path: root/doc/lziprecover.info

This is lziprecover.info, produced by makeinfo version 4.13+ from
lziprecover.texi.

INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
* Lziprecover: (lziprecover).   Data recovery tool for lzip files
END-INFO-DIR-ENTRY


File: lziprecover.info,  Node: Top,  Next: Introduction,  Up: (dir)

Lziprecover Manual
******************

This manual is for Lziprecover (version 1.16-pre2, 25 May 2014).

* Menu:

* Introduction::           Purpose and features of lziprecover
* Invoking lziprecover::   Command line interface
* Repairing files::        Fixing bit-flip and similar errors
* Merging files::          Fixing several damaged copies
* File format::            Detailed format of the compressed file
* Examples::               A small tutorial with examples
* Unzcrash::               Testing the robustness of decompressors
* Problems::               Reporting bugs
* Concept index::          Index of concepts


   Copyright (C) 2009, 2010, 2011, 2012, 2013, 2014 Antonio Diaz Diaz.

   This manual is free documentation: you have unlimited permission to
copy, distribute and modify it.


File: lziprecover.info,  Node: Introduction,  Next: Invoking lziprecover,  Prev: Top,  Up: Top

1 Introduction
**************

Lziprecover is a data recovery tool and decompressor for files in the
lzip compressed data format (.lz), able to repair slightly damaged
files, recover badly damaged files from two or more copies, extract data
from damaged files, decompress files and test integrity of files.

   The lzip file format is designed for long-term data archiving, taking
into account both data integrity and decoder availability:

   * The lzip format provides very safe integrity checking and some data
     recovery means. The lziprecover program can repair bit-flip errors
     (one of the most common forms of data corruption) in lzip files,
     and provides data recovery capabilities, including error-checked
     merging of damaged copies of a file.

   * The lzip format is as simple as possible (but not simpler). The
     lzip manual provides the code of a simple decompressor along with
     a detailed explanation of how it works, so that with the only help
     of the lzip manual it would be possible for a digital
     archaeologist to extract the data from a lzip file long after
     quantum computers eventually render LZMA obsolete.

   * Additionally lzip is copylefted, which guarantees that it will
     remain free forever.

   Lziprecover is able to recover or decompress files produced by any of
the compressors in the lzip family; lzip, plzip, minilzip/lzlib, clzip
and pdlzip.

   If the cause of file corruption is damaged media, the combination
GNU ddrescue + lziprecover is the best option for recovering data from
multiple damaged copies. *Note ddrescue-example::, for an example.

   If a file is too damaged for lziprecover to repair it, all the
recoverable data in all members of the file can be extracted with the
following command (the resulting file may contain errors and some
garbage data may be produced at the end of each member):

     lziprecover -D0 -i -o file -q file.lz

   Lziprecover is able to efficiently extract a range of bytes from a
multi-member file, because it only decompresses the members containing
the desired data.

   Lziprecover can print correct total file sizes and ratios even for
multi-member files.

   When recovering data, lziprecover takes as arguments the names of the
damaged files and writes zero or more recovered files depending on the
operation selected and whether the recovery succeeded or not. The
damaged files themselves are never modified.

   When decompressing or testing file integrity, lziprecover behaves
like lzip or lunzip.

   Lziprecover is not a replacement for regular backups, but a last
line of defense for the case where the backups are also damaged.


File: lziprecover.info,  Node: Invoking lziprecover,  Next: Repairing files,  Prev: Introduction,  Up: Top

2 Invoking lziprecover
**********************

The format for running lziprecover is:

     lziprecover [OPTIONS] [FILES]

   Lziprecover supports the following options:

'-h'
'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of lziprecover on the standard output and
     exit.

'-c'
'--stdout'
     Decompress to standard output. Needed when reading from a named
     pipe (fifo) or from a device. Use it to recover as much of the
     uncompressed data as possible when decompressing a corrupt file.

'-d'
'--decompress'
     Decompress.

'-D RANGE'
'--range-decompress=RANGE'
     Decompress only a range of bytes starting at decompressed byte
     position 'BEGIN' and up to byte position 'END - 1'.  Three formats
     of RANGE are recognized, 'BEGIN', 'BEGIN-END', and 'BEGIN,SIZE'.
     If only BEGIN is specified, END is taken as the end of the file.
     The produced bytes are sent to standard output unless the
     '--output' option is used. In order to guarantee the correctness
     of the data produced, all members containing any part of the
     desired data are decompressed and their integrity is verified.
     This operation is more efficient in multi-member files because it
     only decompresses the members containing the desired data.

'-f'
'--force'
     Force overwrite of output files.

