New upstream version 1.11.0+dfsgupstream/1.11.0+dfsg

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

48 files changed, 0 insertions, 4452 deletions

diff --git a/conf.d/python.d/apache.conf b/conf.d/python.d/apache.conf
deleted file mode 100644
index 3bbc3f786..000000000
--- a/conf.d/python.d/apache.conf
+++ /dev/null
@@ -1,87 +0,0 @@
-# netdata python.d.plugin configuration for apache
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, apache also supports the following:
-#
-#     url: 'URL'       # the URL to fetch apache's mod_status stats
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost/server-status?auto'
-
-localipv4:
-  name : 'local'
-  url  : 'http://127.0.0.1/server-status?auto'
-
-localipv6:
-  name : 'local'
-  url  : 'http://::1/server-status?auto'
diff --git a/conf.d/python.d/beanstalk.conf b/conf.d/python.d/beanstalk.conf
deleted file mode 100644
index 940801877..000000000
--- a/conf.d/python.d/beanstalk.conf
+++ /dev/null
@@ -1,80 +0,0 @@
-# netdata python.d.plugin configuration for beanstalk
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# chart_cleanup sets the default chart cleanup interval in iterations.
-# A chart is marked as obsolete if it has not been updated
-# 'chart_cleanup' iterations in a row.
-# When a plugin sends the obsolete flag, the charts are not deleted
-# from netdata immediately.
-# They will be hidden immediately (not offered to dashboard viewer,
-# streamed upstream and archived to backends) and deleted one hour
-# later (configurable from netdata.conf).
-# chart_cleanup: 10
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#     chart_cleanup: 10       # the JOB's chart cleanup interval in iterations
-#
-# Additionally to the above, apache also supports the following:
-#
-#     host: 'host'       # Server ip address or hostname. Default: 127.0.0.1
-#     port: port         # Beanstalkd port. Default:
-#
-# ----------------------------------------------------------------------
diff --git a/conf.d/python.d/bind_rndc.conf b/conf.d/python.d/bind_rndc.conf
deleted file mode 100644
index 71958ff98..000000000
--- a/conf.d/python.d/bind_rndc.conf
+++ /dev/null
@@ -1,112 +0,0 @@
-# netdata python.d.plugin configuration for bind_rndc
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, bind_rndc also supports the following:
-#
-#     named_stats_path: 'path to named.stats'		# Default: '/var/log/bind/named.stats'
-#------------------------------------------------------------------------------------------------------------------
-# IMPORTANT Information
-#
-# BIND APPEND logs at EVERY RUN. Its NOT RECOMMENDED to set update_every below 30 sec.
-# STRONGLY RECOMMENDED to create a bind-rndc conf file for logrotate
-#
-# To set up your BIND to dump stats do the following:
-#
-# 1. add to 'named.conf.options' options {}: 
-# statistics-file "/var/log/bind/named.stats";
-#
-# 2. Create bind/ directory in /var/log
-# cd /var/log/ && mkdir bind
-#
-# 3. Change owner of directory to 'bind' user
-# chown bind bind/
-#
-# 4. RELOAD (NOT restart) BIND
-# systemctl reload bind9.service
-#
-# 5. Run as a root 'rndc stats' to dump (BIND will create named.stats in new directory)
-# 
-#
-# To ALLOW NETDATA TO RUN 'rndc stats' change '/etc/bind/rndc.key' group to netdata
-# chown :netdata rndc.key
-#
-# The last BUT NOT least is to create bind-rndc.conf in logrotate.d/
-# The working one
-#  /var/log/bind/named.stats {
-#   
-#     daily
-#     rotate 4
-#     compress
-#     delaycompress
-#     create 0644 bind bind
-#     missingok
-#     postrotate
-#         rndc reload > /dev/null
-#     endscript
-# }
-#
-# To test your logrotate conf file run as root:
-#
-# logrotate /etc/logrotate.d/bind-rndc -d (debug dry-run mode)
-#
-# ----------------------------------------------------------------------
diff --git a/conf.d/python.d/ceph.conf b/conf.d/python.d/ceph.conf
deleted file mode 100644
index 78ac1e251..000000000
--- a/conf.d/python.d/ceph.conf
+++ /dev/null
@@ -1,75 +0,0 @@
-# netdata python.d.plugin configuration for ceph stats
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 10
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 10         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, ceph plugin also supports the following:
-#
-#     config_file: 'config_file'       # Ceph config file.
-#     keyring_file: 'keyring_file'     # Ceph keyring file. netdata user must be added into ceph group
-#                                      # and keyring file must be read group permission.
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-config_file: '/etc/ceph/ceph.conf'
-keyring_file: '/etc/ceph/ceph.client.admin.keyring'
-
diff --git a/conf.d/python.d/chrony.conf b/conf.d/python.d/chrony.conf
deleted file mode 100644
index 9ac906b5f..000000000
--- a/conf.d/python.d/chrony.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# netdata python.d.plugin configuration for chrony 
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-update_every: 5
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, chrony also supports the following:
-#
-#     command: 'chrony tracking' # the command to run
-#
-
-# ----------------------------------------------------------------------
-# REQUIRED chrony CONFIGURATION
-#
-# netdata will query chrony as user netdata.
-# verify that user netdata is allowed to call 'chronyc tracking'
-# Check cmdallow in chrony.conf
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-
-local:
-  command: 'chronyc -n tracking'
diff --git a/conf.d/python.d/couchdb.conf b/conf.d/python.d/couchdb.conf
deleted file mode 100644
index 5f6e75cff..000000000
--- a/conf.d/python.d/couchdb.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-# netdata python.d.plugin configuration for couchdb
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# By default, CouchDB only updates its stats every 10 seconds.
-update_every: 10
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, the couchdb plugin also supports the following:
-#
-#     host: 'ipaddress'                # Server ip address or hostname. Default: 127.0.0.1
-#     port: 'port'                     # CouchDB port. Default: 15672
-#     scheme: 'scheme'                 # http or https. Default: http
-#     node: 'couchdb@127.0.0.1'        # CouchDB node name. Same as -name vm.args argument.
