'] == 'Registered' and
+                    switch['parentContainerId'] != 'undefined_container'):
+
+                if len(device_filters) > 0:
+                    # iterate over device filters, and update task for
+                    # any devices not in compliance
+                    
+                    for filter_term in device_filters:
+                        print("Checking device: %s" % switch['hostname'])
+                        if filter_term in switch['hostname']:
+                            # generate configlet list
+                            cl = clnt.api.get_configlets_by_device_id(switch['systemMacAddress'])
+                            # generate a task if config is out of sync
+                            if switch['complianceCode'] in compliance.keys():
+                                print(clnt.api.apply_configlets_to_device("", switch, cl))
+                            else:
+                                print("%s is compliant, nothing to do" % switch['hostname'])
+                        else:
+                            print("Skipping %s due to filter" % switch['hostname'])
+                else:
+                    print("Checking device: %s" % switch['hostname'])
+                    cl = clnt.api.get_configlets_by_device_id(switch['systemMacAddress'])
+                    # generate a task if config is out of sync
+                    if switch['complianceCode'] in compliance.keys():
+                        print(clnt.api.apply_configlets_to_device("", switch, cl))
+
+            else:
+                print("Skipping %s, device is unregistered for provisioning" % switch['hostname'])
+
+    return 0
+
+
+if __name__ == "__main__":
+    main()
diff --git a/docs/labs/lab07-aaa/aaa_users.csv b/docs/labs/lab07-aaa/aaa_users.csv
new file mode 100644
index 0000000..14b3706
--- /dev/null
+++ b/docs/labs/lab07-aaa/aaa_users.csv
@@ -0,0 +1,5 @@
+username,first_name,last_name,email,user_type,role,status

+alice,,,alice@abc.xyz,SSO,network-admin,Enabled

+bob,,,bob@abc.xyz,SSO,network-admin,Enabled

+jane,Jane,Smith,jane@abc.xyz,SSO,network-admin,Enabled

+john,John,Smith,john@abc.xyz,SSO,network-admin,Enabled
\ No newline at end of file
diff --git a/docs/labs/lab07-aaa/add_new_user_cvaas.py b/docs/labs/lab07-aaa/add_new_user_cvaas.py
new file mode 100644
index 0000000..af2d48e
--- /dev/null
+++ b/docs/labs/lab07-aaa/add_new_user_cvaas.py
@@ -0,0 +1,32 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from cvprac.cvp_client import CvpClient
+
+# Create connection to CloudVision using Service Account token
+with open("cvaas.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['www.arista.io'], username='', password='', is_cvaas=True, api_token=token)
+
+username = "john"
+password = ""
+role = "network-admin"
+status = "Enabled"
+first_name = "John"
+last_name = "Smith"
+email = "john.smith@abc.xyz"
+utype = "SSO"
+
+try:
+    clnt.api.add_user(username,password,role,status,first_name,last_name,email,utype)
+except CvpApiError as e:
+    print(e)
diff --git a/docs/labs/lab07-aaa/add_new_user_onprem.py b/docs/labs/lab07-aaa/add_new_user_onprem.py
new file mode 100644
index 0000000..218c9fc
--- /dev/null
+++ b/docs/labs/lab07-aaa/add_new_user_onprem.py
@@ -0,0 +1,29 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from getpass import getpass
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+username = "cvpuser2"
+password = getpass()
+role = "network-admin"
+status = "Enabled"
+first_name = "Cloud"
+last_name = "Vision"
+email = "cvp@arista.com"
+utype = "TACACS"
+
+try:
+    clnt.api.add_user(username,password,role,status,first_name,last_name,email,utype)
+except CvpApiError as e:
+    print(e)
diff --git a/docs/labs/lab07-aaa/add_users_from_csv_cvaas.py b/docs/labs/lab07-aaa/add_users_from_csv_cvaas.py
new file mode 100644
index 0000000..c5cdda5
--- /dev/null
+++ b/docs/labs/lab07-aaa/add_users_from_csv_cvaas.py
@@ -0,0 +1,29 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from cvprac.cvp_client import CvpClient
+import csv
+
+# Create connection to CloudVision using Service Account token
+with open("cvaas.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['www.arista.io'], username='', password='', is_cvaas=True, api_token=token)
+
+
+with open("aaa_users.csv") as csvfile:
+    for i in csv.DictReader(csvfile):
+        data = dict(i)
+        try:
+            clnt.api.add_user(data['username'], "", data['role'], data['status'], data['first_name'], data['last_name'], data['email'], data['user_type'])
+        except CvpApiError as e:
+            print(e)
+        print ("Adding user {} to CVaaS".format(data['username']))
diff --git a/docs/labs/lab07-aaa/create_svc_account.py b/docs/labs/lab07-aaa/create_svc_account.py
new file mode 100644
index 0000000..7f0e55e
--- /dev/null
+++ b/docs/labs/lab07-aaa/create_svc_account.py
@@ -0,0 +1,20 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+username = "cvprac2"
+description = "test cvprac"
+roles = ["network-admin", "clouddeploy"] # both role names and role IDs are supported
+status = 1 # 1 is equivalent to "ACCOUNT_STATUS_ENABLED"
+clnt.api.svc_account_set(username, description, roles, status)
diff --git a/docs/labs/lab07-aaa/create_svc_account_token.py b/docs/labs/lab07-aaa/create_svc_account_token.py
new file mode 100644
index 0000000..4be8185
--- /dev/null
+++ b/docs/labs/lab07-aaa/create_svc_account_token.py
@@ -0,0 +1,23 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+username = "cvprac2"
+duration = "31536000s" # 1 year validity
+description = "test cvprac"
+svc_token = clnt.api.svc_account_token_set(username, duration, description)
+
+# Write the token to file in <username>.tok format
+with open(svc_token[0]['value']['user'] + ".tok", "w") as f:
+    f.write(svc_token[0]['value']['token'])
diff --git a/docs/labs/lab07-aaa/create_terminattr_tokens.py b/docs/labs/lab07-aaa/create_terminattr_tokens.py
new file mode 100644
index 0000000..d874913
--- /dev/null
+++ b/docs/labs/lab07-aaa/create_terminattr_tokens.py
@@ -0,0 +1,32 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+#
+# Example script to generate the TerminAttr token via REST API from CVaaS and CV on-prem
+# and save them to a file
+
+from cvprac.cvp_client import CvpClient
+from pprint import pprint as pp
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Reading the service account token from a file
+with open("cvaas.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['www.arista.io'], username='',password='',is_cvaas=True, api_token=token)
+
+terminattr_token = clnt.api.create_enroll_token('720h')
+with open('cv-onboarding-token', 'w') as f:
+    f.write(terminattr_token[0]['enrollmentToken']['token'])
+
+primary = CvpClient()
+primary.connect(nodes=['cvp1'], username='username',password='password')
+
+terminattr_token = primary.api.create_enroll_token('720h')
+
+with open('token', 'w') as f:
+    f.write(terminattr_token['data'])
diff --git a/docs/labs/lab07-aaa/cvaas.tok b/docs/labs/lab07-aaa/cvaas.tok
new file mode 100644
index 0000000..9d0234c
--- /dev/null
+++ b/docs/labs/lab07-aaa/cvaas.tok
@@ -0,0 +1 @@
+<copy service account token here>
\ No newline at end of file
diff --git a/docs/labs/lab07-aaa/delete_all_expired_svc_account_tokens.py b/docs/labs/lab07-aaa/delete_all_expired_svc_account_tokens.py
new file mode 100644
index 0000000..68e82a9
--- /dev/null
+++ b/docs/labs/lab07-aaa/delete_all_expired_svc_account_tokens.py
