Adding upstream version 1.14.0~rc0.upstream/1.14.0_rc0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 344 insertions, 3783 deletions

diff --git a/health/Makefile.am b/health/Makefile.am
index 86ad5969a..9b69b485b 100644
--- a/health/Makefile.am
+++ b/health/Makefile.am
@@ -46,6 +46,7 @@ dist_healthconfig_DATA = \
     health.d/ipfs.conf \
     health.d/ipmi.conf \
     health.d/isc_dhcpd.conf \
+    health.d/kubelet.conf \
     health.d/lighttpd.conf \
     health.d/linux_power_supply.conf \
     health.d/load.conf \
@@ -68,7 +69,6 @@ dist_healthconfig_DATA = \
     health.d/retroshare.conf \
     health.d/softnet.conf \
     health.d/squid.conf \
-    health.d/sslcheck.conf \
     health.d/stiebeleltron.conf \
     health.d/swap.conf \
     health.d/tcp_conn.conf \
@@ -79,5 +79,6 @@ dist_healthconfig_DATA = \
     health.d/udp_errors.conf \
     health.d/varnish.conf \
     health.d/web_log.conf \
+    health.d/x509check.conf \
     health.d/zfs.conf \
     $(NULL)
diff --git a/health/Makefile.in b/health/Makefile.in
deleted file mode 100644
index 903762f86..000000000
--- a/health/Makefile.in
+++ /dev/null
@@ -1,803 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = health
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(dist_healthconfig_DATA) $(dist_noinst_DATA) \
-	$(dist_userhealthconfig_DATA)
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
-	$(top_srcdir)/build/m4/ax_c__generic.m4 \
-	$(top_srcdir)/build/m4/ax_c_lto.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallopt.m4 \
-	$(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
-	$(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
-	$(top_srcdir)/build/m4/ax_pthread.m4 \
-	$(top_srcdir)/build/m4/jemalloc.m4 \
-	$(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
-	install-data-recursive install-dvi-recursive \
-	install-exec-recursive install-html-recursive \
-	install-info-recursive install-pdf-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(healthconfigdir)" \
-	"$(DESTDIR)$(userhealthconfigdir)"
-DATA = $(dist_healthconfig_DATA) $(dist_noinst_DATA) \
-	$(dist_userhealthconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
-  $(RECURSIVE_TARGETS) \
-  $(RECURSIVE_CLEAN_TARGETS) \
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	distdir
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CUPSCONFIG = @CUPSCONFIG@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
-IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
-LIBCAP_LIBS = @LIBCAP_LIBS@
-LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
-LIBMNL_LIBS = @LIBMNL_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MATH_CFLAGS = @MATH_CFLAGS@
-MATH_LIBS = @MATH_LIBS@
-MKDIR_P = @MKDIR_P@
-NFACCT_CFLAGS = @NFACCT_CFLAGS@
-NFACCT_LIBS = @NFACCT_LIBS@
-OBJEXT = @OBJEXT@
-OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
-OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
-OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
-OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
-OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
-OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
-OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@
-OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
-OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@
-OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
-OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@
-OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
-OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@
-OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SSE_CANDIDATE = @SSE_CANDIDATE@
-STRIP = @STRIP@
-UUID_CFLAGS = @UUID_CFLAGS@
-UUID_LIBS = @UUID_LIBS@
-VERSION = @VERSION@
-ZLIB_CFLAGS = @ZLIB_CFLAGS@
-ZLIB_LIBS = @ZLIB_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-ax_pthread_config = @ax_pthread_config@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_target = @build_target@
-build_vendor = @build_vendor@
-builddir = @builddir@
-cachedir = @cachedir@
-chartsdir = @chartsdir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-has_jemalloc = @has_jemalloc@
-has_tcmalloc = @has_tcmalloc@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libconfigdir = @libconfigdir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-logdir = @logdir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-nodedir = @nodedir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pluginsdir = @pluginsdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pythondir = @pythondir@
-registrydir = @registrydir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-varlibdir = @varlibdir@
-webdir = @webdir@
-AUTOMAKE_OPTIONS = subdir-objects
-MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-SUBDIRS = \
-    notifications \
-    $(NULL)
-
-CLEANFILES = \
-	$(NULL)
-
-dist_noinst_DATA = \
-	README.md \
-	$(NULL)
-
-userhealthconfigdir = $(configdir)/health.d
-dist_userhealthconfig_DATA = \
-    .keep \
-    $(NULL)
-
-healthconfigdir = $(libconfigdir)/health.d
-dist_healthconfig_DATA = \
-    health.d/adaptec_raid.conf \
-    health.d/apache.conf \
-    health.d/apcupsd.conf \
-    health.d/backend.conf \
-    health.d/bcache.conf \
-    health.d/beanstalkd.conf \
-    health.d/bind_rndc.conf \
-    health.d/boinc.conf \
-    health.d/btrfs.conf \
-    health.d/ceph.conf \
-    health.d/cgroups.conf \
-    health.d/cpu.conf \
-    health.d/couchdb.conf \
-    health.d/disks.conf \
-    health.d/dockerd.conf \
-    health.d/elasticsearch.conf \
-    health.d/entropy.conf \
-    health.d/fping.conf \
-    health.d/fronius.conf \
-    health.d/haproxy.conf \
-    health.d/httpcheck.conf \
-    health.d/ipc.conf \
-    health.d/ipfs.conf \
-    health.d/ipmi.conf \
-    health.d/isc_dhcpd.conf \
-    health.d/lighttpd.conf \
-    health.d/linux_power_supply.conf \
-    health.d/load.conf \
-    health.d/mdstat.conf \
-    health.d/megacli.conf \
-    health.d/memcached.conf \
-    health.d/memory.conf \
-    health.d/mongodb.conf \
-    health.d/mysql.conf \
-    health.d/named.conf \
-    health.d/net.conf \
-    health.d/netfilter.conf \
-    health.d/nginx.conf \
-    health.d/nginx_plus.conf \
-    health.d/portcheck.conf \
-    health.d/postgres.conf \
-    health.d/qos.conf \
-    health.d/ram.conf \
-    health.d/redis.conf \
-    health.d/retroshare.conf \
-    health.d/softnet.conf \
-    health.d/squid.conf \
-    health.d/sslcheck.conf \
-    health.d/stiebeleltron.conf \
-    health.d/swap.conf \
-    health.d/tcp_conn.conf \
-    health.d/tcp_listen.conf \
-    health.d/tcp_mem.conf \
-    health.d/tcp_orphans.conf \
-    health.d/tcp_resets.conf \
-    health.d/udp_errors.conf \
-    health.d/varnish.conf \
-    health.d/web_log.conf \
-    health.d/zfs.conf \
-    $(NULL)
-
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu health/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu health/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_healthconfigDATA: $(dist_healthconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(healthconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(healthconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(healthconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(healthconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_healthconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_healthconfig_DATA)'; test -n "$(healthconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(healthconfigdir)'; $(am__uninstall_files_from_dir)
-install-dist_userhealthconfigDATA: $(dist_userhealthconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_userhealthconfig_DATA)'; test -n "$(userhealthconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(userhealthconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(userhealthconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(userhealthconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(userhealthconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_userhealthconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_userhealthconfig_DATA)'; test -n "$(userhealthconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(userhealthconfigdir)'; $(am__uninstall_files_from_dir)
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
-	@fail=; \
-	if $(am__make_keepgoing); then \
-	  failcom='fail=yes'; \
-	else \
-	  failcom='exit 1'; \
-	fi; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	$(am__define_uniq_tagged_files); \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-	$(am__define_uniq_tagged_files); \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(healthconfigdir)" "$(DESTDIR)$(userhealthconfigdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-dist_healthconfigDATA \
-	install-dist_userhealthconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-dist_healthconfigDATA \
-	uninstall-dist_userhealthconfigDATA
-
-.MAKE: $(am__recursive_targets) install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
-	check-am clean clean-generic cscopelist-am ctags ctags-am \
-	distclean distclean-generic distclean-tags distdir dvi dvi-am \
-	html html-am info info-am install install-am install-data \
-	install-data-am install-dist_healthconfigDATA \
-	install-dist_userhealthconfigDATA install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
-	uninstall-am uninstall-dist_healthconfigDATA \
-	uninstall-dist_userhealthconfigDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/health/health.d/kubelet.conf b/health/health.d/kubelet.conf
new file mode 100644
index 000000000..d2ef24b58
--- /dev/null
+++ b/health/health.d/kubelet.conf
@@ -0,0 +1,115 @@
+# you can disable an alarm notification by setting the 'to' line to: silent
+
+# -----------------------------------------------------------------------------
+
+# True (1) if the node is experiencing a configuration-related error, false (0) otherwise.
+
+   template: node_config_error
+         on: k8s_kubelet.kubelet_node_config_error
+       calc: $kubelet_node_config_error
+      units: bool
+      every: 10s
+       warn: $this == 1
+      delay: down 1m multiplier 1.5 max 2h
+       info: the node is experiencing a configuration-related error
+         to: sysadmin
+
+# Failed Token() requests to the alternate token source
+
+   template: token_requests
+     lookup: sum -10s of token_fail_count
+         on: k8s_kubelet.kubelet_token_requests
+      units: failed requests
+      every: 10s
+       warn: $this > 0
+      delay: down 1m multiplier 1.5 max 2h
+       info: failed token requests to alternate token source
+         to: sysadmin
+
+# Docker and runtime operation errors
+
+   template: kubelet_operations_error
+     lookup: sum -1m
+         on: k8s_kubelet.kubelet_operations_errors
+      units: errors
+      every: 10s
+       warn: $this > (($status >= $WARNING)  ? (0) : (20))
+      delay: up 30s down 1m multiplier 1.5 max 2h
+       info: operations error
+         to: sysadmin
+
+# -----------------------------------------------------------------------------
+
+# Pod Lifecycle Event Generator Relisting Latency
+
+# 1. calculate the pleg relisting latency for 1m (quantile 0.5, quantile 0.9, quantile 0.99)
+# 2. do the same for the last 10s
+# 3. raise an alarm if the later is:
+# - 2x the first for quantile 0.5
+# - 4x the first for quantile 0.9
+# - 8x the first for quantile 0.99
+#
+# we assume the minimum latency is 1000 microseconds
+
+# quantile 0.5
+
+template: 1m_kubelet_pleg_relist_latency_quantile_05
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -1m unaligned of kubelet_pleg_relist_latency_05
+   units: microseconds
+   every: 10s
+    info: the average value of pleg relisting latency during the last minute (quantile 0.5)
+
+template: 10s_kubelet_pleg_relist_latency_quantile_05
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -10s unaligned of kubelet_pleg_relist_latency_05
+    calc: $this * 100 / (($1m_kubelet_pleg_relist_latency_quantile_05 < 1000)?(1000):($1m_kubelet_pleg_relist_latency_quantile_05))
+   every: 10s
+   units: %
+   warn: $this > (($status >= $WARNING)?(100):(200))
+   crit: $this > (($status >= $WARNING)?(200):(400))
+  delay: down 1m multiplier 1.5 max 2h
+   info: the % of the pleg relisting latency in the last 10 seconds, compared to the last minute (quantile 0.5)
+     to: sysadmin
+
+# quantile 0.9
+
+template: 1m_kubelet_pleg_relist_latency_quantile_09
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -1m unaligned of kubelet_pleg_relist_latency_09
+   units: microseconds
+   every: 10s
+    info: the average value of pleg relisting latency during the last minute (quantile 0.9)
+
+template: 10s_kubelet_pleg_relist_latency_quantile_09
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -10s unaligned of kubelet_pleg_relist_latency_09
+    calc: $this * 100 / (($1m_kubelet_pleg_relist_latency_quantile_09 < 1000)?(1000):($1m_kubelet_pleg_relist_latency_quantile_09))
+   every: 10s
+   units: %
+   warn: $this > (($status >= $WARNING)?(200):(400))
+   crit: $this > (($status >= $WARNING)?(400):(800))
+  delay: down 1m multiplier 1.5 max 2h
+   info: the % of the pleg relisting latency in the last 10 seconds, compared to the last minute (quantile 0.9)
+     to: sysadmin
+
+# quantile 0.99
+
+template: 1m_kubelet_pleg_relist_latency_quantile_099
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -1m unaligned of kubelet_pleg_relist_latency_099
+   units: microseconds
+   every: 10s
+    info: the average value of pleg relisting latency during the last minute (quantile 0.99)
+
+template: 10s_kubelet_pleg_relist_latency_quantile_099
+      on: k8s_kubelet.kubelet_pleg_relist_latency_microseconds
+  lookup: average -10s unaligned of kubelet_pleg_relist_latency_099
+    calc: $this * 100 / (($1m_kubelet_pleg_relist_latency_quantile_099 < 1000)?(1000):($1m_kubelet_pleg_relist_latency_quantile_099))
+   every: 10s
+   units: %
+   warn: $this > (($status >= $WARNING)?(400):(800))
+   crit: $this > (($status >= $WARNING)?(800):(1200))
+  delay: down 1m multiplier 1.5 max 2h
+   info: the % of the pleg relisting latency in the last 10 seconds, compared to the last minute (quantile 0.99)
+     to: sysadmin
diff --git a/health/health.d/sslcheck.conf b/health/health.d/x509check.conf
index 29a017e3d..dc0e6c695 100644
--- a/health/health.d/sslcheck.conf
+++ b/health/health.d/x509check.conf
@@ -1,7 +1,7 @@
 
