diff options
Diffstat (limited to '')
133 files changed, 6608 insertions, 0 deletions
@@ -0,0 +1,283 @@ +#!/bin/bash +# +# run test suite for mdadm +mdadm=$PWD/mdadm +targetdir="/var/tmp" +logdir="$targetdir" +config=/tmp/mdadm.conf +testdir=$PWD/tests +devlist= + +savelogs=0 +exitonerror=1 +prefix='[0-9][0-9]' + +# use loop devices by default if doesn't specify --dev +DEVTYPE=loop +INTEGRITY=yes +LVM_VOLGROUP=mdtest + +# make sure to test local mdmon, not system one +export MDADM_NO_SYSTEMCTL=1 + +# assume md0, md1, md2 exist in /dev +md0=/dev/md0 +md1=/dev/md1 +md2=/dev/md2 +mdp0=/dev/md_d0 +mdp1=/dev/md_d1 + +die() { + echo -e "\n\tERROR: $* \n" + save_log fail + exit 2 +} + +ctrl_c() { + exitonerror=1 +} + +# mdadm always adds --quiet, and we want to see any unexpected messages +mdadm() { + rm -f $targetdir/stderr + case $* in + *-S* ) + udevadm settle + p=`cat /proc/sys/dev/raid/speed_limit_max` + echo 20000 > /proc/sys/dev/raid/speed_limit_max + ;; + esac + case $* in + *-C* | *--create* | *-B* | *--build* ) + # clear superblock every time once creating or + # building arrays, because it's always creating + # and building array many times in a test case. + for args in $* + do + [[ $args =~ "/dev/" ]] && { + [[ $args =~ "md" ]] || + $mdadm --zero $args > /dev/null + } + done + $mdadm 2> $targetdir/stderr --quiet "$@" --auto=yes + ;; + * ) + $mdadm 2> $targetdir/stderr --quiet "$@" + ;; + esac + rv=$? + case $* in + *-S* ) + udevadm settle + echo $p > /proc/sys/dev/raid/speed_limit_max + ;; + esac + cat >&2 $targetdir/stderr + return $rv +} + +do_test() { + _script=$1 + _basename=`basename $_script` + if [ -f "$_script" ] + then + rm -f $targetdir/stderr + # this might have been reset: restore the default. + echo 2000 > /proc/sys/dev/raid/speed_limit_max + do_clean + # source script in a subshell, so it has access to our + # namespace, but cannot change it. + echo -ne "$_script... " + if ( set -ex ; . $_script ) &> $targetdir/log + then + dmesg | grep -iq "error\|call trace\|segfault" && + die "dmesg prints errors when testing $_basename!" + echo "succeeded" + _fail=0 + else + save_log fail + _fail=1 + fi + [ "$savelogs" == "1" ] && + mv -f $targetdir/log $logdir/$_basename.log + [ "$_fail" == "1" -a "$exitonerror" == "1" ] && exit 1 + fi +} + +do_help() { + cat <<-EOF + Usage: $0 [options] + Example for disk mode: ./test --dev=disk --disks=/dev/sda{2..15} + Options: + --tests=test1,test2,... Comma separated list of tests to run + --testdir= Specify testdir as tests|clustermd_tests + --raidtype= raid0|linear|raid1|raid456|raid10|ddf|imsm + --disable-multipath Disable any tests involving multipath + --disable-integrity Disable slow tests of RAID[56] consistency + --logdir=directory Directory to save all logfiles in + --save-logs Usually use with --logdir together + --keep-going | --no-error Don't stop on error, ie. run all tests + --dev=loop|lvm|ram|disk Use loop devices (default), LVM, RAM or disk + --disks= Provide a bunch of physical devices for test + --volgroup=name LVM volume group for LVM test + setup Setup test environment and exit + cleanup Cleanup test environment + prefix Run tests with <prefix> + --help | -h Print this usage + EOF +} + +parse_args() { + for i in $* + do + case $i in + --testdir=* ) + case ${i##*=} in + tests ) + testdir=tests + ;; + clustermd_tests ) + testdir=clustermd_tests + CLUSTER_CONF="$PWD/$testdir/cluster_conf" + ;; + * ) + echo "Unknown argument: $i" + do_help + exit 1 + ;; + esac + ;; + esac + done + [ -z "$testdir" ] && testdir=tests + . $testdir/func.sh + for i in $* + do + case $i in + [0-9][0-9] ) + prefix=$i + ;; + setup ) + echo "mdadm test environment setup" + do_setup + trap 0 + exit 0 + ;; + cleanup ) + cleanup + exit 0 + ;; + --testdir=* ) + ;; + --tests=* ) + TESTLIST=($(echo ${i##*=} | sed -e 's/,/ /g')) + ;; + --raidtype=* ) + case ${i##*=} in + raid0 ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]r0\|raid0")) + ;; + linear ) + TESTLIST=($(ls $testdir | grep "linear")) + ;; + raid1 ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]r1\|raid1" | grep -vi "r10\|raid10")) + ;; + raid456 ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]r[4-6]\|raid[4-6]")) + ;; + raid10 ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]r10\|raid10")) + ;; + ddf ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]ddf")) + ;; + imsm ) + TESTLIST=($(ls $testdir | grep "[0-9][0-9]imsm")) + ;; + * ) + echo "Unknown argument: $i" + do_help + exit 1 + ;; + esac + ;; + --logdir=* ) + logdir="${i##*=}" + ;; + --save-logs ) + savelogs=1 + ;; + --keep-going | --no-error ) + exitonerror=0 + ;; + --disable-multipath ) + unset MULTIPATH + ;; + --disable-integrity ) + unset INTEGRITY + ;; + --dev=* ) + case ${i##*=} in + loop ) + DEVTYPE=loop + ;; + lvm ) + DEVTYPE=lvm + ;; + ram ) + DEVTYPE=ram + ;; + disk ) + DEVTYPE=disk + ;; + * ) + echo "Unknown argument: $i" + do_help + exit 1 + ;; + esac + ;; + --disks=* ) + disks=(${disks[*]} ${i##*=}) + ;; + --volgroup=* ) + LVM_VOLGROUP=`expr "x$i" : 'x[^=]*=\(.*\)'` + ;; + --help | -h ) + do_help + exit 0 + ;; + * ) + echo " $0: Unknown argument: $i" + do_help + exit 1 + ;; + esac + done +} + +main() { + do_setup + + echo "Testing on linux-$(uname -r) kernel" + [ "$savelogs" == "1" ] && + echo "Saving logs to $logdir" + if [ "x$TESTLIST" != "x" ] + then + for script in ${TESTLIST[@]} + do + do_test $testdir/$script + done + else + for script in $testdir/$prefix $testdir/$prefix*[^~] + do + do_test $script + done + fi + + exit 0 +} + +parse_args $@ +main diff --git a/tests/00linear b/tests/00linear new file mode 100644 index 0000000..e3ac655 --- /dev/null +++ b/tests/00linear @@ -0,0 +1,25 @@ + +# create a simple linear + +mdadm -CR $md0 -l linear -n3 $dev0 $dev1 $dev2 +check linear +testdev $md0 3 $mdsize2_l 1 +mdadm -S $md0 + +# now with version-0.90 superblock +mdadm -CR $md0 -e0.90 --level=linear -n4 $dev0 $dev1 $dev2 $dev3 +check linear +testdev $md0 4 $mdsize0 1 +mdadm -S $md0 + +# now with version-1.0 superblock +mdadm -CR $md0 -e1.0 --level=linear -n4 $dev0 $dev1 $dev2 $dev3 +check linear +testdev $md0 4 $mdsize1 1 +mdadm -S $md0 + +# now with no superblock +mdadm -B $md0 -l linear -n5 $dev0 $dev1 $dev2 $dev3 $dev4 +check linear +testdev $md0 5 $size 64 +mdadm -S $md0 diff --git a/tests/00multipath b/tests/00multipath new file mode 100644 index 0000000..84e4d69 --- /dev/null +++ b/tests/00multipath @@ -0,0 +1,29 @@ + +# +# create a multipath, and fail and stuff + +if [ "$MULTIPATH" != "yes" ]; then + echo -ne 'skipping... ' + exit 0 +fi + +mdadm -CR $md1 -l multipath -n2 $path0 $path1 + +testdev $md1 1 $mdsize12 1 + +mdadm $md1 -f $path0 +rotest $md1 +testdev $md1 1 $mdsize12 1 + +mdadm $md1 -r $path0 +mdadm $md1 -a $path0 + +rotest $md1 +testdev $md1 1 $mdsize12 1 + +mdadm $md1 -f $path1 +mdadm $md1 -r $path1 +rotest $md1 +testdev $md1 1 $mdsize12 1 + +mdadm -S $md1 diff --git a/tests/00names b/tests/00names new file mode 100644 index 0000000..7a066d8 --- /dev/null +++ b/tests/00names @@ -0,0 +1,13 @@ +set -x -e + +# create arrays with non-numeric names +conf=$targetdir/mdadm.conf +echo "CREATE names=yes" > $conf + +for i in linear raid0 raid1 raid4 raid5 raid6 +do + mdadm -CR --config $conf /dev/md/$i -l $i -n 4 $dev4 $dev3 $dev2 $dev1 + check $i + [ -d /sys/class/block/md_$i/md ] + mdadm -S md_$i +done diff --git a/tests/00raid0 b/tests/00raid0 new file mode 100644 index 0000000..8bc1898 --- /dev/null +++ b/tests/00raid0 @@ -0,0 +1,43 @@ + +# create a simple raid0 + +mdadm -CR $md0 -l raid0 -n3 $dev0 $dev1 $dev2 +check raid0 +testdev $md0 3 $mdsize2_l 512 +mdadm -S $md0 + +# now with version-0.90 superblock +mdadm -CR $md0 -e0.90 -l0 -n4 $dev0 $dev1 $dev2 $dev3 +check raid0 +testdev $md0 4 $mdsize0 512 +mdadm -S $md0 + +# now with no superblock +mdadm -B $md0 -l0 -n5 $dev0 $dev1 $dev2 $dev3 $dev4 +check raid0 +testdev $md0 5 $size 512 +mdadm -S $md0 + + +# now same again with different chunk size +for chunk in 4 32 256 +do + mdadm -CR $md0 -e0.90 -l raid0 --chunk $chunk -n3 $dev0 $dev1 $dev2 + check raid0 + testdev $md0 3 $mdsize0 $chunk + mdadm -S $md0 + + # now with version-1 superblock + mdadm -CR $md0 -e1.0 -l0 -c $chunk -n4 $dev0 $dev1 $dev2 $dev3 + check raid0 + testdev $md0 4 $mdsize1 $chunk + mdadm -S $md0 + + # now with no superblock + mdadm -B $md0 -l0 -n5 --chun=$chunk $dev0 $dev1 $dev2 $dev3 $dev4 + check raid0 + testdev $md0 5 $size $chunk + mdadm -S $md0 + +done +exit 0 diff --git a/tests/00raid1 b/tests/00raid1 new file mode 100644 index 0000000..f6b8be1 --- /dev/null +++ b/tests/00raid1 @@ -0,0 +1,38 @@ + +# create a simple mirror +# test version0, version1, and no super +# test resync and recovery. + +# It's just a sanity check. This command shouldn't run successfully +mdadm -CR $md0 -l 1 -n2 missing missing +check opposite_result + +mdadm -CR $md0 -l 1 -n2 $dev0 $dev1 +check resync +check raid1 +testdev $md0 1 $mdsize1a 64 +mdadm -S $md0 + +# now with version-0.90 superblock, spare +mdadm -CR $md0 -e0.90 --level=raid1 -n3 -x2 $dev0 missing missing $dev1 $dev2 +check recovery +check raid1 +testdev $md0 1 $mdsize0 64 +mdadm -S $md0 + +# now with no superblock +mdadm -B $md0 -l mirror -n2 $dev0 $dev1 +check resync +check raid1 +testdev $md0 1 $size 1 +mdadm -S $md0 + +# again, but with no resync +mdadm -B $md0 -l 1 --assume-clean -n2 $dev0 $dev1 +check raid1 +check nosync +testdev $md0 1 $size 1 +mdadm -S $md0 + + +exit 0 diff --git a/tests/00raid10 b/tests/00raid10 new file mode 100644 index 0000000..796b970 --- /dev/null +++ b/tests/00raid10 @@ -0,0 +1,18 @@ + +# Create some raid10 arrays, all with 6 devices and one spare +devs="$dev0 $dev1 $dev2 $dev3 $dev4 $dev5 $dev6" + +for lo in n2 n3 f2 f3 +do + cm=1 + case $lo in + f2 ) m=3 cm=2;; + f3 ) m=2 cm=3;; + n2 ) m=3;; + n3 ) m=2;; + esac + mdadm --create --run --level=raid10 --layout $lo --raid-disks 6 -x 1 $md0 $devs + check resync ; check raid10 + testdev $md0 $m $mdsize1 $[512*cm] + mdadm -S $md0 +done diff --git a/tests/00raid4 b/tests/00raid4 new file mode 100644 index 0000000..00a14f2 --- /dev/null +++ b/tests/00raid4 @@ -0,0 +1,16 @@ + +# create a simple raid4 set + +mdadm -CfR $md0 -l 4 -n3 $dev0 $dev1 $dev2 +check resync ; check raid[45] +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +# now with version-1 superblock +mdadm -CR $md0 -e1 --level=raid4 -n4 $dev0 $dev1 $dev2 $dev3 +check recovery; check raid[45] +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + + +exit 0 diff --git a/tests/00raid5 b/tests/00raid5 new file mode 100644 index 0000000..b2b7a97 --- /dev/null +++ b/tests/00raid5 @@ -0,0 +1,33 @@ + +# create a simple raid5 set + +mdadm -CfR $md0 -e 0.90 -l 5 -n3 $dev0 $dev1 $dev2 +check resync +testdev $md0 2 $mdsize0 512 +mdadm -S $md0 + +# now with version-1 superblock +mdadm -CR $md0 -e1 --level=raid5 -n4 $dev0 $dev1 $dev2 $dev3 +check recovery +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + +# now same again with explicit layout + +for lo in la ra left-symmetric right-symmetric +do + + mdadm -CfR $md0 -l 5 -p $lo -n3 $dev0 $dev1 $dev2 + check resync ; check raid5 + testdev $md0 2 $mdsize1 512 + mdadm -S $md0 + + # now with version-1 superblock + mdadm -CR $md0 -e1 --level=raid5 --layout $lo -n4 $dev0 $dev1 $dev2 $dev3 + check recovery ; check raid5 + testdev $md0 3 $mdsize1 512 + mdadm -S $md0 + +done + +exit 0 diff --git a/tests/00raid6 b/tests/00raid6 new file mode 100644 index 0000000..6977af9 --- /dev/null +++ b/tests/00raid6 @@ -0,0 +1,16 @@ + +# create a simple raid6 set + +mdadm -CfR $md0 -e0.90 -l 6 -n4 $dev0 $dev1 $dev2 $dev3 +check resync ; check raid6 +testdev $md0 2 $mdsize0 512 +mdadm -S $md0 + +# now with version-1 superblock +mdadm -CR $md0 -e1 --level=raid6 -n5 $dev0 $dev1 $dev2 $dev3 $dev4 +check resync ; check raid6 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + + +exit 0 diff --git a/tests/00readonly b/tests/00readonly new file mode 100644 index 0000000..28b0fa1 --- /dev/null +++ b/tests/00readonly @@ -0,0 +1,22 @@ +#!/bin/bash + +for metadata in 0.9 1.0 1.1 1.2 +do + for level in linear raid0 raid1 raid4 raid5 raid6 raid10 + do + mdadm -CR $md0 -l $level -n 4 --metadata=$metadata \ + $dev1 $dev2 $dev3 $dev4 --assume-clean + check nosync + check $level + mdadm -ro $md0 + check readonly + state=$(cat /sys/block/md0/md/array_state) + [ "$state" == "readonly" ] || + die "array_state should be 'readonly', but is $state" + mdadm -w $md0 + check $level + mdadm -S $md0 + done +done + +exit 0 diff --git a/tests/01r1fail b/tests/01r1fail new file mode 100644 index 0000000..389b813 --- /dev/null +++ b/tests/01r1fail @@ -0,0 +1,29 @@ + +# create a raid1, fail and remove a drive during initial sync +# Add two more, fail and remove one +# wait for sync to complete, fail, remove, re-add + +mdadm -CR $md0 -l1 -n4 $dev0 $dev1 $dev2 missing +check resync +mdadm $md0 --fail $dev2 +check resync +mdadm $md0 --fail $dev1 +sleep 1 +check nosync +check state U___ +mdadm $md0 --add $dev4 $dev3 +check recovery +# there could be two separate recoveries, one for each dev +check wait +check wait +mdadm $md0 --remove $dev2 $dev1 +check nosync +check state UUU_ + +mdadm --zero-superblock $dev2 +mdadm $md0 -a $dev2 +check recovery +check wait +check state UUUU + +mdadm -S $md0 diff --git a/tests/01r5fail b/tests/01r5fail new file mode 100644 index 0000000..873dba5 --- /dev/null +++ b/tests/01r5fail @@ -0,0 +1,27 @@ + + +# create a raid5, fail and remove a drive during initial sync +# Add two more, fail and remove one +# wait for sync to complete, fail, remove, re-add + +mdadm -CR $md0 -l5 -n4 $dev0 $dev1 $dev2 $dev3 +check recovery +mdadm $md0 --fail $dev3 +sleep 1 +check nosync +check state UUU_ + +mdadm $md0 --add $dev4 $dev5 +check recovery +check wait +mdadm $md0 --fail $dev0 +mdadm $md0 --remove $dev3 $dev0 +check recovery +check state _UUU + +mdadm $md0 -a $dev3 +check recovery +check wait +check state UUUU + +mdadm -S $md0
\ No newline at end of file diff --git a/tests/01r5integ b/tests/01r5integ new file mode 100644 index 0000000..48676a2 --- /dev/null +++ b/tests/01r5integ @@ -0,0 +1,33 @@ + +# Check integrity of raid5 in degraded mode +# Create a 4 disk raid5, create a filesystem and +# sha1sum it with each device failed + +if [ "$INTEGRITY" != "yes" ]; then + echo -ne 'skipping... ' + exit 0 +fi + +for layout in ls rs la ra +do + mdadm -CR $md0 -l5 --layout $layout -n4 $dev0 $dev1 $dev2 $dev3 + check wait + tar cf - /etc > $md0 + sum=`sha1sum $md0` + + for i in $dev0 $dev1 $dev2 $dev3 + do + mdadm $md0 -f $i + mdadm $md0 -r $i + blockdev --flushbufs $md0 + sum1=`sha1sum $md0` + if [ "$sum" != "$sum1" ] + then + echo $sum does not match $sum1 with $i missing + exit 1 + fi + mdadm $md0 -a $i + while ! (check state 'U*'); do check wait; sleep 0.2; done + done + mdadm -S $md0 +done diff --git a/tests/01raid6integ b/tests/01raid6integ new file mode 100644 index 0000000..12f4d81 --- /dev/null +++ b/tests/01raid6integ @@ -0,0 +1,57 @@ + +# Check integrity of raid6 in degraded modes +# Create a 5 disk raid6, dump some data to it, then +# sha1sum it with different pairs of devices failed + +if [ "$INTEGRITY" != "yes" ]; then + echo -ne 'skipping... ' + exit 0 +fi + +layouts='ls rs la ra' +lv=`uname -r` +if expr $lv '>=' 2.6.30 > /dev/null +then + layouts="$layouts parity-first ddf-zero-restart ddf-N-restart ddf-N-continue \ + left-asymmetric-6 right-asymmetric-6 left-symmetric-6 right-symmetric-6 parity-first-6" +fi + +for layout in $layouts +do + mdadm -CR $md0 -l6 --layout $layout -n5 $dev0 $dev1 $dev2 $dev3 $dev4 + check wait + tar cf - /etc > $md0 + sum=`sha1sum $md0` + + totest= + for second in $dev0 $dev1 $dev2 $dev3 $dev4 + do + mdadm $md0 -f $second + mdadm $md0 -r $second + blockdev --flushbufs $md0 + sum1=`sha1sum $md0` + if [ "$sum" != "$sum1" ] + then + echo $sum does not match $sum1 with $second missing + exit 1 + fi + for first in $totest + do + mdadm $md0 -f $first + mdadm $md0 -r $first + blockdev --flushbufs $md0 + sum1=`sha1sum $md0` + if [ "$sum" != "$sum1" ] + then + echo $sum does not match $sum1 with $first and $second missing + exit 1 + fi + mdadm $md0 -a $first + while ! (check state 'U*_U*'); do check wait; sleep 0.2; done + done + mdadm $md0 -a $second + while ! (check state 'U*'); do check wait; sleep 0.2; done + totest="$totest $second" + done + mdadm -S $md0 +done diff --git a/tests/01replace b/tests/01replace new file mode 100644 index 0000000..6223a22 --- /dev/null +++ b/tests/01replace @@ -0,0 +1,52 @@ +set -x -e + +## test --replace for raid5 raid6 raid1 and raid10 +#1/ after replace, can remove replaced device +#2/ after --replace-with cannot remove the 'with' device +#3/ preserve integrity with concurrent failure + +for level in 1 5 6 10 +do + dd if=/dev/zero of=$dev4 bs=1M || true + dd if=/dev/zero of=$dev5 bs=1M || true + mdadm -CR $md0 -l $level -n4 -x2 $devlist5 + dd if=/dev/urandom of=$md0 bs=1M || true + sum=`sha1sum < $md0` + check wait + mdadm $md0 --replace $dev1 + check wait + mdadm $md0 --remove $dev1 + mdadm $md0 --remove $dev5 && exit 1 + mdadm -S $md0 + dd if=/dev/zero of=$dev4 bs=1M || true + dd if=/dev/zero of=$dev5 bs=1M || true + mdadm -CR $md0 -l $level -n4 -x2 $devlist5 + check wait + sum1=`sha1sum < $md0` + [ "$sum" == "$sum1" ] + + mdadm $md0 --replace $dev1 --with $dev4 + check wait + mdadm $md0 --remove $dev1 + mdadm $md0 --remove $dev5 + mdadm $md0 --remove $dev4 && exit 1 + + mdadm $md0 --add $dev1 $dev5 + mdadm $md0 --replace $dev0 + sleep 1 + mdadm $md0 --fail $dev2 + check wait + sum2=`sha1sum < $md0` + [ "$sum" == "$sum2" ] + + mdadm $md0 --remove $dev0 $dev2 + mdadm $md0 --add $dev0 $dev2 + mdadm $md0 --replace $dev3 + sleep 1 + mdadm $md0 --fail $dev0 $dev2 + check wait + sum3=`sha1sum < $md0` + [ "$sum" == "$sum3" ] + + mdadm -S $md0 +done diff --git a/tests/02lineargrow b/tests/02lineargrow new file mode 100644 index 0000000..e05c219 --- /dev/null +++ b/tests/02lineargrow @@ -0,0 +1,23 @@ + +# create a liner array, and add more drives to to. + +for e in 0.90 1 1.1 1.2 +do + case $e in + 0.90 ) sz=$mdsize0 ;; + 1 ) sz=$mdsize2_l ;; + 1.0 ) sz=$mdsize1 ;; + 1.1 ) sz=$mdsize1_l ;; + 1.2 ) sz=$mdsize2_l ;; + esac + mdadm -CRf $md0 --level linear -e $e --raid-disks=1 $dev1 + testdev $md0 1 $sz 1 + + mdadm --grow $md0 --add $dev2 + testdev $md0 2 $sz 1 + + mdadm --grow $md0 --add $dev3 + testdev $md0 3 $sz 1 + + mdadm -S $md0 +done diff --git a/tests/02r1add b/tests/02r1add new file mode 100644 index 0000000..757f696 --- /dev/null +++ b/tests/02r1add @@ -0,0 +1,40 @@ + +# Make a raid1, add a device, then remove it again. + +mdadm -CR $md0 -l1 -n2 -x1 $dev0 $dev1 $dev2 +check resync +check wait +check state UU + +mdadm --grow $md0 -n 3 +check recovery +check wait +check state UUU + +mdadm $md0 --fail $dev0 +check state _UU + +mdadm --grow $md0 -n 2 +check state UU + +mdadm -S $md0 +# same again for version-1 + + +mdadm -CR $md0 -l1 -n2 -e1.2 -x1 $dev0 $dev1 $dev2 +check resync +check wait +check state UU + +mdadm --grow $md0 -n 3 +check recovery +check wait +check state UUU + +mdadm $md0 --fail $dev0 +check state _UU + +mdadm --grow $md0 -n 2 +check state UU + +mdadm -S $md0 diff --git a/tests/02r1grow b/tests/02r1grow new file mode 100644 index 0000000..5754c88 --- /dev/null +++ b/tests/02r1grow @@ -0,0 +1,36 @@ + + +# create a small raid1 array, make it larger. Then make it smaller + +mdadm -CR $md0 -e 0.90 --level raid1 --raid-disks 3 --size $[size/2] $dev1 $dev2 $dev3 +check wait +check state UUU +testdev $md0 1 $[size/2] 1 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 1 $mdsize0 1 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 1 $[size/2] 1 + +mdadm -S $md0 + +# same again with version 1.1 superblock +mdadm -CR $md0 --level raid1 --metadata=1.1 --raid-disks 3 --size $[size/2] $dev1 $dev2 $dev3 +check wait +check state UUU +testdev $md0 1 $[size/2] 1 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 1 $mdsize1_l 1 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 1 $[size/2] 1 + +mdadm -S $md0 diff --git a/tests/02r5grow b/tests/02r5grow new file mode 100644 index 0000000..2da78ee --- /dev/null +++ b/tests/02r5grow @@ -0,0 +1,53 @@ + + +# create a small raid5 array, make it larger. Then make it smaller + +mdadm -CR $md0 -e0.90 --level raid5 --chunk=64 --raid-disks 3 --size $[size/2] $dev1 $dev2 $dev3 +check wait +check state UUU +testdev $md0 2 $[size/2] 32 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 2 $mdsize0 32 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 2 $[size/2] 32 + +mdadm -S $md0 + +# same again with version 1.1 superblock +mdadm -CR $md0 --level raid5 --metadata=1.1 --chunk=128 --raid-disks 4 --size $[size/2] $dev1 $dev2 $dev3 $dev4 +check wait +check state UUUU +testdev $md0 3 $[size/2] 128 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 3 $[mdsize1_l] 128 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 3 $[size/2] 128 + +mdadm -S $md0 + +# create a raid5 array and change the chunk +mdadm -CR $md0 --level raid5 --metadata=1.1 --chunk=32 --raid-disks 3 --size $[size/2] $dev1 $dev2 $dev3 +check wait +check state UUU +check chunk 32 + +mdadm $md0 --grow --chunk=64 +check reshape +check wait +check chunk 64 + +mdadm -S $md0 +mdadm -A $md0 $dev1 $dev2 $dev3 +check state UUU +check chunk 64 +mdadm -S $md0 diff --git a/tests/02r6grow b/tests/02r6grow new file mode 100644 index 0000000..759e627 --- /dev/null +++ b/tests/02r6grow @@ -0,0 +1,36 @@ + + +# create a small raid6 array, make it larger. Then make it smaller + +mdadm -CR $md0 -e 0.90 --level raid6 --chunk=64 --raid-disks 4 --size $[size/2] $dev1 $dev2 $dev3 $dev4 +check wait +check state UUUU +testdev $md0 2 $[size/2] 32 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 2 $mdsize0 32 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 2 $[size/2] 32 + +mdadm -S $md0 + +# same again with version 1.1 superblock +mdadm -CR $md0 --level raid6 --metadata=1.1 --chunk=128 --raid-disks 4 --size $[size/2] $dev1 $dev2 $dev3 $dev4 +check wait +check state UUUU +testdev $md0 2 $[size/2] 128 + +mdadm --grow $md0 --size max +check resync +check wait +testdev $md0 2 $[mdsize1_l] 128 + +mdadm --grow $md0 --size $[size/2] +check nosync +testdev $md0 2 $[size/2] 128 + +mdadm -S $md0 diff --git a/tests/03assem-incr b/tests/03assem-incr new file mode 100644 index 0000000..f10a1a4 --- /dev/null +++ b/tests/03assem-incr @@ -0,0 +1,17 @@ +set -x -e + +# Test interaction between -I and -A +# there are locking issue too, but those are hard to test for. +# +# Here just test that a partly "-I" assembled array can +# be completed with "-A" + +for l in 0 1 5 linear +do + mdadm -CR $md0 -l $l -n5 $dev0 $dev1 $dev2 $dev3 $dev4 --assume-clean + mdadm -S md0 + mdadm -I $dev1 + mdadm -I $dev3 + mdadm -A /dev/md0 $dev0 $dev1 $dev2 $dev3 $dev4 + mdadm -S /dev/md0 +done diff --git a/tests/03r0assem b/tests/03r0assem new file mode 100644 index 0000000..6744e32 --- /dev/null +++ b/tests/03r0assem @@ -0,0 +1,137 @@ + +# create a raid0 array from 3 devices, and assemble it in a multitude of ways. +# explicitly list devices +# uuid, md-minor on command line with wildcard devices +# mdadm.conf file + +mdadm -CR $md2 -l0 -n3 $dev0 $dev1 $dev2 +check raid0 +tst="testdev $md2 3 $mdsize1_l 512" +$tst +uuid=`mdadm -Db $md2 | sed 's/.