'-i'
'--ignore-errors'
     Make '--range-decompress' ignore data errors and continue
     decompressing the remaining members in the file. For example,
     'lziprecover -i -D0 file.lz > file' decompresses all the
     recoverable data in all members of 'file.lz' without having to
     split it first.

'-k'
'--keep'
     Keep (don't delete) input files during decompression.

'-l'
'--list'
     Print total file sizes and ratios. The values produced are correct
     even for multi-member files. Use it together with '-v' to see
     information about the members in the file.

'-m'
'--merge'
     Try to produce a correct file merging the good parts of two or more
     damaged copies. If successful, a repaired copy is written to the
     file 'FILE_fixed.lz'. The exit status is 0 if a correct file could
     be produced, 2 otherwise. See the chapter 'Merging files' (*note
     Merging files::) for a complete description of the merge mode.

'-o FILE'
'--output=FILE'
     Place the output into 'FILE' instead of into 'FILE_fixed.lz'. If
     splitting, the names of the files produced are in the form
     'rec01FILE', 'rec02FILE', etc. If decompressing from standard
     input and '--stdout' has not been specified, use 'FILE' as the
     name of the decompressed file.

'-q'
'--quiet'
     Quiet operation. Suppress all messages.

'-R'
'--repair'
     Try to repair a file with small errors (up to one byte error per
     member). If successful, a repaired copy is written to the file
     'FILE_fixed.lz'. 'FILE' is not modified at all.  The exit status
     is 0 if the file could be repaired, 2 otherwise. See the chapter
     'Repairing files' (*note Repairing files::) for a complete
     description of the repair mode.

'-s'
'--split'
     Search for members in 'FILE' and write each member in its own
     '.lz' file. You can then use 'lziprecover -t' to test the
     integrity of the resulting files, decompress those which are
     undamaged, and try to repair or partially decompress those which
     are damaged.

     The names of the files produced are in the form 'rec01FILE.lz',
     'rec02FILE.lz', etc, and are designed so that the use of wildcards
     in subsequent processing, for example,
     'lziprecover -cd rec*FILE.lz > recovered_data', processes the
     files in the correct order. The number of digits used in the names
     varies depending on the number of members in 'FILE'.

'-t'
'--test'
     Check integrity of the specified file(s), but don't decompress
     them.  This really performs a trial decompression and throws away
     the result.  Use it together with '-v' to see information about
     the file.

'-v'
'--verbose'
     Verbose mode.
     When decompressing or testing, further -v's (up to 4) increase the
     verbosity level, showing status, compression ratio, dictionary
     size, trailer contents (CRC, data size, member size), and up to 6
     bytes of trailing garbage (if any).


   Numbers given as arguments to options may be followed by a multiplier
and an optional 'B' for "byte".

   Table of SI and binary prefixes (unit multipliers):

Prefix   Value                     |   Prefix   Value
k        kilobyte  (10^3 = 1000)   |   Ki       kibibyte (2^10 = 1024)
M        megabyte  (10^6)          |   Mi       mebibyte (2^20)
G        gigabyte  (10^9)          |   Gi       gibibyte (2^30)
T        terabyte  (10^12)         |   Ti       tebibyte (2^40)
P        petabyte  (10^15)         |   Pi       pebibyte (2^50)
E        exabyte   (10^18)         |   Ei       exbibyte (2^60)
Z        zettabyte (10^21)         |   Zi       zebibyte (2^70)
Y        yottabyte (10^24)         |   Yi       yobibyte (2^80)


   Exit status: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
invalid input file, 3 for an internal consistency error (eg, bug) which
caused lziprecover to panic.


File: lziprecover.info,  Node: Repairing files,  Next: Merging files,  Prev: Invoking lziprecover,  Up: Top

3 Repairing files
*****************

Lziprecover is usually able to repair files with small errors (up to one
byte error per member). The error may be located anywhere in the file
except in the header (first 6 bytes of each member) or in the 'Member
size' field of the trailer (last 8 bytes of each member).  This makes
lzip files resistant to bit-flip, one of the most common forms of data
corruption.

   Bit-flip happens when one bit in the file is changed from 0 to 1 or
vice versa. It may be caused by bad RAM or even by natural radiation. I
have seen a case of bit-flip in a file stored in an USB flash drive.

   Repairing a file can take some time. Small files or files with the
error located near the beginning can be repaired in a few seconds. But
repairing a large file compressed with a large dictionary size and with
the error located far from the beginning, can take hours.

   On the other hand, errors located near the beginning of the file
cause much more loss of data than errors located near the end. So
lziprecover repairs more efficiently the worst errors.


File: lziprecover.info,  Node: Merging files,  Next: File format,  Prev: Repairing files,  Up: Top

4 Merging files
***************

If you have several copies of a file but all of them are too damaged to
repair them (*note Repairing files::), lziprecover can try to produce a
correct file merging the good parts of the damaged copies.