-template: sslcheck_days_until_expiration
-      on: sslcheck.time_until_expiration
-   calc:  $time
+template: x509check_days_until_expiration
+      on: x509check.time_until_expiration
+   calc:  $expiry
    units: seconds
    every: 60s
     warn: $this < $days_until_expiration_warning*24*60*60
diff --git a/health/notifications/Makefile.am b/health/notifications/Makefile.am
index a5b88f0de..e3970de04 100644
--- a/health/notifications/Makefile.am
+++ b/health/notifications/Makefile.am
@@ -39,7 +39,9 @@ include pushbullet/Makefile.inc
 include pushover/Makefile.inc
 include rocketchat/Makefile.inc
 include slack/Makefile.inc
+include smstools3/Makefile.inc
 include syslog/Makefile.inc
 include telegram/Makefile.inc
 include twilio/Makefile.inc
 include web/Makefile.inc
+include custom/Makefile.inc
\ No newline at end of file
diff --git a/health/notifications/Makefile.in b/health/notifications/Makefile.in
deleted file mode 100644
index 96e48e922..000000000
--- a/health/notifications/Makefile.in
+++ /dev/null
@@ -1,756 +0,0 @@
-# Makefile.in generated by automake 1.14.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-# THIS IS NOT A COMPLETE Makefile
-# IT IS INCLUDED BY ITS PARENT'S Makefile.am
-# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = $(top_srcdir)/build/subst.inc \
-	$(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc \
-	$(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc \
-	$(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc \
-	$(srcdir)/kavenegar/Makefile.inc \
-	$(srcdir)/messagebird/Makefile.inc \
-	$(srcdir)/pagerduty/Makefile.inc \
-	$(srcdir)/pushbullet/Makefile.inc \
-	$(srcdir)/pushover/Makefile.inc \
-	$(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc \
-	$(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc \
-	$(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc \
-	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(dist_plugins_SCRIPTS) $(dist_libconfig_DATA) \
-	$(dist_noinst_DATA)
-subdir = health/notifications
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
-	$(top_srcdir)/build/m4/ax_c__generic.m4 \
-	$(top_srcdir)/build/m4/ax_c_lto.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
-	$(top_srcdir)/build/m4/ax_c_mallopt.m4 \
-	$(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
-	$(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
-	$(top_srcdir)/build/m4/ax_pthread.m4 \
-	$(top_srcdir)/build/m4/jemalloc.m4 \
-	$(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(pluginsdir)" \
-	"$(DESTDIR)$(libconfigdir)"
-SCRIPTS = $(dist_plugins_SCRIPTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-DATA = $(dist_libconfig_DATA) $(dist_noinst_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CUPSCONFIG = @CUPSCONFIG@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
-IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
-LDFLAGS = @LDFLAGS@
-LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
-LIBCAP_LIBS = @LIBCAP_LIBS@
-LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
-LIBMNL_LIBS = @LIBMNL_LIBS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MATH_CFLAGS = @MATH_CFLAGS@
-MATH_LIBS = @MATH_LIBS@
-MKDIR_P = @MKDIR_P@
-NFACCT_CFLAGS = @NFACCT_CFLAGS@
-NFACCT_LIBS = @NFACCT_LIBS@
-OBJEXT = @OBJEXT@
-OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
-OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
-OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
-OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
-OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
-OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
-OPTIONAL_MATH_CLFAGS = @OPTIONAL_MATH_CLFAGS@
-OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
-OPTIONAL_NFACCT_CLFAGS = @OPTIONAL_NFACCT_CLFAGS@
-OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
-OPTIONAL_UUID_CLFAGS = @OPTIONAL_UUID_CLFAGS@
-OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
-OPTIONAL_ZLIB_CLFAGS = @OPTIONAL_ZLIB_CLFAGS@
-OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-PTHREAD_CC = @PTHREAD_CC@
-PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
-PTHREAD_LIBS = @PTHREAD_LIBS@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SSE_CANDIDATE = @SSE_CANDIDATE@
-STRIP = @STRIP@
-UUID_CFLAGS = @UUID_CFLAGS@
-UUID_LIBS = @UUID_LIBS@
-VERSION = @VERSION@
-ZLIB_CFLAGS = @ZLIB_CFLAGS@
-ZLIB_LIBS = @ZLIB_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-ax_pthread_config = @ax_pthread_config@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_target = @build_target@
-build_vendor = @build_vendor@
-builddir = @builddir@
-cachedir = @cachedir@
-chartsdir = @chartsdir@
-configdir = @configdir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-has_jemalloc = @has_jemalloc@
-has_tcmalloc = @has_tcmalloc@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libconfigdir = @libconfigdir@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-logdir = @logdir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-nodedir = @nodedir@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-pluginsdir = @pluginsdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-pythondir = @pythondir@
-registrydir = @registrydir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-varlibdir = @varlibdir@
-webdir = @webdir@
-AUTOMAKE_OPTIONS = subdir-objects
-MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
-CLEANFILES = \
-	alarm-notify.sh \
-	$(NULL)
-
-SUFFIXES = .in
-dist_libconfig_DATA = \
-    health_alarm_notify.conf \
-    health_email_recipients.conf \
-    $(NULL)
-
-dist_plugins_SCRIPTS = \
-	alarm-notify.sh \
-	alarm-email.sh \
-	alarm-test.sh \
-	$(NULL)
-
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-
-# install these files
-dist_noinst_DATA = alarm-notify.sh.in README.md $(NULL) \
-	alerta/README.md alerta/Makefile.inc $(NULL) awssns/README.md \
-	awssns/Makefile.inc $(NULL) discord/README.md \
-	discord/Makefile.inc $(NULL) email/README.md \
-	email/Makefile.inc $(NULL) flock/README.md flock/Makefile.inc \
-	$(NULL) irc/README.md irc/Makefile.inc $(NULL) \
-	kavenegar/README.md kavenegar/Makefile.inc $(NULL) \
-	messagebird/README.md messagebird/Makefile.inc $(NULL) \
-	pagerduty/README.md pagerduty/Makefile.inc $(NULL) \
-	pushbullet/README.md pushbullet/Makefile.inc $(NULL) \
-	pushover/README.md pushover/Makefile.inc $(NULL) \
-	rocketchat/README.md rocketchat/Makefile.inc $(NULL) \
-	slack/README.md slack/Makefile.inc $(NULL) syslog/README.md \
-	syslog/Makefile.inc $(NULL) telegram/README.md \
-	telegram/Makefile.inc $(NULL) twilio/README.md \
-	twilio/Makefile.inc $(NULL) web/README.md web/Makefile.inc \
-	$(NULL)
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .in
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu health/notifications/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu health/notifications/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-$(top_srcdir)/build/subst.inc $(srcdir)/alerta/Makefile.inc $(srcdir)/awssns/Makefile.inc $(srcdir)/discord/Makefile.inc $(srcdir)/email/Makefile.inc $(srcdir)/flock/Makefile.inc $(srcdir)/irc/Makefile.inc $(srcdir)/kavenegar/Makefile.inc $(srcdir)/messagebird/Makefile.inc $(srcdir)/pagerduty/Makefile.inc $(srcdir)/pushbullet/Makefile.inc $(srcdir)/pushover/Makefile.inc $(srcdir)/rocketchat/Makefile.inc $(srcdir)/slack/Makefile.inc $(srcdir)/syslog/Makefile.inc $(srcdir)/telegram/Makefile.inc $(srcdir)/twilio/Makefile.inc $(srcdir)/web/Makefile.inc:
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-dist_pluginsSCRIPTS: $(dist_plugins_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pluginsdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pluginsdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n' \
-	    -e 'h;s|.*|.|' \
-	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
-	      if (++n[d] == $(am__install_max)) { \
-		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
-	    else { print "f", d "/" $$4, $$1 } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	     test -z "$$files" || { \
-	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pluginsdir)$$dir'"; \
-	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pluginsdir)$$dir" || exit $$?; \
-	     } \
-	; done
-
-uninstall-dist_pluginsSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_plugins_SCRIPTS)'; test -n "$(pluginsdir)" || exit 0; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	       sed -e 's,.*/,,;$(transform)'`; \
-	dir='$(DESTDIR)$(pluginsdir)'; $(am__uninstall_files_from_dir)
-install-dist_libconfigDATA: $(dist_libconfig_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(libconfigdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(libconfigdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libconfigdir)" || exit $$?; \
-	done
-
-uninstall-dist_libconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(dist_libconfig_DATA)'; test -n "$(libconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(libconfigdir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(pluginsdir)" "$(DESTDIR)$(libconfigdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-dist_libconfigDATA \
-	install-dist_pluginsSCRIPTS
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-dist_libconfigDATA \
-	uninstall-dist_pluginsSCRIPTS
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dist_libconfigDATA \
-	install-dist_pluginsSCRIPTS install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags-am uninstall uninstall-am \
-	uninstall-dist_libconfigDATA uninstall-dist_pluginsSCRIPTS
-
-.in:
-	if sed \
-		-e 's#[@]localstatedir_POST@#$(localstatedir)#g' \
-		-e 's#[@]sbindir_POST@#$(sbindir)#g' \
-		-e 's#[@]configdir_POST@#$(configdir)#g' \
-		-e 's#[@]libconfigdir_POST@#$(libconfigdir)#g' \
-		-e 's#[@]cachedir_POST@#$(cachedir)#g' \
-		-e 's#[@]registrydir_POST@#$(registrydir)#g' \
-		-e 's#[@]varlibdir_POST@#$(varlibdir)#g' \
-		$< > $@.tmp; then \
-		mv "$@.tmp" "$@"; \
-	else \
-		rm -f "$@.tmp"; \
-		false; \
-	fi
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/health/notifications/alarm-notify.sh b/health/notifications/alarm-notify.sh
deleted file mode 100644
index 41099df71..000000000
--- a/health/notifications/alarm-notify.sh
+++ /dev/null
@@ -1,2219 +0,0 @@
-#!/usr/bin/env bash
-#shellcheck source=/dev/null disable=SC2086,SC2154
-
-# netdata
-# real-time performance and health monitoring, done right!
-# (C) 2017 Costa Tsaousis <costa@tsaousis.gr>
-# SPDX-License-Identifier: GPL-3.0-or-later
-#
-# Script to send alarm notifications for netdata
-#
-# Features:
-#  - multiple notification methods
-#  - multiple roles per alarm
-#  - multiple recipients per role
-#  - severity filtering per recipient
-#
-# Supported notification methods:
-#  - emails by @ktsaou
-#  - slack.com notifications by @ktsaou
-#  - alerta.io notifications by @kattunga
-#  - discordapp.com notifications by @lowfive
-#  - pushover.net notifications by @ktsaou
-#  - pushbullet.com push notifications by Tiago Peralta @tperalta82 #1070
-#  - telegram.org notifications by @hashworks #1002
-#  - twilio.com notifications by Levi Blaney @shadycuz #1211
-#  - kafka notifications by @ktsaou #1342
-#  - pagerduty.com notifications by Jim Cooley @jimcooley #1373
-#  - messagebird.com notifications by @tech_no_logical #1453
-#  - hipchat notifications by @ktsaou #1561
-#  - fleep notifications by @Ferroin
-#  - prowlapp.com notifications by @Ferroin
-#  - custom notifications by @ktsaou
-#  - syslog messages by @Ferroin
-#  - Microsoft Team notification by @tioumen
-#  - RocketChat notifications by @Hermsi1337 #3777
-
-# -----------------------------------------------------------------------------
-# testing notifications
-
-if { [ "${1}" = "test" ] || [ "${2}" = "test" ]; } && [ "${#}" -le 2 ]; then
-	if [ "${2}" = "test" ]; then
-		recipient="${1}"
-	else
-		recipient="${2}"
-	fi
-
-	[ -z "${recipient}" ] && recipient="sysadmin"
-
-	id=1
-	last="CLEAR"
-	test_res=0
-	for x in "WARNING" "CRITICAL" "CLEAR"; do
-		echo >&2
-		echo >&2 "# SENDING TEST ${x} ALARM TO ROLE: ${recipient}"
-
-		"${0}" "${recipient}" "$(hostname)" 1 1 "${id}" "$(date +%s)" "test_alarm" "test.chart" "test.family" "${x}" "${last}" 100 90 "${0}" 1 $((0 + id)) "units" "this is a test alarm to verify notifications work" "new value" "old value" "evaluated expression" "expression variable values" 0 0
-		#shellcheck disable=SC2181
-		if [ $? -ne 0 ]; then
-			echo >&2 "# FAILED"
-			test_res=1
-		else
-			echo >&2 "# OK"
-		fi
-
-		last="${x}"
-		id=$((id + 1))
-	done
-
-	exit $test_res
-fi
-
-export PATH="${PATH}:/sbin:/usr/sbin:/usr/local/sbin"
-export LC_ALL=C
-
-# -----------------------------------------------------------------------------
-
-PROGRAM_NAME="$(basename "${0}")"
-
-logdate() {
-	date "+%Y-%m-%d %H:%M:%S"
-}
-
-log() {
-	local status="${1}"
-	shift
-
-	echo >&2 "$(logdate): ${PROGRAM_NAME}: ${status}: ${*}"
-
-}
-
-warning() {
-	log WARNING "${@}"
-}
-
-error() {
-	log ERROR "${@}"
-}
-
-info() {
-	log INFO "${@}"
-}
-
-fatal() {
-	log FATAL "${@}"
-	exit 1
-}
-
-debug=${NETDATA_ALARM_NOTIFY_DEBUG-0}
-debug() {
-	[ "${debug}" = "1" ] && log DEBUG "${@}"
-}
-
-docurl() {
-	if [ -z "${curl}" ]; then
-		error "${curl} is unset."
-		return 1
-	fi
-
-	if [ "${debug}" = "1" ]; then
-		echo >&2 "--- BEGIN curl command ---"
-		printf >&2 "%q " ${curl} "${@}"
-		echo >&2
-		echo >&2 "--- END curl command ---"
-
-		local out code ret
-		out=$(mktemp /tmp/netdata-health-alarm-notify-XXXXXXXX)
-		code=$(${curl} ${curl_options} --write-out "%{http_code}" --output "${out}" --silent --show-error "${@}")
-		ret=$?
-		echo >&2 "--- BEGIN received response ---"
-		cat >&2 "${out}"
-		echo >&2
-		echo >&2 "--- END received response ---"
-		echo >&2 "RECEIVED HTTP RESPONSE CODE: ${code}"
-		rm "${out}"
-		echo "${code}"
-		return ${ret}
-	fi
-
-	${curl} ${curl_options} --write-out "%{http_code}" --output /dev/null --silent --show-error "${@}"
-	return $?
-}
-
-# -----------------------------------------------------------------------------
-# List of all the notification mechanisms we support.
-# Used in a couple of places to write more compact code.
-
-method_names="
-email
-pushover
-pushbullet
-telegram
-slack
-alerta
-flock
-discord
-hipchat
-twilio
-messagebird
-pd
-fleep
-syslog
-custom
-msteam
-kavenegar
-prowl
-awssns
-rocketchat
-"
-
-# -----------------------------------------------------------------------------
-# this is to be overwritten by the config file
-
-custom_sender() {
-	info "not sending custom notification for ${status} of '${host}.${chart}.${name}'"
-}
-
-# -----------------------------------------------------------------------------
-
-# check for BASH v4+ (required for associative arrays)
-if [ ${BASH_VERSINFO[0]} -lt 4 ]; then
-	fatal "BASH version 4 or later is required (this is ${BASH_VERSION})."
-fi
-
-# -----------------------------------------------------------------------------
-# defaults to allow running this script by hand
-
-[ -z "${NETDATA_USER_CONFIG_DIR}" ] && NETDATA_USER_CONFIG_DIR="/etc/netdata"
-[ -z "${NETDATA_STOCK_CONFIG_DIR}" ] && NETDATA_STOCK_CONFIG_DIR="/usr/lib/netdata/conf.d"
-[ -z "${NETDATA_CACHE_DIR}" ] && NETDATA_CACHE_DIR="/var/cache/netdata"
-[ -z "${NETDATA_REGISTRY_URL}" ] && NETDATA_REGISTRY_URL="https://registry.my-netdata.io"
-
-# -----------------------------------------------------------------------------
-# parse command line parameters
-
-if [ ${1} = "unittest" ]; then
-	unittest=1        # enable unit testing mode
-	roles="${2}"      # the role that should be used for unit testing
-	cfgfile="${3}"    # the location of the config file to use for unit testing
-	status="${4}"     # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
-	old_status="${5}" # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
-else
-	roles="${1}"               # the roles that should be notified for this event
-	args_host="${2}"           # the host generated this event
-	unique_id="${3}"           # the unique id of this event
-	alarm_id="${4}"            # the unique id of the alarm that generated this event
-	event_id="${5}"            # the incremental id of the event, for this alarm id
-	when="${6}"                # the timestamp this event occurred
-	name="${7}"                # the name of the alarm, as given in netdata health.d entries
-	chart="${8}"               # the name of the chart (type.id)
-	family="${9}"              # the family of the chart
-	status="${10}"             # the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
-	old_status="${11}"         # the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
-	value="${12}"              # the current value of the alarm
-	old_value="${13}"          # the previous value of the alarm
-	src="${14}"                # the line number and file the alarm has been configured
-	duration="${15}"           # the duration in seconds of the previous alarm state
-	non_clear_duration="${16}" # the total duration in seconds this is/was non-clear
-	units="${17}"              # the units of the value
-	info="${18}"               # a short description of the alarm
-	value_string="${19}"       # friendly value (with units)
-	# shellcheck disable=SC2034
-	# variable is unused, but https://github.com/netdata/netdata/pull/5164#discussion_r255572947
-	old_value_string="${20}"   # friendly old value (with units), previously named "old_value_string"
-	calc_expression="${21}"    # contains the expression that was evaluated to trigger the alarm
-	calc_param_values="${22}"  # the values of the parameters in the expression, at the time of the evaluation
-	total_warnings="${23}"     # Total number of alarms in WARNING state
-	total_critical="${24}"     # Total number of alarms in CRITICAL state
-fi
-
-# -----------------------------------------------------------------------------
-# find a suitable hostname to use, if netdata did not supply a hostname
-
-if [ -z ${args_host} ]; then
-	this_host=$(hostname -s 2>/dev/null)
-	host="${this_host}"
-	args_host="${this_host}"
-else
-	host="${args_host}"
-fi
-
-# -----------------------------------------------------------------------------
-# screen statuses we don't need to send a notification
-
-# don't do anything if this is not WARNING, CRITICAL or CLEAR
-if [ "${status}" != "WARNING" ] && [ "${status}" != "CRITICAL" ] && [ "${status}" != "CLEAR" ]; then
-	info "not sending notification for ${status} of '${host}.${chart}.${name}'"
-	exit 1
-fi
-
-# don't do anything if this is CLEAR, but it was not WARNING or CRITICAL
-if [ "${clear_alarm_always}" != "YES" ] && [ "${old_status}" != "WARNING" ] && [ "${old_status}" != "CRITICAL" ] && [ "${status}" = "CLEAR" ]; then
-	info "not sending notification for ${status} of '${host}.${chart}.${name}' (last status was ${old_status})"
-	exit 1
-fi
-
-# -----------------------------------------------------------------------------
-# load configuration
-
-# By default fetch images from the global public registry.
-# This is required by default, since all notification methods need to download
-# images via the Internet, and private registries might not be reachable.
-# This can be overwritten at the configuration file.
-images_base_url="https://registry.my-netdata.io"
-
-# curl options to use
-curl_options=""
-
-# hostname handling
-use_fqdn="NO"
-
-# needed commands
-# if empty they will be searched in the system path
-curl=
-sendmail=
-
-# enable / disable features
-for method_name in ${method_names^^}; do
-	declare SEND_${method_name}="YES"
-	declare DEFAULT_RECIPIENT_${method_name}
-done
-
-for method_name in ${method_names}; do
-	declare -A role_recipients_${method_name}
-done
-
-# slack configs
-SLACK_WEBHOOK_URL=
-
-# Microsoft Team configs
-MSTEAM_WEBHOOK_URL=
-
-# rocketchat configs
-ROCKETCHAT_WEBHOOK_URL=
-
-# alerta configs
-ALERTA_WEBHOOK_URL=
-ALERTA_API_KEY=
-
-# flock configs
-FLOCK_WEBHOOK_URL=
-
-# discord configs
-DISCORD_WEBHOOK_URL=
-
-# pushover configs
-PUSHOVER_APP_TOKEN=
-
-# pushbullet configs
-PUSHBULLET_ACCESS_TOKEN=
-PUSHBULLET_SOURCE_DEVICE=
