New upstream version 1.11.0+dfsgupstream/1.11.0+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 0 insertions, 195 deletions

diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf
deleted file mode 100644
index c185f8d85..000000000
--- a/conf.d/python.d/web_log.conf
+++ /dev/null
@@ -1,195 +0,0 @@
-# netdata python.d.plugin configuration for web log
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-
-# ----------------------------------------------------------------------
-# PLUGIN CONFIGURATION
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, web_log also supports the following:
-#
-#     path: 'PATH'                        # the path to web server log file
-#     path: 'PATH[0-9]*[0-9]'             # log files with date suffix are also supported
-#     detailed_response_codes: yes/no     # default: yes. Additional chart where response codes are not grouped
-#     detailed_response_aggregate: yes/no # default: yes. Not aggregated detailed response codes charts
-#     all_time : yes/no                   # default: yes. All time unique client IPs chart (50000 addresses ~ 400KB)
-#     filter:                             # filter with regex
-#          include: 'REGEX'               # only those rows that matches the regex
-#          exclude: 'REGEX'               # all rows except those that matches the regex
-#     categories:                         # requests per url chart configuration
-#          cacti: 'cacti.*'               # name(dimension): REGEX to match
-#          observium: 'observium.*'       # name(dimension): REGEX to match
-#          stub_status: 'stub_status'     # name(dimension): REGEX to match
-#     user_defined:                       # requests per pattern in <user_defined> field (custom_log_format)
-#          cacti: 'cacti.*'               # name(dimension): REGEX to match
-#          observium: 'observium.*'       # name(dimension): REGEX to match
-#          stub_status: 'stub_status'     # name(dimension): REGEX to match
-#     custom_log_format:                  # define a custom log format
-#          pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d+\.\d+) '
-#          time_multiplier: 1000000       # type <int> - convert time to microseconds
-#     histogram: [1,3,10,30,100, ...]      # type list of int - Cumulative histogram of response time in milli seconds
-
-# ----------------------------------------------------------------------
-# WEB SERVER CONFIGURATION
-#
-# Make sure the web server log directory and the web server log files
-# can be read by user 'netdata'.
-#
-# To enable the timings chart and the requests size dimension, the
-# web server needs to log them. This is how to add them:
-#
-# nginx:
-#   log_format netdata '$remote_addr - $remote_user [$time_local] '
-#                      '"$request" $status $body_bytes_sent '
-#                      '$request_length $request_time $upstream_response_time '
-#                      '"$http_referer" "$http_user_agent"';
-#   access_log /var/log/nginx/access.log netdata;
-#
-# apache (you need mod_logio enabled):
-#   LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" vhost_netdata
-#   LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" netdata
-#   CustomLog "/var/log/apache2/access.log" netdata
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them per web server will run (when they have the same name)
-
-
-# -------------------------------------------
-# nginx log on various distros
-
-# debian, arch
-nginx_log:
-  name: 'nginx'
-  path: '/var/log/nginx/access.log'
-
-# gentoo
-nginx_log2:
-  name: 'nginx'
-  path: '/var/log/nginx/localhost.access_log'
-
-
-# -------------------------------------------
-# apache log on various distros
-
-# debian
-apache_log:
-  name: 'apache'
-  path: '/var/log/apache2/access.log'
-
-# gentoo
-apache_log2:
-  name: 'apache'
-  path: '/var/log/apache2/access_log'
-
-# arch
-apache_log3:
-  name: 'apache'
-  path: '/var/log/httpd/access_log'
-
-# debian
-apache_vhosts_log:
-  name: 'apache_vhosts'
-  path: '/var/log/apache2/other_vhosts_access.log'
-
-
-# -------------------------------------------
-# gunicorn log on various distros
-
-gunicorn_log:
-  name: 'gunicorn'
-  path: '/var/log/gunicorn/access.log'
-
-gunicorn_log2:
-  name: 'gunicorn'
-  path: '/var/log/gunicorn/gunicorn-access.log'
-
-# -------------------------------------------
-# Apache Cache
-apache_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/apache/cache.log'
-
-apache2_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/apache2/cache.log'
-
-httpd_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/httpd/cache.log'
-
-# -------------------------------------------
-# Squid
-
-# debian/ubuntu
-squid_log1:
-  name: 'squid'
-  type: 'squid'
-  path: '/var/log/squid3/access.log'
-
-#gentoo
-squid_log2:
-  name: 'squid'
-  type: 'squid'
-  path: '/var/log/squid/access.log'