Adding upstream version 1.5~rc1.upstream/1.5_rc1

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

11 files changed, 245 insertions, 43 deletions

diff --git a/AUTHORS b/AUTHORS
index fe4a97f..d3cc828 100644
--- a/AUTHORS
+++ b/AUTHORS
@@ -1 +1,7 @@
 Lunzip was written by Antonio Diaz Diaz.
+
+The ideas embodied in lunzip are due to (at least) the following people:
+Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
+the definition of Markov chains), G.N.N. Martin (for the definition of
+range encoding), Igor Pavlov (for putting all the above together in
+LZMA), and Julian Seward (for bzip2's CLI).
diff --git a/ChangeLog b/ChangeLog
index eac5edd..df75519 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2013-10-30  Antonio Diaz Diaz  <antonio@gnu.org>
+
+	* Version 1.5-rc1 released.
+	* main.c: Added new option '-u, --buffer-size' (low memory mode).
+	* main.c (close_and_set_permissions): Behave like 'cp -p'.
+
 2013-09-17  Antonio Diaz Diaz  <antonio@gnu.org>
 
 	* Version 1.4 released.
diff --git a/Makefile.in b/Makefile.in
index 307943b..e04819f 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,8 +1,8 @@
 
 DISTNAME = $(pkgname)-$(pkgversion)
 INSTALL = install
-INSTALL_PROGRAM = $(INSTALL) -p -m 755
-INSTALL_DATA = $(INSTALL) -p -m 644
+INSTALL_PROGRAM = $(INSTALL) -m 755
+INSTALL_DATA = $(INSTALL) -m 644
 INSTALL_DIR = $(INSTALL) -d -m 755
 SHELL = /bin/sh
 
diff --git a/NEWS b/NEWS
index 9ec7370..cefaf2d 100644
--- a/NEWS
+++ b/NEWS
@@ -1,5 +1,6 @@
-Changes in version 1.4:
+Changes in version 1.5:
 
-File version is no more shown in status messages.
+The new option "-u, --buffer-size", which activates a "low memory"
+decompression mode, has been added.
 
-Minor fixes.
+File date, permissions, and ownership are now copied like "cp -p" does.
diff --git a/README b/README
index 182d0c9..a64ac21 100644
--- a/README
+++ b/README
@@ -5,13 +5,23 @@ small size makes it well suited for embedded devices or software
 installers that need to decompress files but do not need compression
 capabilities. Lunzip is fully compatible with lzip-1.4 or newer.
 
+If the size of the output buffer is specified with the "--buffer-size"
+option, lunzip uses the decompressed file as dictionary for distances
+beyond the buffer size and is able to decompress any file using as
+little memory as 50 kB, irrespective of the dictionary size used to
+compress the file. Of course, the smaller the output buffer size used in
+relation to the dictionary size, the more accesses to disk are needed
+and the slower the decompression is. This "low memory" mode only works
+when decompressing to a regular file.
+
 The lzip file format is designed for long-term data archiving. It is
 clean, provides very safe 4 factor integrity checking, and is backed by
 the recovery capabilities of lziprecover.
 
 Lunzip uses the same well-defined exit status values used by lzip and
-bzip2, which makes it safer when used in pipes or scripts than
-decompressors returning ambiguous warning values, like gunzip.
+bzip2, which makes it safer than decompressors returning ambiguous
+warning values (like gunzip) when it is used as a back end for tar or
+zutils.
 
 Lunzip replaces every file given in the command line with a decompressed
 version of itself. Each decompressed file has the same modification
@@ -35,9 +45,15 @@ two or more compressed files. The result is the concatenation of the
 corresponding uncompressed files. Integrity testing of concatenated
 compressed files is also supported.
 
-The amount of memory required by lunzip to decompress a file is only a
-few tens of KiB larger than the dictionary size used to compress that
-file.
+The amount of memory required by lunzip to decompress a file is about
+46 kB larger than the dictionary size used to compress that file, unless
+the "--buffer-size" option is specified.
+
+The ideas embodied in lunzip are due to (at least) the following people:
+Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
+the definition of Markov chains), G.N.N. Martin (for the definition of
+range encoding), Igor Pavlov (for putting all the above together in
+LZMA), and Julian Seward (for bzip2's CLI).
 
