New upstream version 1.10.0+dfsgupstream/1.10.0+dfsg

12 files changed, 732 insertions, 6 deletions

diff --git a/conf.d/python.d.conf b/conf.d/python.d.conf
index 2c3d400c..bb57738b 100644
--- a/conf.d/python.d.conf
+++ b/conf.d/python.d.conf
@@ -15,7 +15,7 @@ enabled: yes
 #
 # If "default_run" = "yes" the default for all modules is enabled (yes).
 # Setting any of these to "no" will disable it.
-# 
+#
 # If "default_run" = "no" the default for all modules is disabled (no).
 # Setting any of these to "yes" will enable it.
 
@@ -24,6 +24,7 @@ apache_cache: no
 # apache: yes
 # beanstalk: yes
 # bind_rndc: yes
+# ceph: yes
 chrony: no
 # couchdb: yes
 # cpufreq: yes
@@ -45,6 +46,7 @@ gunicorn_log: no
 go_expvar: no
 # haproxy: yes
 # hddtemp: yes
+# icecast: yes
 # ipfs: yes
 # isc_dhcpd: yes
 # mdstat: yes
@@ -52,11 +54,13 @@ go_expvar: no
 # mongodb: yes
 # mysql: yes
 # nginx: yes
+# nginx_plus: yes
 # nsd: yes
+# ntpd: yes
 