   The merge may succeed even if some copies of the file have all the
headers and trailers damaged, as long as there is at least one copy of
every header and trailer intact, even if they are in different copies of
the file.

   The merge will fail if the damaged areas overlap (at least one byte
is damaged in all copies), or are adjacent and the boundary can't be
determined, or if the copies have too many damaged areas.

   All the copies must have the same size. If some of them have been
truncated and are therefore smaller than they should, you can extend
them to the correct size with the following command before merging them
with the other copies:

     ddrescue --extend-outfile=<correct_size> small_file.lz extended_file.lz

   If some of the copies have got garbage data at the end and are
therefore larger than they should, you can reduce their sizes to the
correct value with the following command before merging them with the
other copies:

     ddrescue --size=<correct_size> large_file.lz reduced_file.lz

   To give you an idea of its possibilities, when merging two copies,
each of them with one damaged area affecting 1 percent of the copy, the
probability of obtaining a correct file is about 98 percent. With three
such copies the probability rises to 99.97 percent. For large files (a
few MB) with small errors (one sector damaged per copy), the probability
approaches 100 percent even with only two copies.


File: lziprecover.info,  Node: File format,  Next: Examples,  Prev: Merging files,  Up: Top

5 File format
*************

Perfection is reached, not when there is no longer anything to add, but
when there is no longer anything to take away.
-- Antoine de Saint-Exupery


   In the diagram below, a box like this:
+---+
|   | <-- the vertical bars might be missing
+---+

   represents one byte; a box like this:
+==============+
|              |
+==============+

   represents a variable number of bytes.


   A lzip file consists of a series of "members" (compressed data sets).
The members simply appear one after another in the file, with no
additional information before, between, or after them.

   Each member has the following structure:
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ID string | VN | DS | Lzma stream | CRC32 |   Data size   |  Member size  |
+--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   All multibyte values are stored in little endian order.

'ID string'
     A four byte string, identifying the lzip format, with the value
     "LZIP" (0x4C, 0x5A, 0x49, 0x50).

'VN (version number, 1 byte)'
     Just in case something needs to be modified in the future. 1 for
     now.

'DS (coded dictionary size, 1 byte)'
     Lzip divides the distance between any two powers of 2 into 8
     equally spaced intervals, named "wedges". The dictionary size is
     calculated by taking a power of 2 (the base size) and substracting
     from it a number of wedges between 0 and 7. The size of a wedge is
     (base_size / 16).
     Bits 4-0 contain the base 2 logarithm of the base size (12 to 29).
     Bits 7-5 contain the number of wedges (0 to 7) to substract from
     the base size to obtain the dictionary size.
     Example: 0xD3 = 2^19 - 6 * 2^15 = 512 KiB - 6 * 32 KiB = 320 KiB
     Valid values for dictionary size range from 4 KiB to 512 MiB.

'Lzma stream'
     The lzma stream, finished by an end of stream marker. Uses default
     values for encoder properties. See the lzip manual for a full
     description.

'CRC32 (4 bytes)'
     CRC of the uncompressed original data.

'Data size (8 bytes)'
     Size of the uncompressed original data.

'Member size (8 bytes)'
     Total size of the member, including header and trailer. This field
     acts as a distributed index, allows the verification of stream
     integrity, and facilitates safe recovery of undamaged members from
     multi-member files.



File: lziprecover.info,  Node: Examples,  Next: Unzcrash,  Prev: File format,  Up: Top

6 A small tutorial with examples
********************************

Example 1: Restore a regular file from its compressed version
'file.lz'. If the operation is successful, 'file.lz' is removed.

     lziprecover -d file.lz


Example 2: Verify the integrity of the compressed file 'file.lz' and
show status.

     lziprecover -tv file.lz


Example 3: Decompress 'file.lz' partially until 10 KiB of decompressed
data are produced.

     lziprecover -D 0,10KiB file.lz


Example 4: Decompress 'file.lz' partially from decompressed byte 10000
to decompressed byte 15000 (5000 bytes are produced).

     lziprecover -D 10000-15000 file.lz


Example 5: Repair small errors in the file 'file.lz'. (Indented lines
are abridged diagnostic messages from lziprecover).

     lziprecover -v -R file.lz
       Copy of input file repaired successfully.
     mv file_fixed.lz file.lz


Example 6: Split the multi-member file 'file.lz' and write each member
in its own 'recXXXfile.lz' file. Then use 'lziprecover -t' to test the
integrity of the resulting files.

     lziprecover -s file.lz
     lziprecover -tv rec*file.lz


Example 7: Recover a compressed backup from two copies on CD-ROM with
error-checked merging of copies (*Note GNU ddrescue manual:
(ddrescue)Top, for details about ddrescue).

