summaryrefslogtreecommitdiffstats
path: root/doc
diff options
context:
space:
mode:
authorDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 10:02:52 +0000
committerDaniel Baumann <mail@daniel-baumann.ch>2015-11-07 10:02:52 +0000
commit3fb246ff84982a43c4323c60ae7c259d37d286f0 (patch)
tree7475aa7c12dc146cfb24a24914a47a1c40ff2a21 /doc
parentAdding upstream version 1.15. (diff)
downloadlzip-3fb246ff84982a43c4323c60ae7c259d37d286f0.tar.xz
lzip-3fb246ff84982a43c4323c60ae7c259d37d286f0.zip
Adding upstream version 1.16~pre1.upstream/1.16_pre1
Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>
Diffstat (limited to '')
-rw-r--r--doc/lzip.14
-rw-r--r--doc/lzip.info312
-rw-r--r--doc/lzip.texi (renamed from doc/lzip.texinfo)100
3 files changed, 217 insertions, 199 deletions
diff --git a/doc/lzip.1 b/doc/lzip.1
index a2677d0..a36a021 100644
--- a/doc/lzip.1
+++ b/doc/lzip.1
@@ -1,5 +1,5 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.37.1.
-.TH LZIP "1" "September 2013" "Lzip 1.15" "User Commands"
+.TH LZIP "1" "January 2014" "Lzip 1.16-pre1" "User Commands"
.SH NAME
Lzip \- reduces the size of files
.SH SYNOPSIS
@@ -82,7 +82,7 @@ Report bugs to lzip\-bug@nongnu.org
.br
Lzip home page: http://www.nongnu.org/lzip/lzip.html
.SH COPYRIGHT
-Copyright \(co 2013 Antonio Diaz Diaz.
+Copyright \(co 2014 Antonio Diaz Diaz.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
.br
This is free software: you are free to change and redistribute it.
diff --git a/doc/lzip.info b/doc/lzip.info
index a1a2cbe..609da4f 100644
--- a/doc/lzip.info
+++ b/doc/lzip.info
@@ -1,4 +1,4 @@
-This is lzip.info, produced by makeinfo version 4.13 from lzip.texinfo.
+This is lzip.info, produced by makeinfo version 4.13+ from lzip.texi.
INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
@@ -11,7 +11,7 @@ File: lzip.info, Node: Top, Next: Introduction, Up: (dir)
Lzip Manual
***********
-This manual is for Lzip (version 1.15, 20 September 2013).
+This manual is for Lzip (version 1.16-pre1, 11 January 2014).
* Menu:
@@ -26,7 +26,8 @@ This manual is for Lzip (version 1.15, 20 September 2013).
* Concept index:: Index of concepts
- Copyright (C) 2008, 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz.
+ Copyright (C) 2008, 2009, 2010, 2011, 2012, 2013, 2014 Antonio Diaz
+Diaz.
This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.
@@ -38,23 +39,29 @@ File: lzip.info, Node: Introduction, Next: Algorithm, Prev: Top, Up: Top
**************
Lzip is a lossless data compressor with a user interface similar to the
-one of gzip or bzip2. Lzip decompresses almost as fast as gzip and
-compresses more than bzip2, which makes it well suited for software
-distribution and data archiving. Lzip is a clean implementation of the
-LZMA algorithm.
+one of gzip or bzip2. Lzip is about as fast as gzip, compresses most
+files more than bzip2, and is better than both from a data recovery
+perspective. Lzip is a clean implementation of the LZMA algorithm.
The lzip file format is designed for long-term data archiving and
-provides very safe integrity checking. The member trailer stores the
-32-bit CRC of the original data, the size of the original data and the
-size of the member. These values, together with the value remaining in
-the range decoder and the end-of-stream marker, provide a 4 factor
-integrity checking which guarantees that the decompressed version of the
-data is identical to the original. This guards against corruption of the
-compressed data, and against undetected bugs in lzip (hopefully very
-unlikely). The chances of data corruption going undetected are
-microscopic. Be aware, though, that the check occurs upon decompression,
-so it can only tell you that something is wrong. It can't help you
-recover the original uncompressed data.
+provides very safe integrity checking. It is as simple as possible (but
+not simpler), so that with the only help of the lzip manual it would be
+possible for a digital archaeologist to extract the data from a lzip
+file long after quantum computers eventually render LZMA obsolete.
+Additionally lzip is copylefted, which guarantees that it will remain
+free forever.
