From 2085b1344e4c2b3c4a3d21d4bc10227679a55507 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sat, 7 Nov 2015 12:45:12 +0100 Subject: Merging upstream version 1.16~pre1. Signed-off-by: Daniel Baumann --- doc/lziprecover.texinfo | 589 ------------------------------------------------ 1 file changed, 589 deletions(-) delete mode 100644 doc/lziprecover.texinfo (limited to 'doc/lziprecover.texinfo') diff --git a/doc/lziprecover.texinfo b/doc/lziprecover.texinfo deleted file mode 100644 index 3dbceb9..0000000 --- a/doc/lziprecover.texinfo +++ /dev/null @@ -1,589 +0,0 @@ -\input texinfo @c -*-texinfo-*- -@c %**start of header -@setfilename lziprecover.info -@documentencoding ISO-8859-15 -@settitle Lziprecover Manual -@finalout -@c %**end of header - -@set UPDATED 14 September 2013 -@set VERSION 1.15 - -@dircategory Data Compression -@direntry -* Lziprecover: (lziprecover). Data recovery tool for lzip files -@end direntry - - -@ifnothtml -@titlepage -@title Lziprecover -@subtitle Data recovery tool for lzip files -@subtitle for Lziprecover version @value{VERSION}, @value{UPDATED} -@author by Antonio Diaz Diaz - -@page -@vskip 0pt plus 1filll -@end titlepage - -@contents -@end ifnothtml - -@node Top -@top - -This manual is for Lziprecover (version @value{VERSION}, @value{UPDATED}). - -@menu -* Introduction:: Purpose and features of lziprecover -* Invoking lziprecover:: Command line interface -* Repairing files:: Fixing bit-flip and similar errors -* Merging files:: Fixing several damaged copies -* File format:: Detailed format of the compressed file -* Examples:: A small tutorial with examples -* Unzcrash:: Testing the robustness of decompressors -* Problems:: Reporting bugs -* Concept index:: Index of concepts -@end menu - -@sp 1 -Copyright @copyright{} 2009, 2010, 2011, 2012, 2013 Antonio Diaz Diaz. - -This manual is free documentation: you have unlimited permission -to copy, distribute and modify it. - - -@node Introduction -@chapter Introduction -@cindex introduction - -Lziprecover is a data recovery tool and decompressor for files in the -lzip compressed data format (.lz), able to repair slightly damaged -files, recover badly damaged files from two or more copies, extract data -from damaged files, decompress files and test integrity of files. - -The lzip file format is designed for long-term data archiving. It is -clean, provides very safe 4 factor integrity checking, and is backed by -the recovery capabilities of lziprecover. - -Lziprecover is able to recover or decompress files produced by any of -the compressors in the lzip family; lzip, plzip, minilzip/lzlib, clzip -and pdlzip. - -Lziprecover makes lzip files resistant to bit-flip (one of the most -common forms of data corruption), and can safely merge multiple damaged -backup copies. - -If the cause of file corruption is damaged media, the combination -@w{GNU ddrescue + lziprecover} is the best option for recovering data -from multiple damaged copies. @xref{ddrescue-example}, for an example. - -If a file is too damaged for lziprecover to repair it, all the -recoverable data in all members of the file can be extracted with the -following command (the resulting file may contain errors and some -garbage data may be produced at the end of each member): - -@example -lziprecover -D0 -i -o file -q file.lz -@end example - -Lziprecover is able to efficiently extract a range of bytes from a -multi-member file, because it only decompresses the members containing -the desired data. - -Lziprecover can print correct total file sizes and ratios even for -multi-member files. - -When recovering data, lziprecover takes as arguments the names of the -damaged files and writes zero or more recovered files depending on the -operation selected and whether the recovery succeeded or not. The -damaged files themselves are never modified. - -When decompressing or testing file integrity, lziprecover behaves like -lzip or lunzip. - -Lziprecover is not a replacement for regular backups, but a last line of -defense for the case where the backups are also damaged. - - -@node Invoking lziprecover -@chapter