 
 Copyright (C) 2010, 2011, 2012, 2013 Antonio Diaz Diaz.
diff --git a/configure b/configure
index 2ad9981..e23fea5 100755
--- a/configure
+++ b/configure
@@ -6,7 +6,7 @@
 # to copy, distribute and modify it.
 
 pkgname=lunzip
-pkgversion=1.4
+pkgversion=1.5-rc1
 progname=lunzip
 srctrigger=doc/${progname}.1
 
diff --git a/decoder.c b/decoder.c
index c079504..369dc86 100644
--- a/decoder.c
+++ b/decoder.c
@@ -87,6 +87,15 @@ static int writeblock( const int fd, const uint8_t * const buf, const int size )
   }
 
 
+int seek_read( const int fd, uint8_t * const buf, const int size,
+               const int offset )
+  {
+  if( lseek( fd, offset, SEEK_END ) >= 0 )
+    return readblock( fd, buf, size );
+  return 0;
+  }
+
+
 bool Rd_read_block( struct Range_decoder * const rdec )
   {
   if( !rdec->at_stream_end )
@@ -193,6 +202,10 @@ int LZd_decode_member( struct LZ_decoder * const decoder,
                        struct Pretty_print * const pp )
   {
   struct Range_decoder * const rdec = decoder->rdec;
+  void (* const copy_block)
+       ( struct LZ_decoder * const decoder, const int distance, int len ) =
+    ( decoder->buffer_size >= decoder->dictionary_size ) ?
+    &LZd_copy_block : &LZd_copy_block2;
   unsigned rep0 = 0;		/* rep[0-3] latest four distances */
   unsigned rep1 = 0;		/* used for efficient coding of */
   unsigned rep2 = 0;		/* repeated distances */
@@ -293,10 +306,10 @@ int LZd_decode_member( struct LZ_decoder * const decoder,
         rep3 = rep2; rep2 = rep1; rep1 = rep0_saved;
         state = St_set_match( state );
         if( rep0 >= (unsigned)decoder->dictionary_size ||
-            ( rep0 >= (unsigned)decoder->pos && !decoder->partial_data_pos ) )
+            rep0 >= LZd_data_position( decoder ) )
           { LZd_flush_data( decoder ); return 1; }
         }
-      LZd_copy_block( decoder, rep0, len );
+      copy_block( decoder, rep0, len );
       }
     }
   LZd_flush_data( decoder );
diff --git a/decoder.h b/decoder.h
index 063511b..118fe23 100644
--- a/decoder.h
+++ b/decoder.h
@@ -85,6 +85,7 @@ static inline void Rd_load( struct Range_decoder * const rdec )
   for( i = 0; i < 5; ++i )
     rdec->code = (rdec->code << 8) | Rd_get_byte( rdec );
   rdec->range = 0xFFFFFFFFU;
+  rdec->code &= rdec->range;	/* make sure that first byte is discarded */
   }
 
 static inline void Rd_normalize( struct Range_decoder * const rdec )
@@ -259,6 +260,9 @@ void LZd_flush_data( struct LZ_decoder * const decoder );
 bool LZd_verify_trailer( struct LZ_decoder * const decoder,
                          struct Pretty_print * const pp );
 
+int seek_read( const int fd, uint8_t * const buf, const int size,
+               const int offset );
+
 static inline uint8_t LZd_get_prev_byte( const struct LZ_decoder * const decoder )
   {
   const int i =
@@ -269,9 +273,14 @@ static inline uint8_t LZd_get_prev_byte( const struct LZ_decoder * const decoder
 static inline uint8_t LZd_get_byte( const struct LZ_decoder * const decoder,
                                     const int distance )
   {
-  int i = decoder->pos - distance - 1;
-  if( i < 0 ) i += decoder->buffer_size;
-  return decoder->buffer[i];
+  uint8_t b;
+  const int i = decoder->pos - distance - 1;
+  if( i >= 0 ) b = decoder->buffer[i];
+  else if( i + decoder->buffer_size >= decoder->pos )
+    b = decoder->buffer[i+decoder->buffer_size];
+  else if( seek_read( decoder->outfd, &b, 1, i - decoder->stream_pos ) != 1 )
+    { show_error( "Seek error", errno, false ); cleanup_and_fail( 1 ); }
+  return b;
   }
 
 static inline void LZd_put_byte( struct LZ_decoder * const decoder,
@@ -300,13 +309,35 @@ static inline void LZd_copy_block( struct LZ_decoder * const decoder,
     }
   }
 
