path: root/src/nvme/util.c

// SPDX-License-Identifier: LGPL-2.1-or-later
/*
 * This file is part of libnvme.
 * Copyright (c) 2020 Western Digital Corporation or its affiliates.
 *
 * Authors: Keith Busch <keith.busch@wdc.com>
 * 	    Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
 */

#include <stdio.h>
#include <string.h>
#include <errno.h>

#include <sys/param.h>
#include <sys/types.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <unistd.h>

#include <ccan/endian/endian.h>

#include "private.h"
#include "util.h"
#include "log.h"

static inline __u8 nvme_generic_status_to_errno(__u16 status)
{
	switch (status) {
	case NVME_SC_INVALID_OPCODE:
	case NVME_SC_INVALID_FIELD:
	case NVME_SC_INVALID_NS:
	case NVME_SC_SGL_INVALID_LAST:
	case NVME_SC_SGL_INVALID_COUNT:
	case NVME_SC_SGL_INVALID_DATA:
	case NVME_SC_SGL_INVALID_METADATA:
	case NVME_SC_SGL_INVALID_TYPE:
	case NVME_SC_SGL_INVALID_OFFSET:
	case NVME_SC_PRP_INVALID_OFFSET:
	case NVME_SC_CMB_INVALID_USE:
	case NVME_SC_KAT_INVALID:
		return EINVAL;
	case NVME_SC_CMDID_CONFLICT:
		return EADDRINUSE;
	case NVME_SC_DATA_XFER_ERROR:
	case NVME_SC_INTERNAL:
	case NVME_SC_SANITIZE_FAILED:
		return EIO;
	case NVME_SC_POWER_LOSS:
	case NVME_SC_ABORT_REQ:
	case NVME_SC_ABORT_QUEUE:
	case NVME_SC_FUSED_FAIL:
	case NVME_SC_FUSED_MISSING:
		return EWOULDBLOCK;
	case NVME_SC_CMD_SEQ_ERROR:
		return EILSEQ;
	case NVME_SC_SANITIZE_IN_PROGRESS:
	case NVME_SC_FORMAT_IN_PROGRESS:
		return EINPROGRESS;
	case NVME_SC_NS_WRITE_PROTECTED:
	case NVME_SC_NS_NOT_READY:
	case NVME_SC_RESERVATION_CONFLICT:
	case NVME_SC_OP_DENIED:
	case NVME_SC_ADMIN_CMD_MEDIA_NOT_READY:
		return EACCES;
	case NVME_SC_LBA_RANGE:
		return EREMOTEIO;
	case NVME_SC_CAP_EXCEEDED:
	case NVME_SC_AWU_EXCEEDED:
		return ENOSPC;
	}
	return EIO;
}

static inline __u8 nvme_cmd_specific_status_to_errno(__u16 status)
{
	switch (status) {
	case NVME_SC_CQ_INVALID:
	case NVME_SC_QID_INVALID:
	case NVME_SC_QUEUE_SIZE:
	case NVME_SC_FIRMWARE_SLOT:
	case NVME_SC_FIRMWARE_IMAGE:
	case NVME_SC_INVALID_VECTOR:
	case NVME_SC_INVALID_LOG_PAGE:
	case NVME_SC_INVALID_FORMAT:
	case NVME_SC_INVALID_QUEUE:
	case NVME_SC_NS_INSUFFICIENT_CAP:
	case NVME_SC_NS_ID_UNAVAILABLE:
	case NVME_SC_CTRL_LIST_INVALID:
	case NVME_SC_BAD_ATTRIBUTES:
	case NVME_SC_INVALID_PI:
	case NVME_SC_INVALID_CTRL_ID:
	case NVME_SC_INVALID_SEC_CTRL_STATE:
	case NVME_SC_INVALID_CTRL_RESOURCES:
	case NVME_SC_INVALID_RESOURCE_ID:
	case NVME_SC_ANA_GROUP_ID_INVALID:
	case NVME_SC_INSUFFICIENT_CAP:
	case NVME_SC_INVALID_IOCS:
	case NVME_SC_ID_UNAVAILABLE:
		return EINVAL;
	case NVME_SC_ABORT_LIMIT:
	case NVME_SC_ASYNC_LIMIT:
	case NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED:
		return EDQUOT;
	case NVME_SC_FW_NEEDS_CONV_RESET:
	case NVME_SC_FW_NEEDS_SUBSYS_RESET:
	case NVME_SC_FW_NEEDS_MAX_TIME:
	case NVME_SC_FW_NEEDS_RESET:
		return ERESTART;
	case NVME_SC_FEATURE_NOT_SAVEABLE:
	case NVME_SC_FEATURE_NOT_CHANGEABLE:
	case NVME_SC_FEATURE_NOT_PER_NS:
	case NVME_SC_FW_ACTIVATE_PROHIBITED:
	case NVME_SC_NS_IS_PRIVATE:
	case NVME_SC_BP_WRITE_PROHIBITED:
	case NVME_SC_READ_ONLY:
	case NVME_SC_PMR_SAN_PROHIBITED:
		return EPERM;
	case NVME_SC_OVERLAPPING_RANGE:
	case NVME_SC_NS_NOT_ATTACHED:
		return ENOSPC;
	case NVME_SC_NS_ALREADY_ATTACHED:
		return EALREADY;
	case NVME_SC_THIN_PROV_NOT_SUPP:
	case NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED:
		return EOPNOTSUPP;
	case NVME_SC_ABORT_MISSING:
		return EWOULDBLOCK;
	case NVME_SC_SELF_TEST_IN_PROGRESS:
		return EINPROGRESS;
	}

