diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2021-02-07 11:45:55 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2021-02-07 11:45:55 +0000 |
| commit | a8220ab2d293bb7f4b014b79d16b2fb05090fa93 (patch) | |
| tree | 77f0a30f016c0925cf7ee9292e644bba183c2774 /health/REFERENCE.md | |
| parent | Adding upstream version 1.19.0. (diff) | |
| download | netdata-a8220ab2d293bb7f4b014b79d16b2fb05090fa93.tar.xz netdata-a8220ab2d293bb7f4b014b79d16b2fb05090fa93.zip | |
Adding upstream version 1.29.0.upstream/1.29.0
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'health/REFERENCE.md')
| -rw-r--r-- | health/REFERENCE.md | 797 |
1 files changed, 797 insertions, 0 deletions
diff --git a/health/REFERENCE.md b/health/REFERENCE.md new file mode 100644 index 00000000..bc5f40cc --- /dev/null +++ b/health/REFERENCE.md @@ -0,0 +1,797 @@ +<!-- +title: "Health configuration reference" +custom_edit_url: https://github.com/netdata/netdata/edit/master/health/REFERENCE.md +--> + +# Health configuration reference + +Welcome to the health configuration reference. + +This guide contains information about editing health configuration files to tweak existing alarms or create new health +entities that are customized to the needs of your infrastructure. + +To learn the basics of locating and editing health configuration files, see the [health +quickstart](/health/QUICKSTART.md). + +## Health configuration files + +You can configure the Agent's health watchdog service by editing files in two locations: + +- The `[health]` section in `netdata.conf`. By editing the daemon's behavior, you can disable health monitoring + altogether, run health checks more or less often, and more. See [daemon + configuration](/daemon/config/README.md#health-section-options) for a table of all the available settings, their + default values, and what they control. +- The individual `.conf` files in `health.d/`. These health entity files are organized by the type of metric they are + performing calculations on or their associated collector. You should edit these files using the `edit-config` + script. For example: `sudo ./edit-config health.d/cpu.conf`. + +## Health entity reference + +The following reference contains information about the syntax and options of _health entities_, which Netdata attaches +to charts in order to trigger alarms. + +### Entity types + +There are two entity types: **alarms** and **templates**. They have the same format and feature set—the only difference +is their label. + +**Alarms** are attached to specific charts and use the `alarm` label. + +**Templates** define rules that apply to all charts of a specific context, and use the `template` label. Templates help +you apply one entity to all disks, all network interfaces, all MySQL databases, and so on. + +Alarms have higher precedence and will override templates. If an alarm and template entity have the same name and attach +to the same chart, Netdata will use the alarm. + +### Entity format + +Netdata parses the following lines. Beneath the table is an in-depth explanation of each line's purpose and syntax. + +- The `on` and `lookup` lines are **always required**. +- Each entity **must** have one of the following lines: `calc`, `warn`, or `crit`. +- The `alarm` or `template` line must be the first line of any entity. +- A few lines use space-separated lists to define how the entity behaves. You can use `*` as a wildcard or prefix with + `!` for a negative match. Order is important, too! See our [simple patterns docs](../libnetdata/simple_pattern/) for + more examples. + +| line | required | functionality | +| --------------------------------------------------- | --------------- | ------------------------------------------------------------------------------------- | +| [`alarm`/`template`](#alarm-line-alarm-or-template) | yes | Name of the alarm/template. | +| [`on`](#alarm-line-on) | yes | The chart this alarm should attach to. | +| [`os`](#alarm-line-os) | no | Which operating systems to run this chart. | +| [`hosts`](#alarm-line-hosts) | no | Which hostnames will run this alarm. | +| [`plugin`](#alarm-line-plugin) | no | Restrict an alarm or template to only a certain plugin. | +| [`module`](#alarm-line-module) | no | Restrict an alarm or template to only a certain module. | +| [`families`](#alarm-line-families) | no | Restrict a template to only certain families. | +| [`lookup`](#alarm-line-lookup) | yes | The database lookup to find and process metrics for the chart specified through `on`. | +| [`calc`](#alarm-line-calc) | yes (see above) | A calculation to apply to the value found via `lookup` or another variable. | +| [`every`](#alarm-line-every) | no | The frequency of the