Adding upstream version 1.5.upstream/1.5

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>

11 files changed, 91 insertions, 91 deletions

diff --git a/ChangeLog b/ChangeLog
index 1ad704f..e04b4c4 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,11 +1,6 @@
-2014-01-21  Antonio Diaz Diaz  <antonio@gnu.org>
+2014-04-11  Antonio Diaz Diaz  <antonio@gnu.org>
 
-	* Version 1.5-rc2 released.
-	* Minor optimizations.
-
-2013-10-30  Antonio Diaz Diaz  <antonio@gnu.org>
-
-	* Version 1.5-rc1 released.
+	* Version 1.5 released.
 	* main.c: Added new option '-u, --buffer-size' (low memory mode).
 	* main.c (close_and_set_permissions): Behave like 'cp -p'.
 
diff --git a/INSTALL b/INSTALL
index 62f4988..6991901 100644
--- a/INSTALL
+++ b/INSTALL
@@ -43,12 +43,12 @@ the main archive.
 
 Another way
 -----------
-You can also compile lunzip into a separate directory. To do this, you
-must use a version of 'make' that supports the 'VPATH' variable, such
-as GNU 'make'. 'cd' to the directory where you want the object files
-and executables to go and run the 'configure' script. 'configure'
-automatically checks for the source code in '.', in '..' and in the
-directory that 'configure' is in.
+You can also compile lunzip into a separate directory.
+To do this, you must use a version of 'make' that supports the 'VPATH'
+variable, such as GNU 'make'. 'cd' to the directory where you want the
+object files and executables to go and run the 'configure' script.
+'configure' automatically checks for the source code in '.', in '..' and
+in the directory that 'configure' is in.
 
 'configure' recognizes the option '--srcdir=DIR' to control where to
 look for the sources. Usually 'configure' can determine that directory
diff --git a/README b/README
index 3a06da8..7e13312 100644
--- a/README
+++ b/README
@@ -5,20 +5,6 @@ small size makes it well suited for embedded devices or software
 installers that need to decompress files but do not need compression
 capabilities. Lunzip is fully compatible with lzip-1.4 or newer.
 
-If the size of the output buffer is specified with the "--buffer-size"
-option, lunzip uses the decompressed file as dictionary for distances
-beyond the buffer size and is able to decompress any file using as
-little memory as 50 kB, irrespective of the dictionary size used to
-compress the file. Of course, the smaller the output buffer size used in
-relation to the dictionary size, the more accesses to disk are needed
-and the slower the decompression is. This "low memory" mode only works
-when decompressing to a regular file and is intended for systems without
-enough memory (RAM + swap) to keep the whole dictionary at once.
-
-The amount of memory required by lunzip to decompress a file is about
-46 kB larger than the dictionary size used to compress that file, unless
-the "--buffer-size" option is specified.
-
 The lzip file format is designed for long-term data archiving. It is
 clean, provides very safe 4 factor integrity checking, and is backed by
 the recovery capabilities of lziprecover.
@@ -28,6 +14,21 @@ bzip2, which makes it safer than decompressors returning ambiguous
 warning values (like gunzip) when it is used as a back end for tar or
 zutils.
 
+Lunzip provides a "low memory" mode able to decompress any file using as
+little memory as 50 kB, irrespective of the dictionary size used to
+compress the file. To activate it, specify the size of the output buffer
+with the "--buffer-size" option and lunzip will use the decompressed
+file as dictionary for distances beyond the buffer size. Of course, the
+smaller the output buffer size used in relation to the dictionary size,
+the more accesses to disk are needed and the slower the decompression
+is. This "low memory" mode only works when decompressing to a regular
+file and is intended for systems without enough memory (RAM + swap) to
+keep the whole dictionary at once.
+
+The amount of memory required by lunzip to decompress a file is about
+46 kB larger than the dictionary size used to compress that file, unless
+the "--buffer-size" option is specified.
+
 Lunzip attempts to guess the name for the decompressed file from that of
 the compressed file as follows:
 
diff --git a/carg_parser.c b/carg_parser.c
index 1dfcb2b..80e60c1 100644
--- a/carg_parser.c
+++ b/carg_parser.c
@@ -176,7 +176,8 @@ static char parse_short_option( struct Arg_parser * const ap,
 
     if( index < 0 )
       {
-      add_error( ap, "invalid option -- " ); add_error( ap, code_str );
+      add_error( ap, "invalid option -- '" ); add_error( ap, code_str );
+      add_error( ap, "'" );
       return 1;
       }
 