*UUID=//'` +mdadm -S $md2 + +mdadm -A $md2 $dev0 $dev1 $dev2 +$tst +mdadm -S $md2 + +mdadm -A $md2 -u $uuid $devlist +$tst +mdadm -S $md2 + +mdadm --assemble $md2 --name=2 $devlist +$tst +mdadm -S $md2 + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md2 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md2 +$tst +mdadm -S $md2 + +{ + echo DEVICE $devlist + echo array $md2 name=2 +} > $conf + +mdadm -As -c $conf $md2 +$tst +mdadm -S $md2 + + +{ + echo DEVICE $devlist + echo array $md2 devices=$dev0,$dev1,$dev2 +} > $conf + +mdadm -As -c $conf $md2 +$tst + +echo "DEVICE $devlist" > $conf +mdadm -Db $md2 >> $conf +mdadm -S $md2 + +mdadm --assemble --scan --config=$conf $md2 +$tst +mdadm -S $md2 + +echo " metadata=0.90 devices=$dev0,$dev1,$dev2" >> $conf +mdadm --assemble --scan --config=$conf $md2 +$tst +mdadm -S $md2 + + +### Now for version 0... + +mdadm --zero-superblock $dev0 $dev1 $dev2 +mdadm -CR $md2 -l0 --metadata=0.90 -n3 $dev0 $dev1 $dev2 +check raid0 +tst="testdev $md2 3 $mdsize0 512" +$tst + +uuid=`mdadm -Db $md2 | sed 's/.*UUID=//'` +mdadm -S $md2 + +mdadm -A $md2 $dev0 $dev1 $dev2 +$tst +mdadm -S $md2 + +mdadm -A $md2 -u $uuid $devlist +$tst +mdadm -S $md2 + +mdadm --assemble $md2 --super-minor=2 $devlist # +$tst +mdadm -S $md2 + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md2 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md2 +$tst +mdadm -S $md2 + +{ + echo DEVICE $devlist + echo array $md2 super-minor=2 +} > $conf + +mdadm -As -c $conf $md2 +$tst +mdadm -S $md2 + + +{ + echo DEVICE $devlist + echo array $md2 devices=$dev0,$dev1,$dev2 +} > $conf + +mdadm -As -c $conf $md2 +$tst + +echo "DEVICE $devlist" > $conf +mdadm -Db $md2 >> $conf +mdadm -S $md2 + +mdadm --assemble --scan --config=$conf $md2 +$tst +mdadm -S $md2 + +echo " metadata=1 devices=$dev0,$dev1,$dev2" >> $conf +mdadm --assemble --scan --config=$conf $md2 +$tst +mdadm -S $md2 + +# Now use incremental assembly. +mdadm -I --config=$conf $dev0 +mdadm -I --config=$conf $dev1 +mdadm -I --config=$conf $dev2 +$tst +mdadm -S $md2 diff --git a/tests/03r5assem b/tests/03r5assem new file mode 100644 index 0000000..0c7fb8c --- /dev/null +++ b/tests/03r5assem @@ -0,0 +1,109 @@ + +# create a raid5 array and assemble it in various ways, +# including with missing devices. + +mdadm -CR -e 0.90 $md1 -l5 -n3 $dev0 $dev1 $dev2 +tst="check raid5 ;testdev $md1 2 $mdsize0 512 ; mdadm -S $md1" +uuid=`mdadm -Db $md1 | sed 's/.*UUID=//'` +check wait +eval $tst + +mdadm -A $md1 $dev0 $dev1 $dev2 +eval $tst + +mdadm -A $md1 -u $uuid $devlist +eval $tst + +mdadm -A $md1 -m 1 $devlist +eval $tst + + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md1 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md1 +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 super-minor=1 +} > $conf + +mdadm -As -c $conf +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 devices=$dev0,$dev1,$dev2 +} > $conf + +mdadm -As -c $conf + +echo "DEVICE $devlist" > $conf +mdadm -Db $md1 >> $conf +eval $tst + +mdadm --assemble --scan --config=$conf $md1 +eval $tst + +echo " metadata=0.90 devices=$dev0,$dev1,$dev2" >> $conf +mdadm --assemble --scan --config=$conf $md1 +eval $tst + +### Now with a missing device + +mdadm -AR $md1 $dev0 $dev2 # +check state U_U +eval $tst + +mdadm -A $md1 -u $uuid $devlist +check state U_U +eval $tst + +mdadm -A $md1 -m 1 $devlist +check state U_U +eval $tst + + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md1 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md1 +check state U_U +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 super-minor=1 +} > $conf + +mdadm -As -c $conf +check state U_U +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 devices=$dev0,$dev1,$dev2 +} > $conf + +mdadm -As -c $conf + +echo "DEVICE $devlist" > $conf +mdadm -Db $md1 >> $conf +check state U_U +eval $tst + +mdadm --assemble --scan --config=$conf $md1 +check state U_U +eval $tst + +echo " metadata=0.90 devices=$dev0,$dev1,$dev2" >> $conf +mdadm --assemble --scan --config=$conf $md1 +check state U_U +eval $tst diff --git a/tests/03r5assem-failed b/tests/03r5assem-failed new file mode 100644 index 0000000..d38241d --- /dev/null +++ b/tests/03r5assem-failed @@ -0,0 +1,12 @@ + +# Create an array, fail one device while array is active, stop array, +# then re-assemble listing the failed device first. + +mdadm -CR $md1 -l5 -n4 $dev0 $dev1 $dev2 $dev3 +check wait + +echo 2000 > /sys/block/md1/md/safe_mode_delay +mkfs $md1 +mdadm $md1 -f $dev0 +mdadm -S $md1 +mdadm -A $md1 $dev0 $dev1 $dev2 $dev3 || exit 1 diff --git a/tests/03r5assemV1 b/tests/03r5assemV1 new file mode 100644 index 0000000..bca0c58 --- /dev/null +++ b/tests/03r5assemV1 @@ -0,0 +1,128 @@ + +# create a v-1 raid5 array and assemble in various ways + +mdadm -CR -e1 --name one $md1 -l5 -n3 -x2 $dev0 $dev1 $dev2 $dev3 $dev4 +tst="check raid5 ;testdev $md1 2 $mdsize1 512 ; mdadm -S $md1" +uuid=`mdadm -Db $md1 | sed 's/.*UUID=//'` +check wait + +eval $tst + +mdadm -A $md1 $dev0 $dev1 $dev2 +mdadm $md1 --add $dev3 $dev4 +check spares 2 +eval $tst + +mdadm -A $md1 -u $uuid $devlist +check spares 2 +eval $tst + +mdadm -A $md1 --name one $devlist +check spares 2 +eval $tst + + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md1 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md1 +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 name=one +} > $conf + +mdadm -As -c $conf +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 devices=$dev0,$dev1,$dev2,$dev3,$dev4 +} > $conf + +mdadm -As -c $conf + +echo "DEVICE $devlist" > $conf +mdadm -Db $md1 >> $conf +eval $tst +mdadm --assemble --scan --config=$conf $md1 +eval $tst +echo PING >&2 + +echo " metadata=1.0 devices=$dev0,$dev1,$dev2,$dev3,$dev4" >> $conf +mdadm --assemble --scan --config=$conf $md1 +eval $tst + +### Now with a missing device +# We don't want the recovery to complete while we are +# messing about here. +echo 100 > /proc/sys/dev/raid/speed_limit_max +echo 100 > /proc/sys/dev/raid/speed_limit_min + +mdadm -AR $md1 $dev0 $dev2 $dev3 $dev4 # +check state U_U +check spares 1 +eval $tst + +mdadm -A $md1 -u $uuid $devlist +check state U_U +eval $tst + +mdadm -A $md1 --name=one $devlist +check state U_U +check spares 1 +eval $tst + + +conf=$targetdir/mdadm.conf +{ + echo DEVICE $devlist + echo array $md1 UUID=$uuid +} > $conf + +mdadm -As -c $conf $md1 +check state U_U +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 name=one +} > $conf + +mdadm -As -c $conf +check state U_U +eval $tst + +{ + echo DEVICE $devlist + echo array $md1 devices=$dev0,$dev1,$dev2 +} > $conf + +mdadm -As -c $conf + +echo "DEVICE $devlist" > $conf +mdadm -Db $md1 >> $conf +check state U_U +eval $tst + +mdadm --assemble --scan --config=$conf $md1 +check state U_U +eval $tst + +echo " metadata=1.0 devices=$dev0,$dev1,$dev2" >> $conf +mdadm --assemble --scan --config=$conf $md1 +check state U_U +eval $tst + +# And now assemble with -I +mdadm -Ss +mdadm -I -c $conf $dev0 +mdadm -I -c $conf $dev1 +mdadm -I -c $conf $dev2 +eval $tst +echo 2000 > /proc/sys/dev/raid/speed_limit_max +echo 1000 > /proc/sys/dev/raid/speed_limit_min diff --git a/tests/04r0update b/tests/04r0update new file mode 100644 index 0000000..73ee3b9 --- /dev/null +++ b/tests/04r0update @@ -0,0 +1,20 @@ + +# create a raid0, re-assemble with a different super-minor +mdadm -CR -e 0.90 $md0 -l0 -n3 $dev0 $dev1 $dev2 +testdev $md0 3 $mdsize0 512 +minor1=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'` +mdadm -S /dev/md0 + +mdadm -A $md1 $dev0 $dev1 $dev2 +minor2=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'` +mdadm -S /dev/md1 + +mdadm -A $md1 --update=super-minor $dev0 $dev1 $dev2 +minor3=`mdadm -E $dev0 | sed -n -e 's/.*Preferred Minor : //p'` +mdadm -S /dev/md1 + +case "$minor1 $minor2 $minor3" in + "0 0 1" ) ;; + * ) echo >&2 "ERROR minors should be '0 0 1' but are '$minor1 $minor2 $minor3'" + exit 1 +esac diff --git a/tests/04r1update b/tests/04r1update new file mode 100644 index 0000000..e22965b --- /dev/null +++ b/tests/04r1update @@ -0,0 +1,15 @@ +set -i + +# create a raid1 array, let it sync, then re-assemble with a force-sync + +mdadm -CR $md0 -l1 -n2 $dev0 $dev1 +check wait +mdadm -S $md0 + +mdadm -A $md0 $dev0 $dev1 +check nosync +mdadm -S $md0 + +mdadm -A $md0 -U resync $dev0 $dev1 +check resync +mdadm -S $md0 diff --git a/tests/04r5swap b/tests/04r5swap new file mode 100644 index 0000000..5373a60 --- /dev/null +++ b/tests/04r5swap @@ -0,0 +1,18 @@ + +# make a raid5 array, byte swap the superblocks, then assemble... + +mdadm -CR $md0 -e 0.90 -l5 -n4 $dev0 $dev1 $dev2 $dev3 +sleep 4 +mdadm -S $md0 + +mdadm -E --metadata=0 $dev1 > $targetdir/d1 +for d in $dev0 $dev1 $dev2 $dev3 +do $dir/swap_super $d +done +mdadm -E --metadata=0.swap $dev1 > $targetdir/d1s +diff -u $targetdir/d1 $targetdir/d1s + +mdadm --assemble --update=byteorder $md0 $dev0 $dev1 $dev2 $dev3 +sleep 3 +check recovery +mdadm -S $md0 diff --git a/tests/04update-metadata b/tests/04update-metadata new file mode 100644 index 0000000..232fc1f --- /dev/null +++ b/tests/04update-metadata @@ -0,0 +1,48 @@ +set -xe + +# test converting v0.90 to v1.0 +# check for different levels +# check it fails for non-v0.90 +# check it fails during reshape or recovery +# check it fails when bitmap is present + +dlist="$dev0 $dev1 $dev2 $dev3" + +for ls in raid0/4 linear/4 raid1/1 raid5/3 raid6/2 +do + s=${ls#*/} l=${ls%/*} + mdadm -CR --assume-clean -e 0.90 $md0 --level $l -n 4 -c 64 $dlist + testdev $md0 $s 19904 64 + mdadm -S $md0 + mdadm -A $md0 --update=metadata $dlist + testdev $md0 $s 19904 64 check + mdadm -S $md0 +done + +if mdadm -A $md0 --update=metadata $dlist +then echo >&2 should fail with v1.0 metadata + exit 1 +fi + +mdadm -CR -e 0.90 $md0 --level=6 -n4 -c32 $dlist +mdadm -S $md0 + +if mdadm -A $md0 --update=metadata $dlist +then echo >&2 should fail during resync + exit 1 +fi +mdadm -A $md0 $dlist +mdadm --wait $md0 || true +mdadm -S $md0 + +# should succeed now +mdadm -A $md0 --update=metadata $dlist + +mdadm -S /dev/md0 +mdadm -CR --assume-clean -e 0.90 $md0 --level=6 -n4 -c32 $dlist --bitmap=internal +mdadm -S $md0 + +if mdadm -A $md0 --update=metadata $dlist +then echo >&2 should fail when bitmap present + exit 1 +fi diff --git a/tests/04update-uuid b/tests/04update-uuid new file mode 100644 index 0000000..a4409e7 --- /dev/null +++ b/tests/04update-uuid @@ -0,0 +1,82 @@ +set -x + +# create an array, then change the uuid. + +mdadm -CR --assume-clean $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +mdadm -S /dev/md0 + +# try v1 superblock + +mdadm -CR --assume-clean -e1 $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +mdadm -S /dev/md0 + + +# now if we have a bitmap, that needs updating too. +rm -f $targetdir/bitmap +mdadm -CR --assume-clean -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +if mdadm -X $targetdir/bitmap | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || + mdadm -X $targetdir/bitmap | grep -s > /dev/null 67452301:efcdab89:98badcfe:10325476 +then : ; else + echo Wrong uuid; mdadm -X $targetdir/bitmap ; exit 2; +fi +mdadm -S /dev/md0 + +# and bitmap for version1 +rm -f $targetdir/bitmap +mdadm -CR --assume-clean -e1.1 -b $targetdir/bitmap $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 -b $targetdir/bitmap --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +# -X cannot tell which byteorder to use for the UUID, so allow both. +if mdadm -X $targetdir/bitmap | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || + mdadm -X $targetdir/bitmap | grep -s > /dev/null 67452301:efcdab89:98badcfe:10325476 +then : ; else + echo Wrong uuid; mdadm -X $targetdir/bitmap ; exit 2; +fi +mdadm -S /dev/md0 + +# Internal bitmaps too. +mdadm -CR --assume-clean -b internal --bitmap-chunk 4 $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +mdadm -X $dev0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -X $dev0; exit 2; +} +mdadm -S /dev/md0 + +mdadm -CR --assume-clean -e1.2 -b internal --bitmap-chunk=4 $md0 -l5 -n3 $dev0 $dev1 $dev2 +mdadm -S /dev/md0 +mdadm -A /dev/md0 --update=uuid --uuid=0123456789abcdef:fedcba9876543210 $dev0 $dev1 $dev2 +no_errors +mdadm -D /dev/md0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -D /dev/md0 ; exit 2; +} +mdadm -X $dev0 | grep -s > /dev/null 01234567:89abcdef:fedcba98:76543210 || { + echo Wrong uuid; mdadm -X $dev0; exit 2; +} +mdadm -S /dev/md0 diff --git a/tests/05r1-add-internalbitmap b/tests/05r1-add-internalbitmap new file mode 100644 index 0000000..4e20305 --- /dev/null +++ b/tests/05r1-add-internalbitmap @@ -0,0 +1,20 @@ +# +# create a raid1 without any bitmap, add the bitmap and then write to +# the device. This should catch the case where the bitmap is created +# but not reloaded correctly, such as the case fixed by +# 4474ca42e2577563a919fd3ed782e2ec55bf11a2 +# +mdadm --create --run $md0 --metadata=0.9 --level=1 -n2 --delay=1 $dev1 $dev2 +check wait +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb internal --bitmap-chunk=4 $md0 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-add-internalbitmap-v1a b/tests/05r1-add-internalbitmap-v1a new file mode 100644 index 0000000..721a41c --- /dev/null +++ b/tests/05r1-add-internalbitmap-v1a @@ -0,0 +1,20 @@ +# +# create a raid1 without any bitmap, add the bitmap and then write to +# the device. This should catch the case where the bitmap is created +# but not reloaded correctly, such as the case fixed by +# 4474ca42e2577563a919fd3ed782e2ec55bf11a2 +# +mdadm --create --run $md0 --metadata=1.0 --level=1 -n2 --delay=1 $dev1 $dev2 +check wait +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb internal --bitmap-chunk=4 $md0 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-add-internalbitmap-v1b b/tests/05r1-add-internalbitmap-v1b new file mode 100644 index 0000000..da78fd6 --- /dev/null +++ b/tests/05r1-add-internalbitmap-v1b @@ -0,0 +1,20 @@ +# +# create a raid1 without any bitmap, add the bitmap and then write to +# the device. This should catch the case where the bitmap is created +# but not reloaded correctly, such as the case fixed by +# 4474ca42e2577563a919fd3ed782e2ec55bf11a2 +# +mdadm --create --run $md0 --metadata=1.1 --level=1 -n2 --delay=1 $dev1 $dev2 +check wait +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb internal --bitmap-chunk=4 $md0 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-add-internalbitmap-v1c b/tests/05r1-add-internalbitmap-v1c new file mode 100644 index 0000000..9f2f128 --- /dev/null +++ b/tests/05r1-add-internalbitmap-v1c @@ -0,0 +1,20 @@ +# +# create a raid1 without any bitmap, add the bitmap and then write to +# the device. This should catch the case where the bitmap is created +# but not reloaded correctly, such as the case fixed by +# 4474ca42e2577563a919fd3ed782e2ec55bf11a2 +# +mdadm --create --run $md0 --metadata=1.2 --level=1 -n2 --delay=1 $dev1 $dev2 +check wait +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb internal --bitmap-chunk=4 $md0 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-bitmapfile b/tests/05r1-bitmapfile new file mode 100644 index 0000000..f384f0e --- /dev/null +++ b/tests/05r1-bitmapfile @@ -0,0 +1,49 @@ + +# +# create a raid1 with a bitmap file +# +bmf=$targetdir/bitmap +rm -f $bmf +mdadm --create --run $md0 --level=1 -n2 --delay=1 --bitmap $bmf $dev1 $dev2 +check wait +testdev $md0 1 $mdsize1a 64 +mdadm -S $md0 + +mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 +testdev $md0 1 $mdsize1a 64 +dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 1 $mdsize1a 64 +sleep 4 +dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 --bitmap=$bmf $dev2 +dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +mdadm --zero $dev1 # force --add, not --re-add +mdadm $md0 --add $dev1 +#it is too fast# check recovery + +check wait +sleep 4 +dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r1-failfast b/tests/05r1-failfast new file mode 100644 index 0000000..823dd6f --- /dev/null +++ b/tests/05r1-failfast @@ -0,0 +1,74 @@ + +# create a simple mirror and check failfast flag works +mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1 +check raid1 +if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null +then + die "failfast missing" +fi + +# Removing works with the failfast flag +mdadm $md0 -f $dev0 +mdadm $md0 -r $dev0 +if grep -v failfast /sys/block/md0/md/rd1/state > /dev/null +then + die "failfast missing" +fi + +# Adding works with the failfast flag +mdadm $md0 -a --failfast $dev0 +check wait +if grep -v failfast /sys/block/md0/md/rd0/state > /dev/null +then + die "failfast missing" +fi + +mdadm -S $md0 + +# Assembling works with the failfast flag +mdadm -A $md0 $dev0 $dev1 +check raid1 +if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null +then + die "failfast missing" +fi + +# Adding works with the nofailfast flag +mdadm $md0 -f $dev0 +mdadm $md0 -r $dev0 +mdadm $md0 -a --nofailfast $dev0 +check wait +if grep failfast /sys/block/md0/md/rd0/state > /dev/null +then + die "failfast should be missing" +fi + +# Assembling with one faulty slave works with the failfast flag +mdadm $md0 -f $dev0 +mdadm $md0 -r $dev0 +mdadm -S $md0 +mdadm -A $md0 $dev0 $dev1 +check raid1 +mdadm -S $md0 + +# Spare works with the failfast flag +mdadm -CR $md0 -e1.2 --level=raid1 --failfast -n2 $dev0 $dev1 +check raid1 +mdadm $md0 -a --failfast $dev2 +check wait +check spares 1 +if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null +then + die "failfast missing" +fi + +# Grow works with the failfast flag +mdadm -G $md0 --raid-devices=3 +check wait +if grep -v failfast /sys/block/md0/md/rd*/state > /dev/null +then + die "failfast missing" +fi +mdadm -S $md0 + +exit 0 diff --git a/tests/05r1-grow-external b/tests/05r1-grow-external new file mode 100644 index 0000000..69da3e9 --- /dev/null +++ b/tests/05r1-grow-external @@ -0,0 +1,33 @@ + +# +# create a raid1 array, add an external bitmap +# +mdadm --create --run $md0 -l 1 -n 2 $dev1 $dev2 +check wait +testdev $md0 1 $mdsize1a 64 + +bmf=$targetdir/bm +rm -f $bmf +#mdadm -E $dev1 +mdadm --grow $md0 --bitmap=$bmf --delay=1 || { mdadm -X $bmf ; exit 1; } +dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +testdev $md0 1 $mdsize1a 64 +dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +#echo $dirty1 $dirty2 $dirty3 $dirty4 +if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ] +then + echo bad dirty counts + exit 1 +fi + +# now to remove the bitmap +check bitmap +mdadm --grow $md0 --bitmap=none +check nobitmap +mdadm -S $md0 diff --git a/tests/05r1-grow-internal b/tests/05r1-grow-internal new file mode 100644 index 0000000..24b3aec --- /dev/null +++ b/tests/05r1-grow-internal @@ -0,0 +1,31 @@ + +# +# create a raid1 array, add an internal bitmap +# +mdadm --create --run $md0 -l 1 -n 2 $dev1 $dev2 +check wait +testdev $md0 1 $mdsize1a 64 + +#mdadm -E $dev1 +mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1 || { mdadm -X $dev2 ; exit 1; } +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +testdev $md0 1 $mdsize1a 64 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +#echo $dirty1 $dirty2 $dirty3 $dirty4 +if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ] +then + echo bad dirty counts + exit 1 +fi + +# now to remove the bitmap +check bitmap +mdadm --grow $md0 --bitmap=none +check nobitmap +mdadm -S $md0 diff --git a/tests/05r1-grow-internal-1 b/tests/05r1-grow-internal-1 new file mode 100644 index 0000000..2f0d823 --- /dev/null +++ b/tests/05r1-grow-internal-1 @@ -0,0 +1,31 @@ + +# +# create a raid1 array, version 1 superblock, add an internal bitmap +# +mdadm --create --run $md0 -e1 -l 1 -n 2 $dev1 $dev2 +check wait +testdev $md0 1 $mdsize1b 64 + +#mdadm -E $dev1 +mdadm --grow $md0 --bitmap=internal --bitmap-chunk=4 --delay=1 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +testdev $md0 1 $mdsize1b 64 