alarm. | +| [`green`/`red`](#alarm-lines-green-and-red) | no | Set the green and red thresholds of a chart. | +| [`warn`/`crit`](#alarm-lines-warn-and-crit) | yes (see above) | Expressions evaluating to true or false, and when true, will trigger the alarm. | +| [`to`](#alarm-line-to) | no | A list of roles to send notifications to. | +| [`exec`](#alarm-line-exec) | no | The script to execute when the alarm changes status. | +| [`delay`](#alarm-line-delay) | no | Optional hysteresis settings to prevent floods of notifications. | +| [`repeat`](#alarm-line-repeat) | no | The interval for sending notifications when an alarm is in WARNING or CRITICAL mode. | +| [`option`](#alarm-line-option) | no | Add an option to not clear alarms. | +| [`host labels`](#alarm-line-host-labels) | no | List of labels present on a host. | + +The `alarm` or `template` line must be the first line of any entity. + +#### Alarm line `alarm` or `template` + +This line starts an alarm or template based on the [entity type](#entity-types) you're interested in creating. + +**Alarm:** + +```yaml +alarm: NAME +``` + +**Template:** + +```yaml +template: NAME +``` + +`NAME` can be any alpha character, with `.` (period) and `_` (underscore) as the only allowed symbols, but the names +cannot be `chart name`, `dimension name`, `family name`, or `chart variables names`. + +#### Alarm line `on` + +This line defines the chart this alarm should attach to. + +**Alarms:** + +```yaml +on: CHART +``` + +The value `CHART` should be the unique ID or name of the chart you're interested in, as shown on the dashboard. In the +image below, the unique ID is `system.cpu`. + + + +**Template:** + +```yaml +on: CONTEXT +``` + +The value `CONTEXT` should be the context you want this template to attach to. + +Need to find the context? Hover over the date on any given chart and look at the tooltip. In the image below, which +shows a disk I/O chart, the tooltip reads: `proc:/proc/diskstats, disk.io`. + + + +You're interested in what comes after the comma: `disk.io`. That's the name of the chart's context. + +If you create a template using the `disk.io` context, it will apply an alarm to every disk available on your system. + +#### Alarm line `os` + +The alarm or template will be used only if the operating system of the host matches this list specified in `os`. The +value is a space-separated list. + +The following example enables the entity on Linux, FreeBSD, and macOS, but no other operating systems. + +```yaml +os: linux freebsd macos +``` + +#### Alarm line `hosts` + +The alarm or template will be used only if the hostname of the host matches this space-separated list. + +The following example will load on systems with the hostnames `server` and `server2`, and any system with hostnames that +begin with `database`. It _will not load_ on the host `redis3`, but will load on any _other_ systems with hostnames that +begin with `redis`. + +```yaml +hosts: server1 server2 database* !redis3 redis* +``` + +#### Alarm line `plugin` + +The `plugin` line filters which plugin within the context this alarm should apply to. The value is a space-separated +list of [simple patterns](/libnetdata/simple_pattern/README.md). For example, +you can create a filter for an alarm that applies specifically to `python.d.plugin`: + +```yaml +plugin: python.d.plugin +``` + +The `plugin` line is best used with other options like `module`. When used alone, the `plugin` line creates a very +inclusive filter that is unlikely to be of much use in production. See [`module`](#alarm-line-module) for a +comprehensive example using both. + +#### Alarm line `module` + +The `module` line filters which module within the context this alarm should apply to. The value is a space-separated +list of [simple patterns](/libnetdata/simple_pattern/README.md). For +example, you can create an alarm that applies only on the `isc_dhcpd` module started by `python.d.plugin`: + +```yaml +plugin: python.d.plugin +module: isc_dhcpd +``` + +#### Alarm line `families` + +The `families` line, used only alongside templates, filters which families within the context this alarm should apply +to. The value is a space-separated list. + +The value is a space-separate list of simple patterns. See our [simple patterns docs](../libnetdata/simple_pattern/) for +some examples. + +For example, you can create a template on the `disk.io` context, but filter it to only the `sda` and `sdb` families: + +```yaml +families: sda sdb +``` + +#### Alarm line `lookup` + +This line makes a database lookup to find a value. This result of this lookup is available as `$this`. + +The format is: + +```yaml +lookup: METHOD AFTER [at BEFORE] [every DURATION] [OPTIONS] [of DIMENSIONS] [foreach