Merging upstream version 1.11.0+dfsg.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 250 deletions

diff --git a/charts.d/sensors.chart.sh b/charts.d/sensors.chart.sh
deleted file mode 100644
index f21248da1..000000000
--- a/charts.d/sensors.chart.sh
+++ /dev/null
@@ -1,250 +0,0 @@
-# no need for shebang - this file is loaded from charts.d.plugin
-
-# netdata
-# real-time performance and health monitoring, done right!
-# (C) 2016 Costa Tsaousis <costa@tsaousis.gr>
-# GPL v3+
-#
-
-# sensors docs
-# https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
-
-# if this chart is called X.chart.sh, then all functions and global variables
-# must start with X_
-
-# the directory the kernel keeps sensor data
-sensors_sys_dir="${NETDATA_HOST_PREFIX}/sys/devices"
-
-# how deep in the tree to check for sensor data
-sensors_sys_depth=10
-
-# if set to 1, the script will overwrite internal
-# script functions with code generated ones
-# leave to 1, is faster
-sensors_source_update=1
-
-# how frequently to collect sensor data
-# the default is to collect it at every iteration of charts.d
-sensors_update_every=
-
-sensors_priority=90000
-
-declare -A sensors_excluded=()
-
-sensors_find_all_files() {
-	find $1 -maxdepth $sensors_sys_depth -name \*_input -o -name temp 2>/dev/null
-}
-
-sensors_find_all_dirs() {
-	sensors_find_all_files $1 | while read
-	do
-		dirname $REPLY
-	done | sort -u
-}
-
-# _check is called once, to find out if this chart should be enabled or not
-sensors_check() {
-
-	# this should return:
-	#  - 0 to enable the chart
-	#  - 1 to disable the chart
-
-	[ -z "$( sensors_find_all_files $sensors_sys_dir )" ] && error "no sensors found in '$sensors_sys_dir'." && return 1
-	return 0
-}
-
-sensors_check_files() {
-	# we only need sensors that report a non-zero value
-	# also remove not needed sensors
-
-	local f= v= excluded=
-	for f in $*
-	do
-		[ ! -f "$f" ] && continue
-		for ex in ${sensors_excluded[@]}; do
-			[[ $f =~ .*$ex$ ]] && excluded='1' && break
-		done
-
-		[ "$excluded" != "1" ] && v="$( cat $f )" || v=0
-		v=$(( v + 1 - 1 ))
-		[ $v -ne 0 ] && echo "$f" && continue
-		excluded=
-
-		error "$f gives zero values"
-	done
-}
-
-sensors_check_temp_type() {
-	# valid temp types are 1 to 6
-	# disabled sensors have the value 0
-
-	local f= t= v=
-	for f in $*
-	do
-		t=$( echo $f | sed "s|_input$|_type|g" )
-		[ "$f" = "$t" ] && echo "$f" && continue
-		[ ! -f "$t" ] && echo "$f" && continue
-
-		v="$( cat $t )"
-		v=$(( v + 1 - 1 ))
-		[ $v -ne 0 ] && echo "$f" && continue
-
-		error "$f is disabled"
-	done
-}
-
-# _create is called once, to create the charts
-sensors_create() {
-	local path= dir= name= x= file= lfile= labelname= labelid= device= subsystem= id= type= mode= files= multiplier= divisor=
-
-	# we create a script with the source of the
-	# sensors_update() function
-	# - the highest speed we can achieve -
-	[ $sensors_source_update -eq 1 ] && echo >$TMP_DIR/sensors.sh "sensors_update() {"
-
-	for path in $( sensors_find_all_dirs $sensors_sys_dir | sort -u )
-	do
-		dir=$( basename $path )
-		device=
-		subsystem=
-		id=
-		type=
-		name=
-
-		[ -h $path/device ] && device=$( readlink -f $path/device )
-		[ ! -z "$device" ] && device=$( basename $device )
-		[ -z "$device" ] && device="$dir"
-
-		[ -h $path/subsystem ] && subsystem=$( readlink -f $path/subsystem )
-		[ ! -z "$subsystem" ] && subsystem=$( basename $subsystem )
-		[ -z "$subsystem" ] && subsystem="$dir"
-
-		[ -f $path/name ] && name=$( cat $path/name )
-		[ -z "$name" ] && name="$dir"
-
-		[ -f $path/type ] && type=$( cat $path/type )
-		[ -z "$type" ] && type="$dir"
-
-		id="$( fixid "$device.$subsystem.$dir" )"
-