+
+ The member trailer stores the 32-bit CRC of the original data, the
+size of the original data and the size of the member. These values,
+together with the value remaining in the range decoder and the
+end-of-stream marker, provide a 4 factor integrity checking which
+guarantees that the decompressed version of the data is identical to
+the original. This guards against corruption of the compressed data,
+and against undetected bugs in lzip (hopefully very unlikely). The
+chances of data corruption going undetected are microscopic. Be aware,
+though, that the check occurs upon decompression, so it can only tell
+you that something is wrong. It can't help you recover the original
+uncompressed data.
If you ever need to recover data from a damaged lzip file, try the
lziprecover program. Lziprecover makes lzip files resistant to bit-flip
@@ -66,12 +73,23 @@ of a file.
which makes it safer than compressors returning ambiguous warning
values (like gzip) when it is used as a back end for tar or zutils.
- Lzip replaces every file given in the command line with a compressed
-version of itself, with the name "original_name.lz". Each compressed
-file has the same modification date, permissions, and, when possible,
-ownership as the corresponding original, so that these properties can be
-correctly restored at decompression time. Lzip is able to read from some
-types of non regular files if the `--stdout' option is specified.
+ When compressing, lzip replaces every file given in the command line
+with a compressed version of itself, with the name "original_name.lz".
+When decompressing, lzip attempts to guess the name for the decompressed
+file from that of the compressed file as follows:
+
+filename.lz becomes filename
+filename.tlz becomes filename.tar
+anyothername becomes anyothername.out
+
+ (De)compressing a file is much like copying or moving it; therefore
+lzip preserves the access and modification dates, permissions, and, when
+possible, ownership of the file just as "cp -p" does. (If the user ID or
+the group ID can't be duplicated, the file permission bits S_ISUID and
+S_ISGID are cleared).
+
+ Lzip is able to read from some types of non regular files if the
+'--stdout' option is specified.
If no file names are specified, lzip compresses (or decompresses)
from standard input to standard output. In this case, lzip will decline
@@ -96,22 +114,15 @@ large, about 64 PiB each.
The amount of memory required for compression is about 1 or 2 times
the dictionary size limit (1 if input file size is less than dictionary
size limit, else 2) plus 9 times the dictionary size really used. The
-option `-0' is special and only requires about 1.5 MiB at most. The
-amount of memory required for decompression is only a few tens of KiB
-larger than the dictionary size really used.
+option '-0' is special and only requires about 1.5 MiB at most. The
+amount of memory required for decompression is about 46 kB larger than
+the dictionary size really used.
Lzip will automatically use the smallest possible dictionary size
without exceeding the given limit. Keep in mind that the decompression
memory requirement is affected at compression time by the choice of
dictionary size limit.
- When decompressing, lzip attempts to guess the name for the
-decompressed file from that of the compressed file as follows:
-
-filename.lz becomes filename
-filename.tlz becomes filename.tar
-anyothername becomes anyothername.out
-

File: lzip.info, Node: Algorithm, Next: Invoking lzip, Prev: Introduction, Up: Top
@@ -157,7 +168,7 @@ price represents the number of output bits produced.
6) The range encoder encodes the sequence produced by the main
encoder and sends the produced bytes to the output stream.
- 7) Go back to step 3 until the input data is finished or until the
+ 7) Go back to step 3 until the input data are finished or until the
member or volume size limits are reached.
8) The range encoder is flushed.
@@ -185,67 +196,67 @@ The format for running lzip is:
Lzip supports the following options:
-`-h'
-`--help'
+'-h'
+'--help'
Print an informative help message describing the options and exit.
-`-V'
-`--version'
+'-V'
+'--version'
Print the version number of lzip on the standard output and exit.
-`-b BYTES'
-`--member-size=BYTES'
+'-b BYTES'
+'--member-size=BYTES'
Set the member size limit to BYTES. A small member size may
degrade compression ratio, so use it only when needed. Valid values
range from 100 kB to 64 PiB. Defaults to 64 PiB.
-`-c'
-`--stdout'
+'-c'
+'--stdout'
Compress or decompress to standard output. Needed when reading
from a named pipe (fifo) or from a device. Use it to recover as
much of the uncompressed data as possible when decompressing a
corrupt file.
-`-d'
-`--decompress'
+'-d'
+'--decompress'
Decompress.
-`-f'
-`--force'
+'-f'
+'--force'
Force overwrite of output files.