DIMENSIONS] +``` + +Everything is the same with [badges](../web/api/badges/). In short: + +- `METHOD` is one of `average`, `min`, `max`, `sum`, `incremental-sum`. + This is required. + +- `AFTER` is a relative number of seconds, but it also accepts a single letter for changing + the units, like `-1s` = 1 second in the past, `-1m` = 1 minute in the past, `-1h` = 1 hour + in the past, `-1d` = 1 day in the past. You need a negative number (i.e. how far in the past + to look for the value). **This is required**. + +- `at BEFORE` is by default 0 and is not required. Using this you can define the end of the + lookup. So data will be evaluated between `AFTER` and `BEFORE`. + +- `every DURATION` sets the updated frequency of the lookup (supports single letter units as + above too). + +- `OPTIONS` is a space separated list of `percentage`, `absolute`, `min2max`, `unaligned`, + `match-ids`, `match-names`. Check the badges documentation for more info. + +- `of DIMENSIONS` is optional and has to be the last parameter. Dimensions have to be separated + by `,` or `|`. The space characters found in dimensions will be kept as-is (a few dimensions + have spaces in their names). This accepts Netdata simple patterns _(with `words` separated by + `,` or `|` instead of spaces)_ and the `match-ids` and `match-names` options affect the searches + for dimensions. + +- `foreach DIMENSIONS` is optional, will always be the last parameter, and uses the same `,`/`|` + rules as the `of` parameter. Each dimension you specify in `foreach` will use the same rule + to trigger an alarm. If you set both `of` and `foreach`, Netdata will ignore the `of` parameter + and replace it with one of the dimensions you gave to `foreach`. + +The result of the lookup will be available as `$this` and `$NAME` in expressions. +The timestamps of the timeframe evaluated by the database lookup is available as variables +`$after` and `$before` (both are unix timestamps). + +#### Alarm line `calc` + +A `calc` is designed to apply some calculation to the values or variables available to the entity. The result of the +calculation will be made available at the `$this` variable, overwriting the value from your `lookup`, to use in warning +and critical expressions. + +When paired with `lookup`, `calc` will perform the calculation just after `lookup` has retrieved a value from Netdata's +database. + +You can use `calc` without `lookup` if you are using [other available variables](#variables). + +The `calc` line uses [expressions](#expressions) for its syntax. + +```yaml +calc: EXPRESSION +``` + +#### Alarm line `every` + +Sets the update frequency of this alarm. This is the same to the `every DURATION` given +in the `lookup` lines. + +Format: + +```yaml +every: DURATION +``` + +`DURATION` accepts `s` for seconds, `m` is minutes, `h` for hours, `d` for days. + +#### Alarm lines `green` and `red` + +Set the green and red thresholds of a chart. Both are available as `$green` and `$red` in expressions. If multiple +alarms define different thresholds, the ones defined by the first alarm will be used. These will eventually visualized +on the dashboard, so only one set of them is allowed. If you need multiple sets of them in different alarms, use +absolute numbers instead of `$red` and `$green`. + +Format: + +```yaml +green: NUMBER +red: NUMBER +``` + +#### Alarm lines `warn` and `crit` + +Define the expression that triggers either a warning or critical alarm. These are optional, and should evaluate to +either true or false (or zero/non-zero). + +The format uses Netdata's [expressions syntax](#expressions). + +```yaml +warn: EXPRESSION +crit: EXPRESSION +``` + +#### Alarm line `to` + +This will be the first parameter of the script to be executed when the alarm switches status. Its meaning is left up to +the `exec` script. + +The default `exec` script, `alarm-notify.sh`, uses this field as a space separated list of roles, which are then +consulted to find the exact recipients per notification method. + +Format: + +```yaml +to: ROLE1 ROLE2 ROLE3 ... +``` + +#### Alarm line `exec` + +The script that will be executed when the alarm changes status. + +Format: + +```yaml +exec: SCRIPT +``` + +The default `SCRIPT` is Netdata's `alarm-notify.sh`, which supports all the notifications methods Netdata supports, +including custom hooks. + +#### Alarm line `delay` + +This is used to provide optional hysteresis settings for the notifications, to defend against notification floods. These +settings do not affect the actual alarm - only the time the `exec` script is executed. + +Format: + +```yaml +delay: [[[up U] [down D] multiplier M] max X] +``` + +- `up U` defines the delay to be applied to a notification for