Adding upstream version 1.43.0.upstream/1.43.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1 insertions, 104 deletions

diff --git a/collectors/charts.d.plugin/ap/README.md b/collectors/charts.d.plugin/ap/README.md
index 339ad1375..5b6e75130 100644..120000
--- a/collectors/charts.d.plugin/ap/README.md
+++ b/collectors/charts.d.plugin/ap/README.md
@@ -1,104 +1 @@
-<!--
-title: "Access point monitoring with Netdata"
-custom_edit_url: "https://github.com/netdata/netdata/edit/master/collectors/charts.d.plugin/ap/README.md"
-sidebar_label: "Access points"
-learn_status: "Published"
-learn_topic_type: "References"
-learn_rel_path: "Integrations/Monitor/Remotes/Devices"
--->
-
-# Access point collector
-
-The `ap` collector visualizes data related to access points.
-
-## Example Netdata charts
-
-![image](https://cloud.githubusercontent.com/assets/2662304/12377654/9f566e88-bd2d-11e5-855a-e0ba96b8fd98.png)
-
-## How it works
-
-It does the following:
-
-1.  Runs `iw dev` searching for interfaces that have `type AP`.
-
-    From the same output it collects the SSIDs each AP supports by looking for lines `ssid NAME`.
-
-    Example:
-
-```sh
-# iw dev
-phy#0
-        Interface wlan0
-                ifindex 3
-                wdev 0x1
-                addr 7c:dd:90:77:34:2a
-                ssid TSAOUSIS
-                type AP
-                channel 7 (2442 MHz), width: 20 MHz, center1: 2442 MHz
-```
-
-2.  For each interface found, it runs `iw INTERFACE station dump`.
-
-    From the output is collects:
-
-    -   rx/tx bytes
-    -   rx/tx packets
-    -   tx retries
-    -   tx failed
-    -   signal strength
-    -   rx/tx bitrate
-    -   expected throughput
-
-    Example:
-
-```sh
-# iw wlan0 station dump
-Station 40:b8:37:5a:ed:5e (on wlan0)
-        inactive time:  910 ms
-        rx bytes:       15588897
-        rx packets:     127772
-        tx bytes:       52257763
-        tx packets:     95802
-        tx retries:     2162
-        tx failed:      28
-        signal:         -43 dBm
-        signal avg:     -43 dBm
-        tx bitrate:     65.0 MBit/s MCS 7
-        rx bitrate:     1.0 MBit/s
-        expected throughput:    32.125Mbps
-        authorized:     yes
-        authenticated:  yes
-        preamble:       long
-        WMM/WME:        yes
-        MFP:            no
-        TDLS peer:      no
-```
-
-3.  For each interface found, it creates 6 charts:
-
-    -   Number of Connected clients
-    -   Bandwidth for all clients
-    -   Packets for all clients
-    -   Transmit Issues for all clients
-    -   Average Signal among all clients
-    -   Average Bitrate (including average expected throughput) among all clients
-
-## Configuration
-
-If using [our official native DEB/RPM packages](https://github.com/netdata/netdata/blob/master/packaging/installer/methods/packages.md), make sure `netdata-plugin-chartsd` is installed.
-
-Edit the `charts.d/ap.conf` configuration file using `edit-config` from the Netdata [config
-directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md), which is typically at `/etc/netdata`.
-
-```bash
-cd /etc/netdata   # Replace this path with your Netdata config directory, if different
-sudo ./edit-config charts.d/ap.conf
-```
-
-You can only set `ap_update_every=NUMBER` to change the data collection frequency.
-
-## Auto-detection
-
-The plugin is able to auto-detect if you are running access points on your linux box.
-
-
+integrations/access_points.md
\ No newline at end of file