Merging upstream version 1.17.0.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 1467 insertions, 74 deletions

diff --git a/web/server/Makefile.in b/web/server/Makefile.in
new file mode 100644
index 000000000..89ab7279b
--- /dev/null
+++ b/web/server/Makefile.in
@@ -0,0 +1,698 @@
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = web/server
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
+	$(top_srcdir)/build/m4/ax_c__generic.m4 \
+	$(top_srcdir)/build/m4/ax_c_lto.m4 \
+	$(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
+	$(top_srcdir)/build/m4/ax_c_mallopt.m4 \
+	$(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
+	$(top_srcdir)/build/m4/ax_pthread.m4 \
+	$(top_srcdir)/build/m4/jemalloc.m4 \
+	$(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_noinst_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(dist_noinst_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CUPSCONFIG = @CUPSCONFIG@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_BINARY = @CXX_BINARY@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
+IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
+JSON_CFLAGS = @JSON_CFLAGS@
+JSON_LIBS = @JSON_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
+LIBCAP_LIBS = @LIBCAP_LIBS@
+LIBCRYPTO_CFLAGS = @LIBCRYPTO_CFLAGS@
+LIBCRYPTO_LIBS = @LIBCRYPTO_LIBS@
+LIBCURL_CFLAGS = @LIBCURL_CFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
+LIBMNL_LIBS = @LIBMNL_LIBS@
+LIBMONGOC_CFLAGS = @LIBMONGOC_CFLAGS@
+LIBMONGOC_LIBS = @LIBMONGOC_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSSL_CFLAGS = @LIBSSL_CFLAGS@
+LIBSSL_LIBS = @LIBSSL_LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MATH_CFLAGS = @MATH_CFLAGS@
+MATH_LIBS = @MATH_LIBS@
+MKDIR_P = @MKDIR_P@
+NFACCT_CFLAGS = @NFACCT_CFLAGS@
+NFACCT_LIBS = @NFACCT_LIBS@
+OBJEXT = @OBJEXT@
+OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
+OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
+OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
+OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
+OPTIONAL_JSONC_LIBS = @OPTIONAL_JSONC_LIBS@
+OPTIONAL_JUDY_LIBS = @OPTIONAL_JUDY_LIBS@
+OPTIONAL_KINESIS_CFLAGS = @OPTIONAL_KINESIS_CFLAGS@
+OPTIONAL_KINESIS_LIBS = @OPTIONAL_KINESIS_LIBS@
+OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
+OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
+OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
+OPTIONAL_MATH_CFLAGS = @OPTIONAL_MATH_CFLAGS@
+OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
+OPTIONAL_MONGOC_CFLAGS = @OPTIONAL_MONGOC_CFLAGS@
+OPTIONAL_MONGOC_LIBS = @OPTIONAL_MONGOC_LIBS@
+OPTIONAL_NFACCT_CFLAGS = @OPTIONAL_NFACCT_CFLAGS@
+OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
+OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS@
+OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS@
+OPTIONAL_SSL_LIBS = @OPTIONAL_SSL_LIBS@
+OPTIONAL_UUID_CFLAGS = @OPTIONAL_UUID_CFLAGS@
+OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
+OPTIONAL_UV_LIBS = @OPTIONAL_UV_LIBS@
+OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@
+OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@
+OPTIONAL_ZLIB_CFLAGS = @OPTIONAL_ZLIB_CFLAGS@
+OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PROTOBUF_CFLAGS = @PROTOBUF_CFLAGS@
+PROTOBUF_LIBS = @PROTOBUF_LIBS@
+PROTOC = @PROTOC@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSE_CANDIDATE = @SSE_CANDIDATE@
+STRIP = @STRIP@
+UUID_CFLAGS = @UUID_CFLAGS@
+UUID_LIBS = @UUID_LIBS@
+VERSION = @VERSION@
+XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@
+XENLIGHT_LIBS = @XENLIGHT_LIBS@
+YAJL_CFLAGS = @YAJL_CFLAGS@
+YAJL_LIBS = @YAJL_LIBS@
+ZLIB_CFLAGS = @ZLIB_CFLAGS@
+ZLIB_LIBS = @ZLIB_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+ax_pthread_config = @ax_pthread_config@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_target = @build_target@
+build_vendor = @build_vendor@
+builddir = @builddir@
+cachedir = @cachedir@
+chartsdir = @chartsdir@
+configdir = @configdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+has_jemalloc = @has_jemalloc@
+has_tcmalloc = @has_tcmalloc@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libconfigdir = @libconfigdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+nodedir = @nodedir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pluginsdir = @pluginsdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pythondir = @pythondir@
+registrydir = @registrydir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+varlibdir = @varlibdir@
+webdir = @webdir@
+AUTOMAKE_OPTIONS = subdir-objects
+MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
+SUBDIRS = \
+    static \
+    $(NULL)
+
+dist_noinst_DATA = \
+	README.md \
+	$(NULL)
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu web/server/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu web/server/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic cscopelist-am ctags ctags-am \
+	distclean distclean-generic distclean-tags distdir dvi dvi-am \
+	html html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/web/server/README.md b/web/server/README.md
index 173e89596..30cb00699 100644
--- a/web/server/README.md
+++ b/web/server/README.md
@@ -22,9 +22,9 @@ With the web server enabled, you can control the number of threads and sockets w
 