@@ -191,8 +192,8 @@ static char parse_short_option( struct Arg_parser * const ap,
       {
       if( !arg || !arg[0] )
         {
-        add_error( ap, "option requires an argument -- " );
-        add_error( ap, code_str );
+        add_error( ap, "option requires an argument -- '" );
+        add_error( ap, code_str ); add_error( ap, "'" );
         return 1;
         }
       ++*argindp; cind = 0;
diff --git a/configure b/configure
index e2097c8..6bb17cd 100755
--- a/configure
+++ b/configure
@@ -6,7 +6,7 @@
 # to copy, distribute and modify it.
 
 pkgname=lunzip
-pkgversion=1.5-rc2
+pkgversion=1.5
 progname=lunzip
 srctrigger=doc/${progname}.1
 
diff --git a/decoder.c b/decoder.c
index b9eb2cd..f39aa80 100644
--- a/decoder.c
+++ b/decoder.c
@@ -45,7 +45,7 @@ void Pp_show_msg( struct Pretty_print * const pp, const char * const msg )
       for( i = 0; i < len; ++i ) fprintf( stderr, " " );
       if( !msg ) fflush( stderr );
       }
-    if( msg ) fprintf( stderr, "%s.\n", msg );
+    if( msg ) fprintf( stderr, "%s\n", msg );
     }
   }
 
@@ -127,8 +127,8 @@ void LZd_flush_data( struct LZ_decoder * const d )
   }
 
 
-bool LZd_verify_trailer( struct LZ_decoder * const d,
-                         struct Pretty_print * const pp )
+static bool LZd_verify_trailer( struct LZ_decoder * const d,
+                                struct Pretty_print * const pp )
   {
   File_trailer trailer;
   const unsigned long long member_size = Rd_member_position( d->rdec ) + Ft_size;
@@ -153,7 +153,7 @@ bool LZd_verify_trailer( struct LZ_decoder * const d,
   if( d->rdec->code != 0 )
     {
     error = true;
-    Pp_show_msg( pp, "Range decoder final code is not zero" );
+    Pp_show_msg( pp, "Range decoder final code is not zero." );
     }
   trailer_crc = Ft_get_data_crc( trailer );
   if( trailer_crc != LZd_crc( d ) )
@@ -208,7 +208,7 @@ int LZd_decode_member( struct LZ_decoder * const d,
   struct Range_decoder * const rdec = d->rdec;
   void (* const copy_block)
        ( struct LZ_decoder * const d, const int distance, int len ) =
-    ( d->buffer_size >= (int)d->dictionary_size ) ?
+    ( (unsigned)d->buffer_size >= d->dictionary_size ) ?
     &LZd_copy_block : &LZd_copy_block2;
   unsigned rep0 = 0;		/* rep[0-3] latest four distances */
   unsigned rep1 = 0;		/* used for efficient coding of */
@@ -227,14 +227,14 @@ int LZd_decode_member( struct LZ_decoder * const d,
         {
         state -= ( state < 4 ) ? state : 3;
         LZd_put_byte( d, Rd_decode_tree( rdec,
-                      d->bm_literal[get_lit_state(prev_byte)], 8 ) );
+                         d->bm_literal[get_lit_state(prev_byte)], 8 ) );
         }
       else
         {
         state -= ( state < 10 ) ? 3 : 6;
         LZd_put_byte( d, Rd_decode_matched( rdec,
-                      d->bm_literal[get_lit_state(prev_byte)],
-                      LZd_get_byte( d, rep0 ) ) );
+                         d->bm_literal[get_lit_state(prev_byte)],
+                         LZd_get_byte( d, rep0 ) ) );
         }
       }
     else
diff --git a/decoder.h b/decoder.h
index 3b97014..d6162d8 100644
--- a/decoder.h
+++ b/decoder.h
@@ -158,7 +158,7 @@ static inline int Rd_decode_tree6( struct Range_decoder * const rdec,
   symbol = ( symbol << 1 ) | Rd_decode_bit( rdec, &bm[symbol] );
   symbol = ( symbol << 1 ) | Rd_decode_bit( rdec, &bm[symbol] );
   symbol = ( symbol << 1 ) | Rd_decode_bit( rdec, &bm[symbol] );
-  return symbol - (1 << 6);
+  return symbol & 0x3F;
   }
 
 static inline int Rd_decode_tree_reversed( struct Range_decoder * const rdec,
@@ -256,9 +256,6 @@ struct LZ_decoder
 
 void LZd_flush_data( struct LZ_decoder * const d );
 