	return EIO;
}

static inline __u8 nvme_fabrics_status_to_errno(__u16 status)
{
	switch (status) {
	case NVME_SC_CONNECT_FORMAT:
	case NVME_SC_CONNECT_INVALID_PARAM:
	case NVME_SC_DISCONNECT_INVALID_QTYPE:
		return EINVAL;
	case NVME_SC_CONNECT_CTRL_BUSY:
		return EBUSY;
	case NVME_SC_CONNECT_RESTART_DISC:
		return ERESTART;
	case NVME_SC_CONNECT_INVALID_HOST:
		return ECONNREFUSED;
	case NVME_SC_DISCOVERY_RESTART:
		return EAGAIN;
	case NVME_SC_AUTH_REQUIRED:
		return EPERM;
	}

	return EIO;
}

__u8 nvme_status_to_errno(int status, bool fabrics)
{
	__u16 sc;

	if (!status)
		return 0;
	if (status < 0)
		return errno;

	sc = nvme_status_code(status);
	switch (nvme_status_code_type(status)) {
	case NVME_SCT_GENERIC:
		return nvme_generic_status_to_errno(sc);
	case NVME_SCT_CMD_SPECIFIC:
		if  (fabrics)
			return nvme_fabrics_status_to_errno(sc);
		return nvme_cmd_specific_status_to_errno(sc);
	default:
		return EIO;
	}
}

static const char * const generic_status[] = {
	[NVME_SC_SUCCESS]			  = "Successful Completion: The command completed without error",
	[NVME_SC_INVALID_OPCODE]		  = "Invalid Command Opcode: A reserved coded value or an unsupported value in the command opcode field",
	[NVME_SC_INVALID_FIELD]			  = "Invalid Field in Command: A reserved coded value or an unsupported value in a defined field",
	[NVME_SC_CMDID_CONFLICT]		  = "Command ID Conflict: The command identifier is already in use",
	[NVME_SC_DATA_XFER_ERROR]		  = "Data Transfer Error: Transferring the data or metadata associated with a command experienced an error",
	[NVME_SC_POWER_LOSS]			  = "Commands Aborted due to Power Loss Notification: Indicates that the command was aborted due to a power loss notification",
	[NVME_SC_INTERNAL]			  = "Internal Error: The command was not completed successfully due to an internal error",
	[NVME_SC_ABORT_REQ]			  = "Command Abort Requested: The command was aborted due to an Abort command",
	[NVME_SC_ABORT_QUEUE]			  = "Command Aborted due to SQ Deletion: The command was aborted due to a Delete I/O Submission Queue",
	[NVME_SC_FUSED_FAIL]			  = "Command Aborted due to Failed Fused Command: The command was aborted due to the other command in a fused operation failing",
	[NVME_SC_FUSED_MISSING]			  = "Command Aborted due to Missing Fused Command: The fused command was aborted due to the adjacent submission queue entry not containing a fused command",
	[NVME_SC_INVALID_NS]			  = "Invalid Namespace or Format: The namespace or the format of that namespace is invalid",
	[NVME_SC_CMD_SEQ_ERROR]			  = "Command Sequence Error: The command was aborted due to a protocol violation in a multi- command sequence",
	[NVME_SC_SGL_INVALID_LAST]		  = "Invalid SGL Segment Descriptor: The command includes an invalid SGL Last Segment or SGL Segment descriptor",
	[NVME_SC_SGL_INVALID_COUNT]		  = "Invalid Number of SGL Descriptors: There is an SGL Last Segment descriptor or an SGL Segment descriptor in a location other than the last descriptor of a segment based on the length indicated",
	[NVME_SC_SGL_INVALID_DATA]		  = "Data SGL Length Invalid: The length of a Data SGL is too short or too long and the controller does not support SGL transfers longer than the amount of data to be transferred",
	[NVME_SC_SGL_INVALID_METADATA]		  = "Metadata SGL Length Invalid: The length of a Metadata SGL is too short or too long and the controller does not support SGL transfers longer than the amount of data to be transferred",
	[NVME_SC_SGL_INVALID_TYPE]		  = "SGL Descriptor Type Invalid: The type of an SGL Descriptor is a type that is not supported by the controller",
	[NVME_SC_CMB_INVALID_USE]		  = "Invalid Use of Controller Memory Buffer: The attempted use of the Controller Memory Buffer is not supported by the controller",
	[NVME_SC_PRP_INVALID_OFFSET]		  = "PRP Offset Invalid: The Offset field for a PRP entry is invalid",
	[NVME_SC_AWU_EXCEEDED]			  = "Atomic Write Unit Exceeded: The length specified exceeds the atomic write unit size",
	[NVME_SC_OP_DENIED]			  = "Operation Denied: The command was denied due to lack of access rights",
	[NVME_SC_SGL_INVALID_OFFSET]		  = "SGL Offset Invalid: The offset specified in a descriptor is invalid",
	[NVME_SC_HOSTID_FORMAT]			  = "Host Identifier Inconsistent Format: The NVM subsystem detected the simultaneous use of 64- bit and 128-bit Host Identifier values on different controllers",
	[NVME_SC_KAT_EXPIRED]			  = "Keep Alive Timer Expired: The Keep Alive Timer expired",
	[NVME_SC_KAT_INVALID]			  = "Keep Alive Timeout Invalid: The Keep Alive Timeout value specified is invalid",
	[NVME_SC_CMD_ABORTED_PREMEPT]		  = "Command Aborted due to Preempt and Abort: The command was aborted due to a Reservation Acquire command",
	[NVME_SC_SANITIZE_FAILED]		  = "Sanitize Failed: The most recent sanitize operation failed and no recovery action has been successfully completed",
	[NVME_SC_SANITIZE_IN_PROGRESS]		  = "Sanitize In Progress: The requested function is prohibited while a sanitize operation is in progress",
	[NVME_SC_SGL_INVALID_GRANULARITY]	  = "SGL Data Block Granularity Invalid: The Address alignment or Length granularity for an SGL Data Block descriptor is invalid",
	[NVME_SC_CMD_IN_CMBQ_NOT_SUPP]		  = "Command Not Supported for Queue in CMB: The controller does not support Submission Queue in the Controller Memory Buffer or Completion Queue in the Controller Memory Buffer",
	[NVME_SC_NS_WRITE_PROTECTED]		  = "Namespace is Write Protected: The command is prohibited while the namespace is write protected",
	[NVME_SC_CMD_INTERRUPTED]		  = "Command Interrupted: Command processing was interrupted and the controller is unable to successfully complete the command",
	[NVME_SC_TRAN_TPORT_ERROR]		  = "Transient Transport Error: A transient transport error was detected",
	[NVME_SC_PROHIBITED_BY_CMD_AND_FEAT]	  = "Command Prohibited by Command and Feature Lockdown: The command was aborted due to command execution being prohibited by the Command and Feature Lockdown",
	[NVME_SC_ADMIN_CMD_MEDIA_NOT_READY]	  = "Admin Command Media Not Ready: The Admin command requires access to media and the media is not ready",
	[NVME_SC_LBA_RANGE]			  = "LBA Out of Range: The command references an LBA that exceeds the size of the namespace",
	[NVME_SC_CAP_EXCEEDED]			  = "Capacity Exceeded: Execution of the command has caused the capacity of the namespace to be exceeded",
	[NVME_SC_NS_NOT_READY]			  = "Namespace Not Ready: The namespace is not ready to be accessed",
	[NVME_SC_RESERVATION_CONFLICT]		  = "Reservation Conflict: The command was aborted due to a conflict with a reservation held on the accessed namespace",
	[NVME_SC_FORMAT_IN_PROGRESS]		  = "Format In Progress: A Format NVM command is in progress on the namespace",
};