-`-F'
-`--recompress'
- Force recompression of files whose name already has the `.lz' or
- `.tlz' suffix.
+'-F'
+'--recompress'
+ Force recompression of files whose name already has the '.lz' or
+ '.tlz' suffix.
-`-k'
-`--keep'
+'-k'
+'--keep'
Keep (don't delete) input files during compression or
decompression.
-`-m BYTES'
-`--match-length=BYTES'
+'-m BYTES'
+'--match-length=BYTES'
Set the match length limit in bytes. After a match this long is
found, the search is finished. Valid values range from 5 to 273.
Larger values usually give better compression ratios but longer
compression times.
-`-o FILE'
-`--output=FILE'
- When reading from standard input and `--stdout' has not been
- specified, use `FILE' as the virtual name of the uncompressed
- file. This produces a file named `FILE' when decompressing, a file
- named `FILE.lz' when compressing, and several files named
- `FILE00001.lz', `FILE00002.lz', etc, when compressing and
+'-o FILE'
+'--output=FILE'
+ When reading from standard input and '--stdout' has not been
+ specified, use 'FILE' as the virtual name of the uncompressed
+ file. This produces a file named 'FILE' when decompressing, a file
+ named 'FILE.lz' when compressing, and several files named
+ 'FILE00001.lz', 'FILE00002.lz', etc, when compressing and
splitting the output in volumes.
-`-q'
-`--quiet'
+'-q'
+'--quiet'
Quiet operation. Suppress all messages.
-`-s BYTES'
-`--dictionary-size=BYTES'
+'-s BYTES'
+'--dictionary-size=BYTES'
Set the dictionary size limit in bytes. Valid values range from 4
KiB to 512 MiB. Lzip will use the smallest possible dictionary
size for each member without exceeding this limit. Note that
@@ -258,43 +269,43 @@ The format for running lzip is:
requirement is affected at compression time by the choice of
dictionary size limit.
-`-S BYTES'
-`--volume-size=BYTES'
+'-S BYTES'
+'--volume-size=BYTES'
Split the compressed output into several volume files with names
- `original_name00001.lz', `original_name00002.lz', etc, and set the
+ 'original_name00001.lz', 'original_name00002.lz', etc, and set the
volume size limit to BYTES. Each volume is a complete, maybe
multi-member, lzip file. A small volume size may degrade
compression ratio, so use it only when needed. Valid values range
from 100 kB to 4 EiB.
-`-t'
-`--test'
+'-t'
+'--test'
Check integrity of the specified file(s), but don't decompress
them. This really performs a trial decompression and throws away
- the result. Use it together with `-v' to see information about
+ the result. Use it together with '-v' to see information about
the file.
-`-v'
-`--verbose'
+'-v'
+'--verbose'
Verbose mode.
When compressing, show the compression ratio for each file
- processed. A second `-v' shows the progress of compression.
+ processed. A second '-v' shows the progress of compression.
When decompressing or testing, further -v's (up to 4) increase the
verbosity level, showing status, compression ratio, dictionary
size, trailer contents (CRC, data size, member size), and up to 6
bytes of trailing garbage (if any).
-`-0 .. -9'
+'-0 .. -9'
Set the compression parameters (dictionary size and match length
- limit) as shown in the table below. Note that `-9' can be much
- slower than `-0'. These options have no effect when decompressing.
+ limit) as shown in the table below. Note that '-9' can be much
+ slower than '-0'. These options have no effect when decompressing.
The bidimensional parameter space of LZMA can't be mapped to a
linear scale optimal for all files. If your files are large, very
- repetitive, etc, you may need to use the `--match-length' and
- `--dictionary-size' options directly to achieve optimal
- performance. For example, `-9m64' usually compresses executables
- more (and faster) than `-9'.
+ repetitive, etc, you may need to use the '--match-length' and
+ '--dictionary-size' options directly to achieve optimal
+ performance. For example, '-9m64' usually compresses executables
+ more (and faster) than '-9'.
Level Dictionary size Match length limit
-0 64 KiB 16 bytes
@@ -308,13 +319,13 @@ The format for running lzip is:
-8 24 MiB 132 bytes
-9 32 MiB 273 bytes
-`--fast'
-`--best'
+'--fast'
+'--best'
Aliases for GNU gzip compatibility.
Numbers given as arguments to options may be followed by a multiplier
-and an optional `B' for "byte".
+and an optional 'B' for "byte".