an alarm that raised its status + (i.e. CLEAR to WARNING, CLEAR to CRITICAL, WARNING to CRITICAL). For example, `up 10s`, the + notification for this event will be sent 10 seconds after the actual event. This is used in + hope the alarm will get back to its previous state within the duration given. The default `U` + is zero. + +- `down D` defines the delay to be applied to a notification for an alarm that moves to lower + state (i.e. CRITICAL to WARNING, CRITICAL to CLEAR, WARNING to CLEAR). For example, `down 1m` + will delay the notification by 1 minute. This is used to prevent notifications for flapping + alarms. The default `D` is zero. + +- `multiplier M` multiplies `U` and `D` when an alarm changes state, while a notification is + delayed. The default multiplier is `1.0`. + +- `max X` defines the maximum absolute notification delay an alarm may get. The default `X` + is `max(U * M, D * M)` (i.e. the max duration of `U` or `D` multiplied once with `M`). + + Example: + + `delay: up 10s down 15m multiplier 2 max 1h` + + The time is `00:00:00` and the status of the alarm is CLEAR. + + | time of event | new status | delay | notification will be sent | why | + | ------------- | ---------- | --- | ------------------------- | --- | + | 00:00:01 | WARNING | `up 10s` | 00:00:11 | first state switch | + | 00:00:05 | CLEAR | `down 15m x2` | 00:30:05 | the alarm changes state while a notification is delayed, so it was multiplied | + | 00:00:06 | WARNING | `up 10s x2 x2` | 00:00:26 | multiplied twice | + | 00:00:07 | CLEAR | `down 15m x2 x2 x2` | 00:45:07 | multiplied 3 times. | + + So: + + - `U` and `D` are multiplied by `M` every time the alarm changes state (any state, not just + their matching one) and a delay is in place. + - All are reset to their defaults when the alarm switches state without a delay in place. + +#### Alarm line `repeat` + +Defines the interval between repeating notifications for the alarms in CRITICAL or WARNING mode. This will override the +default interval settings inherited from health settings in `netdata.conf`. The default settings for repeating +notifications are `default repeat warning = DURATION` and `default repeat critical = DURATION` which can be found in +health stock configuration, when one of these interval is bigger than 0, Netdata will activate the repeat notification +for `CRITICAL`, `CLEAR` and `WARNING` messages. + +Format: + +```yaml +repeat: [off] [warning DURATION] [critical DURATION] +``` + +- `off`: Turns off the repeating feature for the current alarm. This is effective when the default repeat settings has + been enabled in health configuration. +- `warning DURATION`: Defines the interval when the alarm is in WARNING state. Use `0s` to turn off the repeating + notification for WARNING mode. +- `critical DURATION`: Defines the interval when the alarm is in CRITICAL state. Use `0s` to turn off the repeating + notification for CRITICAL mode. + +#### Alarm line `option` + +The only possible value for the `option` line is + +```yaml +option: no-clear-notification +``` + +For some alarms we need compare two time-frames, to detect anomalies. For example, `health.d/httpcheck.conf` has an +alarm template called `web_service_slow` that compares the average http call response time over the last 3 minutes, +compared to the average over the last hour. It triggers a warning alarm when the average of the last 3 minutes is twice +the average of the last hour. In such cases, it is easy to trigger the alarm, but difficult to tell when the alarm is +cleared. As time passes, the newest window moves into the older, so the average response time of the last hour will keep +increasing. Eventually, the comparison will find the averages in the two time-frames close enough to clear the alarm. +However, the issue was not resolved, it's just a matter of the newer data "polluting" the old. For such alarms, it's a +good idea to tell Netdata to not clear the notification, by using the `no-clear-notification` option. + +#### Alarm line `host labels` + +Defines the list of labels present on a host. See our [host labels guide](/docs/guides/using-host-labels.md) for +an explanation of host labels and how to implement them. + +For example, let's suppose that `netdata.conf` is configured with the following labels: + +```yaml +[host labels] + installed = 20191211 + room = server +``` + +And more labels in `netdata.conf` for workstations: + +```yaml +[host labels] + installed = 201705 + room = workstation +``` + +By defining labels inside of `netdata.conf`, you can now apply labels to alarms. For example, you can add the following +line to any alarms you'd like to apply to hosts that have the label `room = server`. + +```yaml +host labels: room = server +``` + +The `host labels` is a space-separated list that accepts simple patterns. For example, you can create an alarm +that will be applied to all hosts installed in the last decade with the following line: + +```yaml +host labels: installed = 201* +``` + +See our [simple patterns docs](../libnetdata/simple_pattern/) for more examples. + +## Expressions + +Netdata has an internal [infix expression parser](../libnetdata/eval). This parses expressions and creates an internal +structure that allows fast execution of them. + +These operators are supported `+`, `-`, `*`, `/`, `<`, `<=`, `<>`, `!