This is lzlib.info, produced by makeinfo version 4.13 from lzlib.texinfo. INFO-DIR-SECTION Data Compression START-INFO-DIR-ENTRY * Lzlib: (lzlib). A compression library for lzip files END-INFO-DIR-ENTRY  File: lzlib.info, Node: Top, Next: Introduction, Up: (dir) Lzlib ***** This manual is for Lzlib (version 0.6, 2 September 2009). * Menu: * Introduction:: Purpose and features of Lzlib * Library Version:: Checking library version * Buffering:: Sizes of Lzlib's buffers * Compression Functions:: Descriptions of the compression functions * Decompression Functions:: Descriptions of the decompression functions * Error Codes:: Meaning of codes returned by functions * Data Format:: Detailed format of the compressed data * Examples:: A small tutorial with examples * Problems:: Reporting bugs * Concept Index:: Index of concepts Copyright (C) 2009 Antonio Diaz Diaz. This manual is free documentation: you have unlimited permission to copy, distribute and modify it.  File: lzlib.info, Node: Introduction, Next: Library Version, Prev: Top, Up: Top 1 Introduction ************** Lzlib is a data compression library providing in-memory LZMA compression and decompression functions, including integrity checking of the uncompressed data. The compressed data format used by the library is the lzip format. The functions and variables forming the interface of the compression library are declared in the file `lzlib.h'. An usage example of the library is given in the file main.cc. Compression/decompression is done by repeteadly calling a couple of read/write functions until all the data has been processed by the library. This interface is safer and less error prone than the traditional zlib interface. Compression/decompression is done when the read function is called. This means the value returned by the position functions will not be updated until some data is read, even if you write a lot of data. If you want the data to be compressed in advance, just call the read function with a SIZE equal to 0. Lzlib will correctly decompress a data stream which is the concatenation of two or more compressed data streams. The result is the concatenation of the corresponding uncompressed data streams. Integrity testing of concatenated compressed data streams is also supported. All the library functions are thread safe. The library does not install any signal handler. The decoder checks the consistency of the compressed data, so the library should never crash even in case of corrupted input. Lzlib implements a simplified version of the LZMA (Lempel-Ziv-Markov chain-Algorithm) algorithm. The original LZMA algorithm was designed by Igor Pavlov. For a description of the LZMA algorithm, see the Lzip manual.  File: lzlib.info, Node: Library Version, Next: Buffering, Prev: Introduction, Up: Top 2 Library Version ***************** -- Function: const char * LZ_version ( void ) Returns the library version as a string. -- Constant: const char * LZ_version_string This constant is defined in the header file `lzlib.h'. The application should compare LZ_version and LZ_version_string for consistency. If the first character differs, the library code actually used may be incompatible with the `lzlib.h' header file used by the application. if( LZ_version()[0] != LZ_version_string[0] ) error( "bad library version" );  File: lzlib.info, Node: Buffering, Next: Compression Functions, Prev: Library Version, Up: Top 3 Buffering *********** Lzlib internal functions need access to a memory chunk at least as large as the dictionary size (sliding window). For efficiency reasons, the input buffer for compression is twice as large as the dictionary size. Finally, for security reasons, lzlib uses two more internal buffers. These are the four buffers used by lzlib, and their guaranteed minimum sizes: * Input compression buffer. Written to by the `LZ_compress_write' function. Its size is two times the dictionary size set with the `LZ_compress_open' function or 128KiB, whichever is larger. * Output compression buffer. Read from by the `LZ_compress_read' function. Its size is 64KiB. * Input decompression buffer. Written to by the `LZ_decompress_write' function. Its size is 64KiB. * Output decompression buffer. Read from by the `LZ_decompress_read' function. Its size is the dictionary size set with the `LZ_decompress_open' function or 64KiB, whichever is larger.  