diff options
Diffstat (limited to 'charts.d/nut.chart.sh')
| -rw-r--r-- | charts.d/nut.chart.sh | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/charts.d/nut.chart.sh b/charts.d/nut.chart.sh deleted file mode 100644 index 6137639f..00000000 --- a/charts.d/nut.chart.sh +++ /dev/null @@ -1,222 +0,0 @@ -# no need for shebang - this file is loaded from charts.d.plugin - -# netdata -# real-time performance and health monitoring, done right! -# (C) 2016-2017 Costa Tsaousis <costa@tsaousis.gr> -# GPL v3+ -# - -# a space separated list of UPS names -# if empty, the list returned by 'upsc -l' will be used -nut_ups= - -# how frequently to collect UPS data -nut_update_every=2 - -# how much time in seconds, to wait for nut to respond -nut_timeout=2 - -# set this to 1, to enable another chart showing the number -# of UPS clients connected to upsd -nut_clients_chart=0 - -# the priority of nut related to other charts -nut_priority=90000 - -declare -A nut_ids=() - -nut_get_all() { - run -t $nut_timeout upsc -l -} - -nut_get() { - run -t $nut_timeout upsc "$1" - - if [ "${nut_clients_chart}" -eq "1" ] - then - printf "ups.connected_clients: " - run -t $nut_timeout upsc -c "$1" | wc -l - fi -} - -nut_check() { - - # this should return: - # - 0 to enable the chart - # - 1 to disable the chart - - local x - - require_cmd upsc || return 1 - - [ -z "$nut_ups" ] && nut_ups="$( nut_get_all )" - - for x in $nut_ups - do - nut_get "$x" >/dev/null - if [ $? -eq 0 ] - then - nut_ids[$x]="$( fixid "$x" )" - continue - fi - error "cannot get information for NUT UPS '$x'." - done - - if [ ${#nut_ids[@]} -eq 0 ] - then - error "Cannot find UPSes - please set nut_ups='ups_name' in $confd/nut.conf" - return 1 - fi - - return 0 -} - -nut_create() { - # create the charts - local x - - for x in "${nut_ids[@]}" - do - cat <<EOF -CHART nut_$x.charge '' "UPS Charge" "percentage" ups nut.charge area $((nut_priority + 1)) $nut_update_every -DIMENSION battery_charge charge absolute 1 100 - -CHART nut_$x.battery_voltage '' "UPS Battery Voltage" "Volts" ups nut.battery.voltage line $((nut_priority + 2)) $nut_update_every -DIMENSION battery_voltage voltage absolute 1 100 -DIMENSION battery_voltage_high high absolute 1 100 -DIMENSION battery_voltage_low low absolute 1 100 -DIMENSION battery_voltage_nominal nominal absolute 1 100 - -CHART nut_$x.input_voltage '' "UPS Input Voltage" "Volts" input nut.input.voltage line $((nut_priority + 3)) $nut_update_every -DIMENSION input_voltage voltage absolute 1 100 -DIMENSION input_voltage_fault fault absolute 1 100 -DIMENSION input_voltage_nominal nominal absolute 1 100 - -CHART nut_$x.input_current '' "UPS Input Current" "Ampere" input nut.input.current line $((nut_priority + 4)) $nut_update_every -DIMENSION input_current_nominal nominal absolute 1 100 - -CHART nut_$x.input_frequency '' "UPS Input Frequency" "Hz" input nut.input.frequency line $((nut_priority + 5)) $nut_update_every -DIMENSION input_frequency frequency absolute 1 100 -DIMENSION input_frequency_nominal nominal absolute 1 100 - -CHART nut_$x.output_voltage '' "UPS Output Voltage" "Volts" output nut.output.voltage line $((nut_priority + 6)) $nut_update_every -DIMENSION output_voltage voltage absolute 1 100 - -CHART nut_$x.load '' "UPS Load" "percentage" ups nut.load area $((nut_priority)) $nut_update_every -DIMENSION load load absolute 1 100 - -CHART nut_$x.temp '' "UPS Temperature" "temperature" ups nut.temperature line $((nut_priority + 7)) $nut_update_every -DIMENSION temp temp absolute 1 100 -EOF - - if [ "${nut_clients_chart}" = "1" ] - then - cat <<EOF2 -CHART nut_$x.clients '' "UPS Connected Clients" "clients" ups nut.clients area $((nut_priority + 8)) $nut_update_every -DIMENSION clients '' absolute 1 1 -EOF2 - fi - - done - - return 0 -} - - -nut_update() { - # the first argument to this function is the microseconds since last update - # pass this parameter to the BEGIN statement (see bellow). - - # do all the work to collect / calculate the values - # for each dimension - # remember: KEEP IT SIMPLE AND SHORT - - local i x - for i in "${!nut_ids[@]}" - do - x="${nut_ids[$i]}" - nut_get "$i" | awk " -BEGIN { - battery_charge = 0; - battery_voltage = 0; - battery_voltage_high = 0; - battery_voltage_low = 0; - battery_voltage_nominal = 0; - input_voltage = 0; - input_voltage_fault = 0; - input_voltage_nominal = 0; - input_current_nominal = 0; - input_frequency = 0; - input_frequency_nominal = 0; - output_voltage = 0; - load = 0; - temp = 0; - client = 0; - do_clients = ${nut_clients_chart}; -} -/^battery.charge: .*/ { battery_charge = \$2 * 100 }; -/^battery.voltage: .*/ { battery_voltage = \$2 * 100 }; -/^battery.voltage.high: .*/ { battery_voltage_high = \$2 * 100 }; -/^battery.voltage.low: .*/ { battery_voltage_low = \$2 * 100 }; -/^battery.voltage.nominal: .*/ { battery_voltage_nominal = \$2 * 100 }; -/^input.voltage: .*/ { input_voltage = \$2 * 100 }; -/^input.voltage.fault: .*/ { input_voltage_fault = \$2 * 100 }; -/^input.voltage.nominal: .*/ { input_voltage_nominal = \$2 * 100 }; -/^input.current.nominal: .*/ { input_current_nominal = \$2 * 100 }; -/^input.frequency: .*/ { input_frequency = \$2 * 100 }; -/^input.frequency.nominal: .*/ { input_frequency_nominal = \$2 * 100 }; -/^output.voltage: .*/ { output_voltage = \$2 * 100 }; -/^ups.load: .*/ { load = \$2 * 100 }; -/^ups.temperature: .*/ { temp = \$2 * 100 }; -/^ups.connected_clients: .*/ { clients = \$2 }; -END { - print \"BEGIN nut_$x.charge $1\"; - print \"SET battery_charge = \" battery_charge; - print \"END\" - - print \"BEGIN nut_$x.battery_voltage $1\"; - print \"SET battery_voltage = \" battery_voltage; - print \"SET battery_voltage_high = \" battery_voltage_high; - print \"SET battery_voltage_low = \" battery_voltage_low; - print \"SET battery_voltage_nominal = \" battery_voltage_nominal; - print \"END\" - - print \"BEGIN nut_$x.input_voltage $1\"; - print \"SET input_voltage = \" input_voltage; - print \"SET input_voltage_fault = \" input_voltage_fault; - print \"SET input_voltage_nominal = \" input_voltage_nominal; - print \"END\" - - print \"BEGIN nut_$x.input_current $1\"; - print \"SET input_current_nominal = \" input_current_nominal; - print \"END\" - - print \"BEGIN nut_$x.input_frequency $1\"; - print \"SET input_frequency = \" input_frequency; - print \"SET input_frequency_nominal = \" input_frequency_nominal; - print \"END\" - - print \"BEGIN nut_$x.output_voltage $1\"; - print \"SET output_voltage = \" output_voltage; - print \"END\" - - print \"BEGIN nut_$x.load $1\"; - print \"SET load = \" load; - print \"END\" - - print \"BEGIN nut_$x.temp $1\"; - print \"SET temp = \" temp; - print \"END\" - - if(do_clients) { - print \"BEGIN nut_$x.clients $1\"; - print \"SET clients = \" clients; - print \"END\" - } -}" - [ $? -ne 0 ] && unset nut_ids[$i] && error "failed to get values for '$i', disabling it." - done - - [ ${#nut_ids[@]} -eq 0 ] && error "no UPSes left active." && return 1 - return 0 -} |