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# if db-specific stats are desired, place their names in databases:
-#     databases: 'npm-registry animaldb'
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-localhost:
- name: 'local'
- host: '127.0.0.1'
- port: '5984'
- node: 'couchdb@127.0.0.1'
- scheme: 'http'
-# user: 'admin'
-# pass: 'password'
diff --git a/conf.d/python.d/cpufreq.conf b/conf.d/python.d/cpufreq.conf
deleted file mode 100644
index 0890245d9..000000000
--- a/conf.d/python.d/cpufreq.conf
+++ /dev/null
@@ -1,43 +0,0 @@
-# netdata python.d.plugin configuration for cpufreq
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# The directory to search for the file scaling_cur_freq
-sys_dir: "/sys/devices"
diff --git a/conf.d/python.d/dns_query_time.conf b/conf.d/python.d/dns_query_time.conf
deleted file mode 100644
index d32c6db83..000000000
--- a/conf.d/python.d/dns_query_time.conf
+++ /dev/null
@@ -1,71 +0,0 @@
-# netdata python.d.plugin configuration for dns_query_time
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, dns_query_time also supports the following:
-#
-#     dns_servers: 'dns servers'       # List of dns servers to query
-#     domains: 'domains'               # List of domains
-#     aggregate: yes/no                # Aggregate all servers in one chart or not
-#     response_timeout: 4              # Dns query response timeout (query = -100 if response time > response_time)
-#
-# ----------------------------------------------------------------------
\ No newline at end of file
diff --git a/conf.d/python.d/dnsdist.conf b/conf.d/python.d/dnsdist.conf
deleted file mode 100644
index aec58b8e1..000000000
--- a/conf.d/python.d/dnsdist.conf
+++ /dev/null
@@ -1,85 +0,0 @@
-# netdata python.d.plugin configuration for dnsdist
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-#update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-#retries: 600000
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-#autodetection_retry: 1
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-#
-# Additionally to the above, dnsdist also supports the following:
-#
-#     url: 'URL'             # the URL to fetch dnsdist performance statistics
-#     user: 'username'       # username for basic auth
-#     pass: 'password'       # password for basic auth
-#     header:
-#          X-API-Key: 'Key'  # API key
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-# localhost:
-#  name : 'local'
-#  url  : 'http://127.0.0.1:5053/jsonstat?command=stats'
-#  user : 'username'
-#  pass : 'password'
-#  header:
-#    X-API-Key: 'dnsdist-api-key'
-
-
diff --git a/conf.d/python.d/dovecot.conf b/conf.d/python.d/dovecot.conf
deleted file mode 100644
index 56c394991..000000000
--- a/conf.d/python.d/dovecot.conf
+++ /dev/null
@@ -1,96 +0,0 @@
-# netdata python.d.plugin configuration for dovecot
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, dovecot also supports the following:
-#
-#     socket: 'path/to/dovecot/stats'
-#
-#  or
-#     host: 'IP or HOSTNAME' # the host to connect to
-#     port: PORT             # the port to connect to
-#
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 24242
-
-localipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 24242
-
-localipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 24242
-
-localsocket:
-  name     : 'local'
-  socket   : '/var/run/dovecot/stats'
-
diff --git a/conf.d/python.d/elasticsearch.conf b/conf.d/python.d/elasticsearch.conf
deleted file mode 100644
index 213843bf9..000000000
--- a/conf.d/python.d/elasticsearch.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-# netdata python.d.plugin configuration for elasticsearch stats
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, elasticsearch plugin also supports the following:
-#
-#     host: 'ipaddress'                # Server ip address or hostname.
-#     port: 'port'                     # Port on which elasticsearch  listen.
-#     cluster_health: False/True       # Calls to cluster health elasticsearch API. Enabled by default.
-#     cluster_stats: False/True        # Calls to cluster stats elasticsearch API. Enabled by default.
-#
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-local:
- host: '127.0.0.1'
- port: '9200'
diff --git a/conf.d/python.d/example.conf b/conf.d/python.d/example.conf
deleted file mode 100644
index e7fed9b50..000000000
--- a/conf.d/python.d/example.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-# netdata python.d.plugin configuration for example
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, example also supports the following:
-#
-# - none
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
diff --git a/conf.d/python.d/exim.conf b/conf.d/python.d/exim.conf
deleted file mode 100644
index 2add7b2cb..000000000
--- a/conf.d/python.d/exim.conf
+++ /dev/null
@@ -1,93 +0,0 @@
-# netdata python.d.plugin configuration for exim 
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# exim is slow, so once every 10 seconds
-update_every: 10
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, exim also supports the following:
-#
-#     command: 'exim -bpc' # the command to run
-#
-
-# ----------------------------------------------------------------------
-# REQUIRED exim CONFIGURATION
-#
-# netdata will query exim as user netdata.
-# By default exim will refuse to respond.
-#
-# To allow querying exim as non-admin user, please set the following
-# to your exim configuration:
-#
-#      queue_list_requires_admin = false
-#
-# Your exim configuration should be in
-#
-#     /etc/exim/exim4.conf
-# or
-#     /etc/exim4/conf.d/main/000_local_options
-#
-# Please consult your distribution information to find the exact file.
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-
-local:
-  command: 'exim -bpc'
diff --git a/conf.d/python.d/fail2ban.conf b/conf.d/python.d/fail2ban.conf
deleted file mode 100644
index 60ca87231..000000000
--- a/conf.d/python.d/fail2ban.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-# netdata python.d.plugin configuration for fail2ban
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, fail2ban also supports the following:
-#
-#     log_path:  'path to fail2ban.log'			                 # Default: '/var/log/fail2ban.log'
-#     conf_path: 'path to jail.local/jail.conf'			         # Default: '/etc/fail2ban/jail.local'
-#     conf_dir:  'path to jail.d/'			                     # Default: '/etc/fail2ban/jail.d/'
-#     exclude:   'jails you want to exclude from autodetection'  # Default: none
-#------------------------------------------------------------------------------------------------------------------
diff --git a/conf.d/python.d/freeradius.conf b/conf.d/python.d/freeradius.conf
deleted file mode 100644
index 3336d4c49..000000000
--- a/conf.d/python.d/freeradius.conf
+++ /dev/null
@@ -1,82 +0,0 @@
-# netdata python.d.plugin configuration for freeradius
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, freeradius also supports the following:
-#
-#     host: 'host'			    # Default: 'localhost'. Server ip address or hostname.
-#     port: 'port'			    # Default: '18121'. Port on which freeradius server listen (type = status).
-#     secret: 'secret'			# Default: 'adminsecret'. 
-#     acct: yes/no		     	# Default: no. Freeradius accounting statistics.
-#     proxy_auth: yes/no		# Default: no. Freeradius proxy authentication statistics.
-#     proxy_acct: yes/no		# Default: no. Freeradius proxy accounting statistics.
-#
-# ------------------------------------------------------------------------------------------------------------------
-# Freeradius server configuration:
-# The configuration for the status server is automatically created in the sites-available directory.
-# By default, server is enabled and can be queried from every client. 
-# FreeRADIUS will only respond to status-server messages, if the status-server virtual server has been enabled.
-# To do this, create a link from the sites-enabled directory to the status file in the sites-available directory:
-#    cd sites-enabled
-#    ln -s ../sites-available/status status
-# and restart/reload your FREERADIUS server. 
-# ------------------------------------------------------------------------------------------------------------------
diff --git a/conf.d/python.d/go_expvar.conf b/conf.d/python.d/go_expvar.conf
deleted file mode 100644
index c352b1674..000000000
--- a/conf.d/python.d/go_expvar.conf
+++ /dev/null
@@ -1,110 +0,0 @@
-# netdata python.d.plugin configuration for go_expvar
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, this plugin also supports the following:
-#
-#     url: 'http://127.0.0.1/debug/vars'       # the URL of the expvar endpoint
-#
-# As the plugin cannot possibly know the port your application listens on, there is no default value. Please include
-# the whole path of the endpoint, as the expvar handler can be installed in a non-standard location.
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-#     collect_memstats: true        # enables charts for Go runtime's memory statistics
-#     extra_charts: {}              # defines extra data/charts to monitor, please see the example below
-#
-# If collect_memstats is disabled and no extra charts are defined, this module will disable itself, as it has no data to
-# collect.
