Adding upstream version 1.14.0~rc0.upstream/1.14.0_rc0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 159 insertions, 280 deletions

diff --git a/packaging/installer/functions.sh b/packaging/installer/functions.sh
index 0d0450842..7016b4f34 100644
--- a/packaging/installer/functions.sh
+++ b/packaging/installer/functions.sh
@@ -6,19 +6,6 @@
 [ -z "${UID}" ] && UID="$(id -u)"
 
 # -----------------------------------------------------------------------------
-# checking the availability of commands
-
-which_cmd() {
-	# shellcheck disable=SC2230
-	which "${1}" 2>/dev/null || command -v "${1}" 2>/dev/null
-}
-
-check_cmd() {
-	which_cmd "${1}" >/dev/null 2>&1 && return 0
-	return 1
-}
-
-# -----------------------------------------------------------------------------
 
 setup_terminal() {
 	TPUT_RESET=""
@@ -50,7 +37,7 @@ setup_terminal() {
 	# Is stderr on the terminal? If not, then fail
 	test -t 2 || return 1
 
-	if check_cmd tput; then
+	if command -v tput 1>/dev/null 2>&1; then
 		if [ $(($(tput colors 2>/dev/null))) -ge 8 ]; then
 			# Enable colors
 			TPUT_RESET="$(tput sgr 0)"
@@ -117,19 +104,20 @@ netdata_banner() {
 # -----------------------------------------------------------------------------
 # portable service command
 
-service_cmd="$(which_cmd service)"
-rcservice_cmd="$(which_cmd rc-service)"
-systemctl_cmd="$(which_cmd systemctl)"
+service_cmd="$(command -v service 2>/dev/null)"
+rcservice_cmd="$(command -v rc-service 2>/dev/null)"
+systemctl_cmd="$(command -v systemctl 2>/dev/null)"
 service() {
+
 	local cmd="${1}" action="${2}"
 
-	if [ ! -z "${systemctl_cmd}" ]; then
+	if [ -n "${systemctl_cmd}" ]; then
 		run "${systemctl_cmd}" "${action}" "${cmd}"
 		return $?
-	elif [ ! -z "${service_cmd}" ]; then
+	elif [ -n "${service_cmd}" ]; then
 		run "${service_cmd}" "${cmd}" "${action}"
 		return $?
-	elif [ ! -z "${rcservice_cmd}" ]; then
+	elif [ -n "${rcservice_cmd}" ]; then
 		run "${rcservice_cmd}" "${cmd}" "${action}"
 		return $?
 	fi
@@ -139,9 +127,9 @@ service() {
 # -----------------------------------------------------------------------------
 # portable pidof
 
-pidof_cmd="$(which_cmd pidof)"
-pidof() {
-	if [ ! -z "${pidof_cmd}" ]; then
+safe_pidof() {
+	local pidof_cmd="$(command -v pidof 2>/dev/null)"
+	if [ -n "${pidof_cmd}" ]; then
 		${pidof_cmd} "${@}"
 		return $?
 	else
@@ -154,39 +142,21 @@ pidof() {
 }
 
 # -----------------------------------------------------------------------------
-# portable delete recursively interactively
-
-portable_deletedir_recursively_interactively() {
-	if [ ! -z "$1" -a -d "$1" ]; then
-		if [ "$(uname -s)" = "Darwin" ]; then
-			echo >&2
-			read >&2 -p "Press ENTER to recursively delete directory '$1' > "
-			echo >&2 "Deleting directory '$1' ..."
-			run rm -R "$1"
-		else
-			echo >&2
-			echo >&2 "Deleting directory '$1' ..."
-			run rm -I -R "$1"
-		fi
-	else
-		echo "Directory '$1' does not exist."
-	fi
-}
-
-# -----------------------------------------------------------------------------
-
-export SYSTEM_CPUS=1
-portable_find_processors() {
+find_processors() {
+	local cpus
 	if [ -f "/proc/cpuinfo" ]; then
 		# linux
-		SYSTEM_CPUS=$(grep -c ^processor /proc/cpuinfo)
+		cpus=$(grep -c ^processor /proc/cpuinfo)
 	else
 		# freebsd
-		SYSTEM_CPUS=$(sysctl hw.ncpu 2>/dev/null | grep ^hw.ncpu | cut -d ' ' -f 2)
+		cpus=$(sysctl hw.ncpu 2>/dev/null | grep ^hw.ncpu | cut -d ' ' -f 2)
+	fi
+	if [ -z "${cpus}" ] || [ $((cpus)) -lt 1 ]; then
+		echo 1
+	else
+		echo "${cpus}"
 	fi
-	[ -z "${SYSTEM_CPUS}" -o $((SYSTEM_CPUS)) -lt 1 ] && SYSTEM_CPUS=1
 }
-portable_find_processors
 