 The default number of processor threads is `min(cpu cores, 6)`.
 
-The `web server max sockets` setting is automatically adjusted to 50% of the max number of open files netdata is allowed to use (via `/etc/security/limits.conf` or systemd), to allow enough file descriptors to be available for data collection.
+The `web server max sockets` setting is automatically adjusted to 50% of the max number of open files Netdata is allowed to use (via `/etc/security/limits.conf` or systemd), to allow enough file descriptors to be available for data collection.
 
-### Binding netdata to multiple ports
+### Binding Netdata to multiple ports
 
 Netdata can bind to multiple IPs and ports, offering access to different services on each. Up to 100 sockets can be used (you can increase it at compile time with `CFLAGS="-DMAX_LISTEN_FDS=200" ./netdata-installer.sh ...`).
 
@@ -36,15 +36,15 @@ The ports to bind are controlled via `[web].bind to`, like this:
    bind to = 127.0.0.1=dashboard^SSL=optional 10.1.1.1:19998=management|netdata.conf hostname:19997=badges [::]:19996=streaming^SSL=force localhost:19995=registry *:http=dashboard unix:/tmp/netdata.sock
 ```
 
-Using the above, netdata will bind to:
+Using the above, Netdata will bind to:
 
-- IPv4 127.0.0.1 at port 19999 (port was used from `default port`). Only the UI (dashboard) and the read API will be accessible on this port. Both HTTP and HTTPS requests will be accepted.
-- IPv4 10.1.1.1 at port 19998. The management API and netdata.conf will be accessible on this port.
-- All the IPs `hostname` resolves to (both IPv4 and IPv6 depending on the resolved IPs) at port 19997. Only badges will be accessible on this port.
-- All IPv6 IPs at port 19996. Only metric streaming requests from other netdata agents will be accepted on this port. Only encrypted streams will be allowed (i.e. slaves also need to be [configured for TLS](../../streaming).
-- All the IPs `localhost` resolves to (both IPv4 and IPv6 depending the resolved IPs) at port 19996. This port will only accept registry API requests.
-- All IPv4 and IPv6 IPs at port `http` as set in `/etc/services`. Only the UI (dashboard) and the read API will be accessible on this port. 
-- Unix domain socket `/tmp/netdata.sock`. All requests are serviceable on this socket.
+-   IPv4 127.0.0.1 at port 19999 (port was used from `default port`). Only the UI (dashboard) and the read API will be accessible on this port. Both HTTP and HTTPS requests will be accepted.
+-   IPv4 10.1.1.1 at port 19998. The management API and `netdata.conf` will be accessible on this port.
+-   All the IPs `hostname` resolves to (both IPv4 and IPv6 depending on the resolved IPs) at port 19997. Only badges will be accessible on this port.
+-   All IPv6 IPs at port 19996. Only metric streaming requests from other Netdata agents will be accepted on this port. Only encrypted streams will be allowed (i.e. slaves also need to be [configured for TLS](../../streaming).
+-   All the IPs `localhost` resolves to (both IPv4 and IPv6 depending the resolved IPs) at port 19996. This port will only accept registry API requests.
+-   All IPv4 and IPv6 IPs at port `http` as set in `/etc/services`. Only the UI (dashboard) and the read API will be accessible on this port. 
+-   Unix domain socket `/tmp/netdata.sock`. All requests are serviceable on this socket.
 
 The option `[web].default port` is used when an entries in `[web].bind to` do not specify a port.
 