File: lzlib.info, Node: Compression Functions, Next: Decompression Functions, Prev: Buffering, Up: Top 4 Compression Functions *********************** These are the functions used to compress data. In case of error, all of them return -1, except `LZ_compress_open' whose return value must be verified by calling `LZ_compress_errno' before using it. -- Function: void * LZ_compress_open ( const int DICTIONARY_SIZE, const int MATCH_LEN_LIMIT, const long long MEMBER_SIZE ) Initializes the internal stream state for compression and returns a pointer that can only be used as the ENCODER argument for the other LZ_compress functions. The returned pointer must be verified by calling `LZ_compress_errno' before using it. If `LZ_compress_errno' does not return `LZ_ok', the returned pointer must not be used and should be freed with `LZ_compress_close' to avoid memory leaks. DICTIONARY_SIZE sets the dictionary size to be used, in bytes. Valid values range from 4KiB to 512MiB. Note that dictionary sizes are quantized. If the specified size does not match one of the valid sizes, it will be rounded upwards. MATCH_LEN_LIMIT sets the match length limit in bytes. Valid values range from 5 to 273. Larger values usually give better compression ratios but longer compression times. MEMBER_SIZE sets the member size limit in bytes. Minimum member size limit is 100kB. Small member size may degrade compression ratio, so use it only when needed. To produce a single member data stream, give MEMBER_SIZE a value larger than the amount of data to be produced, for example LLONG_MAX. -- Function: int LZ_compress_restart_member ( void * const ENCODER, const long long MEMBER_SIZE ) Use this function to start a new member, in a multimember data stream. Call this function only after `LZ_compress_member_finished' indicates that the current member has been fully read (with the `LZ_compress_read' function). -- Function: int LZ_compress_close ( void * const ENCODER ) Frees all dynamically allocated data structures for this stream. This function discards any unprocessed input and does not flush any pending output. After a call to `LZ_compress_close', ENCODER can no more be used as an argument to any LZ_compress function. -- Function: int LZ_compress_finish ( void * const ENCODER ) Use this function to tell `lzlib' that all the data for this stream has already been written (with the `LZ_compress_write' function). -- Function: int LZ_compress_sync_flush ( void * const ENCODER ) Use this function to make available to `LZ_compress_read' all the data already written with the `LZ_compress_write' function. Repeated use of `LZ_compress_sync_flush' may degrade compression ratio, so use it only when needed. -- Function: int LZ_compress_read ( void * const ENCODER, uint8_t * const BUFFER, const int SIZE ) The `LZ_compress_read' function reads up to SIZE bytes from the stream pointed to by ENCODER, storing the results in BUFFER. The return value is the number of bytes actually read. This might be less than SIZE; for example, if there aren't that many bytes left in the stream or if more bytes have to be yet written with the `LZ_compress_write' function. Note that reading less than SIZE bytes is not an error. -- Function: int LZ_compress_write ( void * const ENCODER, uint8_t * const BUFFER, const int SIZE ) The `LZ_compress_write' function writes up to SIZE bytes from BUFFER to the stream pointed to by ENCODER. The return value is the number of bytes actually written. This might be less than SIZE. Note that writing less than SIZE bytes is not an error. -- Function: int LZ_compress_write_size ( void * const ENCODER ) The `LZ_compress_write_size' function returns the maximum number of bytes that can be inmediately written through the `LZ_compress_write' function. It is guaranteed that an inmediate call to `LZ_compress_write' will accept a SIZE up to the returned number of bytes. -- Function: enum LZ_errno LZ_compress_errno ( void * const ENCODER ) Returns the current error code for ENCODER (*note Error Codes::) -- Function: int LZ_compress_finished ( void * const ENCODER ) Returns 1 if all the data has been read and `LZ_compress_close' can be safely called. Otherwise it returns 0. -- Function: int LZ_compress_member_finished ( void * const ENCODER ) Returns 1 if the current member, in a multimember data stream, has been fully read and `LZ_compress_restart_member' can be safely called. Otherwise it returns 0. -- Function: long long LZ_compress_data_position ( void * const ENCODER ) Returns the number of input bytes already compressed in the current member. -- Function: long long LZ_compress_member_position ( void * const ENCODER ) Returns the number of compressed bytes already produced, but perhaps not yet read, in the current member. -- Function: long long LZ_compress_total_in_size ( void * const ENCODER ) Returns the total number of input bytes already compressed. -- Function: long long LZ_compress_total_out_size ( void * const ENCODER ) Returns the total number of compressed bytes already produced, but perhaps not yet read.  