 # -----------------------------------------------------------------------------
 fatal() {
@@ -248,145 +218,10 @@ run() {
 	return ${ret}
 }
 
-getent_cmd="$(which_cmd getent)"
-portable_check_user_exists() {
-	local username="${1}" found=
-
-	if [ ! -z "${getent_cmd}" ]; then
-		"${getent_cmd}" passwd "${username}" >/dev/null 2>&1
-		return $?
-	fi
-
-	found="$(cut -d ':' -f 1 </etc/passwd | grep "^${username}$")"
-	[ "${found}" = "${username}" ] && return 0
-	return 1
-}
-
-portable_check_group_exists() {
-	local groupname="${1}" found=
-
-	if [ ! -z "${getent_cmd}" ]; then
-		"${getent_cmd}" group "${groupname}" >/dev/null 2>&1
-		return $?
-	fi
-
-	found="$(cut -d ':' -f 1 </etc/group | grep "^${groupname}$")"
-	[ "${found}" = "${groupname}" ] && return 0
-	return 1
-}
-
-portable_check_user_in_group() {
-	local username="${1}" groupname="${2}" users=
-
-	if [ ! -z "${getent_cmd}" ]; then
-		users="$(getent group "${groupname}" | cut -d ':' -f 4)"
-	else
-		users="$(grep "^${groupname}:" </etc/group | cut -d ':' -f 4)"
-	fi
-
-	[[ ",${users}," =~ ,${username}, ]] && return 0
-	return 1
-}
-
-portable_add_user() {
-	local username="${1}" homedir="${2}"
-
-	[ -z "${homedir}" ] && homedir="/tmp"
-
-	portable_check_user_exists "${username}"
-	[ $? -eq 0 ] && echo >&2 "User '${username}' already exists." && return 0
-
-	echo >&2 "Adding ${username} user account with home ${homedir} ..."
-
-	# shellcheck disable=SC2230
-	local nologin="$(which nologin 2>/dev/null || command -v nologin 2>/dev/null || echo '/bin/false')"
-
-	# Linux
-	if check_cmd useradd; then
-		run useradd -r -g "${username}" -c "${username}" -s "${nologin}" --no-create-home -d "${homedir}" "${username}" && return 0
-	fi
-
-	# FreeBSD
-	if check_cmd pw; then
-		run pw useradd "${username}" -d "${homedir}" -g "${username}" -s "${nologin}" && return 0
-	fi
-
-	# BusyBox
-	if check_cmd adduser; then
-		run adduser -h "${homedir}" -s "${nologin}" -D -G "${username}" "${username}" && return 0
-	fi
-
-	echo >&2 "Failed to add ${username} user account !"
-
-	return 1
-}
-
-portable_add_group() {
-	local groupname="${1}"
-
-	portable_check_group_exists "${groupname}"
-	[ $? -eq 0 ] && echo >&2 "Group '${groupname}' already exists." && return 0
-
-	echo >&2 "Adding ${groupname} user group ..."
-
-	# Linux
-	if check_cmd groupadd; then
-		run groupadd -r "${groupname}" && return 0
-	fi
-
-	# FreeBSD
-	if check_cmd pw; then
-		run pw groupadd "${groupname}" && return 0
-	fi
-
-	# BusyBox
-	if check_cmd addgroup; then
-		run addgroup "${groupname}" && return 0
-	fi
-
-	echo >&2 "Failed to add ${groupname} user group !"
-	return 1
-}
-
-portable_add_user_to_group() {
-	local groupname="${1}" username="${2}"
-
-	portable_check_group_exists "${groupname}"
-	[ $? -ne 0 ] && echo >&2 "Group '${groupname}' does not exist." && return 1
-
-	# find the user is already in the group
-	if portable_check_user_in_group "${username}" "${groupname}"; then
-		# username is already there
-		echo >&2 "User '${username}' is already in group '${groupname}'."
-		return 0
-	else
-		# username is not in group
-		echo >&2 "Adding ${username} user to the ${groupname} group ..."
-
-		# Linux
-		if check_cmd usermod; then
-			run usermod -a -G "${groupname}" "${username}" && return 0
-		fi
-
-		# FreeBSD
-		if check_cmd pw; then
-			run pw groupmod "${groupname}" -m "${username}" && return 0
-		fi
-
-		# BusyBox
-		if check_cmd addgroup; then
-			run addgroup "${username}" "${groupname}" && return 0
-		fi
-
-		echo >&2 "Failed to add user ${username} to group ${groupname} !"
-		return 1
-	fi
-}
-
 iscontainer() {
 	# man systemd-detect-virt
-	local cmd=$(which_cmd systemd-detect-virt)
-	if [ ! -z "${cmd}" -a -x "${cmd}" ]; then
+	local cmd=$(command -v systemd-detect-virt 2>/dev/null)
+	if [ -n "${cmd}" ] && [ -x "${cmd}" ]; then
 		"${cmd}" --container >/dev/null 2>&1 && return 0
 	fi
 