@@ -53,21 +53,22 @@ As shown in the example above, these permissions are optional, with the default
 The request types are strings identical to the `allow X from` directives of the access lists, i.e. `dashboard`, `streaming`, `registry`, `netdata.conf`, `badges` and `management`. 
 The access lists themselves and the general setting `allow connections from` in the next section are applied regardless of the ports that are configured to provide these services. 
 The API requests are serviced as follows:
-- `dashboard` gives access to the UI, the read API and badges API calls.
-- `badges` gives access only to the badges API calls.
-- `management` gives access only to the management API calls.
+
+-   `dashboard` gives access to the UI, the read API and badges API calls.
+-   `badges` gives access only to the badges API calls.
+-   `management` gives access only to the management API calls.
 
 ### Enabling TLS support
 
 Since v1.16.0, Netdata supports encrypted HTTP connections to the web server, plus encryption of streaming data between a slave and its master, via the TLS 1.2 protocol.
 
-Inbound unix socket connections are unaffected, regardless of the TLS settings.  
+Inbound unix socket connections are unaffected, regardless of the TLS settings.\
 ??? info "Differences in TLS and SSL terminology"
     While Netdata uses Transport Layer Security (TLS) 1.2 to encrypt communications rather than the obsolete SSL protocol, it's still common practice to refer to encrypted web connections as `SSL`. Many vendors, like Nginx and even Netdata itself, use `SSL` in configuration files, whereas documentation will always refer to encrypted communications as `TLS` or `TLS/SSL`.
 
 To enable TLS, provide the path to your certificate and private key in the `[web]` section of `netdata.conf`:
 
-``` conf
+```conf
 [web]
 	ssl key = /etc/netdata/ssl/key.pem
 	ssl certificate = /etc/netdata/ssl/cert.pem
@@ -77,31 +78,31 @@ Both files must be readable by the `netdata` user. If either of these files do n
 
 For test purposes, you can generate self-signed certificates with the following command:
 
-``` bash
+```bash
 $ openssl req -newkey rsa:2048 -nodes -sha512 -x509 -days 365 -keyout key.pem -out cert.pem
 ```
 
 !!! note
     If you use 4096 bits for your key and the certificate, Netdata will need more CPU to process the communication. `rsa4096` can be up to 4 times slower than `rsa2048`, so we recommend using 2048 bits. You can verify the difference by running:
- 
-    ```
-    $ openssl speed rsa2048 rsa4096
-    ```
+
+```sh
+$ openssl speed rsa2048 rsa4096
+```
 
 #### TLS/SSL enforcement
 
 When the certificates are defined and unless any other options are provided, a Netdata server will:
 
-- Redirect all incoming HTTP web server requests to HTTPS. Applies to the dashboard, the API, netdata.conf and badges.
-- Allow incoming slave connections to use both unencrypted and encrypted communications for streaming.
- 
+-   Redirect all incoming HTTP web server requests to HTTPS. Applies to the dashboard, the API, `netdata.conf` and badges.
+-   Allow incoming slave connections to use both unencrypted and encrypted communications for streaming.
+
 To change this behavior, you need to modify the `bind to` setting in the `[web]` section of `netdata.conf`. At the end of each port definition, you can append `^SSL=force` or `^SSL=optional`. What happens with these settings differs, depending on whether the port is used for HTTP/S requests, or for streaming.
 
