Updated version 1.7.0+dfsg from 'upstream/1.7.0+dfsg'

with Debian dir e101ee6549c6786aab4b3f5c4f9bbb7638f17e34

10 files changed, 376 insertions, 31 deletions

diff --git a/conf.d/python.d/dns_query_time.conf b/conf.d/python.d/dns_query_time.conf
new file mode 100644
index 00000000..f4d4dbf9
--- /dev/null
+++ b/conf.d/python.d/dns_query_time.conf
@@ -0,0 +1,72 @@
+# netdata python.d.plugin configuration for dns_query_time
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, dns_query_time also supports the following:
+#
+#     dns_servers: 'dns servers'       # list of dns servers to query
+#     domains: 'domains'               # list of domains
+#     aggregate: yes/no                # Default: yes. Aggregate all servers in one chart or not
+#     response_timeout: 4              # Defalt: 4. Dns query response timeout (query = -100 if response time > response_time)
+#
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+#
+#
+#aggregate: yes
+#dns_servers: '8.8.8.8 8.8.4.4'
+#domains: 'python.org distrowatch.com linuxmint.com linux.com rsyslog.com liblognorm.com archlinux.org cisco.com debian.org kernel.org gns3.com opera.com github.com youtube.com amazon.co.uk kde.org netdata.firehol.org ubuntu.com redhat.com opensuse.org wireshark.org vmware.com microsoft.com elastic.co'
diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf
index f98aaece..7c35df22 100644
--- a/conf.d/python.d/elasticsearch.conf
+++ b/conf.d/python.d/elasticsearch.conf
@@ -61,19 +61,16 @@
 #     cluster_health: False/True       # Calls to cluster health elasticsearch API. Enabled by default.
 #     cluster_stats: False/True        # Calls to cluster stats elasticsearch API. Enabled by default.
 #
-# ----------------------------------------------------------------------
-# IMPORTANT Information
-#
-# Module uses python `requests` package
 #
-# You need to install it manually. (python-requests or python3-requests depending on the version of python).
+# if the URL is password protected, the following are supported:
 #
+#     user: 'username'
+#     pass: 'password'
 #
+# ----------------------------------------------------------------------
 # AUTO-DETECTION JOBS
 # only one of them will run (they have the same name)
 #
-#local:
-# host: '127.0.0.1'
-# port: '9200'
-# cluster_health: True
-# cluster_stats: True
+local:
+ host: '127.0.0.1'
+ port: '9200'
diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf
index d9664e35..76277108 100644
--- a/conf.d/python.d/fail2ban.conf
+++ b/conf.d/python.d/fail2ban.conf
@@ -58,15 +58,6 @@
 #
 #     log_path:  'path to fail2ban.log'			        # Default: '/var/log/fail2ban.log'
 #     conf_path: 'path to jail.local/jail.conf'			# Default: '/etc/fail2ban/jail.local'
-#     conf_dir:  'path to jail.d/'			        # Default: '' empty
+#     conf_dir:  'path to jail.d/'			        # Default: '/etc/fail2ban/jail.d/'
 #     exclude:   'jails you want to exclude from autodetection'	# Default: '[]' empty list
 #------------------------------------------------------------------------------------------------------------------
-# ------------------------------------------------------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-local:
- log_path: '/var/log/fail2ban.log'
- conf_path: '/etc/fail2ban/jail.local'
-# conf_dir: '/etc/fail2ban/jail.d/'
-# exclude: 'dropbear apache'
diff --git a/conf.d/python.d/go_expvar.conf b/conf.d/python.d/go_expvar.conf
new file mode 100644
index 00000000..5be4890d
--- /dev/null
+++ b/conf.d/python.d/go_expvar.conf
@@ -0,0 +1,106 @@
+# netdata python.d.plugin configuration for go_expvar
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: my_name    # the JOB's name as it will appear at the
+#                      # dashboard. If name: is not supplied the
+#                      # job_name: will be used (use _ for spaces)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, this plugin also supports the following:
+#
+#     url: 'http://127.0.0.1/debug/vars'       # the URL of the expvar endpoint
+#     ss_cert:                                 # ignore HTTPS self-signed certificate
+#     proxy:                                   # use HTTP proxy
+#
+# As the plugin cannot possibly know the port your application listens on, there is no default value. Please include
+# the whole path of the endpoint, as the expvar handler can be installed in a non-standard location.
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+#     collect_memstats: true        # enables charts for Go runtime's memory statistics
+#     extra_charts: {}              # defines extra data/charts to monitor, please see the example below
+#
+# If collect_memstats is disabled and no extra charts are defined, this module will disable itself, as it has no data to
+# collect.
