Update upstream source from tag 'upstream/1.10.0+dfsg'

Update to upstream version '1.10.0+dfsg'
with Debian dir fa5485f3d9aea3038a19eff06ba33374ac5c5d7c

1 files changed, 173 insertions, 0 deletions

diff --git a/charts.d/libreswan.chart.sh b/charts.d/libreswan.chart.sh
new file mode 100644
index 00000000..30632e9c
--- /dev/null
+++ b/charts.d/libreswan.chart.sh
@@ -0,0 +1,173 @@
+# no need for shebang - this file is loaded from charts.d.plugin
+
+# netdata
+# real-time performance and health monitoring, done right!
+# (C) 2018 Costa Tsaousis <costa@tsaousis.gr>
+# GPL v3+
+#
+
+# _update_every is a special variable - it holds the number of seconds
+# between the calls of the _update() function
+libreswan_update_every=1
+
+# the priority is used to sort the charts on the dashboard
+# 1 = the first chart
+libreswan_priority=90000
+
+# set to 1, to run ipsec with sudo
+libreswan_sudo=1
+
+# global variables to store our collected data
+
+# [TUNNELID] = TUNNELNAME
+# here we track the *latest* established tunnels
+# as detected by: ipsec whack --status
+declare -A libreswan_connected_tunnels=()
+
+# [TUNNELID] = VALUE
+# here we track values of all established tunnels (not only the latest)
+# as detected by: ipsec whack --trafficstatus
+declare -A libreswan_traffic_in=()
+declare -A libreswan_traffic_out=()
+declare -A libreswan_established_add_time=()
+
+# [TUNNELNAME] = CHARTID
+# here we remember CHARTIDs of all tunnels
+# we need this to avoid converting tunnel names to chart IDs on every iteration
+declare -A libreswan_tunnel_charts=()
+
+# run the ipsec command
+libreswan_ipsec() {
+	if [ ${libreswan_sudo} -ne 0 ]
+		then
+		sudo -n "${IPSEC_CMD}" "${@}"
+		return $?
+	else
+		"${IPSEC_CMD}" "${@}"
+		return $?
+	fi
+}
+
+# fetch latest values - fill the arrays
+libreswan_get() {
+	# do all the work to collect / calculate the values
+	# for each dimension
+
+	# empty the variables
+	libreswan_traffic_in=()
+	libreswan_traffic_out=()
+	libreswan_established_add_time=()
+	libreswan_connected_tunnels=()
+
+	# convert the ipsec command output to a shell script
+	# and source it to get the values
+	source <(
+		{
+			libreswan_ipsec whack --status;
+			libreswan_ipsec whack --trafficstatus;
+		} | sed -n \
+				-e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\".*IPsec SA established.*newest IPSEC.*|libreswan_connected_tunnels[\"\1\"]=\"\2\"|p" \
+				-e "s|[0-9]\+ #\([0-9]\+\): \"\(.*\)\",.* add_time=\([0-9]\+\),.* inBytes=\([0-9]\+\),.* outBytes=\([0-9]\+\).*|libreswan_traffic_in[\"\1\"]=\"\4\"; libreswan_traffic_out[\"\1\"]=\"\5\"; libreswan_established_add_time[\"\1\"]=\"\3\";|p"
+	) || return 1
+
+	# check we got some data
+	[ ${#libreswan_connected_tunnels[@]} -eq 0 ] && return 1
+
+	return 0
+}
+
+# _check is called once, to find out if this chart should be enabled or not
+libreswan_check() {
+	# this should return:
+	#  - 0 to enable the chart
+	#  - 1 to disable the chart
+
+	require_cmd ipsec || return 1
+
+	# make sure it is libreswan
+	if [ -z "$(ipsec --version | grep -i libreswan)" ]
+	then
+	    error "ipsec command is not Libreswan. Disabling Libreswan plugin."
+	    return 1
+	fi
+
+	# check that we can collect data
+	libreswan_get || return 1
+
+	return 0
+}
+
+# create the charts for an ipsec tunnel
+libreswan_create_one() {
+	local n="${1}" name
+
+	name="${libreswan_connected_tunnels[${n}]}"
+
+	[ ! -z "${libreswan_tunnel_charts[${name}]}" ] && return 0
+
+	libreswan_tunnel_charts[${name}]="$(fixid "${name}")"
+
+	cat <<EOF
+CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every
+DIMENSION in '' incremental 8 1000
+DIMENSION out '' incremental -8 1000
+CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every
+DIMENSION uptime '' absolute 1 1
+EOF
+
+	return 0
+
+}
+
+# _create is called once, to create the charts
+libreswan_create() {
+	local n
+	for n in "${!libreswan_connected_tunnels[@]}"
+	do
+		libreswan_create_one "${n}"
+	done
+	return 0
+}
+
+libreswan_now=$(date +%s)
+
+# send the values to netdata for an ipsec tunnel
+libreswan_update_one() {
+	local n="${1}" microseconds="${2}" name id uptime
+
+	name="${libreswan_connected_tunnels[${n}]}"
+	id="${libreswan_tunnel_charts[${name}]}"
+
+	[ -z "${id}" ] && libreswan_create_one "${name}"
+
+	uptime=$(( ${libreswan_now} - ${libreswan_established_add_time[${n}]} ))
+	[ ${uptime} -lt 0 ] && uptime=0
+
+		# write the result of the work.
+	cat <<VALUESEOF
+BEGIN libreswan.${id}_net ${microseconds}
+SET in = ${libreswan_traffic_in[${n}]}
+SET out = ${libreswan_traffic_out[${n}]}
+END
+BEGIN libreswan.${id}_uptime ${microseconds}
+SET uptime = ${uptime}
+END
+VALUESEOF
+}
+
+# _update is called continiously, to collect the values
+libreswan_update() {
+	# the first argument to this function is the microseconds since last update
+	# pass this parameter to the BEGIN statement (see bellow).
+
+	libreswan_get || return 1
+	libreswan_now=$(date +%s)
+
+	local n
+	for n in "${!libreswan_connected_tunnels[@]}"
+	do
+		libreswan_update_one "${n}" "${@}"
+	done
+
+	return 0
+}