static const char * const cmd_spec_status[] = {
	[NVME_SC_CQ_INVALID]			  = "Completion Queue Invalid: The Completion Queue identifier specified in the command does not exist",
	[NVME_SC_QID_INVALID]			  = "Invalid Queue Identifier: The creation of the I/O Completion Queue failed due to an invalid queue identifier specified as part of the command",
	[NVME_SC_QUEUE_SIZE]			  = "Invalid Queue Size: The host attempted to create an I/O Completion Queue with an invalid number of entries",
	[NVME_SC_ABORT_LIMIT]			  = "Abort Command Limit Exceeded: The number of concurrently outstanding Abort commands has exceeded the limit indicated in the Identify Controller data structure",
	[NVME_SC_ABORT_MISSING]			  = "Abort Command Is Missing: The abort command is missing",
	[NVME_SC_ASYNC_LIMIT]			  = "Asynchronous Event Request Limit Exceeded: The number of concurrently outstanding Asynchronous Event Request commands has been exceeded",
	[NVME_SC_FIRMWARE_SLOT]			  = "Invalid Firmware Slot: The firmware slot indicated is invalid or read only",
	[NVME_SC_FIRMWARE_IMAGE]		  = "Invalid Firmware Image: The firmware image specified for activation is invalid and not loaded by the controller",
	[NVME_SC_INVALID_VECTOR]		  = "Invalid Interrupt Vector: The creation of the I/O Completion Queue failed due to an invalid interrupt vector specified as part of the command",
	[NVME_SC_INVALID_LOG_PAGE]		  = "Invalid Log Page: The log page indicated is invalid",
	[NVME_SC_INVALID_FORMAT]		  = "Invalid Format: The LBA Format specified is not supported",
	[NVME_SC_FW_NEEDS_CONV_RESET]		  = "Firmware Activation Requires Conventional Reset: The firmware commit was successful, however, activation of the firmware image requires a conventional reset",
	[NVME_SC_INVALID_QUEUE]			  = "Invalid Queue Deletion: Invalid I/O Completion Queue specified to delete",
	[NVME_SC_FEATURE_NOT_SAVEABLE]		  = "Feature Identifier Not Saveable: The Feature Identifier specified does not support a saveable value",
	[NVME_SC_FEATURE_NOT_CHANGEABLE]	  = "Feature Not Changeable: The Feature Identifier is not able to be changed",
	[NVME_SC_FEATURE_NOT_PER_NS]		  = "Feature Not Namespace Specific: The Feature Identifier specified is not namespace specific",
	[NVME_SC_FW_NEEDS_SUBSYS_RESET]		  = "Firmware Activation Requires NVM Subsystem Reset: The firmware commit was successful, however, activation of the firmware image requires an NVM Subsystem",
	[NVME_SC_FW_NEEDS_RESET]		  = "Firmware Activation Requires Controller Level Reset: The firmware commit was successful; however, the image specified does not support being activated without a reset",
	[NVME_SC_FW_NEEDS_MAX_TIME]		  = "Firmware Activation Requires Maximum Time Violation: The image specified if activated immediately would exceed the Maximum Time for Firmware Activation (MTFA) value reported in Identify Controller",
	[NVME_SC_FW_ACTIVATE_PROHIBITED]	  = "Firmware Activation Prohibited: The image specified is being prohibited from activation by the controller for vendor specific reasons",
	[NVME_SC_OVERLAPPING_RANGE]		  = "Overlapping Range: The downloaded firmware image has overlapping ranges",
	[NVME_SC_NS_INSUFFICIENT_CAP]		  = "Namespace Insufficient Capacity: Creating the namespace requires more free space than is currently available",
	[NVME_SC_NS_ID_UNAVAILABLE]		  = "Namespace Identifier Unavailable: The number of namespaces supported has been exceeded",
	[NVME_SC_NS_ALREADY_ATTACHED]		  = "Namespace Already Attached: The controller is already attached to the namespace specified",
	[NVME_SC_NS_IS_PRIVATE]			  = "Namespace Is Private: The namespace is private and is already attached to one controller",
	[NVME_SC_NS_NOT_ATTACHED]		  = "Namespace Not Attached: The request to detach the controller could not be completed because the controller is not attached to the namespace",
	[NVME_SC_THIN_PROV_NOT_SUPP]		  = "Thin Provisioning Not Supported: Thin provisioning is not supported by the controller",
	[NVME_SC_CTRL_LIST_INVALID]		  = "Controller List Invalid: The controller list provided contains invalid controller ids",
	[NVME_SC_SELF_TEST_IN_PROGRESS]		  = "Device Self-test In Progress: The controller or NVM subsystem already has a device self-test operation in process",
	[NVME_SC_BP_WRITE_PROHIBITED]		  = "Boot Partition Write Prohibited: The command tried to modify a locked Boot Partition",
	[NVME_SC_INVALID_CTRL_ID]		  = "Invalid Controller Identifier: An invalid controller id was specified",
	[NVME_SC_INVALID_SEC_CTRL_STATE]	  = "Invalid Secondary Controller State: The requested secondary controller action is invalid based on the secondary and primary controllers current states",
	[NVME_SC_INVALID_CTRL_RESOURCES]	  = "Invalid Number of Controller Resources: The specified number of Flexible Resources is invalid",
	[NVME_SC_INVALID_RESOURCE_ID]		  = "Invalid Resource Identifier: At least one of the specified resource identifiers was invalid",
	[NVME_SC_PMR_SAN_PROHIBITED]		  = "Sanitize Prohibited While Persistent Memory Region is Enabled",
	[NVME_SC_ANA_GROUP_ID_INVALID]		  = "ANA Group Identifier Invalid: The specified ANA Group Identifier (ANAGRPID) is not supported in the submitted command",
	[NVME_SC_ANA_ATTACH_FAILED]		  = "ANA Attach Failed: The controller is not attached to the namespace as a result of an ANA condition",
	[NVME_SC_INSUFFICIENT_CAP]		  = "Insufficient Capacity: Requested operation requires more free space than is currently available",
	[NVME_SC_NS_ATTACHMENT_LIMIT_EXCEEDED]	  = "Namespace Attachment Limit Exceeded: Attaching the ns to a controller causes max number of ns attachments allowed to be exceeded",
	[NVME_SC_PROHIBIT_CMD_EXEC_NOT_SUPPORTED] = "Prohibition of Command Execution Not Supported",
	[NVME_SC_IOCS_NOT_SUPPORTED]		  = "The I/O command set is not supported",
	[NVME_SC_IOCS_NOT_ENABLED]		  = "The I/O command set is not enabled",
	[NVME_SC_IOCS_COMBINATION_REJECTED]	  = "The I/O command set combination is rejected",
	[NVME_SC_INVALID_IOCS]			  = "The I/O command set is invalid",
	[NVME_SC_ID_UNAVAILABLE]		  = "Identifier Unavailable: The number of Endurance Groups or NVM Sets supported has been exceeded",
	[NVME_SC_INVALID_DISCOVERY_INFO]	  = "Discovery Info Entry not applicable to selected entity",
	[NVME_SC_ZONING_DATA_STRUCT_LOCKED]       = "The requested Zoning data structure is locked on the CDC",
	[NVME_SC_ZONING_DATA_STRUCT_NOTFND]       = "The requested Zoning data structure does not exist on the CDC",
	[NVME_SC_INSUFFICIENT_DISC_RES]		  = "Discovery Info entries exceed Discovery Controller's capacity",
	[NVME_SC_REQSTD_FUNCTION_DISABLED]        = "Fabric Zoning is not enabled on the CDC",
	[NVME_SC_ZONEGRP_ORIGINATOR_INVLD]        = "The NQN contained in the ZoneGroup Originator field does not match the Host NQN used by the DDC to connect to the CDC",
};

