summaryrefslogtreecommitdiffstats
path: root/conf.d/python.d
diff options
context:
space:
mode:
authorFederico Ceratto <federico.ceratto@gmail.com>2017-04-30 16:09:37 +0000
committerFederico Ceratto <federico.ceratto@gmail.com>2017-04-30 16:09:37 +0000
commit51f689a8e17ff3929acd2dbf39e936d2cd3ac723 (patch)
tree92e54f543171b69dcbc639be09d11221cf96ba28 /conf.d/python.d
parentNew upstream version 1.5.0+dfsg (diff)
downloadnetdata-51f689a8e17ff3929acd2dbf39e936d2cd3ac723.tar.xz
netdata-51f689a8e17ff3929acd2dbf39e936d2cd3ac723.zip
New upstream version 1.6.0+dfsgupstream/1.6.0+dfsg
Diffstat (limited to '')
-rw-r--r--conf.d/python.d.conf37
-rw-r--r--conf.d/python.d/elasticsearch.conf7
-rw-r--r--conf.d/python.d/fail2ban.conf19
-rw-r--r--conf.d/python.d/mongodb.conf (renamed from conf.d/python.d/gunicorn_log.conf)26
-rw-r--r--conf.d/python.d/nsd.conf (renamed from conf.d/python.d/nginx_log.conf)38
-rw-r--r--conf.d/python.d/smartd_log.conf85
-rw-r--r--conf.d/python.d/varnish.conf8
-rw-r--r--conf.d/python.d/web_log.conf147
8 files changed, 318 insertions, 49 deletions
diff --git a/conf.d/python.d.conf b/conf.d/python.d.conf
index 7e4fa801f..9ed346cdc 100644
--- a/conf.d/python.d.conf
+++ b/conf.d/python.d.conf
@@ -18,28 +18,53 @@ log_interval: 3600
# ----------------------------------------------------------------------
# Enable / Disable python.d.plugin modules
+#default_run: yes
#
-# The default for all modules is enabled (yes).
-# Setting any of these to no will disable it.
+# If "default_run" = "yes" the default for all modules is enabled (yes).
+# Setting any of these to "no" will disable it.
+#
+# If "default_run" = "no" the default for all modules is disabled (no).
+# Setting any of these to "yes" will enable it.
-# apache: yes
# apache_cache: yes
+# apache: yes
+# bind_rndc: yes
# cpufreq: yes
+# cpuidle: yes
# dovecot: yes
+# elasticsearch: yes
+
+# this is just an example
example: no
+
# exim: yes
+# fail2ban: yes
+# freeradius: yes
+
+# gunicorn_log has been replaced by web_log
+gunicorn_log: no
+
+# haproxy: yes
# hddtemp: yes
# ipfs: yes
# isc_dhcpd: yes
+# mdstat: yes
# memcached: yes
# mysql: yes
# nginx: yes
-# nginx_log: yes
+
+# nginx_log has been replaced by web_log
+nginx_log: no
+
+# ovpn_status_log: yes
# phpfpm: yes
# postfix: yes
+# postgres: yes
# redis: yes
+# retroshare: yes
# sensors: yes
+# smartd_log: yes
# squid: yes
# tomcat: yes
-# freeradius: yes
-# ovpn_status_log: yes
+# varnish: yes
+# web_log: yes
diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf
index 1faee8582..f98aaeced 100644
--- a/conf.d/python.d/elasticsearch.conf
+++ b/conf.d/python.d/elasticsearch.conf
@@ -62,6 +62,13 @@
# cluster_stats: False/True # Calls to cluster stats elasticsearch API. Enabled by default.
#
# ----------------------------------------------------------------------
+# IMPORTANT Information
+#
+# Module uses python `requests` package
+#
+# You need to install it manually. (python-requests or python3-requests depending on the version of python).
+#
+#
# AUTO-DETECTION JOBS
# only one of them will run (they have the same name)
#
diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf
index cd805be8d..d9664e353 100644
--- a/conf.d/python.d/fail2ban.conf
+++ b/conf.d/python.d/fail2ban.conf
@@ -56,22 +56,17 @@
#
# Additionally to the above, fail2ban also supports the following:
#
-# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log'
+# log_path: 'path to fail2ban.log' # Default: '/var/log/fail2ban.log'
# conf_path: 'path to jail.local/jail.conf' # Default: '/etc/fail2ban/jail.local'
-# exclude: 'jails you want to exclude from autodetection' # Default: '[]' empty list
+# conf_dir: 'path to jail.d/' # Default: '' empty
+# exclude: 'jails you want to exclude from autodetection' # Default: '[]' empty list
#------------------------------------------------------------------------------------------------------------------
-# IMPORTANT Information
-#
-# fail2ban.log file MUST BE readable by netdata.