-SSL setting | HTTP requests | HTTPS requests | Unencrypted Streams | Encrypted Streams 
-:------:|:-----:|:-----:|:-----:|:-------- 
-none | Redirected to HTTPS | Accepted | Accepted | Accepted
-`force` | Redirected to HTTPS | Accepted | Denied | Accepted
-`optional` | Accepted | Accepted | Accepted | Accepted
+|SSL setting|HTTP requests|HTTPS requests|Unencrypted Streams|Encrypted Streams|
+|:---------:|:-----------:|:------------:|:-----------------:|:----------------|
+|none|Redirected to HTTPS|Accepted|Accepted|Accepted|
+|`force`|Redirected to HTTPS|Accepted|Denied|Accepted|
+|`optional`|Accepted|Accepted|Accepted|Accepted|
 
 Example:
 
@@ -121,10 +122,10 @@ When we define the use of SSL in a Netdata agent for different ports,  Netdata w
 
 Netdata will:
 
-- Force all HTTP requests to the default port to be redirected to HTTPS (same port).
-- Refuse unencrypted streaming connections from slaves on the default port.
-- Allow both HTTP and HTTPS requests to port 20000 for netdata.conf
-- Force HTTP requests to port 20001 to be redirected to HTTPS (same port). Only allow requests for the dashboard, the read API and the registry on port 20001.
+-   Force all HTTP requests to the default port to be redirected to HTTPS (same port).
+-   Refuse unencrypted streaming connections from slaves on the default port.
+-   Allow both HTTP and HTTPS requests to port 20000 for `netdata.conf`
+-   Force HTTP requests to port 20001 to be redirected to HTTPS (same port). Only allow requests for the dashboard, the read API and the registry on port 20001.
 
 #### TLS/SSL errors
 
@@ -150,51 +151,50 @@ Netdata supports access lists in `netdata.conf`:
 
 `*` does string matches on the IPs of the clients.
 
-- `allow connections from` matches anyone that connects on the netdata port(s).
-   So, if someone is not allowed, it will be connected and disconnected immediately, without reading even
-   a single byte from its connection. This is a global settings with higher priority to any of the ones below.
+-   `allow connections from` matches anyone that connects on the Netdata port(s).
+     So, if someone is not allowed, it will be connected and disconnected immediately, without reading even
+     a single byte from its connection. This is a global settings with higher priority to any of the ones below.
 
-- `allow dashboard from` receives the request and examines if it is a static dashboard file or an API call the
-   dashboards do.
+-   `allow dashboard from` receives the request and examines if it is a static dashboard file or an API call the
+     dashboards do.
 
-- `allow badges from` checks if the API request is for a badge. Badges are not matched by `allow dashboard from`.
+-   `allow badges from` checks if the API request is for a badge. Badges are not matched by `allow dashboard from`.
 
-- `allow streaming from` checks if the slave willing to stream metrics to this netdata is allowed.
-   This can be controlled per API KEY and MACHINE GUID in [stream.conf](../../streaming/stream.conf).
-   The setting in `netdata.conf` is checked before the ones in [stream.conf](../../streaming/stream.conf).
+-   `allow streaming from` checks if the slave willing to stream metrics to this Netdata is allowed.
+     This can be controlled per API KEY and MACHINE GUID in [stream.conf](../../streaming/stream.conf).
+     The setting in `netdata.conf` is checked before the ones in [stream.conf](../../streaming/stream.conf).
 
-- `allow netdata.conf from` checks the IP to allow `http://netdata.host:19999/netdata.conf`.
-   The IPs listed are all the private IPv4 addresses, including link local IPv6 addresses. Keep in mind that connections to netdata API ports are filtered by `allow connections from`. So, IPs allowed by `allow netdata.conf from` should also be allowed by `allow connections from`.
+-   `allow netdata.conf from` checks the IP to allow `http://netdata.host:19999/netdata.conf`.
+     The IPs listed are all the private IPv4 addresses, including link local IPv6 addresses. Keep in mind that connections to Netdata API ports are filtered by `allow connections from`. So, IPs allowed by `allow netdata.conf from` should also be allowed by `allow connections from`.
 
-- `allow management from` checks the IPs to allow API management calls. Management via the API is currently supported for [health](../api/health/#health-management-api)
+-   `allow management from` checks the IPs to allow API management calls. Management via the API is currently supported for [health](../api/health/#health-management-api)
 
 ### Other netdata.conf [web] section options
-setting | default | info
-:------:|:-------:|:----
-ses max window | `15` | See [single exponential smoothing](../api/queries/des/)
-des max window | `15` | See [double exponential smoothing](../api/queries/des/)
-listen backlog | `4096` | The port backlog. Check `man 2 listen`.
-web files owner | `netdata` | The user that owns the web static files. Netdata will refuse to serve a file that is not owned by this user, even if it has read access to that file. If the user given is not found, netdata will only serve files owned by user given in `run as user`.
-web files group | `netdata` | If this is set, Netdata will check if the file is owned by this group and refuse to serve the file if it's not.
-disconnect idle clients after seconds | `60` | The time in seconds to disconnect web clients after being totally idle.
-timeout for first request | `60` | How long to wait for a client to send a request before closing the socket. Prevents slow request attacks.
-accept a streaming request every seconds | `0` | Can be used to set a limit on how often a master Netdata server will accept streaming requests from the slaves in a [streaming and replication setup](../../streaming)
-respect do not track policy | `no` | If set to `yes`, will respect the client's browser preferences on storing cookies. 
-x-frame-options response header |  | [Avoid clickjacking attacks, by ensuring that the content is not embedded into other sites](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-Frame-Options).
-enable gzip compression | `yes` | When set to `yes`, netdata web responses will be GZIP compressed, if the web client accepts such responses. 
-gzip compression strategy | `default` | Valid strategies are `default`, `filtered`, `huffman only`, `rle` and `fixed`
-gzip compression level | `3` | Valid levels are 1 (fastest) to 9 (best ratio)
 
+|setting|default|info|
+|:-----:|:-----:|:---|
+|ses max window|`15`|See [single exponential smoothing](../api/queries/des/)|
+|des max window|`15`|See [double exponential smoothing](../api/queries/des/)|
+|listen backlog|`4096`|The port backlog. Check `man 2 listen`.|
+|web files owner|`netdata`|The user that owns the web static files. Netdata will refuse to serve a file that is not owned by this user, even if it has read access to that file. If the user given is not found, Netdata will only serve files owned by user given in `run as user`.|
+|web files group|`netdata`|If this is set, Netdata will check if the file is owned by this group and refuse to serve the file if it's not.|
+|disconnect idle clients after seconds|`60`|The time in seconds to disconnect web clients after being totally idle.|
+|timeout for first request|`60`|How long to wait for a client to send a request before closing the socket. Prevents slow request attacks.|
+|accept a streaming request every seconds|`0`|Can be used to set a limit on how often a master Netdata server will accept streaming requests from the slaves in a [streaming and replication setup](../../streaming)|
+|respect do not track policy|`no`|If set to `yes`, will respect the client's browser preferences on storing cookies.|
+|x-frame-options response header||[Avoid clickjacking attacks, by ensuring that the content is not embedded into other sites](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/X-Frame-Options).|
+|enable gzip compression|`yes`|When set to `yes`, Netdata web responses will be GZIP compressed, if the web client accepts such responses.|
+|gzip compression strategy|`default`|Valid strategies are `default`, `filtered`, `huffman only`, `rle` and `fixed`|
+|gzip compression level|`3`|Valid levels are 1 (fastest) to 9 (best ratio)|
 