static const char * const nvm_status[] = {
	[NVME_SC_BAD_ATTRIBUTES]		 = "Conflicting Attributes: The attributes specified in the command are conflicting",
	[NVME_SC_INVALID_PI]			 = "Invalid Protection Information: The command's Protection Information Field settings are invalid for the namespace's Protection Information format",
	[NVME_SC_READ_ONLY]			 = "Attempted Write to Read Only Range: The LBA range specified contains read-only blocks",
	[NVME_SC_CMD_SIZE_LIMIT_EXCEEDED]	 = "Command Size Limit Exceeded",
	[NVME_SC_ZNS_INVALID_OP_REQUEST]	 = "Invalid Zone Operation Request: The operation requested is invalid",
	[NVME_SC_ZNS_ZRWA_RESOURCES_UNAVAILABLE] = "ZRWA Resources Unavailable: No ZRWAs are available",
	[NVME_SC_ZNS_BOUNDARY_ERROR]		 = "Zoned Boundary Error: Invalid Zone Boundary crossing",
	[NVME_SC_ZNS_FULL]			 = "Zone Is Full: The accessed zone is in ZSF:Full state",
	[NVME_SC_ZNS_READ_ONLY]			 = "Zone Is Read Only: The accessed zone is in ZSRO:Read Only state",
	[NVME_SC_ZNS_OFFLINE]			 = "Zone Is Offline: The access zone is in ZSO:Offline state",
	[NVME_SC_ZNS_INVALID_WRITE]		 = "Zone Invalid Write: The write to zone was not at the write pointer offset",
	[NVME_SC_ZNS_TOO_MANY_ACTIVE]		 = "Too Many Active Zones: The controller does not allow additional active zones",
	[NVME_SC_ZNS_TOO_MANY_OPENS]		 = "Too Many Open Zones: The controller does not allow additional open zones",
	[NVME_SC_ZNS_INVAL_TRANSITION]		 = "Invalid Zone State Transition: The request is not a valid zone state transition",
};