+static inline void LZd_copy_block2( struct LZ_decoder * const decoder,
+                                    const int distance, int len )
+  {
+  if( distance < decoder->buffer_size )		/* block is in buffer */
+    { LZd_copy_block( decoder, distance, len ); return; }
+  if( len < decoder->buffer_size - decoder->pos )	/* no wrap */
+    {
+    const int offset = decoder->pos - decoder->stream_pos - distance - 1;
+    if( len <= -offset )			/* block is in file */
+      {
+      if( seek_read( decoder->outfd, decoder->buffer + decoder->pos, len, offset ) != len )
+        { show_error( "Seek error", errno, false ); cleanup_and_fail( 1 ); }
+      decoder->pos += len;
+      return;
+      }
+    }
+  for( ; len > 0; --len )
+    LZd_put_byte( decoder, LZd_get_byte( decoder, distance ) );
+  }
+
 static inline bool LZd_init( struct LZ_decoder * const decoder,
                              const File_header header,
-                             struct Range_decoder * const rde, const int ofd )
+                             struct Range_decoder * const rde,
+                             const int buffer_size, const int ofd )
   {
   decoder->partial_data_pos = 0;
   decoder->dictionary_size = Fh_get_dictionary_size( header );
-  decoder->buffer_size = max( 65536, decoder->dictionary_size );
+  decoder->buffer_size =
+    min( buffer_size, max( 65536, decoder->dictionary_size ) );
   decoder->buffer = (uint8_t *)malloc( decoder->buffer_size );
   if( !decoder->buffer ) return false;
   decoder->pos = 0;
diff --git a/doc/lunzip.1 b/doc/lunzip.1
index 0d10c1d..76b51e1 100644
--- a/doc/lunzip.1
+++ b/doc/lunzip.1
@@ -1,12 +1,24 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.37.1.
-.TH LUNZIP "1" "September 2013" "Lunzip 1.4" "User Commands"
+.TH LUNZIP "1" "October 2013" "Lunzip 1.5-rc1" "User Commands"
 .SH NAME
 Lunzip \- decompressor for lzip files
 .SH SYNOPSIS
 .B lunzip
 [\fIoptions\fR] [\fIfiles\fR]
 .SH DESCRIPTION
-Lunzip \- Decompressor for lzip files.
+Lunzip is a decompressor for lzip files. It is written in C and its
+small size makes it well suited for embedded devices or software
+installers that need to decompress files but do not need compression
+capabilities. Lunzip is fully compatible with lzip\-1.4 or newer.
+.PP
+If the size of the output buffer is specified with the '\-\-buffer\-size'
+option, lunzip uses the decompressed file as dictionary for distances
+beyond the buffer size and is able to decompress any file using as
+little memory as 50 kB, irrespective of the dictionary size used to
+compress the file. Of course, the smaller the output buffer size used in
+relation to the dictionary size, the more accesses to disk are needed
+and the slower the decompression is. This 'low memory' mode only works
+when decompressing to a regular file.
 .SH OPTIONS
 .TP
 \fB\-h\fR, \fB\-\-help\fR
@@ -36,6 +48,9 @@ suppress all messages
 \fB\-t\fR, \fB\-\-test\fR
 test compressed file integrity
 .TP
+\fB\-u\fR, \fB\-\-buffer\-size=\fR<bytes>
+set output buffer size in bytes
+.TP
 \fB\-v\fR, \fB\-\-verbose\fR
 be verbose (a 2nd \fB\-v\fR gives more)
 .PP
diff --git a/main.c b/main.c
index 1bf2fab..1862ffd 100644
--- a/main.c
+++ b/main.c
@@ -54,6 +54,10 @@
 #include "lzip.h"
 #include "decoder.h"
 
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
 #if CHAR_BIT != 8
 #error "Environments where CHAR_BIT != 8 are not supported."
 #endif
@@ -64,12 +68,6 @@ const char * const program_name = "lunzip";
 const char * const program_year = "2013";
 const char * invocation_name = 0;
 
-#ifdef O_BINARY
-const int o_binary = O_BINARY;
-#else
-const int o_binary = 0;
-#endif
-
 struct { const char * from; const char * to; } const known_extensions[] = {
   { ".lz",  ""     },
   { ".tlz", ".tar" },
@@ -86,7 +84,18 @@ bool delete_output_on_interrupt = false;
 
 static void show_help( void )
   {
-  printf( "%s - Decompressor for lzip files.\n", Program_name );
+  printf( "Lunzip is a decompressor for lzip files. It is written in C and its\n"
+          "small size makes it well suited for embedded devices or software\n"
+          "installers that need to decompress files but do not need compression\n"
+          "capabilities. Lunzip is fully compatible with lzip-1.4 or newer.\n"
+          "\nIf the size of the output buffer is specified with the '--buffer-size'\n"
+          "option, lunzip uses the decompressed file as dictionary for distances\n"
+          "beyond the buffer size and is able to decompress any file using as\n"
+          "little memory as 50 kB, irrespective of the dictionary size used to\n"
+          "compress the file. Of course, the smaller the output buffer size used in\n"
+          "relation to the dictionary size, the more accesses to disk are needed\n"
+          "and the slower the decompression is. This 'low memory' mode only works\n"
+          "when decompressing to a regular file.\n" );
   printf( "\nUsage: %s [options] [files]\n", invocation_name );
   printf( "\nOptions:\n"
           "  -h, --help                 display this help and exit\n"
@@ -98,6 +107,7 @@ static void show_help( void )
           "  -o, --output=<file>        if reading stdin, place the output into <file>\n"
           "  -q, --quiet                suppress all messages\n"
           "  -t, --test                 test compressed file integrity\n"
+          "  -u, --buffer-size=<bytes>  set output buffer size in bytes\n"
           "  -v, --verbose              be verbose (a 2nd -v gives more)\n"
           "If no file names are given, lunzip decompresses from standard input to\n"
           "standard output.\n"
@@ -137,6 +147,73 @@ static void show_header( const File_header header )
   }
 
 
+static unsigned long getnum( const char * const ptr,
+                             const unsigned long llimit,
+                             const unsigned long ulimit )
+  {
+  unsigned long result;
+  char * tail;
+  errno = 0;
+  result = strtoul( ptr, &tail, 0 );
+  if( tail == ptr )
+    {
+    show_error( "Bad or missing numerical argument.", 0, true );
+    exit( 1 );
+    }
+
+  if( !errno && tail[0] )
+    {
+    int factor = ( tail[1] == 'i' ) ? 1024 : 1000;
+    int exponent = 0, i;
+    bool bad_multiplier = false;
+    switch( tail[0] )
+      {
+      case ' ': break;
+      case 'Y': exponent = 8; break;
+      case 'Z': exponent = 7; break;
+      case 'E': exponent = 6; break;
+      case 'P': exponent = 5; break;
+      case 'T': exponent = 4; break;
+      case 'G': exponent = 3; break;
+      case 'M': exponent = 2; break;
+      case 'K': if( factor == 1024 ) exponent = 1; else bad_multiplier = true;
+                break;
+      case 'k': if( factor == 1000 ) exponent = 1; else bad_multiplier = true;
+                break;
+      default : bad_multiplier = true;
+      }
+    if( bad_multiplier )
+      {
+      show_error( "Bad multiplier in numerical argument.", 0, true );
+      exit( 1 );
+      }
+    for( i = 0; i < exponent; ++i )
+      {
+      if( ulimit / factor >= result ) result *= factor;
+      else { errno = ERANGE; break; }
+      }
+    }
+  if( !errno && ( result < llimit || result > ulimit ) ) errno = ERANGE;
+  if( errno )
+    {
+    show_error( "Numerical argument out of limits.", 0, false );
+    exit( 1 );
+    }
+  return result;
+  }
+
+
+static int get_dict_size( const char * const arg )
+  {
+  char * tail;
+  int bits = strtol( arg, &tail, 0 );
+  if( bits >= min_dictionary_bits &&
+      bits <= max_dictionary_bits && *tail == 0 )
+    return ( 1 << bits );
+  return getnum( arg, min_dictionary_size, max_dictionary_size );
+  }
+
+
 static int extension_index( const char * const name )
   {
   int i;
@@ -152,9 +229,9 @@ static int extension_index( const char * const name )
 
