summaryrefslogtreecommitdiffstats
path: root/health/notifications/syslog/README.md
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2023-10-17 09:30:20 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2023-10-17 09:30:20 +0000
commit386ccdd61e8256c8b21ee27ee2fc12438fc5ca98 (patch)
treec9fbcacdb01f029f46133a5ba7ecd610c2bcb041 /health/notifications/syslog/README.md
parentAdding upstream version 1.42.4. (diff)
downloadnetdata-386ccdd61e8256c8b21ee27ee2fc12438fc5ca98.tar.xz
netdata-386ccdd61e8256c8b21ee27ee2fc12438fc5ca98.zip
Adding upstream version 1.43.0.upstream/1.43.0
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'health/notifications/syslog/README.md')
-rw-r--r--health/notifications/syslog/README.md131
1 files changed, 93 insertions, 38 deletions
diff --git a/health/notifications/syslog/README.md b/health/notifications/syslog/README.md
index 4cda14b37..86d02deeb 100644
--- a/health/notifications/syslog/README.md
+++ b/health/notifications/syslog/README.md
@@ -1,56 +1,82 @@
-# Syslog Agent alert notifications
+<!--startmeta
+custom_edit_url: "https://github.com/netdata/netdata/edit/master/health/notifications/syslog/README.md"
+meta_yaml: "https://github.com/netdata/netdata/edit/master/health/notifications/syslog/metadata.yaml"
+sidebar_label: "syslog"
+learn_status: "Published"
+learn_rel_path: "Alerting/Notifications/Agent Dispatched Notifications"
+message: "DO NOT EDIT THIS FILE DIRECTLY, IT IS GENERATED BY THE NOTIFICATION'S metadata.yaml FILE"
+endmeta-->
-Learn how to send notifications to Syslog using Netdata's Agent alert notification feature, which supports dozens of endpoints, user roles, and more.
+# syslog
-> ### Note
->
-> This file assumes you have read the [Introduction to Agent alert notifications](https://github.com/netdata/netdata/blob/master/health/notifications/README.md), detailing how the Netdata Agent's alert notification method works.
-Logged messages will look like this:
+<img src="https://netdata.cloud/img/syslog.png" width="150"/>
+
+
+Send notifications to Syslog using Netdata's Agent alert notification feature, which supports dozens of endpoints, user roles, and more.
+
+
+
+<img src="https://img.shields.io/badge/maintained%20by-Netdata-%2300ab44" />
+
+## Setup
+
+### Prerequisites
+
+####
+
+- A working `logger` command for this to work. This is the case on pretty much every Linux system in existence, and most BSD systems.
+- Access to the terminal where Netdata Agent is running
+
+
+
+### Configuration
+
+#### File
+
+The configuration file name for this integration is `health_alarm_notify.conf`.
+
+
+You can edit the configuration file using the `edit-config` script from the
+Netdata [config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory).
```bash
-netdata WARNING on hostname at Tue Apr 3 09:00:00 EDT 2018: disk_space._ out of disk space time = 5h
+cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
+sudo ./edit-config health_alarm_notify.conf
```
+#### Options
-## Prerequisites
+The following options can be defined for this notification
-You will need:
+<details><summary>Config Options</summary>
-- A working `logger` command for this to work. This is the case on pretty much every Linux system in existence, and most BSD systems.
-- terminal access to the Agent you wish to configure
+| Name | Description | Default | Required |
+|:----|:-----------|:-------|:--------:|
+| SYSLOG_FACILITY | Set `SYSLOG_FACILITY` to the facility used for logging, by default this value is set to `local6`. | | True |
+| DEFAULT_RECIPIENT_SYSLOG | Set `DEFAULT_RECIPIENT_SYSLOG` to the recipient you want the alert notifications to be sent to. | | True |
+| SEND_SYSLOG | Set SEND_SYSLOG to YES, make sure you have everything else configured before turning this on. | | True |
-## Configure Netdata to send alert notifications to Syslog
+##### DEFAULT_RECIPIENT_SYSLOG
-> ### Info
->
-> This file mentions editing configuration files.
->
-> - To edit configuration files in a safe way, we provide the [`edit config` script](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#use-edit-config-to-edit-configuration-files) located in your [Netdata config directory](https://github.com/netdata/netdata/blob/master/docs/configure/nodes.md#the-netdata-config-directory) (typically is `/etc/netdata`) that creates the proper file and opens it in an editor automatically.