Invoking lziprecover -@cindex invoking - -The format for running lziprecover is: - -@example -lziprecover [@var{options}] [@var{files}] -@end example - -Lziprecover supports the following options: - -@table @samp -@item -h -@itemx --help -Print an informative help message describing the options and exit. - -@item -V -@itemx --version -Print the version number of lziprecover on the standard output and exit. - -@item -c -@itemx --stdout -Decompress to standard output. Needed when reading from a named pipe -(fifo) or from a device. Use it to recover as much of the uncompressed -data as possible when decompressing a corrupt file. - -@item -d -@itemx --decompress -Decompress. - -@item -D @var{range} -@itemx --range-decompress=@var{range} -Decompress only a range of bytes starting at decompressed byte position -@samp{@var{begin}} and up to byte position @w{@samp{@var{end} - 1}}. -Three formats of @var{range} are recognized, @samp{@var{begin}}, -@samp{@var{begin}-@var{end}}, and @samp{@var{begin},@var{size}}. If only -@var{begin} is specified, @var{end} is taken as the end of the file. The -produced bytes are sent to standard output unless the @samp{--output} -option is used. In order to guarantee the correctness of the data -produced, all members containing any part of the desired data are -decompressed and their integrity is verified. This operation is more -efficient in multi-member files because it only decompresses the members -containing the desired data. - -@item -f -@itemx --force -Force overwrite of output files. - -@item -i -@itemx --ignore-errors -Make @samp{--range-decompress} ignore data errors and continue -decompressing the remaining members in the file. For example, -@w{@samp{lziprecover -i -D0 file.lz > file}} decompresses all the -recoverable data in all members of @samp{file.lz} without having to -split it first. - -@item -k -@itemx --keep -Keep (don't delete) input files during decompression. - -@item -l -@itemx --list -Print total file sizes and ratios. The values produced are correct even -for multi-member files. Use it together with @samp{-v} to see -information about the members in the file. - -@item -m -@itemx --merge -Try to produce a correct file merging the good parts of two or more -damaged copies. If successful, a repaired copy is written to the file -@samp{@var{file}_fixed.lz}. The exit status is 0 if a correct file could -be produced, 2 otherwise. See the chapter @samp{Merging files} -(@pxref{Merging files}) for a complete description of the merge mode. - -@item -o @var{file} -@itemx --output=@var{file} -Place the output into @samp{@var{file}} instead of into -@samp{@var{file}_fixed.lz}. If splitting, the names of the files -produced are in the form @samp{rec01@var{file}}, @samp{rec02@var{file}}, -etc. If decompressing from standard input and @samp{--stdout} has not -been specified, use @samp{@var{file}} as the name of the decompressed -file. - -@item -q -@itemx --quiet -Quiet operation. Suppress all messages. - -@item -R -@itemx --repair -Try to repair a file with small errors (up to one byte error per -member). If successful, a repaired copy is written to the file -@samp{@var{file}_fixed.lz}. @samp{@var{file}} is not modified at all. -The exit status is 0 if the file could be repaired, 2 otherwise. See the -chapter @samp{Repairing files} (@pxref{Repairing files}) for a complete -description of the repair mode. - -@item -s -@itemx --split -Search for members in @samp{@var{file}} and write each member in its own -@samp{.lz} file. You can then use @samp{lziprecover -t} to test the -integrity of the resulting files, decompress those which are undamaged, -and try to repair or partially decompress those which are damaged. - -The names of the files produced are in the form -@samp{rec01@var{file}.lz}, @samp{rec02@var{file}.lz}, etc, and are -designed so that the use of wildcards in subsequent processing, for -example, @w{@samp{lziprecover -cd rec*@var{file}.lz > recovered_data}}, -processes the files in the correct order. The number of digits used in -the names varies depending on the number of members in @samp{@var{file}}. - -@item -t -@itemx --test -Check integrity of the specified file(s), but don't decompress them. -This really performs a trial decompression and throws away the result. -Use it together with @samp{-v} to see information about the file. - -@item -v -@itemx --verbose -Verbose mode.