File: lzlib.info, Node: Decompression Functions, Next: Error Codes, Prev: Compression Functions, Up: Top 5 Decompression Functions ************************* These are the functions used to decompress data. In case of error, all of them return -1, except `LZ_decompress_open' whose return value must be verified by calling `LZ_decompress_errno' before using it. -- Function: void * LZ_decompress_open ( void ) Initializes the internal stream state for decompression and returns a pointer that can only be used as the DECODER argument for the other LZ_decompress functions. The returned pointer must be verified by calling `LZ_decompress_errno' before using it. If `LZ_decompress_errno' does not return `LZ_ok', the returned pointer must not be used and should be freed with `LZ_decompress_close' to avoid memory leaks. -- Function: int LZ_decompress_close ( void * const DECODER ) Frees all dynamically allocated data structures for this stream. This function discards any unprocessed input and does not flush any pending output. After a call to `LZ_decompress_close', DECODER can no more be used as an argument to any LZ_decompress function. -- Function: int LZ_decompress_finish ( void * const DECODER ) Use this function to tell `lzlib' that all the data for this stream has already been written (with the `LZ_decompress_write' function). -- Function: int LZ_decompress_read ( void * const DECODER, uint8_t * const BUFFER, const int SIZE ) The `LZ_decompress_read' function reads up to SIZE bytes from the stream pointed to by DECODER, storing the results in BUFFER. The return value is the number of bytes actually read. This might be less than SIZE; for example, if there aren't that many bytes left in the stream or if more bytes have to be yet written with the `LZ_decompress_write' function. Note that reading less than SIZE bytes is not an error. -- Function: int LZ_decompress_write ( void * const DECODER, uint8_t * const BUFFER, const int SIZE ) The `LZ_decompress_write' function writes up to SIZE bytes from BUFFER to the stream pointed to by DECODER. The return value is the number of bytes actually written. This might be less than SIZE. Note that writing less than SIZE bytes is not an error. -- Function: enum LZ_errno LZ_decompress_errno ( void * const DECODER ) Returns the current error code for DECODER (*note Error Codes::) -- Function: int LZ_decompress_finished ( void * const DECODER ) Returns 1 if all the data has been read and `LZ_decompress_close' can be safely called. Otherwise it returns 0. -- Function: long long LZ_decompress_data_position ( void * const DECODER ) Returns the number of decompressed bytes already produced, but perhaps not yet read, in the current member. -- Function: long long LZ_decompress_member_position ( void * const DECODER ) Returns the number of input bytes already decompressed in the current member. -- Function: long long LZ_decompress_total_in_size ( void * const DECODER ) Returns the total number of input bytes already decompressed. -- Function: long long LZ_decompress_total_out_size ( void * const DECODER ) Returns the total number of decompressed bytes already produced, but perhaps not yet read.  File: lzlib.info, Node: Error Codes, Next: Data Format, Prev: Decompression Functions, Up: Top 6 Error Codes ************* Most library functions return -1 to indicate that they have failed. But this return value only tells you that an error has occurred. To find out what kind of error it was, you need to verify the error code by calling `LZ_(de)compress_errno'. Library functions do not change the value returned by `LZ_(de)compress_errno' when they succeed; thus, the value returned by `LZ_(de)compress_errno' after a successful call is not necessarily LZ_ok, and you should not use `LZ_(de)compress_errno' to determine whether a call failed. If the call failed, then you can examine `LZ_(de)compress_errno'. The error codes are defined in the header file `lzlib.h'. -- Constant: enum LZ_errno LZ_ok The value of this constant is 0 and is used to indicate that there is no error. -- Constant: enum LZ_errno LZ_bad_argument At least one of the arguments passed to the library function was invalid. -- Constant: enum LZ_errno LZ_mem_error No memory available. The system cannot allocate more virtual memory because its capacity is full. -- Constant: enum LZ_errno LZ_sequence_error A library function was called in the wrong order. For example `LZ_compress_restart_member' was called before `LZ_compress_member_finished' indicates that the current member is finished. -- Constant: enum LZ_errno LZ_header_error Reading of member header failed. If this happens at the end of the data stream it may indicate trailing garbage. -- Constant: enum LZ_errno LZ_unexpected_eof The end of the data stream was reached in the middle of a member. -- Constant: enum LZ_errno LZ_data_error The data stream is corrupt. -- Constant: enum LZ_errno LZ_library_error A bug was detected in the library. Please, report it (*note Problems::).  