-> Note that to run the script you need to be inside your Netdata config directory.
->
-> It is recommended to use this way for configuring Netdata.
+Targets are defined as follows:
-Edit `health_alarm_notify.conf`, changes to this file do not require restarting Netdata:
+```
+[[facility.level][@host[:port]]/]prefix
+```
-1. Set `SYSLOG_FACILITY` to the facility used for logging, by default this value is set to `local6`.
-2. Set `DEFAULT_RECIPIENT_SYSLOG` to the recipient you want the alert notifications to be sent to.
- Targets are defined as follows:
+prefix defines what the log messages are prefixed with. By default, all lines are prefixed with 'netdata'.
- ```conf
- [[facility.level][@host[:port]]/]prefix
- ```
+The facility and level are the standard syslog facility and level options, for more info on them see your local logger and syslog documentation. By default, Netdata will log to the local6 facility, with a log level dependent on the type of message (crit for CRITICAL, warning for WARNING, and info for everything else).
- `prefix` defines what the log messages are prefixed with. By default, all lines are prefixed with 'netdata'.
+You can configure sending directly to remote log servers by specifying a host (and optionally a port). However, this has a somewhat high overhead, so it is much preferred to use your local syslog daemon to handle the forwarding of messages to remote systems (pretty much all of them allow at least simple forwarding, and most of the really popular ones support complex queueing and routing of messages to remote log servers).
- The `facility` and `level` are the standard syslog facility and level options, for more info on them see your local `logger` and `syslog` documentation. By default, Netdata will log to the `local6` facility, with a log level dependent on the type of message (`crit` for CRITICAL, `warning` for WARNING, and `info` for everything else).
+You can define multiple recipients like this: daemon.notice@loghost:514/netdata daemon.notice@loghost2:514/netdata.
+All roles will default to this variable if left unconfigured.
- You can configure sending directly to remote log servers by specifying a host (and optionally a port). However, this has a somewhat high overhead, so it is much preferred to use your local syslog daemon to handle the forwarding of messages to remote systems (pretty much all of them allow at least simple forwarding, and most of the really popular ones support complex queueing and routing of messages to remote log servers).
- You can define multiple recipients like this: `daemon.notice@loghost:514/netdata daemon.notice@loghost2:514/netdata`.
- All roles will default to this variable if left unconfigured.
-3. Lastly, set `SEND_SYSLOG` to `YES`, make sure you have everything else configured _before_ turning this on.
+##### SEND_SYSLOG
-You can then have different recipients per **role**, by editing `DEFAULT_RECIPIENT_SYSLOG` with the recipient you want, in the following entries at the bottom of the same file:
+You can then have different recipients per role, by editing DEFAULT_RECIPIENT_SYSLOG with the recipient you want, in the following entries at the bottom of the same file:
```conf
role_recipients_syslog[sysadmin]="daemon.notice@loghost1:514/netdata"
@@ -61,17 +87,46 @@ role_recipients_syslog[proxyadmin]="daemon.notice@loghost5:514/netdata"
role_recipients_syslog[sitemgr]="daemon.notice@loghost6:514/netdata"
```
-An example of a working configuration would be:
-```conf
+</details>
+
+#### Examples
+
+##### Basic Configuration
+
+
+
+```yaml
#------------------------------------------------------------------------------
# syslog notifications
SEND_SYSLOG="YES"
SYSLOG_FACILITY='local6'
DEFAULT_RECIPIENT_SYSLOG="daemon.notice@loghost6:514/netdata"
+
```
-## Test the notification method
-To test this alert notification method refer to the ["Testing Alert Notifications"](https://github.com/netdata/netdata/blob/master/health/notifications/README.md#testing-alert-notifications) section of the Agent alert notifications page.
+## Troubleshooting
+
+### Test Notification
+
+You can run the following command by hand, to test alerts configuration:
+
+```bash
+# become user netdata
+sudo su -s /bin/bash netdata
+
+# enable debugging info on the console
+export NETDATA_ALARM_NOTIFY_DEBUG=1
+
+# send test alarms to sysadmin
+/usr/libexec/netdata/plugins.d/alarm-notify.sh test
+
+# send test alarms to any role
+/usr/libexec/netdata/plugins.d/alarm-notify.sh test "ROLE"
+```
+
+Note that this will test _all_ alert mechanisms for the selected role.
+
+