From c1d52a1872e15fa64d68cbc317e51fdbdcfa13b9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 7 Nov 2015 11:23:59 +0100 Subject: Adding upstream version 1.14. Signed-off-by: Daniel Baumann --- ChangeLog | 18 +++++------------- INSTALL | 5 +++-- NEWS | 2 ++ configure | 38 ++++++++++++++++++++++++++++---------- doc/lziprecover.1 | 7 ++++++- doc/lziprecover.info | 32 +++++++++++++++++--------------- doc/lziprecover.texinfo | 20 ++++++++++---------- main.cc | 6 +++++- range_dec.cc | 5 ++--- 9 files changed, 78 insertions(+), 55 deletions(-) diff --git a/ChangeLog b/ChangeLog index d318b5b..acbbb44 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,21 +1,13 @@ -2013-04-26 Antonio Diaz Diaz +2013-05-31 Antonio Diaz Diaz - * Version 1.14-rc3 released. + * Version 1.14 released. * Added new option '-i, --ignore-errors'. + * Option '-l, --list' now accepts more than one file. + * Decompression time has been reduced by 12%. * split.cc: Use as few digits as possible in file names. * split.cc: In verbose mode show names of files being created. - -2013-03-25 Antonio Diaz Diaz - - * Version 1.14-rc2 released. - * Minor fixes. * main.cc (show_header): Show header version if verbosity >= 4. - -2013-02-27 Antonio Diaz Diaz - - * Version 1.14-rc1 released. - * Option '-l, --list' now accepts more than one file. - * Decompression time has been reduced by 12%. + * configure: Options now accept a separate argument. * Makefile.in: Added new target 'install-as-lzip'. * Makefile.in: Added new target 'install-bin'. * main.cc: Use 'setmode' instead of '_setmode' on Windows and OS/2. diff --git a/INSTALL b/INSTALL index b469ec2..cc04763 100644 --- a/INSTALL +++ b/INSTALL @@ -37,8 +37,9 @@ from the main archive. typing 'make install-bin', 'make install-info' or 'make install-man' respectively. -5a. Type 'make install-as-lzip' to install the program and any data - files and documentation, and link the program to the name 'lzip'. + Instead of 'make install', you can type 'make install-as-lzip' to + install the program and any data files and documentation, and link + the program to the name 'lzip'. Another way diff --git a/NEWS b/NEWS index f3a9b7d..1558dc8 100644 --- a/NEWS +++ b/NEWS @@ -16,6 +16,8 @@ produced, depending on the number of members in the input file. When decompressing or testing, file version is now shown only if verbosity >= 4. +"configure" now accepts options with a separate argument. + The target "install-as-lzip" has been added to the Makefile. The target "install-bin" has been added to the Makefile. diff --git a/configure b/configure index 1ad8495..7faf560 100755 --- a/configure +++ b/configure @@ -5,10 +5,8 @@ # This configure script is free software: you have unlimited permission # to copy, distribute and modify it. -args= -no_create= pkgname=lziprecover -pkgversion=1.14-rc3 +pkgversion=1.14 progname=lziprecover srctrigger=doc/lziprecover.texinfo @@ -28,18 +26,19 @@ CXXFLAGS='-Wall -W -O2' LDFLAGS= # checking whether we are using GNU C++. -if [ ! -x /bin/g++ ] && - [ ! -x /usr/bin/g++ ] && - [ ! -x /usr/local/bin/g++ ] ; then +${CXX} --version > /dev/null 2>&1 +if [ $? != 0 ] ; then CXX=c++ CXXFLAGS='-W -O2' fi # Loop over all args -while [ -n "$1" ] ; do +args= +no_create= +while [ $# != 0 ] ; do # Get the first arg, and shuffle - option=$1 + option=$1 ; arg2=no shift # Add the argument quoted to args @@ -74,6 +73,14 @@ while [ -n "$1" ] ; do --version | -V) echo "Configure script for ${pkgname} version ${pkgversion}" exit 0 ;; + --srcdir) srcdir=$1 ; arg2=yes ;; + --prefix) prefix=$1 ; arg2=yes ;; + --exec-prefix) exec_prefix=$1 ; arg2=yes ;; + --bindir) bindir=$1 ; arg2=yes ;; + --datarootdir) datarootdir=$1 ; arg2=yes ;; + --infodir) infodir=$1 ; arg2=yes ;; + --mandir) mandir=$1 ; arg2=yes ;; + --srcdir=*) srcdir=${optarg} ;; --prefix=*) prefix=${optarg} ;; --exec-prefix=*) exec_prefix=${optarg} ;; @@ -88,11 +95,22 @@ while [ -n "$1" ] ; do CXXFLAGS=*) CXXFLAGS=${optarg} ;; LDFLAGS=*) LDFLAGS=${optarg} ;; - --* | *=* | *-*-*) ;; + --*) + echo "configure: WARNING: unrecognized option: '${option}'" 1>&2 ;; + *=* | *-*-*) ;; *) - echo "configure: Unrecognized option: \"${option}\"; use --help for usage." 