 ## DDoS protection
 
-If you publish your netdata to the internet, you may want to apply some protection against DDoS:
-
-1. Use the `static-threaded` web server (it is the default)
-2. Use reasonable `[web].web server max sockets` (the default is)
-3. Don't use all your cpu cores for netdata (lower `[web].web server threads`)
-4. Run netdata with a low process scheduling priority (the default is the lowest)
-5. If possible, proxy netdata via a full featured web server (nginx, apache, etc)
+If you publish your Netdata to the internet, you may want to apply some protection against DDoS:
 
+1.  Use the `static-threaded` web server (it is the default)
+2.  Use reasonable `[web].web server max sockets` (the default is)
+3.  Don't use all your CPU cores for Netdata (lower `[web].web server threads`)
+4.  Run the `netdata` process with a low process scheduling priority (the default is the lowest)
+5.  If possible, proxy Netdata via a full featured web server (nginx, apache, etc)
 
-[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fweb%2Fserver%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fweb%2Fserver%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
diff --git a/web/server/static/Makefile.in b/web/server/static/Makefile.in
new file mode 100644
index 000000000..8078caaf3
--- /dev/null
+++ b/web/server/static/Makefile.in
@@ -0,0 +1,697 @@
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = web/server/static
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/build/m4/ax_c___atomic.m4 \
+	$(top_srcdir)/build/m4/ax_c__generic.m4 \
+	$(top_srcdir)/build/m4/ax_c_lto.m4 \
+	$(top_srcdir)/build/m4/ax_c_mallinfo.m4 \
+	$(top_srcdir)/build/m4/ax_c_mallopt.m4 \
+	$(top_srcdir)/build/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/build/m4/ax_gcc_func_attribute.m4 \
+	$(top_srcdir)/build/m4/ax_pthread.m4 \
+	$(top_srcdir)/build/m4/jemalloc.m4 \
+	$(top_srcdir)/build/m4/tcmalloc.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_noinst_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(dist_noinst_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CUPSCONFIG = @CUPSCONFIG@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_BINARY = @CXX_BINARY@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPMIMONITORING_CFLAGS = @IPMIMONITORING_CFLAGS@
+IPMIMONITORING_LIBS = @IPMIMONITORING_LIBS@
+JSON_CFLAGS = @JSON_CFLAGS@
+JSON_LIBS = @JSON_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBCAP_CFLAGS = @LIBCAP_CFLAGS@
+LIBCAP_LIBS = @LIBCAP_LIBS@
+LIBCRYPTO_CFLAGS = @LIBCRYPTO_CFLAGS@
+LIBCRYPTO_LIBS = @LIBCRYPTO_LIBS@
+LIBCURL_CFLAGS = @LIBCURL_CFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBMNL_CFLAGS = @LIBMNL_CFLAGS@
+LIBMNL_LIBS = @LIBMNL_LIBS@
+LIBMONGOC_CFLAGS = @LIBMONGOC_CFLAGS@
+LIBMONGOC_LIBS = @LIBMONGOC_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSSL_CFLAGS = @LIBSSL_CFLAGS@
+LIBSSL_LIBS = @LIBSSL_LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MATH_CFLAGS = @MATH_CFLAGS@
+MATH_LIBS = @MATH_LIBS@
+MKDIR_P = @MKDIR_P@
+NFACCT_CFLAGS = @NFACCT_CFLAGS@
+NFACCT_LIBS = @NFACCT_LIBS@
+OBJEXT = @OBJEXT@
+OPTIONAL_CUPS_CFLAGS = @OPTIONAL_CUPS_CFLAGS@
+OPTIONAL_CUPS_LIBS = @OPTIONAL_CUPS_LIBS@
+OPTIONAL_IPMIMONITORING_CFLAGS = @OPTIONAL_IPMIMONITORING_CFLAGS@
+OPTIONAL_IPMIMONITORING_LIBS = @OPTIONAL_IPMIMONITORING_LIBS@
+OPTIONAL_JSONC_LIBS = @OPTIONAL_JSONC_LIBS@