-
-# twilio configs
-TWILIO_ACCOUNT_SID=
-TWILIO_ACCOUNT_TOKEN=
-TWILIO_NUMBER=
-
-# hipchat configs
-HIPCHAT_SERVER=
-HIPCHAT_AUTH_TOKEN=
-
-# messagebird configs
-MESSAGEBIRD_ACCESS_KEY=
-MESSAGEBIRD_NUMBER=
-
-# kavenegar configs
-KAVENEGAR_API_KEY=
-KAVENEGAR_SENDER=
-
-# telegram configs
-TELEGRAM_BOT_TOKEN=
-
-# kafka configs
-SEND_KAFKA="YES"
-KAFKA_URL=
-KAFKA_SENDER_IP=
-
-# pagerduty.com configs
-PD_SERVICE_KEY=
-
-# fleep.io configs
-FLEEP_SENDER="${host}"
-
-# Amazon SNS configs
-AWSSNS_MESSAGE_FORMAT=
-
-# syslog configs
-SYSLOG_FACILITY=
-
-# email configs
-EMAIL_SENDER=
-EMAIL_CHARSET=$(locale charmap 2>/dev/null)
-EMAIL_THREADING=
-
-# irc configs
-IRC_NICKNAME=
-IRC_REALNAME=
-IRC_NETWORK=
-
-# load the stock and user configuration files
-# these will overwrite the variables above
-
-if [ ${unittest} ]; then
-	if source "${cfgfile}"; then
-		error "Failed to load requested config file."
-		exit 1
-	fi
-else
-	for CONFIG in "${NETDATA_STOCK_CONFIG_DIR}/health_alarm_notify.conf" "${NETDATA_USER_CONFIG_DIR}/health_alarm_notify.conf"; do
-		if [ -f "${CONFIG}" ]; then
-			debug "Loading config file '${CONFIG}'..."
-			source "${CONFIG}" || error "Failed to load config file '${CONFIG}'."
-		else
-			warning "Cannot find file '${CONFIG}'."
-		fi
-	done
-fi
-
-# If we didn't autodetect the character set for e-mail and it wasn't
-# set by the user, we need to set it to a reasonable default.  UTF-8
-# should be correct for almost all modern UNIX systems.
-if [ -z ${EMAIL_CHARSET} ]; then
-	EMAIL_CHARSET="UTF-8"
-fi
-
-# If we've been asked to use FQDN's for the URL's in the alarm, do so,
-# unless we're sending an alarm for a slave system which we can't get the
-# FQDN of easily.
-if [ "${use_fqdn}" = "YES" ] && [ "${host}" = "$(hostname -s 2>/dev/null)" ]; then
-	host="$(hostname -f 2>/dev/null)"
-fi
-
-# -----------------------------------------------------------------------------
-# filter a recipient based on alarm event severity
-
-filter_recipient_by_criticality() {
-	local method="${1}" x="${2}" r s
-	shift
-
-	r="${x/|*/}" # the recipient
-	s="${x/*|/}" # the severity required for notifying this recipient
-
-	# no severity filtering for this person
-	[ "${r}" = "${s}" ] && return 0
-
-	# the severity is invalid
-	s="${s^^}"
-	if [ "${s}" != "CRITICAL" ]; then
-		error "SEVERITY FILTERING for ${x} VIA ${method}: invalid severity '${s,,}', only 'critical' is supported."
-		return 0
-	fi
-
-	# create the status tracking directory for this user
-	[ ! -d "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}" ] &&
-		mkdir -p "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}"
-
-	case "${status}" in
-	CRITICAL)
-		# make sure he will get future notifications for this alarm too
-		touch "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}"
-		debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: the alarm is CRITICAL (will now receive next status change)"
-		return 0
-		;;
-
-	WARNING)
-		if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then
-			# we do not remove the file, so that he will get future notifications of this alarm
-			debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm in the past (will still receive next status change)"
-			return 0
-		fi
-		;;
-
-	*)
-		if [ -f "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}" ]; then
-			# remove the file, so that he will only receive notifications for CRITICAL states for this alarm
-			rm "${NETDATA_CACHE_DIR}/alarm-notify/${method}/${r}/${alarm_id}"
-			debug "SEVERITY FILTERING for ${x} VIA ${method}: ALLOW: recipient has been notified for this alarm (will only receive CRITICAL notifications from now on)"
-			return 0
-		fi
-		;;
-	esac
-
-	debug "SEVERITY FILTERING for ${x} VIA ${method}: BLOCK: recipient should not receive this notification"
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# verify the delivery methods supported
-
-# check slack
-[ -z "${SLACK_WEBHOOK_URL}" ] && SEND_SLACK="NO"
-
-# check rocketchat
-[ -z "${ROCKETCHAT_WEBHOOK_URL}" ] && SEND_ROCKETCHAT="NO"
-
-# check alerta
-[ -z "${ALERTA_WEBHOOK_URL}" ] && SEND_ALERTA="NO"
-
-# check flock
-[ -z "${FLOCK_WEBHOOK_URL}" ] && SEND_FLOCK="NO"
-
-# check discord
-[ -z "${DISCORD_WEBHOOK_URL}" ] && SEND_DISCORD="NO"
-
-# check pushover
-[ -z "${PUSHOVER_APP_TOKEN}" ] && SEND_PUSHOVER="NO"
-
-# check pushbullet
-[ -z "${PUSHBULLET_ACCESS_TOKEN}" ] && SEND_PUSHBULLET="NO"
-
-# check twilio
-{ [ -z "${TWILIO_ACCOUNT_TOKEN}" ] || [ -z "${TWILIO_ACCOUNT_SID}" ] || [ -z "${TWILIO_NUMBER}" ]; } && SEND_TWILIO="NO"
-
-# check hipchat
-[ -z "${HIPCHAT_AUTH_TOKEN}" ] && SEND_HIPCHAT="NO"
-
-# check messagebird
-{ [ -z "${MESSAGEBIRD_ACCESS_KEY}" ] || [ -z "${MESSAGEBIRD_NUMBER}" ]; } && SEND_MESSAGEBIRD="NO"
-
-# check kavenegar
-{ [ -z "${KAVENEGAR_API_KEY}" ] || [ -z "${KAVENEGAR_SENDER}" ]; } && SEND_KAVENEGAR="NO"
-
-# check telegram
-[ -z "${TELEGRAM_BOT_TOKEN}" ] && SEND_TELEGRAM="NO"
-
-# check kafka
-{ [ -z "${KAFKA_URL}" ] || [ -z "${KAFKA_SENDER_IP}" ]; } && SEND_KAFKA="NO"
-
-# check irc
-[ -z "${IRC_NETWORK}" ] && SEND_IRC="NO"
-
-# check fleep
-#shellcheck disable=SC2153
-{ [ -z "${FLEEP_SERVER}" ] || [ -z "${FLEEP_SENDER}" ]; } && SEND_FLEEP="NO"
-
-if [ "${SEND_PUSHOVER}" = "YES" ] ||
-	[ "${SEND_SLACK}" = "YES" ] ||
-	[ "${SEND_ROCKETCHAT}" = "YES" ] ||
-	[ "${SEND_ALERTA}" = "YES" ] ||
-	[ "${SEND_PD}" = "YES" ] ||
-	[ "${SEND_FLOCK}" = "YES" ] ||
-	[ "${SEND_DISCORD}" = "YES" ] ||
-	[ "${SEND_HIPCHAT}" = "YES" ] ||
-	[ "${SEND_TWILIO}" = "YES" ] ||
-	[ "${SEND_MESSAGEBIRD}" = "YES" ] ||
-	[ "${SEND_KAVENEGAR}" = "YES" ] ||
-	[ "${SEND_TELEGRAM}" = "YES" ] ||
-	[ "${SEND_PUSHBULLET}" = "YES" ] ||
-	[ "${SEND_KAFKA}" = "YES" ] ||
-	[ "${SEND_FLEEP}" = "YES" ] ||
-	[ "${SEND_PROWL}" = "YES" ] ||
-	[ "${SEND_CUSTOM}" = "YES" ] ||
-	[ "${SEND_MSTEAM}" = "YES" ]; then
-	# if we need curl, check for the curl command
-	if [ -z "${curl}" ]; then
-		curl="$(command -v curl 2>/dev/null)"
-	fi
-	if [ -z "${curl}" ]; then
-		error "Cannot find curl command in the system path. Disabling all curl based notifications."
-		SEND_PUSHOVER="NO"
-		SEND_PUSHBULLET="NO"
-		SEND_TELEGRAM="NO"
-		SEND_SLACK="NO"
-		SEND_MSTEAM="NO"
-		SEND_ROCKETCHAT="NO"
-		SEND_ALERTA="NO"
-		SEND_PD="NO"
-		SEND_FLOCK="NO"
-		SEND_DISCORD="NO"
-		SEND_TWILIO="NO"
-		SEND_HIPCHAT="NO"
-		SEND_MESSAGEBIRD="NO"
-		SEND_KAVENEGAR="NO"
-		SEND_KAFKA="NO"
-		SEND_FLEEP="NO"
-		SEND_PROWL="NO"
-		SEND_CUSTOM="NO"
-	fi
-fi
-
-# if we need sendmail, check for the sendmail command
-if [ "${SEND_EMAIL}" = "YES" ] && [ -z "${sendmail}" ]; then
-	sendmail="$(command -v sendmail 2>/dev/null)"
-	if [ -z "${sendmail}" ]; then
-		debug "Cannot find sendmail command in the system path. Disabling email notifications."
-		SEND_EMAIL="NO"
-	fi
-fi
-
-# if we need logger, check for the logger command
-if [ "${SEND_SYSLOG}" = "YES" ] && [ -z "${logger}" ]; then
-	logger="$(command -v logger 2>/dev/null)"
-	if [ -z "${logger}" ]; then
-		debug "Cannot find logger command in the system path. Disabling syslog notifications."
-		SEND_SYSLOG="NO"
-	fi
-fi
-
-# if we need aws, check for the aws command
-if [ "${SEND_AWSSNS}" = "YES" ] && [ -z "${aws}" ]; then
-	aws="$(command -v aws 2>/dev/null)"
-	if [ -z "${aws}" ]; then
-		debug "Cannot find aws command in the system path.  Disabling Amazon SNS notifications."
-		SEND_AWSSNS="NO"
-	fi
-fi
-
-# -----------------------------------------------------------------------------
-# find the recipients' addresses per method
-
-# netdata may call us with multiple roles, and roles may have multiple but
-# overlapping recipients - so, here we find the unique recipients.
-for method_name in ${method_names}; do
-	send_var="SEND_${method_name^^}"
-	if [ "${!send_var}" = "NO" ]; then
-		continue
-	fi
-
-	declare -A arr_var=()
-
-	for x in ${roles//,/ }; do
-		# the roles 'silent' and 'disabled' mean:
-		# don't send a notification for this role
-		if [ "${x}" = "silent" ] || [ "${x}" = "disabled" ]; then
-			continue
-		fi
-
-		role_recipients="role_recipients_${method_name}[$x]"
-		default_recipient_var="DEFAULT_RECIPIENT_${method_name^^}"
-
-		a="${!role_recipients}"
-		[ -z "${a}" ] && a="${!default_recipient_var}"
-		for r in ${a//,/ }; do
-			[ "${r}" != "disabled" ] && filter_recipient_by_criticality ${method_name} "${r}" && arr_var[${r/|*/}]="1"
-		done
-	done
-
-	# build the list of recipients
-	to_var="to_${method_name}"
-	declare to_${method_name}="${!arr_var[*]}"
-
-	[ -z "${!to_var}" ] && declare ${send_var}="NO"
-done
-
-# -----------------------------------------------------------------------------
-# handle fixup of the email recipient list.
-
-fix_to_email() {
-	to_email=
-	while [ -n "${1}" ]; do
-		[ -n "${to_email}" ] && to_email="${to_email}, "
-		to_email="${to_email}${1}"
-		shift 1
-	done
-}
-
-# ${to_email} without quotes here
-fix_to_email ${to_email}
-
-# -----------------------------------------------------------------------------
-# handle output if we're running in unit test mode
-if [ ${unittest} ]; then
-	for method_name in ${method_names}; do
-		to_var="to_${method_name}"
-		echo "results: ${method_name}: ${!to_var}"
-	done
-	exit 0
-fi
-
-# -----------------------------------------------------------------------------
-# check that we have at least a method enabled
-proceed=0
-for method in "${SEND_EMAIL}" \
-	"${SEND_PUSHOVER}" \
-	"${SEND_TELEGRAM}" \
-	"${SEND_SLACK}" \
-	"${SEND_ROCKETCHAT}" \
-	"${SEND_ALERTA}" \
-	"${SEND_FLOCK}" \
-	"${SEND_DISCORD}" \
-	"${SEND_TWILIO}" \
-	"${SEND_HIPCHAT}" \
-	"${SEND_MESSAGEBIRD}" \
-	"${SEND_KAVENEGAR}" \
-	"${SEND_PUSHBULLET}" \
-	"${SEND_KAFKA}" \
-	"${SEND_PD}" \
-	"${SEND_FLEEP}" \
-	"${SEND_CUSTOM}" \
-	"${SEND_IRC}" \
-	"${SEND_AWSSNS}" \
-	"${SEND_SYSLOG}" \
-	"${SEND_MSTEAM}"; do
-	if [ "${method}" == "YES" ]; then
-		proceed=1
-		break
-	fi
-done
-if [ "$proceed" -eq 0 ]; then
-	fatal "All notification methods are disabled. Not sending notification for host '${host}', chart '${chart}' to '${roles}' for '${name}' = '${value}' for status '${status}'."
-fi
-
-# -----------------------------------------------------------------------------
-# get the date the alarm happened
-
-date=$(date --date=@${when} "${date_format}" 2>/dev/null)
-[ -z "${date}" ] && date=$(date "${date_format}" 2>/dev/null)
-[ -z "${date}" ] && date=$(date --date=@${when} 2>/dev/null)
-[ -z "${date}" ] && date=$(date 2>/dev/null)
-
-# ----------------------------------------------------------------------------
-# prepare some extra headers if we've been asked to thread e-mails
-if [ "${SEND_EMAIL}" == "YES" ] && [ "${EMAIL_THREADING}" != "NO" ]; then
-	email_thread_headers="In-Reply-To: <${chart}-${name}@${host}>\\nReferences: <${chart}-${name}@${host}>"
-else
-	email_thread_headers=
-fi
-
-# -----------------------------------------------------------------------------
-# function to URL encode a string
-
-urlencode() {
-	local string="${1}" strlen encoded pos c o
-
-	strlen=${#string}
-	for ((pos = 0; pos < strlen; pos++)); do
-		c=${string:pos:1}
-		case "${c}" in
-		[-_.~a-zA-Z0-9])
-			o="${c}"
-			;;
-
-		*)
-			printf -v o '%%%02x' "'${c}"
-			;;
-		esac
-		encoded+="${o}"
-	done
-
-	REPLY="${encoded}"
-	echo "${REPLY}"
-}
-
-# -----------------------------------------------------------------------------
-# function to convert a duration in seconds, to a human readable duration
-# using DAYS, MINUTES, SECONDS
-
-duration4human() {
-	local s="${1}" d=0 h=0 m=0 ds="day" hs="hour" ms="minute" ss="second" ret
-	d=$((s / 86400))
-	s=$((s - (d * 86400)))
-	h=$((s / 3600))
-	s=$((s - (h * 3600)))
-	m=$((s / 60))
-	s=$((s - (m * 60)))
-
-	if [ ${d} -gt 0 ]; then
-		[ ${m} -ge 30 ] && h=$((h + 1))
-		[ ${d} -gt 1 ] && ds="days"
-		[ ${h} -gt 1 ] && hs="hours"
-		if [ ${h} -gt 0 ]; then
-			ret="${d} ${ds} and ${h} ${hs}"
-		else
-			ret="${d} ${ds}"
-		fi
-	elif [ ${h} -gt 0 ]; then
-		[ ${s} -ge 30 ] && m=$((m + 1))
-		[ ${h} -gt 1 ] && hs="hours"
-		[ ${m} -gt 1 ] && ms="minutes"
-		if [ ${m} -gt 0 ]; then
-			ret="${h} ${hs} and ${m} ${ms}"
-		else
-			ret="${h} ${hs}"
-		fi
-	elif [ ${m} -gt 0 ]; then
-		[ ${m} -gt 1 ] && ms="minutes"
-		[ ${s} -gt 1 ] && ss="seconds"
-		if [ ${s} -gt 0 ]; then
-			ret="${m} ${ms} and ${s} ${ss}"
-		else
-			ret="${m} ${ms}"
-		fi
-	else
-		[ ${s} -gt 1 ] && ss="seconds"
-		ret="${s} ${ss}"
-	fi
-
-	REPLY="${ret}"
-	echo "${REPLY}"
-}
-
-# -----------------------------------------------------------------------------
-# email sender
-
-send_email() {
-	local ret opts=() sender_email="${EMAIL_SENDER}" sender_name=
-	if [ "${SEND_EMAIL}" = "YES" ]; then
-
-		if [ -n "${EMAIL_SENDER}" ]; then
-			if [[ ${EMAIL_SENDER} =~ ^\".*\"\ \<.*\>$ ]]; then
-				# the name includes double quotes
-				sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
-				sender_name="$(echo "${EMAIL_SENDER}" | cut -d '"' -f 2)"
-			elif [[ ${EMAIL_SENDER} =~ ^\'.*\'\ \<.*\>$ ]]; then
-				# the name includes single quotes
-				sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
-				sender_name="$(echo "${EMAIL_SENDER}" | cut -d "'" -f 2)"
-			elif [[ ${EMAIL_SENDER} =~ ^.*\ \<.*\>$ ]]; then
-				# the name does not have any quotes
-				sender_email="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 2 | cut -d '>' -f 1)"
-				sender_name="$(echo "${EMAIL_SENDER}" | cut -d '<' -f 1)"
-			fi
-		fi
-
-		[ -n "${sender_email}" ] && opts+=(-f "${sender_email}")
-		[ -n "${sender_name}" ] && opts+=(-F "${sender_name}")
-
-		if [ "${debug}" = "1" ]; then
-			echo >&2 "--- BEGIN sendmail command ---"
-			printf >&2 "%q " "${sendmail}" -t "${opts[@]}"
-			echo >&2
-			echo >&2 "--- END sendmail command ---"
-		fi
-
-		"${sendmail}" -t "${opts[@]}"
-		ret=$?
-
-		if [ ${ret} -eq 0 ]; then
-			info "sent email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}'"
-			return 0
-		else
-			error "failed to send email notification for: ${host} ${chart}.${name} is ${status} to '${to_email}' with error code ${ret}."
-			return 1
-		fi
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# pushover sender
-
-send_pushover() {
-	local apptoken="${1}" usertokens="${2}" when="${3}" url="${4}" status="${5}" title="${6}" message="${7}" httpcode sent=0 user priority
-
-	if [ "${SEND_PUSHOVER}" = "YES" ] && [ -n "${apptoken}" ] && [ -n "${usertokens}" ] && [ -n "${title}" ] && [ -n "${message}" ]; then
-
-		# https://pushover.net/api
-		priority=-2
-		case "${status}" in
-		CLEAR) priority=-1 ;; # low priority: no sound or vibration
-		WARNING) priority=0 ;; # normal priority: respect quiet hours
-		CRITICAL) priority=1 ;; # high priority: bypass quiet hours
-		*) priority=-2 ;; # lowest priority: no notification at all
-		esac
-
-		for user in ${usertokens}; do
-			httpcode=$(docurl \
-				--form-string "token=${apptoken}" \
-				--form-string "user=${user}" \
-				--form-string "html=1" \
-				--form-string "title=${title}" \
-				--form-string "message=${message}" \
-				--form-string "timestamp=${when}" \
-				--form-string "url=${url}" \
-				--form-string "url_title=Open netdata dashboard to view the alarm" \
-				--form-string "priority=${priority}" \
-				https://api.pushover.net/1/messages.json)
-
-			if [ "${httpcode}" = "200" ]; then
-				info "sent pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send pushover notification for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# pushbullet sender
-
-send_pushbullet() {
-	local userapikey="${1}" source_device="${2}" recipients="${3}" url="${4}" title="${5}" message="${6}" httpcode sent=0 user
-	if [ "${SEND_PUSHBULLET}" = "YES" ] && [ -n "${userapikey}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
-		#https://docs.pushbullet.com/#create-push
-		for user in ${recipients}; do
-			httpcode=$(docurl \
-				--header 'Access-Token: '${userapikey}'' \
-				--header 'Content-Type: application/json' \
-				--data-binary @<(
-					cat <<EOF
-                              {"title": "${title}",
-                              "type": "link",
-                              "email": "${user}",
-                              "body": "$(echo -n ${message})",
-                              "url": "${url}",
-                              "source_device_iden": "${source_device}"}
-EOF
-				) "https://api.pushbullet.com/v2/pushes" -X POST)
-
-			if [ "${httpcode}" = "200" ]; then
-				info "sent pushbullet notification for: ${host} ${chart}.${name} is ${status} to '${user}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send pushbullet notification for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# kafka sender
-
-send_kafka() {
-	local httpcode sent=0
-	if [ "${SEND_KAFKA}" = "YES" ]; then
-		httpcode=$(docurl -X POST \
-			--data "{host_ip:\"${KAFKA_SENDER_IP}\",when:${when},name:\"${name}\",chart:\"${chart}\",family:\"${family}\",status:\"${status}\",old_status:\"${old_status}\",value:${value},old_value:${old_value},duration:${duration},non_clear_duration:${non_clear_duration},units:\"${units}\",info:\"${info}\"}" \
-			"${KAFKA_URL}")
-
-		if [ "${httpcode}" = "204" ]; then
-			info "sent kafka data for: ${host} ${chart}.${name} is ${status} and ip '${KAFKA_SENDER_IP}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send kafka data for: ${host} ${chart}.${name} is ${status} and ip '${KAFKA_SENDER_IP}' with HTTP error code ${httpcode}."
-		fi
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# pagerduty.com sender
-
-send_pd() {
-	local recipients="${1}" sent=0
-	unset t
-	case ${status} in
-	CLEAR) t='resolve' ;;
-	WARNING) t='trigger' ;;
-	CRITICAL) t='trigger' ;;
-	esac
-
-	if [ ${SEND_PD} = "YES" ] && [ -n "${t}" ]; then
-		for PD_SERVICE_KEY in ${recipients}; do
-			d="${status} ${name} = ${value_string} - ${host}, ${family}"
-			payload="$(
-				cat <<EOF
-            {
-              "service_key": "${PD_SERVICE_KEY}",
-              "event_type": "${t}",
-              "incident_key" : "${alarm_id}",
-              "description": "${d}",
-              "details": {
-                "value_w_units": "${value_string}",
-                "when": "${when}",
-                "duration" : "${duration}",
-                "roles": "${roles}",
-                "alarm_id" : "${alarm_id}",
-                "name" : "${name}",
-                "chart" : "${chart}",
-                "family" : "${family}",
-                "status" : "${status}",
-                "old_status" : "${old_status}",
-                "value" : "${value}",
-                "old_value" : "${old_value}",
-                "src" : "${src}",
-                "non_clear_duration" : "${non_clear_duration}",
-                "units" : "${units}",
-                "info" : "${info}"
-              }
-            }
-EOF
-			)"
-			httpcode=$(docurl -X POST --data "${payload}" "https://events.pagerduty.com/generic/2010-04-15/create_event.json")
-			if [ "${httpcode}" = "200" ]; then
-				info "sent pagerduty notification for: ${host} ${chart}.${name} is ${status}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send pagerduty notification for: ${host} ${chart}.${name} is ${status}, with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# twilio sender
-
-send_twilio() {
-	local accountsid="${1}" accounttoken="${2}" twilionumber="${3}" recipients="${4}" title="${5}" message="${6}" httpcode sent=0 user
-	if [ "${SEND_TWILIO}" = "YES" ] && [ -n "${accountsid}" ] && [ -n "${accounttoken}" ] && [ -n "${twilionumber}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
-		#https://www.twilio.com/packages/labs/code/bash/twilio-sms
-		for user in ${recipients}; do
-			httpcode=$(docurl -X POST \
-				--data-urlencode "From=${twilionumber}" \
-				--data-urlencode "To=${user}" \
-				--data-urlencode "Body=${title} ${message}" \
-				-u "${accountsid}:${accounttoken}" \
-				"https://api.twilio.com/2010-04-01/Accounts/${accountsid}/Messages.json")
-
-			if [ "${httpcode}" = "201" ]; then
-				info "sent Twilio SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send Twilio SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# hipchat sender
-
-send_hipchat() {
-	local authtoken="${1}" recipients="${2}" message="${3}" httpcode sent=0 room color msg_format notify
-
-	# remove <small></small> from the message
-	message="${message//<small>/}"
-	message="${message//<\/small>/}"
-
-	if [ "${SEND_HIPCHAT}" = "YES" ] && [ -n "${HIPCHAT_SERVER}" ] && [ -n "${authtoken}" ] && [ -n "${recipients}" ] && [ -n "${message}" ]; then
-		# Valid values: html, text.
-		# Defaults to 'html'.
-		msg_format="html"
-
-		# Background color for message. Valid values: yellow, green, red, purple, gray, random. Defaults to 'yellow'.
-		case "${status}" in
-		WARNING) color="yellow" ;;
-		CRITICAL) color="red" ;;
-		CLEAR) color="green" ;;
-		*) color="gray" ;;
-		esac
-
-		# Whether this message should trigger a user notification (change the tab color, play a sound, notify mobile phones, etc).
-		# Each recipient's notification preferences are taken into account.
-		# Defaults to false.
-		notify="true"
-
-		for room in ${recipients}; do
-			httpcode=$(docurl -X POST \
-				-H "Content-type: application/json" \
-				-H "Authorization: Bearer ${authtoken}" \
-				-d "{\"color\": \"${color}\", \"from\": \"${host}\", \"message_format\": \"${msg_format}\", \"message\": \"${message}\", \"notify\": \"${notify}\"}" \
-				"https://${HIPCHAT_SERVER}/v2/room/${room}/notification")
-
-			if [ "${httpcode}" = "204" ]; then
-				info "sent HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send HipChat notification for: ${host} ${chart}.${name} is ${status} to '${room}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# messagebird sender
-
-send_messagebird() {
-	local accesskey="${1}" messagebirdnumber="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user
-	if [ "${SEND_MESSAGEBIRD}" = "YES" ] && [ -n "${accesskey}" ] && [ -n "${messagebirdnumber}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
-		#https://developers.messagebird.com/docs/messaging
-		for user in ${recipients}; do
-			httpcode=$(docurl -X POST \
-				--data-urlencode "originator=${messagebirdnumber}" \
-				--data-urlencode "recipients=${user}" \
-				--data-urlencode "body=${title} ${message}" \
-				--data-urlencode "datacoding=auto" \
-				-H "Authorization: AccessKey ${accesskey}" \
-				"https://rest.messagebird.com/messages")
-
-			if [ "${httpcode}" = "201" ]; then
-				info "sent Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send Messagebird SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# kavenegar sender
-
-send_kavenegar() {
-	local API_KEY="${1}" kavenegarsender="${2}" recipients="${3}" title="${4}" message="${5}" httpcode sent=0 user
-	if [ "${SEND_KAVENEGAR}" = "YES" ] && [ -n "${API_KEY}" ] && [ -n "${kavenegarsender}" ] && [ -n "${recipients}" ] && [ -n "${message}" ] && [ -n "${title}" ]; then
-		# http://api.kavenegar.com/v1/{API-KEY}/sms/send.json
-		for user in ${recipients}; do
-			httpcode=$(docurl -X POST http://api.kavenegar.com/v1/${API_KEY}/sms/send.json \
-				--data-urlencode "sender=${kavenegarsender}" \
-				--data-urlencode "receptor=${user}" \
-				--data-urlencode "message=${title} ${message}")
-
-			if [ "${httpcode}" = "200" ]; then
-				info "sent Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send Kavenegar SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# telegram sender
-
-send_telegram() {
-	local bottoken="${1}" chatids="${2}" message="${3}" httpcode sent=0 chatid emoji disableNotification=""
-
-	if [ "${status}" = "CLEAR" ]; then disableNotification="--data-urlencode disable_notification=true"; fi
-
-	case "${status}" in
-	WARNING) emoji="⚠️" ;;
-	CRITICAL) emoji="🔴" ;;
-	CLEAR) emoji="✅" ;;
-	*) emoji="⚪️" ;;
-	esac
-
-	if [ "${SEND_TELEGRAM}" = "YES" ] && [ -n "${bottoken}" ] && [ -n "${chatids}" ] && [ -n "${message}" ]; then
-		for chatid in ${chatids}; do
-			# https://core.telegram.org/bots/api#sendmessage
-			httpcode=$(docurl ${disableNotification} \
-				--data-urlencode "parse_mode=HTML" \
-				--data-urlencode "disable_web_page_preview=true" \
-				--data-urlencode "text=${emoji} ${message}" \
-				"https://api.telegram.org/bot${bottoken}/sendMessage?chat_id=${chatid}")
-
-			if [ "${httpcode}" = "200" ]; then
-				info "sent telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}'"
-				sent=$((sent + 1))
-			elif [ "${httpcode}" = "401" ]; then
-				error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}': Wrong bot token."
-			else
-				error "failed to send telegram notification for: ${host} ${chart}.${name} is ${status} to '${chatid}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# Microsoft Team sender
-
-send_msteam() {
-
-	local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
-	[ "${SEND_MSTEAM}" != "YES" ] && return 1
-
-	case "${status}" in
-	WARNING) icon="${MSTEAM_ICON_WARNING}" && color="${MSTEAM_COLOR_WARNING}" ;;
-	CRITICAL) icon="${MSTEAM_ICON_CRITICAL}" && color="${MSTEAM_COLOR_CRITICAL}" ;;
-	CLEAR) icon="${MSTEAM_ICON_CLEAR}" && color="${MSTEAM_COLOR_CLEAR}" ;;
-	*) icon="${MSTEAM_ICON_DEFAULT}" && color="${MSTEAM_COLOR_DEFAULT}" ;;
-	esac
-
-	for channel in ${channels}; do
-		## More details are available here regarding the payload syntax options : https://docs.microsoft.com/en-us/outlook/actionable-messages/message-card-reference
-		## Online designer : https://acdesignerbeta.azurewebsites.net/
-		payload="$(
-			cat <<EOF
-        {
-            "@context": "http://schema.org/extensions",
-            "@type": "MessageCard",
-            "themeColor": "${color}",
-            "title": "$icon Alert ${status} from netdata for ${host}",
-            "text": "${host} ${status_message}, ${chart} (_${family}_), *${alarm}*",
-            "potentialAction": [
-            {
-                "@type": "OpenUri",
-                "name": "Netdata",
-                "targets": [
-                { "os": "default", "uri": "${goto_url}" }
-                ]
-            }
-            ]
-        }
-EOF
-		)"
-
-		# Replacing in the webhook CHANNEL string by the MS Teams channel name from conf file.
-		webhook="${webhook//CHANNEL/${channel}}"
-
-		httpcode=$(docurl -H "Content-Type: application/json" -d "${payload}" "${webhook}")
-
-		if [ "${httpcode}" = "200" ]; then
-			info "sent Microsoft team notification for: ${host} ${chart}.${name} is ${status} to '${webhook}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send Microsoft team notification for: ${host} ${chart}.${name} is ${status} to '${webhook}', with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# slack sender
-
-send_slack() {
-	local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
-	[ "${SEND_SLACK}" != "YES" ] && return 1
-
-	case "${status}" in
-	WARNING) color="warning" ;;
-	CRITICAL) color="danger" ;;
-	CLEAR) color="good" ;;
-	*) color="#777777" ;;
-	esac
-
-	for channel in ${channels}; do
-		# Default entry in the recipient is without a hash in front (backwards-compatible). Accept specification of channel or user.
-		if [ "${channel::1}" != "#" ] && [ "${channel::1}" != "@" ]; then channel="#$channel"; fi
-
-		# If channel is equal to "#" then do not send the channel attribute at all. Slack also defines channels and users in webhooks.
-		if [ "${channel}" = "#" ]; then
-			ch=""
-			chstr="without specifying a channel"
-		else
-			ch="\"channel\": \"${channel}\","
-			chstr="to '${channel}'"
-		fi
-
-		payload="$(
-			cat <<EOF
-        {
-            $ch
-            "username": "netdata on ${host}",
-            "icon_url": "${images_base_url}/images/banner-icon-144x144.png",
-            "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
-            "attachments": [
-                {
-                    "fallback": "${alarm} - ${chart} (${family}) - ${info}",
-                    "color": "${color}",
-                    "title": "${alarm}",
-                    "title_link": "${goto_url}",
-                    "text": "${info}",
-                    "fields": [
-                        {
-                            "title": "${chart}",
-                            "short": true
-                        },
-                        {
-                            "title": "${family}",
-                            "short": true
-                        }
-                    ],
-                    "thumb_url": "${image}",
-                    "footer": "by <${goto_url}|${host}>",
-                    "ts": ${when}
-                }
-            ]
-        }
-EOF
-		)"
-
-		httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
-		if [ "${httpcode}" = "200" ]; then
-			info "sent slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}"
-			sent=$((sent + 1))
-		else
-			error "failed to send slack notification for: ${host} ${chart}.${name} is ${status} ${chstr}, with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# rocketchat sender
-
-send_rocketchat() {
-	local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
-	[ "${SEND_ROCKETCHAT}" != "YES" ] && return 1
-
-	case "${status}" in
-	WARNING) color="warning" ;;
-	CRITICAL) color="danger" ;;
-	CLEAR) color="good" ;;
-	*) color="#777777" ;;
-	esac
-
-	for channel in ${channels}; do
-		payload="$(
-			cat <<EOF
-        {
-            "channel": "#${channel}",
-            "alias": "netdata on ${host}",
-            "avatar": "${images_base_url}/images/banner-icon-144x144.png",
-            "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
-            "attachments": [
-                {
-                    "color": "${color}",
-                    "title": "${alarm}",
-                    "title_link": "${goto_url}",
-                    "text": "${info}",
-                    "fields": [
-                        {
-                            "title": "${chart}",
-                            "short": true,
-                            "value": "chart"
-                        },
-                        {
-                            "title": "${family}",
-                            "short": true,
-                            "value": "family"
-                        }
-                    ],
-                    "thumb_url": "${image}",
-                    "ts": "${when}"
-                }
-            ]
-        }
-EOF
-		)"
-
-		httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
-		if [ "${httpcode}" = "200" ]; then
-			info "sent rocketchat notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send rocketchat notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# alerta sender
-
-send_alerta() {
-	local webhook="${1}" channels="${2}" httpcode sent=0 channel severity resource event payload auth
-
-	[ "${SEND_ALERTA}" != "YES" ] && return 1
-
-	case "${status}" in
-	CRITICAL) severity="critical" ;;
-	WARNING) severity="warning" ;;
-	CLEAR) severity="cleared" ;;
-	*) severity="indeterminate" ;;
-	esac
-
-	if [[ ${chart} == httpcheck* ]]; then
-		resource=$chart
-		event=$name
-	else
-		resource="${host}:${family}"
-		event="${chart}.${name}"
-	fi
-
-	for channel in ${channels}; do
-		payload="$(
-			cat <<EOF
-        {
-            "resource": "${resource}",
-            "event": "${event}",
-            "environment": "${channel}",
-            "severity": "${severity}",
-            "service": ["Netdata"],
-            "group": "Performance",
-            "value": "${value_string}",
-            "text": "${info}",
-            "tags": ["alarm_id:${alarm_id}"],
-            "attributes": {
-                "roles": "${roles}",
-                "name": "${name}",
-                "chart": "${chart}",
-                "family": "${family}",
-                "source": "${src}",
-                "moreInfo": "<a href=\"${goto_url}\">View Netdata</a>"
-            },
-            "origin": "netdata/${host}",
-            "type": "netdataAlarm",
-            "rawData": "${BASH_ARGV[@]}"
-        }
-EOF
-		)"
-
-		if [ -n "${ALERTA_API_KEY}" ]; then
-			auth="Key ${ALERTA_API_KEY}"
-		fi
-
-		httpcode=$(docurl -X POST "${webhook}/alert" -H "Content-Type: application/json" -H "Authorization: $auth" --data "${payload}")
-
-		if [ "${httpcode}" = "200" ] || [ "${httpcode}" = "201" ]; then
-			info "sent alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
-			sent=$((sent + 1))
-		elif [ "${httpcode}" = "202" ]; then
-			info "suppressed alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
-		else
-			error "failed to send alerta notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# flock sender
-
-send_flock() {
-	local webhook="${1}" channels="${2}" httpcode sent=0 channel color payload
-
-	[ "${SEND_FLOCK}" != "YES" ] && return 1
-
-	case "${status}" in
-	WARNING) color="warning" ;;
-	CRITICAL) color="danger" ;;
-	CLEAR) color="good" ;;
-	*) color="#777777" ;;
-	esac
-
-	for channel in ${channels}; do
-		httpcode=$(docurl -X POST "${webhook}" -H "Content-Type: application/json" -d "{
-            \"sendAs\": {
-                \"name\" : \"netdata on ${host}\",
-                \"profileImage\" : \"${images_base_url}/images/banner-icon-144x144.png\"
-            },
-            \"text\": \"${host} *${status_message}*\",
-            \"timestamp\": \"${when}\",
-            \"attachments\": [
-                {
-                    \"description\": \"${chart} (${family}) - ${info}\",
-                    \"color\": \"${color}\",
-                    \"title\": \"${alarm}\",
-                    \"url\": \"${goto_url}\",
-                    \"text\": \"${info}\",
-                    \"views\": {
-                        \"image\": {
-                            \"original\": { \"src\": \"${image}\", \"width\": 400, \"height\": 400 },
-                            \"thumbnail\": { \"src\": \"${image}\", \"width\": 50, \"height\": 50 },
-                            \"filename\": \"${image}\"
-                            }
-                    }
-                }
-            ]
-        }")
-		if [ "${httpcode}" = "200" ]; then
-			info "sent flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send flock notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# discord sender
-
-send_discord() {
-	local webhook="${1}/slack" channels="${2}" httpcode sent=0 channel color payload username
-
-	[ "${SEND_DISCORD}" != "YES" ] && return 1
-
-	case "${status}" in
-	WARNING) color="warning" ;;
-	CRITICAL) color="danger" ;;
-	CLEAR) color="good" ;;
-	*) color="#777777" ;;
-	esac
-
-	for channel in ${channels}; do
-		username="netdata on ${host}"
-		[ ${#username} -gt 32 ] && username="${username:0:29}..."
-
-		payload="$(
-			cat <<EOF
-        {
-            "channel": "#${channel}",
-            "username": "${username}",
-            "text": "${host} ${status_message}, \`${chart}\` (_${family}_), *${alarm}*",
-            "icon_url": "${images_base_url}/images/banner-icon-144x144.png",
-            "attachments": [
-                {
-                    "color": "${color}",
-                    "title": "${alarm}",
-                    "title_link": "${goto_url}",
-                    "text": "${info}",
-                    "fields": [
-                        {
-                            "title": "${chart}",
-                            "value": "${family}"
-                        }
-                    ],
-                    "thumb_url": "${image}",
-                    "footer_icon": "${images_base_url}/images/banner-icon-144x144.png",
-                    "footer": "${host}",
-                    "ts": ${when}
-                }
-            ]
-        }
-EOF
-		)"
-
-		httpcode=$(docurl -X POST --data-urlencode "payload=${payload}" "${webhook}")
-		if [ "${httpcode}" = "200" ]; then
-			info "sent discord notification for: ${host} ${chart}.${name} is ${status} to '${channel}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send discord notification for: ${host} ${chart}.${name} is ${status} to '${channel}', with HTTP error code ${httpcode}."
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# fleep sender
-
-send_fleep() {
-	local httpcode sent=0 webhooks="${1}" data message
-	if [ "${SEND_FLEEP}" = "YES" ]; then
-		message="${host} ${status_message}, \`${chart}\` (${family}), *${alarm}*\\n${info}"
-
-		for hook in ${webhooks}; do
-			data="{ "
-			data="${data} 'message': '${message}', "
-			data="${data} 'user': '${FLEEP_SENDER}' "
-			data="${data} }"
-
-			httpcode=$(docurl -X POST --data "${data}" "https://fleep.io/hook/${hook}")
-
-			if [ "${httpcode}" = "200" ]; then
-				info "sent fleep data for: ${host} ${chart}.${name} is ${status} and user '${FLEEP_SENDER}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send fleep data for: ${host} ${chart}.${name} is ${status} and user '${FLEEP_SENDER}' with HTTP error code ${httpcode}."
-			fi
-		done
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# Prowl sender
-
-send_prowl() {
-	local httpcode sent=0 data message keys prio=0 alarm_url event
-	if [ "${SEND_PROWL}" = "YES" ]; then
-		message="$(urlencode "${host} ${status_message}, \`${chart}\` (${family}), *${alarm}*\\n${info}")"
-		message="description=${message}"
-		keys="$(urlencode "$(echo "${1}" | tr ' ' ,)")"
-		keys="apikey=${keys}"
-		app="application=Netdata"
-
-		case "${status}" in
-		CRITICAL)
-			prio=2
-			;;
-		WARNING)
-			prio=1
-			;;
-		esac
-		prio="priority=${prio}"
-
-		alarm_url="$(urlencode ${goto_url})"
-		alarm_url="url=${alarm_url}"
-		event="$(urlencode "${host} ${status_message}")"
-		event="event=${event}"
-
-		data="${keys}&${prio}&${alarm_url}&${app}&${event}&${message}"
-
-		httpcode=$(docurl -X POST --data "${data}" "https://api.prowlapp.com/publicapi/add")
-
-		if [ "${httpcode}" = "200" ]; then
-			info "sent prowl data for: ${host} ${chart}.${name} is ${status}"
-			sent=1
-		else
-			error "failed to send prowl data for: ${host} ${chart}.${name} is ${status} with with error code ${httpcode}."
-		fi
-
-		[ ${sent} -gt 0 ] && return 0
-	fi
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# irc sender
-
-send_irc() {
-	local NICKNAME="${1}" REALNAME="${2}" CHANNELS="${3}" NETWORK="${4}" SERVERNAME="${5}" MESSAGE="${6}" sent=0 channel color send_alarm reply_codes error
-
-	if [ "${SEND_IRC}" = "YES" ] && [ -n "${NICKNAME}" ] && [ -n "${REALNAME}" ] && [ -n "${CHANNELS}" ] && [ -n "${NETWORK}" ] && [ -n "${SERVERNAME}" ]; then
-		case "${status}" in
-		WARNING) color="warning" ;;
-		CRITICAL) color="danger" ;;
-		CLEAR) color="good" ;;
-		*) color="#777777" ;;
-		esac
-
-		for CHANNEL in ${CHANNELS}; do
-			error=0
-			send_alarm=$(echo -e "USER ${NICKNAME} guest ${REALNAME} ${SERVERNAME}\\nNICK ${NICKNAME}\\nJOIN ${CHANNEL}\\nPRIVMSG ${CHANNEL} :${MESSAGE}\\nQUIT\\n" \  | nc "${NETWORK}" 6667)
-			reply_codes=$(echo "${send_alarm}" | cut -d ' ' -f 2 | grep -o '[0-9]*')
-			for code in ${reply_codes}; do
-				if [ "${code}" -ge 400 ] && [ "${code}" -le 599 ]; then
-					error=1
-					break
-				fi
-			done
-
-			if [ "${error}" -eq 0 ]; then
-				info "sent irc notification for: ${host} ${chart}.${name} is ${status} to '${CHANNEL}'"
-				sent=$((sent + 1))
-			else
-				error "failed to send irc notification for: ${host} ${chart}.${name} is ${status} to '${CHANNEL}', with error code ${code}."
-			fi
-		done
-	fi
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# Amazon SNS sender
-
-send_awssns() {
-	local targets="${1}" message='' sent=0 region=''
-	local default_format="${status} on ${host} at ${date}: ${chart} ${value_string}"
-
-	[ "${SEND_AWSSNS}" = "YES" ] || return 1
-
-	message=${AWSSNS_MESSAGE_FORMAT:-${default_format}}
-
-	for target in ${targets}; do
-		# Extract the region from the target ARN.  We need to explicitly specify the region so that it matches up correctly.
-		region="$(echo ${target} | cut -f 4 -d ':')"
-		if ${aws} sns publish --region "${region}" --subject "${host} ${status_message} - ${name//_/ } - ${chart}" --message "${message}" --target-arn ${target} &>/dev/null; then
-			info "sent Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'"
-			sent=$((sent + 1))
-		else
-			error "failed to send Amazon SNS notification for: ${host} ${chart}.${name} is ${status} to '${target}'"
-		fi
-	done
-
-	[ ${sent} -gt 0 ] && return 0
-
-	return 1
-}
-
-# -----------------------------------------------------------------------------
-# syslog sender
-
-send_syslog() {
-	local facility=${SYSLOG_FACILITY:-"local6"} level='info' targets="${1}"
-	local priority='' message='' host='' port='' prefix=''
-	local temp1='' temp2=''
-
-	[ "${SEND_SYSLOG}" = "YES" ] || return 1
-
-	if [ "${status}" = "CRITICAL" ]; then
-		level='crit'
-	elif [ "${status}" = "WARNING" ]; then
-		level='warning'
-	fi
-
-	for target in ${targets}; do
-		priority="${facility}.${level}"
-		message=''
-		host=''
-		port=''
-		prefix=''
-		temp1=''
-		temp2=''
-
-		prefix=$(echo ${target} | cut -d '/' -f 2)
-		temp1=$(echo ${target} | cut -d '/' -f 1)
-
-		if [ ${prefix} != ${temp1} ]; then
-			if (echo ${temp1} | grep -q '@'); then
-				temp2=$(echo ${temp1} | cut -d '@' -f 1)
-				host=$(echo ${temp1} | cut -d '@' -f 2)
-
-				if [ ${temp2} != ${host} ]; then
-					priority=${temp2}
-				fi
-
-				port=$(echo ${host} | rev | cut -d ':' -f 1 | rev)
-
-				if (echo ${host} | grep -E -q '\[.*\]'); then
-					if (echo ${port} | grep -q ']'); then
-						port=''
-					else
-						host=$(echo ${host} | rev | cut -d ':' -f 2- | rev)
-					fi
-				else
-					if [ ${port} = ${host} ]; then
-						port=''
-					else
-						host=$(echo ${host} | cut -d ':' -f 1)
-					fi
-				fi
-			else
-				priority=${temp1}
-			fi
-		fi
-
-		message="${prefix} ${status} on ${host} at ${date}: ${chart} ${value_string}"
-
-		if [ ${host} ]; then
-			logger_options="${logger_options} -n ${host}"
-			if [ ${port} ]; then
-				logger_options="${logger_options} -P ${port}"
-			fi
-		fi
-
-		${logger} -p ${priority} ${logger_options} "${message}"
-	done
-
-	return $?
-}
-
-# -----------------------------------------------------------------------------
-# prepare the content of the notification
-
-# the url to send the user on click
-urlencode "${args_host}" >/dev/null
-url_host="${REPLY}"
-urlencode "${chart}" >/dev/null
-url_chart="${REPLY}"
-urlencode "${family}" >/dev/null
-url_family="${REPLY}"
-urlencode "${name}" >/dev/null
-url_name="${REPLY}"
-
-redirect_params="host=${url_host}&chart=${url_chart}&family=${url_family}&alarm=${url_name}&alarm_unique_id=${unique_id}&alarm_id=${alarm_id}&alarm_event_id=${event_id}"
-GOTOCLOUD=0
-
-if [ "${NETDATA_REGISTRY_URL}" == "https://registry.my-netdata.io" ]; then
-	if [ -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then
-		if [ -f "/var/lib/netdata/registry/netdata.public.unique.id" ]; then
-			NETDATA_REGISTRY_UNIQUE_ID="$(cat "/var/lib/netdata/registry/netdata.public.unique.id")"
-		fi
-	fi
-	if [ ! -z "${NETDATA_REGISTRY_UNIQUE_ID}" ]; then
-		GOTOCLOUD=1
-	fi
-fi
-
-if [ ${GOTOCLOUD} -eq 0 ]; then
-	goto_url="${NETDATA_REGISTRY_URL}/goto-host-from-alarm.html?${redirect_params}"
-else
-	goto_url="https://netdata.cloud/alarms/redirect?agentID=${NETDATA_REGISTRY_UNIQUE_ID}&${redirect_params}"
-fi
-
-# the severity of the alarm
-severity="${status}"
-
-# the time the alarm was raised
-duration4human ${duration} >/dev/null
-duration_txt="${REPLY}"
-duration4human ${non_clear_duration} >/dev/null
-non_clear_duration_txt="${REPLY}"
-raised_for="(was ${old_status,,} for ${duration_txt})"
-
-# the key status message
-status_message="status unknown"
-
-# the color of the alarm
-color="grey"
-
-# the alarm value
-alarm="${name//_/ } = ${value_string}"
-
-# the image of the alarm
-image="${images_base_url}/images/banner-icon-144x144.png"
-
-# prepare the title based on status
-case "${status}" in
-CRITICAL)
-	image="${images_base_url}/images/alert-128-red.png"
-	status_message="is critical"
-	color="#ca414b"
-	;;
-
-WARNING)
-	image="${images_base_url}/images/alert-128-orange.png"
-	status_message="needs attention"
-	color="#ffc107"
-	;;
-
-CLEAR)
-	image="${images_base_url}/images/check-mark-2-128-green.png"
-	status_message="recovered"
-	color="#77ca6d"
-	;;
-esac
-
-if [ "${status}" = "CLEAR" ]; then
-	severity="Recovered from ${old_status}"
-	if [ ${non_clear_duration} -gt ${duration} ]; then
-		raised_for="(alarm was raised for ${non_clear_duration_txt})"
-	fi
-
-	# don't show the value when the status is CLEAR
-	# for certain alarms, this value might not have any meaning
-	alarm="${name//_/ } ${raised_for}"
-
-elif { [ "${old_status}" = "WARNING" ] && [ "${status}" = "CRITICAL" ]; }; then
-	severity="Escalated to ${status}"
-	if [ ${non_clear_duration} -gt ${duration} ]; then
-		raised_for="(alarm is raised for ${non_clear_duration_txt})"
-	fi
-
-elif { [ "${old_status}" = "CRITICAL" ] && [ "${status}" = "WARNING" ]; }; then
-	severity="Demoted to ${status}"
-	if [ ${non_clear_duration} -gt ${duration} ]; then
-		raised_for="(alarm is raised for ${non_clear_duration_txt})"
-	fi
-
-else
-	raised_for=
-fi
-
-# prepare HTML versions of elements
-info_html=
-[ -n "${info}" ] && info_html=" <small><br/>${info}</small>"
-
-raised_for_html=
-[ -n "${raised_for}" ] && raised_for_html="<br/><small>${raised_for}</small>"
-
-# -----------------------------------------------------------------------------
-# send the slack notification
-
-# slack aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_slack "${SLACK_WEBHOOK_URL}" "${to_slack}"
-SENT_SLACK=$?
-
-# -----------------------------------------------------------------------------
-# send the Microsoft notification
-
-# Microsoft team aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_msteam "${MSTEAM_WEBHOOK_URL}" "${to_msteam}"
-SENT_MSTEAM=$?
-
-# -----------------------------------------------------------------------------
-# send the rocketchat notification
-
-# rocketchat aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_rocketchat "${ROCKETCHAT_WEBHOOK_URL}" "${to_rocketchat}"
-SENT_ROCKETCHAT=$?
-
-# -----------------------------------------------------------------------------
-# send the alerta notification
-
-# alerta aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_alerta "${ALERTA_WEBHOOK_URL}" "${to_alerta}"
-SENT_ALERTA=$?
-
-# -----------------------------------------------------------------------------
-# send the flock notification
-
-# flock aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_flock "${FLOCK_WEBHOOK_URL}" "${to_flock}"
-SENT_FLOCK=$?
-
-# -----------------------------------------------------------------------------
-# send the discord notification
-
-# discord aggregates posts from the same username
-# so we use "${host} ${status}" as the bot username, to make them diff
-
-send_discord "${DISCORD_WEBHOOK_URL}" "${to_discord}"
-SENT_DISCORD=$?
-
-# -----------------------------------------------------------------------------
-# send the pushover notification
-
-send_pushover "${PUSHOVER_APP_TOKEN}" "${to_pushover}" "${when}" "${goto_url}" "${status}" "${host} ${status_message} - ${name//_/ } - ${chart}" "
-<font color=\"${color}\"><b>${alarm}</b></font>${info_html}<br/>&nbsp;
-<small><b>${chart}</b><br/>Chart<br/>&nbsp;</small>
-<small><b>${family}</b><br/>Family<br/>&nbsp;</small>
-<small><b>${severity}</b><br/>Severity<br/>&nbsp;</small>
-<small><b>${date}${raised_for_html}</b><br/>Time<br/>&nbsp;</small>
-<a href=\"${goto_url}\">View Netdata</a><br/>&nbsp;
-<small><small>The source of this alarm is line ${src}</small></small>
-"
-
-SENT_PUSHOVER=$?
-
-# -----------------------------------------------------------------------------
-# send the pushbullet notification
-
-send_pushbullet "${PUSHBULLET_ACCESS_TOKEN}" "${PUSHBULLET_SOURCE_DEVICE}" "${to_pushbullet}" "${goto_url}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}\\n
-Severity: ${severity}\\n
-Chart: ${chart}\\n
-Family: ${family}\\n
-$(date -d @${when})\\n
-The source of this alarm is line ${src}"
-
-SENT_PUSHBULLET=$?
-
-# -----------------------------------------------------------------------------
-# send the twilio SMS
-
-send_twilio "${TWILIO_ACCOUNT_SID}" "${TWILIO_ACCOUNT_TOKEN}" "${TWILIO_NUMBER}" "${to_twilio}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_TWILIO=$?
-
-# -----------------------------------------------------------------------------
-# send the messagebird SMS
-
-send_messagebird "${MESSAGEBIRD_ACCESS_KEY}" "${MESSAGEBIRD_NUMBER}" "${to_messagebird}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_MESSAGEBIRD=$?
-
-# -----------------------------------------------------------------------------
-# send the kavenegar SMS
-
-send_kavenegar "${KAVENEGAR_API_KEY}" "${KAVENEGAR_SENDER}" "${to_kavenegar}" "${host} ${status_message} - ${name//_/ } - ${chart}" "${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_KAVENEGAR=$?
-
-# -----------------------------------------------------------------------------
-# send the telegram.org message
-
-# https://core.telegram.org/bots/api#formatting-options
-send_telegram "${TELEGRAM_BOT_TOKEN}" "${to_telegram}" "${host} ${status_message} - <b>${name//_/ }</b>
-${chart} (${family})
-<a href=\"${goto_url}\">${alarm}</a>
-<i>${info}</i>"
-
-SENT_TELEGRAM=$?
-
-# -----------------------------------------------------------------------------
-# send the kafka message
-
-send_kafka
-SENT_KAFKA=$?
-
-# -----------------------------------------------------------------------------
-# send the pagerduty.com message
-
-send_pd "${to_pd}"
-SENT_PD=$?
-
-# -----------------------------------------------------------------------------
-# send the fleep message
-
-send_fleep "${to_fleep}"
-SENT_FLEEP=$?
-
-# -----------------------------------------------------------------------------
-# send the Prowl message
-
-send_prowl "${to_prowl}"
-SENT_PROWL=$?
-
-# -----------------------------------------------------------------------------
-# send the irc message
-
-send_irc "${IRC_NICKNAME}" "${IRC_REALNAME}" "${to_irc}" "${IRC_NETWORK}" "${host}" "${host} ${status_message} - ${name//_/ } - ${chart} ----- ${alarm}
-Severity: ${severity}
-Chart: ${chart}
-Family: ${family}
-${info}"
-
-SENT_IRC=$?
-
-# -----------------------------------------------------------------------------
-# send the custom message
-
-send_custom() {
-	# is it enabled?
-	[ "${SEND_CUSTOM}" != "YES" ] && return 1
-
-	# do we have any sender?
-	[ -z "${1}" ] && return 1
-
-	# call the custom_sender function
-	custom_sender "${@}"
-}
-
-send_custom "${to_custom}"
-SENT_CUSTOM=$?
-
-# -----------------------------------------------------------------------------
-# send hipchat message
-
-send_hipchat "${HIPCHAT_AUTH_TOKEN}" "${to_hipchat}" " \
-${host} ${status_message}<br/> \
-<b>${alarm}</b> ${info_html}<br/> \
-<b>${chart}</b> (family <b>${family}</b>)<br/> \
-<b>${date}${raised_for_html}</b><br/> \
-<a href=\\\"${goto_url}\\\">View netdata dashboard</a> \
-(source of alarm ${src}) \
-"
-
-SENT_HIPCHAT=$?
-
-# -----------------------------------------------------------------------------
-# send the Amazon SNS message
-
-send_awssns "${to_awssns}"
-
-SENT_AWSSNS=$?
-
-# -----------------------------------------------------------------------------
-# send the syslog message
-
-send_syslog "${to_syslog}"
-
-SENT_SYSLOG=$?
-
-# -----------------------------------------------------------------------------
-# send the email
-
-send_email <<EOF
-To: ${to_email}
-Subject: ${host} ${status_message} - ${name//_/ } - ${chart}
-MIME-Version: 1.0
-Content-Type: multipart/alternative; boundary="multipart-boundary"
-${email_thread_headers}
-
-This is a MIME-encoded multipart message
-
---multipart-boundary
-Content-Type: text/plain; encoding=${EMAIL_CHARSET}
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-
-${host} ${status_message}
-
-${alarm} ${info}
-${raised_for}
-
-Chart   : ${chart}
-Family  : ${family}
-Severity: ${severity}
-URL     : ${goto_url}
-Source  : ${src}
-Date    : ${date}
-Notification generated on ${host}
-
-Evaluated Expression :  ${calc_expression}
-Expression Variables :  ${calc_param_values}
-
-The host has ${total_warnings} WARNING and ${total_critical} CRITICAL alarm(s) raised.
-
---multipart-boundary
-Content-Type: text/html; encoding=${EMAIL_CHARSET}
-Content-Disposition: inline
-Content-Transfer-Encoding: 8bit
-
-<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-<html xmlns="http://www.w3.org/1999/xhtml" style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; box-sizing: border-box; font-size: 14px; margin: 0; padding: 0;">
-<body style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 14px; width: 100% !important; min-height: 100%; line-height: 1.6; background: #f6f6f6; margin:0; padding: 0;">
-<table>
-    <tbody>
-    <tr>
-        <td style="vertical-align: top;" valign="top"></td>
-        <td width="700" style="vertical-align: top; display: block !important; max-width: 700px !important; clear: both !important; margin: 0 auto; padding: 0;" valign="top">
-            <div style="max-width: 700px; display: block; margin: 0 auto; padding: 20px;">
-                <table width="100%" cellpadding="0" cellspacing="0" style="background: #fff; border: 1px solid #e9e9e9;">
-                    <tbody>
-                    <tr>
-                        <td bgcolor="#eee" style="padding: 5px 20px 5px 20px; background-color: #eee;">
-                            <div style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 20px; color: #777; font-weight: bold;">netdata notification</div>
-                        </td>
-                    </tr>
-                    <tr>
-                        <td bgcolor="${color}" style="font-size: 16px; vertical-align: top; font-weight: 400; text-align: center; margin: 0; padding: 10px; color: #ffffff; background: ${color} !important; border: 1px solid ${color}; border-top-color: ${color};" align="center" valign="top">
-                            <h1 style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-weight: 400; margin: 0;">${host} ${status_message}</h1>
-                        </td>
-                    </tr>
-                    <tr>
-                        <td style="vertical-align: top;" valign="top">
-                            <div style="margin: 0; padding: 20px; max-width: 700px;">
-                                <table width="100%" cellpadding="0" cellspacing="0" style="max-width:700px">
-                                    <tbody>
-                                    <tr>
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding:0 0 20px;" align="left" valign="top">
-                                            <span>${chart}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Chart</span>
-                                        </td>
-                                    </tr>
-                                    <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            <span><b>${alarm}</b>${info_html}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Alarm</span>
-                                        </td>
-                                    </tr>
-                                    <tr>
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            <span>${family}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Family</span>
-                                        </td>
-                                    </tr>
-                                    <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            <span>${severity}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Severity</span>
-                                        </td>
-                                    </tr>
-                                    <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top"><span>${date}</span>
-                                            <span>${raised_for_html}</span> <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Time</span>
-                                        </td>
-                                    </tr>
-                                    <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            <span>${calc_expression}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Evaluated Expression</span>
-                                        </td>
-                                    </tr>
-                                     <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            <span>${calc_param_values}</span>
-                                            <span style="display: block; color: #666666; font-size: 12px; font-weight: 300; line-height: 1; text-transform: uppercase;">Expression Variables</span>
-                                        </td>
-                                    </tr>
-                                     <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;" align="left" valign="top">
-                                            The host has ${total_warnings} WARNING and ${total_critical} CRITICAL alarm(s) raised.
-                                         </td>
-                                    </tr>
-
-                                    <tr style="margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 18px; vertical-align: top; margin: 0; padding: 0 0 20px;">
-                                            <a href="${goto_url}" style="font-size: 14px; color: #ffffff; text-decoration: none; line-height: 1.5; font-weight: bold; text-align: center; display: inline-block; text-transform: capitalize; background: #35568d; border-width: 1px; border-style: solid; border-color: #2b4c86; margin: 0; padding: 10px 15px;" target="_blank">View Netdata</a>
-                                        </td>
-                                    </tr>
-                                    <tr style="text-align: center; margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 11px; vertical-align: top; margin: 0; padding: 10px 0 0 0; color: #666666;" align="center" valign="bottom">The source of this alarm is line <code>${src}</code><br/>(alarms are configurable, edit this file to adapt the alarm to your needs)
-                                        </td>
-                                    </tr>
-                                    <tr style="text-align: center; margin: 0; padding: 0;">
-                                        <td style="font-family: 'Helvetica Neue', Helvetica, Arial, sans-serif; font-size: 12px; vertical-align: top; margin:0; padding: 20px 0 0 0; color: #666666; border-top: 1px solid #f0f0f0;" align="center" valign="bottom">Sent by
-                                            <a href="https://mynetdata.io/" target="_blank">netdata</a>, the real-time performance and health monitoring, on <code>${host}</code>.
-                                        </td>
-                                    </tr>
-                                    </tbody>
-                                </table>
-                            </div>
-                        </td>
-                    </tr>
-                    </tbody>
-                </table>
-            </div>
-        </td>
-    </tr>
-    </tbody>
-</table>
-</body>
-</html>
---multipart-boundary--
-EOF
-
-SENT_EMAIL=$?
-
-# -----------------------------------------------------------------------------
-# let netdata know
-for state in "${SENT_EMAIL}" \
-	"${SENT_PUSHOVER}" \
-	"${SENT_TELEGRAM}" \
-	"${SENT_SLACK}" \
-	"${SENT_ROCKETCHAT}" \
-	"${SENT_ALERTA}" \
-	"${SENT_FLOCK}" \
-	"${SENT_DISCORD}" \
-	"${SENT_TWILIO}" \
-	"${SENT_HIPCHAT}" \
-	"${SENT_MESSAGEBIRD}" \
-	"${SENT_KAVENEGAR}" \
-	"${SENT_PUSHBULLET}" \
-	"${SENT_KAFKA}" \
-	"${SENT_PD}" \
-	"${SENT_FLEEP}" \
-	"${SENT_PROWL}" \
-	"${SENT_CUSTOM}" \
-	"${SENT_IRC}" \
-	"${SENT_AWSSNS}" \
-	"${SENT_SYSLOG}" \
-	"${SENT_MSTEAM}"; do
-	if [ "${state}" -eq 0 ]; then
-		# we sent something
-		exit 0
-	fi
-done
-# we did not send anything
-exit 1
diff --git a/health/notifications/alarm-notify.sh.in b/health/notifications/alarm-notify.sh.in
index 0e215d4cb..763b1d224 100755
--- a/health/notifications/alarm-notify.sh.in
+++ b/health/notifications/alarm-notify.sh.in
@@ -165,6 +165,7 @@ kavenegar
 prowl
 awssns
 rocketchat
+sms
 "
 