@@ -394,15 +229,15 @@ iscontainer() {
 	# http://stackoverflow.com/a/37016302
 	local pid=$(cat /proc/1/sched 2>/dev/null | head -n 1 | {
 		IFS='(),#:' read name pid th threads
-		echo $pid
+		echo "$pid"
 	})
-	if [ ! -z "${pid}" ]; then
+	if [ -n "${pid}" ]; then
 		pid=$(( pid + 0 ))
 		[ ${pid} -gt 1 ] && return 0
 	fi
 
 	# lxc sets environment variable 'container'
-	[ ! -z "${container}" ] && return 0
+	[ -n "${container}" ] && return 0
 
 	# docker creates /.dockerenv
 	# http://stackoverflow.com/a/25518345
@@ -425,23 +260,23 @@ issystemd() {
 
 	# if there is no systemctl command, it is not systemd
 	# shellcheck disable=SC2230
-	systemctl=$(which systemctl 2>/dev/null || command -v systemctl 2>/dev/null)
+	systemctl=$(command -v systemctl 2>/dev/null)
 	[ -z "${systemctl}" -o ! -x "${systemctl}" ] && return 1
 
 	# if pid 1 is systemd, it is systemd
 	[ "$(basename $(readlink /proc/1/exe) 2>/dev/null)" = "systemd" ] && return 0
 
 	# if systemd is not running, it is not systemd
-	pids=$(pidof systemd 2>/dev/null)
+	pids=$(safe_pidof systemd 2>/dev/null)
 	[ -z "${pids}" ] && return 1
 
 	# check if the running systemd processes are not in our namespace
 	myns="$(readlink /proc/self/ns/pid 2>/dev/null)"
 	for p in ${pids}; do
-		ns="$(readlink /proc/${p}/ns/pid 2>/dev/null)"
+		ns="$(readlink "/proc/${p}/ns/pid" 2>/dev/null)"
 
 		# if pid of systemd is in our namespace, it is systemd
-		[ ! -z "${myns}" ] && [ "${myns}" = "${ns}" ] && return 0
+		[ -n "${myns}" ] && [ "${myns}" = "${ns}" ] && return 0
 	done
 
 	# else, it is not systemd
@@ -460,7 +295,7 @@ install_non_systemd_init() {
 		key=$(</etc/redhat-release)
 	fi
 
-	if [ -d /etc/init.d -a ! -f /etc/init.d/netdata ]; then
+	if [ -d /etc/init.d ] && [ ! -f /etc/init.d/netdata ]; then
 		if [[ ${key} =~ ^(gentoo|alpine).* ]]; then
 			echo >&2 "Installing OpenRC init file..."
 			run cp system/netdata-openrc /etc/init.d/netdata &&
@@ -468,10 +303,7 @@ install_non_systemd_init() {
 				run rc-update add netdata default &&
 				return 0
 