+#
+# Please visit the module wiki page for more information on how to use the extra_charts variable:
+#
+# https://github.com/firehol/netdata/wiki/Monitoring-Go-Applications#monitoring-custom-vars-with-go_expvar
+#
+# Configuration example
+# ---------------------
+
+#app1:
+#  name : 'app1'
+#  url  : 'http://127.0.0.1:8080/debug/vars'
+#  collect_memstats: true
+#  extra_charts:
+#    - id: "runtime_goroutines"
+#      options:
+#        name: num_goroutines
+#        title: "runtime: number of goroutines"
+#        units: goroutines
+#        family: runtime
+#        context: expvar.runtime.goroutines
+#        chart_type: line
+#      lines:
+#        - {expvar_key: 'runtime.goroutines', expvar_type: int, id: runtime_goroutines}
+#    - id: "foo_counters"
+#      options:
+#        name: counters
+#        title: "some random counters"
+#        units: awesomeness
+#        family: counters
+#        context: expvar.foo.counters
+#        chart_type: line
+#      lines:
+#        - {expvar_key: 'counters.cnt1', expvar_type: int, id: counters_cnt1}
+#        - {expvar_key: 'counters.cnt2', expvar_type: float, id: counters_cnt2}
+
diff --git a/conf.d/python.d/isc_dhcpd.conf b/conf.d/python.d/isc_dhcpd.conf
index 7c8fe3ce..938ca6e7 100644
--- a/conf.d/python.d/isc_dhcpd.conf
+++ b/conf.d/python.d/isc_dhcpd.conf
@@ -56,8 +56,11 @@
 #
 # Additionally to the above, isc_dhcpd supports the following:
 #
-#     leases_path: 'PATH'         # the path to dhcpd.leases file
-#     pools: 'dhcpd pools list'   # Pools in CIDR format
+#     leases_path: 'PATH'                    # the path to dhcpd.leases file
+#     pools:
+#       office:         '192.168.2.0/24'     # name(dimension): pool in CIDR format
+#       wifi:           '192.168.3.0/24'     # name(dimension): pool in CIDR format
+#       192.168.4.0/24: '192.168.4.0/24'     # name(dimension): pool in CIDR format
 #
 #-----------------------------------------------------------------------
 # IMPORTANT notes
@@ -75,4 +78,6 @@
 #
 #leases:
 #  leases_path : '/var/lib/dhcp/dhcpd.leases'
-#  pools       : '192.168.3.0/24 192.168.4.0/24 192.168.5.0/24'
+#  pools:
+#    office: '192.168.2.0/24'
+#    wifi:   '192.168.3.0/24'
diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf
index d4d2bafc..12dddae6 100644
--- a/conf.d/python.d/postgres.conf
+++ b/conf.d/python.d/postgres.conf
@@ -68,6 +68,7 @@
 #
 #     table_stats : false
 #     index_stats : false
+#     database_poll : 'dbase_name1 dbase_name2' # poll only specified databases (all other will be excluded from charts)
 #
 # Postfix permissions are configured at its pg_hba.conf file. You can
 # "trust" local clients to allow netdata to connect, or you can create
diff --git a/conf.d/python.d/rabbitmq.conf b/conf.d/python.d/rabbitmq.conf
new file mode 100644
index 00000000..eccf65df
--- /dev/null
+++ b/conf.d/python.d/rabbitmq.conf
@@ -0,0 +1,75 @@
+# netdata python.d.plugin configuration for rabbitmq
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, rabbitmq plugin also supports the following:
+#
+#     host: 'ipaddress'                # Server ip address or hostname. Default: 127.0.0.1
+#     port: 'port'                     # Rabbitmq port. Default: 15672
+#     scheme: 'scheme'                 # http or https. Default: http
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+#
+local:
+ host: '127.0.0.1'
+ user: 'guest'
+ pass: 'guest'
diff --git a/conf.d/python.d/samba.conf b/conf.d/python.d/samba.conf
new file mode 100644
index 00000000..865281cd
--- /dev/null
+++ b/conf.d/python.d/samba.conf
@@ -0,0 +1,58 @@
+# netdata python.d.plugin configuration for samba
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+update_every: 5
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+#
+
diff --git a/conf.d/python.d/smartd_log.conf b/conf.d/python.d/smartd_log.conf
index e16454df..8764ffd3 100644
--- a/conf.d/python.d/smartd_log.conf
+++ b/conf.d/python.d/smartd_log.conf
@@ -58,11 +58,11 @@
 #
 #    log_path: '/path/to/smartdlogs'   # path to smartd log files. Default is /var/log/smartd
 #    raw_values: no                    # raw or normalized values on charts. Default is normalized.
-#    smart_attributes: '1 2 3 4 44'    # add additional smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200'].