@@ -0,0 +1,16 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+clnt.api.svc_account_delete_expired_tokens()
diff --git a/docs/labs/lab07-aaa/delete_svc_account.py b/docs/labs/lab07-aaa/delete_svc_account.py
new file mode 100644
index 0000000..a6f7854
--- /dev/null
+++ b/docs/labs/lab07-aaa/delete_svc_account.py
@@ -0,0 +1,17 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+username = "cvprac2"
+clnt.api.svc_account_delete(username)
diff --git a/docs/labs/lab07-aaa/delete_svc_account_created_by_user.py b/docs/labs/lab07-aaa/delete_svc_account_created_by_user.py
new file mode 100644
index 0000000..b8f4045
--- /dev/null
+++ b/docs/labs/lab07-aaa/delete_svc_account_created_by_user.py
@@ -0,0 +1,22 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+svc_accounts = clnt.api.svc_account_get_all()
+created_by = 'john.smith'
+
+# Delete service accounts created by user john.smith
+for account in svc_accounts:
+    if account['value']['created_by'] == created_by:
+        clnt.api.svc_account_delete(account['value']['key']['name'])
diff --git a/docs/labs/lab07-aaa/get_user_info.py b/docs/labs/lab07-aaa/get_user_info.py
new file mode 100644
index 0000000..5e5a193
--- /dev/null
+++ b/docs/labs/lab07-aaa/get_user_info.py
@@ -0,0 +1,20 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+from cvprac.cvp_client import CvpClient
+
+with open("cvaas.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['www.arista.io'], username='', password='', is_cvaas=True, api_token=token)
+
+user_info = clnt.api.get_user('kishore')
+print (user_info)
diff --git a/docs/labs/lab07-aaa/svc_account_misc.py b/docs/labs/lab07-aaa/svc_account_misc.py
new file mode 100644
index 0000000..d3eccca
--- /dev/null
+++ b/docs/labs/lab07-aaa/svc_account_misc.py
@@ -0,0 +1,34 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from cvprac.cvp_client_errors import CvpApiError
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Create connection to CloudVision using user/password (on-prem only)
+clnt = CvpClient()
+clnt.connect(['cvp1'],'username', 'password')
+
+# Get all service accounts states
+
+accounts = clnt.api.svc_account_get_all()
+
+# Get specific service account state
+
+account = clnt.api.svc_account_get_one("cvprac2")
+
+# Get all service account token states
+
+tokens = clnt.api.svc_account_token_get_all()
+
+# Get specific token state
+
+token = clnt.api.svc_account_token_get_one("9bfb39ff892c81d6ac9f25ff95d0389719595feb")
+
+# Delete a service account token
+
+clnt.api.svc_account_token_delete("9bfb39ff892c81d6ac9f25ff95d0389719595feb")
diff --git a/docs/labs/lab08-resource-apis/resource_cvprac.py b/docs/labs/lab08-resource-apis/resource_cvprac.py
new file mode 100644
index 0000000..e454fc9
--- /dev/null
+++ b/docs/labs/lab08-resource-apis/resource_cvprac.py
@@ -0,0 +1,187 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+from cvprac.cvp_client import CvpClient
+from pprint import pprint as pp
+import ssl
+ssl._create_default_https_context = ssl._create_unverified_context
+import requests.packages.urllib3
+requests.packages.urllib3.disable_warnings()
+
+# Reading the service account token from a file
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='',password='',api_token=token)
+
+def get_events_all(client):
+    ''' Get All events '''
+    event_url = '/api/resources/event/v1/Event/all'
+    response = client.get(event_url)
+    return response['data']
+
+def get_event(client, key, ts):
+    event_url = '/api/resources/event/v1/Event?'
+    url = event_url + 'key.key=' + key + "&key.timestamp=" + ts
+    response = client.get(url)
+    return response
+
+def get_events_t1_t2(client, t1, t2):
+    event_url = '/api/resources/event/v1/Event/all?'
+    url = event_url + 'time.start=' + t1 + "&time.end=" + t2
+    response = client.get(url)
+    return response['data']
+
+def get_events_by_severity(client, severity):
+    payload = {"partialEqFilter": [{"severity": severity }]}
+    event_url = '/api/resources/event/v1/Event/all'
+    response = client.post(event_url, data=payload)
+    if 'data' in response.keys():
+        return response['data']
+    else:
+        return response
+
+def get_events_by_type(client, etype):
+    payload = {"partialEqFilter": [{"eventType": etype }]}
+    event_url = '/api/resources/event/v1/Event/all'
+    response = client.post(event_url, data=payload)
+    if 'data' in response.keys():
+        return response['data']
+    else:
+        return response
+
+def get_active_devices(client):
+    ''' Get active devices '''
+    dev_url = '/api/resources/inventory/v1/Device/all'
+    devices_data = client.get(dev_url)
+    devices = []
+    for device in devices_data['data']:
+        try:
+            if device['result']['value']['streamingStatus'] == "STREAMING_STATUS_ACTIVE":
+                devices.append(device['result']['value']['hostname'])
+        # pass on archived datasets
+        except KeyError as e:
+            continue
+    return devices
+
+def get_all_device_tags(client):
+    tag_url = '/api/resources/tag/v1/DeviceTag/all'
+    tag_data = client.get(tag_url)
+    tags = []
+    for tag in tag_data['data']:
+        tags.append({tag['result']['value']['key']['label']:tag['result']['value']['key']['value']})
+    return tags
+
+def get_all_interface_tags(client):
+    tag_url = '/api/resources/tag/v1/InterfaceTagAssignmentConfig/all'
+    tags = client.get(tag_url)
+    return tags['data']
+
+def filter_interface_tag(client, dId=None, ifId=None, label=None, value=None):
+    tag_url = '/api/resources/tag/v1/InterfaceTagAssignmentConfig/all'
+    payload = {
+                "partialEqFilter": [
+                    {"key": {"deviceId": dId, "interfaceId": ifId, "label": label, "value": value}}
+                ]
+            }
+    response = client.post(tag_url, data=payload)
+    return response
+
+def create_itag(client, label, value):
+    tag_url = '/api/resources/tag/v1/InterfaceTagConfig'
+    payload = {"key":{"label":label,"value":value}}
+    response = client.post(tag_url, data=payload)
+    return response
+
+def assign_itag(client, dId, ifId, label, value):
+    tag_url = '/api/resources/tag/v1/InterfaceTagAssignmentConfig'
+    payload = {"key":{"label":label, "value":value, "deviceId": dId, "interfaceId": ifId}}
+    response = client.post(tag_url, data=payload)
+    return response
+
+def create_dtag(client, label, value):
+    tag_url = '/api/resources/tag/v1/DeviceTagConfig'
+    payload = {"key":{"label":label,"value":value}}
+    response = client.post(tag_url, data=payload)
+    return response
+
+def assign_dtag(client, dId, label, value):
+    tag_url = '/api/resources/tag/v1/DeviceTagAssignmentConfig'
+    payload = {"key":{"label":label, "value":value, "deviceId": dId}}
+    response = client.post(tag_url, data=payload)
+    return response
+
+### Uncomment the below functions/print statement to test
+
+# ### Get all active events
+# print ('=== All active events ===')
+# cvpevents = get_events_all(clnt)
+# for event in cvpevents:
+#     print(event)
+
+# ### Get a specific event
+# key = "6098ae39e4c8a9d7"
+# ts ="2021-04-06T21:53:00Z"
+# get_event(clnt, key, ts)
+
+# ### Get events between two dates
+# t1 = "2021-04-06T09:00:00Z"
+# t2 = "2021-04-06T14:00:00Z"
+# events = get_events_t1_t2(clnt, t1, t2)
+# print(f"=== Events between {t1} and {t2} ===")
+# pp(events)
+
+# ### Get all INFO severity events ###
+# # EVENT_SEVERITY_UNSPECIFIED = 0
+# # EVENT_SEVERITY_INFO =	1
+# # EVENT_SEVERITY_WARNING = 2
+# # EVENT_SEVERITY_ERROR = 3