Table of SI and binary prefixes (unit multipliers):
@@ -369,15 +380,15 @@ additional information before, between, or after them.
All multibyte values are stored in little endian order.
-`ID string'
+'ID string'
A four byte string, identifying the lzip format, with the value
"LZIP" (0x4C, 0x5A, 0x49, 0x50).
-`VN (version number, 1 byte)'
+'VN (version number, 1 byte)'
Just in case something needs to be modified in the future. 1 for
now.
-`DS (coded dictionary size, 1 byte)'
+'DS (coded dictionary size, 1 byte)'
Lzip divides the distance between any two powers of 2 into 8
equally spaced intervals, named "wedges". The dictionary size is
calculated by taking a power of 2 (the base size) and substracting
@@ -389,18 +400,18 @@ additional information before, between, or after them.
Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
Valid values for dictionary size range from 4 KiB to 512 MiB.
-`Lzma stream'
+'Lzma stream'
The lzma stream, finished by an end of stream marker. Uses default
- values for encoder properties. See the chapter `Stream format'
+ values for encoder properties. See the chapter 'Stream format'
(*note Stream format::) for a complete description.
-`CRC32 (4 bytes)'
+'CRC32 (4 bytes)'
CRC of the uncompressed original data.
-`Data size (8 bytes)'
+'Data size (8 bytes)'
Size of the uncompressed original data.
-`Member size (8 bytes)'
+'Member size (8 bytes)'
Total size of the member, including header and trailer. This field
acts as a distributed index, allows the verification of stream
integrity, and facilitates safe recovery of undamaged members from
@@ -415,9 +426,9 @@ File: lzip.info, Node: Stream format, Next: Examples, Prev: File format, Up:
The LZMA algorithm has three parameters, called "special LZMA
properties", to adjust it for some kinds of binary data. These
-parameters are; `literal_context_bits' (with a default value of 3),
-`literal_pos_state_bits' (with a default value of 0), and
-`pos_state_bits' (with a default value of 2). As a general purpose
+parameters are; 'literal_context_bits' (with a default value of 3),
+'literal_pos_state_bits' (with a default value of 0), and
+'pos_state_bits' (with a default value of 2). As a general purpose
compressor, lzip only uses the default values for these parameters.
Lzip also finishes the LZMA stream with an "End Of Stream" marker
@@ -473,7 +484,7 @@ Bit sequence Name Description
In the following tables, multi-bit sequences are coded in normal
order, from MSB to LSB, except where noted otherwise.
- Lengths (the `len' in the table above) are coded as follows:
+ Lengths (the 'len' in the table above) are coded as follows:
Bit sequence Description
--------------------------------------------------------------------------
@@ -485,13 +496,13 @@ Bit sequence Description
The coding of distances is a little more complicated. LZMA divides
the interval between any two powers of 2 into 2 halves, named slots. As
possible distances range from 0 to (2^32 - 1), there are 64 slots (0 to
-63). The slot number is context-coded in 6 bits. `direct_bits' are the
+63). The slot number is context-coded in 6 bits. 'direct_bits' are the
remaining bits (from 0 to 30) needed to form a complete distance, and
are calculated as (slot >> 1) - 1. If a distance needs 6 or more
direct_bits, the last 4 bits are coded separately. The last piece
(direct_bits for distances 4 to 127 or the last 4 bits for distances >=
128) is context-coded in reverse order (from LSB to MSB). For distances
->= 128, the `direct_bits - 4' part is coded with fixed 0.5 probability.
+>= 128, the 'direct_bits - 4' part is coded with fixed 0.5 probability.
Bit sequence Description
--------------------------------------------------------------------------
@@ -503,40 +514,40 @@ slot + (direct_bits - 4) + 4 bits distances from 128 to 2^32 - 1
5.2 The coding contexts
=======================
-These contexts (`Bit_model' in the source), are integers or arrays of
+These contexts ('Bit_model' in the source), are integers or arrays of
integers representing the probability of the corresponding bit being 0.
The indices used in these arrays are:
-`state'
- A state machine (`State' in the source) with 12 states (0 to 11),
+'state'
+ A state machine ('State' in the source) with 12 states (0 to 11),
coding the latest 2 to 4 types of sequences processed. The initial
state is 0.
-`pos_state'
+'pos_state'
Value of the 2 least significant bits of the current position in
the decoded data.
-`literal_state'
+'literal_state'
Value of the 3 most significant bits of the latest byte decoded.
