Merging upstream version 1.17.0.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 69 insertions, 70 deletions

diff --git a/daemon/config/README.md b/daemon/config/README.md
index c36a5b6db..dd032dbb7 100644
--- a/daemon/config/README.md
+++ b/daemon/config/README.md
@@ -1,6 +1,5 @@
 # Daemon configuration
 
-
 <details markdown="1"><summary>The daemon configuration file is read from `/etc/netdata/netdata.conf`.</summary>
 Depending on your installation method, Netdata will have been installed either directly under `/`, or under `/opt/netdata`. The paths mentioned here and in the documentation in general assume that your installation is under `/`. If it is not, you will find the exact same paths under `/opt/netdata` as well. (i.e. `/etc/netdata` will be `/opt/netdata/etc/netdata`).</details>
 
@@ -8,21 +7,21 @@ This config file **is not needed by default**. Netdata works fine out of the box
 
 `netdata.conf` has sections stated with `[section]`. You will see the following sections:
 
-1. `[global]` to [configure](#global-section-options) the [netdata daemon](../).
-2. `[web]` to [configure the web server](../../web/server).
-3. `[plugins]` to [configure](#plugins-section-options) which [collectors](../../collectors) to use and PATH settings.
-4. `[health]` to [configure](#health-section-options) general settings for [health monitoring](../../health)
-5. `[registry]` for the [netdata registry](../../registry).
-6. `[backend]` to set up [streaming and replication](../../streaming) options.
-7. `[statsd]` for the general settings of the [stats.d.plugin](../../collectors/statsd.plugin).
-8. `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration).
-9. `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration).
+1.  `[global]` to [configure](#global-section-options) the [Netdata daemon](../).
+2.  `[web]` to [configure the web server](../../web/server).
+3.  `[plugins]` to [configure](#plugins-section-options) which [collectors](../../collectors) to use and PATH settings.
+4.  `[health]` to [configure](#health-section-options) general settings for [health monitoring](../../health)
+5.  `[registry]` for the [Netdata registry](../../registry).
+6.  `[backend]` to set up [streaming and replication](../../streaming) options.
+7.  `[statsd]` for the general settings of the [stats.d.plugin](../../collectors/statsd.plugin).
+8.  `[plugin:NAME]` sections for each collector plugin, under the comment [Per plugin configuration](#per-plugin-configuration).
+9.  `[CHART_NAME]` sections for each chart defined, under the comment [Per chart configuration](#per-chart-configuration).
 
-The configuration file is a `name = value` dictionary. Netdata will not complain if you set options unknown to it. When you check the running configuration by accessing the URL `/netdata.conf` on your netdata server, netdata will add a comment on settings it does not currently use.
+The configuration file is a `name = value` dictionary. Netdata will not complain if you set options unknown to it. When you check the running configuration by accessing the URL `/netdata.conf` on your Netdata server, Netdata will add a comment on settings it does not currently use.
 