-#
-# Please visit the module wiki page for more information on how to use the extra_charts variable:
-#
-# https://github.com/firehol/netdata/wiki/Monitoring-Go-Applications#monitoring-custom-vars-with-go_expvar
-#
-# Configuration example
-# ---------------------
-
-#app1:
-#  name : 'app1'
-#  url  : 'http://127.0.0.1:8080/debug/vars'
-#  collect_memstats: true
-#  extra_charts:
-#    - id: "runtime_goroutines"
-#      options:
-#        name: num_goroutines
-#        title: "runtime: number of goroutines"
-#        units: goroutines
-#        family: runtime
-#        context: expvar.runtime.goroutines
-#        chart_type: line
-#      lines:
-#        - {expvar_key: 'runtime.goroutines', expvar_type: int, id: runtime_goroutines}
-#    - id: "foo_counters"
-#      options:
-#        name: counters
-#        title: "some random counters"
-#        units: awesomeness
-#        family: counters
-#        context: expvar.foo.counters
-#        chart_type: line
-#      lines:
-#        - {expvar_key: 'counters.cnt1', expvar_type: int, id: counters_cnt1}
-#        - {expvar_key: 'counters.cnt2', expvar_type: float, id: counters_cnt2}
-
diff --git a/conf.d/python.d/haproxy.conf b/conf.d/python.d/haproxy.conf
deleted file mode 100644
index a40dd76a5..000000000
--- a/conf.d/python.d/haproxy.conf
+++ /dev/null
@@ -1,85 +0,0 @@
-# netdata python.d.plugin configuration for haproxy
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, haproxy also supports the following:
-#
-# IMPORTANT: socket MUST BE readable AND writable by netdata user
-#
-#     socket: 'path/to/haproxy/sock'
-#
-#  OR
-#     url: 'http://<ip.address>:<port>/<url>;csv;norefresh'
-#     [user: USERNAME] only if stats auth is used
-#     [pass: PASSWORD] only if stats auth is used
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-#via_url:
-# user : 'admin'
-# pass : 'password'
-# url : 'http://127.0.0.1:7000/haproxy_stats;csv;norefresh'
-
-#via_socket:
-# socket: '/var/run/haproxy/admin.sock'
diff --git a/conf.d/python.d/hddtemp.conf b/conf.d/python.d/hddtemp.conf
deleted file mode 100644
index 9165798a2..000000000
--- a/conf.d/python.d/hddtemp.conf
+++ /dev/null
@@ -1,97 +0,0 @@
-# netdata python.d.plugin configuration for hddtemp
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, hddtemp also supports the following:
-#
-#     host: 'IP or HOSTNAME' # the host to connect to
-#     port: PORT             # the port to connect to
-#
-
-# By default this module will try to autodetect disks
-# (autodetection works only for disk which names start with "sd").
-# However this can be overridden by setting variable `disks` to
-# array of desired disks. Example for two disks:
-#
-# devices:
-#   - sda
-#   - sdb
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name: 'local'
-  host: 'localhost'
-  port: 7634
-
-localipv4:
-  name: 'local'
-  host: '127.0.0.1'
-  port: 7634
-
-localipv6:
-  name: 'local'
-  host: '::1'
-  port: 7634
diff --git a/conf.d/python.d/httpcheck.conf b/conf.d/python.d/httpcheck.conf
deleted file mode 100644
index 058e057a6..000000000
--- a/conf.d/python.d/httpcheck.conf
+++ /dev/null
@@ -1,99 +0,0 @@
-# netdata python.d.plugin configuration for httpcheck
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the httpcheck default is used, which is at 3 seconds.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# chart_cleanup sets the default chart cleanup interval in iterations.
-# A chart is marked as obsolete if it has not been updated
-# 'chart_cleanup' iterations in a row.
-# They will be hidden immediately (not offered to dashboard viewer,
-# streamed upstream and archived to backends) and deleted one hour
-# later (configurable from netdata.conf).
-# -- For this plugin, cleanup MUST be disabled, otherwise we lose response
-#    time charts
-chart_cleanup: 0
-
-# Autodetection and retries do not work for this plugin
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# -------------------------------
-# ATTENTION: Any valid configuration will be accepted, even if initial connection fails!
-# -------------------------------
-#
-# There is intentionally no default config, e.g. for 'localhost'
-
-# job_name:
-#     name: myname            # [optional] the JOB's name as it will appear at the
-#                             #   dashboard (by default is the job_name)
-#                             #   JOBs sharing a name are mutually exclusive
-#     update_every: 3         # [optional] the JOB's data collection frequency
-#     priority: 60000         # [optional] the JOB's order on the dashboard
-#     retries: 60             # [optional] the JOB's number of restoration attempts
-#     timeout: 1              # [optional] the timeout when connecting, supports decimals (e.g. 0.5s)
-#     url: 'http[s]://host-ip-or-dns[:port][path]'
-#                             # [required] the remote host url to connect to. If [:port] is missing, it defaults to 80
-#                             #   for HTTP and 443 for HTTPS. [path] is optional too, defaults to /
-#     redirect: yes           # [optional] If the remote host returns 3xx status codes, the redirection url will be
-#                             #   followed (default).
-#     status_accepted:        # [optional] By default, 200 is accepted. Anything else will result in 'bad status' in the
-#                             #   status chart, however: The response time will still be > 0, since the
-#                             #   host responded with something.
-#                             #   If redirect is enabled, the accepted status will be checked against the redirected page.
-#       - 200                 # Multiple status codes are possible. If you specify 'status_accepted', you would still
-#                             #   need to add '200'. E.g. 'status_accepted: [301]' will trigger an error in 'bad status'
-#                             #   if code is 200. Do specify numerical entries such as 200, not 'OK'.
-#     regex: None             # [optional] If the status code is accepted, the content of the response will be searched for this
-#                             #   regex (if defined). Be aware that you may need to escape the regex string. If redirect is enabled,
-#                             #   the regex will be matched to the redirected page, not the initial 3xx response.
-
-# Simple example:
-#
-# jira:
-#   url: 'https://jira.localdomain/'
-
-
-# Complex example:
-#
-# cool_website:
-#   url: 'http://cool.website:8080/home'
-#   status_accepted:
-#     - 200
-#     - 204
-#   regex: <title>My cool website!<\/title>
-#   timeout: 2
-
-# This plugin is intended for simple cases. Currently, the accuracy of the response time is low and should be used as reference only.
-
diff --git a/conf.d/python.d/icecast.conf b/conf.d/python.d/icecast.conf
deleted file mode 100644
index a900d06d3..000000000
--- a/conf.d/python.d/icecast.conf
+++ /dev/null
@@ -1,83 +0,0 @@
-# netdata python.d.plugin configuration for icecast
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, icecast also supports the following:
-#
-#     url: 'URL'       # the URL to fetch icecast's stats
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost:8443/status-json.xsl'
-
-localipv4:
-  name : 'local'
-  url  : 'http://127.0.0.1:8443/status-json.xsl'
\ No newline at end of file
diff --git a/conf.d/python.d/ipfs.conf b/conf.d/python.d/ipfs.conf
deleted file mode 100644
index c247c1b7a..000000000
--- a/conf.d/python.d/ipfs.conf
+++ /dev/null
@@ -1,74 +0,0 @@
-# netdata python.d.plugin configuration for ipfs
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, ipfs also supports the following:
-#
-#     url: 'URL'       # URL to the IPFS API
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost:5001'
diff --git a/conf.d/python.d/isc_dhcpd.conf b/conf.d/python.d/isc_dhcpd.conf
deleted file mode 100644
index 4a4c4a5e3..000000000
--- a/conf.d/python.d/isc_dhcpd.conf
+++ /dev/null
@@ -1,81 +0,0 @@
-# netdata python.d.plugin configuration for isc dhcpd leases
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, isc_dhcpd supports the following:
-#
-#     leases_path: 'PATH'                    # the path to dhcpd.leases file
-#     pools:
-#       office:         '192.168.2.0/24'     # name(dimension): pool in CIDR format
-#       wifi:           '192.168.3.0/24'     # name(dimension): pool in CIDR format
-#       192.168.4.0/24: '192.168.4.0/24'     # name(dimension): pool in CIDR format
-#
-#-----------------------------------------------------------------------
-# IMPORTANT notes
-#
-# 1. Make sure leases file is readable by netdata.
-# 2. Current implementation works only with 'default' db-time-format
-#    (weekday year/month/day hour:minute:second).
-#    This is the default, so it will work in most cases.
-# 3. Pools MUST BE in CIDR format.
