Imported Upstream version 1.3.0+dfsgupstream/1.3.0+dfsg

18 files changed, 1545 insertions, 0 deletions

diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf
new file mode 100644
index 000000000..5b151ef70
--- /dev/null
+++ b/conf.d/python.d/apache.conf
@@ -0,0 +1,80 @@
+# netdata python.d.plugin configuration for apache
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, apache also supports the following:
+#
+#     url: 'URL'       # the URL to fetch apache's mod_status stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost/server-status?auto'
+
+localipv4:
+  name : 'local'
+  url  : 'http://127.0.0.1/server-status?auto'
+
+localipv6:
+  name : 'local'
+  url  : 'http://::1/server-status?auto'
diff --git a/conf.d/python.d/apache_cache.conf b/conf.d/python.d/apache_cache.conf
new file mode 100644
index 000000000..98eecd0e8
--- /dev/null
+++ b/conf.d/python.d/apache_cache.conf
@@ -0,0 +1,76 @@
+# netdata python.d.plugin configuration for apache cache
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, apache_cache also supports the following:
+#
+#     path: 'PATH'     # the path to apache's cache.log
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+apache:
+  name: 'local'
+  path: '/var/log/apache/cache.log'
+
+apache2:
+  name: 'local'
+  path: '/var/log/apache2/cache.log'
+
+httpd:
+  name: 'local'
+  path: '/var/log/httpd/cache.log'
diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf
new file mode 100644
index 000000000..10c96917f
--- /dev/null
+++ b/conf.d/python.d/cpufreq.conf
@@ -0,0 +1,37 @@
+# netdata python.d.plugin configuration for cpufreq
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# The directory to search for the file scaling_cur_freq
+sys_dir: "/sys/devices"
diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf
new file mode 100644
index 000000000..917c5272e
--- /dev/null
+++ b/conf.d/python.d/dovecot.conf
@@ -0,0 +1,89 @@
+# netdata python.d.plugin configuration for dovecot
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, dovecot also supports the following:
+#
+#     socket: 'path/to/dovecot/stats'
+#
+#  or
+#     host: 'IP or HOSTNAME' # the host to connect to
+#     port: PORT             # the port to connect to
+#
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 24242
+
+localipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 24242
+
+localipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 24242
+
+localsocket:
+  name     : 'local'
+  socket   : '/var/run/dovecot/stats'
+
diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf
new file mode 100644
index 000000000..31f9a49a0
--- /dev/null
+++ b/conf.d/python.d/example.conf
@@ -0,0 +1,63 @@
+# netdata python.d.plugin configuration for example
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, example also supports the following:
+#
+# - none
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf
new file mode 100644
index 000000000..6aca13c34
--- /dev/null
+++ b/conf.d/python.d/exim.conf
@@ -0,0 +1,86 @@
+# netdata python.d.plugin configuration for postfix
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# exim is slow, so once every 10 seconds
+update_every: 10
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, postfix also supports the following:
+#
+#     command: 'exim -bpc' # the command to run
+#
+
+# ----------------------------------------------------------------------
+# REQUIRED exim CONFIGURATION
+#
+# netdata will query exim as user netdata.
+# By default exim will refuse to respond.
+#
+# To allow querying exim as non-admin user, please set the following
+# to your exim configuration:
+#
+#      queue_list_requires_admin = false
+#
+# Your exim configuration should be in
+#
+#     /etc/exim/exim4.conf
+# or
+#     /etc/exim4/conf.d/main/000_local_options
+#
+# Please consult your distribution information to find the exact file.
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+
+local:
+  command: 'exim -bpc'
diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf
new file mode 100644
index 000000000..0c78449b4
--- /dev/null
+++ b/conf.d/python.d/hddtemp.conf
@@ -0,0 +1,90 @@
+# netdata python.d.plugin configuration for hddtemp
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, hddtemp also supports the following:
+#
+#     host: 'IP or HOSTNAME' # the host to connect to
+#     port: PORT             # the port to connect to
+#
+
+# By default this module will try to autodetect disks
+# (autodetection works only for disk which names start with "sd").