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +#echo $dirty1 $dirty2 $dirty3 $dirty4 +if [ $dirty2 -ne 0 -o $dirty4 -ne 0 -o $dirty3 -lt 400 ] +then + echo bad dirty counts + exit 1 +fi + +# now to remove the bitmap +check bitmap +mdadm --grow $md0 --bitmap=none +check nobitmap +mdadm -S $md0 diff --git a/tests/05r1-internalbitmap b/tests/05r1-internalbitmap new file mode 100644 index 0000000..dd7232a --- /dev/null +++ b/tests/05r1-internalbitmap @@ -0,0 +1,47 @@ + +# +# create a raid1 with an internal bitmap +# +mdadm --create -e0.90 --run $md0 --level=1 -n2 --delay=1 --bitmap internal --bitmap-chunk=4 $dev1 $dev2 +check wait +testdev $md0 1 $mdsize0 64 +mdadm -S $md0 + +mdadm --assemble $md0 $dev1 $dev2 +testdev $md0 1 $mdsize0 64 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 1 $mdsize0 64 +sleep 4 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 $dev2 +mdadm --zero-superblock $dev1 +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r1-internalbitmap-v1a b/tests/05r1-internalbitmap-v1a new file mode 100644 index 0000000..3ddc082 --- /dev/null +++ b/tests/05r1-internalbitmap-v1a @@ -0,0 +1,48 @@ + +# +# create a raid1 with an internal bitmap +# +mdadm --create --run $md0 --metadata=1.0 --level=1 -n2 --delay=1 --bitmap internal --bitmap-chunk=4 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +mdadm --assemble $md0 $dev1 $dev2 +testdev $md0 1 $mdsize1b 64 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 1 $mdsize1b 64 +sleep 4 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --zero-superblock $dev1 +mdadm --assemble -R $md0 $dev2 +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r1-internalbitmap-v1b b/tests/05r1-internalbitmap-v1b new file mode 100644 index 0000000..40f7abe --- /dev/null +++ b/tests/05r1-internalbitmap-v1b @@ -0,0 +1,49 @@ + +# +# create a raid1 with an internal bitmap +# +mdadm --create --run $md0 --metadata=1.1 --level=1 -n2 --delay=1 --bitmap internal --bitmap-chunk=4 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize11 64 +mdadm -S $md0 + +mdadm --assemble $md0 $dev1 $dev2 +check bitmap +testdev $md0 1 $mdsize11 64 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 1 $mdsize11 64 +sleep 4 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --zero-superblock $dev1 +mdadm --assemble -R $md0 $dev2 +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r1-internalbitmap-v1c b/tests/05r1-internalbitmap-v1c new file mode 100644 index 0000000..2eaea59 --- /dev/null +++ b/tests/05r1-internalbitmap-v1c @@ -0,0 +1,48 @@ + +# +# create a raid1 with an internal bitmap +# +mdadm --create --run $md0 --metadata=1.2 --level=1 -n2 --delay=1 --bitmap internal --bitmap-chunk 4 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize12 64 +mdadm -S $md0 + +mdadm --assemble $md0 $dev1 $dev2 +testdev $md0 1 $mdsize12 64 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 1 $mdsize12 64 +sleep 4 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --zero-superblock $dev1 +mdadm --assemble -R $md0 $dev2 +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r1-n3-bitmapfile b/tests/05r1-n3-bitmapfile new file mode 100644 index 0000000..f1c3f1e --- /dev/null +++ b/tests/05r1-n3-bitmapfile @@ -0,0 +1,53 @@ + +# +# create a raid1 with 3 devices and a bitmap file +# make sure resync does right thing. +# +# +bmf=$targetdir/bitmap +rm -f $bmf +mdadm --create -e0.90 --run $md0 --level=1 -n3 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3 +check wait +testdev $md0 1 $mdsize0 64 +mdadm -S $md0 + +mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3 +testdev $md0 1 $mdsize0 64 +dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev2 +testdev $md0 1 $mdsize0 64 +sleep 4 +dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev3 +check nosync +mdadm --zero-superblock $dev2 +mdadm $md0 --add $dev2 +check recovery + +dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 +exit 0 diff --git a/tests/05r1-re-add b/tests/05r1-re-add new file mode 100644 index 0000000..fa6bbcb --- /dev/null +++ b/tests/05r1-re-add @@ -0,0 +1,39 @@ + +# +# create a raid1, remove a drive, and readd it. +# resync should be instant. +# Then do some IO first. Resync should still be very fast +# + +mdadm -CR $md0 -l1 -n2 -binternal --bitmap-chunk=4 -d1 $dev1 $dev2 +check resync +check wait +testdev $md0 1 $mdsize1a 64 +sleep 4 + +mdadm $md0 -f $dev2 +sleep 1 +mdadm $md0 -r $dev2 +mdadm $md0 -a $dev2 +#cat /proc/mdstat +check nosync + +mdadm $md0 -f $dev2 +sleep 1 +mdadm $md0 -r $dev2 +testdev $md0 1 $mdsize1a 64 +mdadm $md0 -a $dev2 +check wait +blockdev --flushbufs $dev1 $dev2 +cmp --ignore-initial=$[64*512] --bytes=$[$mdsize0*1024] $dev1 $dev2 + +mdadm $md0 -f $dev2; sleep 1 +mdadm $md0 -r $dev2 +if dd if=/dev/zero of=$md0 ; then : ; fi +blockdev --flushbufs $md0 # ensure writes have been sent. +mdadm $md0 -a $dev2 +check recovery +check wait +blockdev --flushbufs $dev1 $dev2 +cmp --ignore-initial=$[64*512] --bytes=$[$mdsize0*1024] $dev1 $dev2 +mdadm -S $md0 diff --git a/tests/05r1-re-add-nosuper b/tests/05r1-re-add-nosuper new file mode 100644 index 0000000..058d602 --- /dev/null +++ b/tests/05r1-re-add-nosuper @@ -0,0 +1,38 @@ + +# +# create a raid1, remove a drive, and readd it. +# resync should be instant. +# Then do some IO first. Resync should still be very fast +# +bmf=$targetdir/bitmap2 +rm -f $bmf +mdadm -B $md0 -l1 -n2 -b$bmf -d1 $dev1 $dev2 +check resync +check wait +testdev $md0 1 $size 1 +sleep 4 + +mdadm $md0 -f $dev2 +sleep 1 +mdadm $md0 -r $dev2 +mdadm $md0 --re-add $dev2 +check nosync + +mdadm $md0 -f $dev2 +sleep 1 +mdadm $md0 -r $dev2 +testdev $md0 1 $size 1 +mdadm $md0 --re-add $dev2 +check wait +cmp --bytes=$[$mdsize0*1024] $dev1 $dev2 + +mdadm $md0 -f $dev2; sleep 1 +mdadm $md0 -r $dev2 +if dd if=/dev/zero of=$md0 ; then : ; fi +blockdev --flushbufs $md0 # make sure writes have been sent +mdadm $md0 --re-add $dev2 +check recovery +check wait +# should BLKFLSBUF and then read $dev1/$dev2... +cmp --bytes=$[$mdsize0*1024] $file1 $file2 +mdadm -S $md0 diff --git a/tests/05r1-remove-internalbitmap b/tests/05r1-remove-internalbitmap new file mode 100644 index 0000000..712fd56 --- /dev/null +++ b/tests/05r1-remove-internalbitmap @@ -0,0 +1,18 @@ +# +# create a raid1 with bitmap, remove the bitmap and verify it is still +# gone when re-assembling the array +# +mdadm --create --run $md0 --metadata=0.9 --level=1 -n2 --bitmap internal --bitmap-chunk=4 --delay=1 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb none $md0 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-remove-internalbitmap-v1a b/tests/05r1-remove-internalbitmap-v1a new file mode 100644 index 0000000..a4a9aaf --- /dev/null +++ b/tests/05r1-remove-internalbitmap-v1a @@ -0,0 +1,18 @@ +# +# create a raid1 with bitmap, remove the bitmap and verify it is still +# gone when re-assembling the array +# +mdadm --create --run $md0 --metadata=1.0 --level=1 -n2 --bitmap internal --bitmap-chunk=4 --delay=1 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb none $md0 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-remove-internalbitmap-v1b b/tests/05r1-remove-internalbitmap-v1b new file mode 100644 index 0000000..c0918eb --- /dev/null +++ b/tests/05r1-remove-internalbitmap-v1b @@ -0,0 +1,18 @@ +# +# create a raid1 with bitmap, remove the bitmap and verify it is still +# gone when re-assembling the array +# +mdadm --create --run $md0 --metadata=1.1 --level=1 -n2 --bitmap internal --bitmap-chunk=4 --delay=1 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb none $md0 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r1-remove-internalbitmap-v1c b/tests/05r1-remove-internalbitmap-v1c new file mode 100644 index 0000000..15f1fbb --- /dev/null +++ b/tests/05r1-remove-internalbitmap-v1c @@ -0,0 +1,18 @@ +# +# create a raid1 with bitmap, remove the bitmap and verify it is still +# gone when re-assembling the array +# +mdadm --create --run $md0 --metadata=1.2 --level=1 -n2 --bitmap internal --bitmap-chunk=4 --delay=1 $dev1 $dev2 +check wait +check bitmap +testdev $md0 1 $mdsize1b 64 +mdadm -Gb none $md0 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 + +# Re-assemble the array and verify the bitmap is still present +mdadm --assemble $md0 $dev1 $dev2 +check nobitmap +testdev $md0 1 $mdsize1b 64 +mdadm -S $md0 diff --git a/tests/05r5-bitmapfile b/tests/05r5-bitmapfile new file mode 100644 index 0000000..6d173d8 --- /dev/null +++ b/tests/05r5-bitmapfile @@ -0,0 +1,49 @@ + +# +# create a raid1 with a bitmap file +# +bmf=$targetdir/bitmap +rm -f $bmf +mdadm --create --run $md0 --level=5 -n3 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3 +check wait +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3 +testdev $md0 2 $mdsize1 512 +dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 2 $mdsize1 512 +sleep 4 +dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 --bitmap=$bmf $dev2 $dev3 +mdadm --zero $dev1 # force add, not re-add +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r5-internalbitmap b/tests/05r5-internalbitmap new file mode 100644 index 0000000..13dc592 --- /dev/null +++ b/tests/05r5-internalbitmap @@ -0,0 +1,47 @@ + +# +# create a raid1 with an internal bitmap +# +mdadm --create --run $md0 --level=5 -n3 --delay=1 --bitmap internal --bitmap-chunk=4 $dev1 $dev2 $dev3 +check wait +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +mdadm --assemble $md0 $dev1 $dev2 $dev3 +testdev $md0 2 $mdsize1 512 +dirty1=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev1 +testdev $md0 2 $mdsize1 512 +sleep 4 +dirty3=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 $dev2 $dev3 +mdadm --zero $dev1 # force --add, not --re-add +mdadm $md0 --add $dev1 +check recovery + +dirty4=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $dev2 | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r6-bitmapfile b/tests/05r6-bitmapfile new file mode 100644 index 0000000..d11896d --- /dev/null +++ b/tests/05r6-bitmapfile @@ -0,0 +1,49 @@ + +# +# create a raid1 with a bitmap file +# +bmf=$targetdir/bitmap +rm -f $bmf +mdadm --create --run $md0 --level=6 -n4 --delay=1 --bitmap $bmf $dev1 $dev2 $dev3 $dev4 +check wait +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +mdadm --assemble $md0 --bitmap=$bmf $dev1 $dev2 $dev3 $dev4 +testdev $md0 2 $mdsize1 512 +dirty1=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +sleep 4 +dirty2=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty1 -lt 400 -o $dirty2 -ne 0 ] +then echo >&2 "ERROR bad 'dirty' counts: $dirty1 and $dirty2" + exit 1 +fi +mdadm $md0 -f $dev3 +testdev $md0 2 $mdsize1 512 +sleep 4 +dirty3=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +if [ $dirty3 -lt 400 ] +then + echo >&2 "ERROR dirty count $dirty3 is too small" + exit 2 +fi + +mdadm -S $md0 + +mdadm --assemble -R $md0 --bitmap=$bmf $dev1 $dev2 $dev4 +mdadm --zero $dev3 # force --add, not --re-add +mdadm $md0 --add $dev3 +check recovery + +dirty4=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` +check wait +sleep 4 +dirty5=`mdadm -X $bmf | sed -n -e 's/.*Bitmap.* \([0-9]*\) dirty.*/\1/p'` + +if [ $dirty4 -lt 400 -o $dirty5 -ne 0 ] +then echo echo >&2 "ERROR bad 'dirty' counts at end: $dirty4 $dirty5" + exit 1 +fi + +mdadm -S $md0 diff --git a/tests/05r6tor0 b/tests/05r6tor0 new file mode 100644 index 0000000..2fd51f2 --- /dev/null +++ b/tests/05r6tor0 @@ -0,0 +1,27 @@ +set -x -e + +# reshape a RAID6 to RAID5 and then RAID0. +# then reshape back up to RAID5 and RAID5 + +mdadm -CR $md0 -l6 -n5 $dev0 $dev1 $dev2 $dev3 $dev4 +check wait; sleep 1 +check raid6 +testdev $md0 3 19456 512 +mdadm -G $md0 -l5 +check wait; sleep 1 +check raid5 +testdev $md0 3 19456 512 +mdadm -G $md0 -l0 +check wait; sleep 1 +check raid0 +testdev $md0 3 19456 512 +mdadm -G $md0 -l5 --add $dev3 $dev4 +check wait; sleep 1 +check raid5 +check algorithm 2 +testdev $md0 3 19456 512 +mdadm -G $md0 -l 6 +check wait; sleep 1 +check raid6 +check algorithm 2 +testdev $md0 3 19456 512 diff --git a/tests/06name b/tests/06name new file mode 100644 index 0000000..4d5e824 --- /dev/null +++ b/tests/06name @@ -0,0 +1,12 @@ +set -x + +# create an array with a name + +mdadm -CR $md0 -l0 -n2 --metadata=1 --name="Fred" $dev0 $dev1 +mdadm -E $dev0 | grep 'Name : [^:]*:Fred ' > /dev/null || exit 1 +mdadm -D $md0 | grep 'Name : [^:]*:Fred ' > /dev/null || exit 1 +mdadm -S $md0 + +mdadm -A $md0 --name="Fred" $devlist +#mdadm -Db $md0 +mdadm -S $md0 diff --git a/tests/06sysfs b/tests/06sysfs new file mode 100644 index 0000000..af63ef4 --- /dev/null +++ b/tests/06sysfs @@ -0,0 +1,11 @@ +exit 0 +mdadm -CR $md0 -l1 -n3 $dev1 $dev2 $dev3 + +ls -Rl /sys/block/md0 + +cat /sys/block/md0/md/level +cat /sys/block/md0/md/raid_disks + +mdadm -S $md0 + +exit 1 diff --git a/tests/06wrmostly b/tests/06wrmostly new file mode 100644 index 0000000..968c197 --- /dev/null +++ b/tests/06wrmostly @@ -0,0 +1,13 @@ + +# create a raid1 array with a wrmostly device + +mdadm -CR $md0 -l1 -n3 $dev0 $dev1 --write-mostly $dev2 +testdev $md0 1 $mdsize1a 64 + +# unfortunately, we cannot measure if any read requests are going to $dev2 + +mdadm -S $md0 + +mdadm -CR $md0 -l1 -n3 --write-behind --bitmap=internal --bitmap-chunk=4 $dev0 $dev1 --write-mostly $dev2 +testdev $md0 1 $mdsize1a 64 +mdadm -S $md0 diff --git a/tests/07autoassemble b/tests/07autoassemble new file mode 100644 index 0000000..e689be7 --- /dev/null +++ b/tests/07autoassemble @@ -0,0 +1,24 @@ + +# create two raid1s, build a raid0 on top, then +# tear it down and get auto-assemble to rebuild it. + +mdadm -CR $md1 -l1 -n2 $dev0 $dev1 --homehost=testing +mdadm -CR $md2 -l1 -n2 $dev2 $dev3 --homehost=testing +mdadm -CR $md0 -l0 -n2 $md1 $md2 --homehost=testing + +mdadm -Ss +mdadm -As -c /dev/null --homehost=testing -vvv +testdev $md1 1 $mdsize1a 64 +testdev $md2 1 $mdsize1a 64 +testdev $md0 2 $mdsize11a 512 +mdadm -Ss + +mdadm --zero-superblock $dev0 $dev1 $dev2 $dev3 +## Now the raid0 uses one stacked and one not +mdadm -CR $md1 -l1 -n2 $dev0 $dev1 --homehost=testing +mdadm -CR $md0 -l0 -n2 $md1 $dev2 --homehost=testing +mdadm -Ss +mdadm -As -c /dev/null --homehost=testing -vvv +testdev $md1 1 $mdsize1a 64 +testdev $md0 1 $[mdsize1a+mdsize11a] 512 +mdadm -Ss diff --git a/tests/07autodetect b/tests/07autodetect new file mode 100644 index 0000000..917e0d6 --- /dev/null +++ b/tests/07autodetect @@ -0,0 +1,34 @@ + +# +# Test in-kernel autodetect. +# Create a partitionable array on each of two devices, +# put a partition on each, create an array, and see if we can +# use autodetect to restart the array. + +if lsmod | grep md_mod > /dev/null 2>&1 +then + echo md is a module - cannot test autodetect + exit 0 +fi + + +mdadm -CR -e 0 $mdp0 -l0 -f -n1 $dev0 +mdadm -CR -e 0 $mdp1 -l0 -f -n1 $dev1 +udevadm settle +sfdisk $mdp0 >&2 << END +,,FD +END +sfdisk $mdp1 >&2 << END +,,FD +END +udevadm settle +mdadm -CR -e 0 $md0 -l1 -n2 ${mdp0}p1 ${mdp1}p1 +check resync +check raid1 +check wait +mdadm -S $md0 +mdadm --auto-detect +check raid1 + +mdadm -Ss +exit 0 diff --git a/tests/07changelevelintr b/tests/07changelevelintr new file mode 100644 index 0000000..18c6309 --- /dev/null +++ b/tests/07changelevelintr @@ -0,0 +1,61 @@ + +# +# test that we can stop and restart a level change. +# just test a few in-place changes, and a few +# size-reducing changes. + + +checkgeo() { + # check the geometry of an array + # level raid_disks chunk_size layout + dev=$1 + shift + sleep 0.5 + check wait + sleep 1 + for attr in level raid_disks chunk_size layout + do + if [ $# -gt 0 ] ; then + val=$1 + shift + if [ " `cat /sys/block/$dev/md/$attr`" != " $val" ] + then echo "$attr doesn't match for $dev" + exit 1 + fi + fi + done +} + +restart() { + sleep 0.5 + check reshape + mdadm -S $md0 + mdadm -A $md0 $devs --backup-file=$bu + sleep 0.5 + check reshape +} + +bu=/tmp/md-backup +rm -f $bu +devs="$dev0 $dev1 $dev2 $dev3 $dev4" +mdadm -CR $md0 -l5 -n5 -c 256 $devs +checkgeo md0 raid5 5 $[256*1024] 2 + +mdadm -G $md0 -c 128 --backup-file=$bu +restart +checkgeo md0 raid5 5 $[128*1024] 2 + +mdadm -G $md0 --layout rs --backup-file=$bu +restart +checkgeo md0 raid5 5 $[128*1024] 3 + +mdadm -G $md0 --array-size 58368 +mdadm -G $md0 --raid-disks 4 -c 64 --backup-file=$bu +restart +checkgeo md0 raid5 4 $[64*1024] 3 + +devs="$dev0 $dev1 $dev2 $dev3" +mdadm -G $md0 --array-size 19456 +mdadm -G $md0 -n 2 -c 256 --backup-file=$bu +restart +checkgeo md0 raid5 2 $[256*1024] 3 diff --git a/tests/07changelevels b/tests/07changelevels new file mode 100644 index 0000000..a328874 --- /dev/null +++ b/tests/07changelevels @@ -0,0 +1,114 @@ + +# Test changing of level, chunksize etc. +# Create a RAID1, convert to RAID5, add a disk, add another disk +# convert to RAID6, back to RAID5 and ultimately to RAID1 + +testK=$[64*3*6] +dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$testK +export MDADM_GROW_VERIFY=1 + +dotest() { + sleep 2 + check wait + testdev $md0 $1 19968 64 nd + blockdev --flushbufs $md0 + cmp -s -n $[textK*1024] $md0 /tmp/RandFile || { echo cmp failed; exit 2; } + # write something new - shift chars 4 space + tr ' -~' '$-~ -#' < /tmp/RandFile > /tmp/RandFile2 + mv /tmp/RandFile2 /tmp/RandFile + dd if=/tmp/RandFile of=$md0 +} + +checkgeo() { + # check the geometry of an array + # level raid_disks chunk_size layout + dev=$1 + shift + sleep 0.5 + check wait + sleep 1 + for attr in level raid_disks chunk_size layout + do + if [ $# -gt 0 ] ; then + val=$1 + shift + if [ " `cat /sys/block/$dev/md/$attr`" != " $val" ] + then echo "$attr doesn't match for $dev" + exit 1 + fi + fi + done +} + + +bu=/tmp/md-test-backup +rm -f $bu +mdadm -CR $md0 -l1 -n2 -x1 $dev0 $dev1 $dev2 -z 19968 +testdev $md0 1 $mdsize1a 64 +dd if=/tmp/RandFile of=$md0 +dotest 1 + +mdadm --grow $md0 -l5 -n3 --chunk 64 +dotest 2 + +mdadm $md0 --add $dev3 $dev4 +mdadm --grow $md0 -n4 --chunk 32 +dotest 3 + +mdadm -G $md0 -l6 --backup-file $bu +dotest 3 + +mdadm -G /dev/md0 --array-size 39936 +mdadm -G $md0 -n4 --backup-file $bu +checkgeo md0 raid6 4 $[32*1024] +dotest 2 + +mdadm -G $md0 -l5 --backup-file $bu +checkgeo md0 raid5 3 $[32*1024] +dotest 2 + +mdadm -G /dev/md0 --array-size 19968 +mdadm -G $md0 -n2 --backup-file $bu +checkgeo md0 raid5 2 $[32*1024] +dotest 1 + +mdadm -G --level=1 $md0 +dotest 1 + +# now repeat that last few steps only with a degraded array. +mdadm -S $md0 +mdadm -CR $md0 -l6 -n5 $dev0 $dev1 $dev2 $dev3 $dev4 +dd if=/tmp/RandFile of=$md0 +dotest 3 + +mdadm $md0 --fail $dev0 + +mdadm -G /dev/md0 --array-size 37888 +mdadm -G $md0 -n4 --backup-file $bu +dotest 2 +checkgeo md0 raid6 4 $[512*1024] +mdadm $md0 --fail $dev4 + +mdadm $md0 --fail $dev3 +# now double-degraded. +# switch layout to a DDF layout and back to make sure that works. + +mdadm -G /dev/md0 --layout=ddf-N-continue --backup-file $bu +checkgeo md0 raid6 4 $[512*1024] 10 +dotest 2 +mdadm -G /dev/md0 --layout=ra --backup-file $bu +checkgeo md0 raid6 4 $[512*1024] 1 +dotest 2 + +mdadm -G $md0 -l5 --backup-file $bu +dotest 2 + +mdadm -G /dev/md0 --array-size 18944 +mdadm -G $md0 -n2 --backup-file $bu +dotest 1 +checkgeo md0 raid5 2 $[512*1024] +mdadm $md0 --fail $dev2 + +mdadm -G --level=1 $md0 +dotest 1 +checkgeo md0 raid1 2 diff --git a/tests/07layouts b/tests/07layouts new file mode 100644 index 0000000..acd1a80 --- /dev/null +++ b/tests/07layouts @@ -0,0 +1,91 @@ + +# check that kernel an restripe interpret all the different layouts +# the same +# This involves changing the layout to each different possibility +# while MDADM_GROW_VERIFY is set. + +testK=$[64*3*6] +dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$testK +export MDADM_GROW_VERITY=1 + + +dotest() { + sleep 0.5 + check wait + testdev $md0 $1 $mdsize1 512 nd + blockdev --flushbufs $md0 + cmp -s -n $[textK*1024] $md0 /tmp/RandFile || { echo cmp failed; exit 2; } + # write something new - shift chars 4 space + tr ' -~' '$-~ -#' < /tmp/RandFile > /tmp/RandFile2 + mv /tmp/RandFile2 /tmp/RandFile + dd if=/tmp/RandFile of=$md0 +} + +checkgeo() { + # check the geometry of an array + # level raid_disks chunk_size layout + dev=$1 + shift + sleep 0.5 + check wait + for attr in level raid_disks chunk_size layout + do + if [ $# -gt 0 ] ; then + val=$1 + shift + if [ " `sed 's/ .