-#
-# ----------------------------------------------------------------------
diff --git a/conf.d/python.d/mdstat.conf b/conf.d/python.d/mdstat.conf
deleted file mode 100644
index 66a2f153c..000000000
--- a/conf.d/python.d/mdstat.conf
+++ /dev/null
@@ -1,32 +0,0 @@
-# netdata python.d.plugin configuration for mdstat
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
diff --git a/conf.d/python.d/memcached.conf b/conf.d/python.d/memcached.conf
deleted file mode 100644
index 85c3daf65..000000000
--- a/conf.d/python.d/memcached.conf
+++ /dev/null
@@ -1,92 +0,0 @@
-# netdata python.d.plugin configuration for memcached
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, memcached also supports the following:
-#
-#     socket: 'path/to/memcached.sock'
-#
-#  or
-#     host: 'IP or HOSTNAME' # the host to connect to
-#     port: PORT             # the port to connect to
-#
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 11211
-
-localipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 11211
-
-localipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 11211
-
diff --git a/conf.d/python.d/mongodb.conf b/conf.d/python.d/mongodb.conf
deleted file mode 100644
index 62faef68d..000000000
--- a/conf.d/python.d/mongodb.conf
+++ /dev/null
@@ -1,84 +0,0 @@
-# netdata python.d.plugin configuration for mongodb
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, mongodb also supports the following:
-#
-#     host: 'IP or HOSTNAME' # type <str> the host to connect to
-#     port: PORT             # type <int> the port to connect to
-#
-#  in all cases, the following can also be set:
-#
-#     user: 'username'       # the mongodb username to use
-#     pass: 'password'       # the mongodb password to use
-#
-
-# ----------------------------------------------------------------------
-# to connect to the mongodb on localhost, without a password:
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-local:
-    name : 'local'
-    host : '127.0.0.1'
-    port : 27017
diff --git a/conf.d/python.d/mysql.conf b/conf.d/python.d/mysql.conf
deleted file mode 100644
index b5956a2c6..000000000
--- a/conf.d/python.d/mysql.conf
+++ /dev/null
@@ -1,286 +0,0 @@
-# netdata python.d.plugin configuration for mysql
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, mysql also supports the following:
-#
-#     socket: 'path/to/mysql.sock'
-#
-#  or
-#     host: 'IP or HOSTNAME' # the host to connect to
-#     port: PORT             # the port to connect to
-#
-#  in all cases, the following can also be set:
-#
-#     user: 'username'       # the mysql username to use
-#     pass: 'password'       # the mysql password to use
-#
-
-# ----------------------------------------------------------------------
-# mySQL CONFIGURATION
-#
-# netdata does not need any privilege - only the ability to connect
-# to the mysql server (netdata will not be able to see any data).
-#
-# Execute these commands to give the local user 'netdata' the ability
-# to connect to the mysql server on localhost, without a password:
-#
-# > create user 'netdata'@'localhost';
-# > grant usage on *.* to 'netdata'@'localhost';
-# > flush privileges;
-#
-# with the above statements, netdata will be able to gather mysql
-# statistics, without the ability to see or alter any data or affect
-# mysql operation in any way. No change is required below.
-#
-# If you need to monitor mysql replication too, use this instead:
-#
-# > create user 'netdata'@'localhost';
-# > grant replication client on *.* to 'netdata'@'localhost';
-# > flush privileges;
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-mycnf1:
-  name     : 'local'
-  'my.cnf' : '/etc/my.cnf'
-
-mycnf2:
-  name     : 'local'
-  'my.cnf' : '/etc/mysql/my.cnf'
-
-debiancnf:
-  name     : 'local'
-  'my.cnf' : '/etc/mysql/debian.cnf'
-
-socket1:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysqld.sock'
-
-socket2:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysql.sock'
-
-socket3:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  socket   : '/var/lib/mysql/mysql.sock'
-
-socket4:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  socket   : '/tmp/mysql.sock'
-
-tcp:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  host     : 'localhost'
-  port     : '3306'
-  # keep in mind port might be ignored by mysql, if host = 'localhost'
-  # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844
-
-tcpipv4:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  host     : '127.0.0.1'
-  port     : '3306'
-
-tcpipv6:
-  name     : 'local'
-  # user     : ''
-  # pass     : ''
-  host     : '::1'
-  port     : '3306'
-
-
-# Now we try the same as above with user: root
-# A few systems configure mysql to accept passwordless
-# root access.
-
-mycnf1_root:
-  name     : 'local'
-  user     : 'root'
-  'my.cnf' : '/etc/my.cnf'
-
-mycnf2_root:
-  name     : 'local'
-  user     : 'root'
-  'my.cnf' : '/etc/mysql/my.cnf'
-
-socket1_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysqld.sock'
-
-socket2_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysql.sock'
-
-socket3_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  socket   : '/var/lib/mysql/mysql.sock'
-
-socket4_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  socket   : '/tmp/mysql.sock'
-
-tcp_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  host     : 'localhost'
-  port     : '3306'
-  # keep in mind port might be ignored by mysql, if host = 'localhost'
-  # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844
-
-tcpipv4_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  host     : '127.0.0.1'
-  port     : '3306'
-
-tcpipv6_root:
-  name     : 'local'
-  user     : 'root'
-  # pass     : ''
-  host     : '::1'
-  port     : '3306'
-
-
-# Now we try the same as above with user: netdata
-
-mycnf1_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  'my.cnf' : '/etc/my.cnf'
-
-mycnf2_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  'my.cnf' : '/etc/mysql/my.cnf'
-
-socket1_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysqld.sock'
-
-socket2_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  socket   : '/var/run/mysqld/mysql.sock'
-
-socket3_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  socket   : '/var/lib/mysql/mysql.sock'
-
-socket4_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  socket   : '/tmp/mysql.sock'
-
-tcp_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  host     : 'localhost'
-  port     : '3306'
-  # keep in mind port might be ignored by mysql, if host = 'localhost'
-  # http://serverfault.com/questions/337818/how-to-force-mysql-to-connect-by-tcp-instead-of-a-unix-socket/337844#337844
-
-tcpipv4_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  host     : '127.0.0.1'
-  port     : '3306'
-
-tcpipv6_netdata:
-  name     : 'local'
-  user     : 'netdata'
-  # pass     : ''
-  host     : '::1'
-  port     : '3306'
-
diff --git a/conf.d/python.d/nginx.conf b/conf.d/python.d/nginx.conf
deleted file mode 100644
index 71c521066..000000000
--- a/conf.d/python.d/nginx.conf
+++ /dev/null
@@ -1,109 +0,0 @@
-# netdata python.d.plugin configuration for nginx
-#
-# You must have ngx_http_stub_status_module configured on your nginx server for this
-# plugin to work. The following is an example config.
-# It must be located inside a server { } block.
-#  
-# location /stub_status {
-#   stub_status;
-#   # Security: Only allow access from the IP below.
-#   allow 192.168.1.200;
-#   # Deny anyone else
-#   deny all;
-#  }
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, this plugin also supports the following:
-#
-#     url: 'URL'       # the URL to fetch nginx's status stats
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# Example
-# 
-# RemoteNginx:
-#     name : 'Reverse_Proxy'
-#     url  : 'http://yourdomain.com/stub_status'
-#
-# "RemoteNginx" will show up in Netdata logs. "Reverse Proxy" will show up in the menu
-# in the nginx section.