+# # EVENT_SEVERITY_CRITICAL =	4
+# ####################################
+
+# severity = 1 ## Severity INFO
+# info = get_events_by_severity(clnt, severity)
+# print('=== Get all INFO severity events ===')
+# pp(info)
+
+# ### Get specific event types
+
+# etype = "LOW_DEVICE_DISK_SPACE"
+# event = get_events_by_type(clnt, etype)
+# print('=== Get all Low Disk Space events ===')
+# pp(event)
+
+# ### Get the inventory
+# print ('=== Inventory ===')
+# print(get_active_devices(clnt))
+
+# ### Get all devie tags
+# print('=== Device Tags ===' )
+# for tag in get_all_device_tags(clnt):
+#     print (tag)
+
+# ### Get all interface tag assignments
+# print(get_all_interface_tags(clnt))
+
+# ### Get all interfaces that have a tag with a specific value on a device
+# print(filter_interface_tag(clnt, dId="JPE14070534", value="speed40Gbps"))
+
+# ### Get all tags for an interface of a device
+# print(filter_interface_tag(clnt, dId="JPE14070534", ifId="Ethernet1"))
+
+# ### Get all interfaces that have a specific tag assigned
+# print(filter_interface_tag(clnt, dId="JPE14070534", label="lldp_hostname"))
+
+# ### Create an interface tag
+# create_itag(clnt, "lldp_chassis", "50:08:00:0d:00:48")
+
+# ### Assign an interface tag
+# assign_itag(clnt, "JPE14070534", "Ethernet4", "lldp_chassis", "50:08:00:0d:00:38")
+
+# ### Create a device tag
+# create_dtag(clnt, "topology_hint_pod", "ire-pod11")
+
+# ### Assign an interface tag
+# assign_dtag(clnt, "JPE14070534", "topology_hint_pod", "ire-pod11" )
diff --git a/docs/labs/lab08-resource-apis/topology_tag_assignment.py b/docs/labs/lab08-resource-apis/topology_tag_assignment.py
new file mode 100644
index 0000000..973e9f7
--- /dev/null
+++ b/docs/labs/lab08-resource-apis/topology_tag_assignment.py
@@ -0,0 +1,106 @@
+# Copyright (c) 2021 Arista Networks, Inc.
+# Use of this source code is governed by the Apache License 2.0
+# that can be found in the COPYING file.
+
+# In this example we are going to assign topology tags using the tags.v2 workspace aware API
+# More details on tag.v2 can be found at https://aristanetworks.github.io/cloudvision-apis/models/tag.v2/
+# NOTE: Tag.v2 can be used for assigning both device and interface tags (studios, topology, etc) and it's not
+# limited to topology tags only. 
+# The following are some of the built-in tags that can be used to modify the Topology rendering:
+# topology_hint_type: < core | edge | endpoint | management | leaf | spine  >
+# topology_hint_rack: < rack name as string >
+# topology_hint_pod: < pod name as string >
+# topology_hint_datacenter: < datacenter name as string >
+# topology_hint_building: < building name as string >
+# topology_hint_floor: < floor name as string >
+# topology_network_type: < datacenter | campus | cloud >
+
+from cvprac.cvp_client import CvpClient
+import uuid
+from datetime import datetime
+
+# Reading the service account token from a file
+with open("token.tok") as f:
+    token = f.read().strip('\n')
+
+# Create connection to CloudVision
+clnt = CvpClient()
+clnt.connect(nodes=['cvp1'], username='',password='',api_token=token)
+
+tags_common = [{"key": "topology_hint_pod", "value": "tp-avd-pod1"},
+               {"key": "topology_hint_datacenter", "value": "tp-avd-dc1"}]
+tags_leaf1 = [{"key": "topology_hint_rack", "value": "tp-avd-leafs1"},
+              {"key": "topology_hint_type", "value": "leaf"}]
+tags_leaf2 = [{"key": "topology_hint_rack", "value": "tp-avd-leafs2"},
+              {"key": "topology_hint_type", "value": "leaf"}]
+tags_spines = [{"key": "topology_hint_rack", "value": "tp-avd-spines"},
+               {"key": "topology_hint_type", "value": "spine"}]
+
+# Create workspace
+display_name = f"Change_{datetime.now().strftime('%Y%m%d_%H%M%S')}"
+workspace_id = str(uuid.uuid4())
+clnt.api.workspace_config(workspace_id,display_name)
+
+### Create tags
+element_type = "ELEMENT_TYPE_DEVICE"
+
+for tag in tags_common+tags_leaf1+tags_leaf2+tags_spines:
+    tag_label = tag['key']
+    tag_value = tag['value']
+    clnt.api.tag_config(element_type, workspace_id, tag_label, tag_value)
+
+### Assign tags
+devices = {"leafs1":["BAD032986065E8DC14CBB6472EC314A6","0123F2E4462997EB155B7C50EC148767"],
+		   "leafs2":["8520AF39790A4EC959550166DC5DEADE", "6323DA7D2B542B5D09630F87351BEA41"],
+		   "spines":["CD0EADBEEA126915EA78E0FB4DC776CA", "2568DB4A33177968A78C4FD5A8232159"]}
+
+for tag in tags_common+tags_leaf1:
+    tag_label = tag['key']
+    tag_value = tag['value']
+    interface_id = ''
+    for leaf in devices['leafs1']:
+        device_id = leaf
+        clnt.api.tag_assignment_config(element_type, workspace_id, tag_label, tag_value, device_id, interface_id)
+for tag in tags_common+tags_leaf2:
+    tag_label = tag['key']
+    tag_value = tag['value']
+    interface_id = ''
+    for leaf in devices['leafs2']:
+        device_id = leaf
+        clnt.api.tag_assignment_config(element_type, workspace_id, tag_label, tag_value, device_id, interface_id)
+for tag in tags_common+tags_spines:
+    tag_label = tag['key']
+    tag_value = tag['value']
+    interface_id = ''
+    for spine in devices['spines']:
+        device_id = spine
+        clnt.api.tag_assignment_config(element_type, workspace_id, tag_label, tag_value, device_id, interface_id)
+
+### Start build
+request = 'REQUEST_START_BUILD'
+request_id = 'b1'
+description='testing cvprac build'
+clnt.api.workspace_config(workspace_id=workspace_id, display_name=display_name, 
+                                     description=description, request=request, request_id=request_id)
+
+### Check workspace build status and proceed only after it finishes building
+b = 0
+while b == 0:
+    build_id = request_id
+    # Requesting for the build status too fast might fail if the build start didn't finish creating
+    # the build with the request_id/build_id
+    while True:
+        try:
+            request = clnt.api.workspace_build_status(workspace_id, build_id)
+            break
+        except Exception as e:
+            continue
+    if request['value']['state'] == 'BUILD_STATE_SUCCESS':
+        b = b+1
+    else:
+        continue
+
+### Submit workspace
+request = 'REQUEST_SUBMIT'
+request_id = 's1'
+clnt.api.workspace_config(workspace_id=workspace_id,display_name=display_name,description=description,request=request,request_id=request_id)
diff --git a/docs/labs/static/serviceaccount1.png b/docs/labs/static/serviceaccount1.png
new file mode 100644
index 0000000..b6de68b
--- /dev/null
+++ b/docs/labs/static/serviceaccount1.png
diff --git a/docs/labs/static/serviceaccount2.png b/docs/labs/static/serviceaccount2.png
new file mode 100644
index 0000000..3b49542
--- /dev/null
+++ b/docs/labs/static/serviceaccount2.png
diff --git a/docs/labs/static/serviceaccount3.png b/docs/labs/static/serviceaccount3.png
new file mode 100644
index 0000000..2eca99a
--- /dev/null
+++ b/docs/labs/static/serviceaccount3.png
diff --git a/docs/release-notes-0.7.0.rst b/docs/release-notes-0.7.0.rst
new file mode 100644
index 0000000..3d1a26d
--- /dev/null
+++ b/docs/release-notes-0.7.0.rst
@@ -0,0 +1,25 @@
+######
+v0.7.0
+######
+
+2017-03-30
+
+New Modules
+^^^^^^^^^^^
+
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add image upgrade feature to api. (`19 <https://github.com/aristanetworks/cvprac/pull/19>`_) [`mharista <https://github.com/mharista>`_]
+    Added functions for applying image bundles to devices and adding or removing image bundles from containers. Also added container and image information gathering functions.