+#    smart_attributes: '1 2 3 4 44'    # smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200'].
 #
 # ----------------------------------------------------------------------
 # Additional information
-#  Plugin reads smartd log files (-A option). 
+#  Plugin reads smartd log files (-A option).
 #  You need to add (man smartd) to /etc/default/smartmontools '-i 600 -A /var/log/smartd/' to pass additional options to smartd on startup
 #  Then restart smartd service and check /path/log/smartdlogs
 #  ls /var/log/smartd/
@@ -74,12 +74,12 @@
 # RAW vs NORMALIZED values
 # "Normalized value", commonly referred to as just "value". This is a most universal measurement, on the scale from 0 (bad) to some maximum (good) value.
 # Maximum values are typically 100, 200 or 253. Rule of thumb is: high values are good, low values are bad.
-# 
+#
 # "Raw value" - the value of the attribute as it is tracked by the device, before any normalization takes place.
 # Some raw numbers provide valuable insight when properly interpreted. These cases will be discussed later on.
 # Raw values are typically listed in hexadecimal numbers. The raw value has different structure for different vendors and is often not meaningful as a decimal number.
 #
 #
 # JOB configuration
-# 
+#
 log_path: '/var/log/smartd'
diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf
index 06656285..e51b565d 100644
--- a/conf.d/python.d/web_log.conf
+++ b/conf.d/python.d/web_log.conf
@@ -60,13 +60,21 @@
 # Additionally to the above, web_log also supports the following:
 #
 #     path: 'PATH'                        # the path to web server log file
-#     detailed_response_codes: yes/no     # Default: yes. Additional chart where response codes are not grouped
-#     detailed_response_aggregate: yes/no # Default: yes. Not aggregated detailed response codes charts
-#     all_time : yes/no                   # Default: yes. All time unique client IPs chart (50000 addresses ~ 400KB)
+#     path: 'PATH[0-9]*[0-9]'             # log files with date suffix are also supported
+#     detailed_response_codes: yes/no     # default: yes. Additional chart where response codes are not grouped
+#     detailed_response_aggregate: yes/no # default: yes. Not aggregated detailed response codes charts
+#     all_time : yes/no                   # default: yes. All time unique client IPs chart (50000 addresses ~ 400KB)
+#     filter:                             # filter with regex
+#          include: 'REGEX'               # only those rows that matches the regex
+#          exclude: 'REGEX'               # all rows except those that matches the regex
 #     categories:                         # requests per url chart configuration
 #          cacti: 'cacti.*'               # name(dimension): REGEX to match
 #          observium: 'observium.*'       # name(dimension): REGEX to match
 #          stub_status: 'stub_status'     # name(dimension): REGEX to match
+#     user_defined:                       # requests per pattern in <user_defined> field (custom_log_format)
+#          cacti: 'cacti.*'               # name(dimension): REGEX to match
+#          observium: 'observium.*'       # name(dimension): REGEX to match
+#          stub_status: 'stub_status'     # name(dimension): REGEX to match
 #     custom_log_format:                  # define a custom log format
 #          pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d\.\d+) '
 #          time_multiplier: 1000000       # type <int> - convert time to microseconds
@@ -83,7 +91,7 @@
 # nginx:
 #   log_format netdata '$remote_addr - $remote_user [$time_local] '
 #                      '"$request" $status $body_bytes_sent '
-#                      '$request_length $request_time '
+#                      '$request_length $request_time $upstream_response_time '
 #                      '"$http_referer" "$http_user_agent"';
 #   access_log /var/log/nginx/access.log netdata;
 #
@@ -145,3 +153,35 @@ gunicorn_log:
 gunicorn_log2:
   name: 'gunicorn'
   path: '/var/log/gunicorn/gunicorn-access.log'
+
+# -------------------------------------------
+# Apache Cache
+apache_cache:
+  name: 'apache_cache'
+  type: 'apache_cache'
+  path: '/var/log/apache/cache.log'
+
+apache2_cache:
+  name: 'apache_cache'
+  type: 'apache_cache'
+  path: '/var/log/apache2/cache.log'
+
+httpd_cache:
+  name: 'apache_cache'
+  type: 'apache_cache'
+  path: '/var/log/httpd/cache.log'
+
+# -------------------------------------------
+# Squid
+
+# debian/ubuntu
+squid_log1:
+  name: 'squid'
+  type: 'squid'
+  path: '/var/log/squid3/access.log'
+
+#gentoo
+squid_log2:
+  name: 'squid'
+  type: 'squid'
+  path: '/var/log/squid/access.log'