 ## Applying changes
 
-After `netdata.conf` has been modified, netdata needs to be restarted for changes to apply:
+After `netdata.conf` has been modified, Netdata needs to be restarted for changes to apply:
 
 ```bash
 sudo service netdata restart
@@ -40,41 +39,41 @@ Please note that your data history will be lost if you have modified `history` p
 
 ### [global] section options
 
-setting | default | info
-:------:|:-------:|:----
-process scheduling policy | `keep` |  See [netdata process scheduling policy](../#netdata-process-scheduling-policy)
-OOM score | `1000` |  See [OOM score](../#oom-score)
-glibc malloc arena max for plugins | `1` |  See [Virtual memory](../#virtual-memory).
-glibc malloc arena max for netdata | `1` |  See [Virtual memory](../#virtual-memory).
-hostname | auto-detected | The hostname of the computer running netdata.
-history | `3996` | The number of entries the netdata daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information.
-update every | `1` | The frequency in seconds, for data collection. For more information see [Performance](../../docs/Performance.md#performance).
-config directory | `/etc/netdata` | The directory configuration files are kept.
-stock config directory | `/usr/lib/netdata/conf.d` |
-log directory | `/var/log/netdata` | The directory in which the [log files](../#log-files) are kept.
-web files directory | `/usr/share/netdata/web` | The directory the web static files are kept.
-cache directory | `/var/cache/netdata` | The directory the memory database will be stored if and when netdata exits. Netdata will re-read the database when it will start again, to continue from the same point.
-lib directory | `/var/lib/netdata` | Contains the alarm log and the netdata instance guid.
-home directory | `/var/cache/netdata` | Contains the db files for the collected metrics
-plugins directory | `"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"` | The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes.
-memory mode | `save` | When set to `save` netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of netdata). When set to `dbengine` it behaves similarly to `map` but with much better disk and memory efficiency, however, with higher overhead. When set to `ram` the round robin database will be temporary and it will be lost when netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix | | This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43).
-memory deduplication (ksm) | `yes` | When set to `yes`, netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm)
-TZ environment variable | `:/etc/localtime` | Where to find the timezone
-timezone | auto-detected | The timezone retrieved from the environment variable
-debug flags | `0x0000000000000000` | Bitmap of debug options to enable. For more information check [Tracing Options](../#debugging).
-debug log | `/var/log/netdata/debug.log` | The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](../#debugging).
-error log | `/var/log/netdata/error.log` | The filename to save error messages for netdata daemon and all plugins (`stderr` is sent here for all netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log.
-access log | `/var/log/netdata/access.log` | The filename to save the log of web clients accessing netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log.
-errors flood protection period | `1200` | UNUSED - Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`.
-errors to trigger flood protection | `200` |  UNUSED - Number of errors written to the log in `errors flood protection period` sec before flood protection is activated.
-run as user | `netdata` | The user netdata will run as.
-pthread stack size | auto-detected |
-cleanup obsolete charts after seconds | `3600` |  See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions
-gap when lost iterations above | `1` |
-cleanup orphan hosts after seconds | `3600` |  How long to wait until automatically removing from the DB a remote netdata host (slave) that is no longer sending data.
-delete obsolete charts files | `yes` |  See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions
-delete orphan hosts files | `yes` |  Set to `no` to disable non-responsive host removal.
-enable zero metrics | `no` |  Set to `yes` to show charts when all their metrics are zero.
+| setting|default|info|||
+|:-----:|:-----:|:---|---|---|
+| process scheduling policy|`keep`|See [Netdata process scheduling policy](../#netdata-process-scheduling-policy)|||
+| OOM score|`1000`|See [OOM score](../#oom-score)|||
+| glibc malloc arena max for plugins|`1`|See [Virtual memory](../#virtual-memory).|||
+| glibc malloc arena max for Netdata|`1`|See [Virtual memory](../#virtual-memory).|||
+| hostname|auto-detected|The hostname of the computer running Netdata.|||
+| history|`3996`|The number of entries the `netdata` daemon will by default keep in memory for each chart dimension. This setting can also be configured per chart. Check [Memory Requirements](../../database/#database) for more information.|||
+| update every|`1`|The frequency in seconds, for data collection. For more information see [Performance](../../docs/Performance.md#performance).|||
+| config directory|`/etc/netdata`|The directory configuration files are kept.|||
+| stock config directory|`/usr/lib/netdata/conf.d`||||
+| log directory|`/var/log/netdata`|The directory in which the [log files](../#log-files) are kept.|||
+| web files directory|`/usr/share/netdata/web`|The directory the web static files are kept.|||