 # -----------------------------------------------------------------------------
@@ -537,6 +538,14 @@ if [ "${SEND_PUSHOVER}" = "YES" ] ||
 	fi
 fi
 
+if [ "${SEND_SMS}" = "YES" ]; then
+	if [ -z "${sendsms}" ]; then
+		sendsms="$(command -v sendsms 2>/dev/null)"
+	fi
+	if [ -z "${sendsms}" ]; then
+		SEND_SMS="NO"
+	fi
+fi
 # if we need sendmail, check for the sendmail command
 if [ "${SEND_EMAIL}" = "YES" ] && [ -z "${sendmail}" ]; then
 	sendmail="$(command -v sendmail 2>/dev/null)"
@@ -649,6 +658,7 @@ for method in "${SEND_EMAIL}" \
 	"${SEND_IRC}" \
 	"${SEND_AWSSNS}" \
 	"${SEND_SYSLOG}" \
+	"${SEND_SMS}" \
 	"${SEND_MSTEAM}"; do
 	if [ "${method}" == "YES" ]; then
 		proceed=1
@@ -1242,7 +1252,7 @@ send_slack() {
                         }
                     ],
                     "thumb_url": "${image}",
-                    "footer": "by <${goto_url}|${host}>",
+                    "footer": "by ${host}",
                     "ts": ${when}
                 }
             ]
@@ -1727,6 +1737,36 @@ send_syslog() {
 }
 