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost/stub_status'
-
-localipv4:
-  name : 'local'
-  url  : 'http://127.0.0.1/stub_status'
-
-localipv6:
-  name : 'local'
-  url  : 'http://[::1]/stub_status'
-
diff --git a/conf.d/python.d/nginx_plus.conf b/conf.d/python.d/nginx_plus.conf
deleted file mode 100644
index 7b5c8f43f..000000000
--- a/conf.d/python.d/nginx_plus.conf
+++ /dev/null
@@ -1,87 +0,0 @@
-# netdata python.d.plugin configuration for nginx_plus
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, nginx_plus also supports the following:
-#
-#     url: 'URL'       # the URL to fetch nginx_plus's stats
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost/status'
-
-localipv4:
-  name : 'local'
-  url  : 'http://127.0.0.1/status'
-
-localipv6:
-  name : 'local'
-  url  : 'http://[::1]/status'
diff --git a/conf.d/python.d/nsd.conf b/conf.d/python.d/nsd.conf
deleted file mode 100644
index 078e97216..000000000
--- a/conf.d/python.d/nsd.conf
+++ /dev/null
@@ -1,93 +0,0 @@
-# netdata python.d.plugin configuration for nsd
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# nsd-control is slow, so once every 30 seconds
-# update_every: 30
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, nsd also supports the following:
-#
-#     command: 'nsd-control stats_noreset' # the command to run
-#
-
-# ----------------------------------------------------------------------
-# IMPORTANT Information
-#
-# Netdata must have permissions to run `nsd-control stats_noreset` command
-#
-# - Example-1 (use "sudo")
-# 1. sudoers (e.g. visudo -f /etc/sudoers.d/netdata)
-#       Defaults:netdata   !requiretty
-#       netdata ALL=(ALL)  NOPASSWD: /usr/sbin/nsd-control stats_noreset
-# 2. etc/netdata/python.d/nsd.conf
-#       local:
-#         update_every: 30
-#         command: 'sudo /usr/sbin/nsd-control stats_noreset'
-#
-# - Example-2 (add "netdata" user to "nsd" group)
-# usermod -aG nsd netdata
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-
-local:
-  update_every: 30
-  command: 'nsd-control stats_noreset'
diff --git a/conf.d/python.d/ntpd.conf b/conf.d/python.d/ntpd.conf
deleted file mode 100644
index 7adc4074b..000000000
--- a/conf.d/python.d/ntpd.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-# netdata python.d.plugin configuration for ntpd
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname     # the JOB's name as it will appear at the
-#                      # dashboard (by default is the job_name)
-#                      # JOBs sharing a name are mutually exclusive
-#     update_every: 1  # the JOB's data collection frequency
-#     priority: 60000  # the JOB's order on the dashboard
-#     retries: 60      # the JOB's number of restoration attempts
-#
-# Additionally to the above, ntp also supports the following:
-#
-# host: 'localhost'       # the host to query
-# port: '123'             # the UDP port where `ntpd` listens
-# show_peers: no          # use `yes` to show peer charts. enabling this
-#                         # option is recommended only for debugging, as
-#                         # it could possibly imply memory leaks if the
-#                         # peers change frequently.
-# peer_filter: '127\..*'  # regex to exclude peers
-#                         # by default local peers are hidden
-#                         # use `''` to show all peers.
-# peer_rescan: 60         # interval (>0) to check for new/changed peers
-#                         # use `1` to check on every update
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name: 'local'
-  host: 'localhost'
-  port: '123'
-  show_peers: no
-
-localhost_ipv4:
-  name: 'local'
-  host: '127.0.0.1'
-  port: '123'
-  show_peers: no
-
-localhost_ipv6:
-  name: 'local'
-  host: '::1'
-  port: '123'
-  show_peers: no
diff --git a/conf.d/python.d/ovpn_status_log.conf b/conf.d/python.d/ovpn_status_log.conf
deleted file mode 100644
index 907f014f5..000000000
--- a/conf.d/python.d/ovpn_status_log.conf
+++ /dev/null
@@ -1,95 +0,0 @@
-# netdata python.d.plugin configuration for openvpn status log
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, openvpn status log also supports the following:
-#
-#     log_path: 'PATH'     # the path to openvpn status log file
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-# IMPORTANT information
-#
-# 1. If you are running multiple OpenVPN instances out of the same directory, MAKE SURE TO EDIT DIRECTIVES which create output files
-# so that multiple instances do not overwrite each other's output files.
-# 2. Make sure NETDATA USER CAN READ openvpn-status.log
-#
-#     * cd into directory with openvpn-status.log and run the following commands as root 
-#     * #chown :netdata openvpn-status.log && chmod 640 openvpn-status.log
-#     * To check permission and group membership run
-#     * #ls -l openvpn-status.log
-#     -rw-r----- 1 root netdata 359 dec 21 21:22 openvpn-status.log
-#
-# 3. Update_every interval MUST MATCH interval on which OpenVPN writes operational status to log file.
-# If its not true traffic chart WILL DISPLAY WRONG values
-#
-# Default OpenVPN update interval is 10 second on Debian 8
-# # ps -C openvpn -o command=
-#       /usr/sbin/openvpn --daemon ovpn-server --status /run/openvpn/server.status 10 --cd /etc/openvpn --config /etc/openvpn/server.conf
-# 
-#
-#default:
-# log_path: '/var/log/openvpn-status.log'
-#
-# ----------------------------------------------------------------------
\ No newline at end of file
diff --git a/conf.d/python.d/phpfpm.conf b/conf.d/python.d/phpfpm.conf
deleted file mode 100644
index 08688e2fa..000000000
--- a/conf.d/python.d/phpfpm.conf
+++ /dev/null
@@ -1,90 +0,0 @@
-# netdata python.d.plugin configuration for PHP-FPM
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, PHP-FPM also supports the following:
-#
-#     url: 'URL'       # the URL to fetch nginx's status stats
-#                      # Be sure and include ?full&status at the end of the url
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : "http://localhost/status?full&json"
-
-localipv4:
-  name : 'local'
-  url  : "http://127.0.0.1/status?full&json"
-
-localipv6:
-  name : 'local'
-  url  : "http://::1/status?full&json"
-
diff --git a/conf.d/python.d/portcheck.conf b/conf.d/python.d/portcheck.conf
deleted file mode 100644
index b3dd8bd3f..000000000
--- a/conf.d/python.d/portcheck.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-# netdata python.d.plugin configuration for portcheck
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# chart_cleanup sets the default chart cleanup interval in iterations.
-# A chart is marked as obsolete if it has not been updated
-# 'chart_cleanup' iterations in a row.
-# They will be hidden immediately (not offered to dashboard viewer,
-# streamed upstream and archived to backends) and deleted one hour
-# later (configurable from netdata.conf).
-# -- For this plugin, cleanup MUST be disabled, otherwise we lose latency chart
-chart_cleanup: 0
-
-# Autodetection and retries do not work for this plugin
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# -------------------------------
-# ATTENTION: Any valid configuration will be accepted, even if initial connection fails!
-# -------------------------------
-#
-# There is intentionally no default config for 'localhost'
-
-# job_name:
-#     name: myname            # [optional] the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # [optional] the JOB's data collection frequency
-#     priority: 60000         # [optional] the JOB's order on the dashboard
-#     retries: 60             # [optional] the JOB's number of restoration attempts
-#     timeout: 1              # [optional] the socket timeout when connecting
-#     host: 'dns or ip'       # [required] the remote host address in either IPv4, IPv6 or as DNS name.
-#     port: 22                # [required] the port number to check. Specify an integer, not service name.
-
-# You just have been warned about possible portscan blocking. The portcheck plugin is meant for simple use cases.
-# Currently, the accuracy of the latency is low and should be used as reference only.