 # nginx_log has been replaced by web_log
 nginx_log: no
-
+# ntpd: yes
 # ovpn_status_log: yes
 # phpfpm: yes
 # postfix: yes
@@ -69,6 +73,7 @@ nginx_log: no
 # samba: yes
 # smartd_log: yes
 # squid: yes
+# springboot: yes
 # tomcat: yes
 # varnish: yes
 # web_log: yes
diff --git a/conf.d/python.d/ceph.conf b/conf.d/python.d/ceph.conf
new file mode 100644
index 00000000..78ac1e25
--- /dev/null
+++ b/conf.d/python.d/ceph.conf
@@ -0,0 +1,75 @@
+# netdata python.d.plugin configuration for ceph stats
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 10
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 10         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     retries: 60             # the JOB's number of restoration attempts
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, ceph plugin also supports the following:
+#
+#     config_file: 'config_file'       # Ceph config file.
+#     keyring_file: 'keyring_file'     # Ceph keyring file. netdata user must be added into ceph group
+#                                      # and keyring file must be read group permission.
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+#
+config_file: '/etc/ceph/ceph.conf'
+keyring_file: '/etc/ceph/ceph.client.admin.keyring'
+
diff --git a/conf.d/python.d/httpcheck.conf b/conf.d/python.d/httpcheck.conf
new file mode 100644
index 00000000..058e057a
--- /dev/null
+++ b/conf.d/python.d/httpcheck.conf
@@ -0,0 +1,99 @@
+# netdata python.d.plugin configuration for httpcheck
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the httpcheck default is used, which is at 3 seconds.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# chart_cleanup sets the default chart cleanup interval in iterations.
+# A chart is marked as obsolete if it has not been updated
+# 'chart_cleanup' iterations in a row.
+# They will be hidden immediately (not offered to dashboard viewer,
+# streamed upstream and archived to backends) and deleted one hour
+# later (configurable from netdata.conf).
+# -- For this plugin, cleanup MUST be disabled, otherwise we lose response
+#    time charts
+chart_cleanup: 0
+
+# Autodetection and retries do not work for this plugin
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# -------------------------------
+# ATTENTION: Any valid configuration will be accepted, even if initial connection fails!
+# -------------------------------
+#
+# There is intentionally no default config, e.g. for 'localhost'
+
+# job_name:
+#     name: myname            # [optional] the JOB's name as it will appear at the
+#                             #   dashboard (by default is the job_name)
+#                             #   JOBs sharing a name are mutually exclusive
+#     update_every: 3         # [optional] the JOB's data collection frequency
+#     priority: 60000         # [optional] the JOB's order on the dashboard
+#     retries: 60             # [optional] the JOB's number of restoration attempts
+#     timeout: 1              # [optional] the timeout when connecting, supports decimals (e.g. 0.5s)
+#     url: 'http[s]://host-ip-or-dns[:port][path]'
+#                             # [required] the remote host url to connect to. If [:port] is missing, it defaults to 80
+#                             #   for HTTP and 443 for HTTPS. [path] is optional too, defaults to /
+#     redirect: yes           # [optional] If the remote host returns 3xx status codes, the redirection url will be
+#                             #   followed (default).
+#     status_accepted:        # [optional] By default, 200 is accepted. Anything else will result in 'bad status' in the
+#                             #   status chart, however: The response time will still be > 0, since the
+#                             #   host responded with something.
+#                             #   If redirect is enabled, the accepted status will be checked against the redirected page.
+#       - 200                 # Multiple status codes are possible. If you specify 'status_accepted', you would still
+#                             #   need to add '200'. E.g. 'status_accepted: [301]' will trigger an error in 'bad status'
+#                             #   if code is 200. Do specify numerical entries such as 200, not 'OK'.
+#     regex: None             # [optional] If the status code is accepted, the content of the response will be searched for this
+#                             #   regex (if defined). Be aware that you may need to escape the regex string. If redirect is enabled,
+#                             #   the regex will be matched to the redirected page, not the initial 3xx response.
+
+# Simple example:
+#
+# jira:
+#   url: 'https://jira.localdomain/'
+
+
+# Complex example:
+#
+# cool_website:
+#   url: 'http://cool.website:8080/home'
+#   status_accepted:
+#     - 200
+#     - 204
+#   regex: <title>My cool website!<\/title>
+#   timeout: 2
+
+# This plugin is intended for simple cases. Currently, the accuracy of the response time is low and should be used as reference only.
+
diff --git a/conf.d/python.d/icecast.conf b/conf.d/python.d/icecast.conf
new file mode 100644
index 00000000..a900d06d
--- /dev/null
+++ b/conf.d/python.d/icecast.conf
@@ -0,0 +1,83 @@
+# netdata python.d.plugin configuration for icecast
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     retries: 60             # the JOB's number of restoration attempts
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, icecast also supports the following:
+#
+#     url: 'URL'       # the URL to fetch icecast's stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost:8443/status-json.xsl'
+
+localipv4:
+  name : 'local'
+  url  : 'http://127.0.0.1:8443/status-json.xsl'
\ No newline at end of file
diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf
index def9f7e9..b5956a2c 100644
--- a/conf.d/python.d/mysql.conf
+++ b/conf.d/python.d/mysql.conf
@@ -85,12 +85,19 @@
 # to connect to the mysql server on localhost, without a password:
 #
 # > create user 'netdata'@'localhost';
-# > grant usage on *.* to 'netdata'@'localhost' with grant option;
+# > grant usage on *.* to 'netdata'@'localhost';
 # > flush privileges;
 #
 # with the above statements, netdata will be able to gather mysql
 # statistics, without the ability to see or alter any data or affect
 # mysql operation in any way. No change is required below.
+#
+# If you need to monitor mysql replication too, use this instead:
+#
+# > create user 'netdata'@'localhost';
+# > grant replication client on *.* to 'netdata'@'localhost';
+# > flush privileges;
+#
 