-		elif [ "${key}" = "debian-7" \
-			-o "${key}" = "ubuntu-12.04" \
-			-o "${key}" = "ubuntu-14.04" \
-			]; then
+		elif [ "${key}" = "debian-7" ] || [ "${key}" = "ubuntu-12.04" ] || [ "${key}" = "ubuntu-14.04" ]; then
 			echo >&2 "Installing LSB init file..."
 			run cp system/netdata-lsb /etc/init.d/netdata &&
 				run chmod 755 /etc/init.d/netdata &&
@@ -551,10 +383,10 @@ install_netdata_service() {
 			local ret=$?
 
 			if [ ${ret} -eq 0 ]; then
-				if [ ! -z "${service_cmd}" ]; then
+				if [ -n "${service_cmd}" ]; then
 					NETDATA_START_CMD="service netdata start"
 					NETDATA_STOP_CMD="service netdata stop"
-				elif [ ! -z "${rcservice_cmd}" ]; then
+				elif [ -n "${rcservice_cmd}" ]; then
 					NETDATA_START_CMD="rc-service netdata start"
 					NETDATA_STOP_CMD="rc-service netdata stop"
 				fi
@@ -582,10 +414,10 @@ pidisnetdata() {
 stop_netdata_on_pid() {
 	local pid="${1}" ret=0 count=0
 
-	pidisnetdata ${pid} || return 0
+	pidisnetdata "${pid}" || return 0
 
-	printf >&2 "Stopping netdata on pid ${pid} ..."
-	while [ ! -z "$pid" -a ${ret} -eq 0 ]; do
+	printf >&2 "Stopping netdata on pid %s ..." "${pid}"
+	while [ -n "$pid" ] && [ ${ret} -eq 0 ]; do
 		if [ ${count} -gt 45 ]; then
 			echo >&2 "Cannot stop the running netdata on pid ${pid}."
 			return 1
@@ -593,7 +425,7 @@ stop_netdata_on_pid() {
 
 		count=$((count + 1))
 
-		run kill ${pid} 2>/dev/null
+		run kill "${pid}" 2>/dev/null
 		ret=$?
 
 		test ${ret} -eq 0 && printf >&2 "." && sleep 2
@@ -619,11 +451,11 @@ netdata_pids() {
 	for p in \
 		$(cat /var/run/netdata.pid 2>/dev/null) \
 		$(cat /var/run/netdata/netdata.pid 2>/dev/null) \
-		$(pidof netdata 2>/dev/null); do
-		ns="$(readlink /proc/${p}/ns/pid 2>/dev/null)"
+		$(safe_pidof netdata 2>/dev/null); do
+		ns="$(readlink "/proc/${p}/ns/pid" 2>/dev/null)"
 
-		if [ -z "${myns}" -o -z "${ns}" -o "${myns}" = "${ns}" ]; then
-			pidisnetdata ${p} && echo "${p}"
+		if [ -z "${myns}" ] || [ -z "${ns}" ] || [ "${myns}" = "${ns}" ]; then
+			pidisnetdata "${p}" && echo "${p}"
 		fi
 	done
 }
@@ -631,6 +463,7 @@ netdata_pids() {
 stop_all_netdata() {
 	local p
 	for p in $(netdata_pids); do
+		# shellcheck disable=SC2086
 		stop_netdata_on_pid ${p}
 	done
 }
@@ -651,7 +484,7 @@ restart_netdata() {
 		stop_all_netdata
 		service netdata restart && started=1
 
-		if [ ${started} -eq 1 -a -z "$(netdata_pids)" ]; then
+		if [ ${started} -eq 1 ] && [ -z "$(netdata_pids)" ]; then
 			echo >&2 "Ooops! it seems netdata is not started."
 			started=0
 		fi
@@ -661,7 +494,7 @@ restart_netdata() {
 		fi
 	fi
 