 # -----------------------------------------------------------------------------
+# SMS sender
+
+send_sms() {
+	local recipients="${1}" exitcode sent=0
+
+    # Human readable SMS
+    local msg="${host} ${status_message}: ${chart} (${family}), ${alarm}"
+
+    # limit it to 160 characters
+    msg="${msg:0:160}"
+
+	if [ "${SEND_SMS}" = "YES" ] && [ -n "${sendsms}" ] && [ -n "${recipients}" ] && [ -n "${msg}" ]; then
+		# http://api.kavenegar.com/v1/{API-KEY}/sms/send.json
+		for phone in ${recipients}; do
+			exitcode=$($sendsms $phone "$msg")
+			if [ ${exitcode} -eq 0 ]; then
+				info "sent smstools3 SMS for: ${host} ${chart}.${name} is ${status} to '${user}'"
+				sent=$((sent + 1))
+			else
+				error "failed to send smstools3 SMS for: ${host} ${chart}.${name} is ${status} to '${user}' with error code ${exitcode}."
+			fi
+		done
+
+		[ ${sent} -gt 0 ] && return 0
+	fi
+
+	return 1
+}
+
+# -----------------------------------------------------------------------------
 # prepare the content of the notification
 
 # the url to send the user on click
@@ -1996,6 +2036,13 @@ ${info}"
 SENT_IRC=$?
 
 # -----------------------------------------------------------------------------
+# send the SMS message with smstools3
+
+send_sms "${to_sms}"
+
+SENT_SMS=$?
+
+# -----------------------------------------------------------------------------
 # send the custom message
 