*//' /sys/block/$dev/md/$attr`" != " $val" ] + then echo "$attr doesn't match for $dev" + exit 1 + fi + fi + done +} + + +bu=/tmp/md-test-backup +rm -f $bu + +# first a degraded 5 device raid5 +mdadm -CR $md0 -l5 -n5 $dev0 $dev1 missing $dev2 $dev3 +dd if=/tmp/RandFile of=$md0 +dotest 4 + +l5[0]=la +l5[1]=ra +l5[2]=ls +l5[3]=rs +l5[4]=parity-first +l5[5]=parity-last +for layout in 0 1 2 3 4 5 0 +do + mdadm -G $md0 --layout=${l5[$layout]} --backup-file $bu + checkgeo md0 raid5 5 $[512*1024] $layout + dotest 4 +done + +mdadm -S $md0 +# now a doubly degraded raid6 +mdadm -CR $md0 -l6 -n5 $dev0 missing $dev2 missing $dev4 +dd if=/tmp/RandFile of=$md0 +dotest 3 + +l6[0]=la +l6[1]=ra +l6[2]=ls +l6[3]=rs +l6[4]=parity-first +l6[5]=parity-last +l6[8]=ddf-zero-restart +l6[9]=ddf-N-restart +l6[10]=ddf-N-continue +l6[16]=left-asymmetric-6 +l6[17]=right-asymmetric-6 +l6[18]=left-symmetric-6 +l6[19]=right-symmetric-6 +l6[20]=parity-first-6 +for layout in 0 1 2 3 4 5 8 9 10 16 17 18 19 20 0 +do + mdadm -G $md0 --layout=${l6[$layout]} --backup-file $bu + checkgeo md0 raid6 5 $[512*1024] $layout + dotest 3 +done diff --git a/tests/07reshape5intr b/tests/07reshape5intr new file mode 100644 index 0000000..0f4803a --- /dev/null +++ b/tests/07reshape5intr @@ -0,0 +1,41 @@ + +# +# test interrupting and restarting raid5 reshape. +set -x +devs="$dev1" +st=UU +for disks in 2 3 4 5 +do + eval devs=\"$devs \$dev$disks\" + st=U$st + for d in $devs + do dd if=/dev/urandom of=$d bs=1024 || true + done + + case $disks in + 2 | 3) chunk=1024;; + 4 ) chunk=512;; + 5 ) chunk=256;; + esac + + mdadm -CR $md0 -amd -l5 -c $chunk -n$disks --assume-clean $devs + mdadm $md0 --add $dev6 + echo 20 > /proc/sys/dev/raid/speed_limit_min + echo 20 > /proc/sys/dev/raid/speed_limit_max + mdadm --grow $md0 -n $[disks+1] + check reshape + check state $st + mdadm --stop $md0 + mdadm --assemble $md0 $devs $dev6 + check reshape + echo 1000 > /proc/sys/dev/raid/speed_limit_min + echo 2000 > /proc/sys/dev/raid/speed_limit_max + check wait + while ! echo check > /sys/block/md0/md/sync_action; do sleep 0.1; done + check wait + mm=`cat /sys/block/md0/md/mismatch_cnt` + if [ $mm -gt 0 ] + then echo >&2 "ERROR mismatch_cnt non-zero : $mm" ; exit 1 + fi + mdadm -S $md0 +done diff --git a/tests/07revert-grow b/tests/07revert-grow new file mode 100644 index 0000000..c8c4e85 --- /dev/null +++ b/tests/07revert-grow @@ -0,0 +1,52 @@ +set -e -x + +# revert a reshape that is increasing the number of devices, +# raid5, raid6, and raid10 + +# metadate 0.90 cannot handle RAID10 growth +# metadata 1.0 doesn't get a default headspace, is don't try it either. + +for metadata in 0.90 1.1 1.2 +do +# RAID5 +mdadm -CR --assume-clean $md0 -l5 -n4 -x1 $devlist4 --metadata=$metadata +check raid5 +testdev $md0 3 $mdsize1 512 +mdadm -G $md0 -n 5 +sleep 3 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=/tmp/md-backup +check wait +check raid5 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + +# RAID6 +mdadm -CR --assume-clean $md0 -l6 -n4 -x1 $devlist4 --metadata=$metadata +check raid6 +testdev $md0 2 $mdsize1 512 +mdadm -G $md0 -n 5 +sleep 3 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=/tmp/md-backup +check wait +check raid6 +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +if [ $metadata = 0.90 ]; then continue; fi + +# RAID10 +mdadm -CR --assume-clean $md0 -l10 -n4 -x1 $devlist4 --metadata=$metadata +check raid10 +testdev $md0 2 $mdsize1 512 +mdadm -G $md0 -n 5 +sleep 3 +mdadm -S $md0 +strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist4 +check wait +check raid10 +testdev $md0 2 $mdsize1 512 +mdadm -S $md0 + +done diff --git a/tests/07revert-inplace b/tests/07revert-inplace new file mode 100644 index 0000000..a73eb97 --- /dev/null +++ b/tests/07revert-inplace @@ -0,0 +1,44 @@ +set -e -x + +# revert a reshape that is not changing the number of data devices, +# raid5, raid6, and raid10 + +# RAID5 -> RAID6 +mdadm -CR --assume-clean $md0 -l5 -n4 -x1 $devlist4 +check raid5 +testdev $md0 3 $mdsize1 512 +mdadm -G $md0 -l 6 +sleep 2 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=/tmp/md-backup +check wait +check raid6 +check algorithm 18 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + +# RAID6 -> RAID5 +mdadm -CR --assume-clean $md0 -l6 -n5 $devlist4 +check raid6 +testdev $md0 3 $mdsize1 512 +mdadm -G $md0 -l 5 +sleep 2 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=/tmp/md-backup +check wait +check raid6 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + +# RAID10 - decrease chunk size +mdadm -CR --assume-clean $md0 -l10 -n6 -c 64 $devlist5 +check raid10 +testdev $md0 3 $mdsize1 64 +mdadm -G $md0 -c 32 +sleep 2 +mdadm -S $md0 +strace -o /tmp/str ./mdadm -A $md0 --update=revert-reshape $devlist5 +check wait +check raid10 +testdev $md0 3 $mdsize1 64 +mdadm -S $md0 diff --git a/tests/07revert-shrink b/tests/07revert-shrink new file mode 100644 index 0000000..62b5ae0 --- /dev/null +++ b/tests/07revert-shrink @@ -0,0 +1,56 @@ +set -e -x + +# revert a reshape that is decreasing the number of devices, +# raid5, raid6, and raid10 + +bu=$targetdir/md-backup +rm -f $bu +# RAID5 +mdadm -CR --assume-clean $md0 -l5 -n5 $devlist4 +check raid5 +testdev $md0 4 $mdsize1 512 +mdadm --grow $md0 --array-size 56832 +testdev $md0 3 $mdsize1 512 +mdadm -G $md0 -n 4 --backup=$bu +sleep 3 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=$bu +check wait +check raid5 +fsck -f -n $md0 +testdev $md0 4 $mdsize1 512 +mdadm -S $md0 + +#FIXME +rm -f $bu +# RAID6 +mdadm -CR --assume-clean $md0 -l6 -n5 $devlist4 +check raid6 +testdev $md0 3 $mdsize1 512 +mdadm --grow $md0 --array-size 37888 +testdev $md0 2 $mdsize1 512 +mdadm -G $md0 -n 4 --backup=$bu +sleep 2 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist4 --backup-file=$bu +check wait +check raid6 +fsck -f -n $md0 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 + +# RAID10 +mdadm -CR --assume-clean $md0 -l10 -n6 $devlist5 +check raid10 +testdev $md0 3 $mdsize1 512 +mdadm --grow $md0 --array-size 36864 +testdev $md0 2 $mdsize1 512 +mdadm -G $md0 -n 4 +sleep 3 +mdadm -S $md0 +mdadm -A $md0 --update=revert-reshape $devlist5 +check wait +check raid10 +fsck -f -n $md0 +testdev $md0 3 $mdsize1 512 +mdadm -S $md0 diff --git a/tests/07testreshape5 b/tests/07testreshape5 new file mode 100644 index 0000000..0e1f25f --- /dev/null +++ b/tests/07testreshape5 @@ -0,0 +1,45 @@ + +# +# test the reshape code by using test_reshape and the +# kernel md code to move data into and out of variously +# shaped md arrays. +set -x +layouts=(la ra ls rs) +for level in 5 6 +do +for chunk in 4 8 16 32 64 128 +do + devs="$dev1" + for disks in 2 3 4 5 6 + do + eval devs=\"$devs \$dev$disks\" + if [ " $level $disks" = " 6 3" -o " $level $disks" = " 6 2" ] + then continue + fi + for nlayout in 0 1 2 3 + do + layout=${layouts[$nlayout]} + + size=$[chunk*(disks-(level-4))*disks] + + # test restore: make a raid5 from a file, then do a compare + dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$size + $dir/test_stripe restore /tmp/RandFile $disks $[chunk*1024] $level $nlayout 0 $[size*1024] $devs + mdadm -CR -e 1.0 $md0 -amd -l$level -n$disks --assume-clean -c $chunk -p $layout $devs + cmp -s -n $[size*1024] $md0 /tmp/RandFile || { echo cmp failed ; exit 2; } + + # FIXME check parity + + # test save + dd if=/dev/urandom of=$md0 bs=1024 count=$size + blockdev --flushbufs $md0 $devs; sync + > /tmp/NewRand + $dir/test_stripe save /tmp/NewRand $disks $[chunk*1024] $level $nlayout 0 $[size*1024] $devs + cmp -s -n $[size*1024] $md0 /tmp/NewRand || { echo cmp failed ; exit 2; } + mdadm -S $md0 + udevadm settle + done + done +done +done +exit 0 diff --git a/tests/09imsm-assemble b/tests/09imsm-assemble new file mode 100644 index 0000000..d7028c6 --- /dev/null +++ b/tests/09imsm-assemble @@ -0,0 +1,73 @@ +# validate the prodigal member disk scenario i.e. a former container +# member is returned after having been rebuilt on another system + + +imsm_check_hold() { + if mdadm --remove $1 $2; then + echo "$2 removal from $1 should have been blocked" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +imsm_check_removal() { + if ! mdadm --remove $1 $2 ; then + echo "$2 removal from $1 should have succeeded" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +export IMSM_DEVNAME_AS_SERIAL=1 +export IMSM_TEST_OROM=1 +export IMSM_NO_PLATFORM=1 +container=/dev/md/container +member=/dev/md/vol0 + + +num_disks=4 +size=$((10*1024)) +mdadm -CR $container -e imsm -n $num_disks $dev0 $dev1 $dev2 $dev3 +mdadm -CR $member $dev0 $dev2 -n 2 -l 1 -z $size +mdadm --wait $member || true +mdadm -Ss + +# make dev0 and dev1 a new rebuild family +mdadm -A $container $dev0 $dev1 +mdadm -IR $container +mdadm --wait ${member}_0 || true +mdadm -Ss + +# make dev2 and dev3 a new rebuild family +mdadm -A $container $dev2 $dev3 +mdadm -IR $container +mdadm --wait ${member}_0 || true +mdadm -Ss + +# reassemble and make sure one of the families falls out +mdadm -A $container $dev0 $dev1 $dev2 $dev3 +mdadm -IR $container +testdev ${member}_0 1 $size 64 +if mdadm --remove $container $dev0 ; then + # the dev[23] family won + imsm_check_removal $container $dev1 + imsm_check_hold $container $dev2 + imsm_check_hold $container $dev3 +else + # the dev[01] family won + imsm_check_hold $container $dev1 + imsm_check_removal $container $dev2 + imsm_check_removal $container $dev3 +fi +mdadm -Ss + +# reassemble with a new id for the dev[23] family +mdadm -A $container $dev0 $dev1 +mdadm -IR $container +mdadm -A ${container}2 $dev2 $dev3 --update=uuid +mdadm -IR ${container}2 + +testdev ${member}_0 1 $size 64 +testdev ${member}_1 1 $size 64 diff --git a/tests/09imsm-create-fail-rebuild b/tests/09imsm-create-fail-rebuild new file mode 100644 index 0000000..f09b437 --- /dev/null +++ b/tests/09imsm-create-fail-rebuild @@ -0,0 +1,78 @@ +# sanity check array creation + +imsm_check_hold() { + if mdadm --remove $1 $2; then + echo "$2 removal from $1 should have been blocked" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +imsm_check_removal() { + if ! mdadm --remove $1 $2 ; then + echo "$2 removal from $1 should have succeeded" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +. tests/env-imsm-template + +# IMSM rounds to multiples of one mebibyte - 1024K +DEV_ROUND_K=1024 + +num_disks=2 +mdadm -CR $container -e imsm -n $num_disks $dev0 $dev1 +imsm_check container $num_disks + +# RAID0 + RAID1 +size=9000 +level=0 +chunk=64 +offset=0 +mdadm -CR $member0 $dev0 $dev1 -n $num_disks -l $level -z $size -c $chunk +imsm_check member $member0 $num_disks $level $size $((size*2)) $offset $chunk +testdev $member0 $num_disks $size $chunk + +offset=$(((size & ~(1024 - 1)) + 4096)) +size=4000 +level=1 +chunk=0 +mdadm -CR $member1 $dev0 $dev1 -n $num_disks -l $level -z $size +imsm_check member $member1 $num_disks $level $size $size $offset $chunk +testdev $member1 1 $size 64 +check wait + +mdadm -Ss + +# RAID10 + RAID5 +num_disks=4 +mdadm -CR $container -e imsm -n $num_disks $dev0 $dev1 $dev2 $dev3 +imsm_check container $num_disks + +size=9000 +level=10 +chunk=64 +offset=0 +mdadm -CR $member0 $dev0 $dev1 $dev2 $dev3 -n $num_disks -l $level -z $size -c $chunk +imsm_check member $member0 $num_disks $level $size $((size*2)) $offset $chunk +testdev $member0 $((num_disks-2)) $size $chunk + +offset=$(((size & ~(1024 - 1)) + 4096)) +size=4000 +level=5 +mdadm -CR $member1 $dev0 $dev1 $dev2 $dev3 -n $num_disks -l $level -z $size -c $chunk +imsm_check member $member1 $num_disks $level $size $((size*3)) $offset $chunk +testdev $member1 $((num_disks-1)) $size $chunk +check wait + +# FAIL / REBUILD +imsm_check_hold $container $dev0 +mdadm --fail $member0 $dev0 +mdadm --wait-clean --scan || true +imsm_check_removal $container $dev0 +mdadm --add $container $dev4 +check wait +imsm_check_hold $container $dev4 diff --git a/tests/09imsm-overlap b/tests/09imsm-overlap new file mode 100644 index 0000000..ff5d209 --- /dev/null +++ b/tests/09imsm-overlap @@ -0,0 +1,28 @@ + +. tests/env-imsm-template + +# create raid arrays with varying degress of overlap +mdadm -CR $container -e imsm -n 6 $dev0 $dev1 $dev2 $dev3 $dev4 $dev5 +imsm_check container 6 + +size=1024 +level=1 +num_disks=2 +mdadm -CR $member0 $dev0 $dev1 -n $num_disks -l $level -z $size +mdadm -CR $member1 $dev1 $dev2 -n $num_disks -l $level -z $size +mdadm -CR $member2 $dev2 $dev3 -n $num_disks -l $level -z $size +mdadm -CR $member3 $dev3 $dev4 -n $num_disks -l $level -z $size +mdadm -CR $member4 $dev4 $dev5 -n $num_disks -l $level -z $size + +udevadm settle + +offset=0 +imsm_check member $member0 $num_disks $level $size 1024 $offset +offset=$((offset+size+4096)) +imsm_check member $member1 $num_disks $level $size 1024 $offset +offset=$((offset+size+4096)) +imsm_check member $member2 $num_disks $level $size 1024 $offset +offset=$((offset+size+4096)) +imsm_check member $member3 $num_disks $level $size 1024 $offset +offset=$((offset+size+4096)) +imsm_check member $member4 $num_disks $level $size 1024 $offset diff --git a/tests/10ddf-assemble-missing b/tests/10ddf-assemble-missing new file mode 100644 index 0000000..4bf21b2 --- /dev/null +++ b/tests/10ddf-assemble-missing @@ -0,0 +1,61 @@ +# An array is assembled incompletely. +# Re missing disks get marked as missing and are not allowed back in + +. tests/env-ddf-template +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp /var/tmp/mdmon.log +ret=0 + +mdadm -CR $container -e ddf -n 4 $dev8 $dev9 $dev10 $dev11 +ddf_check container 4 + +mdadm -CR $member1 -n 4 -l 10 $dev8 $dev10 $dev9 $dev11 -z 10000 +mdadm -CR $member0 -n 2 -l 1 $dev8 $dev9 -z 10000 + +mdadm --wait $member0 || true +mdadm --wait $member1 || true + +mdadm -Ss +sleep 1 + +# Add all devices except those for $member0 +mdadm -I $dev10 +mdadm -I $dev11 + +# Start runnable members +mdadm -IRs || true +mdadm -Ss + +#[ -f /var/tmp/mdmon.log ] && cat /var/tmp/mdmon.log + +# Now reassemble +# This should work because BVDs weren't written to +for d in $dev8 $dev9 $dev10 $dev11; do + mdadm -I $d +done +mdadm -Ss + +# Expect consistent state +for d in $dev10 $dev11; do + mdadm -E $d>$tmp + egrep 'state\[0\] : Degraded, Consistent' $tmp || { + ret=1 + echo ERROR: $member0 has unexpected state on $d + } + egrep 'state\[1\] : Optimal, Consistent' $tmp || { + ret=1 + echo ERROR: $member1 has unexpected state on $d + } + + if [ x$(egrep -c 'active/Online$' $tmp) != x2 ]; then + ret=1 + echo ERROR: unexpected number of online disks on $d + fi +done + +if [ $ret -ne 0 ]; then + mdadm -E $dev10 + mdadm -E $dev8 +fi +rm -f $tmp /var/tmp/mdmon.log +[ $ret -eq 0 ] diff --git a/tests/10ddf-create b/tests/10ddf-create new file mode 100644 index 0000000..44e9544 --- /dev/null +++ b/tests/10ddf-create @@ -0,0 +1,89 @@ +# +# Test basic DDF functionality. +# +# Create a container with 5 drives +# create a small raid0 across them all, +# then a small raid10 using 4 drives, then a 2disk raid1 +# and a 3disk raid5 using the remaining space +# +# add some data, tear down the array, reassemble +# and make sure it is still there. +set -e +. tests/env-ddf-template +sda=$(get_rootdev) || exit 1 + +mdadm -CR /dev/md/ddf0 -e ddf -n 5 $dev8 $dev9 $dev10 $dev11 $dev12 +mdadm -CR r5 -l5 -n5 /dev/md/ddf0 -z 5000 +if mdadm -CR r5 -l1 -n2 /dev/md/ddf0 -z 5000 +then echo >&2 create with same name should fail ; exit 1 +fi +mdadm -CR r10 -l10 -n4 -pn2 /dev/md/ddf0 -z 5000 +mdadm -CR r1 -l1 -n2 /dev/md/ddf0 +mdadm -CR r0 -l0 -n3 /dev/md/ddf0 +testdev /dev/md/r5 4 5000 512 +testdev /dev/md/r10 2 5000 512 +# r0/r10 will use 4608 due to chunk size, so that leaves 23552 for the rest +testdev /dev/md/r1 1 23552 64 +testdev /dev/md/r0 3 23552 512 +dd if=$sda of=/dev/md/r0 || true +dd if=$sda of=/dev/md/r10 || true +dd if=$sda of=/dev/md/r1 || true +dd if=$sda of=/dev/md/r5 || true + +s0=`sha1sum /dev/md/r0` +s10=`sha1sum /dev/md/r10` +s1=`sha1sum /dev/md/r1` +s5=`sha1sum /dev/md/r5` + + +mdadm -Ss +mdadm -A /dev/md/ddf0 $dev8 $dev9 $dev10 $dev11 $dev12 +mdadm -I /dev/md/ddf0 + +udevadm settle +s0a=`sha1sum /dev/md/r0` +s10a=`sha1sum /dev/md/r10` +s1a=`sha1sum /dev/md/r1` +s5a=`sha1sum /dev/md/r5` + +if [ "$s0" != "$s0a" ]; then + echo r0 did not match ; exit 1; +fi +if [ "$s10" != "$s10a" ]; then + echo r10 did not match ; exit 1; +fi +if [ "$s1" != "$s1a" ]; then + echo r1 did not match ; exit 1; +fi +if [ "$s5" != "$s5a" ]; then + echo r5 did not match ; exit 1; +fi + +# failure status just means it has completed already, so ignore it. +mdadm --wait /dev/md/r1 || true +mdadm --wait /dev/md/r10 || true +mdadm --wait /dev/md/r5 || true + +mdadm -Dbs > /var/tmp/mdadm.conf + +mdadm -Ss + +# Now try to assemble using mdadm.conf +mdadm -Asc /var/tmp/mdadm.conf +check nosync # This failed once. The raid5 was resyncing. +udevadm settle +mdadm -Dbs | sort > /tmp/mdadm.conf +sort /var/tmp/mdadm.conf | diff /tmp/mdadm.conf - +mdadm -Ss + +# and now assemble fully incrementally. +for i in $dev8 $dev9 $dev10 $dev11 $dev12 +do + mdadm -I $i -c /var/tmp/mdadm.conf +done +check nosync +udevadm settle +mdadm -Dbs | sort > /tmp/mdadm.conf +sort /var/tmp/mdadm.conf | diff /tmp/mdadm.conf - +mdadm -Ss +rm /tmp/mdadm.conf /var/tmp/mdadm.conf diff --git a/tests/10ddf-create-fail-rebuild b/tests/10ddf-create-fail-rebuild new file mode 100644 index 0000000..a8e8ced --- /dev/null +++ b/tests/10ddf-create-fail-rebuild @@ -0,0 +1,77 @@ +# sanity check array creation + +ddf_check_hold() { + if mdadm --remove $1 $2; then + echo "$2 removal from $1 should have been blocked" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +ddf_check_removal() { + if ! mdadm --remove $1 $2 ; then + echo "$2 removal from $1 should have succeeded" >&2 + cat /proc/mdstat >&2 + mdadm -E $2 + exit 1 + fi +} + +. tests/env-ddf-template + +num_disks=2 +mdadm -CR $container -e ddf -n $num_disks $dev8 $dev9 +ddf_check container $num_disks + +# RAID0 + RAID1 +size=9000 +level=0 +chunk=64 +offset=0 +layout=0 +mdadm -CR $member0 $dev8 $dev9 -n $num_disks -l $level -z $size -c $chunk +ddf_check member $member0 $num_disks $level $size $((size*2)) $offset $chunk $layout +testdev $member0 $num_disks $size $chunk + +offset=$(((size & ~(chunk - 1)))) +size=4000 +level=1 +chunk=0 +mdadm -CR $member1 $dev8 $dev9 -n $num_disks -l $level -z $size +ddf_check member $member1 $num_disks $level $size $size $offset $chunk $layout +testdev $member1 1 $size 1 +check wait + +mdadm -Ss + +# RAID10 + RAID5 +num_disks=4 +mdadm -CR $container -e ddf -n $num_disks $dev8 $dev9 $dev10 $dev11 +ddf_check container $num_disks + +size=9000 +level=10 +chunk=64 +offset=0 +layout=2 +mdadm -CR $member0 $dev8 $dev9 $dev10 $dev11 -n $num_disks -l $level -z $size -c $chunk +ddf_check member $member0 $num_disks $level $size $((size*2)) $offset $chunk $layout +testdev $member0 $((num_disks-2)) $size $chunk + +offset=$(((size & ~(chunk - 1)))) +size=4000 +level=5 +mdadm -CR $member1 $dev8 $dev9 $dev10 $dev11 -n $num_disks -l $level -z $size -c $chunk +ddf_check member $member1 $num_disks $level $size $((size*3)) $offset $chunk $layout +testdev $member1 $((num_disks-1)) $size $chunk +check wait + +# FAIL / REBUILD +ddf_check_hold $container $dev8 +mdadm --fail $member0 $dev8 +mdadm --wait-clean --scan || true +ddf_check_removal $container $dev8 +mdadm --add $container $dev12 +check wait +ddf_check_hold $container $dev12 diff --git a/tests/10ddf-fail-create-race b/tests/10ddf-fail-create-race new file mode 100644 index 0000000..bd5dfb5 --- /dev/null +++ b/tests/10ddf-fail-create-race @@ -0,0 +1,66 @@ +# This test creates a RAID1, fails a disk, and immediately +# (simultaneously) creates a new array. This tests for a possible +# race where the meta data reflecting the disk failure may not +# be written when the 2nd array is created. +. tests/env-ddf-template + +mdadm --zero-superblock $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 + +mdadm -CR $container -e ddf -l container -n 2 $dev11 $dev12 +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container -z 10000 >/tmp/mdmon.txt 2>&1 +mdadm -CR $member0 -l raid1 -n 2 $container -z 10000 +check wait +fail0=$dev11 +mdadm --fail $member0 $fail0 & + +# The test can succeed two ways: +# 1) mdadm -C member1 fails - in this case the meta data +# was already on disk when the create attempt was made +# 2) mdadm -C succeeds in the first place (meta data not on disk yet), +# but mdmon detects the problem and sets the disk faulty. + +if mdadm -CR $member1 -l raid1 -n 2 $container; then + + echo create should have failed / race condition? + + check wait + set -- $(get_raiddisks $member0) + d0=$1 + ret=0 + if [ $1 = $fail0 -o $2 = $fail0 ]; then + ret=1 + else + set -- $(get_raiddisks $member1) + if [ $1 = $fail0 -o $2 = $fail0 ]; then + ret=1 + fi + fi + if [ $ret -eq 1 ]; then + echo ERROR: failed disk $fail0 is still a RAID member + echo $member0: $(get_raiddisks $member0) + echo $member1: $(get_raiddisks $member1) + fi + tmp=$(mktemp /tmp/mdest-XXXXXX) + mdadm -E $d0 >$tmp + if [ x$(grep -c 'state\[[01]\] : Degraded' $tmp) != x2 ]; then + echo ERROR: non-degraded array found + mdadm -E $d0 + ret=1 + fi + if ! grep -q '^ *0 *[0-9a-f]\{8\} .