+* Add deploy_device functionality (`23 <https://github.com/aristanetworks/cvprac/pull/23>`_) [`mharista <https://github.com/mharista>`_]
+    Added function deploy_device and helper functions for automated deploying of a device from the a container (for example the Undefined container), to the proper end container. Applies any necessary configlets and optionally an image in the process. Also added new functionality for getting information related to containers and devices (for example getting a devices parent container, or a list of devices in a container). Made task creation optional for calls that would normally create a task. Default behavior is to create the task, but if the user wants to take multiple actions for execution in one task (as done in deploy_device) the user can tell the function not to create the task (essentially what this does is delay the call to saveTopology while adding multiple tempActions).
+* Add ability for user to configure log level. (`26 <https://github.com/aristanetworks/cvprac/pull/26>`_) [`mharista <https://github.com/mharista>`_]
+    Logging level can now we set during client initialization or changed at any time using a client setter.
+
+Fixed
+^^^^^
+
+* Make REST call to addTempAction before saveTopology. (`17 <https://github.com/aristanetworks/cvprac/issues/17>`_)
+    New CVP version requires calls to addTempAction before saveTopology or the save will not do anything. In the CVP UI creating a container is the equivalent of addTempAction and then clicking save at the bottom to confirm the container remains is the equivalent of saveTopology.
diff --git a/docs/release-notes-0.8.0.rst b/docs/release-notes-0.8.0.rst
new file mode 100644
index 0000000..1fddc1b
--- /dev/null
+++ b/docs/release-notes-0.8.0.rst
@@ -0,0 +1,28 @@
+######
+v0.8.0
+######
+
+2017-09-12
+
+New Modules
+^^^^^^^^^^^
+
+* Added/updated API function for validating a devices config. (`27 <https://github.com/aristanetworks/cvprac/pull/27>`_) (`updates <https://github.com/aristanetworks/cvprac/commit/c5466163a5d79ffb4cd0ee18d1e47371b7264c35>`_)
+    New function in API that will return True if the passed in device is running a valid config. Will return False and log error messages if the device validation check fails.
+* Add Jenkins integration and pre-commit hook. (`31 <https://github.com/aristanetworks/cvprac/pull/31>`_) [`jerearista <https://github.com/jerearista>`_]
+* Update client protocol default to https with http fallback. (`33 <https://github.com/aristanetworks/cvprac/pull/33>`_) [`mharista <https://github.com/mharista>`_]
+    With new versions of CVP only supporting https we have changed the default protocol used to https. The protocol parameter passed to the client is no longer used. The client connect will attempt to use https with a fallback of http if it fails to connect via https. A user can force https with no http fallback by providing a path to a valid certificate to the connect method for new parameter cert. Default https connection with no cert provided will use unverified https requests.
+
+Enhancements
+^^^^^^^^^^^^
+
+* Added property to CvpClient that stores last node a request was made to. (`34 <https://github.com/aristanetworks/cvprac/pull/34>`_) [`mharista <https://github.com/mharista>`_]
+    New last_used_node function will return the last CVP node a request was sent to.
+
+Fixed
+^^^^^
+
+* Fixed functions for removing images from devices and containers. (`33 <https://github.com/aristanetworks/cvprac/pull/33>`_) [`mharista <https://github.com/mharista>`_]
+    Bugs in the code for removing images was causing system tests to fail due to the system under tests to get out of compliance.
+* Removed non-default python logging module. (`38 <https://github.com/aristanetworks/cvprac/pull/38>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+    Using default logging built into python. The non-default module was causing problems in some cases when installing with pip.
diff --git a/docs/release-notes-0.9.0.rst b/docs/release-notes-0.9.0.rst
new file mode 100644
index 0000000..3f8dd5c
--- /dev/null
+++ b/docs/release-notes-0.9.0.rst
@@ -0,0 +1,32 @@
+######
+v0.9.0
+######
+
+2018-04-17
+
+New Modules
+^^^^^^^^^^^
+
+* Added Inventory handling methods. (`51 <https://github.com/aristanetworks/cvprac/pull/51>`_) [`cheynearista <https://github.com/cheynearista>`_]
+    add_device_to_inventory, retry_add_to_inventory, delete_device, delete_devices, get_non_connected_device_count, save_inventory.
+* Add basic logout api function. (`d52f4a0 <https://github.com/aristanetworks/cvprac/commit/d52f4a07c49e358d86ca0701d5885cddfd231f98>`_) [`mharista <https://github.com/mharista>`_]
+    Added for future enhanced handling of session logout.
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add ability to provide a query parameter to get_inventory. (`423d555 <https://github.com/aristanetworks/cvprac/commit/423d555adfd0a015ee96540fdc1048a0e26c5c84>`_) [`mharista <https://github.com/mharista>`_]
+    Query string can be used as a match to filter returned inventory list. For example you can filter on a specific version of EOS.
+* Add contact info to docs. (`693d3ba <https://github.com/aristanetworks/cvprac/commit/693d3ba57caa72bb326adbae98b64dba8bc0f104>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fix get_device_by_name to return only the device with the given FQDN. (`41 <https://github.com/aristanetworks/cvprac/pull/41>`_)
+    This was returning all devices that contained the provided name as a string in their data. Now verify the FQDN matches the name before returning.
