New upstream version 1.11.0+dfsgupstream/1.11.0+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 84 insertions, 0 deletions

diff --git a/collectors/charts.d.plugin/ap/README.md b/collectors/charts.d.plugin/ap/README.md
new file mode 100644
index 000000000..eb4e80707
--- /dev/null
+++ b/collectors/charts.d.plugin/ap/README.md
@@ -0,0 +1,84 @@
+# Access Point Plugin (ap)
+
+The `ap` collector visualizes data related to access points.
+
+## Example netdata charts
+
+![image](https://cloud.githubusercontent.com/assets/2662304/12377654/9f566e88-bd2d-11e5-855a-e0ba96b8fd98.png)
+
+## How it works
+
+It does the following:
+
+1. Runs `iw dev` searching for interfaces that have `type AP`.
+
+   From the same output it collects the SSIDs each AP supports by looking for lines `ssid NAME`.
+
+   Example:
+```sh
+# iw dev
+phy#0
+        Interface wlan0
+                ifindex 3
+                wdev 0x1
+                addr 7c:dd:90:77:34:2a
+                ssid TSAOUSIS
+                type AP
+                channel 7 (2442 MHz), width: 20 MHz, center1: 2442 MHz
+```
+
+
+2. For each interface found, it runs `iw INTERFACE station dump`.
+
+   From the output is collects:
+
+   - rx/tx bytes
+   - rx/tx packets
+   - tx retries
+   - tx failed
+   - signal strength
+   - rx/tx bitrate
+   - expected throughput
+
+   Example:
+
+```sh
+# iw wlan0 station dump
+Station 40:b8:37:5a:ed:5e (on wlan0)
+        inactive time:  910 ms
+        rx bytes:       15588897
+        rx packets:     127772
+        tx bytes:       52257763
+        tx packets:     95802
+        tx retries:     2162
+        tx failed:      28
+        signal:         -43 dBm
+        signal avg:     -43 dBm
+        tx bitrate:     65.0 MBit/s MCS 7
+        rx bitrate:     1.0 MBit/s
+        expected throughput:    32.125Mbps
+        authorized:     yes
+        authenticated:  yes
+        preamble:       long
+        WMM/WME:        yes
+        MFP:            no
+        TDLS peer:      no
+```
+
+3. For each interface found, it creates 6 charts:
+
+   - Number of Connected clients
+   - Bandwidth for all clients
+   - Packets for all clients
+   - Transmit Issues for all clients
+   - Average Signal among all clients
+   - Average Bitrate (including average expected throughput) among all clients
+
+## Configuration
+
+You can only set `ap_update_every=NUMBER` to `/etc/netdata/charts.d/ap.conf`, to give the data collection frequency.
+To edit this file on your system run `/etc/netdata/edit-config charts.d/ap.conf`.
+
+## Auto-detection
+
+The plugin is able to auto-detect if you are running access points on your linux box.