+# However this can be overridden by setting variable `disks` to
+# array of desired disks. Example for two disks:
+#
+# devices:
+#   - sda
+#   - sdb
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name: 'local'
+  host: 'localhost'
+  port: 7634
+
+localipv4:
+  name: 'local'
+  host: '127.0.0.1'
+  port: 7634
+
+localipv6:
+  name: 'local'
+  host: '::1'
+  port: 7634
diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf
new file mode 100644
index 000000000..e039026cc
--- /dev/null
+++ b/conf.d/python.d/ipfs.conf
@@ -0,0 +1,67 @@
+# netdata python.d.plugin configuration for ipfs
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, ipfs also supports the following:
+#
+#     url: 'URL'       # URL to the IPFS API
+#
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost:5001'
diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf
new file mode 100644
index 000000000..f1723dc81
--- /dev/null
+++ b/conf.d/python.d/memcached.conf
@@ -0,0 +1,85 @@
+# netdata python.d.plugin configuration for memcached
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, memcached also supports the following:
+#
+#     socket: 'path/to/memcached.sock'
+#
+#  or
+#     host: 'IP or HOSTNAME' # the host to connect to
+#     port: PORT             # the port to connect to
+#
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 11211
+
+localipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 11211
+
+localipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 11211
+
diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf
new file mode 100644
index 000000000..d247b89a0
--- /dev/null
+++ b/conf.d/python.d/mysql.conf
@@ -0,0 +1,175 @@
+# netdata python.d.plugin configuration for mysql
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, mysql also supports the following:
+#
+#     socket: 'path/to/mysql.sock'
+#
+#  or
+#     host: 'IP or HOSTNAME' # the host to connect to
+#     port: PORT             # the port to connect to
+#
+#  in all cases, the following can also be set:
+#
+#     user: 'username'       # the mysql username to use
+#     pass: 'password'       # the mysql password to use
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+mycnf1:
+  name     : 'local'
+  'my.cnf' : '/etc/my.cnf'
+
+mycnf2:
+  name     : 'local'
+  'my.cnf' : '/etc/mysql/my.cnf'
+
+socket1:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  socket   : '/var/run/mysqld/mysqld.sock'
+
+socket2:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  socket   : '/var/lib/mysql/mysql.sock'
+
+socket3:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  socket   : '/tmp/mysql.sock'
+
+tcp:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  host     : 'localhost'
+  port     : '3306'
+
+tcpipv4:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  host     : '127.0.0.1'
+  port     : '3306'
+
+tcpipv6:
+  name     : 'local'
+  # user     : ''
+  # pass     : ''
+  host     : '::1'
+  port     : '3306'
+
+
+# Now we try the same as above with user: root
+# A few systems configure mysql to accept passwordless
+# root access.
+
+mycnf1_root:
+  name     : 'local'
+  user     : 'root'
+  'my.cnf' : '/etc/my.cnf'
+
+mycnf2_root:
+  name     : 'local'
+  user     : 'root'
+  'my.cnf' : '/etc/mysql/my.cnf'
+
+socket1_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  socket   : '/var/run/mysqld/mysqld.sock'
+
+socket2_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  socket   : '/var/lib/mysql/mysql.sock'
+
+socket3_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  socket   : '/tmp/mysql.sock'
+
+tcp_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  host     : 'localhost'
+  port     : '3306'
+
+tcpipv4_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  host     : '127.0.0.1'
+  port     : '3306'
+
+tcpipv6_root:
+  name     : 'local'
+  user     : 'root'
+  # pass     : ''
+  host     : '::1'
+  port     : '3306'
+
diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf
new file mode 100644
index 000000000..1a27d67c5
--- /dev/null