*Offline, Failed' $tmp; then + echo ERROR: disk 0 not marked as failed in meta data + mdadm -E $d0 + ret=1 + fi + rm -f $tmp +else + ret=0 +fi + +[ -f /tmp/mdmon.txt ] && { + cat /tmp/mdmon.txt + rm -f /tmp/mdmon.txt +} + +[ $ret -eq 0 ] + diff --git a/tests/10ddf-fail-readd b/tests/10ddf-fail-readd new file mode 100644 index 0000000..9cd7893 --- /dev/null +++ b/tests/10ddf-fail-readd @@ -0,0 +1,55 @@ +# Simple fail / re-add test +. tests/env-ddf-template + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp + +mdadm --zero-superblock $dev8 $dev9 +mdadm -CR $container -e ddf -l container -n 2 $dev8 $dev9 + +mdadm -CR $member0 -l raid1 -n 2 $container +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container >/tmp/mdmon.txt 2>&1 + +mke2fs -F $member0 +check wait + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm $member0 --fail $fail0 + +sleep 1 +mdadm $container --remove $fail0 + +set -- $(get_raiddisks $member0) +case $1 in MISSING) shift;; esac +good0=$1 + +# We re-add the disk now +mdadm $container --add $fail0 + +sleep 1 +mdadm --wait $member0 || true + +ret=0 +set -- $(get_raiddisks $member0) +case $1:$2 in + $dev8:$dev9|$dev9:$dev8);; + *) echo ERROR: bad raid disks "$@"; ret=1;; +esac + +mdadm -Ss +for x in $@; do + mdadm -E $x >$tmp + if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then + echo ERROR: member 0 should be optimal in meta data on $x + ret=1 + fi +done + +rm -f $tmp +if [ $ret -ne 0 ]; then + mdadm -E $dev8 + mdadm -E $dev9 +fi + +[ $ret -eq 0 ] diff --git a/tests/10ddf-fail-readd-readonly b/tests/10ddf-fail-readd-readonly new file mode 100644 index 0000000..6a74d9c --- /dev/null +++ b/tests/10ddf-fail-readd-readonly @@ -0,0 +1,71 @@ +# Simple fail / re-add test +. tests/env-ddf-template + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp + +mdadm --zero-superblock $dev8 $dev9 +mdadm -CR $container -e ddf -l container -n 2 $dev8 $dev9 + +mdadm -CR $member0 -l raid1 -n 2 $container +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container >/tmp/mdmon.txt 2>&1 + +check wait + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm $member0 --fail $fail0 + +sleep 1 +set -- $(get_raiddisks $member0) +case $1 in MISSING) shift;; esac +good0=$1 + +# Check that the meta data now show one disk as failed +ret=0 +for x in $@; do + mdadm -E $x >$tmp + if ! grep -q 'state\[0\] : Degraded, Consistent' $tmp; then + echo ERROR: member 0 should be degraded in meta data on $x + ret=1 + fi + phys=$(grep $x $tmp) + case $x:$phys in + $fail0:*active/Offline,\ Failed);; + $good0:*active/Online);; + *) echo ERROR: wrong phys disk state for $x + ret=1 + ;; + esac +done + +mdadm $container --remove $fail0 + +# We re-add the disk now +mdadm $container --add $fail0 + +sleep 1 +mdadm --wait $member0 || true + +set -- $(get_raiddisks $member0) +case $1:$2 in + $dev8:$dev9|$dev9:$dev8);; + *) echo ERROR: bad raid disks "$@"; ret=1;; +esac + +mdadm -Ss +for x in $@; do + mdadm -E $x >$tmp + if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then + echo ERROR: member 0 should be optimal in meta data on $x + ret=1 + fi +done + +rm -f $tmp +if [ $ret -ne 0 ]; then + mdadm -E $dev8 + mdadm -E $dev9 +fi + +[ $ret -eq 0 ] diff --git a/tests/10ddf-fail-spare b/tests/10ddf-fail-spare new file mode 100644 index 0000000..ab737ca --- /dev/null +++ b/tests/10ddf-fail-spare @@ -0,0 +1,86 @@ +# Test suggested by Albert Pauw: Create, fail one disk, have mdmon +# activate the spare, +# then run create again. Shouldn't use the failed disk for Create, +. tests/env-ddf-template + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp + +mdadm --zero-superblock $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 +mdadm -CR $container -e ddf -l container -n 5 $dev8 $dev9 $dev10 $dev11 $dev12 + +mdadm -CR $member0 -l raid1 -n 2 $container +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container >/tmp/mdmon.txt 2>&1 + +check wait + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm --fail $member0 $fail0 + +# To make sure the spare is activated, we may have to sleep +# 2s has always been enough for me +sleep 2 +check wait + +# This test can succeed both ways - if spare was activated +# before new array was created, we see only member 0. +# otherwise, we see both, adn member0 is degraded because the +# new array grabbed the spare +# which case occurs depends on the sleep time above. +ret=0 +if mdadm -CR $member1 -l raid5 -n 3 $container; then + # Creation successful - must have been quicker than spare activation + + check wait + set -- $(get_raiddisks $member1) + if [ $1 = $fail0 -o $2 = $fail0 -o $3 = $fail0 ]; then + echo ERROR: $member1 must not contain $fail0: $@ + ret=1 + fi + d1=$1 + mdadm -E $d1 >$tmp + if ! grep -q 'state\[1\] : Optimal, Consistent' $tmp; then + echo ERROR: member 1 should be optimal in meta data + ret=1 + fi + state0=Degraded +else + # Creation unsuccessful - spare was used for member 0 + state0=Optimal +fi + +# need to delay a little bit, sometimes the meta data aren't +# up-to-date yet +sleep 0.5 +set -- $(get_raiddisks $member0) +if [ $1 = $fail0 -o $2 = $fail0 ]; then + echo ERROR: $member0 must not contain $fail0: $@ + ret=1 +fi +d0=$1 + +[ -f $tmp ] || mdadm -E $d0 >$tmp + +if ! grep -q 'state\[0\] : '$state0', Consistent' $tmp; then + echo ERROR: member 0 should be $state0 in meta data + ret=1 +fi +if ! grep -q 'Offline, Failed' $tmp; then + echo ERROR: Failed disk expected in meta data + ret=1 +fi +if [ $ret -eq 1 ]; then + cat /proc/mdstat + mdadm -E $d0 + mdadm -E $d1 + mdadm -E $fail0 +fi + +[ -f /tmp/mdmon.txt ] && { + cat /tmp/mdmon.txt + rm -f /tmp/mdmon.txt +} + +rm -f $tmp +[ $ret -eq 0 ] diff --git a/tests/10ddf-fail-stop-readd b/tests/10ddf-fail-stop-readd new file mode 100644 index 0000000..f8ebe17 --- /dev/null +++ b/tests/10ddf-fail-stop-readd @@ -0,0 +1,66 @@ +# Simple fail / re-add test +. tests/env-ddf-template + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp + +mdadm --zero-superblock $dev8 $dev9 +mdadm -CR $container -e ddf -l container -n 2 $dev8 $dev9 + +mdadm -CR $member0 -l raid1 -n 2 $container +#$dir/mdadm -CR $member0 -l raid1 -n 2 $container >/tmp/mdmon.txt 2>&1 + +# Write to the array +mke2fs -F $member0 +check wait + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm $member0 --fail $fail0 + +sleep 1 +mdadm $container --remove $fail0 + +set -- $(get_raiddisks $member0) +case $1 in MISSING) shift;; esac +good0=$1 + +mdadm -Ss + +sleep 1 +# Now simulate incremental assembly +mdadm -I $good0 +mdadm -IRs || true + +# Write to the array +mke2fs -F $member0 + +# We re-add the disk now +mdadm $container --add $fail0 + +sleep 1 +mdadm --wait $member0 || true + +ret=0 +set -- $(get_raiddisks $member0) +case $1:$2 in + $dev8:$dev9|$dev9:$dev8);; + *) echo ERROR: bad raid disks "$@"; ret=1;; +esac + +mdadm -Ss +for x in $@; do + mdadm -E $x >$tmp + if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then + echo ERROR: member 0 should be optimal in meta data on $x + ret=1 + fi +done + +rm -f $tmp +if [ $ret -ne 0 ]; then + mdadm -E $dev8 + mdadm -E $dev9 +fi + +[ $ret -eq 0 ] diff --git a/tests/10ddf-fail-twice b/tests/10ddf-fail-twice new file mode 100644 index 0000000..6af1943 --- /dev/null +++ b/tests/10ddf-fail-twice @@ -0,0 +1,59 @@ +. tests/env-ddf-template + +num_disks=5 +mdadm -CR $container -e ddf -n $num_disks $dev8 $dev9 $dev10 $dev11 $dev12 +ddf_check container $num_disks + +mdadm -CR $member0 -n 2 -l 1 $container +mdadm -CR $member1 -n 3 -l 5 $container + +mdadm --wait $member1 $member0 || mdadm --wait $member1 $member0 || true + +set -- $(get_raiddisks $member0) +fail0=$1 +mdadm $member0 --fail $fail0 +set -- $(get_raiddisks $member1) +fail1=$1 +mdadm $member1 --fail $fail1 + +mdadm $container --add $dev13 + +mdadm --wait $member1 $member0 || mdadm --wait $member1 $member0 || true + + +devs0="$(get_raiddisks $member0)" +devs1="$(get_raiddisks $member1)" + +present=$(($(get_present $member0) + $(get_present $member1))) +[ $present -eq 4 ] || { + echo expected 4 present disks, got $present + devices for $member0: $devs0 + devices for $member1: $devs1 + exit 1 +} + +if echo "$devs0" | grep -q MISSING; then + good=1 + bad=0 +else + good=0 + bad=1 +fi + +# find a good device +eval "set -- \$devs$good" +check=$1 + +tmp=$(mktemp /tmp/mdtest-XXXXXX) +mdadm -E $check >$tmp + +{ grep -q 'state\['$bad'\] : Degraded, Consistent' $tmp && + grep -q 'state\['$good'\] : Optimal, Consistent' $tmp; } || { + echo unexpected meta data state on $check + mdadm -E $check + rm -f $tmp + exit 1 +} + +rm -f $tmp +exit 0 diff --git a/tests/10ddf-fail-two-spares b/tests/10ddf-fail-two-spares new file mode 100644 index 0000000..e00810d --- /dev/null +++ b/tests/10ddf-fail-two-spares @@ -0,0 +1,86 @@ +# Simulate two disks failing shorty after each other +. tests/env-ddf-template +sda=$(get_rootdev) || exit 1 +tmp=$(mktemp /tmp/mdtest-XXXXXX) + +mdadm --zero-superblock $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 +mdadm -CR $container -e ddf -l container -n 6 \ + $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 + +#fast_sync + +mdadm -CR $member0 -l raid6 -n 4 $dev10 $dev11 $dev12 $dev13 -z 16384 +#$dir/mdadm -CR $member0 -l raid6 -n 4 $dev10 $dev11 $dev12 $dev13 -z 16384 \ +# >/tmp/mdmon.txt 2>&1 +mdadm -CR $member1 -l raid10 -n 4 $dev10 $dev11 $dev12 $dev13 -z 16384 + +dd if=$sda of=$member0 bs=1M count=32 +dd if=$sda of=$member1 bs=1M skip=16 count=16 + +check wait + +sum0=$(sha1sum $member0) +sum1=$(sha1sum $member1) + +mdadm --fail $member1 $dev11 +sleep 1 +mdadm --fail $member1 $dev12 + +# We will have 4 resync procedures, 2 spares for 2 arrays. +mdadm --wait $member1 $member0 || true +mdadm --wait $member1 $member0 || true + +devs0="$(get_raiddisks $member0)" +devs1="$(get_raiddisks $member1)" +expected="$dev10 +$dev13 +$dev8 +$dev9" + +ret=0 +if [ "$(echo "$devs0" | sort)" != "$expected" \ + -o "$(echo "$devs1" | sort)" != "$expected" ]; then + echo ERROR: unexpected members + echo $member0: $devs0 + echo $member1: $devs1 + ret=1 +fi + +mdadm -E $dev10 >$tmp +if ! grep -q 'state\[0\] : Optimal, Consistent' $tmp; then + echo ERROR: $member0 should be optimal in meta data + ret=1 +fi +if ! grep -q 'state\[1\] : Optimal, Consistent' $tmp; then + echo ERROR: $member1 should be optimal in meta data + ret=1 +fi +if [ x"$(grep -c active/Online $tmp)" != x4 ]; then + echo ERROR: expected 4 online disks + ret=1 +fi +if [ x"$(grep -c "Offline, Failed" $tmp)" != x2 ]; then + echo ERROR: expected 2 failed disks + ret=1 +fi + +sum0a=$(sha1sum $member0) +sum1a=$(sha1sum $member1) + +if [ "$sum0" != "$sum0a" -o "$sum1" != "$sum1a" ]; then + echo ERROR: checksum mismatch + ret=1 +fi + +if [ $ret -eq 1 ]; then + cat /proc/mdstat + cat $tmp +fi + +[ -f /tmp/mdmon.txt ] && { + cat /tmp/mdmon.txt + rm -f /tmp/mdmon.txt +} +rm -f $tmp + +[ $ret -eq 0 ] diff --git a/tests/10ddf-geometry b/tests/10ddf-geometry new file mode 100644 index 0000000..b0cce2f --- /dev/null +++ b/tests/10ddf-geometry @@ -0,0 +1,82 @@ +# +# Test various RAID geometries, creation and deletion of subarrays +# + +assert_fail() { + if mdadm "$@"; then + echo mdadm "$@" must fail + return 1 + else + return 0 + fi +} + +assert_kill() { + local dev=$1 n=$2 + mdadm -S $dev + mdadm --kill-subarray=$n /dev/md/ddf0 + if mdadm -Dbs | grep -q $dev; then + echo >&2 $dev should be deleted + return 1 + fi + return 0 +} + +set -e +mdadm -CR /dev/md/ddf0 -e ddf -n 6 $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 + +# RAID1 geometries +# Use different sizes to make offset calculation harder +mdadm -CR l1s -l1 -n2 /dev/md/ddf0 -z 8000 +mdadm -CR l1m -l1 -n3 $dev8 $dev9 $dev10 -z 10000 +assert_fail -CR badl1 -l1 -n4 /dev/md/ddf0 + +# RAID10 geometries +mdadm -CR l10_0 -l10 -n3 /dev/md/ddf0 -z 1000 +mdadm -CR l10_1 -l10 -n5 /dev/md/ddf0 -z 1000 +assert_fail mdadm -CR badl10 -l10 -n4 -pn3 /dev/md/ddf0 +mdadm -CR l10_2 -l10 -n6 -pn2 /dev/md/ddf0 -z 4000 +mdadm -CR l10_3 -l10 -n6 -pn3 /dev/md/ddf0 -z 4000 + +assert_fail -CR l10_2 -l10 -n6 -pn2 /dev/md/ddf0 -z 5000 +assert_kill /dev/md/l10_2 4 +# gone now, must be able to create it again +mdadm -CR l10_2 -l10 -n6 -pn2 /dev/md/ddf0 -z 5000 + +# Now stop and reassemble +mdadm -Ss +mdadm -A /dev/md/ddf0 $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 + +# Same as above, on inactive container +assert_fail -CR l10_3 -l10 -n6 -pn2 /dev/md/ddf0 -z 5000 +# Kill subarray without having started anything (no mdmon) +mdadm --kill-subarray=5 /dev/md/ddf0 +mdadm -I /dev/md/ddf0 +mdadm -CR l10_3 -l10 -n6 -pn3 /dev/md/ddf0 -z 5000 + +assert_kill /dev/md/l10_2 4 +assert_kill /dev/md/l10_3 5 + +# RAID5 geometries +mdadm -CR l5la -l5 -n3 --layout=ddf-N-restart /dev/md/ddf0 -z 5000 +mdadm -CR l5ra -l5 -n3 --layout=ddf-zero-restart /dev/md/ddf0 -z 5000 +mdadm -CR l5ls -l5 -n3 --layout=ddf-N-continue /dev/md/ddf0 -z 5000 +assert_fail -CR l5rs -l5 -n3 -prs /dev/md/ddf0 -z 5000 + +# Stop and reassemble +mdadm -Ss +mdadm -A /dev/md/ddf0 $dev8 $dev9 $dev10 $dev11 $dev12 $dev13 +mdadm -I /dev/md/ddf0 + +assert_kill /dev/md/l5la 4 +assert_kill /dev/md/l5ls 6 +assert_kill /dev/md/l5ra 5 + +# RAID6 geometries +assert_fail -CR l6la -l6 -n3 -pla /dev/md/ddf0 -z 5000 +assert_fail -CR l6rs -l5 -n4 -prs /dev/md/ddf0 -z 5000 +mdadm -CR l6la -l6 -n4 --layout=ddf-N-restart /dev/md/ddf0 -z 5000 +mdadm -CR l6ra -l6 -n4 --layout=ddf-zero-restart $dev8 $dev9 $dev10 $dev11 -z 5000 +mdadm -CR l6ls -l6 -n4 --layout=ddf-N-continue $dev13 $dev8 $dev9 $dev12 -z 5000 + +mdadm -Ss diff --git a/tests/10ddf-incremental-wrong-order b/tests/10ddf-incremental-wrong-order new file mode 100644 index 0000000..9ecf6bc --- /dev/null +++ b/tests/10ddf-incremental-wrong-order @@ -0,0 +1,131 @@ +# An array is assembled incompletely. Some disks will +# have later metadata than others. +# The array is then reassembled in the "wrong" order - +# older meta data first. +# This FAILS with mdadm 3.3 +. tests/env-ddf-template +tmp=$(mktemp /tmp/mdtest-XXXXXX) +rm -f $tmp /var/tmp/mdmon.log +ret=0 + +mdadm -CR $container -e ddf -n 4 $dev8 $dev9 $dev10 $dev11 +ddf_check container 4 + +mdadm -CR $member1 -n 4 -l 10 $dev8 $dev10 $dev9 $dev11 -z 10000 +mdadm -CR $member0 -n 2 -l 1 $dev8 $dev9 -z 10000 + +mdadm --wait $member0 || true +mdadm --wait $member1 || true + +mke2fs -F $member0 +mke2fs -F $member1 +sha_0a=$(sha1_sum $member0) +sha_1a=$(sha1_sum $member1) + +mdadm -Ss +sleep 1 + +# Add all devices except those for $member0 +mdadm -I $dev10 +mdadm -I $dev11 + +# Start runnable members ($member1) and write +mdadm -IRs || true +e2fsck -fy $member1 +sha_1b=$(sha1_sum $member1) + +mdadm -Ss +sleep 1 + +# Seq number should be different now +seq8a=$(mdadm -E $dev8 | sed -n 's/^ *Seq : //p') +seq10a=$(mdadm -E $dev10 | sed -n 's/^ *Seq : //p') + +if [ $seq8a -ge $seq10a ]; then + ret=1 + echo ERROR: sequential number of $dev10 not bigger than $dev8 +fi +if [ x$sha_1a = x$sha_1b ]; then + ret=1 + echo ERROR: sha1sums equal after write +fi + +#[ -f /var/tmp/mdmon.log ] && cat /var/tmp/mdmon.log + +# Now reassemble +# Note that we add the previously missing disks first. +# $dev10 should have a higher seq number than $dev8 +for d in $dev8 $dev9 $dev10 $dev11; do + mdadm -I $d +done + +mdadm -IRs || true +sha_0c=$(sha1_sum $member0) +sha_1c=$(sha1_sum $member1) + +mdadm -Ss +sleep 1 + +seq8c=$(mdadm -E $dev8 | sed -n 's/^ *Seq : //p') +seq10c=$(mdadm -E $dev10 | sed -n 's/^ *Seq : //p') + +if [ x$sha_0a != x$sha_0c ]; then + ret=1 + echo ERROR: sha1sum of $member0 has changed +fi +if [ x$sha_1b != x$sha_1c ]; then + ret=1 + echo ERROR: sha1sum of $member1 has changed +fi +if [ \( $seq10a -ge $seq10c \) -o \( $seq8c -ne $seq10c \) ]; then + ret=1 + echo ERROR: sequential numbers are wrong +fi + +# Expect consistent state +for d in $dev10 $dev8; do + mdadm -E $d>$tmp + for x in 0 1; do + egrep 'state\['$x'\] : Optimal, Consistent' $tmp || { + ret=1 + echo ERROR: $member0 has unexpected state on $d + } + done + if [ x$(egrep -c 'active/Online$' $tmp) != x4 ]; then + ret=1 + echo ERROR: unexpected number of online disks on $d + fi +done + +# Now try assembly +if mdadm -A $container $dev8 $dev9 $dev10 $dev11; then + mdadm -IR $container + sha_0d=$(sha1_sum $member0) + sha_1d=$(sha1_sum $member1) + mdadm -Ss + sleep 1 + seq8d=$(mdadm -E $dev8 | sed -n 's/^ *Seq : //p') + seq10d=$(mdadm -E $dev10 | sed -n 's/^ *Seq : //p') + if [ x$sha_0a != x$sha_0d ]; then + ret=1 + echo ERROR: sha1sum of $member0 has changed + fi + if [ x$sha_1b != x$sha_1d ]; then + ret=1 + echo ERROR: sha1sum of $member1 has changed + fi + if [ \( $seq10a -ge $seq10d \) -o \( $seq8d -ne $seq10d \) ]; then + ret=1 + echo ERROR: sequential numbers are wrong + fi +else + ret=1 + echo ERROR: assembly failed +fi + +if [ $ret -ne 0 ]; then + mdadm -E $dev10 + mdadm -E $dev8 +fi +rm -f $tmp /var/tmp/mdmon.log +[ $ret -eq 0 ] diff --git a/tests/10ddf-sudden-degraded b/tests/10ddf-sudden-degraded new file mode 100644 index 0000000..dc692ae --- /dev/null +++ b/tests/10ddf-sudden-degraded @@ -0,0 +1,18 @@ +# +# An array is assembled with one device missing. +# The other device must be marked as Failed in metadata + +. tests/env-ddf-template + +mdadm -CR $container -e ddf -n 2 $dev8 $dev9 +ddf_check container 2 + +mdadm -CR $member1 -n 2 -l1 $dev8 $dev9 +mdadm --wait $member1 || true +mdadm -Ss + +mdadm -I $dev8 +mdadm -R $container +mkfs $member1 +# There must be a missing device recorded +mdadm --examine $dev8 | grep 'Raid Devices.*--' || exit 1 diff --git a/tests/11spare-migration b/tests/11spare-migration new file mode 100644 index 0000000..24b6ec6 --- /dev/null +++ b/tests/11spare-migration @@ -0,0 +1,454 @@ +# Set of tests for autorebuild functionality using mdadm -F +# To be able to test ddf one must have all loop devices of bigger size, with the ones +# above number 7 bigger again by any amount (this is not changed for now as it +# could affect other tests) + +export IMSM_DEVNAME_AS_SERIAL=1 +export IMSM_TEST_OROM=1 +export IMSM_NO_PLATFORM=1 + +. tests/utils +set -ex +verbose="yes" +sleeptime=10 + +# if listfailed=yes then don't exit if test failed due to wrong +# spare-migration and just print a list at the end. Other errors still +# stop the test. +# if listfailed=no then exit on first failure +listfailed="yes" + +# start Monitor, set monitorpid +# uses global scan variable +# all parameters are numbers of devices to be monitored. only used when $scan="no" +# eg. monitor 0 1 will start monitoring of containers c0, c1 and subarrays v0, v1 +monitor(){ + [ -z $monitorpid ] || return + if [ "$scan" == "yes" ]; then + $mdadm -F -d 1 --scan --mail root@localhost -c $config & + monitorpid=$! + return + fi + unset mddevs + while [ -n "$1" ] + do + eval container=\$c$1 + eval volumes=\$v$1 + mddevs="$mddevs /dev/$container" + if [ "$container" != "$volumes" ]; then + for vol in $volumes; do + mddevs="$mddevs /dev/$vol" + done + fi + shift + done + if [ -n "$mddevs" ]; then + if [ "$verbose" != "yes" ]; then + $mdadm -F -d 1 $mddevs -c $config >&2 & + monitorpid=$! + else + $mdadm -F -t -d 1 $mddevs -c $config & + monitorpid=$! + fi + fi + [ "$verbose" != "yes" ] || echo $mddevs $monitorpid +} + +test0() +{ +dsc "Test 0: No config file, no spare should be moved" +> $config +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v0 $dev0 +# check that spare loop2 was not moved from container c1 to container c0 +chksparemoved $c1 $c0 $dev2 n +tidyup +} + +test0a() +{ +dsc "Test 0a: No domains in config file, no spare should be moved" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v0 $dev0 +# check that spare loop2 was not moved from container c1 to container c0 +chksparemoved $c1 $c0 $dev2 n +tidyup +} + +test1() +{ +dsc "Test 1: Common domain, add disk to one container and fail first one in another container, spare should be moved" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +# create config file with arrays and common domain +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v0 $dev0 +# check that spare loop2 was moved from container c1 to container c0 +chksparemoved $c1 $c0 $dev2 +tidyup +} + +test1a() +{ +dsc "Test 1a: Common domain, add disk to one container and fail second one in another container, spare should be moved" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v0 $dev1 +# check that spare loop2 was moved from container c1 to container c0 +chksparemoved $c1 $c0 $dev2 +tidyup +} + +test2() +{ +dsc "Test 2: Common domain, fail disk in one container and add one to another container, spare should be moved" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 +monitor 0 1 +mdadm --fail /dev/$v0 $dev1 +mdadm -a /dev/$c1 $dev2 +chksparemoved $c1 $c0 $dev2 +tidyup +} + +test3() +{ +dsc "Test 3: Two domains, fail a disk in one domain, add a disk to another domain, the spare should not be moved" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +# create config file with 2 domains +createconfig a +createconfig domain-$platform"1" $platform spare 0 1 2 +createconfig domain-$platform"2" $platform spare 3 4 5 +monitor 0 1 +mdadm --fail /dev/$v0 $dev1 +mdadm -a /dev/$c1 $dev5 +chksparemoved $c1 $c0 $dev5 n +tidyup +} + +test4() +{ +dsc "Test 4: One domain holds one container, fail a disk in domain, and add disk to a container not described by domain, move if metadata allows" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 +monitor 0 1 +mdadm --fail /dev/$v0 $dev1 +mdadm -a /dev/$c1 $dev5 +unset shouldmove +[ "$platform" == "imsm" ] || shouldmove="n" +chksparemoved $c1 $c0 $dev5 $shouldmove +tidyup +} + +test5() +{ +dsc "Test 5: Two domains, two containers in each domain" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +setupdevs 2 5 6 $platform +setupdevs 3 8 10 $platform +# 2 and 9 for spares +createconfig a +createconfig domain-$platform"1" $platform spare 0 1 2 3 4 +createconfig domain-$platform"2" $platform spare 5 6 8 9 10 +monitor 0 1 2 3 +test5a +test5b +test5c +tidyup +} + +test5a() +{ +dsc "Test 5a: Two containers in each domain, add spare loop2 to domain1 and fail disk in the other domain, the spare should not be moved" +mdadm -a /dev/$c0 $dev2 +mdadm --fail /dev/$v2 $dev5 +chksparemoved $c0 $c2 $dev2 n +} + +test5b() +{ +dsc "Test 5b: Fail disk in the same domain but different container, spare loop2 should be moved" +mdadm --fail /dev/$v1 $dev3 +chksparemoved $c0 $c1 $dev2 +} + +test5c() +{ +dsc "Test 5c: Add spare loop9 to different container in domain with degraded array, spare should be moved" +mdadm -a /dev/$c3 $dev9 +chksparemoved $c3 $c2 $dev9 +} + +test6() +{ +dsc "Test 6: One domain has two containers, fail a disk in one container, there is a spare in other container too small to use for rebuild" +setupdevs 0 0 1 $platform +setupdevs 1 8 9 $platform +# all devices in one domain +createconfig a +createconfig domain-$platform $platform spare 0 1 2 8 9 +monitor 0 1 +mdadm -a /dev/$c0 $dev2 +mdadm --fail /dev/$v1 $dev8 +chksparemoved $c0 $c1 $dev2 n +tidyup +} + +test7() +{ +dsc "Test 7: One domain, add small spare to container, fail disk in array, spare not used, add suitable spare to other container, spare should be moved" +setupdevs 0 0 1 $platform +setupdevs 1 8 9 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 8 9 10 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v1 $dev8 +mdadm -a /dev/$c0 $dev10 +chksparemoved $c0 $c1 $dev10 +tidyup +} + + +test7a() +{ +dsc "Test 7a: Small spare in parent, suitable one in other container, $dev2 in $c1 is not in common domain" +setupdevs 0 0 1 $platform +setupdevs 1 8 9 $platform +#all $platform devices in one domain +createconfig a +createconfig domain-$platform"1" $platform spare 0 1 8 9 10 +createconfig domain-$platform"2" $platform spare 2 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +chkspare $c1 $dev2 +mdadm --fail /dev/$v1 $dev8 +mdadm -a /dev/$c0 $dev10 +chksparemoved $c0 $c1 $dev10 +tidyup +} + +test8() +{ +# ddf does not have getinfo_super_disks implemented so skip this test +return +dsc "Test 8: imsm and ddf - spare should not be migrated" +setupdevs 0 10 11 imsm +setupdevs 1 8 9 ddf +createconfig a +createconfig domain0 noplatform spare 8 9 10 11 12 +monitor 0 1 +mdadm -a /dev/$c1 $dev12 +mdadm --fail /dev/$v0 $dev10 +chksparemoved $c1 $c0 $dev12 n +tidyup +} + +test9() +{ +dsc "Test 9: imsm and native 1.2 - one domain, no metadata specified, spare should be moved" +setupdevs 0 10 11 imsm +setupdevs 1 8 9 1.2 +createconfig a +createconfig domain0 noplatform spare 8 9 10 11 12 +monitor 0 1 +mdadm -a /dev/$c1 $dev12 +mdadm --fail /dev/$v0 $dev10 +chksparemoved $c1 $c0 $dev12 +tidyup +} + +test9a() +{ +dsc "Test 9a: imsm and native 1.2 - spare in global domain, should be moved" +setupdevs 0 10 11 imsm +setupdevs 1 8 9 1.2 +createconfig a +createconfig domain-global noplatform spare 8 9 10 11 12 +createconfig domain-1.2 1.2 spare 8 9 +createconfig domain-imsm imsm spare 10 11 +monitor 0 1 +mdadm -a /dev/$c1 $dev12 +mdadm --fail /dev/$v0 $dev10 +chksparemoved $c1 $c0 $dev12 +tidyup +} + +test10() +{ +dsc "Test 10: Two arrays on the same devices in container" +setupdevs 0 0 1 $platform 10000 +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 5 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/md/sub0_ $dev0 +chksparemoved $c1 $c0 $dev2 +if [ $failed -eq 0 ]; then +# now fail the spare and see if we get another one + mdadm --fail /dev/md/sub0_ $dev2 + mdadm -a /dev/$c1 $dev5 + chksparemoved $c1 $c0 $dev5 +fi +tidyup +} + +test11() +{ +dsc "Test 11: Failed spare from other container should not be used" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v1 $dev3 +#wait until recovery finishes so no degraded array in c1 +check wait +mdadm --fail /dev/$v0 $dev0 +chksparemoved $c1 $c0 $dev3 n +tidyup +} + +test12() +{ +dsc "Test 12: Only one spare should be taken for rebuild, second not needed" +setupdevs 0 0 1 $platform +setupdevs 1 3 4 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 3 4 5 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm -a /dev/$c1 $dev5 +mdadm --fail /dev/$v0 $dev0 +sleep $sleeptime +chkarray $dev2 n +sc1=$c +chkarray $dev5 n +sc2=$c +[ "$sc1" != "$sc2" ] || err "both spares in the same container $sc1" +tidyup +} + +test13() +{ +dsc "Test 13: Common domain, two containers, fail a disk in container, action is below spare, the spare should be moved regadless of action" +setupdevs 0 0 1 $platform +setupdevs 1 4 5 $platform +# same domain but different action on 4 5 6 +createconfig a +createconfig domain-$platform $platform spare 0 1 +createconfig domain-$platform $platform include 4 5 6 +monitor 0 1 +mdadm -a /dev/$c1 $dev6 +mdadm --fail /dev/$v0 $dev0 +chksparemoved $c1 $c0 $d6 +tidyup +} + +test14() +{ +dsc "Test 14: One domain, small array on big disks, check if small spare is accepted" +setupdevs 0 8 9 $platform 10000 1 +setupdevs 1 0 1 $platform +createconfig a +createconfig domain-$platform $platform spare 0 1 2 8 9 +monitor 0 1 +mdadm -a /dev/$c1 $dev2 +mdadm --fail /dev/$v0 $dev9 +chksparemoved $c1 $c0 $d2 +tidyup +} + +test15() +{ +dsc "Test 15: spare in global domain for $platform metadata, should be moved" +# this is like 9a but only one metadata used +setupdevs 0 10 11 $platform +setupdevs 1 8 9 $platform +createconfig a +createconfig domain-global $platform spare 8 9 10 11 12 +createconfig domain-1 $platform spare 8 9 +createconfig domain-2 $platform spare 10 11 +monitor 0 1 +mdadm -a /dev/$c1 $dev12 +mdadm --fail /dev/$v0 $dev10 +chksparemoved $c1 $c0 $dev12 +tidyup +} + +try() +{ +test0 +test0a +test1 +test1a +test2 +test3 +test4 +test5 +test6 +if [ "$platform" != "1.2" ]; then +# this is because we can't have a small spare added to native array + test7 + test7a +fi +test8 +test9 +test9a +if [ "$platform" != "1.2" ]; then +# we can't create two subarrays on the same devices for native (without +# partitions) + test10 +fi +test11 +test12 +test13 +test14 +test15 +} + +try_failed() +{ +platform="1.2" +scan="no" +test5 +test9 +test13 +scan="yes" +test9 +} + +#try_failed + +for scan in no yes; do + for platform in 1.2 imsm; do + try + done +done + +[ $listfailed == "no" ] || [ -z $flist ] || echo -e "\n FAILED TESTS: $flist" + +#cat $targetdir/log +rm -f /dev/disk/by-path/loop* diff --git a/tests/12imsm-r0_2d-grow-r0_3d b/tests/12imsm-r0_2d-grow-r0_3d new file mode 100644 index 0000000..3c6cf74 --- /dev/null +++ b/tests/12imsm-r0_2d-grow-r0_3d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 0 volume, 2 disks grow to RAID 0 volume, 3 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2" + +# Before: RAID 0 volume, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 0 volume, 3 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/12imsm-r0_2d-grow-r0_4d b/tests/12imsm-r0_2d-grow-r0_4d new file mode 100644 index 0000000..e4fccda --- /dev/null +++ b/tests/12imsm-r0_2d-grow-r0_4d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 0 volume, 2 disks grow to RAID 0 volume, 4 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2 $dev3" + +# Before: RAID 0 volume, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 0 volume, 4 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 2)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/12imsm-r0_2d-grow-r0_5d b/tests/12imsm-r0_2d-grow-r0_5d new file mode 100644 index 0000000..388a5bb --- /dev/null +++ b/tests/12imsm-r0_2d-grow-r0_5d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 0 volume, 2 disks grow to RAID 0 volume, 5 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2 $dev3 $dev4" + +# Before: RAID 0 volume, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 0 volume, 5 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 3)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/12imsm-r0_3d-grow-r0_4d b/tests/12imsm-r0_3d-grow-r0_4d new file mode 100644 index 0000000..7065f07 --- /dev/null +++ b/tests/12imsm-r0_3d-grow-r0_4d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 0 volume, 3 disks grow to RAID 0 volume, 4 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 0 volume, 3 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 0 volume, 4 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/12imsm-r5_3d-grow-r5_4d b/tests/12imsm-r5_3d-grow-r5_4d new file mode 100644 index 0000000..097da0a --- /dev/null +++ b/tests/12imsm-r5_3d-grow-r5_4d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 5 volume, 3 disks grow to RAID 5 volume, 4 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 5 volume, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 5 volume, 4 disks, 64k chunk size +vol0_new_num_comps=$num_disks + +. tests/imsm-grow-template 0 0 diff --git a/tests/12imsm-r5_3d-grow-r5_5d b/tests/12imsm-r5_3d-grow-r5_5d new file mode 100644 index 0000000..2e5c7d2 --- /dev/null +++ b/tests/12imsm-r5_3d-grow-r5_5d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 5 volume, 3 disks grow to RAID 5 volume, 5 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3 $dev4" + +# Before: RAID 5 volume, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 5 volume, 5 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r0_r0_2d-grow-r0_r0_4d b/tests/13imsm-r0_r0_2d-grow-r0_r0_4d new file mode 100644 index 0000000..66ceeb3 --- /dev/null +++ b/tests/13imsm-r0_r0_2d-grow-r0_r0_4d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow the container (arrays inside) from 2 disks to 4 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2 $dev3" + +# Before: RAID 0 volume in slot #0, 2 disks, 128k chunk size +# RAID 0 volume in slot #1, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$num_disks +vol0_offset=0 + +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_num_comps=$num_disks +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID 0 volume in slot #0, 4 disks, 128k chunk size +# RAID 0 volume in slot #1, 4 disks, 64k chunk size +vol0_new_num_comps=$((num_disks + 2)) +vol1_new_num_comps=$vol0_new_num_comps + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r0_r0_2d-grow-r0_r0_5d b/tests/13imsm-r0_r0_2d-grow-r0_r0_5d new file mode 100644 index 0000000..0da9ef3 --- /dev/null +++ b/tests/13imsm-r0_r0_2d-grow-r0_r0_5d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow both members from 2 disks to 5 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2 $dev3 $dev4" + +# Before: RAID 0 volume in slot #0, 2 disks, 64k chunk size +# RAID 0 volume in slot #1, 2 disks, 256k chunk size +vol0_level=0 +vol0_comp_size=$((4 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +vol1_level=0 +vol1_comp_size=$((6 * 1024)) +vol1_chunk=256 +vol1_num_comps=$num_disks +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID 0 volume in slot #0, 5 disks, 64k chunk size +# RAID 0 volume in slot #1, 5 disks, 256k chunk size +vol0_new_num_comps=$((num_disks + 3)) +vol1_new_num_comps=$vol0_new_num_comps + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r0_r0_3d-grow-r0_r0_4d b/tests/13imsm-r0_r0_3d-grow-r0_r0_4d new file mode 100644 index 0000000..1ff6025 --- /dev/null +++ b/tests/13imsm-r0_r0_3d-grow-r0_r0_4d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow a container (arrays inside) from 3 disks to 4 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 0 volume in slot #0, 3 disks, 128k chunk size +# RAID 0 volume in slot #1, 3 disks, 512k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$num_disks +vol0_offset=0 + +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=128 +vol1_num_comps=$num_disks +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID0 volume in slot #0, 4 disks, 128k chunk size +# RAID0 volume in slot #1, 4 disks, 512k chunk size +vol0_new_num_comps=$((num_disks + 1)) +vol1_new_num_comps=$vol0_new_num_comps + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r0_r5_3d-grow-r0_r5_4d b/tests/13imsm-r0_r5_3d-grow-r0_r5_4d new file mode 100644 index 0000000..2977f36 --- /dev/null +++ b/tests/13imsm-r0_r5_3d-grow-r0_r5_4d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow the container (arrays inside) from 3 disks to 4 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 0 volume in slot #0, 3 disks, 64k chunk size +# RAID 5 volume in slot #1, 3 disks, 128k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +vol1_level=5 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=128 +vol1_num_comps=$((num_disks - 1)) +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID 0 volume in slot #0, 4 disks, 64k chunk size +# RAID 5 volume in slot #1, 4 disks, 128k chunk size +vol1_new_num_comps=$num_disks +vol0_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r0_r5_3d-grow-r0_r5_5d b/tests/13imsm-r0_r5_3d-grow-r0_r5_5d new file mode 100644 index 0000000..ff15ad0 --- /dev/null +++ b/tests/13imsm-r0_r5_3d-grow-r0_r5_5d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow the container (arrays inside) from 3 disks to 5 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3 $dev4" + +# Before: RAID 0 volume in slot #0, 3 disks, 256k chunk size +# RAID 5 volume in slot #1, 3 disks, 512k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$num_disks +vol0_offset=0 + +vol1_level=5 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=128 +vol1_num_comps=$((num_disks - 1)) +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID 0 volume in slot #0, 5 disks, 256k chunk size +# RAID 5 volume in slot #1, 5 disks, 512k chunk size +vol0_new_num_comps=$((num_disks + 2)) +vol1_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r5_r0_3d-grow-r5_r0_4d b/tests/13imsm-r5_r0_3d-grow-r5_r0_4d new file mode 100644 index 0000000..9fed88a --- /dev/null +++ b/tests/13imsm-r5_r0_3d-grow-r5_r0_4d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow the container (arrays inside) from 3 disks to 4 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 5 volume in slot #0, 3 disks, 64k chunk size +# RAID 0 volume in slot #1, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_offset=$((vol0_comp_size + 4096)) +vol1_num_comps=$num_disks + +# After: RAID 5 volume in slot #0, 4 disks, 64k chunk size +# RAID 0 volume in slot #1, 4 disks, 64k chunk size +vol0_new_num_comps=$num_disks +vol1_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/13imsm-r5_r0_3d-grow-r5_r0_5d b/tests/13imsm-r5_r0_3d-grow-r5_r0_5d new file mode 100644 index 0000000..e8beddc --- /dev/null +++ b/tests/13imsm-r5_r0_3d-grow-r5_r0_5d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# Grow the container (arrays inside) from 3 disks to 5 disks +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3 $dev4" + +# Before: RAID 5 volume in slot #0, 3 disks, 128k chunk size +# RAID 0 volume in slot #1, 3 disks, 256k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_offset=$((vol0_comp_size + 4096)) +vol1_num_comps=$num_disks + +# After: RAID 5 volume in slot #0, 5 disks, 128k chunk size +# RAID 0 volume in slot #1, 5 disks, 256k chunk size +vol0_new_num_comps=$((num_disks + 1)) +vol1_new_num_comps=$((num_disks + 2)) + +. tests/imsm-grow-template 0 0 diff --git a/tests/14imsm-r0_3d-r5_3d-migrate-r5_4d-r5_4d b/tests/14imsm-r0_3d-r5_3d-migrate-r5_4d-r5_4d new file mode 100644 index 0000000..cb7328a --- /dev/null +++ b/tests/14imsm-r0_3d-r5_3d-migrate-r5_4d-r5_4d @@ -0,0 +1,29 @@ +. tests/env-imsm-template + +# RAID 0 and RAID 5 volumes (3 disks) migrate to RAID 5 and RAID 5 volumes (4 disks) +# NEGATIVE test - migration is not allowed if there is more then one array in a container + +num_disks=3 +device_list="$dev0 $dev1 $dev2" +spare_list="$dev3" + +# Before: RAID 0 volume, 3 disks, 64k chunk size, as member #0 +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# Extra: RAID 5 volume, 3 disks, 64k chunk size, as member #1 +vol1_level=5 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_num_comps=$((num_disks - 1)) +vol1_offset=$((vol0_comp_size + 4096)) + +# After: RAID 5 volume, 4 disks, 64k chunk size (only member #0) +vol0_new_level=5 +vol0_new_num_comps=$num_disks +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 1 diff --git a/tests/14imsm-r0_3d_no_spares-migrate-r5_3d b/tests/14imsm-r0_3d_no_spares-migrate-r5_3d new file mode 100644 index 0000000..10bbab6 --- /dev/null +++ b/tests/14imsm-r0_3d_no_spares-migrate-r5_3d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 0 volume (3 disks, no spares) migrate to RAID 5 volume (3 disks) +# NEGATIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# Before: RAID 0 volume, 3 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 5, 3 disks, 64k chunk size +vol0_new_level=5 +vol0_new_num_comps=$((num_disks - 1)) +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 diff --git a/tests/14imsm-r0_r0_2d-takeover-r10_4d b/tests/14imsm-r0_r0_2d-takeover-r10_4d new file mode 100644 index 0000000..d068abb --- /dev/null +++ b/tests/14imsm-r0_r0_2d-takeover-r10_4d @@ -0,0 +1,30 @@ +. tests/env-imsm-template + + +# Two RAID 0 volumes (2 disks) migrate to RAID 10 volume (4 disks) +# NEGATIVE test + +num_disks=2 +device_list="$dev0 $dev1" + +# Before: RAID 0 volume in slot #0, 2 disks, 64k chunk size +# RAID 0 volume in slot #1, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# Before: RAID 0 volume, disks, 64k chunk size +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_num_comps=num_disks +vol1_offset=$(( $vol0_comp_size + 4096 )) + +# After: RAID 10, 4 disks, 64k chunk size +vol0_new_level=10 +vol0_new_num_comps=$((num_disks - 1)) +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 1 diff --git a/tests/14imsm-r10_4d-grow-r10_5d b/tests/14imsm-r10_4d-grow-r10_5d new file mode 100644 index 0000000..bcbe147 --- /dev/null +++ b/tests/14imsm-r10_4d-grow-r10_5d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 10 volume, 4 disks grow to RAID 10 volume, 5 disks +# NEGATIVE test + +num_disks=4 +device_list="$dev0 $dev1 $dev2 $dev3" +spare_list="$dev4" + +# Before: RAID 10 volume, 4 disks, 128k chunk size +vol0_level=10 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$((num_disks - 2)) +vol0_offset=0 + +# After: RAID 10 volume, 5 disks, 128k chunks size (test should fail) +vol0_new_num_comps=$((num_disks + 1)) + +. tests/imsm-grow-template 1 0 diff --git a/tests/14imsm-r10_r5_4d-takeover-r0_2d b/tests/14imsm-r10_r5_4d-takeover-r0_2d new file mode 100644 index 0000000..720e575 --- /dev/null +++ b/tests/14imsm-r10_r5_4d-takeover-r0_2d @@ -0,0 +1,30 @@ +. tests/env-imsm-template + + +# Two RAID volumes: RAID10 and RAID5 (4 disks) migrate to RAID 0 volume (2 disks) +# NEGATIVE test + +num_disks=4 +device_list="$dev0 $dev1 $dev2 $dev3" + +# Before: RAID 10 volume in slot #0, 4 disks, 64k chunk size +# RAID 5 volume in slot #1, 4 disks, 64k chunk size +vol0_level=10 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$(( $num_disks - 2 )) +vol0_offset=0 + +# Before: RAID 0 volume, disks, 64k chunk size +vol1_level=5 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_num_comps=$(( $num_disks - 1 )) +vol1_offset=$(( $vol0_comp_size + 4096 )) + +# After: RAID 10, 4 disks, 64k chunk size +vol0_new_level=0 +vol0_new_num_comps=2 +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 1 diff --git a/tests/14imsm-r1_2d-grow-r1_3d b/tests/14imsm-r1_2d-grow-r1_3d new file mode 100644 index 0000000..be20ab8 --- /dev/null +++ b/tests/14imsm-r1_2d-grow-r1_3d @@ -0,0 +1,19 @@ +. tests/env-imsm-template + +# RAID 1 volume, 2 disks grow to RAID 1 volume, 3 disks +# NEGATIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev4" + +# Before: RAID 1 volume, 2 disks, 64k chunk size +vol0_level=1 +vol0_comp_size=$((5 * 1024)) +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 1 volume, 3 disks, 64k chunks size (test should fail) +vol0_new_num_comps=$num_disks + +. tests/imsm-grow-template 1 0 diff --git a/tests/14imsm-r1_2d-takeover-r0_2d b/tests/14imsm-r1_2d-takeover-r0_2d new file mode 100644 index 0000000..27002e1 --- /dev/null +++ b/tests/14imsm-r1_2d-takeover-r0_2d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 1 volume, 2 disks change to RAID 0 volume, 2 disks +# +#NEGATIVE test + +num_disks=2 +device_list="$dev0 $dev1" + +# Before: RAID 1 volume, 2 disks, 64k chunk size +vol0_level=1 +vol0_comp_size=$((5 * 1024)) +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 0 volume, 2 disks, 64k chunk size +vol0_new_level=0 +vol0_new_num_comps=$num_disks +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 diff --git a/tests/14imsm-r5_3d-grow-r5_5d-no-spares b/tests/14imsm-r5_3d-grow-r5_5d-no-spares new file mode 100644 index 0000000..ed18e72 --- /dev/null +++ b/tests/14imsm-r5_3d-grow-r5_5d-no-spares @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# RAID 5 volume, 3 disks grow to RAID 5 volume, 4 disks +# NEGATIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# Before: RAID 5 volume, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 5 volume, 4 disks, 64k chunks size +add_to_num_disks=2 +vol0_new_num_comps=$((num_disks + 2)) + +. tests/imsm-grow-template 1 0 diff --git a/tests/14imsm-r5_3d-migrate-r4_3d b/tests/14imsm-r5_3d-migrate-r4_3d new file mode 100644 index 0000000..e3b971c --- /dev/null +++ b/tests/14imsm-r5_3d-migrate-r4_3d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume (3 disks) migrate to RAID 4 volume (3 disks) +# NEGATIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# Before: RAID 5 volume, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 4, 3 disks, 64k chunk size +vol0_new_level=4 +vol0_new_num_comps=$((num_disks - 1)) +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 diff --git a/tests/15imsm-r0_3d_64k-migrate-r0_3d_256k b/tests/15imsm-r0_3d_64k-migrate-r0_3d_256k new file mode 100644 index 0000000..4fe3807 --- /dev/null +++ b/tests/15imsm-r0_3d_64k-migrate-r0_3d_256k @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 0 volume, Migration from 64k to 256k chunk size. +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" + +# RAID 0, 2 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# RAID 0, 2 disks, 256k chunk size +vol0_new_level=0 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=256 + +. tests/imsm-grow-template 0 1 diff --git a/tests/15imsm-r5_3d_4k-migrate-r5_3d_256k b/tests/15imsm-r5_3d_4k-migrate-r5_3d_256k new file mode 100644 index 0000000..025e9ef --- /dev/null +++ b/tests/15imsm-r5_3d_4k-migrate-r5_3d_256k @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume, Migration from 4k to 256 chunk size. +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# RAID 5, 3 disks, 4k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=4 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# RAID 5, 3 disks, 256k chunk size +vol0_new_level=5 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=256 + +. tests/imsm-grow-template 0 1 diff --git a/tests/15imsm-r5_3d_64k-migrate-r5_3d_256k b/tests/15imsm-r5_3d_64k-migrate-r5_3d_256k new file mode 100644 index 0000000..37547b7 --- /dev/null +++ b/tests/15imsm-r5_3d_64k-migrate-r5_3d_256k @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume, Migration from 64k to 256k chunk size. +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# RAID 5, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# RAID 5, 3 disks, 256k chunk size +vol0_new_level=5 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=256 + +. tests/imsm-grow-template 0 1 diff --git a/tests/15imsm-r5_6d_4k-migrate-r5_6d_256k b/tests/15imsm-r5_6d_4k-migrate-r5_6d_256k new file mode 100644 index 0000000..d2f6c70 --- /dev/null +++ b/tests/15imsm-r5_6d_4k-migrate-r5_6d_256k @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume, Migration from 4k to 256k chunk size. +# POSITIVE test + +num_disks=6 +device_list="$dev0 $dev1 $dev2 $dev3 $dev4 $dev5" + +# RAID 5, 6 disks, 4k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=4 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# RAID 5, 6 disks, 256k chunk size +vol0_new_level=5 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=256 + +. tests/imsm-grow-template 0 1 diff --git a/tests/15imsm-r5_r0_3d_64k-migrate-r5_r0_3d_256k b/tests/15imsm-r5_r0_3d_64k-migrate-r5_r0_3d_256k new file mode 100644 index 0000000..f9369d5 --- /dev/null +++ b/tests/15imsm-r5_r0_3d_64k-migrate-r5_r0_3d_256k @@ -0,0 +1,34 @@ +. tests/env-imsm-template + +# Member 0: RAID 5 volume, Member 1: RAID 0 volume +# Migration from 64k to 256k chunk size (both members) +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# RAID 5, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After migration parameters +vol0_new_level=5 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=256 + +# RAID 0, 3 disks, 64k chunk size +vol1_level=0 +vol1_comp_size=$((5 * 1024)) +vol1_chunk=64 +vol1_num_comps=$num_disks +vol1_offset=$((vol0_comp_size + 4096)) + +# After migration paramters +vol1_new_level=0 +vol1_new_num_comps=$vol1_num_comps +vol1_new_chunk=256 + +. tests/imsm-grow-template 0 1 diff --git a/tests/16imsm-r0_3d-migrate-r5_4d b/tests/16imsm-r0_3d-migrate-r5_4d new file mode 100644 index 0000000..265adf9 --- /dev/null +++ b/tests/16imsm-r0_3d-migrate-r5_4d @@ -0,0 +1,22 @@ +. tests/env-imsm-template + +# RAID 0 volume (3 disks) migrate to RAID 5 volume (4 disks) +# POSITIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# Before: RAID 0, 3 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 5, 4 disks, 64k chunk size +vol0_new_level=5 +new_num_disks=4 +vol0_new_num_comps=$num_disks +vol0_new_chunk=64 + +. tests/imsm-grow-template 0 1 diff --git a/tests/16imsm-r0_5d-migrate-r5_6d b/tests/16imsm-r0_5d-migrate-r5_6d new file mode 100644 index 0000000..535b609 --- /dev/null +++ b/tests/16imsm-r0_5d-migrate-r5_6d @@ -0,0 +1,22 @@ +. tests/env-imsm-template + +# RAID 0 volume (5 disks) migrate to RAID 5 volume (6 disks) +# POSITIVE test + +num_disks=5 +device_list="$dev0 $dev1 $dev2 $dev3 $dev4" + +# Before: RAID 0, 5 disks, 64k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 5, 6 disks, 64k chunk size +vol0_new_level=5 +vol0_new_num_comps=$num_disks +vol0_new_chunk=64 +new_num_disks=6 + +. tests/imsm-grow-template 0 1 diff --git a/tests/16imsm-r5_3d-migrate-r0_3d b/tests/16imsm-r5_3d-migrate-r0_3d new file mode 100644 index 0000000..bcb5709 --- /dev/null +++ b/tests/16imsm-r5_3d-migrate-r0_3d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume (3 disks) migrate to RAID 0 volume (2 disks) +# NEGATIVE test + +num_disks=3 +device_list="$dev0 $dev1 $dev2" + +# Before: RAID 5, 3 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 0, 3 disks, 64k chunk size +vol0_new_level=0 +vol0_new_num_comps=$((num_disks-1)) +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 1 diff --git a/tests/16imsm-r5_5d-migrate-r0_5d b/tests/16imsm-r5_5d-migrate-r0_5d new file mode 100644 index 0000000..ca77435 --- /dev/null +++ b/tests/16imsm-r5_5d-migrate-r0_5d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 5 volume (5 disks) migration to RAID 0 volume (4 disks) +# NEGATIVE test + +num_disks=5 +device_list="$dev0 $dev1 $dev2 $dev3 $dev4" + +# Before: RAID 5 volume, 5 disks, 64k chunk size +vol0_level=5 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=64 +vol0_num_comps=$((num_disks - 1)) +vol0_offset=0 + +# After: RAID 0 volume, 5 disks, 64k chunk size +vol0_new_level=0 +vol0_new_num_comps=$((num_disks - 1)) +vol0_new_chunk=64 + +. tests/imsm-grow-template 1 1 diff --git a/tests/18imsm-1d-takeover-r0_1d b/tests/18imsm-1d-takeover-r0_1d new file mode 100644 index 0000000..6f5cf5a --- /dev/null +++ b/tests/18imsm-1d-takeover-r0_1d @@ -0,0 +1,22 @@ +. tests/env-imsm-template + +# Create RAID 0 from a single disk. +# POSITIVE test + +vol0_num_comps=1 +vol0_comp_size=$((10 * 1024)) + +# Create container +mdadm --create --run $container --auto=md --metadata=imsm --force --raid-disks=$vol0_num_comps $dev0 +check wait +imsm_check container $vol0_num_comps + +# Create RAID 0 volume +mdadm --create --run $member0 --auto=md --level=0 --size=$vol0_comp_size --chunk=64 --force --raid-disks=$vol0_num_comps $dev0 +check wait + +# Test the member +imsm_check member $member0 $vol0_num_comps 0 $vol0_comp_size $((vol0_num_comps * vol0_comp_size)) 0 64 +testdev $member0 $vol0_num_comps $vol0_comp_size 64 + +exit 0 diff --git a/tests/18imsm-1d-takeover-r1_2d b/tests/18imsm-1d-takeover-r1_2d new file mode 100644 index 0000000..e38ed89 --- /dev/null +++ b/tests/18imsm-1d-takeover-r1_2d @@ -0,0 +1,20 @@ +. tests/env-imsm-template + +# Create RAID 1 from a single disk +# POSITIVE test + +vol0_num_comps=1 +vol0_comp_size=$((10 * 1024)) + +# Create container +mdadm --create --run $container --auto=md --metadata=imsm --force --raid-disks=$vol0_num_comps $dev0 +check wait +imsm_check container $vol0_num_comps + +# Create RAID 1 volume +mdadm --create --run $member0 --auto=md --level=1 --size=$vol0_comp_size --raid-disks=$((vol0_num_comps + 1)) $dev0 missing +check wait + +# Test the member0 +imsm_check member $member0 $((vol_num_comps + 1)) 1 $vol0_comp_size $((vol0_num_comps * vol0_comp_size)) 0 64 +testdev $member0 $vol0_num_comps $vol0_comp_size 64 diff --git a/tests/18imsm-r0_2d-takeover-r10_4d b/tests/18imsm-r0_2d-takeover-r10_4d new file mode 100644 index 0000000..0e77e5d --- /dev/null +++ b/tests/18imsm-r0_2d-takeover-r10_4d @@ -0,0 +1,22 @@ +. tests/env-imsm-template + +# RAID 0 volume, 2 disks change to RAID 10 volume, 4 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" +spare_list="$dev2 $dev3" + +# Before: RAID 0 volume, 2 disks, 256k chunk size +vol0_level=0 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$num_disks +vol0_offset=0 + +# After: RAID 10 volume, 4 disks, 256k chunk size +vol0_new_level=10 +vol0_new_num_comps=$vol0_num_comps +vol0_new_chunk=128 + +. tests/imsm-grow-template 0 1 diff --git a/tests/18imsm-r10_4d-takeover-r0_2d b/tests/18imsm-r10_4d-takeover-r0_2d new file mode 100644 index 0000000..8a9606b --- /dev/null +++ b/tests/18imsm-r10_4d-takeover-r0_2d @@ -0,0 +1,22 @@ +. tests/env-imsm-template + +# RAID 10 volume, 4 disks change to RAID 0 volume, 2 disks +# POSITIVE test + +num_disks=4 +device_list="$dev0 $dev1 $dev2 $dev3" + +# Before: RAID 10 volume, 4 disks, 128k chunk size +vol0_level=10 +vol0_comp_size=$((5 * 1024)) +vol0_chunk=128 +vol0_num_comps=$((num_disks - 2)) +vol0_offset=0 + +# After: RAID 0 volume, 2 disks, 128k chunk size +vol0_new_level=0 +vol0_new_num_comps=2 +vol0_new_chunk=128 +new_num_disks=2 + +. tests/imsm-grow-template 0 1 diff --git a/tests/18imsm-r1_2d-takeover-r0_1d b/tests/18imsm-r1_2d-takeover-r0_1d new file mode 100644 index 0000000..049f19c --- /dev/null +++ b/tests/18imsm-r1_2d-takeover-r0_1d @@ -0,0 +1,21 @@ +. tests/env-imsm-template + +# RAID 1 volume, 2 disks change to RAID 0 volume, 1 disks +# POSITIVE test + +num_disks=2 +device_list="$dev0 $dev1" + +# Before: RAID 1 volume, 2 disks +vol0_level=1 +vol0_comp_size=$((5 * 1024)) +vol0_num_comps=$(( $num_disks - 1 )) +vol0_offset=0 + +# After: RAID 0 volume, 1 disks, 64k chunk size +vol0_new_level=0 +vol0_new_num_comps=1 +vol0_new_chunk=64 +new_num_disks=1 + +. tests/imsm-grow-template 0 1 diff --git a/tests/19raid6auto-repair b/tests/19raid6auto-repair new file mode 100644 index 0000000..ce4a7c0 --- /dev/null +++ b/tests/19raid6auto-repair @@ -0,0 +1,49 @@ +number_of_disks=5 +chunksize_in_kib=512 +chunksize_in_b=$[chunksize_in_kib*1024] +array_data_size_in_kib=$[chunksize_in_kib*(number_of_disks-2)*number_of_disks] +array_data_size_in_b=$[array_data_size_in_kib*1024] +devs="$dev0 $dev1 $dev2 $dev3 $dev4" + +# default 2048 sectors +data_offset_in_kib=$[2048/2] + +# make a raid5 from a file +dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$array_data_size_in_kib + +# perform test for every layout +layouts="ls rs la ra parity-first ddf-zero-restart ddf-N-restart ddf-N-continue \ + left-asymmetric-6 right-asymmetric-6 left-symmetric-6 \ + right-symmetric-6 parity-first-6" + +for layout in $layouts +do + mdadm -CR $md0 -l6 --layout=$layout -n$number_of_disks -c $chunksize_in_kib $devs + dd if=/tmp/RandFile of=$md0 bs=1024 count=$array_data_size_in_kib + blockdev --flushbufs $md0; sync + check wait + blockdev --flushbufs $devs; sync + echo 3 > /proc/sys/vm/drop_caches + cmp -s -n $array_data_size_in_b $md0 /tmp/RandFile || { echo sanity cmp failed ; exit 2; } + + # wipe out 5 chunks on each device + dd if=/dev/urandom of=$dev0 bs=1024 count=$[5*chunksize_in_kib] seek=$[data_offset_in_kib+chunksize_in_kib*0] + dd if=/dev/urandom of=$dev1 bs=1024 count=$[5*chunksize_in_kib] seek=$[data_offset_in_kib+chunksize_in_kib*5] + dd if=/dev/urandom of=$dev2 bs=1024 count=$[5*chunksize_in_kib] seek=$[data_offset_in_kib+chunksize_in_kib*10] + dd if=/dev/urandom of=$dev3 bs=1024 count=$[5*chunksize_in_kib] seek=$[data_offset_in_kib+chunksize_in_kib*15] + dd if=/dev/urandom of=$dev4 bs=1024 count=$[5*chunksize_in_kib] seek=$[data_offset_in_kib+chunksize_in_kib*20] + + blockdev --flushbufs $devs; sync + echo 3 > /proc/sys/vm/drop_caches + + $dir/raid6check $md0 0 0 2>&1 | grep -qs "Error" || { echo should detect errors; exit 2; } + + $dir/raid6check $md0 0 0 autorepair > /dev/null || { echo repair failed; exit 2; } + blockdev --flushbufs $md0 $devs; sync + echo 3 > /proc/sys/vm/drop_caches + + $dir/raid6check $md0 0 0 2>&1 | grep -qs "Error" && { echo errors detected; exit 2; } + cmp -s -n $array_data_size_in_b $md0 /tmp/RandFile || { echo cmp failed ; exit 2; } + + mdadm -S $md0 +done diff --git a/tests/19raid6check b/tests/19raid6check new file mode 100644 index 0000000..67958c6 --- /dev/null +++ b/tests/19raid6check @@ -0,0 +1,27 @@ +# +# Confirm that raid6check handles all RAID6 layouts. +# Try both 4 and 5 devices. + +layouts='ls rs la ra' +lv=`uname -r` +if expr $lv '>=' 2.6.30 > /dev/null +then + layouts="$layouts parity-first ddf-zero-restart ddf-N-restart ddf-N-continue \ + left-asymmetric-6 right-asymmetric-6 left-symmetric-6 right-symmetric-6 parity-first-6" +fi + +for layout in $layouts +do + for devs in 4 5 + do + dl="$dev0 $dev1 $dev2 $dev3" + if [ $devs = 5 ]; then dl="$dl $dev4"; fi + + mdadm -CR $md0 -l6 --layout $layout -n$devs $dl + check wait + tar cf - /etc > $md0 + ./raid6check $md0 0 0 | grep 'Error detected' && exit 1 + mdadm -S $md0 + done +done + diff --git a/tests/19raid6repair b/tests/19raid6repair new file mode 100644 index 0000000..26846cc --- /dev/null +++ b/tests/19raid6repair @@ -0,0 +1,56 @@ +number_of_disks=4 +chunksize_in_kib=512 +chunksize_in_b=$[chunksize_in_kib*1024] +array_data_size_in_kib=$[chunksize_in_kib*(number_of_disks-2)*number_of_disks] +array_data_size_in_b=$[array_data_size_in_kib*1024] +devs="$dev1 $dev2 $dev3 $dev4" + +# default 2048 sectors +data_offset_in_kib=$[2048/2] + +layouts="ls rs la ra parity-first ddf-zero-restart ddf-N-restart ddf-N-continue \ + left-asymmetric-6 right-asymmetric-6 left-symmetric-6 \ + right-symmetric-6 parity-first-6" + +for layout in $layouts +do + for failure in "$dev3 3 3 2" "$dev3 3 2 3" "$dev3 3 2 1" "$dev3 3 2 0" \ + "$dev4 3 3 0" "$dev4 3 3 1" "$dev4 3 3 2" \ + "$dev1 3 0 1" "$dev1 3 0 2" "$dev1 3 0 3" \ + "$dev2 3 1 0" "$dev2 3 1 2" "$dev2 3 1 3" ; do + failure_split=( $failure ) + device_with_error=${failure_split[0]} + stripe_with_error=${failure_split[1]} + repair_params="$stripe_with_error ${failure_split[2]} ${failure_split[3]}" + start_of_errors_in_kib=$[data_offset_in_kib+chunksize_in_kib*stripe_with_error] + + # make a raid5 from a file + dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$array_data_size_in_kib + mdadm -CR $md0 -l6 --layout=$layout -n$number_of_disks -c $chunksize_in_kib $devs + dd if=/tmp/RandFile of=$md0 bs=1024 count=$array_data_size_in_kib + blockdev --flushbufs $md0; sync + + check wait + blockdev --flushbufs $devs; sync + echo 3 > /proc/sys/vm/drop_caches + cmp -s -n $array_data_size_in_b $md0 /tmp/RandFile || { echo sanity cmp failed ; exit 2; } + + dd if=/dev/urandom of=$device_with_error bs=1024 count=$chunksize_in_kib seek=$start_of_errors_in_kib + blockdev --flushbufs $device_with_error; sync + echo 3 > /proc/sys/vm/drop_caches + + $dir/raid6check $md0 0 0 2>&1 | grep -qs "Error" || { echo should detect errors; exit 2; } + + $dir/raid6check $md0 repair $repair_params > /dev/null || { echo repair failed; exit 2; } + blockdev --flushbufs $md0 $devs; sync + echo 3 > /proc/sys/vm/drop_caches + + $dir/raid6check $md0 0 0 2>&1 | grep -qs "Error" && { echo errors detected; exit 2; } + cmp -s -n $array_data_size_in_b $md0 /tmp/RandFile || { echo cmp failed ; exit 2; } + + mdadm -S $md0 + udevadm settle + sync + echo 3 > /proc/sys/vm/drop_caches + done +done diff --git a/tests/19repair-does-not-destroy b/tests/19repair-does-not-destroy new file mode 100644 index 0000000..a92883f --- /dev/null +++ b/tests/19repair-does-not-destroy @@ -0,0 +1,28 @@ +number_of_disks=7 +chunksize_in_kib=512 +array_data_size_in_kib=$[chunksize_in_kib*(number_of_disks-2)*number_of_disks] +array_data_size_in_b=$[array_data_size_in_kib*1024] +devs="$dev0 $dev1 $dev2 $dev3 $dev4 $dev5 $dev6" + +dd if=/dev/urandom of=/tmp/RandFile bs=1024 count=$array_data_size_in_kib +mdadm -CR $md0 -l6 -n$number_of_disks -c $chunksize_in_kib $devs +dd if=/tmp/RandFile of=$md0 bs=1024 count=$array_data_size_in_kib +blockdev --flushbufs $md0; sync +check wait +blockdev --flushbufs $devs; sync +echo 3 > /proc/sys/vm/drop_caches +$dir/raid6check $md0 repair 1 2 3 > /dev/null # D D +$dir/raid6check $md0 repair 8 2 5 > /dev/null # D P +$dir/raid6check $md0 repair 15 4 6 > /dev/null # D Q +$dir/raid6check $md0 repair 22 5 6 > /dev/null # P Q +$dir/raid6check $md0 repair 3 4 0 > /dev/null # Q D +$dir/raid6check $md0 repair 3 3 1 > /dev/null # P D +$dir/raid6check $md0 repair 6 4 5 > /dev/null # D<D +$dir/raid6check $md0 repair 13 5 4 > /dev/null # D>D +blockdev --flushbufs $devs; sync +echo 3 > /proc/sys/vm/drop_caches +$dir/raid6check $md0 0 0 2>&1 | grep -qs "Error" && { echo errors detected; exit 2; } +cmp -s -n $array_data_size_in_b $md0 /tmp/RandFile || { echo should not mess up correct stripe ; exit 2; } + +mdadm -S $md0 +udevadm settle diff --git a/tests/20raid5journal b/tests/20raid5journal new file mode 100644 index 0000000..f751ace --- /dev/null +++ b/tests/20raid5journal @@ -0,0 +1,64 @@ +# check write journal of raid456 + +# test --detail +test_detail_shows_journal() { + mdadm -D $1 | grep journal || { + echo >&2 "ERROR --detail does show journal device!"; mdadm -D $1 ; exit 1; } +} + +# test --examine +test_examine_shows_journal() { + mdadm -E $1 | grep Journal || { + echo >&2 "ERROR --examine does show Journal device!"; mdadm -E $1 ; exit 1; } +} + +# test --create +create_with_journal_and_stop() { + mdadm -CR $md0 -l5 -n4 $dev0 $dev1 $dev2 $dev3 --write-journal $dev4 + check wait + tar cf - /etc > $md0 + ./raid6check $md0 0 0 | grep 'Error detected' && exit 1 + test_detail_shows_journal $md0 + test_examine_shows_journal $dev4 + mdadm -S $md0 +} + +# test --assemble +test_assemble() { + create_with_journal_and_stop + if mdadm -A $md0 $dev0 $dev1 $dev2 $dev3 + then + echo >&2 "ERROR should return 1 when journal is missing!"; cat /proc/mdstat ; exit 1; + fi + mdadm -S $md0 + + mdadm -A $md0 $dev0 $dev1 $dev2 $dev3 --force + check readonly + mdadm -S $md0 +} + +# test --incremental +test_incremental() { + create_with_journal_and_stop + for d in $dev0 $dev1 $dev2 $dev3 + do + mdadm -I $d + done + check inactive + mdadm -I $dev4 + check raid5 + mdadm -S $md0 + + # test --incremental with journal missing + for d in $dev0 $dev1 $dev2 $dev3 + do + mdadm -I $d + done + mdadm -R $md0 + check readonly + mdadm -S $md0 +} + +create_with_journal_and_stop +test_assemble +test_incremental diff --git a/tests/21raid5cache b/tests/21raid5cache new file mode 100644 index 0000000..0dd97bf --- /dev/null +++ b/tests/21raid5cache @@ -0,0 +1,87 @@ +# check data integrity with raid5 write back cache + +# create a 4kB random file and 4 files each with a 1kB chunk of the random file: +# randfile: ABCD randchunk[0-3]: A B C D +# +# then create another random 1kB chunk E, and a new random page with A, B, E, D: +# randchunk4: E newrandfile: ABED +create_random_data() { + dd if=/dev/urandom of=/tmp/randfile bs=4k count=1 + for x in {0..3} + do + dd if=/tmp/randfile of=/tmp/randchunk$x bs=1k count=1 skip=$x count=1 + done + + dd if=/dev/urandom of=/tmp/randchunk4 bs=1k count=1 + + rm /tmp/newrandfile + for x in 0 1 4 3 + do + cat /tmp/randchunk$x >> /tmp/newrandfile + done +} + +# create array, $1 could be 5 for raid5 and 6 for raid6 +create_array() { + if [ $1 -lt 5 -o $1 -gt 6 ] + then + echo wrong array type $1 + exit 2 + fi + + mdadm -CR $md0 -c4 -l5 -n10 $dev0 $dev1 $dev2 $dev3 $dev4 $dev5 $dev6 $dev11 $dev8 $dev9 --write-journal $dev10 + check wait + echo write-back > /sys/block/md0/md/journal_mode +} + +restart_array_write_back() { + mdadm -S $md0 + mdadm -A $md0 $dev0 $dev1 $dev2 $dev3 $dev4 $dev5 $dev6 $dev11 $dev8 $dev9 $dev10 + echo write-back > /sys/block/md0/md/journal_mode +} + +# compare the first page of md0 with file in $1 +cmp_first_page() { + cmp -n 4096 $1 $md0 || { echo cmp failed ; exit 2 ; } +} + +# write 3 pages after the first page of md0 +write_three_pages() { + for x in {1..3} + do + dd if=/dev/urandom of=$md0 bs=4k count=1 seek=$x count=1 + done +} + +# run_test <array_type:5/6> <degraded_or_not:yes/no> +run_test() { + create_random_data + create_array $1 + + if [ $2 == yes ] + then + mdadm --fail $md0 $dev0 + fi + + dd if=/tmp/randfile of=$md0 bs=4k count=1 + restart_array_write_back + cmp_first_page /tmp/randfile + restart_array_write_back + write_three_pages + cmp_first_page /tmp/randfile + + + dd if=/tmp/randchunk4 of=/dev/md0 bs=1k count=1 seek=2 + restart_array_write_back + cmp_first_page /tmp/newrandfile + restart_array_write_back + write_three_pages + cmp_first_page /tmp/newrandfile + + mdadm -S $md0 +} + +run_test 5 no +run_test 5 yes +run_test 6 no +run_test 6 yes diff --git a/tests/ToTest b/tests/ToTest new file mode 100644 index 0000000..b98e266 --- /dev/null +++ b/tests/ToTest @@ -0,0 +1,44 @@ + +multipath!! + +add/remove/fail + raid1 DONE + raid5 DONE + raid6/10 needed?? + +assemble + by devices DONE + by uuid DONE + by superminor DONE + by config file DONE + + various --updates DONE (not sparc2.2 or summaries) + +stop + --scan + +readonly/readwrite + +bitmap + separate file + internal + filename in config file + +examine + --scan + --brief + +detail + +grow: + size + raid1/5/6 DONE + devices + raid1 add DONE + raid1 shrink DONE + +'--quiet' option, and remove "" +'--name' option fo v1, and configfile etc... + +faulty + errors in raid1/5/6 diff --git a/tests/env-ddf-template b/tests/env-ddf-template new file mode 100644 index 0000000..90d7272 --- /dev/null +++ b/tests/env-ddf-template @@ -0,0 +1,113 @@ +sha1_sum() { + sha1sum "$1" | cut -c 1-40 +} + +get_rootdev() { + local dev=$(stat -c %D /) + local maj=$(expr $dev : '\(..