 
 static int open_instream( const char * const name, struct stat * const in_statsp,
-                          const bool testing, const bool to_stdout )
+                          const bool no_ofile )
   {
-  int infd = open( name, O_RDONLY | o_binary );
+  int infd = open( name, O_RDONLY | O_BINARY );
   if( infd < 0 )
     {
     if( verbosity >= 0 )
@@ -168,7 +245,6 @@ static int open_instream( const char * const name, struct stat * const in_statsp
     const bool can_read = ( i == 0 &&
                             ( S_ISBLK( mode ) || S_ISCHR( mode ) ||
                               S_ISFIFO( mode ) || S_ISSOCK( mode ) ) );
-    const bool no_ofile = to_stdout || testing;
     if( i != 0 || ( !S_ISREG( mode ) && ( !can_read || !no_ofile ) ) )
       {
       if( verbosity >= 0 )
@@ -224,7 +300,7 @@ static void set_d_outname( const char * const name, const int i )
 
 static bool open_outstream( const bool force )
   {
-  int flags = O_CREAT | O_WRONLY | o_binary;
+  int flags = O_APPEND | O_CREAT | O_RDWR | O_BINARY;
   if( force ) flags |= O_TRUNC; else flags |= O_EXCL;
 
   outfd = open( output_filename, flags, outfd_mode );
@@ -263,10 +339,14 @@ static void close_and_set_permissions( const struct stat * const in_statsp )
   bool warning = false;
   if( in_statsp )
     {
+    const mode_t mode = in_statsp->st_mode;
     /* fchown will in many cases return with EPERM, which can be safely ignored. */
-    if( ( fchown( outfd, in_statsp->st_uid, in_statsp->st_gid ) != 0 &&
-          errno != EPERM ) ||
-        fchmod( outfd, in_statsp->st_mode ) != 0 ) warning = true;
+    if( fchown( outfd, in_statsp->st_uid, in_statsp->st_gid ) == 0 )
+      { if( fchmod( outfd, mode ) != 0 ) warning = true; }
+    else
+      if( errno != EPERM ||
+          fchmod( outfd, mode & ~( S_ISUID | S_ISGID | S_ISVTX ) ) != 0 )
+        warning = true;
     }
   if( close( outfd ) != 0 ) cleanup_and_fail( 1 );
   outfd = -1;
@@ -283,8 +363,8 @@ static void close_and_set_permissions( const struct stat * const in_statsp )
   }
 
 
-static int decompress( const int infd, struct Pretty_print * const pp,
-                       const bool testing )
+static int decompress( const int buffer_size, const int infd,
+                       struct Pretty_print * const pp, const bool testing )
   {
   unsigned long long partial_file_pos = 0;
   struct Range_decoder rdec;
@@ -292,7 +372,7 @@ static int decompress( const int infd, struct Pretty_print * const pp,
   bool first_member;
   if( !Rd_init( &rdec, infd ) )
     {
-    show_error( "Not enough memory. Find a machine with more memory.", 0, false );
+    show_error( "Not enough memory.", 0, false );
     cleanup_and_fail( 1 );
     }
 
@@ -332,9 +412,9 @@ static int decompress( const int infd, struct Pretty_print * const pp,
     if( verbosity >= 2 || ( verbosity == 1 && first_member ) )
       { Pp_show_msg( pp, 0 ); if( verbosity >= 3 ) show_header( header ); }
 
-    if( !LZd_init( &decoder, header, &rdec, outfd ) )
+    if( !LZd_init( &decoder, header, &rdec, buffer_size, outfd ) )
       {
-      show_error( "Not enough memory. Find a machine with more memory.", 0, false );
+      show_error( "Not enough memory. Try a smaller output buffer size.", 0, false );
       cleanup_and_fail( 1 );
       }
     result = LZd_decode_member( &decoder, pp );
@@ -431,6 +511,7 @@ int main( const int argc, const char * const argv[] )
   const char * default_output_filename = "";
   const char ** filenames = 0;
   int num_filenames = 0;
+  int buffer_size = max_dictionary_size;
   int infd = -1;
   int argind = 0;
   int retval = 0;
@@ -453,6 +534,7 @@ int main( const int argc, const char * const argv[] )
     { 'o', "output",          ap_yes },
     { 'q', "quiet",           ap_no  },
     { 't', "test",            ap_no  },
+    { 'u', "buffer-size",     ap_yes },
     { 'v', "verbose",         ap_no  },
     { 'V', "version",         ap_no  },
     {  0 ,  0,                ap_no  } };
@@ -463,7 +545,7 @@ int main( const int argc, const char * const argv[] )
   CRC32_init();
 
   if( !ap_init( &parser, argc, argv, options, 0 ) )
-    { show_error( "Memory exhausted.", 0, false ); return 1; }
+    { show_error( "Not enough memory.", 0, false ); return 1; }
   if( ap_error( &parser ) )				/* bad option */
     { show_error( ap_error( &parser ), 0, true ); return 1; }
 