+++ b/conf.d/python.d/nginx.conf
@@ -0,0 +1,82 @@
+# netdata python.d.plugin configuration for nginx
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, nginx also supports the following:
+#
+#     url: 'URL'       # the URL to fetch nginx's status stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost/stub_status'
+
+localipv4:
+  name : 'local'
+  url  : 'http://127.0.0.1/stub_status'
+
+localipv6:
+  name : 'local'
+  url  : 'http://::1/stub_status'
+
diff --git a/conf.d/python.d/nginx_log.conf b/conf.d/python.d/nginx_log.conf
new file mode 100644
index 000000000..6a53c5204
--- /dev/null
+++ b/conf.d/python.d/nginx_log.conf
@@ -0,0 +1,72 @@
+# netdata python.d.plugin configuration for nginx log
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, nginx_log also supports the following:
+#
+#     path: 'PATH'     # the path to nginx's access.log
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+nginx_log:
+  name: 'local'
+  path: '/var/log/nginx/access.log'
+
+nginx_log2:
+  name: 'local'
+  path: '/var/log/nginx/nginx-access.log'
diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf
new file mode 100644
index 000000000..06d2367ae
--- /dev/null
+++ b/conf.d/python.d/phpfpm.conf
@@ -0,0 +1,82 @@
+# netdata python.d.plugin configuration for PHP-FPM
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, PHP-FPM also supports the following:
+#
+#     url: 'URL'       # the URL to fetch nginx's status stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : "http://localhost/status"
+
+localipv4:
+  name : 'local'
+  url  : "http://127.0.0.1/status"
+
+localipv6:
+  name : 'local'
+  url  : "http://::1/status"
+
diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf
new file mode 100644
index 000000000..ca9d8fada
--- /dev/null
+++ b/conf.d/python.d/postfix.conf
@@ -0,0 +1,67 @@
+# netdata python.d.plugin configuration for postfix
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# postfix is slow, so once every 10 seconds
+update_every: 10
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, postfix also supports the following:
+#
+#     command: 'postqueue -p' # the command to run
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+
+local:
+  command: 'postqueue -p'
diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf
new file mode 100644
index 000000000..9935bff77
--- /dev/null
+++ b/conf.d/python.d/redis.conf
@@ -0,0 +1,97 @@
+# netdata python.d.plugin configuration for redis
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, redis also supports the following:
+#
+#     socket: 'path/to/mysql.sock'
+#
+#  or
+#     host: 'IP or HOSTNAME' # the host to connect to
+#     port: PORT             # the port to connect to
+#
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+socket1:
+  name     : 'local'
+  socket   : '/tmp/redis.sock'
+
+socket2:
+  name     : 'local'
+  socket   : '/var/run/redis/redis.sock'
+
+socket3:
+  name     : 'local'
+  socket   : '/var/lib/redis/redis.sock'
+
+localhost:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 6379
+
+localipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 6379
+
+localipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 6379
+
diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf
new file mode 100644
index 000000000..7d895c348
--- /dev/null
+++ b/conf.d/python.d/sensors.conf
@@ -0,0 +1,54 @@
+# netdata python.d.plugin configuration for sensors
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# Limit the number of sensors types.
+# Comment the ones you want to disable.
+# Also, re-arranging this list controls the order of the charts at the
+# netdata dashboard.
+
+types:
+  - temperature
+  - fan
+  - voltage
+  - current
+  - power
+  - energy
+  - humidity
+
+# ----------------------------------------------------------------------
+# Limit the number of sensors chips.
+# Uncomment the first line (chips:) and add chip names below it.
+# The chip names that start with like that will be matched.
+# You can find the chip names using the sensors command.