-
diff --git a/conf.d/python.d/postfix.conf b/conf.d/python.d/postfix.conf
deleted file mode 100644
index e0d5a5f83..000000000
--- a/conf.d/python.d/postfix.conf
+++ /dev/null
@@ -1,74 +0,0 @@
-# netdata python.d.plugin configuration for postfix
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# postfix is slow, so once every 10 seconds
-update_every: 10
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, postfix also supports the following:
-#
-#     command: 'postqueue -p' # the command to run
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-
-local:
-  command: 'postqueue -p'
diff --git a/conf.d/python.d/postgres.conf b/conf.d/python.d/postgres.conf
deleted file mode 100644
index b69ca3717..000000000
--- a/conf.d/python.d/postgres.conf
+++ /dev/null
@@ -1,124 +0,0 @@
-# netdata python.d.plugin configuration for postgresql
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# A single connection is required in order to pull statistics.
-#
-# Connections can be configured with the following options:
-#
-#     database    : 'example_db_name'
-#     user        : 'example_user'
-#     password    : 'example_pass'
-#     host        : 'localhost'
-#     port        : 5432
-#
-# Additionally, the following options allow selective disabling of charts
-#
-#     table_stats : false
-#     index_stats : false
-#     database_poll : 'dbase_name1 dbase_name2' # poll only specified databases (all other will be excluded from charts)
-#
-# Postgres permissions are configured at its pg_hba.conf file. You can
-# "trust" local clients to allow netdata to connect, or you can create
-# a postgres user for netdata and add its password below to allow
-# netdata connect.
-#
-# Postgres supported versions are : 
-# - 9.3 (without autovacuum)
-# - 9.4
-# - 9.5
-# - 9.6
-# - 10
-#
-# Superuser access is needed for theses charts:
-#   Write-Ahead Logs
-#   Archive Write-Ahead Logs
-#
-# Autovacuum charts is allowed since Postgres 9.4
-# ----------------------------------------------------------------------
-
-socket:
-    name     : 'local'
-    user     : 'postgres'
-    database : 'postgres'
-
-tcp:
-    name     : 'local'
-    database : 'postgres'
-    user     : 'postgres'
-    host     : 'localhost'
-    port     : 5432
-
-tcpipv4:
-    name     : 'local'
-    database : 'postgres'
-    user     : 'postgres'
-    host     : '127.0.0.1'
-    port     : 5432
-
-tcpipv6:
-    name     : 'local'
-    database : 'postgres'
-    user     : 'postgres'
-    host     : '::1'
-    port     : 5432
-
diff --git a/conf.d/python.d/powerdns.conf b/conf.d/python.d/powerdns.conf
deleted file mode 100644
index ca6200df1..000000000
--- a/conf.d/python.d/powerdns.conf
+++ /dev/null
@@ -1,78 +0,0 @@
-# netdata python.d.plugin configuration for powerdns
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, apache also supports the following:
-#
-#     url: 'URL'             # the URL to fetch powerdns performance statistics
-#     header:
-#          X-API-Key: 'Key'  # API key
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-# localhost:
-#  name : 'local'
-#  url  : 'http://127.0.0.1:8081/api/v1/servers/localhost/statistics'
-#  header:
-#    X-API-Key: 'change_me'
diff --git a/conf.d/python.d/rabbitmq.conf b/conf.d/python.d/rabbitmq.conf
deleted file mode 100644
index 3f90da8a2..000000000
--- a/conf.d/python.d/rabbitmq.conf
+++ /dev/null
@@ -1,82 +0,0 @@
-# netdata python.d.plugin configuration for rabbitmq
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, rabbitmq plugin also supports the following:
-#
-#     host: 'ipaddress'                # Server ip address or hostname. Default: 127.0.0.1
-#     port: 'port'                     # Rabbitmq port. Default: 15672
-#     scheme: 'scheme'                 # http or https. Default: http
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-local:
- host: '127.0.0.1'
- user: 'guest'
- pass: 'guest'
diff --git a/conf.d/python.d/redis.conf b/conf.d/python.d/redis.conf
deleted file mode 100644
index 6363f6da7..000000000
--- a/conf.d/python.d/redis.conf
+++ /dev/null
@@ -1,112 +0,0 @@
-# netdata python.d.plugin configuration for redis
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, redis also supports the following:
-#
-#     socket: 'path/to/redis.sock'
-#
-#  or
-#     host: 'IP or HOSTNAME' # the host to connect to
-#     port: PORT             # the port to connect to
-#
-#  and
-#     pass: 'password'       # the redis password to use for AUTH command
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-socket1:
-  name     : 'local'
-  socket   : '/tmp/redis.sock'
-  # pass     : ''
-
-socket2:
-  name     : 'local'
-  socket   : '/var/run/redis/redis.sock'
-  # pass     : ''
-
-socket3:
-  name     : 'local'
-  socket   : '/var/lib/redis/redis.sock'
-  # pass     : ''
-
-localhost:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 6379
-  # pass     : ''
-
-localipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 6379
-  # pass     : ''
-
-localipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 6379
-  # pass     : ''
-
diff --git a/conf.d/python.d/retroshare.conf b/conf.d/python.d/retroshare.conf
deleted file mode 100644
index 9c92583f7..000000000
--- a/conf.d/python.d/retroshare.conf
+++ /dev/null
@@ -1,74 +0,0 @@
-# netdata python.d.plugin configuration for RetroShare
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, RetroShare also supports the following:
-#
-# - url: 'url'         # the URL to the WebUI
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-    name: 'local'
-    url: 'http://localhost:9090'
diff --git a/conf.d/python.d/samba.conf b/conf.d/python.d/samba.conf
deleted file mode 100644
index ee513c60f..000000000
--- a/conf.d/python.d/samba.conf
+++ /dev/null
@@ -1,62 +0,0 @@
-# netdata python.d.plugin configuration for samba
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-update_every: 5
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
\ No newline at end of file
diff --git a/conf.d/python.d/sensors.conf b/conf.d/python.d/sensors.conf
deleted file mode 100644
index 83bbffd7d..000000000
--- a/conf.d/python.d/sensors.conf
+++ /dev/null
@@ -1,63 +0,0 @@
-# netdata python.d.plugin configuration for sensors
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# Limit the number of sensors types.
-# Comment the ones you want to disable.
-# Also, re-arranging this list controls the order of the charts at the
-# netdata dashboard.
-
-types:
-  - temperature
-  - fan
-  - voltage
-  - current
-  - power
-  - energy
-  - humidity
-
-# ----------------------------------------------------------------------
-# Limit the number of sensors chips.
-# Uncomment the first line (chips:) and add chip names below it.
-# The chip names that start with like that will be matched.
-# You can find the chip names using the sensors command.
-
-#chips:
-#  - i8k
-#  - coretemp
-#
-# chip names can be found using the sensors shell command
-# the prefix is matched (anything that starts like that)
-#
-#----------------------------------------------------------------------
-
diff --git a/conf.d/python.d/smartd_log.conf b/conf.d/python.d/smartd_log.conf
deleted file mode 100644
index 3fab3f1c0..000000000
--- a/conf.d/python.d/smartd_log.conf
+++ /dev/null
@@ -1,90 +0,0 @@
-# netdata python.d.plugin configuration for smartd log
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, smartd_log also supports the following:
-#
-#    log_path: '/path/to/smartdlogs'    # path to smartd log files. Default is /var/log/smartd
-#    raw_values: yes                    # enable/disable raw values charts. Enabled by default.
-#    smart_attributes: '1 2 3 4 44'     # smart attributes charts. Default are ['1', '4', '5', '7', '9', '12', '193', '194', '197', '198', '200'].
-#    exclude_disks: 'PATTERN1 PATTERN2' # space separated patterns. If the pattern is in the drive name, the module will not collect data for it.
-#
-# ----------------------------------------------------------------------
-# Additional information
-#  Plugin reads smartd log files (-A option).