@* -When decompressing or testing, further -v's (up to 4) increase the -verbosity level, showing status, compression ratio, dictionary size, -trailer contents (CRC, data size, member size), and up to 6 bytes of -trailing garbage (if any). - -@end table - -Numbers given as arguments to options may be followed by a multiplier -and an optional @samp{B} for "byte". - -Table of SI and binary prefixes (unit multipliers): - -@multitable {Prefix} {kilobyte (10^3 = 1000)} {|} {Prefix} {kibibyte (2^10 = 1024)} -@item Prefix @tab Value @tab | @tab Prefix @tab Value -@item k @tab kilobyte (10^3 = 1000) @tab | @tab Ki @tab kibibyte (2^10 = 1024) -@item M @tab megabyte (10^6) @tab | @tab Mi @tab mebibyte (2^20) -@item G @tab gigabyte (10^9) @tab | @tab Gi @tab gibibyte (2^30) -@item T @tab terabyte (10^12) @tab | @tab Ti @tab tebibyte (2^40) -@item P @tab petabyte (10^15) @tab | @tab Pi @tab pebibyte (2^50) -@item E @tab exabyte (10^18) @tab | @tab Ei @tab exbibyte (2^60) -@item Z @tab zettabyte (10^21) @tab | @tab Zi @tab zebibyte (2^70) -@item Y @tab yottabyte (10^24) @tab | @tab Yi @tab yobibyte (2^80) -@end multitable - -@sp 1 -Exit status: 0 for a normal exit, 1 for environmental problems (file not -found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or -invalid input file, 3 for an internal consistency error (eg, bug) which -caused lziprecover to panic. - - -@node Repairing files -@chapter Repairing files -@cindex repairing files - -Lziprecover is able to repair files with small errors (up to one byte -error per member). The error may be located anywhere in the file except -in the header (first 6 bytes of each member) or in the @samp{Member -size} field of the trailer (last 8 bytes of each member). This makes -lzip files resistant to bit-flip, one of the most common forms of data -corruption. - -Bit-flip happens when one bit in the file is changed from 0 to 1 or vice -versa. It may be caused by bad RAM or even by natural radiation. I have -seen a case of bit-flip in a file stored in an USB flash drive. - - -@node Merging files -@chapter Merging files -@cindex merging files - -If you have several copies of a file but all of them are too damaged to -repair them (@pxref{Repairing files}), lziprecover can try to produce a -correct file merging the good parts of the damaged copies. - -The merge may succeed even if some copies of the file have all the -headers and trailers damaged, as long as there is at least one copy of -every header and trailer intact, even if they are in different copies of -the file. - -The merge will fail if the damaged areas overlap (at least one byte is -damaged in all copies), or are adjacent and the boundary can't be -determined, or if the copies have too many damaged areas. - -All the copies must have the same size. If some of them have been -truncated and are therefore smaller than they should, you can extend -them to the correct size with the following command before merging them -with the other copies: - -@example -ddrescue --extend-outfile= small_file.lz extended_file.lz -@end example - -If some of the copies have got garbage data at the end and are therefore -larger than they should, you can reduce their sizes to the correct value -with the following command before merging them with the other copies: - -@example -ddrescue --size= large_file.lz reduced_file.lz -@end example - -To give you an idea of its possibilities, when merging two copies, each -of them with one damaged area affecting 1 percent of the copy, the -probability of obtaining a correct file is about 98 percent. With three -such copies the probability rises to 99.97 percent. For large files (a -few MB) with small errors (one sector damaged per copy), the probability -approaches 100 percent even with only two copies. - - -@node File format -@chapter File format -@cindex file format - -Perfection is reached, not when there is no longer anything to add, but -when there is no longer anything to take away.