=`, `>`, `>=`, `&&`, `||`, `!`, `AND`, `OR`, `NOT`. +Boolean operators result in either `1` (true) or `0` (false). + +The conditional evaluation operator `?` is supported too. Using this operator IF-THEN-ELSE conditional statements can be +specified. The format is: `(condition) ? (true expression) : (false expression)`. So, Netdata will first evaluate the +`condition` and based on the result will either evaluate `true expression` or `false expression`. + +Example: `($this > 0) ? ($avail * 2) : ($used / 2)`. + +Nested such expressions are also supported (i.e. `true expression` and `false expression` can contain conditional +evaluations). + +Expressions also support the `abs()` function. + +Expressions can have variables. Variables start with `$`. Check below for more information. + +There are two special values you can use: + +- `nan`, for example `$this != nan` will check if the variable `this` is available. A variable can be `nan` if the + database lookup failed. All calculations (i.e. addition, multiplication, etc) with a `nan` result in a `nan`. + +- `inf`, for example `$this != inf` will check if `this` is not infinite. A value or variable can be set to infinite + if divided by zero. All calculations (i.e. addition, multiplication, etc) with a `inf` result in a `inf`. + +### Special use of the conditional operator + +A common (but not necessarily obvious) use of the conditional evaluation operator is to provide +[hysteresis](https://en.wikipedia.org/wiki/Hysteresis) around the critical or warning thresholds. This usage helps to +avoid bogus messages resulting from small variations in the value when it is varying regularly but staying close to the +threshold value, without needing to delay sending messages at all. + +An example of such usage from the default CPU usage alarms bundled with Netdata is: + +```yaml +warn: $this > (($status >= $WARNING) ? (75) : (85)) +crit: $this > (($status == $CRITICAL) ? (85) : (95)) +``` + +The above say: + +- If the alarm is currently a warning, then the threshold for being considered a warning is 75, otherwise it's 85. + +- If the alarm is currently critical, then the threshold for being considered critical is 85, otherwise it's 95. + +Which in turn, results in the following behavior: + +- While the value is rising, it will trigger a warning when it exceeds 85, and a critical alert when it exceeds 95. + +- While the value is falling, it will return to a warning state when it goes below 85, and a normal state when it goes + below 75. + +- If the value is constantly varying between 80 and 90, then it will trigger a warning the first time it goes above + 85, but will remain a warning until it goes below 75 (or goes above 85). + +- If the value is constantly varying between 90 and 100, then it will trigger a critical alert the first time it goes + above 95, but will remain a critical alert goes below 85 (at which point it will return to being a warning). + +## Variables + +You can find all the variables that can be used for a given chart, using +`http://NODE:19999/api/v1/alarm_variables?chart=CHART_NAME`, replacing `NODE` with the IP address or hostname for your +Agent dashboard. For example, [variables for the `system.cpu` chart of the +registry](https://registry.my-netdata.io/api/v1/alarm_variables?chart=system.cpu). + +> If you don't know how to find the CHART_NAME, you can read about it [here](../web/README.md#charts). + +Netdata supports 3 internal indexes for variables that will be used in health monitoring. + +<details markdown="1"><summary>The variables below can be used in both chart alarms and context templates.