-#  You need to add (man smartd) to /etc/default/smartmontools '-i 600 -A /var/log/smartd/' to pass additional options to smartd on startup
-#  Then restart smartd service and check /path/log/smartdlogs
-#  ls /var/log/smartd/
-#  CDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv  WDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv  ZDC_WD10EZEX_00BN5A0-WD_WCC3F7FLVZS9.ata.csv
-#
-# Smartd APPEND logs at every run. Its NOT RECOMMENDED to set '-i' option below 60 sec.
-# STRONGLY RECOMMENDED to create smartd conf file for logrotate
-#
-# RAW vs NORMALIZED values
-# "Normalized value", commonly referred to as just "value". This is a most universal measurement, on the scale from 0 (bad) to some maximum (good) value.
-# Maximum values are typically 100, 200 or 253. Rule of thumb is: high values are good, low values are bad.
-#
-# "Raw value" - the value of the attribute as it is tracked by the device, before any normalization takes place.
-# Some raw numbers provide valuable insight when properly interpreted. These cases will be discussed later on.
-# Raw values are typically listed in hexadecimal numbers. The raw value has different structure for different vendors and is often not meaningful as a decimal number.
-#
-# ----------------------------------------------------------------------
diff --git a/conf.d/python.d/springboot.conf b/conf.d/python.d/springboot.conf
deleted file mode 100644
index 40b5fb437..000000000
--- a/conf.d/python.d/springboot.conf
+++ /dev/null
@@ -1,120 +0,0 @@
-# netdata python.d.plugin configuration for springboot
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, this plugin also supports the following:
-#
-#     url: 'http://127.0.0.1/metrics'       # the URL of the spring boot actuator metrics
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-#     defaults:
-#       [chart_id]: true | false    # enables/disables default charts, defaults true.
-#     extras: {}              # defines extra charts to monitor, please see the example below
-#     - id: [chart_id]
-#       options: {}
-#       lines: []
-#
-# If all defaults is disabled and no extra charts are defined, this module will disable itself, as it has no data to
-# collect.
-#
-# Configuration example
-# ---------------------
-# expample:
-#   name: 'example'
-#   url: 'http://localhost:8080/metrics'
-#   defaults:
-#     response_code: true
-#     threads: true
-#     gc_time: true
-#     gc_ope: true
-#     heap: false
-#   extras:
-#   - id: 'heap'
-#     options: { title: 'Heap Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap', charttype: 'stacked' }
-#     lines:
-#     - { dimension: 'mem_free',              name: 'free'}
-#     - { dimension: 'mempool_eden_used',     name: 'eden',     algorithm: 'absolute', multiplier: 1, divisor: 1}
-#     - { dimension: 'mempool_survivor_used', name: 'survivor', algorithm: 'absolute', multiplier: 1, divisor: 1}
-#     - { dimension: 'mempool_tenured_used',  name: 'tenured',  algorithm: 'absolute', multiplier: 1, divisor: 1}
-#   - id: 'heap_eden'
-#     options: { title: 'Eden Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_eden', charttype: 'area' }
-#     lines:
-#     - { dimension: 'mempool_eden_used',      name: 'used'}
-#     - { dimension: 'mempool_eden_committed', name: 'commited'}
-#   - id: 'heap_survivor'
-#     options: { title: 'Survivor Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_survivor', charttype: 'area' }
-#     lines:
-#     - { dimension: 'mempool_survivor_used',      name: 'used'}
-#     - { dimension: 'mempool_survivor_committed', name: 'commited'}
-#   - id: 'heap_tenured'
-#     options: { title: 'Tenured Memory Usage', units: 'KB', family: 'heap memory', context: 'springboot.heap_tenured', charttype: 'area' }
-#     lines:
-#     - { dimension: 'mempool_tenured_used',      name: 'used'}
-#     - { dimension: 'mempool_tenured_committed', name: 'commited'}
-
-
-local:
-  name: 'local'
-  url: 'http://localhost:8080/metrics'
-
-local_ip:
-  name: 'local'
-  url: 'http://127.0.0.1:8080/metrics'
diff --git a/conf.d/python.d/squid.conf b/conf.d/python.d/squid.conf
deleted file mode 100644
index 564187f00..000000000
--- a/conf.d/python.d/squid.conf
+++ /dev/null
@@ -1,169 +0,0 @@
-# netdata python.d.plugin configuration for squid
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, squid also supports the following:
-#
-#     host   : 'IP or HOSTNAME' # the host to connect to
-#     port   : PORT             # the port to connect to
-#     request: 'URL'            # the URL to request from squid
-#
-
-# ----------------------------------------------------------------------
-# SQUID CONFIGURATION
-#
-# See:
-# http://wiki.squid-cache.org/Features/CacheManager
-#
-# In short, add to your squid configuration these:
-#
-# http_access allow localhost manager
-# http_access deny manager
-#
-# To remotely monitor a squid:
-#
-# acl managerAdmin src 192.0.2.1
-# http_access allow localhost manager
-# http_access allow managerAdmin manager
-# http_access deny manager
-#
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-tcp3128old:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 3128
-  request  : 'cache_object://localhost:3128/counters'
-
-tcp8080old:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 8080
-  request  : 'cache_object://localhost:3128/counters'
-
-tcp3128new:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 3128
-  request  : '/squid-internal-mgr/counters'
-
-tcp8080new:
-  name     : 'local'
-  host     : 'localhost'
-  port     : 8080
-  request  : '/squid-internal-mgr/counters'
-
-# IPv4
-
-tcp3128oldipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 3128
-  request  : 'cache_object://127.0.0.1:3128/counters'
-
-tcp8080oldipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 8080
-  request  : 'cache_object://127.0.0.1:3128/counters'
-
-tcp3128newipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 3128
-  request  : '/squid-internal-mgr/counters'
-
-tcp8080newipv4:
-  name     : 'local'
-  host     : '127.0.0.1'
-  port     : 8080
-  request  : '/squid-internal-mgr/counters'
-
-# IPv6
-
-tcp3128oldipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 3128
-  request  : 'cache_object://[::1]:3128/counters'
-
-tcp8080oldipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 8080
-  request  : 'cache_object://[::1]:3128/counters'
-
-tcp3128newipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 3128
-  request  : '/squid-internal-mgr/counters'
-
-tcp8080newipv6:
-  name     : 'local'
-  host     : '::1'
-  port     : 8080
-  request  : '/squid-internal-mgr/counters'
-
diff --git a/conf.d/python.d/tomcat.conf b/conf.d/python.d/tomcat.conf
deleted file mode 100644
index c63f06cfa..000000000
--- a/conf.d/python.d/tomcat.conf
+++ /dev/null
@@ -1,91 +0,0 @@
-# netdata python.d.plugin configuration for tomcat
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, tomcat also supports the following:
-#
-#     url: 'URL'       # the URL to fetch nginx's status stats
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# if you have multiple connectors, the following are supported:
-#
-#     connector_name: 'ajp-bio-8009' # default is null, which use first connector in status XML
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-
-localhost:
-  name : 'local'
-  url  : 'http://localhost:8080/manager/status?XML=true'
-
-localipv4:
-  name : 'local'
-  url  : 'http://127.0.0.1:8080/manager/status?XML=true'
-
-localipv6:
-  name : 'local'
-  url  : 'http://[::1]:8080/manager/status?XML=true'
diff --git a/conf.d/python.d/traefik.conf b/conf.d/python.d/traefik.conf
deleted file mode 100644
index 909b9e549..000000000
--- a/conf.d/python.d/traefik.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# netdata python.d.plugin configuration for traefik health data API
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 10             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, traefik plugin also supports the following:
-#
-#     url: '<scheme>://<host>:<port>/<health_page_api>'
-#     # http://localhost:8080/health
-#
-# if the URL is password protected, the following are supported:
-#
-#     user: 'username'
-#     pass: 'password'
-#
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them will run (they have the same name)
-#
-local:
- url: 'http://localhost:8080/health'
diff --git a/conf.d/python.d/varnish.conf b/conf.d/python.d/varnish.conf
deleted file mode 100644
index 4b069d514..000000000
--- a/conf.d/python.d/varnish.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-# netdata python.d.plugin configuration for varnish
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# ----------------------------------------------------------------------
diff --git a/conf.d/python.d/web_log.conf b/conf.d/python.d/web_log.conf
deleted file mode 100644
index c185f8d85..000000000
--- a/conf.d/python.d/web_log.conf
+++ /dev/null
@@ -1,195 +0,0 @@
-# netdata python.d.plugin configuration for web log
-#
-# This file is in YaML format. Generally the format is:
-#
-# name: value
-#
-# There are 2 sections:
-#  - global variables
-#  - one or more JOBS
-#
-# JOBS allow you to collect values from multiple sources.