-	if [ ${started} -eq 1 -a -z "$(netdata_pids)" ]; then
+	if [ ${started} -eq 1 ] && [ -z "$(netdata_pids)" ]; then
 		echo >&2 "Hm... it seems netdata is still not started."
 		started=0
 	fi
@@ -681,7 +514,7 @@ restart_netdata() {
 # install netdata logrotate
 
 install_netdata_logrotate() {
-	if [ ${UID} -eq 0 ]; then
+	if [ "${UID}" -eq 0 ]; then
 		if [ -d /etc/logrotate.d ]; then
 			if [ ! -f /etc/logrotate.d/netdata ]; then
 				run cp system/netdata.logrotate /etc/logrotate.d/netdata
@@ -699,103 +532,149 @@ install_netdata_logrotate() {
 }
 
 # -----------------------------------------------------------------------------
-# download netdata.conf
+# create netdata.conf
 
-fix_netdata_conf() {
-	local owner="${1}"
+create_netdata_conf() {
+	local path="${1}" url="${2}"
 
-	if [ "${UID}" -eq 0 ]; then
-		run chown "${owner}" "${filename}"
-	fi
-	run chmod 0664 "${filename}"
-}
-
-generate_netdata_conf() {
-	local owner="${1}" filename="${2}" url="${3}"
-
-	if [ ! -s "${filename}" ]; then
-		cat >"${filename}" <<EOFCONF
-# netdata can generate its own config.
-# Get it with:
-#
-# wget -O ${filename} "${url}"
-#
-# or
-#
-# curl -s -o ${filename} "${url}"
-#
-EOFCONF
-		fix_netdata_conf "${owner}"
+	if [ -s "${path}" ]; then
+		return 0
 	fi
-}
 
-download_netdata_conf() {
-	local owner="${1}" filename="${2}" url="${3}"
-
-	if [ ! -s "${filename}" ]; then
-		echo >&2
-		echo >&2 "-------------------------------------------------------------------------------"
-		echo >&2
+	if [ -n "$url" ]; then
 		echo >&2 "Downloading default configuration from netdata..."
 		sleep 5
 
-		# remove a possibly obsolete download
-		[ -f "${filename}.new" ] && rm "${filename}.new"
+		# remove a possibly obsolete configuration file
+		[ -f "${path}.new" ] && rm "${path}.new"
 
 		# disable a proxy to get data from the local netdata
 		export http_proxy=
 		export https_proxy=
 
-		# try curl
-		run curl -s -o "${filename}.new" "${url}"
-		ret=$?
-
-		if [ ${ret} -ne 0 -o ! -s "${filename}.new" ]; then
-			# try wget
-			run wget -O "${filename}.new" "${url}"
-			ret=$?
+		if command -v curl 1>/dev/null 2>&1; then
+			run curl -sSL --connect-timeout 10 --retry 3 "${url}" >"${path}.new"
+		elif command -v wget 1>/dev/null 2>&1; then
+			run wget -T 15 -O - "${url}" >"${path}.new"
 		fi
 
-		if [ ${ret} -eq 0 -a -s "${filename}.new" ]; then
-			run mv "${filename}.new" "${filename}"
-			run_ok "New configuration saved for you to edit at ${filename}"
+		if [ -s "${path}.new" ]; then
+			run mv "${path}.new" "${path}"
+			run_ok "New configuration saved for you to edit at ${path}"
 		else
-			[ -f "${filename}.new" ] && rm "${filename}.new"
+			[ -f "${path}.new" ] && rm "${path}.new"
 			run_failed "Cannnot download configuration from netdata daemon using url '${url}'"
-
-			generate_netdata_conf "${owner}" "${filename}" "${url}"
+			url=''
 		fi
+	fi
 
-		fix_netdata_conf "${owner}"
+	if [ -z "$url" ]; then
+		echo "# netdata can generate its own config which is available at 'http://<netdata_ip>/netdata.conf'" >"${path}"
+		echo "# You can download it with command like: 'wget -O ${path} http://localhost:19999/netdata.conf'" >>"${path}"
 	fi
+
 }
 
-# -----------------------------------------------------------------------------
-# add netdata user and group
+portable_add_user() {
+	local username="${1}" homedir="${2}"
 
-NETDATA_WANTED_GROUPS="docker nginx varnish haproxy adm nsd proxy squid ceph nobody"
-NETDATA_ADDED_TO_GROUPS=""
-add_netdata_user_and_group() {
-	local homedir="${1}" g
+	[ -z "${homedir}" ] && homedir="/tmp"
+
+    # Check if user exists
+	if cut -d ':' -f 1 </etc/passwd | grep "^${username}$" 1>/dev/null 2>&1; then
+        echo >&2 "User '${username}' already exists."
+        return 0
+    fi
 
-	if [ ${UID} -eq 0 ]; then
-		portable_add_group netdata || return 1
-		portable_add_user netdata "${homedir}" || return 1
+	echo >&2 "Adding ${username} user account with home ${homedir} ..."
 