-`len_state'
+'len_state'
Coded value of length (length - 2), with a maximum of 3. The
resulting value is in the range 0 to 3.
- In the following table, `!literal' is any sequence except a literal
-byte. `rep' is any one of `rep0', `rep1', `rep2' or `rep3'. The types
+ In the following table, '!literal' is any sequence except a literal
+byte. 'rep' is any one of 'rep0', 'rep1', 'rep2' or 'rep3'. The types
of previous sequences corresponding to each state are:
State Types of previous sequences
-----------------------------------------------
+--------------------------------------------------------
0 literal, literal, literal
1 match, literal, literal
-2 (rep or shortrep), literal, literal
+2 rep or (!literal, shortrep), literal, literal
3 literal, shortrep, literal, literal
4 match, literal
-5 (rep or shortrep), literal
+5 rep or (!literal, shortrep), literal
6 literal, shortrep, literal
7 literal, match
8 literal, rep
@@ -567,9 +578,9 @@ bm_align reverse bit tree for distances >= 128, after
fixed probability bits
- There are two separate sets of contexts for lengths (`Len_model' in
+ There are two separate sets of contexts for lengths ('Len_model' in
the source). One for normal matches, the other for repeated matches. The
-contexts in each Len_model are (see `decode_len' in the source):
+contexts in each Len_model are (see 'decode_len' in the source):
Name Indices Used when
---------------------------------------------------------------------------
@@ -580,33 +591,33 @@ bm_mid pos_state, bit tree after sequence 10
bm_high bit tree after sequence 11
- The context array `bm_literal' is special. In principle it acts as a
-normal bit tree context, the one selected by `literal_state'. But if
+ The context array 'bm_literal' is special. In principle it acts as a
+normal bit tree context, the one selected by 'literal_state'. But if
the previous decoded byte was not a literal, two other bit tree
-contexts are used depending on the value of each bit in `match_byte'
+contexts are used depending on the value of each bit in 'match_byte'
(the byte at the latest used distance), until a bit is decoded that is
-different from its corresponding bit in `match_byte'. After the first
+different from its corresponding bit in 'match_byte'. After the first
difference is found, the rest of the byte is decoded using the normal
-bit tree context. (See `decode_matched' in the source).
+bit tree context. (See 'decode_matched' in the source).
5.3 The range decoder
=====================
The LZMA stream is consumed one byte at a time by the range decoder.
-(See `normalize' in the source). Every byte consumed produces a
+(See 'normalize' in the source). Every byte consumed produces a
variable number of decoded bits, depending on how well these bits agree
-with their context. (See `decode_bit' in the source).
+with their context. (See 'decode_bit' in the source).
The range decoder state consists of two unsigned 32-bit variables,
-`range' (representing the most significant part of the range size not
-yet decoded), and `code' (representing the current point within
-`range'). `range' is initialized to (2^32 - 1), and `code' is
+'range' (representing the most significant part of the range size not
+yet decoded), and 'code' (representing the current point within
+'range'). 'range' is initialized to (2^32 - 1), and 'code' is
initialized to 0.
The range encoder produces a first 0 byte that must be ignored by the
range decoder. This is done by shifting 5 bytes in the initialization of
-`code' instead of 4. (See the `Range_decoder' constructor in the
+'code' instead of 4. (See the 'Range_decoder' constructor in the
source).
@@ -615,7 +626,7 @@ source).
After decoding the member header and obtaining the dictionary size, the
range decoder is initialized and then the LZMA decoder enters a loop
-(See `decode_member' in the source) where it invokes the range decoder
+(See 'decode_member' in the source) where it invokes the range decoder
with the appropiate contexts to decode the different coding sequences
(matches, repeated matches, and literal bytes), until the "End Of
Stream" marker is decoded.
@@ -628,49 +639,49 @@ File: lzip.info, Node: Examples, Next: Problems, Prev: Stream format, Up: To
WARNING! Even if lzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
-Therefore, if the data you are going to compress is important, give the
-`--keep' option to lzip and do not remove the original file until you
+Therefore, if the data you are going to compress are important, give the
+'--keep' option to lzip and do not remove the original file until you
verify the compressed file with a command like
-`lzip -cd file.lz | cmp file -'.
+'lzip -cd file.lz | cmp file -'.