</summary> + +Although the `alarm_variables` link shows you variables for a particular chart, the same variables can also be used in +templates for charts belonging to a given [context](../web/README.md#contexts). The reason is that all charts of a given +context are essentially identical, with the only difference being the [family](../web/README.md#families) that +identifies a particular hardware or software instance. Charts and templates do not apply to specific families anyway, +unless if you explicitly limit an alarm with the [alarm line `families`](#alarm-line-families). + +</details> + +- **chart local variables**. All the dimensions of the chart are exposed as local variables. The value of `$this` for + the other configured alarms of the chart also appears, under the name of each configured alarm. + + Charts also define a few special variables: + + - `$last_collected_t` is the unix timestamp of the last data collection + - `$collected_total_raw` is the sum of all the dimensions (their last collected values) + - `$update_every` is the update frequency of the chart + - `$green` and `$red` the threshold defined in alarms (these are per chart - the charts + inherits them from the the first alarm that defined them) + + Chart dimensions define their last calculated (i.e. interpolated) value, exactly as + shown on the charts, but also a variable with their name and suffix `_raw` that resolves + to the last collected value - as collected and another with suffix `_last_collected_t` + that resolves to unix timestamp the dimension was last collected (there may be dimensions + that fail to be collected while others continue normally). + +- **family variables**. Families are used to group charts together. For example all `eth0` + charts, have `family = eth0`. This index includes all local variables, but if there are + overlapping variables, only the first are exposed. + +- **host variables**. All the dimensions of all charts, including all alarms, in fullname. + Fullname is `CHART.VARIABLE`, where `CHART` is either the chart id or the chart name (both + are supported). + +- **special variables\*** are: + + - `$this`, which is resolved to the value of the current alarm. + + - `$status`, which is resolved to the current status of the alarm (the current = the last + status, i.e. before the current database lookup and the evaluation of the `calc` line). + This values can be compared with `$REMOVED`, `$UNINITIALIZED`, `$UNDEFINED`, `$CLEAR`, + `$WARNING`, `$CRITICAL`. These values are incremental, ie. `$status > $CLEAR` works as + expected. + + - `$now`, which is resolved to current unix timestamp. + +## Alarm statuses + +Alarms can have the following statuses: + +- `REMOVED` - the alarm has been deleted (this happens when a SIGUSR2 is sent to Netdata + to reload health configuration) + +- `UNINITIALIZED` - the alarm is not initialized yet + +- `UNDEFINED` - the alarm failed to be calculated (i.e. the database lookup failed, + a division by zero occurred, etc) + +- `CLEAR` - the alarm is not armed / raised (i.e. is OK) + +- `WARNING` - the warning expression resulted in true or non-zero + +- `CRITICAL` - the critical expression resulted in true or non-zero + +The external script will be called for all status changes. + +## Example alarms + +Check the `health/health.d/` directory for all alarms shipped with Netdata. + +Here are a few examples: + +### Example 1 + +A simple check if an apache server is alive: + +```yaml +template: apache_last_collected_secs + on: apache.requests + calc: $now - $last_collected_t + every: 10s + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) +``` + +The above checks that Netdata is able to collect data from apache. In detail: + +```yaml +template: apache_last_collected_secs +``` + +The above defines a **template** named `apache_last_collected_secs`. +The name is important since `$apache_last_collected_secs` resolves to the `calc` line. +So, try to give something descriptive. + +```yaml + on: apache.requests +``` + +The above applies the **template** to all charts that have `context = apache.requests` +(i.e. all your apache servers). + +```yaml + calc: $now - $last_collected_t +``` + +- `$now` is a standard variable that resolves to the current timestamp. + +- `$last_collected_t` is the last data collection timestamp of the chart. + So this calculation gives the number of seconds passed since the last data collection. + +```yaml + every: 10s +``` + +The alarm will be evaluated every 10 seconds. + +```yaml + warn: $this > ( 5 * $update_every) + crit: $this > (10 * $update_every) +``` + +If these result in non-zero or true, they trigger the alarm. + +- `$this` refers to the value of this alarm (i.e. the result of the `calc` line. + We could also use `$apache_last_collected_secs`. + +`$update_every` is the update frequency of the chart, in seconds. + +So, the warning condition checks if we have not collected data from apache for 5 +iterations and the critical condition checks for 10 iterations. + +### Example 2 + +Check if any of the disks is critically low on disk space: + +```yaml +template: disk_full_percent + on: disk.space + calc: $used * 100 / ($avail + $used) + every: 