+| cache directory|`/var/cache/netdata`|The directory the memory database will be stored if and when Netdata exits. Netdata will re-read the database when it will start again, to continue from the same point.|||
+| lib directory|`/var/lib/netdata`|Contains the alarm log and the Netdata instance guid.|||
+| home directory|`/var/cache/netdata`|Contains the db files for the collected metrics|||
+| plugins directory|`"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"`|The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes.|||
+| memory mode|`save`|When set to `save` Netdata will save its round robin database on exit and load it on startup. When set to `map` the cache files will be updated in real time (check `man mmap` - do not set this on systems with heavy load or slow disks - the disks will continuously sync the in-memory database of Netdata). When set to `dbengine` it behaves similarly to `map` but with much better disk and memory efficiency, however, with higher overhead. When set to `ram` the round robin database will be temporary and it will be lost when Netdata exits. `none` disables the database at this host. This also disables health monitoring (there cannot be health monitoring without a database). host access prefix||This is used in docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check [issue 43](https://github.com/netdata/netdata/issues/43).|
+| memory deduplication (ksm)|`yes`|When set to `yes`, Netdata will offer its in-memory round robin database to kernel same page merging (KSM) for deduplication. For more information check [Memory Deduplication - Kernel Same Page Merging - KSM](../../database/#ksm)|||
+| TZ environment variable|`:/etc/localtime`|Where to find the timezone|||
+| timezone|auto-detected|The timezone retrieved from the environment variable|||
+| debug flags|`0x0000000000000000`|Bitmap of debug options to enable. For more information check [Tracing Options](../#debugging).|||
+| debug log|`/var/log/netdata/debug.log`|The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to `syslog` to send the debug messages to syslog, or `none` to disable this log. For more information check [Tracing Options](../#debugging).|||
+| error log|`/var/log/netdata/error.log`|The filename to save error messages for Netdata daemon and all plugins (`stderr` is sent here for all Netdata programs, including the plugins). You can also set it to `syslog` to send the errors to syslog, or `none` to disable this log.|||
+| access log|`/var/log/netdata/access.log`|The filename to save the log of web clients accessing Netdata charts. You can also set it to `syslog` to send the access log to syslog, or `none` to disable this log.|||
+| errors flood protection period|`1200`|UNUSED - Length of period (in sec) during which the number of errors should not exceed the `errors to trigger flood protection`.|||
+| errors to trigger flood protection|`200`|UNUSED - Number of errors written to the log in `errors flood protection period` sec before flood protection is activated.|||
+| run as user|`netdata`|The user Netdata will run as.|||
+| pthread stack size|auto-detected||||
+| cleanup obsolete charts after seconds|`3600`|See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also sets the timeout for cleaning up obsolete dimensions|||
+| gap when lost iterations above|`1`||||
+| cleanup orphan hosts after seconds|`3600`|How long to wait until automatically removing from the DB a remote Netdata host (slave) that is no longer sending data.|||
+| delete obsolete charts files|`yes`|See [monitoring ephemeral containers](../../collectors/cgroups.plugin/#monitoring-ephemeral-containers), also affects the deletion of files for obsolete dimensions|||
+| delete orphan hosts files|`yes`|Set to `no` to disable non-responsive host removal.|||
+| enable zero metrics|`no`|Set to `yes` to show charts when all their metrics are zero.|||
 
 ### [web] section options
 
@@ -86,13 +85,13 @@ In this section you will see be a boolean (`yes`/`no`) option for each plugin (e
 
 Additionally, there will be the following options:
 
-setting | default | info
-:------:|:-------:|:----
-PATH environment variable | `auto-detected` |
-PYTHONPATH environment variable | | Used to set a custom python path
-enable running new plugins | `yes` | When set to `yes`, netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes`
-check for new plugins every | 60 | The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for netdata.
-checks | `no` | This is a debugging plugin for the internal latency
+| setting|default|info|
+|:-----:|:-----:|:---|
+| PATH environment variable|`auto-detected`||
+| PYTHONPATH environment variable||Used to set a custom python path|
+| enable running new plugins|`yes`|When set to `yes`, Netdata will enable detected plugins, even if they are not configured explicitly. Setting this to `no` will only enable plugins explicitly configirued in this file with a `yes`|
+| check for new plugins every|60|The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for Netdata.|
+| checks|`no`|This is a debugging plugin for the internal latency|
 
 ### [health] section options
 
@@ -102,16 +101,16 @@ Specific alarms are configured in per-collector config files under the `health.d
 
 [Alarm notifications](../../health/notifications/#netdata-alarm-notifications) are configured in `health_alarm_notify.conf`.
 
-setting | default | info
-:------:|:-------:|:----