static const char * const nvmf_status[] = {
	[NVME_SC_CONNECT_FORMAT]	   = "Incompatible Format: The NVM subsystem does not support the record format specified by the host",
	[NVME_SC_CONNECT_CTRL_BUSY]	   = "Controller Busy: The controller is already associated with a host",
	[NVME_SC_CONNECT_INVALID_PARAM]    = "Connect Invalid Parameters: One or more of the command parameters",
	[NVME_SC_CONNECT_RESTART_DISC]	   = "Connect Restart Discovery: The NVM subsystem requested is not available",
	[NVME_SC_CONNECT_INVALID_HOST]	   = "Connect Invalid Host: The host is not allowed to establish an association to either any controller in the NVM subsystem or the specified controller",
	[NVME_SC_DISCONNECT_INVALID_QTYPE] = "Invalid Queue Type: The command was sent on the wrong queue type",
	[NVME_SC_DISCOVERY_RESTART]	   = "Discover Restart: The snapshot of the records is now invalid or out of date",
	[NVME_SC_AUTH_REQUIRED]		   = "Authentication Required: NVMe in-band authentication is required and the queue has not yet been authenticated",
};

static const char * const media_status[] = {
	[NVME_SC_WRITE_FAULT]		 = "Write Fault: The write data could not be committed to the media",
	[NVME_SC_READ_ERROR]		 = "Unrecovered Read Error: The read data could not be recovered from the media",
	[NVME_SC_GUARD_CHECK]		 = "End-to-end Guard Check Error: The command was aborted due to an end-to-end guard check failure",
	[NVME_SC_APPTAG_CHECK]		 = "End-to-end Application Tag Check Error: The command was aborted due to an end-to-end application tag check failure",
	[NVME_SC_REFTAG_CHECK]		 = "End-to-end Reference Tag Check Error: The command was aborted due to an end-to-end reference tag check failure",
	[NVME_SC_COMPARE_FAILED]	 = "Compare Failure: The command failed due to a miscompare during a Compare command",
	[NVME_SC_ACCESS_DENIED]		 = "Access Denied: Access to the namespace and/or LBA range is denied due to lack of access rights",
	[NVME_SC_UNWRITTEN_BLOCK]	 = "Deallocated or Unwritten Logical Block: The command failed due to an attempt to read from or verify an LBA range containing a deallocated or unwritten logical block",
	[NVME_SC_STORAGE_TAG_CHECK]	 = "End-to-End Storage Tag Check Error: The command was aborted due to an end-to-end storage tag check failure",
};

static const char * const path_status[] = {
	[NVME_SC_ANA_INTERNAL_PATH_ERROR] = "Internal Path Error: An internal error specific to the controller processing the commmand prevented completion",
	[NVME_SC_ANA_PERSISTENT_LOSS]	  = "Asymmetric Access Persistent Loss: The controller is in a persistent loss state with the requested namespace",
	[NVME_SC_ANA_INACCESSIBLE]	  = "Asymmetric Access Inaccessible: The controller is in an inaccessible state with the requested namespace",
	[NVME_SC_ANA_TRANSITION]	  = "Asymmetric Access Transition: The controller is currently transitioning states with the requested namespace",
	[NVME_SC_CTRL_PATH_ERROR]	  = "Controller Pathing Error: A pathing error was detected by the controller",
	[NVME_SC_HOST_PATH_ERROR]	  = "Host Pathing Error: A pathing error was detected by the host",
	[NVME_SC_CMD_ABORTED_BY_HOST]	  = "Command Aborted By Host: The command was aborted as a result of host action",
};