@* ---- Antoine de Saint-Exupery - -@sp 1 -In the diagram below, a box like this: -@verbatim -+---+ -| | <-- the vertical bars might be missing -+---+ -@end verbatim - -represents one byte; a box like this: -@verbatim -+==============+ -| | -+==============+ -@end verbatim - -represents a variable number of bytes. - -@sp 1 -A lzip file consists of a series of "members" (compressed data sets). -The members simply appear one after another in the file, with no -additional information before, between, or after them. - -Each member has the following structure: -@verbatim -+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -| ID string | VN | DS | Lzma stream | CRC32 | Data size | Member size | -+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -@end verbatim - -All multibyte values are stored in little endian order. - -@table @samp -@item ID string -A four byte string, identifying the lzip format, with the value "LZIP" -(0x4C, 0x5A, 0x49, 0x50). - -@item VN (version number, 1 byte) -Just in case something needs to be modified in the future. 1 for now. - -@item DS (coded dictionary size, 1 byte) -Lzip divides the distance between any two powers of 2 into 8 equally -spaced intervals, named "wedges". The dictionary size is calculated by -taking a power of 2 (the base size) and substracting from it a number of -wedges between 0 and 7. The size of a wedge is (base_size / 16).@* -Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).@* -Bits 7-5 contain the number of wedges (0 to 7) to substract from the -base size to obtain the dictionary size.@* -Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB@* -Valid values for dictionary size range from 4 KiB to 512 MiB. - -@item Lzma stream -The lzma stream, finished by an end of stream marker. Uses default values -for encoder properties. See the lzip manual for a full description. - -@item CRC32 (4 bytes) -CRC of the uncompressed original data. - -@item Data size (8 bytes) -Size of the uncompressed original data. - -@item Member size (8 bytes) -Total size of the member, including header and trailer. This field acts -as a distributed index, allows the verification of stream integrity, and -facilitates safe recovery of undamaged members from multi-member files. - -@end table - - -@node Examples -@chapter A small tutorial with examples -@cindex examples - -Example 1: Restore a regular file from its compressed version -@samp{file.lz}. If the operation is successful, @samp{file.lz} is -removed. - -@example -lziprecover -d file.lz -@end example - -@sp 1 -@noindent -Example 2: Verify the integrity of the compressed file @samp{file.lz} -and show status. - -@example -lziprecover -tv file.lz -@end example - -@sp 1 -@noindent -Example 3: Decompress @samp{file.lz} partially until 10 KiB of -decompressed data are produced. - -@example -lziprecover -D 0,10KiB file.lz -@end example - -@sp 1 -@noindent -Example 4: Decompress @samp{file.lz} partially from decompressed byte -10000 to decompressed byte 15000 (5000 bytes are produced). - -@example -lziprecover -D 10000-15000 file.lz -@end example - -@sp 1 -@noindent -Example 5: Repair small errors in the file @samp{file.lz}. (Indented -lines are abridged diagnostic messages from lziprecover). - -@example -lziprecover -v -R file.lz - Copy of input file repaired successfully. -mv file_fixed.lz file.lz -@end example - -@sp 1 -@noindent -Example 6: Split the multi-member file @samp{file.lz} and write each -member in its own @samp{recXXXfile.lz} file. Then use -@w{@samp{lziprecover -t}} to test the integrity of the resulting files. - -@example -lziprecover -s file.lz -lziprecover -tv rec*file.lz -@end example - -@sp 1 -@anchor{ddrescue-example} -@noindent -Example 7: Recover a compressed backup from two copies on CD-ROM with -error-checked merging of copies -@ifnothtml -(@xref{Top,GNU ddrescue manual,,ddrescue}, -@end ifnothtml -@ifhtml -(See the -@uref{http://www.gnu.org/software/ddrescue/manual/ddrescue_manual.html,,ddrescue