@@ -483,6 +565,7 @@ int main( const int argc, const char * const argv[] )
       case 'o': default_output_filename = arg; break;
       case 'q': verbosity = -1; break;
       case 't': testing = true; break;
+      case 'u': buffer_size = get_dict_size( arg ); break;
       case 'v': if( verbosity < 4 ) ++verbosity; break;
       case 'V': show_version(); return 0;
       default : internal_error( "uncaught option" );
@@ -507,6 +590,19 @@ int main( const int argc, const char * const argv[] )
     if( strcmp( filenames[i], "-" ) != 0 ) filenames_given = true;
     }
 
+  if( buffer_size < max_dictionary_size )
+    {
+    if( to_stdout || testing )
+      { show_error( "'--buffer-size' is incompatible with '--stdout' and '--test'.", 0, false );
+        return 1; }
+    if( !default_output_filename[0] )
+      for( i = 0; i < num_filenames; ++i )
+        if( !filenames[i][0] || strcmp( filenames[i], "-" ) == 0 )
+          { show_error( "Output file must be specified when decompressing from stdin with a\n"
+                        "        reduced buffer size.", 0, false );
+            return 1; }
+    }
+
   if( !to_stdout && !testing &&
       ( filenames_given || default_output_filename[0] ) )
     set_signals();
@@ -547,7 +643,7 @@ int main( const int argc, const char * const argv[] )
     else
       {
       input_filename = filenames[i];
-      infd = open_instream( input_filename, &in_stats, testing, to_stdout );
+      infd = open_instream( input_filename, &in_stats, to_stdout || testing );
       if( infd < 0 ) { if( retval < 1 ) retval = 1; continue; }
       if( !testing )
         {
@@ -576,7 +672,7 @@ int main( const int argc, const char * const argv[] )
       delete_output_on_interrupt = true;
     in_statsp = input_filename[0] ? &in_stats : 0;
     Pp_set_name( &pp, input_filename );
-    tmp = decompress( infd, &pp, testing );
+    tmp = decompress( buffer_size, infd, &pp, testing );
     if( tmp > retval ) retval = tmp;
     if( tmp && !testing ) cleanup_and_fail( retval );
 
diff --git a/testsuite/check.sh b/testsuite/check.sh
index c4f612e..52d5122 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -27,6 +27,12 @@ fail=0
 
 printf "testing lunzip-%s..." "$2"
 
+"${LZIP}" -cqu-1 "${in_lz}" > /dev/null
+if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
+"${LZIP}" -cqu0 "${in_lz}" > /dev/null
+if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
+"${LZIP}" -cqu4095 "${in_lz}" > /dev/null
+if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
 "${LZIP}" -tq in
 if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
 "${LZIP}" -tq < in
@@ -45,11 +51,23 @@ if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
 cmp in copy || fail=1
 printf .
 
+cat "${in_lz}" > copy.lz || framework_failure
+"${LZIP}" -df copy.lz || fail=1
+cmp in copy || fail=1
+printf .
+
 printf "to be overwritten" > copy || framework_failure
 "${LZIP}" -df -o copy < "${in_lz}" || fail=1
 cmp in copy || fail=1
 printf .
 
+for i in 12 4096 4Ki 29 512KiB ; do
+	printf "to be overwritten" > copy || framework_failure
+	"${LZIP}" -df -u$i -o copy < "${in_lz}" || fail=1
+	cmp in copy || fail=1
+	printf .
+done
+
 cat "${in_lz}" > anyothername || framework_failure
 "${LZIP}" -d anyothername || fail=1
 cmp in anyothername.out || fail=1
@@ -65,7 +83,7 @@ printf .
 
 printf "garbage" >> copy2.lz || framework_failure
 printf "to be overwritten" > copy2 || framework_failure
-"${LZIP}" -dfk copy2.lz || fail=1
+"${LZIP}" -df copy2.lz || fail=1
 cmp in2 copy2 || fail=1
 printf .