1>&2 + echo "configure: unrecognized option: '${option}'" 1>&2 + echo "Try 'configure --help' for more information." exit 1 ;; esac + + # Check if the option took a separate argument + if [ "${arg2}" = yes ] ; then + if [ $# != 0 ] ; then args="${args} \"$1\"" ; shift + else echo "configure: Missing argument to '${option}'" 1>&2 + exit 1 + fi + fi done # Find the source files, if location was not specified. diff --git a/doc/lziprecover.1 b/doc/lziprecover.1 index 70e4c67..f62094a 100644 --- a/doc/lziprecover.1 +++ b/doc/lziprecover.1 @@ -1,5 +1,5 @@ .\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.37.1. -.TH LZIPRECOVER "1" "April 2013" "Lziprecover 1.14-rc3" "User Commands" +.TH LZIPRECOVER "1" "May 2013" "Lziprecover 1.14" "User Commands" .SH NAME Lziprecover \- recovers data from damaged lzip files .SH SYNOPSIS @@ -59,6 +59,11 @@ be verbose (a 2nd \fB\-v\fR gives more) .PP Numbers may be followed by a multiplier: k = kB = 10^3 = 1000, Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc... +.PP +Exit status: 0 for a normal exit, 1 for environmental problems (file +not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or +invalid input file, 3 for an internal consistency error (eg, bug) which +caused lziprecover to panic. .SH "REPORTING BUGS" Report bugs to lzip\-bug@nongnu.org .br diff --git a/doc/lziprecover.info b/doc/lziprecover.info index 5c2628f..83267d5 100644 --- a/doc/lziprecover.info +++ b/doc/lziprecover.info @@ -12,7 +12,7 @@ File: lziprecover.info, Node: Top, Next: Introduction, Up: (dir) Lziprecover Manual ****************** -This manual is for Lziprecover (version 1.14-rc3, 23 April 2013). +This manual is for Lziprecover (version 1.14, 31 May 2013). * Menu: @@ -72,11 +72,6 @@ garbage data at the end): GNU ddrescue + lziprecover is the best option for recovering data from multiple damaged copies. *Note ddrescue-example::, for an example. - Return values: 0 for a normal exit, 1 for environmental problems -(file not found, invalid flags, I/O errors, etc), 2 to indicate a -corrupt or invalid input file, 3 for an internal consistency error (eg, -bug) which caused lziprecover to panic. -  File: lziprecover.info, Node: Invoking Lziprecover, Next: File Format, Prev: Introduction, Up: Top @@ -225,6 +220,12 @@ E exabyte (10^18) | Ei exbibyte (2^60) Z zettabyte (10^21) | Zi zebibyte (2^70) Y yottabyte (10^24) | Yi yobibyte (2^80) + + Exit status: 0 for a normal exit, 1 for environmental problems (file +not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or +invalid input file, 3 for an internal consistency error (eg, bug) which +caused lziprecover to panic. +  File: lziprecover.info, Node: File Format, Next: Examples, Prev: Invoking Lziprecover, Up: Top @@ -282,7 +283,8 @@ additional information before, between, or after them. `Lzma stream' The lzma stream, finished by an end of stream marker. Uses default - values for encoder properties. + values for encoder properties. See the lzip manual for a full + description. `CRC32 (4 bytes)' CRC of the uncompressed original data. @@ -318,7 +320,7 @@ show status. Example 3: Decompress `file.lz' partially until 10KiB of decompressed data are produced. - lziprecover -D 10KiB file.lz + lziprecover -D 0,10KiB file.lz Example 4: Decompress `file.lz' partially from decompressed byte 10000 @@ -419,13 +421,13 @@ Concept Index  Tag Table: Node: Top231 -Node: Introduction907 -Node: Invoking Lziprecover2938 -Node: File Format8454 -Node: Examples10896 -Ref: ddrescue-example12114 -Node: Problems13894 -Node: Concept Index14444 +Node: Introduction901 +Node: Invoking Lziprecover2685 +Node: File Format8447 +Node: Examples10938 +Ref: ddrescue-example12158 +Node: Problems13938 +Node: Concept Index14488  End Tag Table diff --git