-bool LZd_verify_trailer( struct LZ_decoder * const d,
-                         struct Pretty_print * const pp );
-
 int seek_read( const int fd, uint8_t * const buf, const int size,
                const int offset );
 
diff --git a/doc/lunzip.1 b/doc/lunzip.1
index 4557839..15b2683 100644
--- a/doc/lunzip.1
+++ b/doc/lunzip.1
@@ -1,7 +1,7 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.37.1.
-.TH LUNZIP "1" "January 2014" "Lunzip 1.5-rc2" "User Commands"
+.TH LUNZIP "1" "April 2014" "lunzip 1.5" "User Commands"
 .SH NAME
-Lunzip \- decompressor for lzip files
+lunzip \- decompressor for lzip files
 .SH SYNOPSIS
 .B lunzip
 [\fIoptions\fR] [\fIfiles\fR]
@@ -11,14 +11,14 @@ small size makes it well suited for embedded devices or software
 installers that need to decompress files but do not need compression
 capabilities. Lunzip is fully compatible with lzip\-1.4 or newer.
 .PP
-If the size of the output buffer is specified with the '\-\-buffer\-size'
-option, lunzip uses the decompressed file as dictionary for distances
-beyond the buffer size and is able to decompress any file using as
+Lunzip provides a 'low memory' mode able to decompress any file using as
 little memory as 50 kB, irrespective of the dictionary size used to
-compress the file. Of course, the smaller the output buffer size used in
-relation to the dictionary size, the more accesses to disk are needed
-and the slower the decompression is. This 'low memory' mode only works
-when decompressing to a regular file.
+compress the file. To activate it, specify the size of the output buffer
+with the '\-\-buffer\-size' option and lunzip will use the decompressed
+file as dictionary for distances beyond the buffer size. Of course, the
+smaller the output buffer size used in relation to the dictionary size,
+the more accesses to disk are needed and the slower the decompression is.
+This 'low memory' mode only works when decompressing to a regular file.
 .SH OPTIONS
 .TP
 \fB\-h\fR, \fB\-\-help\fR
@@ -56,6 +56,8 @@ be verbose (a 2nd \fB\-v\fR gives more)
 .PP
 If no file names are given, lunzip decompresses from standard input to
 standard output.
+Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,
+Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
 .PP
 Exit status: 0 for a normal exit, 1 for environmental problems (file
 not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
diff --git a/lzip.h b/lzip.h
index 39bde22..ab23aa5 100644
--- a/lzip.h
+++ b/lzip.h
@@ -46,7 +46,7 @@ static inline State St_set_short_rep( const State st )
 
 enum {
   min_dictionary_bits = 12,
-  min_dictionary_size = 1 << min_dictionary_bits,
+  min_dictionary_size = 1 << min_dictionary_bits,	/* >= modeled_distances */
   max_dictionary_bits = 29,
   max_dictionary_size = 1 << max_dictionary_bits,
   literal_context_bits = 3,
diff --git a/main.c b/main.c
index 70bcb37..3a53f94 100644
--- a/main.c
+++ b/main.c
@@ -88,14 +88,14 @@ static void show_help( void )
           "small size makes it well suited for embedded devices or software\n"
           "installers that need to decompress files but do not need compression\n"
           "capabilities. Lunzip is fully compatible with lzip-1.4 or newer.\n"
-          "\nIf the size of the output buffer is specified with the '--buffer-size'\n"
-          "option, lunzip uses the decompressed file as dictionary for distances\n"
-          "beyond the buffer size and is able to decompress any file using as\n"
+          "\nLunzip provides a 'low memory' mode able to decompress any file using as\n"
           "little memory as 50 kB, irrespective of the dictionary size used to\n"
-          "compress the file. Of course, the smaller the output buffer size used in\n"
-          "relation to the dictionary size, the more accesses to disk are needed\n"
-          "and the slower the decompression is. This 'low memory' mode only works\n"
-          "when decompressing to a regular file.\n" );
+          "compress the file. To activate it, specify the size of the output buffer\n"
+          "with the '--buffer-size' option and lunzip will use the decompressed\n"
+          "file as dictionary for distances beyond the buffer size. Of course, the\n"
+          "smaller the output buffer size used in relation to the dictionary size,\n"
+          "the more accesses to disk are needed and the slower the decompression is.\n"
+          "This 'low memory' mode only works when decompressing to a regular file.\n" );
   printf( "\nUsage: %s [options] [files]\n", invocation_name );
   printf( "\nOptions:\n"
           "  -h, --help                 display this help and exit\n"
@@ -111,6 +111,8 @@ static void show_help( void )
           "  -v, --verbose              be verbose (a 2nd -v gives more)\n"
           "If no file names are given, lunzip decompresses from standard input to\n"
           "standard output.\n"
+          "Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,\n"
+          "Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...\n"
           "\nExit status: 0 for a normal exit, 1 for environmental problems (file\n"
           "not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n"
           "invalid input file, 3 for an internal consistency error (eg, bug) which\n"
@@ -122,7 +124,7 @@ static void show_help( void )
 