-# Each source will have its own set of charts.
-#
-# JOB parameters have to be indented (using spaces only, example below).
-
-# ----------------------------------------------------------------------
-# Global Variables
-# These variables set the defaults for all JOBs, however each JOB
-# may define its own, overriding the defaults.
-
-# update_every sets the default data collection frequency.
-# If unset, the python.d.plugin default is used.
-# update_every: 1
-
-# priority controls the order of charts at the netdata dashboard.
-# Lower numbers move the charts towards the top of the page.
-# If unset, the default for python.d.plugin is used.
-# priority: 60000
-
-# retries sets the number of retries to be made in case of failures.
-# If unset, the default for python.d.plugin is used.
-# Attempts to restore the service are made once every update_every
-# and only if the module has collected values in the past.
-# retries: 60
-
-# autodetection_retry sets the job re-check interval in seconds.
-# The job is not deleted if check fails.
-# Attempts to start the job are made once every autodetection_retry.
-# This feature is disabled by default.
-# autodetection_retry: 0
-
-# ----------------------------------------------------------------------
-# JOBS (data collection sources)
-#
-# The default JOBS share the same *name*. JOBS with the same name
-# are mutually exclusive. Only one of them will be allowed running at
-# any time. This allows autodetection to try several alternatives and
-# pick the one that works.
-#
-# Any number of jobs is supported.
-
-# ----------------------------------------------------------------------
-# PLUGIN CONFIGURATION
-#
-# All python.d.plugin JOBS (for all its modules) support a set of
-# predefined parameters. These are:
-#
-# job_name:
-#     name: myname            # the JOB's name as it will appear at the
-#                             # dashboard (by default is the job_name)
-#                             # JOBs sharing a name are mutually exclusive
-#     update_every: 1         # the JOB's data collection frequency
-#     priority: 60000         # the JOB's order on the dashboard
-#     retries: 60             # the JOB's number of restoration attempts
-#     autodetection_retry: 0  # the JOB's re-check interval in seconds
-#
-# Additionally to the above, web_log also supports the following:
-#
-#     path: 'PATH'                        # the path to web server log file
-#     path: 'PATH[0-9]*[0-9]'             # log files with date suffix are also supported
-#     detailed_response_codes: yes/no     # default: yes. Additional chart where response codes are not grouped
-#     detailed_response_aggregate: yes/no # default: yes. Not aggregated detailed response codes charts
-#     all_time : yes/no                   # default: yes. All time unique client IPs chart (50000 addresses ~ 400KB)
-#     filter:                             # filter with regex
-#          include: 'REGEX'               # only those rows that matches the regex
-#          exclude: 'REGEX'               # all rows except those that matches the regex
-#     categories:                         # requests per url chart configuration
-#          cacti: 'cacti.*'               # name(dimension): REGEX to match
-#          observium: 'observium.*'       # name(dimension): REGEX to match
-#          stub_status: 'stub_status'     # name(dimension): REGEX to match
-#     user_defined:                       # requests per pattern in <user_defined> field (custom_log_format)
-#          cacti: 'cacti.*'               # name(dimension): REGEX to match
-#          observium: 'observium.*'       # name(dimension): REGEX to match
-#          stub_status: 'stub_status'     # name(dimension): REGEX to match
-#     custom_log_format:                  # define a custom log format
-#          pattern: '(?P<address>[\da-f.:]+) -.*?"(?P<method>[A-Z]+) (?P<url>.*?)" (?P<code>[1-9]\d{2}) (?P<bytes_sent>\d+) (?P<resp_length>\d+) (?P<resp_time>\d+\.\d+) '
-#          time_multiplier: 1000000       # type <int> - convert time to microseconds
-#     histogram: [1,3,10,30,100, ...]      # type list of int - Cumulative histogram of response time in milli seconds
-
-# ----------------------------------------------------------------------
-# WEB SERVER CONFIGURATION
-#
-# Make sure the web server log directory and the web server log files
-# can be read by user 'netdata'.
-#
-# To enable the timings chart and the requests size dimension, the
-# web server needs to log them. This is how to add them:
-#
-# nginx:
-#   log_format netdata '$remote_addr - $remote_user [$time_local] '
-#                      '"$request" $status $body_bytes_sent '
-#                      '$request_length $request_time $upstream_response_time '
-#                      '"$http_referer" "$http_user_agent"';
-#   access_log /var/log/nginx/access.log netdata;
-#
-# apache (you need mod_logio enabled):
-#   LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" vhost_netdata
-#   LogFormat "%h %l %u %t \"%r\" %>s %O %I %D \"%{Referer}i\" \"%{User-Agent}i\"" netdata
-#   CustomLog "/var/log/apache2/access.log" netdata
-
-# ----------------------------------------------------------------------
-# AUTO-DETECTION JOBS
-# only one of them per web server will run (when they have the same name)
-
-
-# -------------------------------------------
-# nginx log on various distros
-
-# debian, arch
-nginx_log:
-  name: 'nginx'
-  path: '/var/log/nginx/access.log'
-
-# gentoo
-nginx_log2:
-  name: 'nginx'
-  path: '/var/log/nginx/localhost.access_log'
-
-
-# -------------------------------------------
-# apache log on various distros
-
-# debian
-apache_log:
-  name: 'apache'
-  path: '/var/log/apache2/access.log'
-
-# gentoo
-apache_log2:
-  name: 'apache'
-  path: '/var/log/apache2/access_log'
-
-# arch
-apache_log3:
-  name: 'apache'
-  path: '/var/log/httpd/access_log'
-
-# debian
-apache_vhosts_log:
-  name: 'apache_vhosts'
-  path: '/var/log/apache2/other_vhosts_access.log'
-
-
-# -------------------------------------------
-# gunicorn log on various distros
-
-gunicorn_log:
-  name: 'gunicorn'
-  path: '/var/log/gunicorn/access.log'
-
-gunicorn_log2:
-  name: 'gunicorn'
-  path: '/var/log/gunicorn/gunicorn-access.log'
-
-# -------------------------------------------
-# Apache Cache
-apache_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/apache/cache.log'
-
-apache2_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/apache2/cache.log'
-
-httpd_cache:
-  name: 'apache_cache'
-  type: 'apache_cache'
-  path: '/var/log/httpd/cache.log'
-
-# -------------------------------------------
-# Squid
-
-# debian/ubuntu
-squid_log1:
-  name: 'squid'
-  type: 'squid'
-  path: '/var/log/squid3/access.log'
-
-#gentoo
-squid_log2:
-  name: 'squid'
-  type: 'squid'
-  path: '/var/log/squid/access.log'