-		debug "path='$path', dir='$dir', device='$device', subsystem='$subsystem', id='$id', name='$name'"
-
-		for mode in temperature voltage fans power current energy humidity
-		do
-			files=
-			multiplier=1
-			divisor=1
-			algorithm="absolute"
-
-			case $mode in
-				temperature)
-					files="$( ls $path/temp*_input 2>/dev/null; ls $path/temp 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					files="$( sensors_check_temp_type $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.temp_$id '' '$name Temperature' 'Celsius' 'temperature' 'sensors.temp' line $((sensors_priority + 1)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.temp_$id \$1\""
-					divisor=1000
-					;;
-
-				voltage)
-					files="$( ls $path/in*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.volt_$id '' '$name Voltage' 'Volts' 'voltage' 'sensors.volt' line $((sensors_priority + 2)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.volt_$id \$1\""
-					divisor=1000
-					;;
-
-				current)
-					files="$( ls $path/curr*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.curr_$id '' '$name Current' 'Ampere' 'current' 'sensors.curr' line $((sensors_priority + 3)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.curr_$id \$1\""
-					divisor=1000
-					;;
-
-				power)
-					files="$( ls $path/power*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.power_$id '' '$name Power' 'Watt' 'power' 'sensors.power' line $((sensors_priority + 4)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.power_$id \$1\""
-					divisor=1000000
-					;;
-
-				fans)
-					files="$( ls $path/fan*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.fan_$id '' '$name Fans Speed' 'Rotations / Minute' 'fans' 'sensors.fans' line $((sensors_priority + 5)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.fan_$id \$1\""
-					;;
-
-				energy)
-					files="$( ls $path/energy*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.energy_$id '' '$name Energy' 'Joule' 'energy' 'sensors.energy' areastack $((sensors_priority + 6)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.energy_$id \$1\""
-					algorithm="incremental"
-					divisor=1000000
-					;;
-
-				humidity)
-					files="$( ls $path/humidity*_input 2>/dev/null )"
-					files="$( sensors_check_files $files )"
-					[ -z "$files" ] && continue
-					echo "CHART sensors.humidity_$id '' '$name Humidity' 'Percent' 'humidity' 'sensors.humidity' line $((sensors_priority + 7)) $sensors_update_every"
-					echo >>$TMP_DIR/sensors.sh "echo \"BEGIN sensors.humidity_$id \$1\""
-					divisor=1000
-					;;
-
-				*)
-					continue
-					;;
-			esac
-
-			for x in $files
-			do
-				file="$x"
-				fid="$( fixid "$file" )"
-				lfile="$( basename $file | sed "s|_input$|_label|g" )"
-				labelname="$( basename $file | sed "s|_input$||g" )"
-
-				if [ ! "$path/$lfile" = "$file" -a -f "$path/$lfile" ]
-					then
-					labelname="$( cat "$path/$lfile" )"
-				fi
-
-				echo "DIMENSION $fid '$labelname' $algorithm $multiplier $divisor"
-				echo >>$TMP_DIR/sensors.sh "echo \"SET $fid = \"\$(< $file )"
-			done
-
-			echo >>$TMP_DIR/sensors.sh "echo END"
-		done
-	done
-
-	[ $sensors_source_update -eq 1 ] && echo >>$TMP_DIR/sensors.sh "}"
-
-	# ok, load the function sensors_update() we created
-	[ $sensors_source_update -eq 1 ] && . $TMP_DIR/sensors.sh
-
-	return 0
-}
-
-# _update is called continuously, to collect the values
-sensors_update() {
-	# the first argument to this function is the microseconds since last update
-	# pass this parameter to the BEGIN statement (see bellow).
-
-	# do all the work to collect / calculate the values
-	# for each dimension
-	# remember: KEEP IT SIMPLE AND SHORT
-
-	[ $sensors_source_update -eq 0 ] && . $TMP_DIR/sensors.sh $1
-
-	return 0
-}
-