 static void show_version( void )
   {
-  printf( "%s %s\n", Program_name, PROGVERSION );
+  printf( "%s %s\n", program_name, PROGVERSION );
   printf( "Copyright (C) %s Antonio Diaz Diaz.\n", program_year );
   printf( "License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n"
           "This is free software: you are free to change and redistribute it.\n"
@@ -232,8 +234,7 @@ static int open_instream( const char * const name, struct stat * const in_statsp
                           const bool no_ofile )
   {
   int infd;
-  do infd = open( name, O_RDONLY | O_BINARY );
-  while( infd < 0 && errno == EINTR );
+  infd = open( name, O_RDONLY | O_BINARY );
   if( infd < 0 )
     {
     if( verbosity >= 0 )
@@ -305,8 +306,7 @@ static bool open_outstream( const bool force )
   int flags = O_APPEND | O_CREAT | O_RDWR | O_BINARY;
   if( force ) flags |= O_TRUNC; else flags |= O_EXCL;
 
-  do outfd = open( output_filename, flags, outfd_mode );
-  while( outfd < 0 && errno == EINTR );
+  outfd = open( output_filename, flags, outfd_mode );
   if( outfd < 0 && verbosity >= 0 )
     {
     if( errno == EEXIST )
@@ -390,14 +390,14 @@ static int decompress( const int buffer_size, const int infd,
     if( Rd_finished( &rdec ) )			/* End Of File */
       {
       if( first_member )
-        { Pp_show_msg( pp, "File ends unexpectedly at member header" );
+        { Pp_show_msg( pp, "File ends unexpectedly at member header." );
           retval = 2; }
       break;
       }
     if( !Fh_verify_magic( header ) )
       {
       if( !first_member ) break;		/* trailing garbage */
-      Pp_show_msg( pp, "Bad magic number (file not in lzip format)" );
+      Pp_show_msg( pp, "Bad magic number (file not in lzip format)." );
       retval = 2; break;
       }
     if( !Fh_verify_version( header ) )
@@ -411,7 +411,7 @@ static int decompress( const int buffer_size, const int infd,
     dictionary_size = Fh_get_dictionary_size( header );
     if( dictionary_size < min_dictionary_size ||
         dictionary_size > max_dictionary_size )
-      { Pp_show_msg( pp, "Invalid dictionary size in member header" );
+      { Pp_show_msg( pp, "Invalid dictionary size in member header." );
         retval = 2; break; }
 
     if( verbosity >= 2 || ( verbosity == 1 && first_member ) )
@@ -432,10 +432,10 @@ static int decompress( const int buffer_size, const int infd,
         {
         Pp_show_msg( pp, 0 );
         if( result == 2 )
-          fprintf( stderr, "File ends unexpectedly at pos %llu\n",
+          fprintf( stderr, "File ends unexpectedly at pos %llu.\n",
                    partial_file_pos );
         else
-          fprintf( stderr, "Decoder error at pos %llu\n", partial_file_pos );
+          fprintf( stderr, "Decoder error at pos %llu.\n", partial_file_pos );
         }
       retval = 2; break;
       }
@@ -472,7 +472,7 @@ void show_error( const char * const msg, const int errcode, const bool help )
     if( msg && msg[0] )
       {
       fprintf( stderr, "%s: %s", program_name, msg );
-      if( errcode > 0 ) fprintf( stderr, ": %s", strerror( errcode ) );
+      if( errcode > 0 ) fprintf( stderr, ": %s.", strerror( errcode ) );
       fprintf( stderr, "\n" );
       }
     if( help )
@@ -485,7 +485,7 @@ void show_error( const char * const msg, const int errcode, const bool help )
 void internal_error( const char * const msg )
   {
   if( verbosity >= 0 )
-    fprintf( stderr, "%s: internal error: %s.\n", program_name, msg );
+    fprintf( stderr, "%s: internal error: %s\n", program_name, msg );
   exit( 3 );
   }
 
@@ -553,7 +553,7 @@ int main( const int argc, const char * const argv[] )
       case 'u': buffer_size = get_dict_size( arg ); break;
       case 'v': if( verbosity < 4 ) ++verbosity; break;
       case 'V': show_version(); return 0;
-      default : internal_error( "uncaught option" );
+      default : internal_error( "uncaught option." );
       }
     } /* end process options */
 
diff --git a/testsuite/check.sh b/testsuite/check.sh
index 21199b7..76ab094 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -12,7 +12,7 @@ testdir=`cd "$1" ; pwd`
 LZIP="${objdir}"/lunzip
 framework_failure() { echo "failure in testing framework" ; exit 1 ; }
 
-if [ ! -x "${LZIP}" ] ; then
+if [ ! -f "${LZIP}" ] || [ ! -x "${LZIP}" ] ; then
 	echo "${LZIP}: cannot execute"
 	exit 1
 fi
@@ -28,21 +28,24 @@ fail=0
 printf "testing lunzip-%s..." "$2"
 
 "${LZIP}" -cqu-1 "${in_lz}" > /dev/null
-if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 1 ] ; then printf . ; else printf - ; fail=1 ; fi
 "${LZIP}" -cqu0 "${in_lz}" > /dev/null
-if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 1 ] ; then printf . ; else printf - ; fail=1 ; fi
 "${LZIP}" -cqu4095 "${in_lz}" > /dev/null
-if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 1 ] ; then printf . ; else printf - ; fail=1 ; fi
 "${LZIP}" -cqu513MiB "${in_lz}" > /dev/null
-if [ $? = 1 ] ; then printf . ; else fail=1 ; printf - ; fi
-"${LZIP}" -tq in
-if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
-"${LZIP}" -tq < in
-if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 1 ] ; then printf . ; else printf - ; fail=1 ; fi
+printf "  in: Bad magic number (file not in lzip format).\n" > msg
+"${LZIP}" -t in 2> out
+if [ $? = 2 ] && cmp out msg ; then printf . ; else printf - ; fail=1 ; fi
+printf "  (stdin): Bad magic number (file not in lzip format).\n" > msg
+"${LZIP}" -t < in 2> out
+if [ $? = 2 ] && cmp out msg ; then printf . ; else printf - ; fail=1 ; fi
+rm -f out msg
 "${LZIP}" -cdq in
-if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
 "${LZIP}" -cdq < in
-if [ $? = 2 ] ; then printf . ; else fail=1 ; printf - ; fi
+if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
 dd if="${in_lz}" bs=1 count=6 2> /dev/null | "${LZIP}" -tq
 if [ $? = 2 ] ; then printf . ; else printf - ; fail=1 ; fi
 dd if="${in_lz}" bs=1 count=20 2> /dev/null | "${LZIP}" -tq
@@ -54,6 +57,7 @@ cmp in copy || fail=1
 printf .
 
 cat "${in_lz}" > copy.lz || framework_failure
+printf "to be overwritten" > copy || framework_failure
 "${LZIP}" -df copy.lz || fail=1
 cmp in copy || fail=1
 printf .
@@ -63,13 +67,6 @@ printf "to be overwritten" > copy || framework_failure
 cmp in copy || fail=1
 printf .
 
-for i in 12 4096 4Ki 29 512KiB ; do
-	printf "to be overwritten" > copy || framework_failure
-	"${LZIP}" -df -u$i -o copy < "${in_lz}" || fail=1
-	cmp in copy || fail=1
-	printf .
-done
-
 cat "${in_lz}" > anyothername || framework_failure
 "${LZIP}" -d anyothername || fail=1
 cmp in anyothername.out || fail=1
@@ -89,6 +86,13 @@ printf "to be overwritten" > copy2 || framework_failure
 cmp in2 copy2 || fail=1
 printf .
 
+for i in 12 4096 4Ki 29 512KiB ; do
+	printf "to be overwritten" > copy || framework_failure
+	"${LZIP}" -df -u$i -o copy < "${in_lz}" || fail=1
+	cmp in copy || fail=1
+	printf .
+done
+
 echo
 if [ ${fail} = 0 ] ; then
 	echo "tests completed successfully."