+* Fix get_devices_in_container to only return devices in the specified container. (`2b26d0c <https://github.com/aristanetworks/cvprac/commit/2b26d0cff773ff687e0d7c0460dd64c9927f2383>`_) [`mharista <https://github.com/mharista>`_]
+    This was previously returning all devices from get_inventory that matched a query string anywhere in their data instead of specific to the parent container.
+* Remove 'id': 1 from data structs in requests. (`52 <https://github.com/aristanetworks/cvprac/pull/52>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+    This key:value being included int he request data causes an error in 2018 versions of CVP.
+* Add fix for special characters in object names in url. (`53 <https://github.com/aristanetworks/cvprac/pull/53>`_) [`mharista <https://github.com/mharista>`_]
+    Special characters in request parameters (for example a container name Rack2+_DC11) would cause unexpected results. This are now properly escaped for HTTP.
diff --git a/docs/release-notes-1.0.0.rst b/docs/release-notes-1.0.0.rst
new file mode 100644
index 0000000..3f4e958
--- /dev/null
+++ b/docs/release-notes-1.0.0.rst
@@ -0,0 +1,41 @@
+######
+v1.0.0
+######
+
+2018-12-05
+
+New Modules
+^^^^^^^^^^^
+
+* Added method for capturing container level snapshot. (`57 <https://github.com/aristanetworks/cvprac/pull/57>`_) [`brokenpackets <https://github.com/brokenpackets>`_]
+    capture_container_level_snapshot.
+* Added method for getting event by ID. (`58 <https://github.com/aristanetworks/cvprac/pull/58>`_) [`brokenpackets <https://github.com/brokenpackets>`_]
+    get_event_by_id.
+* Added method for getting device running config. (`3b97ba3 <https://github.com/aristanetworks/cvprac/commit/3b97ba3533ef0783d1a3ef6e5e060949245f4715>`_) [`mharista <https://github.com/mharista>`_]
+    get_device_configuration.
+* Added methods for change control functionality. (`7e49447 <https://github.com/aristanetworks/cvprac/commit/7e494473cf519a506d0445b4bf8f726fe353b753>`_) [`mharista <https://github.com/mharista>`_]
+    get_change_controls, change_control_available_tasks, create_change_control.
+* Added method for adding notes to change control. (`e21c0ae <https://github.com/aristanetworks/cvprac/commit/e21c0aeb7d3a6141fc2ab3876906a201ddba3dcd>`_) [`mharista <https://github.com/mharista>`_]
+    add_notes_to_change_control.
+* Add assorted methods. (`68 <https://github.com/aristanetworks/cvprac/pull/68>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+    get_configlets, get_configlets_by_container_id, get_configlets_by_netelement_id, add_note_to_configlet, get_all_temp_actions,
+    get_applied_devices, get_applied_containers, filter_topology, get_default_snapshot_template, capture_container_level_snapshot,
+    add_image, save_image_bundle, update_image_bundle, execute_change_control, get_change_control_info.
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add flag for create_task to deploy_device. (`59 <https://github.com/aristanetworks/cvprac/pull/59>`_) [`brokenpackets <https://github.com/brokenpackets>`_]
+    Flag defaults to True and allows user to decide if they want tasks automatically created when calling deploy_device.
+* Allow waiting for task IDs when updating configlets. (`67 <https://github.com/aristanetworks/cvprac/pull/67>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+    Flag for waitForTaskIds parameter added to update_configlet method. Defaults to False.
+* Update appropriate APIs and tests to support CVP 2018.2. (`ad7b576 <https://github.com/aristanetworks/cvprac/commit/ad7b576758f6c8aaa839301ca68b4669ac377239>`_) [`mharista <https://github.com/mharista>`_]
+    CVP 2018.2 includes large changes to the Restful APIs. Many APIs are deprecated and many APIs return data is slightly different from data returned by 2018.1.
+    This update does processing to help mitigate some of these changes by fixing return data of 2018.2 to look more like return data from 2018.1 in cases where
+    fields are removed or have their name key changed. Be aware that though this update catches many of these cases it does not catch all.
+
+Fixed
+^^^^^
+
+* Fix connection reconnect handling for CVP 2018 support. (`e13dc54 <https://github.com/aristanetworks/cvprac/commit/e13dc546ecccf7fd25fd48458226cbe9c3cf0aa8>`_) [`mharista <https://github.com/mharista>`_]
+    Unauthorized handled differently.
diff --git a/docs/release-notes-1.0.1.rst b/docs/release-notes-1.0.1.rst
new file mode 100644
index 0000000..425a295
--- /dev/null
+++ b/docs/release-notes-1.0.1.rst
@@ -0,0 +1,28 @@
+######
+v1.0.1
+######
+
+2019-1-16
+
+New Modules
+^^^^^^^^^^^
+
+* Add cancel_image API method for removing an added image before it is saved. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+    Used in system tests for add_image to reset the CVP node under test to its original state.
+* Add delete_image_bundle API method for removing an image bundle. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+    Used in system tests for add_update_delete_image_bundle to reset the CVP node under test to its original state.
+
+Enhancements
+^^^^^^^^^^^^
+
+* Updated all necessary modules and tests to support Python 3. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+* Updated add_image method to use cvp_client object. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+* Updated system tests to put CVP node under test back into its original state. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fixed usages of urllib quote_plus method to support Python 3. (`815ec47 <https://github.com/aristanetworks/cvprac/commit/815ec478409473a2259669594a6710895e908726>`_) [`mharista <https://github.com/mharista>`_]
+    Python 2 vs Python 3 require importing the method from different modules.
+* Fixed formatting issues with client _make_request that were causing systests ran with Python 3 to fail. (`76 <https://github.com/aristanetworks/cvprac/pull/76>`_) [`mharista <https://github.com/mharista>`_]
+    When running systests with Python 3 the old _make_request was running UnboundLocalError.