#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
#define ARGSTR(s, i) arg_str(s, ARRAY_SIZE(s), i)

static const char *arg_str(const char * const *strings,
		size_t array_size, size_t idx)
{
	if (idx < array_size && strings[idx])
		return strings[idx];
	return "unrecognized";
}

const char *nvme_status_to_string(int status, bool fabrics)
{
	const char *s = "Unknown status";
	__u16 sc, sct;

	if (status < 0)
		return strerror(errno);

	sc = nvme_status_code(status);
	sct = nvme_status_code_type(status);

	switch (sct) {
	case NVME_SCT_GENERIC:
		s = ARGSTR(generic_status, sc);
		break;
	case NVME_SCT_CMD_SPECIFIC:
		if (sc < ARRAY_SIZE(cmd_spec_status))
			s = ARGSTR(cmd_spec_status, sc);
		else if (fabrics)
			s = ARGSTR(nvmf_status, sc);
		else
			s = ARGSTR(nvm_status, sc);
		break;
	case NVME_SCT_MEDIA:
		s = ARGSTR(media_status, sc);
		break;
	case NVME_SCT_PATH:
		s = ARGSTR(path_status, sc);
		break;
	case NVME_SCT_VS:
		s = "Vendor Specific Status";
		break;
	default:
		break;
	}

	return s;
}

void nvme_init_copy_range(struct nvme_copy_range *copy, __u16 *nlbs,
			  __u64 *slbas, __u32 *eilbrts, __u32 *elbatms,
			  __u32 *elbats, __u16 nr)
{
	int i;

	for (i = 0; i < nr; i++) {
		copy[i].nlb = cpu_to_le16(nlbs[i]);
		copy[i].slba = cpu_to_le64(slbas[i]);
		copy[i].eilbrt = cpu_to_le32(eilbrts[i]);
		copy[i].elbatm = cpu_to_le16(elbatms[i]);
		copy[i].elbat = cpu_to_le16(elbats[i]);
	}
}

void nvme_init_dsm_range(struct nvme_dsm_range *dsm, __u32 *ctx_attrs,
			 __u32 *llbas, __u64 *slbas, __u16 nr_ranges)
{
	int i;

	for (i = 0; i < nr_ranges; i++) {
		dsm[i].cattr = cpu_to_le32(ctx_attrs[i]);
		dsm[i].nlb = cpu_to_le32(llbas[i]);
		dsm[i].slba = cpu_to_le64(slbas[i]);
	}
}

void nvme_init_ctrl_list(struct nvme_ctrl_list *cntlist, __u16 num_ctrls,
			  __u16 *ctrlist)
{
	int i;

	cntlist->num = cpu_to_le16(num_ctrls);
	for (i = 0; i < num_ctrls; i++)
		cntlist->identifier[i] = cpu_to_le16(ctrlist[i]);
}

int nvme_get_feature_length(int fid, __u32 cdw11, __u32 *len)
{
	switch (fid) {
	case NVME_FEAT_FID_LBA_RANGE:
		*len = sizeof(struct nvme_lba_range_type);
		break;
	case NVME_FEAT_FID_AUTO_PST:
		*len = sizeof(struct nvme_feat_auto_pst);
		break;
	case NVME_FEAT_FID_PLM_CONFIG:
		*len = sizeof(struct nvme_plm_config);
		break;
	case NVME_FEAT_FID_TIMESTAMP:
		*len = sizeof(struct nvme_timestamp);
		break;
	case NVME_FEAT_FID_HOST_BEHAVIOR:
		*len = sizeof(struct nvme_feat_host_behavior);
		break;
	case NVME_FEAT_FID_HOST_ID:
		*len = (cdw11 & 0x1) ? 16 : 8;
		break;
	case NVME_FEAT_FID_ARBITRATION:
	case NVME_FEAT_FID_POWER_MGMT:
	case NVME_FEAT_FID_TEMP_THRESH:
	case NVME_FEAT_FID_ERR_RECOVERY:
	case NVME_FEAT_FID_VOLATILE_WC:
	case NVME_FEAT_FID_NUM_QUEUES:
	case NVME_FEAT_FID_IRQ_COALESCE:
	case NVME_FEAT_FID_IRQ_CONFIG:
	case NVME_FEAT_FID_WRITE_ATOMIC:
	case NVME_FEAT_FID_ASYNC_EVENT:
	case NVME_FEAT_FID_HOST_MEM_BUF:
	case NVME_FEAT_FID_KATO:
	case NVME_FEAT_FID_HCTM:
	case NVME_FEAT_FID_NOPSC:
	case NVME_FEAT_FID_RRL:
	case NVME_FEAT_FID_PLM_WINDOW:
	case NVME_FEAT_FID_LBA_STS_INTERVAL:
	case NVME_FEAT_FID_SANITIZE:
	case NVME_FEAT_FID_ENDURANCE_EVT_CFG:
	case NVME_FEAT_FID_SW_PROGRESS:
	case NVME_FEAT_FID_RESV_MASK:
	case NVME_FEAT_FID_RESV_PERSIST:
	case NVME_FEAT_FID_WRITE_PROTECT:
		*len = 0;
		break;
	case NVME_FEAT_FID_ENH_CTRL_METADATA:
	case NVME_FEAT_FID_CTRL_METADATA:
	case NVME_FEAT_FID_NS_METADATA:
		*len = sizeof(struct nvme_host_metadata);
		break;
	default:
		errno = EINVAL;
		return -1;
	}
	return 0;
}

int nvme_get_directive_receive_length(enum nvme_directive_dtype dtype,
		enum nvme_directive_receive_doper doper, __u32 *len)
{
	switch (dtype) {
	case NVME_DIRECTIVE_DTYPE_IDENTIFY:
		switch (doper) {
		case NVME_DIRECTIVE_RECEIVE_IDENTIFY_DOPER_PARAM:
			*len = sizeof(struct nvme_id_directives);
			return 0;
		default:
			errno = EINVAL;
			return -1;
		}
	case NVME_DIRECTIVE_DTYPE_STREAMS:
		switch (doper) {
		case NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_PARAM:
			*len = sizeof(struct nvme_streams_directive_params);
			return 0;
		case NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_STATUS:
			*len = (128 * 1024) * sizeof(__le16);
			return 0;
		case NVME_DIRECTIVE_RECEIVE_STREAMS_DOPER_RESOURCE:
			*len = 0;
			return 0;
		default:
			errno = EINVAL;
			return -1;
		}
	default:
		errno = EINVAL;
		return -1;
	}
}

static const char * const libnvme_status[] = {
	[ENVME_CONNECT_RESOLVE] = "failed to resolve host",
	[ENVME_CONNECT_ADDRFAM] = "unrecognized address family",
	[ENVME_CONNECT_TRADDR] = "failed to get transport address",
	[ENVME_CONNECT_TARG] = "no transport specified",
	[ENVME_CONNECT_AARG] = "no transport address specified",
	[ENVME_CONNECT_OPEN] = "failed to open nvme-fabrics device",
	[ENVME_CONNECT_WRITE] = "failed to write to nvme-fabrics device",
	[ENVME_CONNECT_READ] = "failed to read from nvme-fabrics device",
	[ENVME_CONNECT_PARSE] = "failed to parse ctrl info",
	[ENVME_CONNECT_INVAL_TR] = "invalid transport type",
	[ENVME_CONNECT_LOOKUP_SUBSYS_NAME] = "failed to lookup subsystem name",
	[ENVME_CONNECT_LOOKUP_SUBSYS] = "failed to lookup subsystem",
};

const char *nvme_errno_to_string(int status)
{
	const char *s = ARGSTR(libnvme_status, status);

	return s;
}

char *hostname2traddr(struct nvme_root *r, const char *traddr)
{
	struct addrinfo *host_info, hints = {.ai_family = AF_UNSPEC};
	char addrstr[NVMF_TRADDR_SIZE];
	const char *p;
	char *ret_traddr = NULL;
	int ret;

	ret = getaddrinfo(traddr, NULL, &hints, &host_info);
	if (ret) {
		nvme_msg(r, LOG_ERR, "failed to resolve host %s info\n",
			 traddr);
		return NULL;
	}

	switch (host_info->ai_family) {
	case AF_INET:
		p = inet_ntop(host_info->ai_family,
			&(((struct sockaddr_in *)host_info->ai_addr)->sin_addr),
			addrstr, NVMF_TRADDR_SIZE);
		break;
	case AF_INET6:
		p = inet_ntop(host_info->ai_family,
			&(((struct sockaddr_in6 *)host_info->ai_addr)->sin6_addr),
			addrstr, NVMF_TRADDR_SIZE);
		break;
	default:
		nvme_msg(r, LOG_ERR, "unrecognized address family (%d) %s\n",
			 host_info->ai_family, traddr);
		goto free_addrinfo;
	}

	if (!p) {
		nvme_msg(r, LOG_ERR, "failed to get traddr for %s\n",
			 traddr);
		goto free_addrinfo;
	}
	ret_traddr = strdup(addrstr);

free_addrinfo:
	freeaddrinfo(host_info);
	return ret_traddr;
}

char *startswith(const char *s, const char *prefix)
{
	size_t l;

	l = strlen(prefix);
	if (!strncmp(s, prefix, l))
		return (char *)s + l;

	return NULL;
}

char *kv_strip(char *kv)
{
	char *s;

	kv[strcspn(kv, "\n\r")] = '\0';

	/* Remove leading newline and spaces */
	kv += strspn(kv, " \t\n\r");

	/* Skip comments and empty lines */
	if (*kv == '#' || *kv == '\0') {
		*kv = '\0';
		return kv;
	}

	/* Remove trailing newline chars */
	kv[strcspn(kv, "\n\r")] = '\0';

	/* Delete trailing comments (including spaces/tabs that precede the #)*/
	s = &kv[strcspn(kv, "#")];
	*s-- = '\0';
	while ((s >= kv) && ((*s == ' ') || (*s == '\t'))) {
		*s-- = '\0';
	}

	return kv;
}

char *kv_keymatch(const char *kv, const char *key)
{
	char *value;

	value = startswith(kv, key);
	if (value) {
		/* Make sure key is a whole word.  I.e. it should be
		 * followed by spaces, tabs, or a equal sign. Skip
		 * leading spaces, tabs, and equal sign (=) */
		switch (*value) {
		case ' ':
		case '\t':
		case '=':
			value += strspn(value, " \t=");
			return value;
		default: ;
		}
	}

	return NULL;
}

/**
 * read_file - read contents of file into @buffer.
 * @fname:  File name
 * @buffer: Where to save file's contents
 * @bufsz:  Size of @buffer. On success, @bufsz gets decremented by the
 *          number of characters that were writtent to @buffer.
 *
 * Return: The number of characters read. If the file cannot be opened or
 * nothing is read from the file, then this function returns 0.
 */
static size_t read_file(const char * fname, char *buffer, size_t *bufsz)
{
	char   *p;
	FILE   *file;
	size_t len;

	file = fopen(fname, "re");
	if (!file)
		return 0;

	p = fgets(buffer, *bufsz, file);
	fclose(file);

	if (!p)
		return 0;

	 /* Strip unwanted trailing chars */
	len = strcspn(buffer, " \t\n\r");
	*bufsz -= len;

	return len;
}

static size_t copy_value(char *buf, size_t buflen, const char *value)
{
	size_t val_len;

	memset(buf, 0, buflen);

	/* Remove leading " */
	if (value[0] == '"')
		value++;

	 /* Remove trailing " */
	val_len = strcspn(value, "\"");

	memcpy(buf, value, MIN(val_len, buflen-1));

	return val_len;
}

size_t get_entity_name(char *buffer, size_t bufsz)
{
	size_t len = !gethostname(buffer, bufsz) ? strlen(buffer) : 0;

	/* Fill the rest of buffer with zeros */
	memset(&buffer[len], '\0', bufsz-len);

	return len;
}

size_t get_entity_version(char *buffer, size_t bufsz)
{
	FILE    *file;
	size_t  num_bytes = 0;

	/* /proc/sys/kernel/ostype typically contains the string "Linux" */
	num_bytes += read_file("/proc/sys/kernel/ostype",
			       &buffer[num_bytes], &bufsz);

	/* /proc/sys/kernel/osrelease contains the Linux
	 * version (e.g. 5.8.0-63-generic)
	 */
	buffer[num_bytes++] = ' '; /* Append a space */
	num_bytes += read_file("/proc/sys/kernel/osrelease",
			       &buffer[num_bytes], &bufsz);

	/* /etc/os-release contains Key-Value pairs. We only care about the key
	 * PRETTY_NAME, which contains the Distro's version. For example:
	 * "SUSE Linux Enterprise Server 15 SP4", "Ubuntu 20.04.3 LTS", or
	 * "Fedora Linux 35 (Server Edition)"
	 */
	file = fopen("/etc/os-release", "re");
	if (file) {
		char    name[64] = {0};
		size_t  name_len = 0;
		char    ver_id[64] = {0};
		size_t  ver_id_len = 0;
		char    line[LINE_MAX];
		char    *p;
		char    *s;

		/* Read key-value pairs one line at a time */
		while ((!name_len || !ver_id_len) &&
		       (p = fgets(line, sizeof(line), file)) != NULL) {
			/* Clean up string by removing leading/trailing blanks
			 * and new line characters. Also eliminate trailing
			 * comments, if any.
			 */
			p = kv_strip(p);

			 /* Empty string? */
			if (*p == '\0')
				continue;

			s = kv_keymatch(p, "NAME");
			if (s)
				name_len = copy_value(name, sizeof(name), s);

			s = kv_keymatch(p, "VERSION_ID");
			if (s)
				ver_id_len = copy_value(ver_id, sizeof(ver_id), s);
		}
		fclose(file);

		if (name_len) {
			/* Append a space */
			buffer[num_bytes++] = ' ';
			name_len = MIN(name_len, bufsz);
			memcpy(&buffer[num_bytes], name, name_len);
			bufsz -= name_len;
			num_bytes += name_len;
		}

		if (ver_id_len) {
			/* Append a space */
			buffer[num_bytes++] = ' ';
			ver_id_len = MIN(ver_id_len, bufsz);
			memcpy(&buffer[num_bytes], ver_id, ver_id_len);
			bufsz -= ver_id_len;
			num_bytes += ver_id_len;
		}
	}

	/* Fill the rest of buffer with zeros */
	memset(&buffer[num_bytes], '\0', bufsz);

	return num_bytes;
}

struct nvmf_ext_attr *nvmf_exat_ptr_next(struct nvmf_ext_attr *p)
{
	return (struct nvmf_ext_attr *)
		((uintptr_t)p + (ptrdiff_t)nvmf_exat_size(le16_to_cpu(p->exatlen)));
}