From 3f2a7dc31b4309fbd1a946b0fc3317764f0eb905 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <mail@daniel-baumann.ch>
Date: Sat, 7 Nov 2015 11:00:31 +0100
Subject: Adding upstream version 1.15.

Signed-off-by: Daniel Baumann <mail@daniel-baumann.ch>
---
 doc/lzip.texinfo | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

(limited to 'doc/lzip.texinfo')

diff --git a/doc/lzip.texinfo b/doc/lzip.texinfo
index 0e8ac92..cfc9138 100644
--- a/doc/lzip.texinfo
+++ b/doc/lzip.texinfo
@@ -6,8 +6,8 @@
 @finalout
 @c %**end of header
 
-@set UPDATED 1 August 2013
-@set VERSION 1.15-rc1
+@set UPDATED 20 September 2013
+@set VERSION 1.15
 
 @dircategory Data Compression
 @direntry
@@ -84,8 +84,8 @@ recovery capabilities, including error-checked merging of damaged copies
 of a file.
 
 Lzip uses the same well-defined exit status values used by bzip2, which
-makes it safer when used in pipes or scripts than compressors returning
-ambiguous warning values, like gzip.
+makes it safer than compressors returning ambiguous warning values (like
+gzip) when it is used as a back end for tar or zutils.
 
 Lzip replaces every file given in the command line with a compressed
 version of itself, with the name "original_name.lz". Each compressed
@@ -300,7 +300,7 @@ Use it together with @samp{-v} to see information about the file.
 @itemx --verbose
 Verbose mode.@*
 When compressing, show the compression ratio for each file processed. A
-second -v shows the progress of compression.@*
+second @samp{-v} shows the progress of compression.@*
 When decompressing or testing, further -v's (up to 4) increase the
 verbosity level, showing status, compression ratio, dictionary size,
 trailer contents (CRC, data size, member size), and up to 6 bytes of
@@ -554,9 +554,9 @@ decoded data.
 @item literal_state
 Value of the 3 most significant bits of the latest byte decoded.
 
-@item dis_state
-Coded value of length (real length - 2), with a maximum of 3. The
-resulting value is in the range 0 to 3.
+@item len_state
+Coded value of length (length - 2), with a maximum of 3. The resulting
+value is in the range 0 to 3.
 
 @end table
 
@@ -600,7 +600,7 @@ The contexts for decoding distances are:
 
 @multitable @columnfractions .2 .4 .4
 @headitem Name @tab Indices @tab Used when
-@item bm_dis_slot @tab dis_state, bit tree @tab distance start
+@item bm_dis_slot @tab len_state, bit tree @tab distance start
 @item bm_dis @tab reverse bit tree @tab after slots 4 to 13
 @item bm_align @tab reverse bit tree @tab for distances >= 128, after
 fixed probability bits
@@ -765,7 +765,7 @@ lzip -b 32MiB -S 650MB big_db
 
 
 @node Problems
-@chapter Reporting Bugs
+@chapter Reporting bugs
 @cindex bugs
 @cindex getting help
 
@@ -838,6 +838,7 @@ enum {
   pos_states = 1 << pos_state_bits,
   pos_state_mask = pos_states - 1,
 
+  len_states = 4,
   dis_slot_bits = 6,
   start_dis_model = 4,
   end_dis_model = 14,
@@ -854,7 +855,6 @@ enum {
   max_len_symbols = len_low_symbols + len_mid_symbols + len_high_symbols,
 
   min_match_len = 2,					// must be 2
-  max_dis_states = 4,
 
   bit_model_move_bits = 5,
   bit_model_total_bits = 11,
@@ -1081,7 +1081,7 @@ bool LZ_decoder::decode_member()		// Returns false if error
   Bit_model bm_rep1[State::states];
   Bit_model bm_rep2[State::states];
   Bit_model bm_len[State::states][pos_states];
-  Bit_model bm_dis_slot[max_dis_states][1<<dis_slot_bits];
+  Bit_model bm_dis_slot[len_states][1<<dis_slot_bits];
   Bit_model bm_dis[modeled_distances-end_dis_model];
   Bit_model bm_align[dis_align_size];
   Len_model match_len_model;
@@ -1109,9 +1109,9 @@ bool LZ_decoder::decode_member()		// Returns false if error
     else
       {
       int len;
-      if( rdec.decode_bit( bm_rep[state()] ) == 1 )		// 2nd bit
+      if( rdec.decode_bit( bm_rep[state()] ) != 0 )		// 2nd bit
         {
-        if( rdec.decode_bit( bm_rep0[state()] ) == 1 )		// 3rd bit
+        if( rdec.decode_bit( bm_rep0[state()] ) != 0 )		// 3rd bit
           {
           unsigned distance;
           if( rdec.decode_bit( bm_rep1[state()] ) == 0 )	// 4th bit
@@ -1132,16 +1132,16 @@ bool LZ_decoder::decode_member()		// Returns false if error
           if( rdec.decode_bit( bm_len[state()][pos_state] ) == 0 ) // 4th bit
             { state.set_short_rep(); put_byte( get_byte( rep0 ) ); continue; }
           }
-        len = min_match_len + rdec.decode_len( rep_len_model, pos_state );
         state.set_rep();
+        len = min_match_len + rdec.decode_len( rep_len_model, pos_state );
         }
       else
         {
         rep3 = rep2; rep2 = rep1; rep1 = rep0;
         len = min_match_len + rdec.decode_len( match_len_model, pos_state );
-        const int dis_state = std::min( len - min_match_len, max_dis_states - 1 );
+        const int len_state = std::min( len - min_match_len, len_states - 1 );
         const int dis_slot =
-          rdec.decode_tree( bm_dis_slot[dis_state], dis_slot_bits );
+          rdec.decode_tree( bm_dis_slot[len_state], dis_slot_bits );
         if( dis_slot < start_dis_model ) rep0 = dis_slot;
         else
           {
-- 
cgit v1.2.3