diff --git a/docs/release-notes-1.0.2.rst b/docs/release-notes-1.0.2.rst
new file mode 100644
index 0000000..e9aa5f8
--- /dev/null
+++ b/docs/release-notes-1.0.2.rst
@@ -0,0 +1,32 @@
+######
+v1.0.2
+######
+
+2020-2-3
+
+New Modules
+^^^^^^^^^^^
+
+* Added API modules for cancel and delete change controls. (`21102ac <https://github.com/aristanetworks/cvprac/commit/21102ac35d591059d7c2ac26e620d6423e21f275>`_) [`mharista <https://github.com/mharista>`_]
+* Add modules for applying configlets to containers and removing configlets from containers. (`89 <https://github.com/aristanetworks/cvprac/pull/89>`_) [`mharista <https://github.com/mharista>`_]
+* Add module and test for API endpoint /provisioning/v2/validateAndCompareConfiglets.do. (`93 <https://github.com/aristanetworks/cvprac/pull/93>`_) [`mharista <https://github.com/mharista>`_]
+* Updates for CVP 2019. Add search_configlets method. Update how we set the api version. Use pkg_resoureces.parse_version instead of brute force. (`95 <https://github.com/aristanetworks/cvprac/pull/95>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+* Add method and tests for API endpoint /provisioning/getNetElementInfoById.do. (`d26d69f <https://github.com/aristanetworks/cvprac/commit/d26d69f16f13bbacbd72d2ee3ea4ae32c3fd1a98>`_) [`mharista <https://github.com/mharista>`_]
+* Add method and tests for resetting a device back to Undefined container. (`fb9a96b <https://github.com/aristanetworks/cvprac/commit/fb9a96b1fbdf04c381460f8aa68a53b2b2ff8c70>`_) [`mharista <https://github.com/mharista>`_]
+* Add method for adding configletbuilder. (`97 <https://github.com/aristanetworks/cvprac/pull/97>`_) [`networkRob <https://github.com/networkRob>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add snapshot template key to task list entries for create change control method. (`80 <https://github.com/aristanetworks/cvprac/pull/80>`_) [`mharista <https://github.com/mharista>`_]
+* Update add_devices_to_inventory to support multiple devices in one call. (`84 <https://github.com/aristanetworks/cvprac/pull/84>`_) [`grybak-arista <https://github.com/grybak-arista>`_]
+* Add ability to set API request timeout via client connect method. (`92 <https://github.com/aristanetworks/cvprac/pull/92>`_) [`mharista <https://github.com/mharista>`_]
+* Add return value for cancel_task method and update necessary tests. (`2356d59 <https://github.com/aristanetworks/cvprac/commit/2356d59e0e0fb9db2de9e8b3f123ad31c97e5cf76>`_) [`mharista <https://github.com/mharista>`_]
+* Update existing Change Control APIs and add new ones for 2019.1.0. (`4fddb1e <https://github.com/aristanetworks/cvprac/commit/4fddb1ebb250f4d58dcd59ed952bdd12b3e04e7d>`_) [`mharista <https://github.com/mharista>`_]
+* Update change_control_available_tasks to use standard get_tasks_by_status for 2019.1. (`06eb19a4 <https://github.com/aristanetworks/cvprac/commit/06eb19a4d6b3db3c22b92c4dc5452e5241f2e00c>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fix issue where requests fail if response has no json payload. (`81 <https://github.com/aristanetworks/cvprac/pull/81>`_) [`mharista <https://github.com/mharista>`_]
+* Update error handling of unauthorized user for CVP 2019.x. (`f4bf302 <https://github.com/aristanetworks/cvprac/commit/f4bf30283891d41d5a55abe46c80736c7159aca9>`_) [`mharista <https://github.com/mharista>`_]
diff --git a/docs/release-notes-1.0.3.rst b/docs/release-notes-1.0.3.rst
new file mode 100644
index 0000000..d5861c0
--- /dev/null
+++ b/docs/release-notes-1.0.3.rst
@@ -0,0 +1,16 @@
+######
+v1.0.3
+######
+
+2020-6-4
+
+New Modules
+^^^^^^^^^^^
+
+Enhancements
+^^^^^^^^^^^^
+
+Fixed
+^^^^^
+
+* Fix issue where cvprac is using the incorrect version of the API for 2018.1.x. (`104 <https://github.com/aristanetworks/cvprac/pull/104>`_) [`colinmacgiolla <https://https://github.com/colinmacgiolla>`_]
diff --git a/docs/release-notes-1.0.4.rst b/docs/release-notes-1.0.4.rst
new file mode 100644
index 0000000..6449b2f
--- /dev/null
+++ b/docs/release-notes-1.0.4.rst
@@ -0,0 +1,32 @@
+######
+v1.0.4
+######
+
+2020-8-18
+
+New Modules
+^^^^^^^^^^^
+
+* Add function and tests for getConfigletsAndAssociatedMappers.do API. (`d8e9316 <https://github.com/aristanetworks/cvprac/commit/d8e93168a3691f466f10e49a98c32b87ceb2aaa1>`_) [`mharista <https://github.com/mharista>`_]
+* Add function and tests for getImageBundleByContainerId.do API. (`131783c <https://github.com/aristanetworks/cvprac/commit/131783ce4efa2afb4ec00c0cb9e6922c38eb4258>`_) [`mharista <https://github.com/mharista>`_]
+* Add functions for user management APIs. (`113 <https://github.com/aristanetworks/cvprac/pull/113>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Add function for delete user API and update user handling tests. (`681dc06 <https://github.com/aristanetworks/cvprac/commit/681dc0601cee2c10d1948284e68ba67baed7049e>`_) [`mharista <https://github.com/mharista>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add delete() function to client for DELETE REST API requests. (`a8cdc82 <https://github.com/aristanetworks/cvprac/commit/a8cdc8274f7764021254bb1ffa87d26d368a8393>`_) [`mharista <https://github.com/mharista>`_]
+* Add new API version (v4) for new CVP version 2020.2. (`546a119 <https://github.com/aristanetworks/cvprac/commit/546a1192e70ed9b77615a41837fecbeb729ca371>`_) [`mharista <https://github.com/mharista>`_]
+* Update delete_devices() function for new CVP version. (`819c073 <https://github.com/aristanetworks/cvprac/commit/819c073bb60696ced61cf128348e59919dd0b3fa>`_) [`mharista <https://github.com/mharista>`_]
+* Update get_device_configuration() function for new CVP version. (`9ef992a <https://github.com/aristanetworks/cvprac/commit/9ef992a4f08f67d79d0899d3627a240ca1f90621>`_) [`mharista <https://github.com/mharista>`_]
+* Update apiversion variable to be float instead of string for better conditional handling. (`425f395 <https://github.com/aristanetworks/cvprac/commit/425f3959944c685e6698220e9f213631ca61679c>`_) [`mharista <https://github.com/mharista>`_]
+* Add initial CVaaS support for CVP local users. (`3c28251 <https://github.com/aristanetworks/cvprac/commit/3c28251f3bb16fc26901318ecbf554ce324082d9>`_) [`mharista <https://github.com/mharista>`_]
+* Improve efficiency of get_inventory() by removing extra API calls. (`b9c0e69 <https://github.com/aristanetworks/cvprac/commit/b9c0e6909296e851468ba55c45938575cda3e6d6>`_) [`mharista <https://github.com/mharista>`_]
+* Improve efficiency of get_containers() function and add support for using CVaaS API token. (`82effac <https://github.com/aristanetworks/cvprac/commit/82effac800ea4cc855f5309c0b4baa490df77b88>`_) [`mharista <https://github.com/mharista>`_]
+* Update documentation with API version handling info and different connection type examples. (`c714262 <https://github.com/aristanetworks/cvprac/commit/c714262290bab2752a64046f1d0955439b7ba94c>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fix issue with different field parameters in image object vs image bundle object. (`7d1b845 <https://github.com/aristanetworks/cvprac/commit/7d1b84522413b21180033cfda945ad25d62a3f30>`_) [`mharista <https://github.com/mharista>`_]
+* Fix issue with 'errorCode' string being in request response text. (`7ea6570 <https://github.com/aristanetworks/cvprac/commit/7ea657013ea3f8bb9007d1e926458209254b4cc9>`_) [`mharista <https://github.com/mharista>`_]
diff --git a/docs/release-notes-1.0.5.rst b/docs/release-notes-1.0.5.rst
new file mode 100644
index 0000000..9cb1b44
--- /dev/null
+++ b/docs/release-notes-1.0.5.rst
@@ -0,0 +1,16 @@
+######
+v1.0.5
+######
+
+2021-2-11
+
+Enhancements
+^^^^^^^^^^^^
+
+* Never fallback to HTTP in case of connection failure. (`c2e6d97 <https://github.com/aristanetworks/cvprac/commit/c2e6d9770efb5eb56e3c4519db22281f6845b6c1>`_) [`freedge <https://github.com/freedge>`_]