     ddrescue -b2048 /dev/cdrom cdimage1 logfile1
     mount -t iso9660 -o loop,ro cdimage1 /mnt/cdimage
     cp /mnt/cdimage/backup.tar.lz rescued1.tar.lz
     umount /mnt/cdimage
       (insert second copy in the CD drive)
     ddrescue -b2048 /dev/cdrom cdimage2 logfile2
     mount -t iso9660 -o loop,ro cdimage2 /mnt/cdimage
     cp /mnt/cdimage/backup.tar.lz rescued2.tar.lz
     umount /mnt/cdimage
     lziprecover -m -v -o backup.tar.lz rescued1.tar.lz rescued2.tar.lz


Example 8: Recover the first volume of those created with the command
'lzip -b 32MiB -S 650MB big_db' from two copies, 'big_db1_00001.lz' and
'big_db2_00001.lz', with member 07 damaged in the first copy, member 18
damaged in the second copy, and member 12 damaged in both copies. The
correct file produced is saved in 'big_db_00001.lz'.

     lziprecover -m -v -o big_db_00001.lz big_db1_00001.lz big_db2_00001.lz
       Input files merged successfully


File: lziprecover.info,  Node: Unzcrash,  Next: Problems,  Prev: Examples,  Up: Top

7 Testing the robustness of decompressors
*****************************************

The lziprecover package also includes unzcrash, a program written to
test robustness to decompression of corrupted data, inspired by
unzcrash.c from Julian Seward's bzip2. Type 'make unzcrash' in the
lziprecover source directory to build it.

   Unzcrash reads the specified file and then repeatedly decompresses
it, increasing 256 times each byte of the compressed data, so as to
test all possible one-byte errors. This should not cause any invalid
memory accesses. If it does, please, report it as a bug.

   Unzcrash really executes as a subprocess the shell command specified
in the first non-option argument, and then writes the file specified in
the second non-option argument to the standard input of the subprocess,
modifying the corresponding byte each time. Therefore you can use
unzcrash to test any decompressor (not only lzip), or even other decoder
programs with a suitable command line syntax.

   The format for running unzcrash is:

     unzcrash [OPTIONS] "lzip -tv" FILENAME.lz

   Unzcrash supports the following options:

'-h'
'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of unzcrash on the standard output and
     exit.

'-b RANGE'
'--bits=RANGE'
     Test N-bit errors only, instead of testing all the 255 wrong
     values for each byte. 'N-bit error' means any value differing from
     the original value in N bit positions, not a value differing from
     the original value in the bit position N.
     The number of N-bit errors per byte (N = 1 to 8) is: 8 28 56 70 56
     28 8 1
     Examples of RANGE:  1  1,2,3  1-4  1,3-5,8  1-3,5-8

'-p BYTES'
'--position=BYTES'
     First byte position to test in the file. Defaults to 0.

'-q'
'--quiet'
     Quiet operation. Suppress all messages.

'-s BYTES'
'--size=BYTES'
     Number of byte positions to test. If not specified, the whole file
     is tested.

'-v'
'--verbose'
     Verbose mode.


   Exit status: 0 for a normal exit, 1 for environmental problems (file
not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
invalid input file, 3 for an internal consistency error (eg, bug) which
caused unzcrash to panic.


File: lziprecover.info,  Node: Problems,  Next: Concept index,  Prev: Unzcrash,  Up: Top

8 Reporting bugs
****************

There are probably bugs in lziprecover. There are certainly errors and
omissions in this manual. If you report them, they will get fixed. If
you don't, no one will ever know about them and they will remain unfixed
for all eternity, if not longer.

   If you find a bug in lziprecover, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find
by running 'lziprecover --version'.


File: lziprecover.info,  Node: Concept index,  Prev: Problems,  Up: Top

Concept index
*************

[index]
* Menu:

* bugs:                                  Problems.              (line 6)
* examples:                              Examples.              (line 6)
* file format:                           File format.           (line 6)
* getting help:                          Problems.              (line 6)
* introduction:                          Introduction.          (line 6)
* invoking:                              Invoking lziprecover.  (line 6)
* merging files:                         Merging files.         (line 6)
* repairing files:                       Repairing files.       (line 6)
* unzcrash:                              Unzcrash.              (line 6)



Tag Table:
Node: Top226
Node: Introduction1099
Node: Invoking lziprecover3857
Node: Repairing files9295
Node: Merging files10485
Node: File format12256
Node: Examples14766
Ref: ddrescue-example15967
Node: Unzcrash17076
Node: Problems19448
Node: Concept index19998

End Tag Table


Local Variables:
coding: iso-8859-15
End: