summaryrefslogtreecommitdiffstats
path: root/exporting/graphite
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2023-10-17 09:30:23 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2023-10-17 09:30:23 +0000
commit517a443636daa1e8085cb4e5325524a54e8a8fd7 (patch)
tree5352109cc7cd5122274ab0cfc1f887b685f04edf /exporting/graphite
parentReleasing debian version 1.42.4-1. (diff)
downloadnetdata-517a443636daa1e8085cb4e5325524a54e8a8fd7.tar.xz
netdata-517a443636daa1e8085cb4e5325524a54e8a8fd7.zip
Merging upstream version 1.43.0.
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'exporting/graphite')
l---------[-rw-r--r--]exporting/graphite/README.md129
-rw-r--r--exporting/graphite/integrations/blueflood.md172
-rw-r--r--exporting/graphite/integrations/graphite.md172
-rw-r--r--exporting/graphite/integrations/influxdb.md172
-rw-r--r--exporting/graphite/integrations/kairosdb.md172
5 files changed, 689 insertions, 128 deletions
diff --git a/exporting/graphite/README.md b/exporting/graphite/README.md
index 2ef436cf5..15f360d17 100644..120000
--- a/exporting/graphite/README.md
+++ b/exporting/graphite/README.md
@@ -1,128 +1 @@
-# Export metrics to Graphite providers
-
-You can use the Graphite connector for
-the [exporting engine](https://github.com/netdata/netdata/blob/master/exporting/README.md) to archive your agent's
-metrics to Graphite providers for long-term storage, further analysis, or correlation with data from other sources.
-
-## Prerequisites
-
-You have already [installed Netdata](https://github.com/netdata/netdata/edit/master/packaging/installer/README.md) and
-Graphite.
-
-## Configuration
-
-Begin by using `edit-config` to open the `exporting.conf` file.
-
-```bash
-cd /etc/netdata # Replace this path with your Netdata config directory
-sudo ./edit-config exporting.conf
-```
-
-Enable the exporting engine by setting `enabled` to `yes` in the `[exporting:global]` section.
-
-```conf
-[exporting:global]
- enabled = yes
-```
-
-Next, configure the connector. Find the `[graphite:my_graphite_instance]` example section and uncomment the line.
-Set the `destination` setting to `localhost:2003`. By default, the Docker image for Graphite listens on port `2003` for
-incoming metrics. If you installed Graphite a different way, you may need to change the port accordingly.
-
-```conf
-[graphite:netdata]
- enabled = yes
- destination = localhost:2003
- ...
-```
-
-Add `:http` or `:https` modifiers to the connector type if you need to use other than a plaintext protocol. For
-example: `graphite:http:my_graphite_instance`,
-`graphite:https:my_graphite_instance`. You can set basic HTTP authentication credentials using
-
-```conf
- username = my_username
- password = my_password
-```
-
-The final result for a remote, secured host should be the following:
-
-```conf
-[graphite:https:netdata]
- enabled = yes
- username = my_username
- password = my_password
- destination = remote_host_url:2003
- # data source = average
- # prefix = netdata
- # hostname = my_hostname
- # update every = 10
- # buffer on failures = 10
- # timeout ms = 20000
- # send names instead of ids = yes
- # send charts matching = *
- # send hosts matching = localhost *
-```
-
-We'll not worry about the [rest of the settings](https://github.com/netdata/netdata/blob/master/exporting/README.md#options)
- for now. Restart the Agent using `sudo systemctl restart netdata`, or the
-[appropriate method](https://github.com/netdata/netdata/blob/master/docs/configure/start-stop-restart.md) for your
-system, to spin up the exporting engine.
-
-## See and organize Netdata metrics in Graphite
-
-Head back to the Graphite interface again, then click on the **Dashboard** link to get started with Netdata's exported
-metrics. You can also navigate directly to `http://NODE/dashboard`.
-
-Let's switch the interface to help you understand which metrics Netdata is exporting to Graphite. Click on **Dashboard**
-and **Configure UI**, then choose the **Tree** option. Refresh your browser to change the UI.
-
-![Change the Graphite UI](https://user-images.githubusercontent.com/1153921/83798697-77c63500-a659-11ea-8ed5-5e274953c871.png)
-
-You should now see a tree of available contexts, including one that matches the hostname of the Agent exporting metrics.
-In this example, the Agent's hostname is `arcturus`.
-
-Let's add some system CPU charts so you can monitor the long-term health of your system. Click through the tree to find
-**hostname → system → cpu** metrics, then click on the **user** context. A chart with metrics from that context appears
-in the dashboard. Add a few other system CPU charts to flesh things out.
-
-Next, let's combine one or two of these charts. Click and drag one chart onto the other, and wait until the green **Drop
-to merge** dialog appears. Release to merge the charts.
-
-![Merging charts in Graphite](https://user-images.githubusercontent.com/1153921/83817628-1bbfd880-a67a-11ea-81bc-05efc639b6ce.png)
-
-Finally, save your dashboard. Click **Dashboard**, then **Save As**, then choose a name. Your dashboard is now saved.
-
-Of course, this is just the beginning of the customization you can do with Graphite. You can change the time range,
-share your dashboard with others, or use the composer to customize the size and appearance of specific charts. Learn
-more about adding, modifying, and combining graphs in
-the [Graphite docs](https://graphite.readthedocs.io/en/latest/dashboard.html).
-
-## Monitor the exporting engine
-
-As soon as the exporting engine begins, Netdata begins reporting metrics about the system's health and performance.
-
-![Graphs for monitoring the exporting engine](https://user-images.githubusercontent.com/1153921/83800787-e5c02b80-a65c-11ea-865a-c447d2ce4cbb.png)
-
-You can use these charts to verify that Netdata is properly exporting metrics to Graphite. You can even add these
-exporting charts to your Graphite dashboard!
-
-### Add exporting charts to Netdata Cloud
-
-You can also show these exporting engine metrics on Netdata Cloud. If you don't have an account already,
-go [sign in](https://app.netdata.cloud) and get started for free.
-
-Add more metrics to a War Room's Nodes tab by clicking on the **Add metric** button, then typing `exporting` into the
-context field. Choose the exporting contexts you want to add, then click **Add**. You'll see these charts alongside any
-others you've customized in Netdata Cloud.
-
-![Exporting engine metrics in Netdata Cloud](https://user-images.githubusercontent.com/1153921/83902769-db139e00-a711-11ea-828e-aa7e32b04c75.png)
-
-## What's next
-
-What you do with your exported metrics is entirely up to you, but as you might have seen in the Graphite connector
-configuration block, there are many other ways to tweak and customize which metrics you export to Graphite and how
-often.
-
-For full details about each configuration option and what it does, see
-the [exporting reference guide](https://github.com/netdata/netdata/blob/master/exporting/README.md).
+integrations/graphite.md \ No newline at end of file
diff --git a/exporting/graphite/integrations/blueflood.md b/exporting/graphite/integrations/blueflood.md
new file mode 100644
index 000000000..3494045a5
--- /dev/null
+++ b/exporting/graphite/integrations/blueflood.md
@@ -0,0 +1,172 @@
+<!--startmeta
+custom_edit_url: "https://github.com/netdata/netdata/edit/master/exporting/graphite/integrations/blueflood.md"
+meta_yaml: "https://github.com/netdata/netdata/edit/master/exporting/graphite/metadata.yaml"
+sidebar_label: "Blueflood"
+learn_status: "Published"
+learn_rel_path: "Exporting"
+message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE EXPORTER'S metadata.yaml FILE"
+endmeta-->
+
+# Blueflood
+
+
+<img src="https://netdata.cloud/img/blueflood.png" width="150"/>
+
+
+Use the Graphite connector for the exporting engine to archive your Netdata metrics to Graphite providers for long-term storage,
+further analysis, or correlation with data from other sources.
+
+
+
+<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" />
+
+## Setup
+
+### Prerequisites
+
+####
+
+- You have already installed Netdata and Graphite.
+
+
+
+### Configuration
+
+#### File
+
+The configuration file name for this integration is `exporting.conf`.
+
+
+You can edit the configuration file using the `edit-config` script from the
+Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory).
+
+```bash
+cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
+sudo ./edit-config exporting.conf
+```
+#### Options
+
+The following options can be defined for this exporter.
+
+<details><summary>Config options</summary>
+
+| Name | Description | Default | Required |
+|:----|:-----------|:-------|:--------:|
+| enabled | Enables or disables an exporting connector instance (yes/no). | no | True |
+| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | True |
+| username | Username for HTTP authentication | my_username | False |
+| password | Password for HTTP authentication | my_password | False |
+| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | False |
+| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | False |
+| prefix | The prefix to add to all metrics. | netdata | False |
+| update every | Frequency of sending sending data to the external database, in seconds. | 10 | False |
+| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | False |
+| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | False |
+| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | False |
+| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | False |
+| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | False |
+| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | False |
+| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | False |
+
+##### destination
+
+The format of each item in this list, is: [PROTOCOL:]IP[:PORT].
+- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine.
+- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port.
+- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used.
+
+Example IPv4:
+ ```yaml
+ destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003
+ ```
+Example IPv6 and IPv4 together:
+```yaml
+destination = [ffff:...:0001]:2003 10.11.12.1:2003
+```
+When multiple servers are defined, Netdata will try the next one when the previous one fails.
+
+
+##### update every
+
+Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers
+send data to the same database. This randomness does not affect the quality of the data, only the time they are sent.
+
+
+##### buffer on failures
+
+If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it).
+
+
+##### send hosts matching
+
+Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern).
+The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to
+filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts.
+
+A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`,
+use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative).
+
+
+##### send charts matching
+
+A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads,
+use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used,
+positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter
+has a higher priority than the configuration option.
+
+
+##### send names instead of ids
+
+Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names
+are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are
+different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc.
+
+
+</details>
+
+#### Examples
+
+##### Example configuration
+
+Basic configuration
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+
+```
+##### Configuration with HTTPS and HTTP authentication
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+ username = my_username
+ password = my_password
+
+```
+##### Detailed Configuration for a remote, secure host
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:https:netdata]
+ enabled = yes
+ username = my_username
+ password = my_password
+ destination = 10.10.1.114:2003
+ # data source = average
+ # prefix = netdata
+ # hostname = my_hostname
+ # update every = 10
+ # buffer on failures = 10
+ # timeout ms = 20000
+ # send names instead of ids = yes
+ # send charts matching = *
+ # send hosts matching = localhost *
+
+```
+
diff --git a/exporting/graphite/integrations/graphite.md b/exporting/graphite/integrations/graphite.md
new file mode 100644
index 000000000..b550aa3f4
--- /dev/null
+++ b/exporting/graphite/integrations/graphite.md
@@ -0,0 +1,172 @@
+<!--startmeta
+custom_edit_url: "https://github.com/netdata/netdata/edit/master/exporting/graphite/integrations/graphite.md"
+meta_yaml: "https://github.com/netdata/netdata/edit/master/exporting/graphite/metadata.yaml"
+sidebar_label: "Graphite"
+learn_status: "Published"
+learn_rel_path: "Exporting"
+message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE EXPORTER'S metadata.yaml FILE"
+endmeta-->
+
+# Graphite
+
+
+<img src="https://netdata.cloud/img/graphite.png" width="150"/>
+
+
+Use the Graphite connector for the exporting engine to archive your Netdata metrics to Graphite providers for long-term storage,
+further analysis, or correlation with data from other sources.
+
+
+
+<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" />
+
+## Setup
+
+### Prerequisites
+
+####
+
+- You have already installed Netdata and Graphite.
+
+
+
+### Configuration
+
+#### File
+
+The configuration file name for this integration is `exporting.conf`.
+
+
+You can edit the configuration file using the `edit-config` script from the
+Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory).
+
+```bash
+cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
+sudo ./edit-config exporting.conf
+```
+#### Options
+
+The following options can be defined for this exporter.
+
+<details><summary>Config options</summary>
+
+| Name | Description | Default | Required |
+|:----|:-----------|:-------|:--------:|
+| enabled | Enables or disables an exporting connector instance (yes/no). | no | True |
+| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | True |
+| username | Username for HTTP authentication | my_username | False |
+| password | Password for HTTP authentication | my_password | False |
+| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | False |
+| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | False |
+| prefix | The prefix to add to all metrics. | netdata | False |
+| update every | Frequency of sending sending data to the external database, in seconds. | 10 | False |
+| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | False |
+| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | False |
+| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | False |
+| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | False |
+| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | False |
+| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | False |
+| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | False |
+
+##### destination
+
+The format of each item in this list, is: [PROTOCOL:]IP[:PORT].
+- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine.
+- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port.
+- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used.
+
+Example IPv4:
+ ```yaml
+ destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003
+ ```
+Example IPv6 and IPv4 together:
+```yaml
+destination = [ffff:...:0001]:2003 10.11.12.1:2003
+```
+When multiple servers are defined, Netdata will try the next one when the previous one fails.
+
+
+##### update every
+
+Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers
+send data to the same database. This randomness does not affect the quality of the data, only the time they are sent.
+
+
+##### buffer on failures
+
+If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it).
+
+
+##### send hosts matching
+
+Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern).
+The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to
+filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts.
+
+A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`,
+use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative).
+
+
+##### send charts matching
+
+A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads,
+use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used,
+positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter
+has a higher priority than the configuration option.
+
+
+##### send names instead of ids
+
+Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names
+are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are
+different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc.
+
+
+</details>
+
+#### Examples
+
+##### Example configuration
+
+Basic configuration
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+
+```
+##### Configuration with HTTPS and HTTP authentication
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+ username = my_username
+ password = my_password
+
+```
+##### Detailed Configuration for a remote, secure host
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:https:netdata]
+ enabled = yes
+ username = my_username
+ password = my_password
+ destination = 10.10.1.114:2003
+ # data source = average
+ # prefix = netdata
+ # hostname = my_hostname
+ # update every = 10
+ # buffer on failures = 10
+ # timeout ms = 20000
+ # send names instead of ids = yes
+ # send charts matching = *
+ # send hosts matching = localhost *
+
+```
+
diff --git a/exporting/graphite/integrations/influxdb.md b/exporting/graphite/integrations/influxdb.md
new file mode 100644
index 000000000..f365f26e1
--- /dev/null
+++ b/exporting/graphite/integrations/influxdb.md
@@ -0,0 +1,172 @@
+<!--startmeta
+custom_edit_url: "https://github.com/netdata/netdata/edit/master/exporting/graphite/integrations/influxdb.md"
+meta_yaml: "https://github.com/netdata/netdata/edit/master/exporting/graphite/metadata.yaml"
+sidebar_label: "InfluxDB"
+learn_status: "Published"
+learn_rel_path: "Exporting"
+message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE EXPORTER'S metadata.yaml FILE"
+endmeta-->
+
+# InfluxDB
+
+
+<img src="https://netdata.cloud/img/influxdb.svg" width="150"/>
+
+
+Use the Graphite connector for the exporting engine to archive your Netdata metrics to Graphite providers for long-term storage,
+further analysis, or correlation with data from other sources.
+
+
+
+<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" />
+
+## Setup
+
+### Prerequisites
+
+####
+
+- You have already installed Netdata and Graphite.
+
+
+
+### Configuration
+
+#### File
+
+The configuration file name for this integration is `exporting.conf`.
+
+
+You can edit the configuration file using the `edit-config` script from the
+Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory).
+
+```bash
+cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
+sudo ./edit-config exporting.conf
+```
+#### Options
+
+The following options can be defined for this exporter.
+
+<details><summary>Config options</summary>
+
+| Name | Description | Default | Required |
+|:----|:-----------|:-------|:--------:|
+| enabled | Enables or disables an exporting connector instance (yes/no). | no | True |
+| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | True |
+| username | Username for HTTP authentication | my_username | False |
+| password | Password for HTTP authentication | my_password | False |
+| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | False |
+| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | False |
+| prefix | The prefix to add to all metrics. | netdata | False |
+| update every | Frequency of sending sending data to the external database, in seconds. | 10 | False |
+| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | False |
+| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | False |
+| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | False |
+| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | False |
+| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | False |
+| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | False |
+| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | False |
+
+##### destination
+
+The format of each item in this list, is: [PROTOCOL:]IP[:PORT].
+- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine.
+- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port.
+- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used.
+
+Example IPv4:
+ ```yaml
+ destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003
+ ```
+Example IPv6 and IPv4 together:
+```yaml
+destination = [ffff:...:0001]:2003 10.11.12.1:2003
+```
+When multiple servers are defined, Netdata will try the next one when the previous one fails.
+
+
+##### update every
+
+Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers
+send data to the same database. This randomness does not affect the quality of the data, only the time they are sent.
+
+
+##### buffer on failures
+
+If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it).
+
+
+##### send hosts matching
+
+Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern).
+The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to
+filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts.
+
+A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`,
+use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative).
+
+
+##### send charts matching
+
+A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads,
+use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used,
+positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter
+has a higher priority than the configuration option.
+
+
+##### send names instead of ids
+
+Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names
+are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are
+different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc.
+
+
+</details>
+
+#### Examples
+
+##### Example configuration
+
+Basic configuration
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+
+```
+##### Configuration with HTTPS and HTTP authentication
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+ username = my_username
+ password = my_password
+
+```
+##### Detailed Configuration for a remote, secure host
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:https:netdata]
+ enabled = yes
+ username = my_username
+ password = my_password
+ destination = 10.10.1.114:2003
+ # data source = average
+ # prefix = netdata
+ # hostname = my_hostname
+ # update every = 10
+ # buffer on failures = 10
+ # timeout ms = 20000
+ # send names instead of ids = yes
+ # send charts matching = *
+ # send hosts matching = localhost *
+
+```
+
diff --git a/exporting/graphite/integrations/kairosdb.md b/exporting/graphite/integrations/kairosdb.md
new file mode 100644
index 000000000..605cc8289
--- /dev/null
+++ b/exporting/graphite/integrations/kairosdb.md
@@ -0,0 +1,172 @@
+<!--startmeta
+custom_edit_url: "https://github.com/netdata/netdata/edit/master/exporting/graphite/integrations/kairosdb.md"
+meta_yaml: "https://github.com/netdata/netdata/edit/master/exporting/graphite/metadata.yaml"
+sidebar_label: "KairosDB"
+learn_status: "Published"
+learn_rel_path: "Exporting"
+message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE EXPORTER'S metadata.yaml FILE"
+endmeta-->
+
+# KairosDB
+
+
+<img src="https://netdata.cloud/img/kairos.png" width="150"/>
+
+
+Use the Graphite connector for the exporting engine to archive your Netdata metrics to Graphite providers for long-term storage,
+further analysis, or correlation with data from other sources.
+
+
+
+<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" />
+
+## Setup
+
+### Prerequisites
+
+####
+
+- You have already installed Netdata and Graphite.
+
+
+
+### Configuration
+
+#### File
+
+The configuration file name for this integration is `exporting.conf`.
+
+
+You can edit the configuration file using the `edit-config` script from the
+Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory).
+
+```bash
+cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
+sudo ./edit-config exporting.conf
+```
+#### Options
+
+The following options can be defined for this exporter.
+
+<details><summary>Config options</summary>
+
+| Name | Description | Default | Required |
+|:----|:-----------|:-------|:--------:|
+| enabled | Enables or disables an exporting connector instance (yes/no). | no | True |
+| destination | Accepts a space separated list of hostnames, IPs (IPv4 and IPv6) and ports to connect to. Netdata will use the first available to send the metrics. | no | True |
+| username | Username for HTTP authentication | my_username | False |
+| password | Password for HTTP authentication | my_password | False |
+| data source | Selects the kind of data that will be sent to the external database. (as collected/average/sum) | | False |
+| hostname | The hostname to be used for sending data to the external database server. | [global].hostname | False |
+| prefix | The prefix to add to all metrics. | netdata | False |
+| update every | Frequency of sending sending data to the external database, in seconds. | 10 | False |
+| buffer on failures | The number of iterations (`update every` seconds) to buffer data, when the external database server is not available. | 10 | False |
+| timeout ms | The timeout in milliseconds to wait for the external database server to process the data. | 20000 | False |
+| send hosts matching | Hosts filter. Determines which hosts will be sent to the external database. The syntax is [simple patterns](https://github.com/netdata/netdata/tree/master/libnetdata/simple_pattern#simple-patterns). | localhost * | False |
+| send charts matching | One or more space separated patterns (use * as wildcard) checked against both chart id and chart name. | * | False |
+| send names instead of ids | Controls the metric names Netdata should send to the external database (yes/no). | | False |
+| send configured labels | Controls if host labels defined in the `[host labels]` section in `netdata.conf` should be sent to the external database (yes/no). | | False |
+| send automatic labels | Controls if automatically created labels, like `_os_name` or `_architecture` should be sent to the external database (yes/no). | | False |
+
+##### destination
+
+The format of each item in this list, is: [PROTOCOL:]IP[:PORT].
+- PROTOCOL can be udp or tcp. tcp is the default and only supported by the current exporting engine.
+- IP can be XX.XX.XX.XX (IPv4), or [XX:XX...XX:XX] (IPv6). For IPv6 you can to enclose the IP in [] to separate it from the port.
+- PORT can be a number of a service name. If omitted, the default port for the exporting connector will be used.
+
+Example IPv4:
+ ```yaml
+ destination = 10.11.14.2:2003 10.11.14.3:4242 10.11.14.4:2003
+ ```
+Example IPv6 and IPv4 together:
+```yaml
+destination = [ffff:...:0001]:2003 10.11.12.1:2003
+```
+When multiple servers are defined, Netdata will try the next one when the previous one fails.
+
+
+##### update every
+
+Netdata will add some randomness to this number, to prevent stressing the external server when many Netdata servers
+send data to the same database. This randomness does not affect the quality of the data, only the time they are sent.
+
+
+##### buffer on failures
+
+If the server fails to receive the data after that many failures, data loss on the connector instance is expected (Netdata will also log it).
+
+
+##### send hosts matching
+
+Includes one or more space separated patterns, using * as wildcard (any number of times within each pattern).
+The patterns are checked against the hostname (the localhost is always checked as localhost), allowing us to
+filter which hosts will be sent to the external database when this Netdata is a central Netdata aggregating multiple hosts.
+
+A pattern starting with `!` gives a negative match. So to match all hosts named `*db*` except hosts containing `*child*`,
+use `!*child* *db*` (so, the order is important: the first pattern matching the hostname will be used - positive or negative).
+
+
+##### send charts matching
+
+A pattern starting with ! gives a negative match. So to match all charts named apps.* except charts ending in *reads,
+use !*reads apps.* (so, the order is important: the first pattern matching the chart id or the chart name will be used,
+positive or negative). There is also a URL parameter filter that can be used while querying allmetrics. The URL parameter
+has a higher priority than the configuration option.
+
+
+##### send names instead of ids
+
+Netdata supports names and IDs for charts and dimensions. Usually IDs are unique identifiers as read by the system and names
+are human friendly labels (also unique). Most charts and metrics have the same ID and name, but in several cases they are
+different : disks with device-mapper, interrupts, QoS classes, statsd synthetic charts, etc.
+
+
+</details>
+
+#### Examples
+
+##### Example configuration
+
+Basic configuration
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+
+```
+##### Configuration with HTTPS and HTTP authentication
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:netdata]
+ enabled = yes
+ destination = localhost:2003
+ username = my_username
+ password = my_password
+
+```
+##### Detailed Configuration for a remote, secure host
+
+Add `:https` modifier to the connector type if you need to use the TLS/SSL protocol. For example: `remote_write:https:my_instance`.
+
+```yaml
+[graphite:https:netdata]
+ enabled = yes
+ username = my_username
+ password = my_password
+ destination = 10.10.1.114:2003
+ # data source = average
+ # prefix = netdata
+ # hostname = my_hostname
+ # update every = 10
+ # buffer on failures = 10
+ # timeout ms = 20000
+ # send names instead of ids = yes
+ # send charts matching = *
+ # send hosts matching = localhost *
+
+```
+