 # ----------------------------------------------------------------------
 # AUTO-DETECTION JOBS
diff --git a/conf.d/python.d/nginx_plus.conf b/conf.d/python.d/nginx_plus.conf
new file mode 100644
index 00000000..7b5c8f43
--- /dev/null
+++ b/conf.d/python.d/nginx_plus.conf
@@ -0,0 +1,87 @@
+# netdata python.d.plugin configuration for nginx_plus
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     retries: 60             # the JOB's number of restoration attempts
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, nginx_plus also supports the following:
+#
+#     url: 'URL'       # the URL to fetch nginx_plus's stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost/status'
+
+localipv4:
+  name : 'local'
+  url  : 'http://127.0.0.1/status'
+
+localipv6:
+  name : 'local'
+  url  : 'http://[::1]/status'
diff --git a/conf.d/python.d/ntpd.conf b/conf.d/python.d/ntpd.conf
new file mode 100644
index 00000000..7adc4074
--- /dev/null
+++ b/conf.d/python.d/ntpd.conf
@@ -0,0 +1,91 @@
+# netdata python.d.plugin configuration for ntpd
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 60      # the JOB's number of restoration attempts
+#
+# Additionally to the above, ntp also supports the following:
+#
+# host: 'localhost'       # the host to query
+# port: '123'             # the UDP port where `ntpd` listens
+# show_peers: no          # use `yes` to show peer charts. enabling this
+#                         # option is recommended only for debugging, as
+#                         # it could possibly imply memory leaks if the
+#                         # peers change frequently.
+# peer_filter: '127\..*'  # regex to exclude peers
+#                         # by default local peers are hidden
+#                         # use `''` to show all peers.
+# peer_rescan: 60         # interval (>0) to check for new/changed peers
+#                         # use `1` to check on every update
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name: 'local'
+  host: 'localhost'
+  port: '123'
+  show_peers: no
+
+localhost_ipv4:
+  name: 'local'
+  host: '127.0.0.1'
+  port: '123'
+  show_peers: no
+
+localhost_ipv6:
+  name: 'local'
+  host: '::1'
+  port: '123'
+  show_peers: no
diff --git a/conf.d/python.d/portcheck.conf b/conf.d/python.d/portcheck.conf
new file mode 100644
index 00000000..b3dd8bd3
--- /dev/null
+++ b/conf.d/python.d/portcheck.conf
@@ -0,0 +1,70 @@
+# netdata python.d.plugin configuration for portcheck
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# chart_cleanup sets the default chart cleanup interval in iterations.
+# A chart is marked as obsolete if it has not been updated
+# 'chart_cleanup' iterations in a row.
+# They will be hidden immediately (not offered to dashboard viewer,
+# streamed upstream and archived to backends) and deleted one hour
+# later (configurable from netdata.conf).
+# -- For this plugin, cleanup MUST be disabled, otherwise we lose latency chart
+chart_cleanup: 0
+
+# Autodetection and retries do not work for this plugin
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# -------------------------------
+# ATTENTION: Any valid configuration will be accepted, even if initial connection fails!
+# -------------------------------
+#
+# There is intentionally no default config for 'localhost'
+
+# job_name:
+#     name: myname            # [optional] the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # [optional] the JOB's data collection frequency
+#     priority: 60000         # [optional] the JOB's order on the dashboard
+#     retries: 60             # [optional] the JOB's number of restoration attempts
+#     timeout: 1              # [optional] the socket timeout when connecting
+#     host: 'dns or ip'       # [required] the remote host address in either IPv4, IPv6 or as DNS name.
+#     port: 22                # [required] the port number to check. Specify an integer, not service name.
+
+# You just have been warned about possible portscan blocking. The portcheck plugin is meant for simple use cases.
+# Currently, the accuracy of the latency is low and should be used as reference only.
+
diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf
index 3a70a718..b69ca371 100644
--- a/conf.d/python.d/postgres.conf
+++ b/conf.d/python.d/postgres.conf
@@ -82,9 +82,18 @@
 # a postgres user for netdata and add its password below to allow
 # netdata connect.
 #
-# Without superuser access, netdata won't be able to generate the write
-# ahead log and the background writer charts.
-#
+# Postgres supported versions are : 
+# - 9.3 (without autovacuum)
+# - 9.4
+# - 9.5
+# - 9.6
+# - 10
+#
+# Superuser access is needed for theses charts:
+#   Write-Ahead Logs
+#   Archive Write-Ahead Logs
+#
+# Autovacuum charts is allowed since Postgres 9.4
 # ----------------------------------------------------------------------
 