-		for g in ${NETDATA_WANTED_GROUPS}; do
-			portable_add_user_to_group ${g} netdata && NETDATA_ADDED_TO_GROUPS="${NETDATA_ADDED_TO_GROUPS} ${g}"
-		done
+	# shellcheck disable=SC2230
+	local nologin="$(command -v nologin >/dev/null 2>&1 || echo '/bin/false')"
 
-		[ ~netdata = / ] && cat <<USERMOD
+	# Linux
+	if command -v useradd 1>/dev/null 2>&1; then
+		run useradd -r -g "${username}" -c "${username}" -s "${nologin}" --no-create-home -d "${homedir}" "${username}" && return 0
+	fi
 
-The netdata user has its home directory set to /
-You may want to change it, using this command:
+	# FreeBSD
+	if command -v pw 1>/dev/null 2>&1; then
+		run pw useradd "${username}" -d "${homedir}" -g "${username}" -s "${nologin}" && return 0
+	fi
 
-# usermod -d "${homedir}" netdata
+	# BusyBox
+	if command -v adduser 1>/dev/null 2>&1; then
+		run adduser -h "${homedir}" -s "${nologin}" -D -G "${username}" "${username}" && return 0
+	fi
 
-USERMOD
-		return 0
+	echo >&2 "Failed to add ${username} user account !"
+
+	return 1
+}
+
+portable_add_group() {
+	local groupname="${1}"
+
+    # Check if group exist
+	if cut -d ':' -f 1 </etc/group | grep "^${groupname}$" 1>/dev/null 2>&1; then
+        echo >&2 "Group '${groupname}' already exists."
+        return 0
+    fi
+
+	echo >&2 "Adding ${groupname} user group ..."
+
+	# Linux
+	if command -v groupadd 1>/dev/null 2>&1; then
+		run groupadd -r "${groupname}" && return 0
 	fi
 
+	# FreeBSD
+	if command -v pw 1>/dev/null 2>&1; then
+		run pw groupadd "${groupname}" && return 0
+	fi
+
+	# BusyBox
+	if command -v addgroup 1>/dev/null 2>&1; then
+		run addgroup "${groupname}" && return 0
+	fi
+
+	echo >&2 "Failed to add ${groupname} user group !"
 	return 1
 }
+
+portable_add_user_to_group() {
+	local groupname="${1}" username="${2}"
+
+    # Check if group exist
+	if ! cut -d ':' -f 1 </etc/group | grep "^${groupname}$" >/dev/null 2>&1; then
+        echo >&2 "Group '${groupname}' does not exist."
+        return 1
+    fi
+
+    # Check if user is in group
+	if [[ ",$(grep "^${groupname}:" </etc/group | cut -d ':' -f 4)," =~ ,${username}, ]]; then
+		# username is already there
+		echo >&2 "User '${username}' is already in group '${groupname}'."
+		return 0
+	else
+		# username is not in group
+		echo >&2 "Adding ${username} user to the ${groupname} group ..."
+
+		# Linux
+		if command -v usermod 1>/dev/null 2>&1; then
+			run usermod -a -G "${groupname}" "${username}" && return 0
+		fi
+
+		# FreeBSD
+		if command -v pw 1>/dev/null 2>&1; then
+			run pw groupmod "${groupname}" -m "${username}" && return 0
+		fi
+
+		# BusyBox
+		if command -v addgroup 1>/dev/null 2>&1; then
+			run addgroup "${username}" "${groupname}" && return 0
+		fi
+
+		echo >&2 "Failed to add user ${username} to group ${groupname} !"
+		return 1
+	fi
+}