-# A good idea is to do this by adding the
-# # create 0640 root netdata
-# to fail2ban conf at logrotate.d
-#
# ------------------------------------------------------------------------------------------------------------------
# AUTO-DETECTION JOBS
# only one of them will run (they have the same name)
-#local:
-# log_path: '/var/log/fail2ban.log'
-# conf_path: '/etc/fail2ban/jail.local'
+local:
+ log_path: '/var/log/fail2ban.log'
+ conf_path: '/etc/fail2ban/jail.local'
+# conf_dir: '/etc/fail2ban/jail.d/'
# exclude: 'dropbear apache'
diff --git a/conf.d/python.d/gunicorn_log.conf b/conf.d/python.d/mongodb.conf
index 8fea483f0..a19b6570b 100644
--- a/conf.d/python.d/gunicorn_log.conf
+++ b/conf.d/python.d/mongodb.conf
@@ -1,4 +1,4 @@
-# netdata python.d.plugin configuration for nginx gunicorn log
+# netdata python.d.plugin configuration for mongodb
#
# This file is in YaML format. Generally the format is:
#
@@ -54,20 +54,24 @@
# priority: 60000 # the JOB's order on the dashboard
# retries: 5 # the JOB's number of restoration attempts
#
-# Additionally to the above, gunicorn_log also supports the following:
+# Additionally to the above, mongodb also supports the following:
#
-# path: 'PATH' # the path to gunicorn's access.log
+# host: 'IP or HOSTNAME' # type <str> the host to connect to
+# port: PORT # type <int> the port to connect to
+#
+# in all cases, the following can also be set:
+#
+# user: 'username' # the mongodb username to use
+# pass: 'password' # the mongodb password to use
#
# ----------------------------------------------------------------------
+# to connect to the mongodb on localhost, without a password:
+# ----------------------------------------------------------------------
# AUTO-DETECTION JOBS
# only one of them will run (they have the same name)
-gunicorn_log:
- name: 'local'
- path: '/var/log/gunicorn/access.log'
-
-gunicorn_log2:
- name: 'local'
- path: '/var/log/gunicorn/gunicorn-access.log'
-
+local:
+ name : 'local'
+ host : '127.0.0.1'
+ port : 27017
diff --git a/conf.d/python.d/nginx_log.conf b/conf.d/python.d/nsd.conf
index 6a53c5204..7566fe85e 100644
--- a/conf.d/python.d/nginx_log.conf
+++ b/conf.d/python.d/nsd.conf
@@ -1,4 +1,4 @@
-# netdata python.d.plugin configuration for nginx log
+# netdata python.d.plugin configuration for nsd
#
# This file is in YaML format. Generally the format is:
#
@@ -20,7 +20,8 @@
# update_every sets the default data collection frequency.
# If unset, the python.d.plugin default is used.
-# update_every: 1
+# nsd-control is slow, so once every 30 seconds
+# update_every: 30
# priority controls the order of charts at the netdata dashboard.
# Lower numbers move the charts towards the top of the page.
@@ -54,19 +55,32 @@
# priority: 60000 # the JOB's order on the dashboard
# retries: 5 # the JOB's number of restoration attempts
#
-# Additionally to the above, nginx_log also supports the following:
+# Additionally to the above, nsd also supports the following:
#
-# path: 'PATH' # the path to nginx's access.log
+# command: 'nsd-control stats_noreset' # the command to run
#
# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
+# IMPORTANT Information
+#
+# Netdata must have permissions to run `nsd-control stats_noreset` command
+#
+# - Example-1 (use "sudo")
+# 1. sudoers (e.g. visudo -f /etc/sudoers.d/netdata)
+# Defaults:netdata !requiretty
+# netdata ALL=(ALL) NOPASSWD: /usr/sbin/nsd-control stats_noreset
+# 2. etc/netdata/python.d/nsd.conf
+# local:
+# update_every: 30
+# command: 'sudo /usr/sbin/nsd-control stats_noreset'
+#
+# - Example-2 (add "netdata" user to "nsd" group)
+# usermod -aG nsd netdata
+#
-nginx_log:
- name: 'local'
- path: '/var/log/nginx/access.log'
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
-nginx_log2:
- name: 'local'
- path: '/var/log/nginx/nginx-access.log'
+local:
+ update_every: 30
+ command: 'nsd-control stats_noreset'
diff --git a/conf.d/python.d/smartd_log.conf b/conf.d/python.d/smartd_log.conf
new file mode 100644
index 000000000..e16454dfb
--- /dev/null
+++ b/conf.d/python.d/smartd_log.conf
@@ -0,0 +1,85 @@
+# netdata python.d.plugin configuration for smartd log
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+# - global variables
+# - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+# name: myname # the JOB's name as it will appear at the
+# # dashboard (by default is the job_name)
+# # JOBs sharing a name are mutually exclusive
+# update_every: 1 # the JOB's data collection frequency
+# priority: 60000 # the JOB's order on the dashboard
+# retries: 5 # the JOB's number of restoration attempts
+#
+# Additionally to the above, smartd_log also supports the following:
+#
+# log_path: '/path/to/smartdlogs' # path to smartd log files. Default is /var/log/smartd
+# raw_values: no # raw or normalized values on charts. Default is normalized.
+# smart_attributes: '1 2 3 4 44' # add additional smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200'].
+#
+# ----------------------------------------------------------------------
+# Additional information
+# Plugin reads smartd log files (-A option).