+OPTIONAL_JUDY_LIBS = @OPTIONAL_JUDY_LIBS@
+OPTIONAL_KINESIS_CFLAGS = @OPTIONAL_KINESIS_CFLAGS@
+OPTIONAL_KINESIS_LIBS = @OPTIONAL_KINESIS_LIBS@
+OPTIONAL_LIBCAP_CFLAGS = @OPTIONAL_LIBCAP_CFLAGS@
+OPTIONAL_LIBCAP_LIBS = @OPTIONAL_LIBCAP_LIBS@
+OPTIONAL_LZ4_LIBS = @OPTIONAL_LZ4_LIBS@
+OPTIONAL_MATH_CFLAGS = @OPTIONAL_MATH_CFLAGS@
+OPTIONAL_MATH_LIBS = @OPTIONAL_MATH_LIBS@
+OPTIONAL_MONGOC_CFLAGS = @OPTIONAL_MONGOC_CFLAGS@
+OPTIONAL_MONGOC_LIBS = @OPTIONAL_MONGOC_LIBS@
+OPTIONAL_NFACCT_CFLAGS = @OPTIONAL_NFACCT_CFLAGS@
+OPTIONAL_NFACCT_LIBS = @OPTIONAL_NFACCT_LIBS@
+OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_CFLAGS@
+OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS = @OPTIONAL_PROMETHEUS_REMOTE_WRITE_LIBS@
+OPTIONAL_SSL_LIBS = @OPTIONAL_SSL_LIBS@
+OPTIONAL_UUID_CFLAGS = @OPTIONAL_UUID_CFLAGS@
+OPTIONAL_UUID_LIBS = @OPTIONAL_UUID_LIBS@
+OPTIONAL_UV_LIBS = @OPTIONAL_UV_LIBS@
+OPTIONAL_XENSTAT_CFLAGS = @OPTIONAL_XENSTAT_CFLAGS@
+OPTIONAL_XENSTAT_LIBS = @OPTIONAL_XENSTAT_LIBS@
+OPTIONAL_ZLIB_CFLAGS = @OPTIONAL_ZLIB_CFLAGS@
+OPTIONAL_ZLIB_LIBS = @OPTIONAL_ZLIB_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RPM_VERSION = @PACKAGE_RPM_VERSION@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PROTOBUF_CFLAGS = @PROTOBUF_CFLAGS@
+PROTOBUF_LIBS = @PROTOBUF_LIBS@
+PROTOC = @PROTOC@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSE_CANDIDATE = @SSE_CANDIDATE@
+STRIP = @STRIP@
+UUID_CFLAGS = @UUID_CFLAGS@
+UUID_LIBS = @UUID_LIBS@
+VERSION = @VERSION@
+XENLIGHT_CFLAGS = @XENLIGHT_CFLAGS@
+XENLIGHT_LIBS = @XENLIGHT_LIBS@
+YAJL_CFLAGS = @YAJL_CFLAGS@
+YAJL_LIBS = @YAJL_LIBS@
+ZLIB_CFLAGS = @ZLIB_CFLAGS@
+ZLIB_LIBS = @ZLIB_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+ax_pthread_config = @ax_pthread_config@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_target = @build_target@
+build_vendor = @build_vendor@
+builddir = @builddir@
+cachedir = @cachedir@
+chartsdir = @chartsdir@
+configdir = @configdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+has_jemalloc = @has_jemalloc@
+has_tcmalloc = @has_tcmalloc@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libconfigdir = @libconfigdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+nodedir = @nodedir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pluginsdir = @pluginsdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pythondir = @pythondir@
+registrydir = @registrydir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+varlibdir = @varlibdir@
+webdir = @webdir@
+AUTOMAKE_OPTIONS = subdir-objects
+MAINTAINERCLEANFILES = $(srcdir)/Makefile.in
+SUBDIRS = \
+    $(NULL)
+
+dist_noinst_DATA = \
+	README.md \
+	$(NULL)
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu web/server/static/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu web/server/static/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic cscopelist-am ctags ctags-am \
+	distclean distclean-generic distclean-tags distdir dvi dvi-am \
+	html html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/web/server/static/README.md b/web/server/static/README.md
index 653b364bc..eeba0e94d 100644
--- a/web/server/static/README.md
+++ b/web/server/static/README.md
@@ -7,4 +7,4 @@ The kernel distributes the incoming requests to them.
 Each thread uses non-blocking I/O so it can serve any number of web requests in parallel.
 