+
+#chips:
+#  - i8k
+#  - coretemp
+#
+# chip names can be found using the sensors shell command
+# the prefix is matched (anything that starts like that)
diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf
new file mode 100644
index 000000000..27800bde7
--- /dev/null
+++ b/conf.d/python.d/squid.conf
@@ -0,0 +1,162 @@
+# netdata python.d.plugin configuration for squid
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, squid also supports the following:
+#
+#     host   : 'IP or HOSTNAME' # the host to connect to
+#     port   : PORT             # the port to connect to
+#     request: 'URL'            # the URL to request from squid
+#
+
+# ----------------------------------------------------------------------
+# SQUID CONFIGURATION
+#
+# See:
+# http://wiki.squid-cache.org/Features/CacheManager
+#
+# In short, add to your squid configuration these:
+#
+# http_access allow localhost manager
+# http_access deny manager
+#
+# To remotely monitor a squid:
+#
+# acl managerAdmin src 192.0.2.1
+# http_access allow localhost manager
+# http_access allow managerAdmin manager
+# http_access deny manager
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+tcp3128old:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 3128
+  request  : 'cache_object://localhost:3128/counters'
+
+tcp8080old:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 8080
+  request  : 'cache_object://localhost:3128/counters'
+
+tcp3128new:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 3128
+  request  : '/squid-internal-mgr/counters'
+
+tcp8080new:
+  name     : 'local'
+  host     : 'localhost'
+  port     : 8080
+  request  : '/squid-internal-mgr/counters'
+
+# IPv4
+
+tcp3128oldipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 3128
+  request  : 'cache_object://127.0.0.1:3128/counters'
+
+tcp8080oldipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 8080
+  request  : 'cache_object://127.0.0.1:3128/counters'
+
+tcp3128newipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 3128
+  request  : '/squid-internal-mgr/counters'
+
+tcp8080newipv4:
+  name     : 'local'
+  host     : '127.0.0.1'
+  port     : 8080
+  request  : '/squid-internal-mgr/counters'
+
+# IPv6
+
+tcp3128oldipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 3128
+  request  : 'cache_object://[::1]:3128/counters'
+
+tcp8080oldipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 8080
+  request  : 'cache_object://[::1]:3128/counters'
+
+tcp3128newipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 3128
+  request  : '/squid-internal-mgr/counters'
+
+tcp8080newipv6:
+  name     : 'local'
+  host     : '::1'
+  port     : 8080
+  request  : '/squid-internal-mgr/counters'
+
diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf
new file mode 100644
index 000000000..aef9631b9
--- /dev/null
+++ b/conf.d/python.d/tomcat.conf
@@ -0,0 +1,81 @@
+# netdata python.d.plugin configuration for tomcat
+#
+# This file is in YaML format. Generally the format is:
+#
+# name: value
+#
+# There are 2 sections:
+#  - global variables
+#  - one or more JOBS
+#
+# JOBS allow you to collect values from multiple sources.
+# Each source will have its own set of charts.
+#
+# JOB parameters have to be indented (using spaces only, example below).
+
+# ----------------------------------------------------------------------
+# Global Variables
+# These variables set the defaults for all JOBs, however each JOB
+# may define its own, overriding the defaults.
+
+# update_every sets the default data collection frequency.
+# If unset, the python.d.plugin default is used.
+# update_every: 1
+
+# priority controls the order of charts at the netdata dashboard.
+# Lower numbers move the charts towards the top of the page.
+# If unset, the default for python.d.plugin is used.
+# priority: 60000
+
+# retries sets the number of retries to be made in case of failures.
+# If unset, the default for python.d.plugin is used.
+# Attempts to restore the service are made once every update_every
+# and only if the module has collected values in the past.
+# retries: 5
+
+# ----------------------------------------------------------------------
+# JOBS (data collection sources)
+#
+# The default JOBS share the same *name*. JOBS with the same name
+# are mutually exclusive. Only one of them will be allowed running at
+# any time. This allows autodetection to try several alternatives and
+# pick the one that works.
+#
+# Any number of jobs is supported.
+#
+# All python.d.plugin JOBS (for all its modules) support a set of
+# predefined parameters. These are:
+#
+# job_name:
+#     name: myname     # the JOB's name as it will appear at the
+#                      # dashboard (by default is the job_name)
+#                      # JOBs sharing a name are mutually exclusive
+#     update_every: 1  # the JOB's data collection frequency
+#     priority: 60000  # the JOB's order on the dashboard
+#     retries: 5       # the JOB's number of restoration attempts
+#
+# Additionally to the above, tomcat also supports the following:
+#
+#     url: 'URL'       # the URL to fetch nginx's status stats
+#
+# if the URL is password protected, the following are supported:
+#
+#     user: 'username'
+#     pass: 'password'
+#
+
+# ----------------------------------------------------------------------
+# AUTO-DETECTION JOBS
+# only one of them will run (they have the same name)
+
+localhost:
+  name : 'local'
+  url  : 'http://localhost:8080/manager/status?XML=true'
+
+localipv4:
+  name : 'local'
+  url  : 'http://127.0.0.1:8080/manager/status?XML=true'
+
+localipv6:
+  name : 'local'
+  url  : 'http://[::1]:8080/manager/status?XML=true'