*\)..') + local min=${dev#$maj} + local bd=/dev/$(basename $(readlink /sys/dev/block/$((0x$maj)):$((0x$min)))) + [ -b $bd ] || exit 1 + echo $bd +} + +get_sysdir() { + local mddev=$1 + [ -L $mddev ] && mddev=$(readlink -f $mddev) + echo "/sys/class/block/$(basename $mddev)/md" +} + +get_raiddisks() { + sysdir=$(get_sysdir "$1") + for i in $(seq 0 $(($(cat $sysdir/raid_disks)-1))); do + if [ -d $sysdir/rd$i ]; then + readlink -f /dev/block/$(cat $sysdir/rd$i/block/dev) + else + echo MISSING + fi + done +} + +get_present() { + get_raiddisks $1 | grep -vc MISSING +} + +ddf_check() { + udevadm settle + case $1 in + container ) + grep -s "blocks super external:ddf" /proc/mdstat > /dev/null || { + echo >&2 "**Fatal** Correctly formed container not found"; cat /proc/mdstat; exit 1; } + ;; + member ) + t_member=$2 + t_num_disks=$3 + t_level=$4 + t_rd_size=$5 + t_size=$6 + t_offset=$7 + t_chunk=$8 + t_layout=$9 + + if [ $t_chunk -ne 0 ]; then + t_rd_size=$((t_rd_size & ~(t_chunk - 1))) + fi + case $t_level in + 0) t_size=$((t_num_disks*$t_rd_size));; + 1) t_size=$t_rd_size;; + 4|5) t_size=$(((t_num_disks-1)*$t_rd_size));; + 6) t_size=$(((t_num_disks-2)*$t_rd_size));; + 10) t_size=$((t_num_disks*$t_rd_size/t_layout));; + esac + + err=0 + + eval `stat -L -c "let major=0x%t; let minor=0x%T;" $t_member` + sysfs=/sys/dev/block/${major}:${minor} + if [ ! -f ${sysfs}/md/array_state ]; then + echo "**Fatal**: Array member $t_member not found" >&2; cat /proc/mdstat >&2; exit 1 + fi + _chunk=`cat ${sysfs}/md/chunk_size` + if [ $t_chunk -ne $((_chunk/1024)) ]; then + echo "**Error**: Chunk size mismatch - expected $t_chunk, actual $_chunk" >&2 + err=$((err + 1)) + fi + for i in `seq 0 $((t_num_disks - 1))`; do + _offset=`cat ${sysfs}/md/rd${i}/offset` + if [ $t_offset -ne $((_offset / 2)) ]; then + echo "**Error**: Offset mismatch - expected $t_offset, actual $((_offset/2))" >&2 + err=$((err + 1)) + fi + _rd_size=`cat ${sysfs}/md/rd${i}/size` + if [ $t_rd_size -ne $_rd_size ]; then + echo "**Error**: Component size mismatch - expected $t_rd_size, actual $_rd_size" >&2 + err=$((err + 1)) + fi + done + _size=`cat ${sysfs}/md/array_size` + [ o$_size = odefault ] && _size=$(($(cat ${sysfs}/size)/2)) + if [ $t_size -ne $_size ]; then + echo "**Error**: Array size mismatch - expected $t_size, actual $_size" >&2 + err=$((err + 1)) + fi + if [ $err -gt 0 ]; then + echo "$t_member failed check" >&2 + cat /proc/mdstat >&2 + mdadm -E /dev/loop8 >&2 + exit 1 + fi + ;; + * ) + echo >&2 "**Error** unknown check $1"; exit 1; + esac +} + +container=/dev/md/ddf0 +member0=/dev/md/vol0 +member1=/dev/md/vol1 +member2=/dev/md/vol2 +member3=/dev/md/vol3 +member4=/dev/md/vol4 + +# We don't want systemd to start system mdmon; start our own +export MDADM_NO_SYSTEMCTL=1 diff --git a/tests/env-imsm-template b/tests/env-imsm-template new file mode 100644 index 0000000..d524771 --- /dev/null +++ b/tests/env-imsm-template @@ -0,0 +1,91 @@ +imsm_check() { + udevadm settle + case $1 in + container ) + grep -s "blocks super external:imsm" /proc/mdstat > /dev/null || { + echo >&2 "**Fatal** Correctly formed container not found"; cat /proc/mdstat; exit 1; } + ;; + member ) + t_member=$2 + t_num_disks=$3 + t_level=$4 + t_rd_size=$5 + t_size=$6 + t_offset=$7 + t_chunk=$8 + + t_rd_size=$((t_rd_size & ~(1024 - 1))) + + if [ $t_level -eq 1 ]; then + t_chunk=64 + fi + + t_num_data_disks=0 + + case $t_level in + 0) + t_num_data_disks=$t_num_disks + ;; + 1) + t_num_data_disks=1 + ;; + 5) + t_num_data_disks=$((t_num_disks-1)) + ;; + 10) + t_num_data_disks=$((t_num_disks/2)) + ;; + esac + + t_size=$((t_rd_size*t_num_data_disks)) + + err=0 + + eval `stat -L -c "let major=0x%t; let minor=0x%T;" $t_member` + sysfs=/sys/dev/block/${major}:${minor} + if [ ! -f ${sysfs}/md/array_state ]; then + echo "**Fatal**: Array member $t_member not found" >&2; cat /proc/mdstat >&2; exit 1 + fi + _chunk=`cat ${sysfs}/md/chunk_size` + if [ $t_chunk -ne $((_chunk/1024)) ]; then + echo "**Error**: Chunk size mismatch - expected $t_chunk, actual $(($_chunk/1024))" >&2 + err=$((err + 1)) + fi + for i in `seq 0 $((t_num_disks - 1))`; do + _offset=`cat ${sysfs}/md/rd${i}/offset` + if [ $t_offset -ne $((_offset / 2)) ]; then + echo "**Error**: Offset mismatch - expected $t_offset, actual $_offset" >&2 + err=$((err + 1)) + fi + _rd_size=`cat ${sysfs}/md/rd${i}/size` + if [ $t_rd_size -ne $_rd_size ]; then + echo "**Error**: Component size mismatch - expected $t_rd_size, actual $_rd_size" >&2 + err=$((err + 1)) + fi + done + _size=`cat ${sysfs}/md/array_size` + if [ $t_size -ne $_size ]; then + echo "**Error**: Array size mismatch - expected $t_size, actual $_size" >&2 + err=$((err + 1)) + fi + if [ $err -gt 0 ]; then + echo "$t_member failed check" >&2 + cat /proc/mdstat >&2 + mdadm -E /dev/loop0 >&2 + exit 1 + fi + ;; + * ) + echo >&2 "**Error** unknown check $1"; exit 1; + esac +} + +export IMSM_NO_PLATFORM=1 +export IMSM_DEVNAME_AS_SERIAL=1 +export IMSM_TEST_OROM=1 +container=/dev/md/container +member0=/dev/md/vol0 +member1=/dev/md/vol1 +member2=/dev/md/vol2 +member3=/dev/md/vol3 +member4=/dev/md/vol4 diff --git a/tests/func.sh b/tests/func.sh new file mode 100644 index 0000000..9710a53 --- /dev/null +++ b/tests/func.sh @@ -0,0 +1,344 @@ +#!/bin/bash + +# We test mdadm on loop-back block devices. +# dir for storing files should be settable by command line maybe +size=20000 +# super0, round down to multiple of 64 and substract 64 +mdsize0=19904 +# super00 is nested, subtract 128 +mdsize00=19840 +# super1.0 round down to multiple of 2, subtract 8 +mdsize1=19992 +mdsize1a=19988 +mdsize12=19988 +# super1.2 for linear: round to multiple of 2, subtract 4 +mdsize1_l=19996 +mdsize2_l=19996 +# subtract another 4 for bitmaps +mdsize1b=19988 +mdsize11=19992 +mdsize11a=19456 +mdsize12=19988 + +# ddf needs bigger devices as 32Meg is reserved! +ddfsize=65536 + +# $1 is optional parameter, it shows why to save log +save_log() { + status=$1 + logfile="$status""$_basename".log + + cat $targetdir/stderr >> $targetdir/log + cp $targetdir/log $logdir/$_basename.log + echo "## $HOSTNAME: saving dmesg." >> $logdir/$logfile + dmesg -c >> $logdir/$logfile + echo "## $HOSTNAME: saving proc mdstat." >> $logdir/$logfile + cat /proc/mdstat >> $logdir/$logfile + array=($(mdadm -Ds | cut -d' ' -f2)) + [ "$1" == "fail" ] && + echo "FAILED - see $logdir/$_basename.log and $logdir/$logfile for details" + if [ $DEVTYPE == 'lvm' ] + then + # not supported lvm type yet + echo + elif [ "$DEVTYPE" == 'loop' -o "$DEVTYPE" == 'disk' ] + then + if [ ! -z "$array" -a ${#array[@]} -ge 1 ] + then + echo "## $HOSTNAME: mdadm -D ${array[@]}" >> $logdir/$logfile + $mdadm -D ${array[@]} >> $logdir/$logfile + # ignore saving external(external file, imsm...) bitmap + cat /proc/mdstat | grep -q "linear\|external" && return 0 + md_disks=($($mdadm -D -Y ${array[@]} | grep "/dev/" | cut -d'=' -f2)) + cat /proc/mdstat | grep -q "bitmap" + if [ $? -eq 0 ] + then + echo "## $HOSTNAME: mdadm -X ${md_disks[@]}" >> $logdir/$logfile + $mdadm -X ${md_disks[@]} >> $logdir/$logfile + echo "## $HOSTNAME: mdadm -E ${md_disks[@]}" >> $logdir/$logfile + $mdadm -E ${md_disks[@]} >> $logdir/$logfile + fi + else + echo "## $HOSTNAME: no array assembled!" >> $logdir/$logfile + fi + fi +} + +cleanup() { + udevadm settle + $mdadm -Ssq 2> /dev/null + case $DEVTYPE in + loop ) + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + do + losetup -d /dev/loop$d &> /dev/null + rm -f /dev/disk/by-path/loop* + rm -f /var/tmp/mdtest$d + done + ;; + lvm ) + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + do + eval "lvremove --quiet -f \$dev$d" + done + ;; + disk ) + $mdadm --zero ${disks[@]} &> /dev/null + ;; + esac +} + +do_clean() +{ + mdadm -Ss > /dev/null + mdadm --zero $devlist 2> /dev/null + dmesg -c > /dev/null +} + +check_env() { + user=$(id -un) + [ "X$user" != "Xroot" ] && { + echo "test: testing can only be done as 'root'." + exit 1 + } + [ \! -x $mdadm ] && { + echo "test: please run make everything before perform testing." + exit 1 + } + cmds=(mdadm lsblk df udevadm losetup mkfs.ext3 fsck seq) + for cmd in ${cmds[@]} + do + which $cmd > /dev/null || { + echo "$cmd command not found!" + exit 1 + } + done + if $(lsblk -a | grep -iq raid) + then + # donot run mdadm -Ss directly if there are RAIDs working. + echo "test: please run test suite without running RAIDs environment." + exit 1 + fi + # Check whether to run multipath tests + modprobe multipath 2> /dev/null + grep -sq 'Personalities : .*multipath' /proc/mdstat && + MULTIPATH="yes" +} + +do_setup() { + trap cleanup 0 1 3 15 + trap ctrl_c 2 + + check_env + [ -d $logdir ] || mkdir -p $logdir + + devlist= + if [ "$DEVTYPE" == "loop" ] + then + # make sure there are no loop devices remaining. + # udev started things can sometimes prevent them being stopped + # immediately + while grep loop /proc/partitions > /dev/null 2>&1 + do + $mdadm -Ssq + losetup -d /dev/loop[0-9]* 2> /dev/null + sleep 0.2 + done + elif [ "$DEVTYPE" == "disk" ] + then + if [ ! -z "$disks" ] + then + for d in $(seq 0 ${#disks[@]}) + do + eval "dev$d=${disks[$d]}" + eval devlist=\"\$devlist \$dev$d\" + eval devlist$d=\"\$devlist\" + done + $mdadm --zero ${disks[@]} &> /dev/null + else + echo "Forget to provide physical devices for disk mode." + exit 1 + fi + fi + for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + do + sz=$size + [ $d -gt 7 ] && sz=$ddfsize + case $DEVTYPE in + loop) + [ -f $targetdir/mdtest$d ] || + dd if=/dev/zero of=$targetdir/mdtest$d count=$sz bs=1K > /dev/null 2>&1 + # make sure udev doesn't touch + mdadm --zero $targetdir/mdtest$d 2> /dev/null + [ -b /dev/loop$d ] || mknod /dev/loop$d b 7 $d + if [ $d -eq 7 ] + then + losetup /dev/loop$d $targetdir/mdtest6 # for multipath use + else + losetup /dev/loop$d $targetdir/mdtest$d + fi + eval dev$d=/dev/loop$d + eval file$d=$targetdir/mdtest$d + ;; + lvm) + unset MULTIPATH + eval dev$d=/dev/mapper/${LVM_VOLGROUP}-mdtest$d + if ! lvcreate --quiet -L ${sz}K -n mdtest$d $LVM_VOLGROUP + then + trap '' 0 # make sure lvremove is not called + eval echo error creating \$dev$d + exit 129 + fi + ;; + ram) + unset MULTIPATH + eval dev$d=/dev/ram$d + ;; + esac + eval devlist=\"\$devlist \$dev$d\" + eval devlist$d=\"\$devlist\" + #" <-- add this quote to un-confuse vim syntax highlighting + done + path0=$dev6 + path1=$dev7 + ulimit -c unlimited + [ -f /proc/mdstat ] || modprobe md_mod + echo 2000 > /proc/sys/dev/raid/speed_limit_max + echo 0 > /sys/module/md_mod/parameters/start_ro +} + +# check various things +check() { + case $1 in + opposite_result ) + if [ $? -eq 0 ]; then + die "This command shouldn't run successfully" + fi + ;; + spares ) + spares=$(tr '] ' '\012\012' < /proc/mdstat | grep -c '(S)' || exit 0) + [ $spares -ne $2 ] && + die "expected $2 spares, found $spares" + ;; + raid* | linear ) + grep -sq "active $1 " /proc/mdstat || + die "active $1 not found" + ;; + algorithm ) + grep -sq " algorithm $2 " /proc/mdstat || + die "algorithm $2 not found" + ;; + resync | recovery | reshape ) + cnt=5 + while ! grep -sq $1 /proc/mdstat + do + if [ $cnt -gt 0 ] && grep -v idle /sys/block/md*/md/sync_action > /dev/null + then # Something isn't idle - wait a bit + sleep 0.5 + cnt=$[cnt-1] + else + die "no $1 happening" + fi + done + ;; + nosync ) + sleep 0.5 + # Since 4.2 we delay the close of recovery until there has been a chance for + # spares to be activated. That means that a recovery that finds nothing + # to do can still take a little longer than expected. + # add an extra check: is sync_completed shows the end is reached, assume + # there is no recovery. + if grep -sq -E '(resync|recovery|reshape) *=' /proc/mdstat + then + incomplete=`grep / /sys/block/md*/md/sync_completed 2> /dev/null | sed '/^ *\([0-9]*\) \/ \1/d'` + [ -n "$incomplete" ] && + die "resync or recovery is happening!" + fi + ;; + wait ) + p=`cat /proc/sys/dev/raid/speed_limit_max` + echo 2000000 > /proc/sys/dev/raid/speed_limit_max + sleep 0.1 + while grep -Eq '(resync|recovery|reshape|check|repair) *=' /proc/mdstat || + grep -v idle > /dev/null /sys/block/md*/md/sync_action + do + sleep 0.5 + done + echo $p > /proc/sys/dev/raid/speed_limit_max + ;; + state ) + grep -sq "blocks.*\[$2\]\$" /proc/mdstat || + die "state $2 not found!" + sleep 0.5 + ;; + bitmap ) + grep -sq bitmap /proc/mdstat || + die "no bitmap" + ;; + nobitmap ) + grep -sq "bitmap" /proc/mdstat && + die "bitmap present" + ;; + readonly ) + grep -sq "read-only" /proc/mdstat || + die "array is not read-only!" + ;; + inactive ) + grep -sq "inactive" /proc/mdstat || + die "array is not inactive!" + ;; + # It only can be used when there is only one raid + chunk ) + chunk_size=`awk -F',' '/chunk/{print $2}' /proc/mdstat | awk -F'[a-z]' '{print $1}'` + if [ "$chunk_size" -ne "$2" ] ; then + die "chunksize should be $2, but it's $chunk_size" + fi + ;; + * ) + die "unknown check $1" + ;; + esac +} + +no_errors() { + if [ -s $targetdir/stderr ] + then + echo Bad errors from mdadm: + cat $targetdir/stderr + exit 2 + fi +} + +# basic device test +testdev() { + [ -b $1 ] || die "$1 isn't a block device." + [ "$DEVTYPE" == "disk" ] && return 0 + udevadm settle + dev=$1 + cnt=$2 + dvsize=$3 + chunk=$4 + if [ -z "$5" ] + then + mkfs.ext3 -F -j $dev > /dev/null 2>&1 && fsck -fn $dev >&2 + fi + dsize=$[dvsize/chunk] + dsize=$[dsize*chunk] + rasize=$[dsize*2*cnt] + # rasize is in sectors + if [ -n "$DEV_ROUND_K" ] + then + rasize=$[rasize/DEV_ROUND_K/2] + rasize=$[rasize*DEV_ROUND_K*2] + fi + [ `/sbin/blockdev --getsize $dev` -eq 0 ] && sleep 2 + _sz=`/sbin/blockdev --getsize $dev` + [ $rasize -lt $_sz -o $[rasize*4/5] -gt $_sz ] && + die "size is wrong for $dev: $cnt * $dvsize (chunk=$chunk) = $rasize, not $_sz" + return 0 +} + +rotest() { + dev=$1 + fsck -fn $dev >&2 +} diff --git a/tests/imsm-grow-template b/tests/imsm-grow-template new file mode 100644 index 0000000..1a8676e --- /dev/null +++ b/tests/imsm-grow-template @@ -0,0 +1,119 @@ + +# 0 - POSITIVE test, otherwise NEGATIVE test +negative_test=$1 + +# 0 - On-line Capacity Expansion test, otherwise LEVEL migration or CHUNK size migration test +migration_test=$2 + +function grow_member() { + local member=$1 + local disks=$2 + local comps=$3 + local level=$4 + local size=$5 + local offset=$6 + local chunk=$7 + local old_chunk=$8 + local array_size=$((comps * size)) + + rm -f $backup_imsm + if [ $chunk -eq $old_chunk ]; then + ( set -ex; mdadm --grow $member --level=$level ) + else + ( set -ex; mdadm --grow $member --chunk=$chunk ) + fi + local status=$? + if [ $negative_test -ne 0 ]; then + if [ $status -eq 0 ]; then + echo >&2 "**Error**: $member: --grow should failed, but it completed successfuly" + exit 1 + fi + return + fi + check wait + sleep 5 + imsm_check member $member $disks $level $size $array_size $offset $chunk + testdev $member $comps $size $chunk +} + +# Create container +mdadm --create --run $container --auto=md --metadata=imsm --raid-disks=$num_disks $device_list +check wait +imsm_check container $num_disks + +# Create first volume inside the container +if [[ ! -z $vol0_chunk ]]; then + mdadm --create --run $member0 --auto=md --level=$vol0_level --size=$vol0_comp_size --chunk=$vol0_chunk --raid-disks=$num_disks $device_list +else + mdadm --create --run $member0 --auto=md --level=$vol0_level --size=$vol0_comp_size --raid-disks=$num_disks $device_list +fi +check wait + +# Create second volume inside the container (if defined) +if [ ! -z $vol1_level ]; then + if [ ! -z $vol1_chunk ]; then + mdadm --create --run $member1 --auto=md --level=$vol1_level --size=$vol1_comp_size --chunk=$vol1_chunk --raid-disks=$num_disks $device_list + else + mdadm --create --run $member1 --auto=md --level=$vol1_level --size=$vol1_comp_size --raid-disks=$num_disks $device_list + fi + check wait +fi + +# Wait for any RESYNC to complete +check wait + +# Test first volume +imsm_check member $member0 $num_disks $vol0_level $vol0_comp_size $((vol0_comp_size * vol0_num_comps)) $vol0_offset $vol0_chunk +testdev $member0 $vol0_num_comps $vol0_comp_size $vol0_chunk + +# Test second volume (if defined) +if [ ! -z $vol1_level ]; then + imsm_check member $member1 $num_disks $vol1_level $vol1_comp_size $((vol1_comp_size * vol1_num_comps)) $vol1_offset $vol1_chunk + testdev $member1 $vol1_num_comps $vol1_comp_size $vol1_chunk +fi + +# Add extra disks to container if operation requires spares in container. +for i in $spare_list +do + mdadm --add $container $i + check wait + num_disks=$((num_disks + 1)) +done + +imsm_check container $num_disks +num_disks=$((num_disks + add_to_num_disks)) +backup_imsm=/tmp/backup_imsm + +# Grow each member or a container depending on the type of an operation +if [ $migration_test -ne 0 ]; then + if [ -z $new_num_disks ]; then + new_num_disks=$num_disks + fi + grow_member $member0 $new_num_disks $vol0_new_num_comps $vol0_new_level $vol0_comp_size $vol0_offset $vol0_new_chunk $vol0_chunk + if [[ $vol1_new_chunk -ne 0 ]] ; then + grow_member $member1 $new_num_disks $vol1_new_num_comps $vol1_new_level $vol1_comp_size $vol1_offset $vol1_new_chunk $vol1_chunk + fi +else + rm -f $backup_imsm + ( set -x; mdadm --grow $container --raid-disks=$num_disks ) + grow_status=$? + if [ $negative_test -ne 0 ]; then + if [ $grow_status -eq 0 ]; then + echo >&2 "**Error**: $container: --grow should failed, but it completed successfuly" + exit 1 + fi + else + sleep 5 + check wait + sleep 5 + check wait + imsm_check member $member0 $num_disks $vol0_level $vol0_comp_size $((vol0_comp_size * vol0_new_num_comps)) $vol0_offset $vol0_chunk + testdev $member0 $vol0_new_num_comps $vol0_comp_size $vol0_chunk + if [ $vol1_new_num_comps -ne 0 ]; then + imsm_check member $member1 $num_disks $vol1_level $vol1_comp_size $((vol1_comp_size * vol1_new_num_comps)) $vol1_offset $vol1_chunk + testdev $member1 $vol1_new_num_comps $vol1_comp_size $vol1_chunk + fi + fi +fi + +exit 0 diff --git a/tests/utils b/tests/utils new file mode 100644 index 0000000..3acebd7 --- /dev/null +++ b/tests/utils @@ -0,0 +1,191 @@ +# set of functions used to test policy framework with assemble, incremental and Monitor + +set +e +#create links to be able to use domains +for d in 0 1 2 3 4 5 6 7 8 9 10 11 12 +do + eval ln -s \$dev$d /dev/disk/by-path/loop$d + eval d$d="loop$d" + eval mdadm --zero-superblock \$dev$d +done + +devices="/dev/loop[0-9] /dev/loop10 /dev/loop11 /dev/loop12" + +# on failure print out few things before exit +# uses testdsc and platform global variables +err(){ + echo >&2 "ERROR: $*" + cat $config >&2 || true + cat /proc/mdstat >&2 + [ -z "$testdsc" ] || { echo >&2 $platform: $testdsc "- failed"; } + ps -e | grep mdadm >&2 || true + if [ $listfailed == "yes" ]; then + [ "$verbose" != "yes" ] || echo ---FAILED--- + flist="$flist \n $platform $testdsc" + failed=1 + else + exit 1 + fi +} + +# set test description +dsc(){ + failed=0 + testdsc="$*" + [ "$verbose" != "yes" ] || echo $testdsc +} + +killmonitor(){ + [ -z "$monitorpid" ] || { kill -9 $monitorpid; unset monitorpid; } +} + +tidyup(){ + killmonitor + mdadm -Ss || true + mdadm -Ss + mdadm --zero-superblock $devices || true + udevadm settle + rm -f $config +} + +trap tidyup 0 1 2 3 15 + +# create a RAID 1 array or container and subarray(s) on 2 disks +# if platform not specified imsm is used +# if subsize is given, first subarray is created with given size and second one on remaining space +ccv(){ + # mddevno used to name created array + local mddevno="$1" + # numbers of devices to be used in array + local devno1="$2" + local devno2="$3" + local platform="$4" + local subsize="$5" + local onearray="$6" + [ -n "$platform" ] || platform="imsm" + if [ "$platform" == "imsm" ] || [ "$platform" == "ddf" ]; then + eval mdadm -CR /dev/md/con$mddevno -e $platform -n 2 \$dev$devno1 \$dev$devno2 + udevadm settle + [ -z "$subsize" ] || eval mdadm -CR sub$mddevno"_" -l 1 -n 2 /dev/md/con$mddevno -z $subsize + [ -n "$onearray" ] || eval mdadm -CR sub$mddevno -l 1 -n 2 /dev/md/con$mddevno + else + [ -z "$subsize" ] || sizepar="-z $subsize" + eval mdadm -CR arr$mddevno -e $platform -l 1 -n 2 \$dev$devno1 \$dev$devno2 $sizepar + unset sizepar + fi +} + +# get container and subarray using given device from mdstat +# sets global variables c and v +getarray(){ + local devname=`basename $1` + local platformtype=`grep -A 1 $devname /proc/mdstat | awk '/active/ {getline; print $4 }' | awk -F ":" 'END {print $1}'` + c=`grep "inactive.*$devname" /proc/mdstat | awk -F " " '{print $1}'` + v=`grep " active.*$devname" /proc/mdstat | awk -F " " '{print $1}'` + [ "$platformtype" == "external" ] || c=$v +} + +# check if given device belongs to any container and subarray +# if $2 given then only container checked +chkarray(){ + local devname="$1" + local subcheck="$2" + getarray $devname + [ -n "$c" ] || err "$devname not in any container" + [ -n "$subcheck" ] || [ -n "$v" ] || err " $devname not in subarray" +} + +# test if two devices in the same container/subarray +# $1 $2 - devices +# $3 don't check subarrays, only containers +tst(){ + local device1=`basename $1` + local device2=`basename $2` + local subcheck="$3" + chkarray $device1 $subcheck + local x="$c" + local y="$v" + chkarray $device2 $subcheck + [ "$c" == "$x" ] || err "$device1 and $device2 not in the same container" + [ -n "$subcheck" ] || [ "$v" == "$y" ] || err "$device1 and $device2 not in the same subarray" +} + +# same as tst, just use numbers of devices instead of names as parameters +dtst(){ + local devno1="$1" + local devno2="$2" + local subcheck="$3" + eval tst \$dev$devno1 \$dev$devno2 $subcheck +} + +# create containers/subarrays, check if created properly, +# set global variables c$mddevno v$mddevno, usually c0=md127, v0=md126 , etc. +setupdevs(){ + local mddevno="$1" + local devno1="$2" + local devno2="$3" + local p="$4" + local subsize="$5" + local onearray="$6" + [ -n "$p" ] || p=$platform + ccv $mddevno $devno1 $devno2 $p $subsize $onearray + dtst $devno1 $devno2 + eval c$mddevno=\"$c\" + eval v$mddevno=\"$v\" +} + +# check if given spare in container +# usage: chkspare container spare [n] (n if spare shouldn't be in container) +chkspare(){ + local container=`basename $1` + local spare=$2 + local expected=$3 + getarray $spare + [ -n "$expected" ] || expected="y" + if [ "$expected" == "y" ]; then + [ "$c" == "$container" ] || err "$spare not in container $container" + else + [ "$c" != "$container" ] || err "$spare in container $container" + fi +} + +#check if spare was moved from one container to another +# args: from_container to_container spare [yn] +# n when spare should remain in original container +chksparemoved(){ + sleep $sleeptime + from_container="$1" + to_container="$2" + spare="$3" + expected="$4" + [ -n "$expected" ] || expected="y" + notexpected="n"; [ "$expected" == "y" ] || notexpected="y" + chkspare $from_container $spare $notexpected + [ $failed -eq 1 ] || chkspare $to_container $spare $expected +} + + +# for domains defined through policy +createconfig(){ +if [ "$1" != "a" ]; then +{ + domain=$1 + metadata=$2 + action=$3 + while [ -n "$4" ]; do + echo="policy domain=$domain" + [ "$metadata" == "noplatform" ] || echo="$echo metadata=$metadata" + echo="$echo path=loop$4" + echo="$echo action=$action" + echo "$echo" + shift + done +} >> $config +else +{ + echo "DEVICES $devlist /dev/md1*" + mdadm -Ebs +} > $config +fi +#[ "$verbose" != "yes" ] || cat $config | grep policy || true +} |