 This web server respects the `keep-alive` HTTP header to serve multiple HTTP requests via the same connection. 
-[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fweb%2Fserver%2Fstatic%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)]()
+[![analytics](https://www.google-analytics.com/collect?v=1&aip=1&t=pageview&_s=1&ds=github&dr=https%3A%2F%2Fgithub.com%2Fnetdata%2Fnetdata&dl=https%3A%2F%2Fmy-netdata.io%2Fgithub%2Fweb%2Fserver%2Fstatic%2FREADME&_u=MAC~&cid=5792dfd7-8dc4-476b-af31-da2fdb9f93d2&tid=UA-64295674-3)](<>)
diff --git a/web/server/web_client.c b/web/server/web_client.c
index 2da6c1dec..908e3a6a9 100644
--- a/web/server/web_client.c
+++ b/web/server/web_client.c
@@ -929,7 +929,6 @@ void web_client_split_path_query(struct web_client *w, char *s) {
 
     w->separator = 0x00;
     w->url_path_length = strlen(s);
-    w->url_search_path = NULL;
 }
 
 /**
@@ -1035,20 +1034,22 @@ static inline HTTP_VALIDATION http_request_validate(struct web_client *w) {
                 // a valid complete HTTP request found
 
                 *ue = '\0';
+                //This is to avoid crash in line
+                w->url_search_path = NULL;
                 if(w->mode != WEB_CLIENT_MODE_NORMAL) {
                     if(!url_decode_r(w->decoded_url, encoded_url, NETDATA_WEB_REQUEST_URL_SIZE + 1))
                         return HTTP_VALIDATION_MALFORMED_URL;
                 } else {
                     web_client_split_path_query(w, encoded_url);
 
-                    if (w->separator) {
+                    if (w->url_search_path && w->separator) {
                         *w->url_search_path = 0x00;
                     }
 
                     if(!url_decode_r(w->decoded_url, encoded_url, NETDATA_WEB_REQUEST_URL_SIZE + 1))
                         return HTTP_VALIDATION_MALFORMED_URL;
 
-                    if (w->separator) {
+                    if (w->url_search_path && w->separator) {
                         *w->url_search_path = w->separator;
 
                         char *from = (encoded_url + w->url_path_length);
@@ -1064,9 +1065,6 @@ static inline HTTP_VALIDATION http_request_validate(struct web_client *w) {
                 // copy the URL - we are going to overwrite parts of it
                 // TODO -- ideally we we should avoid copying buffers around
                 strncpyz(w->last_url, w->decoded_url, NETDATA_WEB_REQUEST_URL_SIZE);
-                if (w->separator) {
-                    *w->url_search_path = 0x00;
-                }
 #ifdef ENABLE_HTTPS
                 if ( (!web_client_check_unix(w)) && (netdata_srv_ctx) ) {
                     if ((w->ssl.conn) && ((w->ssl.flags & NETDATA_SSL_NO_HANDSHAKE) && (web_client_is_using_ssl_force(w) || web_client_is_using_ssl_default(w)) && (w->mode != WEB_CLIENT_MODE_STREAM))  ) {