1m + warn: $this > 80 + crit: $this > 95 + repeat: warning 120s critical 10s +``` + +`$used` and `$avail` are the `used` and `avail` chart dimensions as shown on the dashboard. + +So, the `calc` line finds the percentage of used space. `$this` resolves to this percentage. + +This is a repeating alarm and if the alarm becomes CRITICAL it repeats the notifications every 10 seconds. It also +repeats notifications every 2 minutes if the alarm goes into WARNING mode. + +### Example 3 + +Predict if any disk will run out of space in the near future. + +We do this in 2 steps: + +Calculate the disk fill rate: + +```yaml + template: disk_fill_rate + on: disk.space + lookup: max -1s at -30m unaligned of avail + calc: ($this - $avail) / (30 * 60) + every: 15s +``` + +In the `calc` line: `$this` is the result of the `lookup` line (i.e. the free space 30 minutes +ago) and `$avail` is the current disk free space. So the `calc` line will either have a positive +number of GB/second if the disk if filling up, or a negative number of GB/second if the disk is +freeing up space. + +There is no `warn` or `crit` lines here. So, this template will just do the calculation and +nothing more. + +Predict the hours after which the disk will run out of space: + +```yaml + template: disk_full_after_hours + on: disk.space + calc: $avail / $disk_fill_rate / 3600 + every: 10s + warn: $this > 0 and $this < 48 + crit: $this > 0 and $this < 24 +``` + +The `calc` line estimates the time in hours, we will run out of disk space. Of course, only +positive values are interesting for this check, so the warning and critical conditions check +for positive values and that we have enough free space for 48 and 24 hours respectively. + +Once this alarm triggers we will receive an email like this: + + + +### Example 4 + +Check if any network interface is dropping packets: + +```yaml +template: 30min_packet_drops + on: net.drops + lookup: sum -30m unaligned absolute + every: 10s + crit: $this > 0 +``` + +The `lookup` line will calculate the sum of the all dropped packets in the last 30 minutes. + +The `crit` line will issue a critical alarm if even a single packet has been dropped. + +Note that the drops chart does not exist if a network interface has never dropped a single packet. +When Netdata detects a dropped packet, it will add the chart and it will automatically attach this +alarm to it. + +### Example 5 + +Check if user or system dimension is using more than 50% of cpu: + +```yaml + alarm: dim_template + on: system.cpu + os: linux +lookup: average -3s percentage foreach system,user + units: % + every: 10s + warn: $this > 50 + crit: $this > 80 +``` + +The `lookup` line will calculate the average CPU usage from system and user in the last 3 seconds. Because we have +the foreach in the `lookup` line, Netdata will create two independent alarms called `dim_template_system` +and `dim_template_user` that will have all the other parameters shared among them. + +### Example 6 + +Check if all dimensions are using more than 50% of cpu: + +```yaml + alarm: dim_template + on: system.cpu + os: linux +lookup: average -3s percentage foreach * + units: % + every: 10s + warn: $this > 50 + crit: $this > 80 +``` + +The `lookup` line will calculate the average of CPU usage from system and user in the last 3 seconds. In this case +Netdata will create alarms for all dimensions of the chart. + +## Troubleshooting + +You can compile Netdata with [debugging](/daemon/README.md#debugging) and then set in `netdata.conf`: + +```yaml +[global] + debug flags = 0x0000000000800000 +``` + +Then check your `/var/log/netdata/debug.log`. It will show you how it works. Important: this will generate a lot of +output in debug.log. + +You can find the context of charts by looking up the chart in either `http://NODE:19999/netdata.conf` or +`http://NODE:19999/api/v1/charts`, replacing `NODE` with the IP address or hostname for your Agent dashboard. + +You can find how Netdata interpreted the expressions by examining the alarm at +`http://NODE:19999/api/v1/alarms?all`. For each expression, Netdata will return the expression as given in its +config file, and the same expression with additional parentheses added to indicate the evaluation flow of the +expression. + +## Disabling health checks or silencing notifications at runtime + +It's currently not possible to schedule notifications from within the alarm template. For those scenarios where you need +to temporary disable notifications (for instance when running backups triggers a disk alert) you can disable or silence +notifications are runtime. The health checks can be controlled at runtime via the [health management +api](/web/api/health/README.md). + +[](<>) |