 socket:
diff --git a/conf.d/python.d/springboot.conf b/conf.d/python.d/springboot.conf
new file mode 100644
index 00000000..40b5fb43
--- /dev/null
+++ b/conf.d/python.d/springboot.conf
@@ -0,0 +1,120 @@
+# netdata python.d.plugin configuration for springboot
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     retries: 60             # the JOB's number of restoration attempts
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, this plugin also supports the following:
+#
+#     url: 'http://127.0.0.1/metrics'       # the URL of the spring boot actuator metrics
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+#     defaults:
+#       [chart_id]: true | false    # enables/disables default charts, defaults true.
+#     extras: {}              # defines extra charts to monitor, please see the example below
+#     - id: [chart_id]
+#       options: {}
+#       lines: []
+#
+# If all defaults is disabled and no extra charts are defined, this module will disable itself, as it has no data to
+# collect.
+#
+# Configuration example
+# ---------------------
+# expample:
+#   name: 'example'
+#   url: 'http://localhost:8080/metrics'
+#   defaults:
+#     response_code: true
+#     threads: true
+#     gc_time: true
+#     gc_ope: true
+#     heap: false
+#   extras:
+#   - id: 'heap'
+#     options: { title: 'Heap Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap', charttype: 'stacked' }
+#     lines:
+#     - { dimension: 'mem_free',              name: 'free'}
+#     - { dimension: 'mempool_eden_used',     name: 'eden',     algorithm: 'absolute', multiplier: 1, divisor: 1}
+#     - { dimension: 'mempool_survivor_used', name: 'survivor', algorithm: 'absolute', multiplier: 1, divisor: 1}
+#     - { dimension: 'mempool_tenured_used',  name: 'tenured',  algorithm: 'absolute', multiplier: 1, divisor: 1}
+#   - id: 'heap_eden'
+#     options: { title: 'Eden Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_eden', charttype: 'area' }
+#     lines:
+#     - { dimension: 'mempool_eden_used',      name: 'used'}
+#     - { dimension: 'mempool_eden_committed', name: 'commited'}
+#   - id: 'heap_survivor'
+#     options: { title: 'Survivor Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_survivor', charttype: 'area' }
+#     lines:
+#     - { dimension: 'mempool_survivor_used',      name: 'used'}
+#     - { dimension: 'mempool_survivor_committed', name: 'commited'}
+#   - id: 'heap_tenured'
+#     options: { title: 'Tenured Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_tenured', charttype: 'area' }
+#     lines:
+#     - { dimension: 'mempool_tenured_used',      name: 'used'}
+#     - { dimension: 'mempool_tenured_committed', name: 'commited'}
+
+
+local:
+  name: 'local'
+  url: 'http://localhost:8080/metrics'
+
+local_ip:
+  name: 'local'
+  url: 'http://127.0.0.1:8080/metrics'
diff --git a/conf.d/python.d/traefik.conf b/conf.d/python.d/traefik.conf
new file mode 100644
index 00000000..909b9e54
--- /dev/null
+++ b/conf.d/python.d/traefik.conf
@@ -0,0 +1,79 @@
+# netdata python.d.plugin configuration for traefik health data API
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 60
+
+# autodetection_retry sets the job re-check interval in seconds.
+# The job is not deleted if check fails.
+# Attempts to start the job are made once every autodetection_retry.
+# This feature is disabled by default.
+# autodetection_retry: 0
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname            # the JOB's name as it will appear at the
+#                             # dashboard (by default is the job_name)
+#                             # JOBs sharing a name are mutually exclusive
+#     update_every: 1         # the JOB's data collection frequency
+#     priority: 60000         # the JOB's order on the dashboard
+#     retries: 10             # the JOB's number of restoration attempts
+#     autodetection_retry: 0  # the JOB's re-check interval in seconds
+#
+# Additionally to the above, traefik plugin also supports the following:
+#
+#     url: '<scheme>://<host>:<port>/<health_page_api>'
+#     # http://localhost:8080/health
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+#
+local:
+ url: 'http://localhost:8080/health'
diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf
index dd1fff07..c185f8d8 100644
--- a/conf.d/python.d/web_log.conf
+++ b/conf.d/python.d/web_log.conf
@@ -85,6 +85,7 @@
 #     custom_log_format:                  # define a custom log format
 #          pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d+\.\d+) '
 #          time_multiplier: 1000000       # type <int> - convert time to microseconds
+#     histogram: [1,3,10,30,100, ...]      # type list of int - Cumulative histogram of response time in milli seconds
 
 # ----------------------------------------------------------------------
 # WEB SERVER CONFIGURATION