-Example 1: Replace a regular file with its compressed version `file.lz'
+Example 1: Replace a regular file with its compressed version 'file.lz'
and show the compression ratio.
lzip -v file
-Example 2: Like example 1 but the created `file.lz' is multi-member
+Example 2: Like example 1 but the created 'file.lz' is multi-member
with a member size of 1 MiB. The compression ratio is not shown.
lzip -b 1MiB file
Example 3: Restore a regular file from its compressed version
-`file.lz'. If the operation is successful, `file.lz' is removed.
+'file.lz'. If the operation is successful, 'file.lz' is removed.
lzip -d file.lz
-Example 4: Verify the integrity of the compressed file `file.lz' and
+Example 4: Verify the integrity of the compressed file 'file.lz' and
show status.
lzip -tv file.lz
Example 5: Compress a whole floppy in /dev/fd0 and send the output to
-`file.lz'.
+'file.lz'.
lzip -c /dev/fd0 > file.lz
-Example 6: Decompress `file.lz' partially until 10 KiB of decompressed
+Example 6: Decompress 'file.lz' partially until 10 KiB of decompressed
data are produced.
lzip -cd file.lz | dd bs=1024 count=10
-Example 7: Decompress `file.lz' partially from decompressed byte 10000
+Example 7: Decompress 'file.lz' partially from decompressed byte 10000
to decompressed byte 15000 (5000 bytes are produced).
lzip -cd file.lz | dd bs=1000 skip=10 count=5
@@ -706,7 +717,7 @@ for all eternity, if not longer.
If you find a bug in lzip, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find
-by running `lzip --version'.
+by running 'lzip --version'.

File: lzip.info, Node: Reference source code, Next: Concept index, Prev: Problems, Up: Top
@@ -715,7 +726,7 @@ Appendix A Reference source code
********************************
/* Lzd - Educational decompressor for lzip files
- Copyright (C) 2013 Antonio Diaz Diaz.
+ Copyright (C) 2013, 2014 Antonio Diaz Diaz.
This program is free software: you have unlimited permission
to copy, distribute and modify it.
@@ -925,7 +936,7 @@ public:
break;
}
}
- return symbol - 0x100;
+ return symbol & 0xFF;
}
int decode_len( Len_model & lm, const int pos_state )
@@ -1092,7 +1103,7 @@ bool LZ_decoder::decode_member() // Returns false if error
}
}
state.set_match();
- if( rep0 >= dictionary_size || ( rep0 >= pos && !partial_data_pos ) )
+ if( rep0 >= dictionary_size || rep0 >= data_position() )
return false;
}
for( int i = 0; i < len; ++i )
@@ -1114,7 +1125,7 @@ int main( const int argc, const char * const argv[] )
"It is not safe to use lzd for any real work.\n"
"\nUsage: %s < file.lz > file\n", argv[0] );
std::printf( "Lzd decompresses from standard input to standard output.\n"
- "\nCopyright (C) 2013 Antonio Diaz Diaz.\n"
+ "\nCopyright (C) 2014 Antonio Diaz Diaz.\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
"Report bugs to lzip-bug@nongnu.org\n"
@@ -1125,8 +1136,7 @@ int main( const int argc, const char * const argv[] )
for( bool first_member = true; ; first_member = false )
{
File_header header;
- for( int i = 0; i < 6; ++i )
- header[i] = std::getc( stdin );
+ for( int i = 0; i < 6; ++i ) header[i] = std::getc( stdin );
if( std::feof( stdin ) || std::memcmp( header, "LZIP", 4 ) != 0 )
{
if( first_member )
@@ -1191,16 +1201,16 @@ Concept index

Tag Table:
-Node: Top210
-Node: Introduction1052
-Node: Algorithm5031
-Node: Invoking lzip7524
-Node: File format13202
-Node: Stream format15750
-Node: Examples25150
-Node: Problems27106
-Node: Reference source code27636
-Node: Concept index41139
+Node: Top208
+Node: Introduction1059
+Node: Algorithm5466
+Node: Invoking lzip7960
+Node: File format13638
+Node: Stream format16186
+Node: Examples25616
+Node: Problems27573
+Node: Reference source code28103
+Node: Concept index41592

End Tag Table
diff --git a/doc/lzip.texinfo b/doc/lzip.texi
index cfc9138..957af34 100644
--- a/doc/lzip.texinfo
+++ b/doc/lzip.texi
@@ -6,8 +6,8 @@
@finalout
@c %**end of header
-@set UPDATED 20 September 2013
-@set VERSION 1.15
+@set UPDATED 11 January 2014
+@set VERSION 1.16-pre1
@dircategory Data Compression
@direntry
@@ -47,7 +47,7 @@ This manual is for Lzip (version @value{VERSION}, @value{UPDATED}).