+* Add client handling for CVP 2020.3. Update get_logs_by_id for CVP 2020.3. (`ac23188 <https://github.com/aristanetworks/cvprac/commit/ac2318890dfd3af437411363d3b782a9d28dfac7>`_) [`mharista <https://github.com/mharista>`_]
+* Add more detailed docstring to check_compliance function. (`e1ad7e8 <https://github.com/aristanetworks/cvprac/commit/e1ad7e813a6c7e557c27e068591ae7a9e527927f>`_) [`mharista <https://github.com/mharista>`_]
+* Update get_device_by_name and get_device_by_mac to use search_topology instead of get_inventory. (`a2b35cb <https://github.com/aristanetworks/cvprac/commit/a2b35cb0609957b6178c549fb6a33e6eb59eeb5e>`_) [`mharista <https://github.com/mharista>`_]
+* Add general support for using api tokens for access to REST API. (`409b68d <https://github.com/aristanetworks/cvprac/commit/409b68d905850bd471b0355b2574cf4497579ada>`_) [`mharista <https://github.com/mharista>`_]
+* Updated/Enhanced user APIs. (`0c652ea <https://github.com/aristanetworks/cvprac/commit/0c652ea850c9bd4565c5e0f10f1161ae9984cc3f>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Update approve_change_control to provide current time timestamp as default. (`fb13861 <https://github.com/aristanetworks/cvprac/commit/fb1386121b0114bfa06134f7dff4a4efa77a93b6>`_) [`colinmacgiolla <https://github.com/colinmacgiolla>`_]
diff --git a/docs/release-notes-1.0.6.rst b/docs/release-notes-1.0.6.rst
new file mode 100644
index 0000000..de52e0a
--- /dev/null
+++ b/docs/release-notes-1.0.6.rst
@@ -0,0 +1,26 @@
+######
+v1.0.6
+######
+
+2021-5-17
+
+New Modules
+^^^^^^^^^^^
+
+* Added API method update_configlet_builder and test. (`a32dd7a <https://github.com/aristanetworks/cvprac/commit/a32dd7ae00f73d887eb7ae06635c0102be80945d>`_) [`dbm79 <https://github.com/dbm79>`_]
+* Added function and test for API endpoint updateReconcileConfiglet.do. (`7e90de9 <https://github.com/aristanetworks/cvprac/commit/7e90de90c416c7dce750e1e9ae2928794efc2b1f>`_) [`mharista <https://github.com/mharista>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add client handling for new resource API REST bindings that return multiple objects in response data. (`bea2d28 <https://github.com/aristanetworks/cvprac/commit/bea2d282093ceb10085e158acd76ed20c12ae485>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fix client logout function to use cvprac client post function instead of session post function. (`abaf257 <https://github.com/aristanetworks/cvprac/commit/abaf2577afb5b9b5e9d99a6b848ca2e987c22e66>`_) [`mharista <https://github.com/mharista>`_]
+* Mask localhost/127.0.0.1 with node IP for configlet builder scripts. (`d45ac6e <https://github.com/aristanetworks/cvprac/commit/d45ac6e06394c05bb4c5584a14f262e3c814eef5>`_) [`Rajat Bajaj <https://github.com>`_]
+* Updating info string to tackle backend inconsistent state when moving devices from the Undefined container. (`82ea8b9 <https://github.com/aristanetworks/cvprac/commit/82ea8b922c57bb86719351c55a2f8a671d49e0db>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Remove CVaaS un/pw login. Only API tokens for CVaaS now. (`f9fd6b5 <https://github.com/aristanetworks/cvprac/commit/f9fd6b51698de9afcb6112c0180185a6e76f4e5c>`_) [`mharista <https://github.com/mharista>`_]
+* Update redundant functions to self reference. (`0095b00 <https://github.com/aristanetworks/cvprac/commit/0095b0001839723680caea62323cae56a130ad32>`_) [`mharista <https://github.com/mharista>`_]
+* Add exception when attempting to delete container with children for CVP versions 2020.1 and beyond. (`35bb566 <https://github.com/aristanetworks/cvprac/commit/35bb56609d6d986b11dff11b4454e2cdc120ccd9>`_) [`mharista <https://github.com/mharista>`_]
diff --git a/docs/release-notes-1.0.7.rst b/docs/release-notes-1.0.7.rst
new file mode 100644
index 0000000..137ad10
--- /dev/null
+++ b/docs/release-notes-1.0.7.rst
@@ -0,0 +1,19 @@
+######
+v1.0.7
+######
+
+2021-7-1
+
+New Modules
+^^^^^^^^^^^
+
+* Added new method for searching for a device by serial_number. (`f23e154 <https://github.com/aristanetworks/cvprac/commit/f23e154cb8c0ed33b8fd988f54b298963d191fd0>`_) [`titom73 <https://github.com/titom73>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Added form parameter to update_configlet_builder function. (`e5e3719 <https://github.com/aristanetworks/cvprac/commit/e5e37199647d70e9efdef844b17ce1ca88103db2>`_) [`mharista <https://github.com/mharista>`_]
+* Added parameter to apply_configlets_to_device for reordering existing configlets. (`6681800 <https://github.com/aristanetworks/cvprac/commit/66818006c221ea56db7393aabb7805ed0275cf53>`_) [`mharista <https://github.com/mharista>`_]
+* Added documentation examples of cvprac usage in docs/labs. (`b1c3443 <https://github.com/aristanetworks/cvprac/commit/b1c34433636958a2c3ab115a61d9dcec0f21ad80>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Added support for searching by hostname to get_device_by_name. (`1eb08cb <https://github.com/aristanetworks/cvprac/commit/1eb08cbaf19d6723bbff0ef600b5beaaffa86b40>`_) [`titom73 <https://github.com/titom73>`_]
+* Added lab example for saving topology with specific tempaction data. (`f3282a2 <https://github.com/aristanetworks/cvprac/commit/f3282a29a1b6f5acd81d3c0b24be5eb3b3ce89c9>`_) [`noredistribution <https://github.com/noredistribution>`_]
diff --git a/docs/release-notes-1.2.0.rst b/docs/release-notes-1.2.0.rst
new file mode 100644
index 0000000..1bc4db9
--- /dev/null
+++ b/docs/release-notes-1.2.0.rst
@@ -0,0 +1,33 @@
+######
+v1.2.0
+######
+
+2022-5-20
+
+New Modules
+^^^^^^^^^^^
+
+* Added new method for creating TerminAttr enrollment token. (`9bf409b <https://github.com/aristanetworks/cvprac/commit/9bf409b864774490dabac6fdcef24dc3735ad240>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Added new methods for managing tags and workspaces. (`e0b8185 <https://github.com/aristanetworks/cvprac/commit/e0b818597b78345759be20b3319c3d574e56f732>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Additional methods for managing workspaces. (`71eea87 <https://github.com/aristanetworks/cvprac/commit/71eea87a012950165f7e87b2bb8b83556da5b4bf>`_) [`mharista <https://github.com/mharista>`_]
+* Added new methods for change control resource APIs. (`d0b1916 <https://github.com/aristanetworks/cvprac/commit/d0b19164012fc6358fb71bdba21ebd44ec126ca2>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Added new methods for change control scheduling and device decommissioning. (`370d02f <https://github.com/aristanetworks/cvprac/commit/370d02fe8a33436337d0866d54a0201f76a5c44b>`_) [`noredistribution <https://github.com/noredistribution>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Added ability to run change control tasks sequentially or in parallel. (`5fd48d5e <https://github.com/aristanetworks/cvprac/commit/5fd48d5e33b6f657650b6bde949e202ba644776c>`_) [`mharista <https://github.com/mharista>`_]
+* Improved system test setup and base classes. (`36029b5 <https://github.com/aristanetworks/cvprac/commit/36029b5c0f5d47b6cddeca89b33380afb69f2ec2>`_) [`KonikaChaurasiya-GSLab <https://github.com/KonikaChaurasiya-GSLab>`_]
+* Do not run getConfigletByName for every configlet to make get_configlets more efficient. (`3c1a3eb <https://github.com/aristanetworks/cvprac/commit/3c1a3eb2ae9ebe2ae3f07835ac86cdbd33d34baa>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Added system tests for new change control resource APIs and more system test infrastructure enhancements. (`4564ef3 <https://github.com/aristanetworks/cvprac/commit/4564ef327f1b8abd743adb791ed742d586fc5587>`_) [`KonikaChaurasiya-GSLab <https://github.com/KonikaChaurasiya-GSLab>`_]
+* Added system test for new decommission device APIs. (`4fd4b7f <https://github.com/aristanetworks/cvprac/commit/4fd4b7f476ca08323fdf4c96df41665e7f78ec96>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Documentation format updates. (`ac4f2ff <https://github.com/aristanetworks/cvprac/commit/ac4f2ff8f45fd68b42a5ce8b68e0a565e9dbe8a8>`_) [`tgodaA <https://github.com/tgodaA>`_]
+* Assorted system test format updates for various CVP versions support.