manual} -@end ifhtml -for details about ddrescue). - -@example -ddrescue -b2048 /dev/cdrom cdimage1 logfile1 -mount -t iso9660 -o loop,ro cdimage1 /mnt/cdimage -cp /mnt/cdimage/backup.tar.lz rescued1.tar.lz -umount /mnt/cdimage - (insert second copy in the CD drive) -ddrescue -b2048 /dev/cdrom cdimage2 logfile2 -mount -t iso9660 -o loop,ro cdimage2 /mnt/cdimage -cp /mnt/cdimage/backup.tar.lz rescued2.tar.lz -umount /mnt/cdimage -lziprecover -m -v -o backup.tar.lz rescued1.tar.lz rescued2.tar.lz -@end example - -@sp 1 -@noindent -Example 8: Recover the first volume of those created with the command -@w{@samp{lzip -b 32MiB -S 650MB big_db}} from two copies, -@samp{big_db1_00001.lz} and @samp{big_db2_00001.lz}, with member 07 -damaged in the first copy, member 18 damaged in the second copy, and -member 12 damaged in both copies. The correct file produced is saved in -@samp{big_db_00001.lz}. - -@example -lziprecover -m -v -o big_db_00001.lz big_db1_00001.lz big_db2_00001.lz - Input files merged successfully -@end example - - -@node Unzcrash -@chapter Testing the robustness of decompressors -@cindex unzcrash - -The lziprecover package also includes unzcrash, a program written to -test robustness to decompression of corrupted data, inspired by -unzcrash.c from Julian Seward's bzip2. Type @samp{make unzcrash} in the -lziprecover source directory to build it. - -Unzcrash reads the specified file and then repeatedly decompresses it, -increasing 256 times each byte of the compressed data, so as to test all -possible one-byte errors. This should not cause any invalid memory -accesses. If it does, please, report it as a bug. - -Unzcrash really executes as a subprocess the shell command specified in -the first non-option argument, and then writes the file specified in the -second non-option argument to the standard input of the subprocess, -modifying the corresponding byte each time. Therefore you can use -unzcrash to test any decompressor (not only lzip), or even other decoder -programs with a suitable command line syntax. - -The format for running unzcrash is: - -@example -unzcrash [@var{options}] "lzip -tv" @var{filename}.lz -@end example - -Unzcrash supports the following options: - -@table @samp -@item -h -@itemx --help -Print an informative help message describing the options and exit. - -@item -V -@itemx --version -Print the version number of unzcrash on the standard output and exit. - -@item -b @var{range} -@itemx --bits=@var{range} -Test N-bit errors only, instead of testing all the 255 wrong values for -each byte. @samp{N-bit error} means any value differing from the -original value in N bit positions, not a value differing from the -original value in the bit position N.@* -The number of N-bit errors per byte (N = 1 to 8) is: 8 28 56 70 56 28 8 1@* -Examples of @var{range}: 1 1,2,3 1-4 1,3-5,8 1-3,5-8 - -@item -p @var{bytes} -@itemx --position=@var{bytes} -First byte position to test in the file. Defaults to 0. - -@item -q -@itemx --quiet -Quiet operation. Suppress all messages. - -@item -s @var{bytes} -@itemx --size=@var{bytes} -Number of byte positions to test. If not specified, the whole file is -tested. - -@item -v -@itemx --verbose -Verbose mode. - -@end table - -Exit status: 0 for a normal exit, 1 for environmental problems (file not -found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or -invalid input file, 3 for an internal consistency error (eg, bug) which -caused unzcrash to panic. - - -@node Problems -@chapter Reporting bugs -@cindex bugs -@cindex getting help - -There are probably bugs in lziprecover. There are certainly errors and -omissions in this manual. If you report them, they will get fixed. If -you don't, no one will ever know about them and they will remain unfixed -for all eternity, if not longer. - -If you find a bug in lziprecover, please send electronic mail to -@email{lzip-bug@@nongnu.org}. Include the version number, which you can -find by running @w{@samp{lziprecover --version}}. - - -@node Concept index -@unnumbered Concept index - -@printindex cp - -@bye -- cgit v1.2.3