+# You need to add (man smartd) to /etc/default/smartmontools '-i 600 -A /var/log/smartd/' to pass additional options to smartd on startup
+# Then restart smartd service and check /path/log/smartdlogs
+# ls /var/log/smartd/
+# CDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv WDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv ZDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv
+#
+# Smartd APPEND logs at every run. Its NOT RECOMMENDED to set '-i' option below 60 sec.
+# STRONGLY RECOMMENDED to create smartd conf file for logrotate
+#
+# RAW vs NORMALIZED values
+# "Normalized value", commonly referred to as just "value". This is a most universal measurement, on the scale from 0 (bad) to some maximum (good) value.
+# Maximum values are typically 100, 200 or 253. Rule of thumb is: high values are good, low values are bad.
+#
+# "Raw value" - the value of the attribute as it is tracked by the device, before any normalization takes place.
+# Some raw numbers provide valuable insight when properly interpreted. These cases will be discussed later on.
+# Raw values are typically listed in hexadecimal numbers. The raw value has different structure for different vendors and is often not meaningful as a decimal number.
+#
+#
+# JOB configuration
+#
+log_path: '/var/log/smartd'
diff --git a/conf.d/python.d/varnish.conf b/conf.d/python.d/varnish.conf
index 56dc6334d..c25f3010f 100644
--- a/conf.d/python.d/varnish.conf
+++ b/conf.d/python.d/varnish.conf
@@ -55,11 +55,3 @@
# retries: 5 # the JOB's number of restoration attempts
#
#
-#
-# The only you need is to add netdata to 'varnish' group
-#
-# Check it from cmd
-# id netdata
-#
-# uid=999(netdata) gid=999(netdata) группы=999(netdata),118(varnish)
-#
diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf
new file mode 100644
index 000000000..06656285f
--- /dev/null
+++ b/conf.d/python.d/web_log.conf
@@ -0,0 +1,147 @@
+# netdata python.d.plugin configuration for web log
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+# - global variables
+# - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+
+# ----------------------------------------------------------------------
+# PLUGIN CONFIGURATION
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+# name: myname # the JOB's name as it will appear at the
+# # dashboard (by default is the job_name)
+# # JOBs sharing a name are mutually exclusive
+# update_every: 1 # the JOB's data collection frequency
+# priority: 60000 # the JOB's order on the dashboard
+# retries: 5 # the JOB's number of restoration attempts
+#
+# Additionally to the above, web_log also supports the following:
+#
+# path: 'PATH' # the path to web server log file
+# detailed_response_codes: yes/no # Default: yes. Additional chart where response codes are not grouped
+# detailed_response_aggregate: yes/no # Default: yes. Not aggregated detailed response codes charts
+# all_time : yes/no # Default: yes. All time unique client IPs chart (50000 addresses ~ 400KB)
+# categories: # requests per url chart configuration
+# cacti: 'cacti.*' # name(dimension): REGEX to match
+# observium: 'observium.*' # name(dimension): REGEX to match
+# stub_status: 'stub_status' # name(dimension): REGEX to match
+# custom_log_format: # define a custom log format
+# pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d\.\d+) '
+# time_multiplier: 1000000 # type <int> - convert time to microseconds
+
+# ----------------------------------------------------------------------
+# WEB SERVER CONFIGURATION
+#
+# Make sure the web server log directory and the web server log files
+# can be read by user 'netdata'.
+#
+# To enable the timings chart and the requests size dimension, the
+# web server needs to log them. This is how to add them:
+#
+# nginx:
+# log_format netdata '$remote_addr - $remote_user [$time_local] '
+# '"$request" $status $body_bytes_sent '
+# '$request_length $request_time '
+# '"$http_referer" "$http_user_agent"';
+# access_log /var/log/nginx/access.log netdata;
+#
+# apache (you need mod_logio enabled):
+# LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" vhost_netdata
+# LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" netdata
+# CustomLog "/var/log/apache2/access.log" netdata
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them per web server will run (when they have the same name)
+
+
+# -------------------------------------------
+# nginx log on various distros
+
+# debian, arch
+nginx_log:
+ name: 'nginx'
+ path: '/var/log/nginx/access.log'
+
+# gentoo
+nginx_log2:
+ name: 'nginx'
+ path: '/var/log/nginx/localhost.access_log'
+
+
+# -------------------------------------------
+# apache log on various distros
+
+# debian
+apache_log:
+ name: 'apache'
+ path: '/var/log/apache2/access.log'
+
+# gentoo
+apache_log2:
+ name: 'apache'
+ path: '/var/log/apache2/access_log'
+
+# arch
+apache_log3:
+ name: 'apache'
+ path: '/var/log/httpd/access_log'
+
+# debian
+apache_vhosts_log:
+ name: 'apache_vhosts'
+ path: '/var/log/apache2/other_vhosts_access.log'
+
+
+# -------------------------------------------
+# gunicorn log on various distros
+
+gunicorn_log:
+ name: 'gunicorn'
+ path: '/var/log/gunicorn/access.log'
+
+gunicorn_log2:
+ name: 'gunicorn'
+ path: '/var/log/gunicorn/gunicorn-access.log'