+* Added support for CVP versions up to CVP 2022.1.0.
+
+Fixed
+^^^^^
+
+* Removed timestamp variable declaration from approve change control function. (`2b1e6ac <https://github.com/aristanetworks/cvprac/commit/2b1e6ac44fbc912ea60841eb10ab2d19b1f59c65>`_) [`mharista <https://github.com/mharista>`_]
+* Add wrapper function for validate_config that will return the full response data structure. (`0540c7a <https://github.com/aristanetworks/cvprac/commit/0540c7ac64cba0b6a8ad4de00f828519d1d5f557>`_) [`mharista <https://github.com/mharista>`_]
+* Fix request headers for CVaaS. (`f57ea4e <https://github.com/aristanetworks/cvprac/commit/f57ea4e6089130eccbc91f6831fbb3d2054020af>`_) [`mharista <https://github.com/mharista>`_]
diff --git a/docs/release-notes-1.2.2.rst b/docs/release-notes-1.2.2.rst
new file mode 100644
index 0000000..84b8e39
--- /dev/null
+++ b/docs/release-notes-1.2.2.rst
@@ -0,0 +1,26 @@
+######
+v1.2.2
+######
+
+2022-10-6
+
+New Modules
+^^^^^^^^^^^
+
+* Add function for getUsers API. (`203 <https://github.com/aristanetworks/cvprac/pull/203>`_) [`mharista <https://github.com/mharista>`_]
+* Added service account Resource APIs. (`208 <https://github.com/aristanetworks/cvprac/pull/208>`_) [`noredistribution <https://github.com/noredistribution>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Updated and added examples. (`205 <https://github.com/aristanetworks/cvprac/pull/205>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Update documentation for PR semantics. (`206 <https://github.com/aristanetworks/cvprac/pull/206>`_) [`tgodaA <https://github.com/tgodaA>`_]
+* Update development tools. (`209 <https://github.com/aristanetworks/cvprac/pull/209>`_) [`mharista <https://github.com/mharista>`_]
+* Update system tests for CVP 2022.2.0 support. (`2fcf3d2 <https://github.com/aristanetworks/cvprac/commit/2fcf3d2ea409ede5ff1389fccfced773d1806d54>`_) [`mharista <https://github.com/mharista>`_]
+* Simplified CVP version handling. (`211 <https://github.com/aristanetworks/cvprac/pull/211>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Raise error for JSON decoding when incomplete block is found. (`202 <https://github.com/aristanetworks/cvprac/pull/202>`_) [`mharista <https://github.com/mharista>`_]
+* Fixed issue with "data" key for Resource API GetAll calls that return a single object. (`215 <https://github.com/aristanetworks/cvprac/pull/215>`_) [`mharista <https://github.com/mharista>`_]
diff --git a/docs/release-notes-1.3.0.rst b/docs/release-notes-1.3.0.rst
new file mode 100644
index 0000000..1e9879c
--- /dev/null
+++ b/docs/release-notes-1.3.0.rst
@@ -0,0 +1,30 @@
+######
+v1.3.0
+######
+
+2023-2-28
+
+New Modules
+^^^^^^^^^^^
+
+* Added functions for role APIs. (`238 <https://github.com/aristanetworks/cvprac/pull/238>`_) [`vmmor <https://github.com/vmmor>`_]
+* Added support for proxies. (`243 <https://github.com/aristanetworks/cvprac/pull/243>`_) [`mharista <https://github.com/mharista>`_]
+
+Enhancements
+^^^^^^^^^^^^
+
+* Add timeouts as configurable parameters for system tests. (`228 <https://github.com/aristanetworks/cvprac/pull/228>`_) [`mharista <https://github.com/mharista>`_]
+* Update delete_change_control() to call new Resource API endpoint for supported versions of CVP. (`230 <https://github.com/aristanetworks/cvprac/pull/230>`_) [`mharista <https://github.com/mharista>`_]
+
+Fixed
+^^^^^
+
+* Fixed format to allow usage of latest requests package. (`227 <https://github.com/aristanetworks/cvprac/pull/227>`_) [`mharista <https://github.com/mharista>`_]
+* Fixed Service Account functions to use State endpoints instead of Config endpoints. (`235 <https://github.com/aristanetworks/cvprac/pull/235>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Handle case for get_parent_container_for_device() returning None within reset_device(). (`240 <https://github.com/aristanetworks/cvprac/pull/240>`_) [`Shivani-chourasiya <https://github.com/Shivani-chourasiya>`_]
+
+Documentation
+^^^^^^^^^^^^^
+
+* Add end to end provisioning example for ATD. (`229 <https://github.com/aristanetworks/cvprac/pull/229>`_) [`noredistribution <https://github.com/noredistribution>`_]
+* Add example to list applied devices and containers for specified configlet. (`241 <https://github.com/aristanetworks/cvprac/pull/241>`_) [`noredistribution <https://github.com/noredistribution>`_]
diff --git a/docs/release-notes-1.3.1.rst b/docs/release-notes-1.3.1.rst
new file mode 100644
index 0000000..61dd723
--- /dev/null
+++ b/docs/release-notes-1.3.1.rst
@@ -0,0 +1,10 @@
+######
+v1.3.1
+######
+
+2023-4-12
+
+Fixed
+^^^^^
+
+* Add workaround for issue in CVP API validate config. (`248 <https://github.com/aristanetworks/cvprac/pull/248>`_) [`chetryan <https://github.com/chetryan>`_]