a/doc/lziprecover.texinfo b/doc/lziprecover.texinfo index 9c1612c..142cdae 100644 --- a/doc/lziprecover.texinfo +++ b/doc/lziprecover.texinfo @@ -6,8 +6,8 @@ @finalout @c %**end of header -@set UPDATED 23 April 2013 -@set VERSION 1.14-rc3 +@set UPDATED 31 May 2013 +@set VERSION 1.14 @dircategory Data Compression @direntry @@ -93,11 +93,6 @@ If the cause of file corruption is damaged media, the combination @w{GNU ddrescue + lziprecover} is the best option for recovering data from multiple damaged copies. @xref{ddrescue-example}, for an example. -Return values: 0 for a normal exit, 1 for environmental problems (file -not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or -invalid input file, 3 for an internal consistency error (eg, bug) which -caused lziprecover to panic. - @node Invoking Lziprecover @chapter Invoking Lziprecover @@ -166,7 +161,6 @@ Print total file sizes and ratios. The values produced are correct even for multi-member files. Use it together with @samp{-v} to see information about the members in the file. - @item -m @itemx --merge Try to produce a correct file merging the good parts of two or more @@ -251,6 +245,12 @@ Table of SI and binary prefixes (unit multipliers): @item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80) @end multitable +@sp 1 +Exit status: 0 for a normal exit, 1 for environmental problems (file not +found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or +invalid input file, 3 for an internal consistency error (eg, bug) which +caused lziprecover to panic. + @node File Format @chapter File Format @@ -311,7 +311,7 @@ Valid values for dictionary size range from 4KiB to 512MiB. @item Lzma stream The lzma stream, finished by an end of stream marker. Uses default values -for encoder properties. +for encoder properties. See the lzip manual for a full description. @item CRC32 (4 bytes) CRC of the uncompressed original data. @@ -354,7 +354,7 @@ Example 3: Decompress @samp{file.lz} partially until 10KiB of decompressed data are produced. @example -lziprecover -D 10KiB file.lz +lziprecover -D 0,10KiB file.lz @end example @sp 1 diff --git a/main.cc b/main.cc index 459ed05..b3e6474 100644 --- a/main.cc +++ b/main.cc @@ -15,7 +15,7 @@ along with this program. If not, see . */ /* - Return values: 0 for a normal exit, 1 for environmental problems + Exit status: 0 for a normal exit, 1 for environmental problems (file not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or invalid input file, 3 for an internal consistency error (eg, bug) which caused lziprecover to panic. @@ -117,6 +117,10 @@ void show_help() " -v, --verbose be verbose (a 2nd -v gives more)\n" "Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,\n" "Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...\n" + "\nExit status: 0 for a normal exit, 1 for environmental problems (file\n" + "not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or\n" + "invalid input file, 3 for an internal consistency error (eg, bug) which\n" + "caused lziprecover to panic.\n" "\nReport bugs to lzip-bug@nongnu.org\n" "Lziprecover home page: http://www.nongnu.org/lzip/lziprecover.html\n" ); } diff --git a/range_dec.cc b/range_dec.cc index 51eeb47..59be01f 100644 --- a/range_dec.cc +++ b/range_dec.cc @@ -190,17 +190,16 @@ int list_file( const std::string & input_filename, const Pretty_print & pp ) if( pp.verbosity() >= 1 && file_index.members() > 1 ) { - std::printf( "Total members in file = %d.\n", file_index.members() ); + std::printf( " Total members in file = %d.\n", file_index.members() ); if( pp.verbosity() >= 2 ) for( int i = 0; i < file_index.members(); ++i ) { const Block & db = file_index.dblock( i ); const Block & mb = file_index.mblock( i ); - std::printf( "Member %3d data pos %9llu data size %7llu " + std::printf( " Member %3d data pos %9llu data size %7llu " "member pos %9llu member size %7llu.\n", i + 1, db.pos(), db.size(), mb.pos(), mb.size() ); } - std::printf( "\n" ); } } return 0; -- cgit v1.2.3