File: lzlib.info, Node: Data Format, Next: Examples, Prev: Error Codes, Up: Top 7 Data Format ************* In the diagram below, a box like this: +---+ | | <-- the vertical bars might be missing +---+ represents one byte; a box like this: +==============+ | | +==============+ represents a variable number of bytes. A lzip data stream consists of a series of "members" (compressed data sets). The members simply appear one after another in the data stream, with no additional information before, between, or after them. Each member has the following structure: +--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ID string | VN | DS | Lzma stream | CRC32 | Data size | Member size | +--+--+--+--+----+----+=============+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ All multibyte values are stored in little endian order. `ID string' A four byte string, identifying the member type, with the value "LZIP". `VN (version number, 1 byte)' Just in case something needs to be modified in the future. Valid values are 0 and 1. Version 0 files have only one member and lack `Member size'. `DS (coded dictionary size, 1 byte)' Bits 4-0 contain the base 2 logarithm of the base dictionary size. Bits 7-5 contain the number of "wedges" to substract from the base dictionary size to obtain the dictionary size. The size of a wedge is (base dictionary size / 16). Valid values for dictionary size range from 4KiB to 512MiB. `Lzma stream' The lzma stream, finished by an end of stream marker. Uses default values for encoder properties. `CRC32 (4 bytes)' CRC of the uncompressed original data. `Data size (8 bytes)' Size of the uncompressed original data. `Member size (8 bytes)' Total size of the member, including header and trailer. This facilitates safe recovery of undamaged members from multimember files.  File: lzlib.info, Node: Examples, Next: Problems, Prev: Data Format, Up: Top 8 A small tutorial with examples ******************************** This chaper shows the order in which the library functions should be called depending on what kind of data stream you want to compress or decompress. Example 1: Normal compression (MEMBER_SIZE > total output). 1) LZ_compress_open 2) LZ_compress_write 3) LZ_compress_read 4) go back to step 2 until all input data has been written 5) LZ_compress_finish 6) LZ_compress_read 7) go back to step 6 until LZ_compress_finished returns 1 8) LZ_compress_close Example 2: Decompression. 1) LZ_decompress_open 2) LZ_decompress_write 3) LZ_decompress_read 4) go back to step 2 until all input data has been written 5) LZ_decompress_finish 6) LZ_decompress_read 7) go back to step 6 until LZ_decompress_finished returns 1 8) LZ_decompress_close Example 3: Multimember compression (MEMBER_SIZE < total output). 1) LZ_compress_open 2) LZ_compress_write 3) LZ_compress_read 4) go back to step 2 until LZ_compress_member_finished returns 1 5) LZ_compress_restart_member 6) go back to step 2 until all input data has been written 7) LZ_compress_finish 8) LZ_compress_read 9) go back to step 8 until LZ_compress_finished returns 1 10) LZ_compress_close  File: lzlib.info, Node: Problems, Next: Concept Index, Prev: Examples, Up: Top 9 Reporting Bugs **************** There are probably bugs in Lzlib. There are certainly errors and omissions in this manual. If you report them, they will get fixed. If you don't, no one will ever know about them and they will remain unfixed for all eternity, if not longer. If you find a bug in Lzlib, please send electronic mail to . Include the version number, which you can find by running `minilzip --version' or in `LZ_version_string' from `lzlib.h'.  File: lzlib.info, Node: Concept Index, Prev: Problems, Up: Top Concept Index ************* [index] * Menu: * buffering: Buffering. (line 6) * bugs: Problems. (line 6) * compression functions: Compression Functions. (line 6) * data format: Data Format. (line 6) * decompression functions: Decompression Functions. (line 6) * error codes: Error Codes. (line 6) * examples: Examples. (line 6) * getting help: Problems. (line 6) * introduction: Introduction. (line 6) * library version: Library Version. (line 6)  Tag Table: Node: Top219 Node: Introduction1015 Node: Library Version2790 Node: Buffering3435 Node: Compression Functions4542 Node: Decompression Functions10044 Node: Error Codes13482 Node: Data Format15418 Node: Examples17385 Node: Problems18819 Node: Concept Index19389  End Tag Table