@end menu
@sp 1
-Copyright @copyright{} 2008, 2009, 2010, 2011, 2012, 2013
+Copyright @copyright{} 2008, 2009, 2010, 2011, 2012, 2013, 2014
Antonio Diaz Diaz.
This manual is free documentation: you have unlimited permission
@@ -59,23 +59,28 @@ to copy, distribute and modify it.
@cindex introduction
Lzip is a lossless data compressor with a user interface similar to the
-one of gzip or bzip2. Lzip decompresses almost as fast as gzip and
-compresses more than bzip2, which makes it well suited for software
-distribution and data archiving. Lzip is a clean implementation of the
-LZMA algorithm.
+one of gzip or bzip2. Lzip is about as fast as gzip, compresses most
+files more than bzip2, and is better than both from a data recovery
+perspective. Lzip is a clean implementation of the LZMA algorithm.
The lzip file format is designed for long-term data archiving and
-provides very safe integrity checking. The member trailer stores the
-32-bit CRC of the original data, the size of the original data and the
-size of the member. These values, together with the value remaining in
-the range decoder and the end-of-stream marker, provide a 4 factor
-integrity checking which guarantees that the decompressed version of the
-data is identical to the original. This guards against corruption of the
-compressed data, and against undetected bugs in lzip (hopefully very
-unlikely). The chances of data corruption going undetected are
-microscopic. Be aware, though, that the check occurs upon decompression,
-so it can only tell you that something is wrong. It can't help you
-recover the original uncompressed data.
+provides very safe integrity checking. It is as simple as possible (but
+not simpler), so that with the only help of the lzip manual it would be
+possible for a digital archaeologist to extract the data from a lzip
+file long after quantum computers eventually render LZMA obsolete.
+Additionally lzip is copylefted, which guarantees that it will remain
+free forever.
+
+The member trailer stores the 32-bit CRC of the original data, the size
+of the original data and the size of the member. These values, together
+with the value remaining in the range decoder and the end-of-stream
+marker, provide a 4 factor integrity checking which guarantees that the
+decompressed version of the data is identical to the original. This
+guards against corruption of the compressed data, and against undetected
+bugs in lzip (hopefully very unlikely). The chances of data corruption
+going undetected are microscopic. Be aware, though, that the check
+occurs upon decompression, so it can only tell you that something is
+wrong. It can't help you recover the original uncompressed data.
If you ever need to recover data from a damaged lzip file, try the
lziprecover program. Lziprecover makes lzip files resistant to bit-flip
@@ -87,12 +92,25 @@ Lzip uses the same well-defined exit status values used by bzip2, which
makes it safer than compressors returning ambiguous warning values (like
gzip) when it is used as a back end for tar or zutils.
-Lzip replaces every file given in the command line with a compressed
-version of itself, with the name "original_name.lz". Each compressed
-file has the same modification date, permissions, and, when possible,
-ownership as the corresponding original, so that these properties can be
-correctly restored at decompression time. Lzip is able to read from some
-types of non regular files if the @samp{--stdout} option is specified.
+When compressing, lzip replaces every file given in the command line
+with a compressed version of itself, with the name "original_name.lz".
+When decompressing, lzip attempts to guess the name for the decompressed
+file from that of the compressed file as follows:
+
+@multitable {anyothername} {becomes} {anyothername.out}
+@item filename.lz @tab becomes @tab filename
+@item filename.tlz @tab becomes @tab filename.tar
+@item anyothername @tab becomes @tab anyothername.out
+@end multitable
+
+(De)compressing a file is much like copying or moving it; therefore lzip
+preserves the access and modification dates, permissions, and, when
+possible, ownership of the file just as "cp -p" does. (If the user ID or
+the group ID can't be duplicated, the file permission bits S_ISUID and
+S_ISGID are cleared).
+
+Lzip is able to read from some types of non regular files if the
+@samp{--stdout} option is specified.
If no file names are specified, lzip compresses (or decompresses) from
standard input to standard output. In this case, lzip will decline to
@@ -118,23 +136,14 @@ The amount of memory required for compression is about 1 or 2 times the
dictionary size limit (1 if input file size is less than dictionary size
limit, else 2) plus 9 times the dictionary size really used. The option
@samp{-0} is special and only requires about 1.5 MiB at most. The amount
-of memory required for decompression is only a few tens of KiB larger
-than the dictionary size really used.
+of memory required for decompression is about 46 kB larger than the
+dictionary size really used.
Lzip will automatically use the smallest possible dictionary size
without exceeding the given limit. Keep in mind that the decompression
memory requirement is affected at compression time by the choice of
dictionary size limit.
-When decompressing, lzip attempts to guess the name for the decompressed
-file from that of the compressed file as follows:
-
-@multitable {anyothername} {becomes} {anyothername.out}
-@item filename.lz @tab becomes @tab filename
-@item filename.tlz @tab becomes @tab filename.tar
-@item anyothername @tab becomes @tab anyothername.out
-@end multitable
-
@node Algorithm
@chapter Algorithm
@@ -179,7 +188,7 @@ price represents the number of output bits produced.
6) The range encoder encodes the sequence produced by the main encoder
and sends the produced bytes to the output stream.
-7) Go back to step 3 until the input data is finished or until the
+7) Go back to step 3 until the input data are finished or until the
member or volume size limits are reached.
8) The range encoder is flushed.
@@ -566,14 +575,14 @@ byte. @samp{rep} is any one of @samp{rep0}, @samp{rep1}, @samp{rep2} or
@samp{rep3}. The types of previous sequences corresponding to each state
are:
-@multitable {State} {literal, shortrep, literal, literal}
+@multitable {State} {rep or (!literal, shortrep), literal, literal}
@headitem State @tab Types of previous sequences
@item 0 @tab literal, literal, literal
@item 1 @tab match, literal, literal
-@item 2 @tab (rep or shortrep), literal, literal
+@item 2 @tab rep or (!literal, shortrep), literal, literal
@item 3 @tab literal, shortrep, literal, literal
@item 4 @tab match, literal
-@item 5 @tab (rep or shortrep), literal
+@item 5 @tab rep or (!literal, shortrep), literal
@item 6 @tab literal, shortrep, literal
@item 7 @tab literal, match
@item 8 @tab literal, rep
@@ -667,7 +676,7 @@ Of Stream" marker is decoded.
WARNING! Even if lzip is bug-free, other causes may result in a corrupt
compressed file (bugs in the system libraries, memory errors, etc).
-Therefore, if the data you are going to compress is important, give the
+Therefore, if the data you are going to compress are important, give the
@samp{--keep} option to lzip and do not remove the original file until
you verify the compressed file with a command like
@w{@samp{lzip -cd file.lz | cmp file -}}.
@@ -785,7 +794,7 @@ find by running @w{@samp{lzip --version}}.
@verbatim
/* Lzd - Educational decompressor for lzip files
- Copyright (C) 2013 Antonio Diaz Diaz.
+ Copyright (C) 2013, 2014 Antonio Diaz Diaz.
This program is free software: you have unlimited permission
to copy, distribute and modify it.
@@ -995,7 +1004,7 @@ public:
break;
}
}
- return symbol - 0x100;
+ return symbol & 0xFF;
}
int decode_len( Len_model & lm, const int pos_state )
@@ -1162,7 +1171,7 @@ bool LZ_decoder::decode_member() // Returns false if error
}
}
state.set_match();
- if( rep0 >= dictionary_size || ( rep0 >= pos && !partial_data_pos ) )
+ if( rep0 >= dictionary_size || rep0 >= data_position() )
return false;
}
for( int i = 0; i < len; ++i )
@@ -1184,7 +1193,7 @@ int main( const int argc, const char * const argv[] )
"It is not safe to use lzd for any real work.\n"
"\nUsage: %s < file.lz > file\n", argv[0] );
std::printf( "Lzd decompresses from standard input to standard output.\n"
- "\nCopyright (C) 2013 Antonio Diaz Diaz.\n"
+ "\nCopyright (C) 2014 Antonio Diaz Diaz.\n"
"This is free software: you are free to change and redistribute it.\n"
"There is NO WARRANTY, to the extent permitted by law.\n"
"Report bugs to lzip-bug@nongnu.org\n"
@@ -1195,8 +1204,7 @@ int main( const int argc, const char * const argv[] )
for( bool first_member = true; ; first_member = false )
{
File_header header;
- for( int i = 0; i < 6; ++i )
- header[i] = std::getc( stdin );
+ for( int i = 0; i < 6; ++i ) header[i] = std::getc( stdin );
if( std::feof( stdin ) || std::memcmp( header, "LZIP", 4 ) != 0 )
{
if( first_member )