Adding upstream version 2.0.0.upstream/2.0.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 822 insertions, 0 deletions

diff --git a/src/test/Makefile.in b/src/test/Makefile.in
new file mode 100644
index 0000000..c097bd0
--- /dev/null
+++ b/src/test/Makefile.in
@@ -0,0 +1,822 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# DNS Reply Tool (drool)
+#
+# Copyright (c) 2017-2021, OARC, Inc.
+# Copyright (c) 2017, Comcast Corporation
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+#    contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = src/test
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+TEST_LOGS = $(am__test_logs1:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/test-driver
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DNSJIT = @DNSJIT@
+DNSJIT_ROOT = @DNSJIT_ROOT@
+DROOL_SHEBANG = @DROOL_SHEBANG@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+MAINTAINERCLEANFILES = $(srcdir)/Makefile.in env.sh
+CLEANFILES = test*.log test*.trs \
+  *.pcap-dist \
+  test2.out test2.out2 \
+  test2-threads.out test2-threads.out2
+
+TESTS = test1.sh test2.sh
+BUILT_SOURCES = env.sh
+EXTRA_DIST = $(TESTS) \
+  dns.pcap 1qtcp.pcap \
+  test2.gold
+
+all: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .log .pcap .pcap-dist .test .trs
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/test/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/test/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS: 
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all 
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+test1.sh.log: test1.sh
+	@p='test1.sh'; \
+	b='test1.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test2.sh.log: test2.sh
+	@p='test2.sh'; \
+	b='test2.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile
+installdirs:
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: all check check-am install install-am install-strip
+
+.PHONY: all all-am check check-TESTS check-am clean clean-generic \
+	cscopelist-am ctags-am distclean distclean-generic distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am recheck tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+env.sh:
+	echo "export PATH=\"\$$PATH:@DNSJIT_ROOT@/bin\"" >"$@"
+	echo "export LUA_CPATH=\"@DNSJIT_ROOT@/lib/lua/5.1/?.so;;\"" >>"$@"
+	echo "export LUA_PATH=\"@DNSJIT_ROOT@/share/lua/5.1/?.lua;;\"" >>"$@"
+
+test1.sh: env.sh
+
+test2.sh: env.sh dns.pcap-dist 1qtcp.pcap-dist
+
+.pcap.pcap-dist:
+	cp "$<" "$@"
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: