From 3945f3269b3e2763faa1ab22d225ca4dd1856b82 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Thu, 14 Jul 2022 20:53:09 +0200 Subject: Adding upstream version 1.0. Signed-off-by: Daniel Baumann --- doc/man/nvme_status_field.2 | 1153 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1153 insertions(+) create mode 100644 doc/man/nvme_status_field.2 (limited to 'doc/man/nvme_status_field.2') diff --git a/doc/man/nvme_status_field.2 b/doc/man/nvme_status_field.2 new file mode 100644 index 0000000..d39a561 --- /dev/null +++ b/doc/man/nvme_status_field.2 @@ -0,0 +1,1153 @@ +.TH "libnvme" 9 "enum nvme_status_field" "April 2022" "API Manual" LINUX +.SH NAME +enum nvme_status_field \- Defines all parts of the nvme status field: status code, status code type, and additional flags. +.SH SYNOPSIS +enum nvme_status_field { +.br +.BI " NVME_SCT_GENERIC" +, +.br +.br +.BI " NVME_SCT_CMD_SPECIFIC" +, +.br +.br +.BI " NVME_SCT_MEDIA" +, +.br +.br +.BI " NVME_SCT_PATH" +, +.br +.br +.BI " NVME_SCT_VS" +, +.br +.br +.BI " NVME_SCT_MASK" +, +.br +.br +.BI " NVME_SCT_SHIFT" +, +.br +.br +.BI " NVME_SC_MASK" +, +.br +.br +.BI " NVME_SC_SHIFT" +, +.br +.br +.BI " NVME_SC_SUCCESS" +, +.br +.br +.BI " NVME_SC_INVALID_OPCODE" +, +.br +.br +.BI " NVME_SC_INVALID_FIELD" +, +.br +.br +.BI " NVME_SC_CMDID_CONFLICT" +, +.br +.br +.BI " NVME_SC_DATA_XFER_ERROR" +, +.br +.br +.BI " NVME_SC_POWER_LOSS" +, +.br +.br +.BI " NVME_SC_INTERNAL" +, +.br +.br +.BI " NVME_SC_ABORT_REQ" +, +.br +.br +.BI " NVME_SC_ABORT_QUEUE" +, +.br +.br +.BI " NVME_SC_FUSED_FAIL" +, +.br +.br +.BI " NVME_SC_FUSED_MISSING" +, +.br +.br +.BI " NVME_SC_INVALID_NS" +, +.br +.br +.BI " NVME_SC_CMD_SEQ_ERROR" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_LAST" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_COUNT" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_DATA" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_METADATA" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_TYPE" +, +.br +.br +.BI " NVME_SC_CMB_INVALID_USE" +, +.br +.br +.BI " NVME_SC_PRP_INVALID_OFFSET" +, +.br +.br +.BI " NVME_SC_AWU_EXCEEDED" +, +.br +.br +.BI " NVME_SC_OP_DENIED" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_OFFSET" +, +.br +.br +.BI " NVME_SC_HOSTID_FORMAT" +, +.br +.br +.BI " NVME_SC_KAT_EXPIRED" +, +.br +.br +.BI " NVME_SC_KAT_INVALID" +, +.br +.br +.BI " NVME_SC_CMD_ABORTED_PREMEPT" +, +.br +.br +.BI " NVME_SC_SANITIZE_FAILED" +, +.br +.br +.BI " NVME_SC_SANITIZE_IN_PROGRESS" +, +.br +.br +.BI " NVME_SC_SGL_INVALID_GRANULARITY" +, +.br +.br +.BI " NVME_SC_CMD_IN_CMBQ_NOT_SUPP" +, +.br +.br +.BI " NVME_SC_NS_WRITE_PROTECTED" +, +.br +.br +.BI " NVME_SC_CMD_INTERRUPTED" +, +.br +.br +.BI " NVME_SC_TRAN_TPORT_ERROR" +, +.br +.br +.BI " NVME_SC_PROHIBITED_BY_CMD_AND_FEAT" +, +.br +.br +.BI " NVME_SC_ADMIN_CMD_MEDIA_NOT_READY" +, +.br +.br +.BI " NVME_SC_LBA_RANGE" +, +.br +.br +.BI " NVME_SC_CAP_EXCEEDED" +, +.br +.br +.BI " NVME_SC_NS_NOT_READY" +, +.br +.br +.BI " NVME_SC_RESERVATION_CONFLICT" +, +.br +.br +.BI " NVME_SC_FORMAT_IN_PROGRESS" +, +.br +.br +.BI " NVME_SC_CQ_INVALID" +, +.br +.br +.BI " NVME_SC_QID_INVALID" +, +.br +.br +.BI " NVME_SC_QUEUE_SIZE" +, +.br +.br +.BI " NVME_SC_ABORT_LIMIT" +, +.br +.br +.BI " NVME_SC_ABORT_MISSING" +, +.br +.br +.BI " NVME_SC_ASYNC_LIMIT" +, +.br +.br +.BI " NVME_SC_FIRMWARE_SLOT" +, +.br +.br +.BI " NVME_SC_FIRMWARE_IMAGE" +, +.br +.br +.BI " NVME_SC_INVALID_VECTOR" +, +.br +.br +.BI " NVME_SC_INVALID_LOG_PAGE" +, +.br +.br +.BI " NVME_SC_INVALID_FORMAT" +, +.br +.br +.BI " NVME_SC_FW_NEEDS_CONV_RESET" +, +.br +.br +.BI " NVME_SC_INVALID_QUEUE" +, +.br +.br +.BI " NVME_SC_FEATURE_NOT_SAVEABLE" +, +.br +.br +.BI " NVME_SC_FEATURE_NOT_CHANGEABLE" +, +.br +.br +.BI " NVME_SC_FEATURE_NOT_PER_NS" +, +.br +.br +.BI " NVME_SC_FW_NEEDS_SUBSYS_RESET" +, +.br +.br +.BI " NVME_SC_FW_NEEDS_RESET" +, +.br +.br +.BI " NVME_SC_FW_NEEDS_MAX_TIME" +, +.br +.br +.BI " NVME_SC_FW_ACTIVATE_PROHIBITED" +, +.br +.br +.BI " NVME_SC_OVERLAPPING_RANGE" +, +.br +.br +.BI " NVME_SC_NS_INSUFFICIENT_CAP" +, +.br +.br +.BI " NVME_SC_NS_ID_UNAVAILABLE" +, +.br +.br +.BI " NVME_SC_NS_ALREADY_ATTACHED" +, +.br +.br +.BI " NVME_SC_NS_IS_PRIVATE" +, +.br +.br +.BI " NVME_SC_NS_NOT_ATTACHED" +, +.br +.br +.BI " NVME_SC_THIN_PROV_NOT_SUPP" +, +.br +.br +.BI " NVME_SC_CTRL_LIST_INVALID" +, +.br +.br +.BI " NVME_SC_SELF_TEST_IN_PROGRESS" +, +.br +.br +.BI " NVME_SC_BP_WRITE_PROHIBITED" +, +.br +.br +.BI " NVME_SC_INVALID_CTRL_ID" +, +.br +.br +.BI " NVME_SC_INVALID_SEC_CTRL_STATE" +, +.br +.br +.BI " NVME_SC_INVALID_CTRL_RESOURCES" +, +.br +.br +.BI " NVME_SC_INVALID_RESOURCE_ID" +, +.br +.br +.BI " NVME_SC_PMR_SAN_PROHIBITED" +, +.br +.br +.BI " NVME_SC_ANA_GROUP_ID_INVALID" +, +.br +.br +.BI " NVME_SC_ANA_ATTACH_FAILED" +, +.br +.br +.BI " NVME_SC_INSUFFICIENT_CAP" +, +.br +.br +.BI " NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED" +, +.br +.br +.BI " NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED" +, +.br +.br +.BI " NVME_SC_IOCS_NOT_SUPPORTED" +, +.br +.br +.BI " NVME_SC_IOCS_NOT_ENABLED" +, +.br +.br +.BI " NVME_SC_IOCS_COMBINATION_REJECTED" +, +.br +.br +.BI " NVME_SC_INVALID_IOCS" +, +.br +.br +.BI " NVME_SC_ID_UNAVAILABLE" +, +.br +.br +.BI " NVME_SC_INVALID_DISCOVERY_INFO" +, +.br +.br +.BI " NVME_SC_ZONING_DATA_STRUCT_LOCKED" +, +.br +.br +.BI " NVME_SC_ZONING_DATA_STRUCT_NOTFND" +, +.br +.br +.BI " NVME_SC_INSUFFICIENT_DISC_RES" +, +.br +.br +.BI " NVME_SC_REQSTD_FUNCTION_DISABLED" +, +.br +.br +.BI " NVME_SC_ZONEGRP_ORIGINATOR_INVLD" +, +.br +.br +.BI " NVME_SC_BAD_ATTRIBUTES" +, +.br +.br +.BI " NVME_SC_INVALID_PI" +, +.br +.br +.BI " NVME_SC_READ_ONLY" +, +.br +.br +.BI " NVME_SC_CMD_SIZE_LIMIT_EXCEEDED" +, +.br +.br +.BI " NVME_SC_CONNECT_FORMAT" +, +.br +.br +.BI " NVME_SC_CONNECT_CTRL_BUSY" +, +.br +.br +.BI " NVME_SC_CONNECT_INVALID_PARAM" +, +.br +.br +.BI " NVME_SC_CONNECT_RESTART_DISC" +, +.br +.br +.BI " NVME_SC_CONNECT_INVALID_HOST" +, +.br +.br +.BI " NVME_SC_DISCONNECT_INVALID_QTYPE" +, +.br +.br +.BI " NVME_SC_DISCOVERY_RESTART" +, +.br +.br +.BI " NVME_SC_AUTH_REQUIRED" +, +.br +.br +.BI " NVME_SC_ZNS_INVALID_OP_REQUEST" +, +.br +.br +.BI " NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE" +, +.br +.br +.BI " NVME_SC_ZNS_BOUNDARY_ERROR" +, +.br +.br +.BI " NVME_SC_ZNS_FULL" +, +.br +.br +.BI " NVME_SC_ZNS_READ_ONLY" +, +.br +.br +.BI " NVME_SC_ZNS_OFFLINE" +, +.br +.br +.BI " NVME_SC_ZNS_INVALID_WRITE" +, +.br +.br +.BI " NVME_SC_ZNS_TOO_MANY_ACTIVE" +, +.br +.br +.BI " NVME_SC_ZNS_TOO_MANY_OPENS" +, +.br +.br +.BI " NVME_SC_ZNS_INVAL_TRANSITION" +, +.br +.br +.BI " NVME_SC_WRITE_FAULT" +, +.br +.br +.BI " NVME_SC_READ_ERROR" +, +.br +.br +.BI " NVME_SC_GUARD_CHECK" +, +.br +.br +.BI " NVME_SC_APPTAG_CHECK" +, +.br +.br +.BI " NVME_SC_REFTAG_CHECK" +, +.br +.br +.BI " NVME_SC_COMPARE_FAILED" +, +.br +.br +.BI " NVME_SC_ACCESS_DENIED" +, +.br +.br +.BI " NVME_SC_UNWRITTEN_BLOCK" +, +.br +.br +.BI " NVME_SC_STORAGE_TAG_CHECK" +, +.br +.br +.BI " NVME_SC_ANA_INTERNAL_PATH_ERROR" +, +.br +.br +.BI " NVME_SC_ANA_PERSISTENT_LOSS" +, +.br +.br +.BI " NVME_SC_ANA_INACCESSIBLE" +, +.br +.br +.BI " NVME_SC_ANA_TRANSITION" +, +.br +.br +.BI " NVME_SC_CTRL_PATH_ERROR" +, +.br +.br +.BI " NVME_SC_HOST_PATH_ERROR" +, +.br +.br +.BI " NVME_SC_CMD_ABORTED_BY_HOST" +, +.br +.br +.BI " NVME_SC_CRD" +, +.br +.br +.BI " NVME_SC_MORE" +, +.br +.br +.BI " NVME_SC_DNR" + +}; +.SH Constants +.IP "NVME_SCT_GENERIC" 12 +Generic errors applicable to multiple opcodes +.IP "NVME_SCT_CMD_SPECIFIC" 12 +Errors associated to a specific opcode +.IP "NVME_SCT_MEDIA" 12 +Errors associated with media and data integrity +.IP "NVME_SCT_PATH" 12 +Errors associated with the paths connection +.IP "NVME_SCT_VS" 12 +Vendor specific errors +.IP "NVME_SCT_MASK" 12 +Mask to get the value of the Status Code Type +.IP "NVME_SCT_SHIFT" 12 +-- undescribed -- +.IP "NVME_SC_MASK" 12 +Mask to get the value of the status code. +.IP "NVME_SC_SHIFT" 12 +-- undescribed -- +.IP "NVME_SC_SUCCESS" 12 +Successful Completion: The command +completed without error. +.IP "NVME_SC_INVALID_OPCODE" 12 +Invalid Command Opcode: A reserved coded +value or an unsupported value in the +command opcode field. +.IP "NVME_SC_INVALID_FIELD" 12 +Invalid Field in Command: A reserved +coded value or an unsupported value in a +defined field. +.IP "NVME_SC_CMDID_CONFLICT" 12 +Command ID Conflict: The command +identifier is already in use. +.IP "NVME_SC_DATA_XFER_ERROR" 12 +Data Transfer Error: Transferring the +data or metadata associated with a +command experienced an error. +.IP "NVME_SC_POWER_LOSS" 12 +Commands Aborted due to Power Loss +Notification: Indicates that the command +was aborted due to a power loss +notification. +.IP "NVME_SC_INTERNAL" 12 +Internal Error: The command was not +completed successfully due to an internal error. +.IP "NVME_SC_ABORT_REQ" 12 +Command Abort Requested: The command was +aborted due to an Abort command being +received that specified the Submission +Queue Identifier and Command Identifier +of this command. +.IP "NVME_SC_ABORT_QUEUE" 12 +Command Aborted due to SQ Deletion: The +command was aborted due to a Delete I/O +Submission Queue request received for the +Submission Queue to which the command was +submitted. +.IP "NVME_SC_FUSED_FAIL" 12 +Command Aborted due to Failed Fused Command: +The command was aborted due to the other +command in a fused operation failing. +.IP "NVME_SC_FUSED_MISSING" 12 +Aborted due to Missing Fused Command: The +fused command was aborted due to the +adjacent submission queue entry not +containing a fused command that is the +other command. +.IP "NVME_SC_INVALID_NS" 12 +Invalid Namespace or Format: The +namespace or the format of that namespace +is invalid. +.IP "NVME_SC_CMD_SEQ_ERROR" 12 +Command Sequence Error: The command was +aborted due to a protocol violation in a +multi-command sequence. +.IP "NVME_SC_SGL_INVALID_LAST" 12 +Invalid SGL Segment Descriptor: The +command includes an invalid SGL Last +Segment or SGL Segment descriptor. +.IP "NVME_SC_SGL_INVALID_COUNT" 12 +Invalid Number of SGL Descriptors: There +is an SGL Last Segment descriptor or an +SGL Segment descriptor in a location +other than the last descriptor of a +segment based on the length indicated. +.IP "NVME_SC_SGL_INVALID_DATA" 12 +Data SGL Length Invalid: This may occur +if the length of a Data SGL is too short. +This may occur if the length of a Data +SGL is too long and the controller does +not support SGL transfers longer than the +amount of data to be transferred as +indicated in the SGL Support field of the +Identify Controller data structure. +.IP "NVME_SC_SGL_INVALID_METADATA" 12 +Metadata SGL Length Invalid: This may +occur if the length of a Metadata SGL is +too short. This may occur if the length +of a Metadata SGL is too long and the +controller does not support SGL transfers +longer than the amount of data to be +transferred as indicated in the SGL +Support field of the Identify Controller +data structure. +.IP "NVME_SC_SGL_INVALID_TYPE" 12 +SGL Descriptor Type Invalid: The type of +an SGL Descriptor is a type that is not +supported by the controller. +.IP "NVME_SC_CMB_INVALID_USE" 12 +Invalid Use of Controller Memory Buffer: +The attempted use of the Controller +Memory Buffer is not supported by the +controller. +.IP "NVME_SC_PRP_INVALID_OFFSET" 12 +PRP Offset Invalid: The Offset field for +a PRP entry is invalid. +.IP "NVME_SC_AWU_EXCEEDED" 12 +Atomic Write Unit Exceeded: The length +specified exceeds the atomic write unit size. +.IP "NVME_SC_OP_DENIED" 12 +Operation Denied: The command was denied +due to lack of access rights. Refer to +the appropriate security specification. +.IP "NVME_SC_SGL_INVALID_OFFSET" 12 +SGL Offset Invalid: The offset specified +in a descriptor is invalid. This may +occur when using capsules for data +transfers in NVMe over Fabrics +implementations and an invalid offset in +the capsule is specified. +.IP "NVME_SC_HOSTID_FORMAT" 12 +Host Identifier Inconsistent Format: The +NVM subsystem detected the simultaneous +use of 64- bit and 128-bit Host +Identifier values on different +controllers. +.IP "NVME_SC_KAT_EXPIRED" 12 +Keep Alive Timer Expired: The Keep Alive +Timer expired. +.IP "NVME_SC_KAT_INVALID" 12 +Keep Alive Timeout Invalid: The Keep +Alive Timeout value specified is invalid. +.IP "NVME_SC_CMD_ABORTED_PREMEPT" 12 +Command Aborted due to Preempt and Abort: +The command was aborted due to a +Reservation Acquire command. +.IP "NVME_SC_SANITIZE_FAILED" 12 +Sanitize Failed: The most recent sanitize +operation failed and no recovery action +has been successfully completed. +.IP "NVME_SC_SANITIZE_IN_PROGRESS" 12 +Sanitize In Progress: The requested +function (e.g., command) is prohibited +while a sanitize operation is in +progress. +.IP "NVME_SC_SGL_INVALID_GRANULARITY" 12 +SGL Data Block Granularity Invalid: The +Address alignment or Length granularity +for an SGL Data Block descriptor is +invalid. +.IP "NVME_SC_CMD_IN_CMBQ_NOT_SUPP" 12 +Command Not Supported for Queue in CMB: +The implementation does not support +submission of the command to a Submission +Queue in the Controller Memory Buffer or +command completion to a Completion Queue +in the Controller Memory Buffer. +.IP "NVME_SC_NS_WRITE_PROTECTED" 12 +Namespace is Write Protected: The command +is prohibited while the namespace is +write protected as a result of a change +in the namespace write protection state +as defined by the Namespace Write +Protection State Machine. +.IP "NVME_SC_CMD_INTERRUPTED" 12 +Command Interrupted: Command processing +was interrupted and the controller is +unable to successfully complete the +command. The host should retry the +command. +.IP "NVME_SC_TRAN_TPORT_ERROR" 12 +Transient Transport Error: A transient +transport error was detected. If the +command is retried on the same +controller, the command is likely to +succeed. A command that fails with a +transient transport error four or more +times should be treated as a persistent +transport error that is not likely to +succeed if retried on the same +controller. +.IP "NVME_SC_PROHIBITED_BY_CMD_AND_FEAT" 12 +Command Prohibited by Command and Feature +Lockdown: The command was aborted due to +command execution being prohibited by +the Command and Feature Lockdown. +.IP "NVME_SC_ADMIN_CMD_MEDIA_NOT_READY" 12 +Admin Command Media Not Ready: The Admin +command requires access to media and +the media is not ready. +.IP "NVME_SC_LBA_RANGE" 12 +LBA Out of Range: The command references +an LBA that exceeds the size of the namespace. +.IP "NVME_SC_CAP_EXCEEDED" 12 +Capacity Exceeded: Execution of the +command has caused the capacity of the +namespace to be exceeded. +.IP "NVME_SC_NS_NOT_READY" 12 +Namespace Not Ready: The namespace is not +ready to be accessed as a result of a +condition other than a condition that is +reported as an Asymmetric Namespace +Access condition. +.IP "NVME_SC_RESERVATION_CONFLICT" 12 +Reservation Conflict: The command was +aborted due to a conflict with a +reservation held on the accessed +namespace. +.IP "NVME_SC_FORMAT_IN_PROGRESS" 12 +Format In Progress: A Format NVM command +is in progress on the namespace. +.IP "NVME_SC_CQ_INVALID" 12 +Completion Queue Invalid: The Completion +Queue identifier specified in the command +does not exist. +.IP "NVME_SC_QID_INVALID" 12 +Invalid Queue Identifier: The creation of +the I/O Completion Queue failed due to an +invalid queue identifier specified as +part of the command. An invalid queue +identifier is one that is currently in +use or one that is outside the range +supported by the controller. +.IP "NVME_SC_QUEUE_SIZE" 12 +Invalid Queue Size: The host attempted to +create an I/O Completion Queue with an +invalid number of entries. +.IP "NVME_SC_ABORT_LIMIT" 12 +Abort Command Limit Exceeded: The number +of concurrently outstanding Abort commands +has exceeded the limit indicated in the +Identify Controller data structure. +.IP "NVME_SC_ABORT_MISSING" 12 +Abort Command is missing: The abort +command is missing. +.IP "NVME_SC_ASYNC_LIMIT" 12 +Asynchronous Event Request Limit +Exceeded: The number of concurrently +outstanding Asynchronous Event Request +commands has been exceeded. +.IP "NVME_SC_FIRMWARE_SLOT" 12 +Invalid Firmware Slot: The firmware slot +indicated is invalid or read only. This +error is indicated if the firmware slot +exceeds the number supported. +.IP "NVME_SC_FIRMWARE_IMAGE" 12 +Invalid Firmware Image: The firmware +image specified for activation is invalid +and not loaded by the controller. +.IP "NVME_SC_INVALID_VECTOR" 12 +Invalid Interrupt Vector: The creation of +the I/O Completion Queue failed due to an +invalid interrupt vector specified as +part of the command. +.IP "NVME_SC_INVALID_LOG_PAGE" 12 +Invalid Log Page: The log page indicated +is invalid. This error condition is also +returned if a reserved log page is +requested. +.IP "NVME_SC_INVALID_FORMAT" 12 +Invalid Format: The LBA Format specified +is not supported. +.IP "NVME_SC_FW_NEEDS_CONV_RESET" 12 +Firmware Activation Requires Conventional Reset: +The firmware commit was successful, +however, activation of the firmware image +requires a conventional reset. +.IP "NVME_SC_INVALID_QUEUE" 12 +Invalid Queue Deletion: Invalid I/O +Completion Queue specified to delete. +.IP "NVME_SC_FEATURE_NOT_SAVEABLE" 12 +Feature Identifier Not Saveable: The +Feature Identifier specified does not +support a saveable value. +.IP "NVME_SC_FEATURE_NOT_CHANGEABLE" 12 +Feature Not Changeable: The Feature +Identifier is not able to be changed. +.IP "NVME_SC_FEATURE_NOT_PER_NS" 12 +Feature Not Namespace Specific: The +Feature Identifier specified is not +namespace specific. The Feature +Identifier settings apply across all +namespaces. +.IP "NVME_SC_FW_NEEDS_SUBSYS_RESET" 12 +Firmware Activation Requires NVM +Subsystem Reset: The firmware commit was +successful, however, activation of the +firmware image requires an NVM Subsystem. +.IP "NVME_SC_FW_NEEDS_RESET" 12 +Firmware Activation Requires Controller +Level Reset: The firmware commit was +successful; however, the image specified +does not support being activated without +a reset. +.IP "NVME_SC_FW_NEEDS_MAX_TIME" 12 +Firmware Activation Requires Maximum Time +Violation: The image specified if +activated immediately would exceed the +Maximum Time for Firmware Activation +(MTFA) value reported in Identify +Controller. +.IP "NVME_SC_FW_ACTIVATE_PROHIBITED" 12 +Firmware Activation Prohibited: The image +specified is being prohibited from +activation by the controller for vendor +specific reasons. +.IP "NVME_SC_OVERLAPPING_RANGE" 12 +Overlapping Range: The downloaded +firmware image has overlapping ranges. +.IP "NVME_SC_NS_INSUFFICIENT_CAP" 12 +Namespace Insufficient Capacity: Creating +the namespace requires more free space +than is currently available. +.IP "NVME_SC_NS_ID_UNAVAILABLE" 12 +Namespace Identifier Unavailable: The +number of namespaces supported has been +exceeded. +.IP "NVME_SC_NS_ALREADY_ATTACHED" 12 +Namespace Already Attached: The +controller is already attached to the +namespace specified. +.IP "NVME_SC_NS_IS_PRIVATE" 12 +Namespace Is Private: The namespace is +private and is already attached to one +controller. +.IP "NVME_SC_NS_NOT_ATTACHED" 12 +Namespace Not Attached: The request to +detach the controller could not be +completed because the controller is not +attached to the namespace. +.IP "NVME_SC_THIN_PROV_NOT_SUPP" 12 +Thin Provisioning Not Supported: Thin +provisioning is not supported by the +controller. +.IP "NVME_SC_CTRL_LIST_INVALID" 12 +Controller List Invalid: The controller +list provided contains invalid controller +ids. +.IP "NVME_SC_SELF_TEST_IN_PROGRESS" 12 +Device Self-test In Progress: The controller +or NVM subsystem already has a device +self-test operation in process. +.IP "NVME_SC_BP_WRITE_PROHIBITED" 12 +Boot Partition Write Prohibited: The +command is trying to modify a locked Boot +Partition. +.IP "NVME_SC_INVALID_CTRL_ID" 12 +Invalid Controller Identifier: +.IP "NVME_SC_INVALID_SEC_CTRL_STATE" 12 +Invalid Secondary Controller State +.IP "NVME_SC_INVALID_CTRL_RESOURCES" 12 +Invalid Number of Controller Resources +.IP "NVME_SC_INVALID_RESOURCE_ID" 12 +Invalid Resource Identifier +.IP "NVME_SC_PMR_SAN_PROHIBITED" 12 +Sanitize Prohibited While Persistent +Memory Region is Enabled +.IP "NVME_SC_ANA_GROUP_ID_INVALID" 12 +ANA Group Identifier Invalid: The specified +ANA Group Identifier (ANAGRPID) is not +supported in the submitted command. +.IP "NVME_SC_ANA_ATTACH_FAILED" 12 +ANA Attach Failed: The controller is not +attached to the namespace as a result +of an ANA condition. +.IP "NVME_SC_INSUFFICIENT_CAP" 12 +Insufficient Capacity: Requested operation +requires more free space than is currently +available. +.IP "NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED" 12 +Namespace Attachment Limit Exceeded: +Attaching the ns to a controller causes +max number of ns attachments allowed +to be exceeded. +.IP "NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED" 12 +Prohibition of Command Execution +Not Supported +.IP "NVME_SC_IOCS_NOT_SUPPORTED" 12 +I/O Command Set Not Supported +.IP "NVME_SC_IOCS_NOT_ENABLED" 12 +I/O Command Set Not Enabled +.IP "NVME_SC_IOCS_COMBINATION_REJECTED" 12 +I/O Command Set Combination Rejected +.IP "NVME_SC_INVALID_IOCS" 12 +Invalid I/O Command Set +.IP "NVME_SC_ID_UNAVAILABLE" 12 +Identifier Unavailable +.IP "NVME_SC_INVALID_DISCOVERY_INFO" 12 +The discovery information provided in +one or more extended discovery +information entries is not applicable +for the type of entity selected in +the Entity Type (ETYPE) field of the +Discovery Information Management +command data portion’s header. +.IP "NVME_SC_ZONING_DATA_STRUCT_LOCKED" 12 +The requested Zoning data structure +is locked on the CDC. +.IP "NVME_SC_ZONING_DATA_STRUCT_NOTFND" 12 +The requested Zoning data structure +does not exist on the CDC. +.IP "NVME_SC_INSUFFICIENT_DISC_RES" 12 +The number of discover information +entries provided in the data portion +of the Discovery Information +Management command for a registration +task (i.e., TAS field cleared to 0h) +exceeds the available capacity for +new discovery information entries on +the CDC or DDC. This may be a +transient condition. +.IP "NVME_SC_REQSTD_FUNCTION_DISABLED" 12 +Fabric Zoning is not enabled on the +CDC +.IP "NVME_SC_ZONEGRP_ORIGINATOR_INVLD" 12 +-- undescribed -- +.IP "NVME_SC_BAD_ATTRIBUTES" 12 +Conflicting Dataset Management Attributes +.IP "NVME_SC_INVALID_PI" 12 +Invalid Protection Information +.IP "NVME_SC_READ_ONLY" 12 +Attempted Write to Read Only Range +.IP "NVME_SC_CMD_SIZE_LIMIT_EXCEEDED" 12 +Command Size Limit Exceeded +.IP "NVME_SC_CONNECT_FORMAT" 12 +Incompatible Format: The NVM subsystem +does not support the record format +specified by the host. +.IP "NVME_SC_CONNECT_CTRL_BUSY" 12 +Controller Busy: The controller is +already associated with a host. +.IP "NVME_SC_CONNECT_INVALID_PARAM" 12 +Connect Invalid Parameters: One or more +of the command parameters. +.IP "NVME_SC_CONNECT_RESTART_DISC" 12 +Connect Restart Discovery: The NVM +subsystem requested is not available. +.IP "NVME_SC_CONNECT_INVALID_HOST" 12 +Connect Invalid Host: The host is either +not allowed to establish an association +to any controller in the NVM subsystem or +the host is not allowed to establish an +association to the specified controller +.IP "NVME_SC_DISCONNECT_INVALID_QTYPE" 12 +Invalid Queue Type: The command was sent +on the wrong queue type. +.IP "NVME_SC_DISCOVERY_RESTART" 12 +Discover Restart: The snapshot of the +records is now invalid or out of date. +.IP "NVME_SC_AUTH_REQUIRED" 12 +Authentication Required: NVMe in-band +authentication is required and the queue +has not yet been authenticated. +.IP "NVME_SC_ZNS_INVALID_OP_REQUEST" 12 +Invalid Zone Operation Request: +The operation requested is invalid. This may be due to +various conditions, including: attempting to allocate a +ZRWA when a zone is not in the ZSE:Empty state; or +invalid Flush Explicit ZRWA Range Send Zone Action +operation. +.IP "NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE" 12 +ZRWA Resources Unavailable: +No ZRWAs are available. +.IP "NVME_SC_ZNS_BOUNDARY_ERROR" 12 +Zone Boundary Error: The command specifies +logical blocks in more than one zone. +.IP "NVME_SC_ZNS_FULL" 12 +Zone Is Full: The accessed zone is in the +ZSF:Full state. +.IP "NVME_SC_ZNS_READ_ONLY" 12 +Zone Is Read Only: The accessed zone is +in the ZSRO:Read Only state. +.IP "NVME_SC_ZNS_OFFLINE" 12 +Zone Is Offline: The accessed zone is +in the ZSO:Offline state. +.IP "NVME_SC_ZNS_INVALID_WRITE" 12 +Zone Invalid Write: The write to a zone +was not at the write pointer. +.IP "NVME_SC_ZNS_TOO_MANY_ACTIVE" 12 +Too Many Active Zones: The controller +does not allow additional active zones. +.IP "NVME_SC_ZNS_TOO_MANY_OPENS" 12 +Too Many Open Zones: The controller does +not allow additional open zones. +.IP "NVME_SC_ZNS_INVAL_TRANSITION" 12 +Invalid Zone State Transition: The request +is not a valid zone state transition. +.IP "NVME_SC_WRITE_FAULT" 12 +Write Fault: The write data could not be +committed to the media. +.IP "NVME_SC_READ_ERROR" 12 +Unrecovered Read Error: The read data +could not be recovered from the media. +.IP "NVME_SC_GUARD_CHECK" 12 +End-to-end Guard Check Error: The command +was aborted due to an end-to-end guard +check failure. +.IP "NVME_SC_APPTAG_CHECK" 12 +End-to-end Application Tag Check Error: +The command was aborted due to an +end-to-end application tag check failure. +.IP "NVME_SC_REFTAG_CHECK" 12 +End-to-end Reference Tag Check Error: The +command was aborted due to an end-to-end +reference tag check failure. +.IP "NVME_SC_COMPARE_FAILED" 12 +Compare Failure: The command failed due +to a miscompare during a Compare command. +.IP "NVME_SC_ACCESS_DENIED" 12 +Access Denied: Access to the namespace +and/or LBA range is denied due to lack of +access rights. +.IP "NVME_SC_UNWRITTEN_BLOCK" 12 +Deallocated or Unwritten Logical Block: +The command failed due to an attempt to +read from or verify an LBA range +containing a deallocated or unwritten +logical block. +.IP "NVME_SC_STORAGE_TAG_CHECK" 12 +End-to-End Storage Tag Check Error: The +command was aborted due to an end-to-end +storage tag check failure. +.IP "NVME_SC_ANA_INTERNAL_PATH_ERROR" 12 +Internal Path Error: The command was not +completed as the result of a controller +internal error that is specific to the +controller processing the command. +.IP "NVME_SC_ANA_PERSISTENT_LOSS" 12 +Asymmetric Access Persistent Loss: The +requested function (e.g., command) is not +able to be performed as a result of the +relationship between the controller and +the namespace being in the ANA Persistent +Loss state. +.IP "NVME_SC_ANA_INACCESSIBLE" 12 +Asymmetric Access Inaccessible: The +requested function (e.g., command) is not +able to be performed as a result of the +relationship between the controller and +the namespace being in the ANA +Inaccessible state. +.IP "NVME_SC_ANA_TRANSITION" 12 +Asymmetric Access Transition: The +requested function (e.g., command) is not +able to be performed as a result of the +relationship between the controller and +the namespace transitioning between +Asymmetric Namespace Access states. +.IP "NVME_SC_CTRL_PATH_ERROR" 12 +Controller Pathing Error: A pathing error +was detected by the controller. +.IP "NVME_SC_HOST_PATH_ERROR" 12 +Host Pathing Error: A pathing error was +detected by the host. +.IP "NVME_SC_CMD_ABORTED_BY_HOST" 12 +Command Aborted By Host: The command was +aborted as a result of host action. +.IP "NVME_SC_CRD" 12 +Mask to get value of Command Retry Delay +index +.IP "NVME_SC_MORE" 12 +More bit. If set, more status information +for this command as part of the Error +Information log that may be retrieved with +the Get Log Page command. +.IP "NVME_SC_DNR" 12 +Do Not Retry bit. If set, if the same +command is re-submitted to any controller +in the NVM subsystem, then that +re-submitted command is expected to fail. -- cgit v1.2.3