-enabled | `yes` | Set to `no` to disable all alarms and notifications
-in memory max health log entries | 1000 | Size of the alarm history held in RAM
-script to execute on alarm | `/usr/libexec/netdata/plugins.d/alarm-notify.sh` | The script that sends alarm notifications. Note that in versions before 1.16, the plugins.d directory may be installed in a different location in certain OSs (e.g. under `/usr/lib/netdata`).
-stock health configuration directory | `/usr/lib/netdata/conf.d/health.d` | Contains the stock alarm configuration files for each collector
-health configuration directory | `/etc/netdata/health.d` | The directory containing the user alarm configuration files, to override the stock configurations
-run at least every seconds | `10` | Controls how often all alarm conditions should be evaluated.
-postpone alarms during hibernation for seconds | `60` | Prevents false alarms. May need to be increased if you get alarms during hibernation.
-rotate log every lines | 2000 | Controls the number of alarm log entries stored in `<lib directory>/health-log.db`, where `<lib directory>` is the one configured in the [[global] section](#global-section-options)
+| setting|default|info|
+|:-----:|:-----:|:---|
+| enabled|`yes`|Set to `no` to disable all alarms and notifications|
+| in memory max health log entries|1000|Size of the alarm history held in RAM|
+| script to execute on alarm|`/usr/libexec/netdata/plugins.d/alarm-notify.sh`|The script that sends alarm notifications. Note that in versions before 1.16, the plugins.d directory may be installed in a different location in certain OSs (e.g. under `/usr/lib/netdata`).|
+| stock health configuration directory|`/usr/lib/netdata/conf.d/health.d`|Contains the stock alarm configuration files for each collector|
+| health configuration directory|`/etc/netdata/health.d`|The directory containing the user alarm configuration files, to override the stock configurations|
+| run at least every seconds|`10`|Controls how often all alarm conditions should be evaluated.|
+| postpone alarms during hibernation for seconds|`60`|Prevents false alarms. May need to be increased if you get alarms during hibernation.|
+| rotate log every lines|2000|Controls the number of alarm log entries stored in `<lib directory>/health-log.db`, where `<lib directory>` is the one configured in the [\[global\] section](#global-section-options)|
 
 ### [registry] section options
 
@@ -129,16 +128,16 @@ The configuration options for plugins appear in sections following the pattern `
 
 Most internal plugins will provide additional options. Check [Internal Plugins](../../collectors/) for more information.
 
-Please note, that by default Netdata will enable monitoring metrics for disks, memory, and network only when they are not zero. If they are constantly zero they are ignored. Metrics that will start having values, after netdata is started, will be detected and charts will be automatically added to the dashboard (a refresh of the dashboard is needed for them to appear though). Use `yes` instead of `auto` in plugin configuration sections to enable these charts permanently. You can also set the `enable zero metrics` option to `yes` in the `[global]` section which enables charts with zero metrics for all internal Netdata plugins.
+Please note, that by default Netdata will enable monitoring metrics for disks, memory, and network only when they are not zero. If they are constantly zero they are ignored. Metrics that will start having values, after Netdata is started, will be detected and charts will be automatically added to the dashboard (a refresh of the dashboard is needed for them to appear though). Use `yes` instead of `auto` in plugin configuration sections to enable these charts permanently. You can also set the `enable zero metrics` option to `yes` in the `[global]` section which enables charts with zero metrics for all internal Netdata plugins.
 
 #### External plugins
 
 External plugins will have only 2 options at `netdata.conf`:
 
-setting | default | info
-:------:|:-------:|:----
-update every|the value of `[global].update every` setting|The frequency in seconds the plugin should collect values. For more information check [Performance](../../docs/Performance.md#performance).
-command options|*empty*|Additional command line options to pass to the plugin.
+| setting | default | info |
+| :-----:|:-----:|:---|
+| update every | the value of `[global].update every` setting|The frequency in seconds the plugin should collect values. For more information check [Performance](../../docs/Performance.md#performance).|
+| command options | _empty_ | Additional command line options to pass to the plugin.|
 
 External plugins that need additional configuration may support a dedicated file in `/etc/netdata`. Check their documentation.
 
@@ -146,4 +145,4 @@ External plugins that need additional configuration may support a dedicated file
 
 In this section you will find a separate subsection for each chart shown on the dashboard. You can control all aspects of a specific chart here. You can understand what each option does by reading [how charts are defined](../../collectors/plugins.d/#chart). If you don't know how to find the name of a chart, you can learn about it [here](../../docs/Charts.md).
 
-[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdaemon%2Fconfig%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fdaemon%2Fconfig%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)