 send_custom() {
@@ -2209,6 +2256,7 @@ for state in "${SENT_EMAIL}" \
 	"${SENT_IRC}" \
 	"${SENT_AWSSNS}" \
 	"${SENT_SYSLOG}" \
+	"${SENT_SMS}" \
 	"${SENT_MSTEAM}"; do
 	if [ "${state}" -eq 0 ]; then
 		# we sent something
diff --git a/health/notifications/custom/Makefile.inc b/health/notifications/custom/Makefile.inc
new file mode 100644
index 000000000..ed83b9f52
--- /dev/null
+++ b/health/notifications/custom/Makefile.inc
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# THIS IS NOT A COMPLETE Makefile
+# IT IS INCLUDED BY ITS PARENT'S Makefile.am
+# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
+
+# install these files
+dist_noinst_DATA += \
+	custom/README.md \
+	custom/Makefile.inc \
+	$(NULL)
+
diff --git a/health/notifications/custom/README.md b/health/notifications/custom/README.md
new file mode 100644
index 000000000..a93005513
--- /dev/null
+++ b/health/notifications/custom/README.md
@@ -0,0 +1,51 @@
+# Custom
+
+Netdata allows you to send custom notifications, to any endpoint you choose.
+To configure custom notifications, you will need to define the `custom_sender()` function in `health_alarm_notify.conf` 
+You can look at the other senders in `/usr/libexec/netdata/plugins.d/alarm-notify.sh` for examples.
+As with other notifications, you will also need to define the recipient list in `DEFAULT_RECIPIENT_CUSTOM` and/or the `role_recipients_custom` array.
+
+Variables available to the custom_sender:
+
+ - ${to_custom}          the list of recipients for the alarm
+ - ${host}               the host generated this event
+ - ${url_host}           same as ${host} but URL encoded
+ - ${unique_id}          the unique id of this event
+ - ${alarm_id}           the unique id of the alarm that generated this event
+ - ${event_id}           the incremental id of the event, for this alarm id
+ - ${when}               the timestamp this event occurred
+ - ${name}               the name of the alarm, as given in netdata health.d entries
+ - ${url_name}           same as ${name} but URL encoded
+ - ${chart}              the name of the chart (type.id)
+ - ${url_chart}          same as ${chart} but URL encoded
+ - ${family}             the family of the chart
+ - ${url_family}         same as ${family} but URL encoded
+ - ${status}             the current status : REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
+ - ${old_status}         the previous status: REMOVED, UNINITIALIZED, UNDEFINED, CLEAR, WARNING, CRITICAL
+ - ${value}              the current value of the alarm
+ - ${old_value}          the previous value of the alarm
+ - ${src}                the line number and file the alarm has been configured
+ - ${duration}           the duration in seconds of the previous alarm state
+ - ${duration_txt}       same as ${duration} for humans
+ - ${non_clear_duration} the total duration in seconds this is/was non-clear
+ - ${non_clear_duration_txt} same as ${non_clear_duration} for humans
+ - ${units}              the units of the value
+ - ${info}               a short description of the alarm
+ - ${value_string}       friendly value (with units)
+ - ${old_value_string}   friendly old value (with units)
+ - ${image}              the URL of an image to represent the status of the alarm
+ - ${color}              a color in #AABBCC format for the alarm
+ - ${goto_url}           the URL the user can click to see the netdata dashboard
+ - ${calc_expression}    the expression evaluated to provide the value for the alarm
+ - ${calc_param_values}  the value of the variables in the evaluated expression
+ - ${total_warnings}     the total number of alarms in WARNING state on the host
+ - ${total_critical}     the total number of alarms in CRITICAL state on the host
+
+The following are more human friendly:
+
+ - ${alarm}              like "name = value units"
+ - ${status_message}     like "needs attention", "recovered", "is critical"
+ - ${severity}           like "Escalated to CRITICAL", "Recovered from WARNING"
+ - ${raised_for}         like "(alarm was raised for 10 minutes)"
+
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fhealth%2Fnotifications%2Fcustom%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
diff --git a/health/notifications/health_alarm_notify.conf b/health/notifications/health_alarm_notify.conf
index b96cf5793..551b963f7 100755
--- a/health/notifications/health_alarm_notify.conf
+++ b/health/notifications/health_alarm_notify.conf
@@ -13,6 +13,7 @@
 # - messages to your telegram chat / group chat (telegram.org)
 # - sms messages to your cell phone or any sms enabled device (twilio.com)
 # - sms messages to your cell phone or any sms enabled device (messagebird.com)
+# - sms messages to your cell phone or any sms enabled device (smstools3)
 # - notifications to users on pagerduty.com
 # - push notifications to iOS devices (via prowlapp.com)
 # - notifications to Amazon SNS topics (aws.amazon.com)
@@ -110,6 +111,11 @@ logger=""
 # If not found, Amazon SNS notifications will be silently disabled.
 aws=""
 
+# The full path of the sendsms command (smstools3).
+# If empty, the system $PATH will be searched for it.
+# If not found, SMS notifications will be silently disabled.
+sendsms=""
+
 #------------------------------------------------------------------------------
 # extra options for external commands
 #
@@ -693,6 +699,18 @@ AWSSNS_MESSAGE_FORMAT="${status} on ${host} at ${date}: ${chart} ${value_string}
 DEFAULT_RECIPIENT_AWSSNS=""
 
 #------------------------------------------------------------------------------
+# SMS Server Tools 3 (smstools3) global notification options
+
+# enable/disable sending SMS Server Tools 3 SMS notifications
+SEND_SMS="YES"
+
+# if a role's recipients are not configured, a notification will be sent to
+# this SMS channel (empty = do not send a notification for unconfigured
+# roles). Multiple recipients can be given like this: "PHONE1 PHONE2 ..."
+
+DEFAULT_RECIPIENT_SMS=""
+
+#------------------------------------------------------------------------------
 # custom notifications
 #
 
@@ -734,6 +752,10 @@ custom_sender() {
     # ${image}              the URL of an image to represent the status of the alarm
     # ${color}              a color in #AABBCC format for the alarm
     # ${goto_url}           the URL the user can click to see the netdata dashboard
+    # ${calc_expression}    the expression evaluated to provide the value for the alarm
+    # ${calc_param_values}  the value of the variables in the evaluated expression
+    # ${total_warnings}     the total number of alarms in WARNING state on the host
+    # ${total_critical}     the total number of alarms in CRITICAL state on the host
 
     # these are more human friendly:
     # ${alarm}              like "name = value units"
@@ -844,6 +866,8 @@ role_recipients_custom[domainadmin]="${DEFAULT_RECIPIENT_CUSTOM}"
 
 role_recipients_msteam[domainadmin]="${DEFAULT_RECIPIENT_MSTEAM}"
 
+role_recipients_sms[domainadmin]="${DEFAULT_RECIPIENT_SMS}"
+
 # -----------------------------------------------------------------------------
 # database servers alarms
 # mysql, redis, memcached, postgres, etc
@@ -888,6 +912,8 @@ role_recipients_custom[dba]="${DEFAULT_RECIPIENT_CUSTOM}"
 
 role_recipients_msteam[dba]="${DEFAULT_RECIPIENT_MSTEAM}"
 
+role_recipients_sms[dba]="${DEFAULT_RECIPIENT_SMS}"
+
 # -----------------------------------------------------------------------------
 # web servers alarms
 # apache, nginx, lighttpd, etc
@@ -932,6 +958,8 @@ role_recipients_custom[webmaster]="${DEFAULT_RECIPIENT_CUSTOM}"
 
 role_recipients_msteam[webmaster]="${DEFAULT_RECIPIENT_MSTEAM}"
 
+role_recipients_sms[webmaster]="${DEFAULT_RECIPIENT_SMS}"
+
 # -----------------------------------------------------------------------------
 # proxy servers alarms
 # squid, etc
@@ -976,6 +1004,8 @@ role_recipients_custom[proxyadmin]="${DEFAULT_RECIPIENT_CUSTOM}"
 
 role_recipients_msteam[proxyadmin]="${DEFAULT_RECIPIENT_MSTEAM}"
 
+role_recipients_sms[proxyadmin]="${DEFAULT_RECIPIENT_SMS}"
+
 # -----------------------------------------------------------------------------
 # peripheral devices
 # UPS, photovoltaics, etc
@@ -1017,3 +1047,5 @@ role_recipients_awssns[sitemgr]="${DEFAULT_RECIPIENT_AWSSNS}"
 role_recipients_custom[sitemgr]="${DEFAULT_RECIPIENT_CUSTOM}"
 
 role_recipients_msteam[sitemgr]="${DEFAULT_RECIPIENT_MSTEAM}"
+
+role_recipients_sms[sitemgr]="${DEFAULT_RECIPIENT_SMS}"
diff --git a/health/notifications/prowl/Makefile.inc b/health/notifications/prowl/Makefile.inc
new file mode 100644
index 000000000..08e4c2e54
--- /dev/null
+++ b/health/notifications/prowl/Makefile.inc
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# THIS IS NOT A COMPLETE Makefile
+# IT IS INCLUDED BY ITS PARENT'S Makefile.am
+# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
+
+# install these files
+dist_noinst_DATA += \
+	prowl/README.md \
+	prowl/Makefile.inc \
+	$(NULL)
+
diff --git a/health/notifications/prowl/README.md b/health/notifications/prowl/README.md
new file mode 100644
index 000000000..1f060edcf
--- /dev/null
+++ b/health/notifications/prowl/README.md
@@ -0,0 +1,22 @@
+# prowl
+
+(Prowl)[1] is a push notification service for iOS devices.  Netdata
+supprots delivering notifications to iOS devices through Prowl.
+
+Because of how Netdata integrates with Prowl, there is a hard limit of
+at most 1000 notifications per hour (starting from the first notification
+sent).  Any alerts beyond the first thousand in an hour will be dropped.
+
+Warning messages will be sent with the 'High' priority, critical messages
+will be sent with the 'Emergency' priority, and all other messages will
+be sent with the normal priority.  Opening the notification's associated
+URL will take you to the Netdata dashboard of the system that issued
+the alert, directly to the chart that it triggered on.
+
+## configuration
+
+To use this, you will need a Prowl API key, which can be rquested through
+the Prowl website after registering.
+
+Once you have an API key, simply specify that as a recipient for Prowl
+notifications.
diff --git a/health/notifications/smstools3/Makefile.inc b/health/notifications/smstools3/Makefile.inc
new file mode 100644
index 000000000..b2d424eaf
--- /dev/null
+++ b/health/notifications/smstools3/Makefile.inc
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# THIS IS NOT A COMPLETE Makefile
+# IT IS INCLUDED BY ITS PARENT'S Makefile.am
+# IT IS REQUIRED TO REFERENCE ALL FILES RELATIVE TO THE PARENT
+
+# install these files
+dist_noinst_DATA += \
+	smstools3/README.md \
+	smstools3/Makefile.inc \
+	$(NULL)
+
diff --git a/health/notifications/smstools3/README.md b/health/notifications/smstools3/README.md
new file mode 100644
index 000000000..71e13dc19
--- /dev/null
+++ b/health/notifications/smstools3/README.md
@@ -0,0 +1,32 @@
+# SMS Server Tools 3
+
+The [SMS Server Tools 3](http://smstools3.kekekasvi.com/) is a SMS Gateway software which can send and receive short messages through GSM modems and mobile phones.
+
+To have netdata send notifications via SMS Server Tools 3, you'll first need to [install](http://smstools3.kekekasvi.com/index.php?p=compiling) and [configure](http://smstools3.kekekasvi.com/index.php?p=configure) smsd.
+
+You then just need to configure the recipient phone numbers in `health_alarm_notify.conf`:
+
+```sh
+#------------------------------------------------------------------------------
+# SMS Server Tools 3 (smstools3) global notification options
+
+# enable/disable sending SMS Server Tools 3 SMS notifications
+SEND_SMS="YES"
+
+# if a role's recipients are not configured, a notification will be sent to
+# this SMS channel (empty = do not send a notification for unconfigured
+# roles). Multiple recipients can be given like this: "PHONE1 PHONE2 ..."
+
+DEFAULT_RECIPIENT_SMS=""
+```
+
+Netdata uses the script `sendsms` that is installed by `smstools3` and just passes a phone number and a message to it. If `sendsms` is not in `$PATH`, you can pass its location in `health_alarm_notify.conf`:
+
+```sh
+# The full path of the sendsms command (smstools3).
+# If empty, the system $PATH will be searched for it.
+# If not found, SMS notifications will be silently disabled.
+sendsms=""
+```
+
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fhealth%2Fnotifications%2Fsmstools3%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()